AI Art Detector

AI Art Detector — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

  • Butler in a Box

    Butler in a Box

    Butler in a Box was an early voice-controlled home automation device developed in 1983 by magician Gus Searcy and programmer Franz Kavan. The device allowed users to control various home electronics, such as lights and phones, using voice commands. It predated modern smart speakers and virtual assistants by several decades. == History == The idea for the Butler in a Box originated in 1983 when Searcy was asked by friends why he couldn't simply command lights to turn on and off if he could pull rabbits out of hats, given his background as a professional magician. Searcy partnered with former IBM programmer Kavan to develop the device, with their first prototype being named "Sidney". The Butler in a Box combined remote control technology with voice recognition to enable control of home devices. However, it faced challenges due to the technological limitations of the era and its high price point of nearly $1,500 (equivalent to around $3,700 in 2021). == Features and functionality == Users could activate the Butler in a Box by speaking a wake word, typically a traditional butler name, and the device would address the user as "boss". It was capable of performing tasks such as: Turning lights on and off, controlling individual zones if lights were connected to remote control modules Making and receiving phone calls Setting timers Pairing with sensors to function as a security alarm system However, the device required extensive voice training for each user, a time-consuming process compared to modern voice recognition. Additionally, settings and trained commands would be lost if power was out for over 3 hours due to the volatile memory technology used at the time. == Reception and legacy == While innovative for its time, the Butler in a Box did not achieve widespread commercial success due to its high price and the technical limitations of the 1980s. Nevertheless, it served as an important early step in the development of home automation and showcased the potential for voice-controlled technology to enhance accessibility and convenience in the home. Decades later, products like Amazon Alexa, Google Home, and Apple's Siri would make voice-controlled smart home devices commonplace and affordable, building on the groundwork laid by early attempts like the Butler in a Box.

    Read more →
  • Artificial Intelligence Applications Institute

    Artificial Intelligence Applications Institute

    The Artificial Intelligence Applications Institute (AIAI) at the School of Informatics at the University of Edinburgh is a non-profit technology transfer organisation that promoted research in the field of artificial intelligence. == History == The Artificial Intelligence Applications Institute (AIAI) was founded in 1983 at the University of Edinburgh as a specialist research and technology-transfer unit focusing on the practical uses of artificial intelligence (AI). The institute was established by Professor Jim Howe and colleagues from the Science and Engineering Research Council (SERC) Special Interest Group in AI in the Department of Artificial Intelligence, with a mission to apply AI techniques to solve real-world industrial and governmental problems. Under the directorship of Austin Tate, who served from 1985 to 2019, AIAI became one of the leading UK research centres devoted to AI programming systems, intelligent planning systems, decision support, and knowledge-based engineering. It collaborated with both academic partners and international organisations such as the European Space Agency and the UK Ministry of Defence. In 2001, AIAI joined the newly created Centre for Intelligent Systems and their Applications (CISA) within the University's School of Informatics. In December 2019, the institute was renamed the Artificial Intelligence and its Applications Institute to reflect a broader integration of fundamental and applied AI research. == Research programmes == AIAI’s research spans multiple areas of artificial intelligence, including: AI programming Systems - Edinburgh Prolog, Edinburgh Common Lisp, Logo; Knowledge representation and reasoning – development of ontologies, rule-based inference, and semantic modelling; Automated planning and scheduling – intelligent task management systems used in aerospace, manufacturing, and emergency response; Natural language processing and intelligent agents – interaction frameworks for human–computer collaboration; AI ethics and decision-making – research into responsible deployment and evaluation of autonomous systems. The institute also contributes to interdisciplinary fields such as computational creativity, explainable AI, and human–AI interaction. AIAI maintains close collaboration with the Bayes Centre and the Alan Turing Institute through joint research programmes and doctoral training initiatives. == Technology transfer and impact == From its inception, AIAI has combined academic research with technology-transfer activity, offering professional training, industrial consultancy, and bespoke software systems. It pioneered one of the earliest knowledge-based project-management systems, O-Plan, later evolved into the I-Plan framework used for autonomous planning and workflow management.

    Read more →
  • BuildingSMART Data Dictionary

    BuildingSMART Data Dictionary

    buildingSMART Data Dictionary (bSDD) is a service provided by buildingSMART which offers free data dictionaries for the international standardization of construction planning. The structure of bSDD was defined by the Nonprofit organization Buildingsmart and is used to describe objects and their attributes in a BIM process. == Aim == The aim of bSDD is to enable architects and planners to exchange and share building data across different specialists and language boundaries and thus avoid misunderstandings caused by different interpretations of terms. The bSDD standard extends the more general IFC. Software developers can access and use the dictionaries. In May 2025 over 300 dictionaries are available, including IFC, extensions to it such as Airport Domain IFC extension module or classification systems like Uniclass. == Structure == The main structural parts of bSDD are: Dictionary: A dictionary is a collection of classes: Class: A class describes the various object types, such as Bag drop or Baggage conveyor in airport planning. A class contains properties: Property: A property describes a part of a class, e.g. color or weight. Related properties are organized in a group: GroupOfProperties: A group organizes related properties, e.g. environmental properties or electrical properties. == Creating and managing a directory == Every dictionary in bSDD must be published in the name of a registered organization. As soon as the content is activated, it receives an unchangeable URI. This means that the content remains permanently in bSDD and cannot be deleted - this ensures stable use of the dictionary. It is only possible to change the status to inactive if it is no longer to be used - however, the dictionary remains permanently.

    Read more →
  • Information seeking

    Information seeking

    Information seeking is the process or activity of attempting to obtain information in both human and technological contexts. Information seeking is related to, but different from, information retrieval (IR). == Compared to information retrieval == Traditionally, IR tools have been designed for IR professionals to enable them to effectively and efficiently retrieve information from a source. It is assumed that the information exists in the source and that a well-formed query will retrieve it (and nothing else). It has been argued that laypersons' information seeking on the internet is very different from information retrieval as performed within the IR discourse. Yet, internet search engines are built on IR principles. Since the late 1990s a body of research on how casual users interact with internet search engines has been forming, but the topic is far from fully understood. IR can be said to be technology-oriented, focusing on algorithms and issues such as precision and recall. Information seeking may be understood as a more human-oriented and open-ended process than information retrieval. In information seeking, one does not know whether there exists an answer to one's query, so the process of seeking may provide the learning required to satisfy one's information need. == In different contexts == Much library and information science (LIS) research has focused on the information-seeking practices of practitioners within various fields of professional work. Studies have been carried out into the information-seeking behaviors of librarians, academics, medical professionals, engineers, lawyers and mini-publics(among others). Much of this research has drawn on the work done by Leckie, Pettigrew (now Fisher) and Sylvain, who in 1996 conducted an extensive review of the LIS literature (as well as the literature of other academic fields) on professionals' information seeking. The authors proposed an analytic model of professionals' information seeking behaviour, intended to be generalizable across the professions, thus providing a platform for future research in the area. The model was intended to "prompt new insights... and give rise to more refined and applicable theories of information seeking" (1996, p. 188). The model has been adapted by Wilkinson (2001) who proposes a model of the information seeking of lawyers. Recent studies in this topic address the concept of information-gathering that "provides a broader perspective that adheres better to professionals' work-related reality and desired skills." (Solomon & Bronstein, 2021). == Theories of information-seeking behavior == A variety of theories of information behavior – e.g. Zipf's Principle of Least Effort, Brenda Dervin's Sense Making, Elfreda Chatman's Life in the Round – seek to understand the processes that surround information seeking. In addition, many theories from other disciplines have been applied in investigating an aspect or whole process of information seeking behavior. A review of the literature on information seeking behavior shows that information seeking has generally been accepted as dynamic and non-linear (Foster, 2005; Kuhlthau 2006). People experience the information search process as an interplay of thoughts, feelings and actions (Kuhlthau, 2006). Donald O. Case (2007) also wrote a good book that is a review of the literature. Information seeking has been found to be linked to a variety of interpersonal communication behaviors beyond question-asking, to include strategies such as candidate answers. Robinson's (2010) research suggests that when seeking information at work, people rely on both other people and information repositories (e.g., documents and databases), and spend similar amounts of time consulting each (7.8% and 6.4% of work time, respectively; 14.2% in total). However, the distribution of time among the constituent information seeking stages differs depending on the source. When consulting other people, people spend less time locating the information source and information within that source, similar time understanding the information, and more time problem solving and decision making, than when consulting information repositories. Furthermore, the research found that people spend substantially more time receiving information passively (i.e., information that they have not requested) than actively (i.e., information that they have requested), and this pattern is also reflected when they provide others with information. == Wilson's nested model of conceptual areas == The concepts of information seeking, information retrieval, and information behaviour are objects of investigation of information science. Within this scientific discipline a variety of studies has been undertaken analyzing the interaction of an individual with information sources in case of a specific information need, task, and context. The research models developed in these studies vary in their level of scope. Wilson (1999) therefore developed a nested model of conceptual areas, which visualizes the interrelation of the here mentioned central concepts. Wilson defines models of information behavior to be "statements, often in the form of diagrams, that attempt to describe an information-seeking activity, the causes and consequences of that activity, or the relationships among stages in information-seeking behaviour" (1999: 250).

    Read more →
  • Metigo

    Metigo

    metigo is a software application that performs image-based modelling and close range photogrammetry. It produces rectified imagery plans, true ortho-projections on planar, cylindric and conic surfaces, 3D photorealistic models, measurements from photography and mappings on a photographic base for uses in the cultural heritage sector, mainly conservation. == Products == The metigo product line currently consists of the mapping software metigo MAP, the stereo-photogrammetry modeling software metigo 3D, the free viewer metigo VIEW. These products are all standalone and are not depending on other software, such as AutoCAD. === metigo MAP === metigo MAP is mainly used to map findings and conservation measured on a uniform metric photographic base. Therefore, photos of planar surfaces can be rectified based on geometrical informations, e.g. height and width of a rectangle, or cartesian coordinates measured by total station. Beside rectified imagery several other metric mapping bases can be imported and used: true ortho-projections; scaled scans of plans and plots; CAD-files; 3D models, such as digital surface models (DSM) produced by stereo-photogrammetry, SfM or 3D scanning. metigo MAP 's strong point is that rectified imagery taken with different techniques (visual light, sided light, IR, UV, UV-fluorescence, X-ray), historic images and photos taken at various stages of the conservation process can be superimposed and evaluated mutually. The user can allocate several attributes, such as different conservation measures and damage classes, to the mapped geometries. The mappings can be analysed by geometries as well as by user-defined attributes at any stage of the project. metigo MAP targets mainly conservators in different cultural heritage fields. Using it no specialist knowledge of surveying and photogrammetric techniques are needed. === metigo 3D === metigo 3D is a stereo-photogrammetric kit that allows to calculate bundle adjustments (axios3D), create high-quality 3D point clouds using multiple stereo photo pairs combined with metric survey data, mesh these point clouds, texture the meshes with high-resolution image data to create photo-realistic models, ortho-project orientated images on digital surface models (DSM) on planes and best-fit cylinders and cones, create unwrappings and developed views of curved surfaces, analyse deformations of 3D surfaces. metigo 3D targets metric survey specialists working in the cultural heritage sector. == Supported file formats == metigo has the ability to read the following formats: images: JPEG (.jpg), Tiff (.tif), Bitmaps (.bmp), CompuServ (.gif), Encapsualated Postscript (.eps), PCX (.pcx), Photo-CD (.pcd), PICT (.pcd), PNG (.png), Targa (.tga), RAW-format of several camera brands. CAD: DBX, DXF, DWG. 3D: many ASCII-formats (.stl, .wrl, etc.) point data: format editor for ASCII files. == Supported languages == Currently, an English and German version of the software is supported. For metigo MAP beside these a French and Polish GUI is offered for sale. == Applications == The main applications of metigo are: conservation in the cultural heritage context, e.g. stone conservation paintings tapestry etc. architecture, archaeology, many other are possible, e.g. forensics. == History == The first public release of metigo was in 2000.

    Read more →
  • Enterprise architecture

    Enterprise architecture

    Enterprise architecture (EA) is a business function concerned with the structures and behaviours of a business, especially business roles and processes that create and use business data. The international definition according to the Federation of Enterprise Architecture Professional Organizations is "a well-defined practice for conducting enterprise analysis, design, planning, and implementation, using a comprehensive approach at all times, for the successful development and execution of strategy. Enterprise architecture applies architecture principles and practices to guide organizations through the business, information, process, and technology changes necessary to execute their strategies. These practices utilize the various aspects of an enterprise to identify, motivate, and achieve these changes." The United States Federal Government is an example of an organization that practices EA, in this case with its Capital Planning and Investment Control processes. Companies such as Independence Blue Cross, Intel, Volkswagen AG, and InterContinental Hotels Group also use EA to improve their business architectures as well as to improve business performance and productivity. Additionally, the Federal Enterprise Architecture's reference guide aids federal agencies in the development of their architectures. == Introduction == As a discipline, EA "proactively and holistically lead[s] enterprise responses to disruptive forces by identifying and analyzing the execution of change" towards organizational goals. EA gives business and IT leaders recommendations for policy adjustments and provides best strategies to support and enable business development and change within the information systems the business depends on. EA provides a guide for decision making towards these objectives. The National Computing Centre's EA best practice guidance states that an EA typically "takes the form of a comprehensive set of cohesive models that describe the structure and functions of an enterprise. The individual models in an EA are arranged in a logical manner that provides an ever-increasing level of detail about the enterprise." Important players within EA include enterprise architects and solutions architects. Enterprise architects are at the top level of the architect hierarchy, meaning they have more responsibilities than solutions architects. While solutions architects focus on their own relevant solutions, enterprise architects focus on solutions for and the impact on the whole organization. Enterprise architects oversee many solution architects and business functions. As practitioners of EA, enterprise architects support an organization's strategic vision by acting to align people, process, and technology decisions with actionable goals and objectives that result in quantifiable improvements toward achieving that vision. The practice of EA "analyzes areas of common activity within or between organizations, where information and other resources are exchanged to guide future states from an integrated viewpoint of strategy, business, and technology." === Definitions === The term enterprise can be defined as an organizational unit, organization, or collection of organizations that share a set of common goals and collaborate to provide specific products or services to customers. In that sense, the term enterprise covers various types of organizations, regardless of their size, ownership model, operational model, or geographical distribution. It includes those organizations' complete sociotechnical system, including people, information, processes, and technologies. Enterprise as a sociotechnical system defines the scope of EA. The term architecture refers to fundamental concepts or properties of a system in its environment; and embodied in its elements, relationships, and in the principles of its design and evolution. A methodology for developing and using architecture to guide the transformation of a business from a baseline state to a target state, sometimes through several transition states, is usually known as an enterprise architecture framework. A framework provides a structured collection of processes, techniques, artifact descriptions, reference models, and guidance for the production and use of an enterprise-specific architecture description. Open-source tools supporting EA practice, such as the Essential Project, have also been evaluated for suitability in academic and commercial training contexts. Paramount to changing the EA is the identification of a sponsor. Their mission, vision, strategy, and the governance framework define all roles, responsibilities, and relationships involved in the anticipated transformation. Changes considered by enterprise architects typically include innovations in the structure or processes of an organization; innovations in the use of information systems or technologies; the integration and/or standardization of business processes; and improvement of the quality and timeliness of business information. According to the standard ISO/IEC/IEEE 42010, the product used to describe the architecture of a system is called an architectural description. In practice, an architectural description contains a variety of lists, tables, and diagrams. These are models known as views. In the case of EA, these models describe the logical business functions or capabilities, business processes, human roles and actors, the physical organization structure, data flows and data stores, business applications and platform applications, hardware, and communications infrastructure. The first use of the term "enterprise architecture" is often incorrectly attributed to John Zachman's 1987 A framework for information systems architecture. The first publication to use it was instead a National Institute of Standards (NIST) Special Publication on the challenges of information system integration. The NIST article describes EA as consisting of several levels. Business unit architecture is the top level and might be a total corporate entity or a sub-unit. It establishes for the whole organization necessary frameworks for "satisfying both internal information needs" as well as the needs of external entities, which include cooperating organizations, customers, and federal agencies. The lower levels of the EA that provide information to higher levels are more attentive to detail on behalf of their superiors. In addition to this structure, business unit architecture establishes standards, policies, and procedures that either enhance or stymie the organization's mission. The main difference between these two definitions is that Zachman's concept was the creation of individual information systems optimized for business, while NIST's described the management of all information systems within a business unit. The definitions in both publications, however, agreed that due to the "increasing size and complexity of the [i]mplementations of [i]nformation systems... logical construct[s] (or architecture) for defining and controlling the interfaces and... [i]ntegration of all the components of a system" is necessary. Zachman in particular urged for a "strategic planning methodology." == Overview == === Schools of thought === Within the field of enterprise architecture, there are three overarching schools: Enterprise IT Design, Enterprise Integrating, and Enterprise Ecosystem Adaption. Which school one subscribes to will impact how they see the EA's purpose and scope, as well as the means of achieving it, the skills needed to conduct it, and the locus of responsibility for conducting it. Under Enterprise IT Design, the main purpose of EA is to guide the process of planning and designing an enterprise's IT/IS capabilities to meet the desired organizational objectives, often by greater alignment between IT/IS and business concerns. Architecture proposals and decisions are limited to the IT/IS aspects of the enterprise and other aspects service only as inputs. The Enterprise Integrating school believes that the purpose of EA is to create a greater coherency between the various concerns of an enterprise (HR, IT, Operations, etc.), including the link between strategy formulation and execution. Architecture proposals and decisions here encompass all aspects of the enterprise. The Enterprise Ecosystem Adaption school states that the purpose of EA is to foster and maintain the learning capabilities of enterprises so they may be sustainable. Consequently, a great deal of emphasis is put on improving the capabilities of the enterprise to improve itself, to innovate, and to coevolve with its environment. Typically, proposals and decisions encompass both the enterprise and its environment. === Benefits, challenges, and criticisms === The benefits of EA are achieved through its direct and indirect contributions to organizational goals. Notable benefits include support in the areas related to design and re-design of the organizational structures during mergers, acquisitions, or

    Read more →
  • UI data binding

    UI data binding

    UI data binding is a software design pattern to simplify development of GUI applications. UI data binding binds UI elements to an application domain model. Most frameworks employ the Observer pattern as the underlying binding mechanism. To work efficiently, UI data binding has to address input validation and data type mapping. A bound control is a widget whose value is tied or bound to a field in a recordset (e.g., a column in a row of a table). Changes made to data within the control are automatically saved to the database when the control's exit event triggers. == Example == == Data binding frameworks and tools == === Delphi === DSharp third-party data binding tool OpenWire Visual Live Binding - third-party visual data binding tool === Java === JFace Data Binding JavaFX Property === .NET === Windows Forms data binding overview WPF data binding overview Avalonia Unity 3D data binding framework (available in modifications for NGUI, iGUI and EZGUI libraries) === JavaScript === Angular AngularJS Backbone.js Ember.js Datum.js knockout.js Meteor, via its Blaze live update engine OpenUI5 React Vue.js

    Read more →
  • BuildingSMART Data Dictionary

    BuildingSMART Data Dictionary

    buildingSMART Data Dictionary (bSDD) is a service provided by buildingSMART which offers free data dictionaries for the international standardization of construction planning. The structure of bSDD was defined by the Nonprofit organization Buildingsmart and is used to describe objects and their attributes in a BIM process. == Aim == The aim of bSDD is to enable architects and planners to exchange and share building data across different specialists and language boundaries and thus avoid misunderstandings caused by different interpretations of terms. The bSDD standard extends the more general IFC. Software developers can access and use the dictionaries. In May 2025 over 300 dictionaries are available, including IFC, extensions to it such as Airport Domain IFC extension module or classification systems like Uniclass. == Structure == The main structural parts of bSDD are: Dictionary: A dictionary is a collection of classes: Class: A class describes the various object types, such as Bag drop or Baggage conveyor in airport planning. A class contains properties: Property: A property describes a part of a class, e.g. color or weight. Related properties are organized in a group: GroupOfProperties: A group organizes related properties, e.g. environmental properties or electrical properties. == Creating and managing a directory == Every dictionary in bSDD must be published in the name of a registered organization. As soon as the content is activated, it receives an unchangeable URI. This means that the content remains permanently in bSDD and cannot be deleted - this ensures stable use of the dictionary. It is only possible to change the status to inactive if it is no longer to be used - however, the dictionary remains permanently.

    Read more →
  • Period-tracking app

    Period-tracking app

    Period-tracking apps are mobile applications used to track the menstrual cycle. They may be used to predict menstruation, to plan fertility, and to track health. Examples include Clue, Glow, and Flo. == Function == Users enter their dates of menstruation, and frequently other experiences such as vaginal discharge and spotting; premenstrual syndrome; changes in mood; menstrual cramps and other pain; and other symptoms such as appetite changes, bloating, and acne. The apps predict the date of users' next period, and often also their ovulation and fertile window. Some apps have additional features such as contraceptive reminders, educational content, tracking modes for use during pregnancy, or the ability to share one's menstrual cycle data with a partner. == Privacy == Period-tracking apps collect personal health data, potentially raising concerns about privacy. Researchers have warned that data may be transferred to third parties and used for consumer profiling and targeted advertising, used for employment and health insurance discrimination, or used to prosecute users for seeking abortions. After the 2022 decision by the United States Supreme Court to overturn Roe v. Wade, and the bans and restrictions on abortion in many US states that followed, many American women uninstalled the apps amidst fear that the data could be accessed by law enforcement and used to prosecute users. WIRED published a ranking of several period-tracking apps by data privacy.

    Read more →
  • Snap rounding

    Snap rounding

    Snap rounding is a method of approximating line segment locations by creating a grid and placing each point in the centre of a cell (pixel) of the grid. The method preserves certain topological properties of the arrangement of line segments. Drawbacks include the potential interpolation of additional vertices in line segments (lines become polylines), the arbitrary closeness of a point to a non-incident edge, and arbitrary numbers of intersections between input line-segments. The 3 dimensional case is worse, with a polyhedral subdivision of complexity n becoming complexity O(n4). There are more refined algorithms to cope with some of these issues, for example iterated snap rounding guarantees a "large" separation between points and non-incident edges. == Algorithm == ... (please edit). See, and https://www.cgal.org/ () == Properties == Canonicity: Efficiency; A number of efficient implementations exist. Conversely there are undesirable properties: Non-idempotence: Repeated applications can cause arbitrary drift of points. Exception on "Stable snap rounding" algorithms, see https://doi.org/10.1016/j.comgeo.2012.02.011

    Read more →
  • Gutmann method

    Gutmann method

    The Gutmann method is an algorithm for securely erasing the contents of computer hard disk drives, such as files. Devised by Peter Gutmann and Colin Plumb and presented in the paper Secure Deletion of Data from Magnetic and Solid-State Memory in July 1996, it involved writing a series of 35 patterns over the region to be erased. The selection of patterns assumes that the user does not know the encoding mechanism used by the drive, so it includes patterns designed specifically for three types of drives. A user who knows which type of encoding the drive uses can choose only those patterns intended for their drive. A drive with a different encoding mechanism would need different patterns. Most of the patterns in the Gutmann method were designed for older MFM/RLL-encoded disks. Gutmann himself has noted that more modern drives no longer use these older encoding techniques, making parts of the method irrelevant. He said "In the time since this paper was published, some people have treated the 35-pass overwrite technique described in it more as a kind of voodoo incantation to banish evil spirits than the result of a technical analysis of drive encoding techniques". Since about 2001, some ATA IDE and SATA hard drive manufacturer designs include support for the ATA Secure Erase standard, obviating the need to apply the Gutmann method when erasing an entire drive. The Gutmann method does not apply to USB sticks: a 2011 study reports that 71.7% of data remained available. On solid state drives it resulted in 0.8–4.3% recovery. == Background == The delete function in most operating systems simply marks the space occupied by the file as reusable (removes the pointer to the file) without immediately removing any of its contents. At this point the file can be fairly easily recovered by numerous recovery applications. However, once the space is overwritten with other data, there is no known way to use software to recover it. It cannot be done with software alone since the storage device only returns its current contents via its normal interface. Gutmann claims that intelligence agencies have sophisticated tools, including magnetic force microscopes, which together with image analysis, can detect the previous values of bits on the affected area of the media (for example hard disk). This claim however seems to be invalid based on the thesis "Data Reconstruction from a Hard Disk Drive using Magnetic Force Microscopy". == Method == An overwrite session consists of a lead-in of four random write patterns, followed by patterns 5 to 31 (see rows of table below), executed in a random order, and a lead-out of four more random patterns. Each of patterns 5 to 31 was designed with a specific magnetic media encoding scheme in mind, which each pattern targets. The drive is written to for all the passes even though the table below only shows the bit patterns for the passes that are specifically targeted at each encoding scheme. The result should obscure any data on the drive so that only the most advanced physical scanning (e.g., using a magnetic force microscope) of the drive is likely to be able to recover any data. The series of patterns is as follows: Encoded bits shown in bold are what should be present in the ideal pattern, although due to the encoding the complementary bit is actually present at the start of the track. == Criticism == Daniel Feenberg of the National Bureau of Economic Research, an American private nonprofit research organization, criticized Gutmann's claim that intelligence agencies are likely to be able to read overwritten data, citing a lack of evidence for such claims. He finds that Gutmann cites one non-existent source and sources that do not actually demonstrate recovery, only partially-successful observations. The definition of "random" is also quite different from the usual one used: Gutmann expects the use of pseudorandom data with sequences known to the recovering side, not an unpredictable one such as a cryptographically secure pseudorandom number generator. Nevertheless, some published government security procedures consider an overwritten disk to still be sensitive. Human factors and potential limitations in the overwriting software create a residual risk that is not considered acceptable at the highest security levels. Gutmann himself has responded to some of these criticisms and also criticized how his algorithm has been abused in an epilogue to his original paper, in which he states: In the time since this paper was published, some people have treated the 35-pass overwrite technique described in it more as a kind of voodoo incantation to banish evil spirits than the result of a technical analysis of drive encoding techniques. As a result, they advocate applying the voodoo to PRML and EPRML drives even though it will have no more effect than a simple scrubbing with random data. In fact performing the full 35-pass overwrite is pointless for any drive since it targets a blend of scenarios involving all types of (normally-used) encoding technology, which covers everything back to 30+-year-old MFM methods (if you don't understand that statement, re-read the paper). If you're using a drive which uses encoding technology X, you only need to perform the passes specific to X, and you never need to perform all 35 passes. For any modern PRML/EPRML drive, a few passes of random scrubbing is the best you can do. As the paper says, "A good scrubbing with random data will do about as well as can be expected". This was true in 1996, and is still true now. Gutmann's statement has been criticized for not recognizing that PRML/EPRML does not replace RLL, with critics claiming PRML/EPRML to be a signal detection method rather than a data encoding method. Polish data recovery service Kaleron has also claimed that Gutmann's publication contains further factual errors and assumptions that do not apply to actual disks.

    Read more →
  • Open Compute Project

    Open Compute Project

    The Open Compute Project (OCP) is an organization that facilitates the sharing of data center product designs and industry best practices among companies. Founded in 2011, OCP has significantly influenced the design and operation of large-scale computing facilities worldwide. As of February 2025, over 400 companies across the world are members of OCP, including Arm, Meta, IBM, Wiwynn, Intel, Nokia, Google, Microsoft, Seagate Technology, Dell, Rackspace, Hewlett Packard Enterprise, NVIDIA, Cisco, Goldman Sachs, Fidelity, Lenovo, Accton Technology Corporation and Alibaba Group. == Structure == The Open Compute Project Foundation is a 501(c)(6) non-profit incorporated in the state of Delaware, United States. OCP has multiple committees, including the board of directors, advisory board and steering committee to govern its operations. As of July 2020, there are seven members who serve on the board of directors which is made up of one individual member and six organizational members. Mark Roenigk (Facebook) is the Foundation's president and chairman. Andy Bechtolsheim is the individual member. In addition to Mark Roenigk who represents Facebook, other organizations on the Open Compute board of directors include Intel (Rebecca Weekly), Microsoft (Kushagra Vaid), Google (Partha Ranganathan), and Rackspace (Jim Hawkins). A list of members can be found on the OCP website. == History == The Open Compute Project began at Facebook (now Meta) in 2009 as an internal project called "Project Freedom". The hardware designs and engineering teams were led by Amir Michael (Manager, Hardware Design) and sponsored by Jonathan Heiliger (VP, Technical Operations) and Frank Frankovsky (Director, Hardware Design and Infrastructure). The three would later open source the designs of Project Freedom and co-found the Open Compute Project. The project was announced at a press event at Facebook's headquarters in Palo Alto on April 7, 2011. == OCP projects == The Open Compute Project Foundation maintains a number of OCP projects, such as: === Server designs === In 2013, two years after the Open Compute Project had started, it was noted that the goal of a more modular server design was "still a long way from live data centers". However, by then some aspects published had been used in Facebook's Prineville data center to improve energy efficiency, as measured by the power usage effectiveness index defined by The Green Grid. Efforts to advance server compute node designs included one for Intel processors and one for AMD processors. Also in 2013, Calxeda contributed a design with ARM architecture processors. Since then, several generations of OCP server designs have been deployed: Wildcat (Intel), Spitfire (AMD), Windmill (Intel E5-2600), Watermark (AMD), Winterfell (Intel E5-2600 v2) and Leopard (Intel E5-2600 v3). === OCP Accelerator Module === OCP Accelerator Module (OAM) is a design specification for hardware architectures that implement artificial intelligence systems that require high module-to-module bandwidth. OAM is used in some of AMD's Instinct accelerator modules. === Rack and power designs === Designs for a mechanical mounting system to replace standard 19-inch racks have been published, with a cabinet the same outside width (600 mm) and depth as existing racks, but with an interior space allowing for wider equipment chassis with a 537 mm width (21 inches). This allows more equipment to fit in the same volume and improves air flow. Compute chassis sizes are defined in multiples of an OpenU or OU, which is 48 mm, slightly taller than the 44 mm rack unit defined for 19-inch racks. As of March 2026, the most current base mechanical definition is the Open Rack V3.1 Specification. At the time the base specification was released, Meta also defined in greater depth the specifications for the rectifiers and power shelf. Specifications for the power monitoring interface (PMI), a communications interface enabling upstream communications between the rectifiers and battery backup unit(BBU) were published by Meta that same year, with Delta Electronics as the main technical contributor to the BBU spec. However, since 2022 the AI boom in the data center has created higher power requirements in order to satisfy the demands of AI accelerators that have been released. As of September 2024, Meta is in the process of updating its Open Rack v3 rectifier, power shelf, battery backup and power management interface specifications to accommodate this increased energy demand. In May 2024, at an Open Compute regional summit, Meta and Rittal outlined their plans for development of their High Power Rack (HPR) ecosystem in conjunction with rack, power and cable partners, increasing power capacity in the rack to 92 kilowatts or more. At the same meeting, Delta Electronics and Advanced Energy reported on their progress in developing new Open Compute standard specifications for power shelf and rectifier designs for HPR applications. Rittal also outlined their collaboration with Meta in designing airflow containment, busbar designs and grounding schemes for the new HPR requirements. === Data storage === Open Vault storage building blocks (also called "Knox") offer high disk densities, with 30 drives in a 2 OU Open Rack chassis designed for easy disk drive replacement. The 3.5 inch disks are stored in two drawers, five across and three deep in each drawer, with connections via serial attached SCSI. There is a "cold storage" variant where idle disks power down to reduce energy consumption. Another design concept was contributed by Hyve Solutions, a division of Synnex, in 2012. At the OCP Summit 2016 Facebook, together with Taiwanese ODM Wistron's spin-off Wiwynn, introduced "Lightning", a flexible NVMe JBOF (just a bunch of flash), based on the existing Open Vault (Knox) design. === Energy efficient data centers === The OCP has published data center designs for energy efficiency. These include power distribution at three-phase 277/480 VAC, which eliminates one transformer stage in typical North American data centers, a single voltage (12.5 VDC) power supply designed to work with 277/480 VAC input, and 48 VDC battery backup. For European (and other 230V countries) datacenters, there is a specification for 230/400 VAC power distribution and its conversion to 12.5 VDC. === Open networking switches === On May 8, 2013, an effort to define an open network switch was announced. The plan was to allow Facebook to load its own operating system software onto its top-of-rack switches. Press reports predicted that more expensive and higher-performance switches would continue to be popular, while less expensive products treated more like a commodity. The first attempt at an open networking switch by Facebook was designed together with Taiwanese ODM Accton using Broadcom Trident II chip and is called "Wedge"; the Linux OS that it runs is called "FBOSS". Later switch contributions include "6-pack" and Wedge-100, based on Broadcom Tomahawk chips. Similar switch hardware designs have been contributed by: Accton Technology Corporation (and its Edgecore Networks subsidiary), Mellanox Technologies, Interface Masters Technologies, Agema Systems. Capable of running Open Network Install Environment (ONIE)-compatible network operating systems such as Cumulus Linux, Switch Light OS by Big Switch Networks, or PICOS by Pica8. A similar project for a custom switch for the Google platform had been rumored, and evolved to use the OpenFlow protocol. === Servers === A sub-project for Mezzanine (NIC) OCP NIC 3.0 specification 1v00 was released in late 2019 establishing three form factors: SFF, TSFF, and LFF. == Litigation == In March, 2015, BladeRoom Group Limited and Bripco (UK) Limited sued Facebook, Emerson Electric Co. and others alleging that Facebook has disclosed BladeRoom and Bripco's trade secrets for prefabricated data centers in the Open Compute Project. Facebook petitioned for the lawsuit to be dismissed, but this was rejected in 2017. A confidential mid-trial settlement was agreed in April 2018.

    Read more →
  • Film recorder

    Film recorder

    A film recorder is a graphical output device for transferring images to photographic film from a digital source. In a typical film recorder, an image is passed from a host computer to a mechanism to expose film through a variety of methods, historically by direct photography of a high-resolution cathode-ray tube (CRT) display. The exposed film can then be developed using conventional developing techniques, and displayed with a slide or motion picture projector. The use of film recorders predates the current use of digital projectors, which eliminate the time and cost involved in the intermediate step of transferring computer images to film stock, instead directly displaying the image signal from a computer. Motion picture film scanners are the opposite of film recorders, copying content from film stock to a computer system. Film recorders can be thought of as modern versions of kinescopes. == Design == === Operation === All film recorders typically work in the same manner. The image is fed from a host computer as a raster stream over a digital interface. A film recorder exposes film through various mechanisms; flying spot (early recorders); photographing a high resolution video monitor; electron beam recorder (Sony HDVS); a CRT scanning dot (Celco); focused beam of light from a light valve technology (LVT) recorder; a scanning laser beam (Arrilaser); or recently, full-frame LCD array chips. For color image recording on a CRT film recorder, the red, green, and blue channels are sequentially displayed on a single gray scale CRT, and exposed to the same piece of film as a multiple exposure through a filter of the appropriate color. This approach yields better resolution and color quality than possible with a tri-phosphor color CRT. The three filters are usually mounted on a motor-driven wheel. The filter wheel, as well as the camera's shutter, aperture, and film motion mechanism are usually controlled by the recorder's electronics and/or the driving software. CRT film recorders are further divided into analog and digital types. The analog film recorder uses the native video signal from the computer, while the digital type uses a separate display board in the computer to produce a digital signal for a display in the recorder. Digital CRT recorders provide a higher resolution at a higher cost compared to analog recorders due to the additional specialized hardware. Typical resolutions for digital recorders were quoted as 2K and 4K, referring to 2048×1366 and 4096×2732 pixels, respectively, while analog recorders provided a resolution of 640×428 pixels in comparison. Higher-quality LVT film recorders use a focused beam of light to write the image directly onto a film loaded spinning drum, one pixel at a time. In one example, the light valve was a liquid-crystal shutter, the light beam was steered with a lens, and text was printed using a pre-cut optical mask. The LVT will record pixel beyond grain. Some machines can burn 120-res or 120 lines per millimeter. The LVT is basically a reverse drum scanner. The exposed film is developed and printed by regular photographic chemical processing. === Formats === Film recorders are available for a variety of film types and formats. The 35 mm negative film and transparencies are popular because they can be processed by any photo shop. Single-image 4×5 film and 8×10 are often used for high-quality, large format printing. Some models have detachable film holders to handle multiple formats with the same camera or with Polaroid backs to provide on-site review of output before exposing film. == Uses == Film recorders are used in digital printing to generate master negatives for offset and other bulk printing processes. For preview, archiving, and small-volume reproduction, film recorders have been rendered obsolete by modern printers that produce photographic-quality hardcopies directly on plain paper. They are also used to produce the master copies of movies that use computer animation or other special effects based on digital image processing. However, most cinemas nowadays use Digital Cinema Packages on hard drives instead of film stock. === Computer graphics === Film recorders were among the earliest computer graphics output devices; for example, the IBM 740 CRT Recorder was announced in 1954. Film recorders were also commonly used to produce slides for slide projectors; but this need is now largely met by video projectors that project images directly from a computer to a screen. The terms "slide" and "slide deck" are still commonly used in presentation programs. === Current uses === Currently, film recorders are primarily used in the motion picture film-out process for the ever increasing amount of digital intermediate work being done. Although significant advances in large venue video projection alleviates the need to output to film, there remains a deadlock between the motion picture studios and theater owners over who should pay for the cost of these very costly projection systems. This, combined with the increase in international and independent film production, will keep the demand for film recording steady for at least a decade. == Key manufacturers == Traditional film recorder manufacturers have all but vanished from the scene or have evolved their product lines to cater to the motion picture industry. Dicomed was one such early provider of digital color film recorders. Polaroid, Management Graphics, Inc, MacDonald-Detwiler, Information International, Inc., and Agfa were other producers of film recorders. Arri is the only current major manufacturer of film recorders. Kodak Lightning I film recorder. One of the first laser recorders. Needed an engineering staff to set up. Kodak Lightning II film recorder used both gas and diode laser to record on to film. The last LVT machines produced by Kodak / Durst-Dice stopped production in 2002. There are no LVT film recorders currently being produced. LVT Saturn 1010 uses a LED exposure (RGB) to 8"x10" film at 1000-3000ppi. LUX Laser Cinema Recorder from Autologic/Information International in Thousand Oaks, California. Sales end in March 2000. Used on the 1997 film “Titanic”. Arri produces the Arrilaser line of laser-based motion picture film recorders. MGI produced the Solitaire line of CRT-based motion picture film recorders. Matrix, originally ImaPRO, a branch of Agfa Division, produced the QCR line of CRT-based motion picture film recorders. CCG, formerly Agfa film recorders, has been a steady manufacturer of film recorders based in Germany. In 2004 CCG introduced Definity, a motion picture film recorder utilizing LCD technology. In 2010 CCG introduced the first full LED LCD film recorder as a new step in film recording. Cinevator was made by Cinevation AS, in Drammen, Norway. The Cinevator was a real-time digital film recorder. It could record IN, IP and prints with and without sound Oxberry produced the Model 3100 film recorder camera system, with interchangeable pin-registered movements (shuttles) for 35 mm (full frame/Silent, 1.33:1) and 16 mm (regular 16, "2R"), and others have adapted the Oxberry movements for CinemaScope, 1.85:1, 1.75:1, 1.66:1, as well as Academy/Sound (1.37:1) in 35 mm and Super-16 in 16 mm ("1R"). For instance, the "Solitaire" and numerous others employed the Oxberry 3100 camera system. == History == Before video tape recorders or VTRs were invented, TV shows were either broadcast live or recorded to film for later showing, using the kinescope process. In 1967, CBS Laboratories introduced the Electronic Video Recording format, which used video and telecined-to-video film sources, which were then recorded with an electron-beam recorder at CBS' EVR mastering plant at the time to 35mm film stock in a rank of 4 strips on the film, which was then slit down to 4 8.75 mm (0.344 in) film copies, for playback in an EVR player. All types of CRT recorders were (and still are) used for film recording. Some early examples used for computer-output recording were the 1954 IBM 740 CRT Recorder, and the 1962 Stromberg-Carlson SC-4020, the latter using a Charactron CRT for text and vector graphic output to either 16 mm motion picture film, 16 mm microfilm, or hard-copy paper output. Later 1970 and 80s-era recording to B&W (and color, with 3 separate exposures for red, green, and blue)) 16 mm film was done with an EBR (Electron Beam Recorder), the most prominent examples made by 3M), for both video and COM (Computer Output Microfilm) applications. Image Transform in Universal City, California used specially modified 3M EBR film recorders that could perform color film-out recording on 16 mm by exposing three 16 mm frames in a row (one red, one green and one blue). The film was then printed to color 16 mm or 35 mm film. The video fed to the recorder could either be NTSC, PAL or SECAM. Later, Image Transform used specially modified VTRs to record 24 frame for their "Image Vision" system. The modified 1 inch type B videotape VTRs would record

    Read more →
  • Online public access catalog

    Online public access catalog

    The online public access catalog (OPAC), now frequently synonymous with library catalog, is an online database of materials held by a library or group of libraries. Online catalogs have largely replaced the analog card catalogs previously used in libraries. == History == === Early online === Although a handful of experimental systems existed as early as the 1960s, the first large-scale online catalogs were developed at Ohio State University in 1975 and the Dallas Public Library in 1978. These and other early online catalog systems tended to closely reflect the card catalogs that they were intended to replace. Using a dedicated terminal or telnet client, users could search a handful of pre-coordinate indexes and browse the resulting display in much the same way they had previously navigated the card catalog. Throughout the 1980s, the number and sophistication of online catalogs grew. The first commercial systems appeared, and would by the end of the decade largely replace systems built by libraries themselves. Library catalogs began providing improved search mechanisms, including Boolean and keyword searching, as well as ancillary functions, such as the ability to place holds on items that had been checked-out. At the same time, libraries began to develop applications to automate the purchase, cataloging, and circulation of books and other library materials. These applications, collectively known as an integrated library system (ILS) or library management system, included an online catalog as the public interface to the system's inventory. Most library catalogs are closely tied to their underlying ILS system. === Stagnation and dissatisfaction === The 1990s saw a relative stagnation in the development of online catalogs. Although the earlier character-based interfaces were replaced with ones for the Web, both the design and the underlying search technology of most systems did not advance much beyond that developed in the late 1980s. At the same time, organizations outside of libraries began developing more sophisticated information retrieval systems. Web search engines like Google and popular e-commerce websites such as Amazon.com provided simpler to use (yet more powerful) systems that could provide relevancy ranked search results using probabilistic and vector-based queries. Prior to the widespread use of the Internet, the online catalog was often the first information retrieval system library users ever encountered. Now accustomed to web search engines, newer generations of library users have grown increasingly dissatisfied with the complex (and often arcane) search mechanisms of older online catalog systems. This has, in turn, led to vocal criticisms of these systems within the library community itself, and in recent years to the development of newer (often termed 'next-generation') catalogs. === Next-generation catalogs === Newer generations of library catalog systems, typically called discovery systems (or a discovery layer), are distinguished from earlier OPACs by their use of more sophisticated search technologies, including relevancy ranking and faceted search, as well as features aimed at greater user interaction and participation with the system, including tagging and reviews. These new features rely heavily on existing metadata which may be poor or inconsistent, particularly for older records. Newer catalog platforms may be independent of the organization's integrated library system (ILS), instead providing drivers that allow for the synchronization of data between the two systems. While the original online catalog interfaces were almost exclusively built by ILS vendors, libraries have increasingly sought next-generation catalogs built by enterprise search companies and open-source software projects, often led by libraries themselves. == Union catalogs == Although library catalogs typically reflect the holdings of a single library, they can also contain the holdings of a group or consortium of libraries. These systems, known as union catalogs, are usually designed to aid the borrowing of books and other materials among the member institutions via interlibrary loan. Examples of this type of catalogs include COPAC, SUNCAT, NLA Trove, and WorldCat—the last catalogs the collections of libraries worldwide. == Related systems == There are a number of systems that share much in common with library catalogs, but have traditionally been distinguished from them. Libraries utilize these systems to search for items not traditionally covered by a library catalog, although these systems are sometimes integrated into a more comprehensive discovery system. Bibliographic databases—such as Medline, ERIC, PsycINFO, Scopus, Web of Science, and many others—index journal articles and other research data. There are also a number of applications aimed at managing documents, photographs, and other digitized or born-digital items such as Digital Commons and DSpace. Particularly in academic libraries, these systems (often known as digital library systems or institutional repository systems) assist with efforts to preserve documents created by faculty and students. Electronic resource management helps librarians to track selection, acquisition, and licensing of a library's electronic information resources.

    Read more →
  • Artificial intelligence industry in China

    Artificial intelligence industry in China

    The roots of the development of artificial intelligence in the People's Republic of China started in the late 1970s following Deng Xiaoping's reform and opening up emphasizing science and technology as the country's primary productive force. The initial stages of China's AI development were slow and encountered significant challenges due to lack of resources and talent. At the beginning China was behind most Western countries in terms of AI development. A majority of the research was led by scientists who had received higher education abroad. Since 2006, the Chinese government has steadily developed a national agenda for artificial intelligence development and emerged as one of the leading nations in artificial intelligence research and development. In 2016, the Chinese Communist Party (CCP) released its 13th Five-Year Plan in which it aimed to become a global AI leader by 2030. As of 2025, China is considered to be a world leader in AI technology along with the United States. The State Council has a list of "national AI teams" including fifteen China-based companies, including Baidu, Tencent, Alibaba, SenseTime, and iFlytek. Each company should lead the development of a designated specialized AI sector in China, such as facial recognition, software/hardware, and speech recognition. China's rapid AI development has significantly impacted Chinese society in many areas, including the socio-economic, military, intelligence, and political spheres. Agriculture, transportation, accommodation and food services, and manufacturing are the top industries that would be the most impacted by further AI deployment. The private sector, university laboratories, and the military are working collaboratively in many aspects as there are few current existing boundaries. In 2021, China published the Data Security Law of the People's Republic of China, its first national law addressing AI-related ethical concerns. In October 2022, the United States federal government announced a series of export controls and trade restrictions intended to restrict China's access to advanced computer chips for AI applications. In 2023, the Cyberspace Administration of China issued guidelines requiring that AI content upholds the ideology of the CCP including Core Socialist Values, avoids discrimination, respects intellectual property rights, and safeguards user data. In 2025, the Chinese government issued a document regarding training data, requiring companies to use as little as data deemed "unsafe" as possible, as well as requiring companies to test models regularly. Concerns have been raised about the effects of the Chinese government's censorship regime on the development of generative artificial intelligence and long-term talent acquisition with state of the country's demographics. Others have noted that official notions of AI safety require following the priorities of the CCP and are antithetical to standards in democratic societies and raised concerns about the extension of China's system of mass surveillance and censorship abroad. == History == The Chinese term for artificial intelligence (réngōngzhìnéng 人工智能) connotes "humanmade" intelligence. The term developed as mid-20th century localisation of the Japanese term jinko chino. The research and development of artificial intelligence in China started in the 1980s, with the announcement by Deng Xiaoping of the importance of science and technology for China's economic growth. === Late 1970s to early 2010s === Chinese artificial intelligence research and development began in late 1970s after Deng Xiaoping's reform and opening up. China's first national conference on AI occurred in 1979. Academic journals in the late 1970s began publishing literature reviews of Western research on AI topics. In the 1980s, a group of Chinese scientists launched AI research led by Qian Xuesen and Wu Wenjun. However, during the time, China's society still had a generally conservative view towards AI. In the early 1980s, Science Press published translated versions of Western textbooks such as Patrick Winston's Artificial Intelligence and Nils John Nilsson's Principles of Artificial Intelligence. In 1980, a journal of the Chinese Academy of Sciences convened its first annual National Symposium on Artificial Intelligence, which included national and international scholars like Herbert A. Simon. The Chinese Association for Artificial Intelligence (CAAI) was founded in September 1981 and was authorized by the Ministry of Civil Affairs. CAAI has continued to be the largest AI association in China as of 2025. In 1982, CAAI began publishing the Artificial Intelligence Journal, which published early AI research by Chinese academics. In the 1980s, Chinese research on AI was influenced by the field of cybernetics, particularly the work of Norbert Weiner and his text Cybernetics: Or Control and Communication in the Animal and the Machine. Chinese researchers at the time sought to situate AI as part of a broader "Intelligence Science" field which would include disciplines like mathematics, computer science, cognitive science, social sciences, and philosophy. In 1987, Tsinghua University began a research publication on AI. Beginning in 1993, smart automation and intelligence have been part of China's national technology plan. Since the 2000s, the Chinese government has further expanded its research and development funds for AI and the number of government-sponsored research projects has dramatically increased. In 2006, China announced a policy priority for the development of artificial intelligence, which was included in the National Medium and Long Term Plan for the Development of Science and Technology (2006–2020), released by the State Council. In the same year, artificial intelligence was also mentioned in the 11th Five-Year Plan. In 2011, the Association for the Advancement of Artificial Intelligence (AAAI) established a branch in Beijing, China. At same year, the Wu Wenjun Artificial Intelligence Science and Technology Award was founded in honor of Chinese mathematician Wu Wenjun, and it became the highest award for Chinese achievements in the field of artificial intelligence. The first award ceremony was held on May 14, 2012. In 2013, the International Joint Conferences on Artificial Intelligence (IJCAI) was held in Beijing, marking the first time the conference was held in China. This event coincided with the Chinese government's announcement of the "Chinese Intelligence Year," a significant milestone in China's development of artificial intelligence. === Late 2010s to early 2020s === AI became a major issue of commercial, public, and political focus in China in the latter half of the 2010s. Various interpretations of the primary cause for this increased focus exist, with some analyses focusing on the 2016 Go match between Google's AlphaGo and Lee Sedol, others emphasising the U.S. increasing trade restrictions on China's technology industries and the desire to achieve national technological self-sufficiency. The State Council of China issued "A Next Generation Artificial Intelligence Development Plan" (State Council Document [2017] No. 35) on 20 July 2017. In the document, the CCP Central Committee and the State Council urged governing bodies in China to promote the development of artificial intelligence. Specifically, the plan described AI as a strategic technology that has become a "focus of international competition".:2 The document urged significant investment in a number of strategic areas related to AI and called for close cooperation between the state and private sectors. It set the goal of China becoming the preeminent country for AI research and application by 2030. During the general secretaryship of Xi Jinping, artificial intelligence has been a focus of the CCP's military-civil fusion efforts. On the occasion of Xi's speech at the first plenary meeting of the Central Military-Civil Fusion Development Committee (CMCFDC), scholars from the National Defense University wrote in the PLA Daily that the "transferability of social resources" between economic and military ends is an essential component to being a great power. During the Two Sessions 2017,"artificial intelligence plus" was proposed to be elevated to a strategic level. The same year witnessed the emergence of multiple application-level usages in the medical field according to reports. In 2018, Xinhua News Agency, in partnership with Tencent's subsidiary Sogou, launched its first artificial intelligence-generated news anchor. In 2018, the State Council budgeted $2.1 billion for an AI industrial park in Mentougou district. In order to achieve this the State Council stated the need for massive talent acquisition, theoretical and practical developments, as well as public and private investments. Some of the stated motivations that the State Council gave for pursuing its AI strategy include the potential of artificial intelligence for industrial transformation, better social

    Read more →