AI Art Kingdom

AI Art Kingdom — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Environmental impact of AI

  The environmental impact of the design, training, deployment and use of artificial intelligence includes the greenhouse gas emissions from generating electricity for data centres and computing hardware, operational and upstream water use, and material impacts from hardware manufacturing, mining and electronic waste. Estimating AI's environmental effects can be difficult because results depend on how impacts are measured, including whether accounting includes only model computation or also data-centre overhead, idle capacity, hardware manufacture, and local electricity supply. As these issues have received greater attention, governments and regulators have increasingly considered data-centre reporting requirements, energy-efficiency standards, and broader transparency measures for AI-related resource use. == Carbon footprint and energy use == AI-related energy use arises at multiple stages, including model training, fine-tuning, inference, storage, networking, and supporting infrastructure such as cooling and power conversion. === Individual level === Published estimates of energy use per AI request vary widely across models, tasks and measurement methods. A benchmark study presented at the 2024 ACM Conference on Fairness, Accountability, and Transparency found substantial differences between task types, with lower energy use for some text tasks and much higher energy use for image generation in the study's test conditions. In that benchmark, simple classification tasks consumed about 0.002–0.007 Wh per prompt on average (about 9% of a smartphone charge for 1,000 prompts), while text generation and text summarisation each used about 0.05 Wh per prompt; image generation averaged 2.91 Wh per prompt, and the least efficient image model in the study used 11.49 Wh per image (roughly equivalent to half a smartphone charge). First-party measurements in production environments have also been published. A 2025 Google study on Gemini assistant serving reported median per-prompt energy, emissions, and water-use estimates under the authors' accounting framework, while noting that different system boundaries can produce substantially different results. The study reported a median text-prompt estimate of about 0.24 Wh, which is roughly as much energy as watching nine seconds of television. The study also stated that software and infrastructure improvements reduced energy use by a factor of 33 and carbon emissions by a factor of 44 for a typical prompt over one year within the authors' framework. Researchers at the University of Michigan measured the energy consumption of various Meta Llama 3.1 models released in 2024 and found that smaller language models (8 billion parameters) use about 114 joules (0.03167 Wh) per response, while larger models (405 billion parameters) require up to 6,700 joules (1.861 Wh) per response. This corresponds to the energy needed to run a microwave oven for roughly one-tenth of a second and eight seconds, respectively. Comparisons between AI systems and human labour for specific tasks have produced mixed results and remain sensitive to assumptions about output quality, workload and system boundaries. A 2024 study in Scientific Reports reported 130 to 2900 times lower estimated carbon emissions for selected AI systems than for human writers and illustrators under its assumptions. A later Scientific Reports paper reported a counterexample for programming tasks under its assumptions, finding 5 to 19 times higher estimated emissions for the evaluated AI system than for human programmers on the benchmark used in that study. === System level === ==== Energy use and efficiency ==== AI electricity intensity depends not only on model architecture but also on hardware and facility efficiency. Data-centre operators commonly report Power usage effectiveness (PUE), which measures the ratio of total facility energy to IT equipment energy; a lower PUE indicates less overhead energy for cooling and other supporting infrastructure. Operators may also publish metrics and case studies on hardware efficiency, cooling systems and power sourcing. In its 2024 environmental report, Google stated that its 2023 total greenhouse gas emissions increased 13% year over year, primarily because of increased data-centre energy consumption and supply-chain emissions, while also reporting lower PUE than industry averages for its own facilities. The International Energy Agency has also reported that data centres remain a relatively small share of global electricity use overall, but that their local effects can be much more pronounced because demand is geographically concentrated. ==== Carbon footprint ==== At system level, AI contributes to rising electricity demand in data centres and related infrastructure. The International Energy Agency estimated that data centres used about 415 TWh of electricity in 2024, or around 1.5% of global electricity consumption, and projected that data-centre electricity use could rise to about 945 TWh by 2030, with AI identified as the main driver of that growth alongside other digital services. The carbon footprint of AI systems depends strongly on electricity sources, hardware efficiency, utilisation rates, and what stages are included in the accounting. Training large models can require substantial electricity, while total lifecycle impacts also depend on deployment scale and the amount of inference performed after training. Early analyses of frontier-model development reported rapid historical growth in training compute for selected systems, although later trends have depended on changes in model design, hardware and efficiency gains. Accounting methods that include upstream or embodied impacts, such as hardware manufacture and facilities construction, can materially affect estimates of AI-related emissions. === Decisions and strategies by individual companies === Large technology companies have reported that the expansion of AI and cloud infrastructure affects their sustainability targets, electricity demand, and resource use. Google, for example, attributed part of its emissions growth in 2023 to increased data-centre energy consumption and supply-chain emissions in its 2024 environmental report. Cloud and AI companies have also announced measures intended to reduce environmental impacts, including investment in more efficient hardware, low-carbon electricity procurement, alternative cooling systems, and water stewardship programmes. The extent, comparability, and third-party verification of such disclosures vary between firms and jurisdictions. == Water usage == Data centres can use water directly for cooling and indirectly through the water used in electricity generation, depending on the local energy mix. Public reporting on data-centre water use has often been inconsistent, making comparisons between operators and regions difficult. To standardise operational reporting, The Green Grid proposed the metric water usage effectiveness (WUE), defined as annual site water use divided by IT equipment energy use. WUE does not by itself measure local water stress, source sustainability, or all upstream water impacts. Studies of AI water use also distinguish between water withdrawal and water consumption. Research on AI-specific water use has argued that the water footprint of AI systems can be difficult to observe and may vary substantially by location, cooling design, and electricity source. A 2025 Communications of the ACM article summarised methods for estimating AI water footprints and emphasised the distinction between water withdrawal and water consumption. Li and colleagues estimated that global AI water withdrawal could reach 4.2–6.6 billion cubic metres in 2027 under the scenarios examined in their article. Using GPT-3, released by OpenAI in 2020, as an example, they estimated that training the model in Microsoft's U.S. data centres could consume about 700,000 litres of onsite water and about 5.4 million litres in total when offsite electricity-related water use was included; they also estimated that 10–50 medium-length GPT-3 responses could consume about 500 mL of water, depending on when and where the model was deployed. Published prompt-level estimates have also varied by system and accounting framework: the 2025 Google study on Gemini assistant serving reported a median text-prompt estimate of about 0.26 mL under its framework. Location can materially affect the significance of data-centre water use. Research on U.S. data centres found that one-fifth of servers' direct water footprint came from moderately to highly water-stressed watersheds, while nearly half of servers were fully or partially powered by plants located in water-stressed regions. A 2025 Reuters report, citing data from Verisk Maplecroft and NatureFinance, said that an average mid-sized data centre uses about 1.4 million litres of water per day for cooling and that Phoenix would experience a 32% increase in annual water stress if currently pl

  Read more →
• 

  Comparison of user features of messaging platforms

  Comparison of user features of messaging platforms refers to a comparison of all the various user features of various electronic instant messaging platforms. This includes a wide variety of resources; it includes standalone apps, platforms within websites, computer software, and various internal functions available on specific devices, such as iMessage for iPhones. This entry includes only the features and functions that shape the user experience for such apps. A comparison of the underlying system components, programming aspects, and other internal technical information, is outside the scope of this entry. == Overview and background == Instant messaging technology is a type of online chat that offers real-time text transmission over the Internet. A LAN messenger operates in a similar way over a local area network. Short messages are typically transmitted between two parties when each user chooses to complete a thought and select "send". Some IM applications can use push technology to provide real-time text, which transmits messages character by character, as they are composed. More advanced instant messaging can add file transfer, clickable hyperlinks, Voice over IP, or video chat. Non-IM types of chat include multicast transmission, usually referred to as "chat rooms", where participants might be anonymous or might be previously known to each other (for example collaborators on a project that is using chat to facilitate communication). Instant messaging systems tend to facilitate connections between specified known users (often using a contact list also known as a "buddy list" or "friend list"). Depending on the IM protocol, the technical architecture can be peer-to-peer (direct point-to-point transmission) or client-server (an Instant message service center retransmits messages from the sender to the communication device). By 2010, instant messaging over the Web was in sharp decline, in favor of messaging features on social networks. The most popular IM platforms were terminated, such as AIM which closed down and Windows Live Messenger which merged into Skype. Instant messaging has since seen a revival in popularity in the form of "messaging apps" (usually on mobile devices) which by 2014 had more users than social networks. As of 2010, social networking providers often offer IM abilities. Facebook Chat is a form of instant messaging, and Twitter can be thought of as a Web 2.0 instant messaging system. Similar server-side chat features are part of most dating websites, such as OkCupid or PlentyofFish. The spread of smartphones and similar devices in the late 2000s also caused increased competition with conventional instant messaging, by making text messaging services still more ubiquitous. Many instant messaging services offer video calling features, voice over IP and web conferencing services. Web conferencing services can integrate both video calling and instant messaging abilities. Some instant messaging companies are also offering desktop sharing, IP radio, and IPTV to the voice and video features. The term "Instant Messenger" is a service mark of Time Warner and may not be used in software not affiliated with AOL in the United States. For this reason, in April 2007, the instant messaging client formerly named Gaim (or gaim) announced that they would be renamed "Pidgin". In the 2010s, more people started to use messaging apps on modern computers and devices like WhatsApp, WeChat, Viber, Facebook Messenger, Telegram, Signal and Line rather than instant messaging on computers like AIM and Windows Live Messenger. For example, WhatsApp was founded in 2009, and Facebook acquired in 2014, by which time it already had half a billion users. === Concepts === ==== Backchannel ==== Backchannel is the practice of using networked computers to maintain a real-time online conversation alongside the primary group activity or live spoken remarks. The term was coined in the field of linguistics to describe listeners' behaviours during verbal communication. (See Backchannel (linguistics).) The term "backchannel" generally refers to online conversation about the conference topic or speaker. Occasionally backchannel provides audience members a chance to fact-check the presentation. First growing in popularity at technology conferences, backchannel is increasingly a factor in education where WiFi connections and laptop computers allow participants to use ordinary chat like IRC or AIM to actively communicate during presentation. More recent research include works where the backchannel is brought publicly visible, such as the ClassCommons, backchan.nl and Fragmented Social Mirror. Twitter is also widely used today by audiences to create backchannels during broadcasting of content or at conferences. For example, television drama, other forms of entertainment and magazine programs. This practice is often also called live tweeting. Many conferences nowadays also have a hashtag that can be used by the participants to share notes and experiences; furthermore such hashtags can be user generated. == Features == Various platforms and apps are distinguished by their strengths and features in regards to specific functions. === Group messaging === === Official channels === Some apps include a feature known as "official channels" which allows companies, especially news media outlets, publications, and other mass media companies, to offer an official channel, which users can join, and thereby receive regular updates, published articles, or news updates from companies or news outlets. Two apps which have a large amount of such channels available are Line and Telegram. === Video group calls === == Basic default platforms == Basic platforms which are common across entire categories of mobile devices, computers, or operating systems. === SMS === SMS (short message service) is a text messaging service component of most telephone, Internet, and mobile device systems. It uses standardized communication protocols to enable mobile devices to exchange short text messages. An intermediary service can facilitate a text-to-voice conversion to be sent to landlines. SMS, as used on modern devices, originated from radio telegraphy in radio memo pagers that used standardized phone protocols. These were defined in 1985 as part of the Global System for Mobile Communications (GSM) series of standards. The first test SMS message was sent on December 3, 1992, when Neil Papwort, a test engineer for Sema Group, used a personal computer to send "Merry Christmas" to the phone of colleague Richard Jarvis. It commercially rolled out to many cellular networks that decade. SMS became hugely popular worldwide as a way of text communication. By the end of 2010, SMS was the most widely used data application, with an estimated 3.5 billion active users, or about 80% of all mobile phone subscribers. The protocols allowed users to send and receive messages of up to 160 characters (when entirely alpha-numeric) to and from GSM mobiles. Although most SMS messages are sent from one mobile phone to another, support for the service has expanded to include other mobile technologies, such as ANSI CDMA networks and Digital AMPS. Mobile marketing, a type of direct marketing, uses SMS. According to a 2018 market research report the global SMS messaging business was estimated to be worth over US$100 billion, accounting for almost 50 percent of all the revenue generated by mobile messaging. A Flash SMS is a type of SMS that appears directly on the main screen without user interaction and is not automatically stored in the inbox. It can be useful in emergencies, such as a fire alarm or cases of confidentiality, as in delivering one-time passwords. ==== Threaded SMS format ==== Threaded SMS is a visual styling orientation of SMS message history that arranges messages to and from a contact in chronological order on a single screen. It was first invented by a developer working to implement the SMS client for the BlackBerry, who was looking to make use of the blank screen left below the message on a device with a larger screen capable of displaying far more than the usual 160 characters, and was inspired by threaded Reply conversations in email. Visually, this style of representation provides a back-and-forth chat-like history for each individual contact. Hierarchical-threading at the conversation-level (as typical in blogs and on-line messaging boards) is not widely supported by SMS messaging clients. This limitation is due to the fact that there is no session identifier or subject-line passed back and forth between sent and received messages in the header data (as specified by SMS protocol) from which the client device can properly thread an incoming message to a specific dialogue, or even to a specific message within a dialogue. Most smart phone text-messaging-clients are able to create some contextual threading of "group messages" which narrows the context of the thread around the common interests shared by

  Read more →
• 

  Wispr

  Wispr AI is a software company founded in 2021 by Tanay Kothari and Sahaj Garg that develops voice-based interfaces for computers and other devices. The company’s main product, Wispr Flow, is an AI-powered speech-to-text application available on macOS, Windows and iOS. == History == Wispr was founded in 2021 with the goal of building a non-invasive wearable device that would allow users to control smartphones without touch input. The device was intended to translate neurological signals into actions and to enable silent text entry by mouthing words, drawing on techniques similar to brain–computer interfaces. Early funding was directed toward this hardware-focused effort. After around three years of development, Wispr concluded that contemporary AI systems were not sufficient for the requirements of the wearable device. The company shifted its focus to Flow voice dictation software, the software layer originally built for the wearable, and in 2024 released a macOS application based on this platform. == Wispr Flow == Wispr Flow (often referred to as Flow) is a speech-to-text application for macOS, Windows and iOS. It provides real-time dictation and transcription in more than 100 languages and can operate across applications, including email clients, messaging platforms and chatbots. In June 2025 Wispr released an iOS version that functions as a third-party keyboard, allowing voice input in any app. == Technology == Wispr Flow is based on automatic speech recognition (ASR) and other AI models. The system adapts to individual users over time, learning their vocabulary and preferred style with the aim of reducing manual editing. Flow operates through configurable “Flow Sessions”, defined as time windows during which the app has access to the microphone; users can set session timeouts or disable automatic time limits. == Users and Adoption == Wispr initially targeted users such as venture capitalists, entrepreneurs and executives who process large volumes of text and often work in private or flexible environments. The user base later expanded via platforms such as Product Hunt to students, software developers, writers, lawyers and consultants. Flow has also been adopted by users with conditions such as ADHD, dyslexia, paralysis and carpal tunnel syndrome. About 40% of users are in the United States, 30% in Europe and the remaining 30% in other regions. More than 30% of users come from non-technical backgrounds. Flow supports 104 languages, with approximately 40% of dictations in English and 60% in other languages, including Spanish, French, German, Dutch, Hindi and Mandarin. Wispr has reported monthly user growth above 50%, a six-month active-user retention rate of about 80%, a payment rate around 19%, and revenue of approximately US$3.8 million between July 2024 and July 2025. == Development == Wispr has announced plans for an Android application and maintains waiting lists for Android, Linux and web versions of Flow. The company is developing shared-context features for teams so that the software can recognize common terminology within organizations and has stated that it aims to evolve Flow into a broader AI assistant for tasks such as messaging, note-taking and reminders. Wispr has also reported working with unnamed AI hardware partners on interaction layers for future devices. == Funding == In 2025 Wispr raised US$30 million in a Series A funding round led by Menlo Ventures, with participation from NEA, 8VC and several individual investors, including Evan Sharp and Henry Ward. Earlier investors include Neo, MVP Ventures and AIX Ventures. In November of that same year, the company raised a US$25 million Series A extension led by Notable Capital, with participation from Flight Fund, bringing its total funding to US$81 million. Wispr competes with other AI-based dictation and voice-input tools, including Aqua, Talktastic, Superwhisper and Betterdication.

  Read more →
• 

  Clips (software)

  Clips is a discontinued mobile video editing software application created by Apple Inc. It was released onto the iOS App Store on April 6, 2017, for free. Initially, it was only available on 64-bit devices running iOS 10.3 or later; as of version 3.1.3, it requires iOS 16.0 or later. Apple describes it as an app for "making and sharing fun videos with text, effects, graphics, and more.". Its final release was on May 9, 2024 before was removed from the App Store on October 10, 2025. == Features == After launching of the app, the user sees the view of the front-facing camera. The app allows the user to create a new clip by tapping on a red record button, or use photos or videos from the device's photo library. Once a clip is recorded, it can be added to a project timeline shown at the bottom of the screen. The user can share their project on social media platforms. The user can also add filters and effects to the project. "Live Titles" (available in several styles) can also be created by dictating to the device.

  Read more →
• 

  Wunderlist

  Wunderlist is a discontinued cloud-based task management application. It allowed users to create lists to manage their tasks from a smartphone, tablet, computer and smartwatch. Wunderlist was free; additional collaboration features were available in a paid version known as Wunderlist Pro, released April 2013. Wunderlist was created in 2011 by Berlin-based startup 6Wunderkinder (Engl.: 6Prodigies). The company was acquired by Microsoft in June 2015, at which time the app had over 13 million users. In April 2017, Microsoft announced that Wunderlist would eventually be discontinued in favor of Microsoft To Do, a new multi-platform app developed by the Wunderlist team that has direct integration with the company's Office 365 service. On December 6, 2019, Microsoft announced that it would shut down Wunderlist on May 6, 2020. After this date, the application would no longer sync but users could still import their content into Microsoft To Do. == History == In 2009, Wunderlist's CEO Christian Reber called on the social network platform XING for business partners to create a new to-do app. Frank Thelen responded and together Reber and Thelen developed first concepts for Wunderlist. The necessary seed funding was granted by High-Tech Gründerfonds and e42 GmbH. The first version of Wunderlist was launched on November 9, 2010. Initially, the program was created for desktop PCs and platforms such as Windows, Linux and Mac OS X. In December 2011, the app received approval for the iPhone. Subsequently, the developers released a version prepared for the iPad with the name Wunderlist HD. In September 2012, the developers announced a shutdown of their service Wunderkit. Instead they wanted to focus on creating a new version of Wunderlist, which was later on released in December 2012 under the name Wunderlist 2. In September 2013, the company announced it had over 5 million users. In July 2014, a new major update was released under the name of Wunderlist 3, with a new real-time sync architecture. Wunderlist reached 10 million users in December 2014. On June 1, 2015, it was announced that Microsoft had acquired 6Wunderkinder, makers of Wunderlist, for between US$100 million and US$200 million (~$258 million in 2024). Following its acquisition of the app, Microsoft announced in April 2017 a preview of To-Do, a multi-platform task management app developed by the Wunderlist team that was intended to eventually replace Wunderlist and incorporate most of its features. As of January 2019, To-Do had not yet reached feature parity with Wunderlist, with its team citing that the service had to be completely re-written to use Microsoft Azure instead of Amazon Web Services. Frustrated by the perceived lack of roadmap, in September 2019, Reber began to publicly ask Microsoft-related accounts on Twitter whether he could buy Wunderlist back. Shortly afterward, however, Microsoft unveiled updates to To-Do that make it more closely resemble Wunderlist. In December 2019, Microsoft announced that it would fully shut down Wunderlist as of May 6, 2020. The team responsible for creating Wunderlist, led by co-founder Christian Reber, created that Superlist app in early 2024. == Finances == In its initial round of funding, 100,000 euro was invested in 6Wunderkinder by Frank Thelen and others. In December 2010, High-Tech Gründerfonds invested 500,000 euro (approximately US$660,000) in the company. T-Venture also invested an undisclosed amount in the startup. In its Series A round of funding in November 2011, Atomico invested $4.2 million (~$5.76 million in 2024) while High-Tech Gründerfonds invested an undisclosed additional amount. In May 2012, High-Tech Gründerfonds sold off its stake in 6Wunderkinder to Earlybird Venture Capital. In November 2013, $19 million (~$25.2 million in 2024) was raised in a Series B round led by Sequoia Capital with participation from Earlybird and Atomico. == Awards == In 2013, Wunderlist for Mac was named App of the Year. Wunderlist was selected as a Google Play Top Developer in 2013. In 2014, Wunderlist won the "Golden Mi" award from Xiaomi, and also named as one of its Best Apps of 2014 was given a "Google Play Editor's Choice" award, and was named in Google Play's Best Apps of 2014 as well as Apple's Best of 2014.

  Read more →
• 

  Haskins Laboratories

  Haskins Laboratories, Inc. is an independent research laboratory, founded in 1935 and located in New Haven, Connecticut since 1970. Many current Haskins researchers are affiliated with Yale University's Child Study Center and/or the University of Connecticut. Haskins is a multidisciplinary and international community of researchers who conduct basic research on spoken and written language and global literacy. A guiding perspective of their research has been to view speech and language as emerging from biological processes, including those of adaptation, response to stimuli, and conspecific interaction. Haskins Laboratories has a long history of technological and theoretical innovation, from creating systems of rules for speech synthesis and development of an early working prototype of a reading machine for the blind to developing the landmark concept of phonemic awareness as the critical preparation for learning to read an alphabetic writing system. == Research tools and facilities == Haskins Laboratories is equipped, in-house, with a comprehensive suite of tools and capabilities to advance its mission of research into language and literacy. As of 2014, these included: Anechoic chamber Electroencephalography BioSemi 264 electrode, 24 bit Active Two System EGI 128 electrode, Geodesic EEG System 300 Electromagnetic articulography (EMMA) Carstens AG501 NDI WAVE Eye tracking: HL is equipped with 3 SR Research eye-trackers. 2 Model Eyelink 1000 systems. 1 Model Eyelink 1000plus system. Magnetic resonance imaging: Haskins has access to MRI scanners through agreements with the University of Connecticut and the Yale School of Medicine. On-site, HL has a Linux computer cluster dedicated to analysis of MRI data. Motion capture: HL is equipped with a Vicon motion capture system with one Basler high-speed digital camera, six Vicon MX T-20 cameras and a Vicon MX Giganet for synching camera data and connecting cameras to the data capture computer. Near infrared spectroscopy: HL has a TechEn CW6 8x8 system (four emitters; eight detectors). Ultrasound sonogram == History == Many researchers have contributed to scientific breakthroughs at Haskins Laboratories since its founding. All of them are indebted to the pioneering work and leadership of Caryl Parker Haskins, Franklin S. Cooper, Alvin Liberman, Seymour Hutner and Luigi Provasoli. The history presented here focuses on the research program of the division of Haskins Laboratories that, since the 1940s, has been most well known for its work in the areas of speech, language, and reading. === 1930s === Caryl Haskins and Franklin S. Cooper established Haskins Laboratories in 1935. It was originally affiliated with Harvard University, MIT, and Union College in Schenectady, NY. Caryl Haskins conducted research in microbiology, radiation physics, and other fields in Cambridge, MA and Schenectady. In 1939 Haskins Laboratories moved its center to New York City. Seymour Hutner joined the staff to set up a research program in microbiology, genetics, and nutrition. The descendant of the division led by Hutner program eventually became a department of Pace University in New York. The two identically named organizations are no longer formally affiliated. === 1940s === The U. S. Office of Scientific Research and Development, under Vannevar Bush asked Haskins Laboratories to evaluate and develop technologies for assisting blinded World War II veterans. Experimental psychologist Alvin Liberman joined Haskins Laboratories to assist in developing a "sound alphabet" to represent the letters in a text for use in a reading machine for the blind. Luigi Provasoli joined Haskins Laboratories to set up a research program in marine biology. The program in marine biology moved to Yale University in 1970 and disbanded with Provasoli's retirement in 1978. === 1950s === Franklin S. Cooper invented the pattern playback, a machine that converts pictures of the acoustic patterns of speech back into sound. With this device, Alvin Liberman, Cooper, and Pierre Delattre (and later joined by Katherine Safford Harris, Leigh Lisker, Arthur Abramson, and others), discovered the acoustic cues for the perception of phonetic segments (consonants and vowels). Liberman and colleagues proposed a motor theory of speech perception to resolve the acoustic complexity: they hypothesized that we perceive speech by tapping into a biological specialization, a speech module, that contains knowledge of the acoustic consequences of articulation. Liberman, aided by Frances Ingemann and others, organized the results of the work on speech cues into a groundbreaking set of rules for speech synthesis by the Pattern Playback. === 1960s === Franklin S. Cooper and Katherine Safford Harris, working with Peter MacNeilage, were the first researchers in the U.S. to use electromyographic techniques, pioneered at the University of Tokyo, to study the neuromuscular organization of speech. Leigh Lisker and Arthur Abramson looked for simplification at the level of articulatory action in the voicing of certain contrasting consonants. They showed that many acoustic properties of voicing contrasts arise from variations in voice onset time, the relative phasing of the onset of vocal cord vibration and the end of a consonant. Their work has been widely replicated and elaborated, here and abroad, over the following decades. Donald Shankweiler and Michael Studdert-Kennedy used a dichotic listening technique (presenting different nonsense syllables simultaneously to opposite ears) to demonstrate the dissociation of phonetic (speech) and auditory (nonspeech) perception by finding that phonetic structure devoid of meaning is an integral part of language, typically processed in the left cerebral hemisphere. Liberman, Cooper, Shankweiler, and Studdert-Kennedy summarized and interpreted fifteen years of research in "Perception of the Speech Code", still among the most cited papers in the speech literature. It set the agenda for many years of research at Haskins and elsewhere by describing speech as a code in which speakers overlap (or coarticulate) segments to form syllables. Researchers at Haskins connected their first computer to a speech synthesizer designed by Haskins Laboratories' engineers. Ignatius Mattingly, with British collaborators, John N. Holmes and J.N. Shearme, adapted the Pattern playback rules to write the first computer program for synthesizing continuous speech from a phonetically spelled input. A further step toward a reading machine for the blind combined Mattingly's program with an automatic look-up procedure for converting alphabetic text into strings of phonetic symbols. === 1970s === In 1970, Haskins Laboratories moved to New Haven, Connecticut, and entered into affiliation agreements with Yale University and the University of Connecticut; Haskins remains fully independent of both Yale and UConn, administratively and financially. The lab's original location in New Haven, at 270 Crown Street (from 1970 to 2005), was leased from Yale University. Isabelle Liberman, Donald Shankweiler, and Alvin Liberman teamed up with Ignatius Mattingly to study the relationship between speech perception and reading, a topic implicit in Haskins Laboratories' research program since its inception. They developed the concept of phonemic awareness, the knowledge that would-be readers must be aware of the phonemic structure of their language in order to be able to read. Leonard Katz related the work to contemporary cognitive theory and provided expertise in experimental design and data analysis. Under the broad rubric of the "alphabetic principle", this is the core of the lab's present program of reading pedagogy. Patrick Nye joined Haskins Laboratories to lead a team working on the reading machine for the blind. The project culminated when the addition of an optical character recognizer allowed investigators to assemble the first automatic text-to-speech reading machine. By the end of the decade this technology had advanced to the point where commercial concerns assumed the task of designing and manufacturing reading machines for the blind. In 1973, Franklin S. Cooper was selected to form a panel of six experts charged with investigating the famous 18-minute gap in the White House office tapes of President Richard Nixon related to the Watergate scandal. Building on earlier work, Philip Rubin developed the sinewave synthesis program, which was then used by Robert Remez, Rubin, and colleagues to show that listeners can perceive continuous speech without traditional speech cues from a pattern of sinewaves that track the changing resonances of the vocal tract. This paved the way for a view of speech as a dynamic pattern of trajectories through articulatory-acoustic space. Philip Rubin and colleagues developed Paul Mermelstein's anatomically simplified vocal tract model, originally worked on at Bell Laboratories, into the first articulatory synthesizer that can be controlled in a phy

  Read more →
• 

  DeepRoute.ai

  DeepRoute.ai (Chinese: 元戎启行) is a Chinese autonomous driving company founded in 2019 and headquartered in Shenzhen, China. The company develops full-stack self-driving solutions including perception, decision-making, and control systems. == History == DeepRoute.ai was founded in February 2019 in Shenzhen, China, by Zhou Guang (周光), who serves as the company's CEO. In September 2019, the company collaborated with Dongfeng for a live-streamed autonomous driving demonstration. In October 2019, during the 7th Military World Games, DeepRoute.ai conducted Robotaxi demonstration operations. In November 2019, it obtained an intelligent connected vehicle road test permit for public roads in Shenzhen. In October 2020, DeepRoute.ai signed an "Autonomous Driving Leadership Project" with Dongfeng to build one of China's largest autonomous fleets. In August 2020, DeepRoute.ai announced its partnership with Cao Cao Mobility, a Geely-backed ride-hailing company, to test Robotaxis in Hangzhou for daily operations, planning to provide Robotaxis during the 2022 Asian Games. In September 2021, DeepRoute.ai secured US$300 million in a Series B funding round led by Alibaba. In December 2021, the company unveiled its DeepRoute-Driver 2.0, an L4-level autonomous driving solution comprising five solid-state lidar sensors, eight cameras, a proprietary computing system and an optional millimeter-wave radar. with a production cost of under US$10,000. In June 2022, it partnered with Deppon Express to provide autonomous light truck freight transfer services. In March 2023, the company launched its high-precision map-free intelligent driving solution, DeepRoute-Driver 3.0. In November 2024, Great Wall Motor announced a $100 million Series C funding round for Deeproute. With this, Deeproute has completed five rounds of financing, raising a cumulative total of over $500 million. Its shareholders include Fosun RZ Capital, Yunqi Partners, Alibaba, Vision Plus Capital, and Dongfeng, among others. In the same month, Deeproute.ai emphasised that they were in "deep cooperation" with Nvidia and spoke on being part of the first batch of companies in China to get a hold of Nvidia's newer Thor chip for cars which will be used in a new system released next year. This new system will help manage more complex driving scenarios through visual cues. == Products == === VLA Model === VLA Model is a Vision–language–action model designed for autonomous driving systems. It integrates visual perception, semantic understanding, and action decision-making into a unified framework, aiming to enhance the safety and adaptability of advanced driver-assistance systems (ADAS) in complex road environments. The model was officially launched on August 26, 2025, as the core of DeepRoute.ai's DeepRoute IO 2.0 platform. The VLA model is characterized by its "visual-language-action" architecture, which incorporates a chain-of-thought (CoT) reasoning capability inspired by large language models. This design is intended to address the "black box" limitations of traditional end-to-end autonomous driving systems by enabling the model to analyze information, infer causality, and make decisions in a more transparent and interpretable manner. === Appliance === The company has partnered with several automakers including Dongfeng Motor Corporation and Geely to develop and test autonomous vehicles.

  Read more →
• 

  YrWall

  YrWall is a Digital Graffiti Wall developed by event company Luma, where designs are created on a large wall using a modified spray paint can. The can contains no paint, instead it has an IR light which is tracked by a computer vision system and the image immediately back-projected onto the wall. The inbuilt YrWall software has much of the functionality of a typical computer paint program, with a pop-out interface which enables users to change colour, spray width, opacity, work with stencils and use animated items such as swirls, stars, drips and splats. Recent additions to YrWall include options to email a JPEG of the completed design and create personalised stickers and T-shirts. == Dragons' Den == The inventor of YrWall, Tom Hogan, and his business partner, Tim Williams, appeared on Episode 4 of Series 8 of the BBC show Dragons' Den. Seeking investment in YrWall, the entrepreneurs were successful in gaining £50,000 for 40% of the YrWall parent company Lumacoustics from Dragons Deborah Meaden and Peter Jones. == World's Largest Interactive Graffiti Wall == In September 2009 YrWall was used to create the 'World's Largest Interactive Graffiti Wall' at the Bristol Festival, UK. Artists used the standard 3.5 m2 YrWall to produce artwork which was in turn projected live onto a 26m x 10m space on the side of the iconic Lloyds amphitheatre building.

  Read more →
• 

  Absher (application)

  Absher (Arabic: أبشر ‘Absher, roughly meaning "good tidings" or "yes, done") is a smartphone application and web portal which allows citizens and residents of Saudi Arabia to use a variety of governmental services. Amongst several other services with the Absher app, it can be used to apply for jobs and Hajj permits, passport info can be updated, and electronic crimes can be reported. The application provides around 280 services for residents of Saudi Arabia including but not limited to making appointments, renewing passports, residents' cards, IDs, driver's licenses and others, and, controversially, enables Saudi men to track the whereabouts of women they control as part of the country's male guardianship system. The app can be downloaded from the Google Play Store and Apple App Store and is supplied by the Saudi Interior Ministry. According to the Ministry of the Interior, Absher has more than 20 million users. As of February 2019, Absher has been downloaded 4.2 million times from the App Store. Some services provided through Absher can also be accessed through the website absher.sa. In March 2021, Saudi Arabia launched the digital version of the Absher for individuals app through which the users can download a copy of their digital ID. Then, new services were added to the platform such as online birth and death registration services, requesting amendments to academic credentials, correcting names in English and marital status and requesting civil records of children. == Impact on women's rights == The app has been criticized by various human rights activists, human rights organisations and international communities. The US and European countries have also condemned the app and urged the kingdom to end its male guardianship system. Absher gained media attention in 2019 for its functions supporting the Saudi policy of male guardianship following an investigation by Business Insider. The app allows for designated guardians to receive notifications if a woman under their guardianship passes through an airport and subsequently gives them the option to withdraw her right to travel. In a few cases, this system has been circumvented by women who have been able to gain control over its settings and use it to allow themselves to travel. US Senator Ron Wyden of Oregon wrote a letter to the CEO's of Apple and Google, criticizing the app and demanding for its removal immediately. Wyden said "American companies should not enable or facilitate the Saudi government's patriarchy," and called the Saudi system of control over women "abhorrent". According to the EU lawmakers, current rules imposed over the women by the Saudi government make women “second-class citizens”. The lawmakers also asked the EU states to continue to build pressure on Riyadh so as to improve the conditions of women and human rights. Amnesty International and Human Rights Watch accused Apple and Google of helping "enforce gender apartheid" by hosting the app. US congresswomen Rep. Katherine Clark and Rep. Carolyn B. Maloney condemned the kingdom's male guardianship system that reflected from the app, calling Absher a "patriarchal weapon" and asking for its removal. In response to the criticism received by Absher, Apple chief executive officer Tim Cook stated in February 2019 that he intended to investigate the situation. Similarly, Google announced that it would also review the application. After a prompt review, Google declined to remove the app from Google Play, citing that it did not violate the agreed upon terms and conditions of the store. Saudi doctor Khawla Al-Kuraya supported this app an editorial in Bloomberg News. Kuraya wrote that Absher helped Saudi women avoid governmental bureaucracy as it allows their male guardians to process their travel permits anywhere and anytime through Absher. Although she believes that the guardianship system needs to be reconsidered, she thinks that Absher is an important step towards facilitating women-guardians related issues in Saudi Arabia. Absher manager Atiyah Al-Anazy announced in 2019 that two million women were using the application in Saudi Arabia to facilitate their transactions. Some female users stated that the application has made their movement and travel-related issues easier. New measures were introduced that year to allow Saudi women above the age of 18 to travel without their male guardians, which ultimately released male authoritative rights on women. A law was subsequently passed allowing women over the age of 21 to receive a passport and travel without prior male permission.

  Read more →
• 

  Spherical basis

  In pure and applied mathematics, particularly quantum mechanics and computer graphics and their applications, a spherical basis is the basis used to express spherical tensors. The spherical basis closely relates to the description of angular momentum in quantum mechanics and spherical harmonic functions. While spherical polar coordinates are one orthogonal coordinate system for expressing vectors and tensors using polar and azimuthal angles and radial distance, the spherical basis are constructed from the standard basis and use complex numbers. == In three dimensions == A vector A in 3D Euclidean space R3 can be expressed in the familiar Cartesian coordinate system in the standard basis ex, ey, ez, and coordinates Ax, Ay, Az: or any other coordinate system with associated basis set of vectors. From this extend the scalars to allow multiplication by complex numbers, so that we are now working in C 3 {\displaystyle \mathbb {C} ^{3}} rather than R 3 {\displaystyle \mathbb {R} ^{3}} . === Basis definition === In the spherical bases denoted e+, e−, e0, and associated coordinates with respect to this basis, denoted A+, A−, A0, the vector A is: where the spherical basis vectors can be defined in terms of the Cartesian basis using complex-valued coefficients in the xy plane: in which i {\displaystyle i} denotes the imaginary unit, and one normal to the plane in the z direction: e 0 = e z {\displaystyle \mathbf {e} _{0}=\mathbf {e} _{z}} The inverse relations are: === Commutator definition === While giving a basis in a 3-dimensional space is a valid definition for a spherical tensor, it only covers the case for when the rank k {\displaystyle k} is 1. For higher ranks, one may use either the commutator, or rotation definition of a spherical tensor. The commutator definition is given below, any operator T q ( k ) {\displaystyle T_{q}^{(k)}} that satisfies the following relations is a spherical tensor: [ J ± , T q ( k ) ] = ℏ ( k ∓ q ) ( k ± q + 1 ) T q ± 1 ( k ) {\displaystyle [J_{\pm },T_{q}^{(k)}]=\hbar {\sqrt {(k\mp q)(k\pm q+1)}}T_{q\pm 1}^{(k)}} [ J z , T q ( k ) ] = ℏ q T q ( k ) {\displaystyle [J_{z},T_{q}^{(k)}]=\hbar qT_{q}^{(k)}} === Rotation definition === Analogously to how the spherical harmonics transform under a rotation, a general spherical tensor transforms as follows, when the states transform under the unitary Wigner D-matrix D ( R ) {\displaystyle {\mathcal {D}}(R)} , where R is a (3×3 rotation) group element in SO(3). That is, these matrices represent the rotation group elements. With the help of its Lie algebra, one can show these two definitions are equivalent. D ( R ) T q ( k ) D † ( R ) = ∑ q ′ = − k k T q ′ ( k ) D q ′ q ( k ) {\displaystyle {\mathcal {D}}(R)T_{q}^{(k)}{\mathcal {D}}^{\dagger }(R)=\sum _{q'=-k}^{k}T_{q'}^{(k)}{\mathcal {D}}_{q'q}^{(k)}} === Coordinate vectors === For the spherical basis, the coordinates are complex-valued numbers A+, A0, A−, and can be found by substitution of (3B) into (1), or directly calculated from the inner product ⟨, ⟩ (5): A 0 = ⟨ e 0 , A ⟩ = ⟨ e z , A ⟩ = A z {\displaystyle A_{0}=\left\langle \mathbf {e} _{0},\mathbf {A} \right\rangle =\left\langle \mathbf {e} _{z},\mathbf {A} \right\rangle =A_{z}} with inverse relations: In general, for two vectors with complex coefficients in the same real-valued orthonormal basis ei, with the property ei·ej = δij, the inner product is: where · is the usual dot product and the complex conjugate must be used to keep the magnitude (or "norm") of the vector positive definite. == Properties (three dimensions) == === Orthonormality === The spherical basis is an orthonormal basis, since the inner product ⟨, ⟩ (5) of every pair vanishes meaning the basis vectors are all mutually orthogonal: ⟨ e + , e − ⟩ = ⟨ e − , e 0 ⟩ = ⟨ e 0 , e + ⟩ = 0 {\displaystyle \left\langle \mathbf {e} _{+},\mathbf {e} _{-}\right\rangle =\left\langle \mathbf {e} _{-},\mathbf {e} _{0}\right\rangle =\left\langle \mathbf {e} _{0},\mathbf {e} _{+}\right\rangle =0} and each basis vector is a unit vector: ⟨ e + , e + ⟩ = ⟨ e − , e − ⟩ = ⟨ e 0 , e 0 ⟩ = 1 {\displaystyle \left\langle \mathbf {e} _{+},\mathbf {e} _{+}\right\rangle =\left\langle \mathbf {e} _{-},\mathbf {e} _{-}\right\rangle =\left\langle \mathbf {e} _{0},\mathbf {e} _{0}\right\rangle =1} hence the need for the normalizing factors of 1 / 2 {\displaystyle 1/\!{\sqrt {2}}} . === Change of basis matrix === The defining relations (3A) can be summarized by a transformation matrix U: ( e + e − e 0 ) = U ( e x e y e z ) , U = ( − 1 2 − i 2 0 + 1 2 − i 2 0 0 0 1 ) , {\displaystyle {\begin{pmatrix}\mathbf {e} _{+}\\\mathbf {e} _{-}\\\mathbf {e} _{0}\end{pmatrix}}=\mathbf {U} {\begin{pmatrix}\mathbf {e} _{x}\\\mathbf {e} _{y}\\\mathbf {e} _{z}\end{pmatrix}}\,,\quad \mathbf {U} ={\begin{pmatrix}-{\frac {1}{\sqrt {2}}}&-{\frac {i}{\sqrt {2}}}&0\\+{\frac {1}{\sqrt {2}}}&-{\frac {i}{\sqrt {2}}}&0\\0&0&1\end{pmatrix}}\,,} with inverse: ( e x e y e z ) = U − 1 ( e + e − e 0 ) , U − 1 = ( − 1 2 + 1 2 0 + i 2 + i 2 0 0 0 1 ) . {\displaystyle {\begin{pmatrix}\mathbf {e} _{x}\\\mathbf {e} _{y}\\\mathbf {e} _{z}\end{pmatrix}}=\mathbf {U} ^{-1}{\begin{pmatrix}\mathbf {e} _{+}\\\mathbf {e} _{-}\\\mathbf {e} _{0}\end{pmatrix}}\,,\quad \mathbf {U} ^{-1}={\begin{pmatrix}-{\frac {1}{\sqrt {2}}}&+{\frac {1}{\sqrt {2}}}&0\\+{\frac {i}{\sqrt {2}}}&+{\frac {i}{\sqrt {2}}}&0\\0&0&1\end{pmatrix}}\,.} It can be seen that U is a unitary matrix, in other words its Hermitian conjugate U† (complex conjugate and matrix transpose) is also the inverse matrix U−1. For the coordinates: ( A + A − A 0 ) = U ∗ ( A x A y A z ) , U ∗ = ( − 1 2 + i 2 0 + 1 2 + i 2 0 0 0 1 ) , {\displaystyle {\begin{pmatrix}A_{+}\\A_{-}\\A_{0}\end{pmatrix}}=\mathbf {U} ^{\mathrm {} }{\begin{pmatrix}A_{x}\\A_{y}\\A_{z}\end{pmatrix}}\,,\quad \mathbf {U} ^{\mathrm {} }={\begin{pmatrix}-{\frac {1}{\sqrt {2}}}&+{\frac {i}{\sqrt {2}}}&0\\+{\frac {1}{\sqrt {2}}}&+{\frac {i}{\sqrt {2}}}&0\\0&0&1\end{pmatrix}}\,,} and inverse: ( A x A y A z ) = ( U ∗ ) − 1 ( A + A − A 0 ) , ( U ∗ ) − 1 = ( − 1 2 + 1 2 0 − i 2 − i 2 0 0 0 1 ) . {\displaystyle {\begin{pmatrix}A_{x}\\A_{y}\\A_{z}\end{pmatrix}}=(\mathbf {U} ^{\mathrm {} })^{-1}{\begin{pmatrix}A_{+}\\A_{-}\\A_{0}\end{pmatrix}}\,,\quad (\mathbf {U} ^{\mathrm {} })^{-1}={\begin{pmatrix}-{\frac {1}{\sqrt {2}}}&+{\frac {1}{\sqrt {2}}}&0\\-{\frac {i}{\sqrt {2}}}&-{\frac {i}{\sqrt {2}}}&0\\0&0&1\end{pmatrix}}\,.} === Cross products === Taking cross products of the spherical basis vectors, we find an obvious relation: e q × e q = 0 {\displaystyle \mathbf {e} _{q}\times \mathbf {e} _{q}={\boldsymbol {0}}} where q is a placeholder for +, −, 0, and two less obvious relations: e ± × e ∓ = ± i e 0 {\displaystyle \mathbf {e} _{\pm }\times \mathbf {e} _{\mp }=\pm i\mathbf {e} _{0}} e ± × e 0 = ± i e ± {\displaystyle \mathbf {e} _{\pm }\times \mathbf {e} _{0}=\pm i\mathbf {e} _{\pm }} === Inner product in the spherical basis === The inner product between two vectors A and B in the spherical basis follows from the above definition of the inner product: ⟨ A , B ⟩ = A + B + ⋆ + A − B − ⋆ + A 0 B 0 ⋆ {\displaystyle \left\langle \mathbf {A} ,\mathbf {B} \right\rangle =A_{+}B_{+}^{\star }+A_{-}B_{-}^{\star }+A_{0}B_{0}^{\star }}

  Read more →
• 

  Pixel-art scaling algorithms

  Pixel art scaling algorithms are graphical filters that attempt to enhance the appearance of hand-drawn 2D pixel art graphics. These algorithms are a form of automatic image enhancement. Pixel art scaling algorithms employ methods significantly different than the common methods of image rescaling, which have the goal of preserving the appearance of images. As pixel art graphics are commonly used at very low resolutions, they employ careful coloring of individual pixels. This results in graphics that rely on a high amount of stylized visual cues to define complex shapes. Several specialized algorithms have been developed to handle re-scaling of such graphics. These specialized algorithms can improve the appearance of pixel-art graphics, but in doing so they introduce changes. Such changes may be undesirable, especially if the goal is to faithfully reproduce the original appearance. Since a typical application of this technology is improving the appearance of fourth-generation and earlier video games on arcade and console emulators, many pixel art scaling algorithms are designed to run in real-time for sufficiently small input images at 60-frames per second. This places constraints on the type of programming techniques that can be used for this sort of real-time processing. Many work only on specific scale factors. 2× is the most common scale factor, while 3×, 4×, 5×, and 6× exist but are less used. == Algorithms == === SAA5050 'Diagonal Smoothing' === The Mullard SAA5050 Teletext character generator chip (1980) used a primitive pixel scaling algorithm to generate higher-resolution characters on the screen from a lower-resolution representation from its internal ROM. Internally, each character shape was defined on a 5 × 9 pixel grid, which was then interpolated by smoothing diagonals to give a 10 × 18 pixel character, with a characteristically angular shape, surrounded to the top and the left by two pixels of blank space. The algorithm only works on monochrome source data, and assumes the source pixels will be logically true or false depending on whether they are 'on' or 'off'. Pixels 'outside the grid pattern' are assumed to be off. The algorithm works as follows: A B C --\ 1 2 D E F --/ 3 4 1 = B | (A & E & !B & !D) 2 = B | (C & E & !B & !F) 3 = E | (!A & !E & B & D) 4 = E | (!C & !E & B & F) Note that this algorithm, like the Eagle algorithm below, has a flaw: If a pattern of 4 pixels in a hollow diamond shape appears, the hollow will be obliterated by the expansion. The SAA5050's internal character ROM carefully avoids ever using this pattern. The degenerate case: becomes: === EPX/Scale2×/AdvMAME2× === Eric's Pixel Expansion (EPX) is an algorithm developed by Eric Johnston at LucasArts around 1992, when porting the SCUMM engine games from the IBM PC (which ran at 320 × 200 × 256 colors) to the early color Macintosh computers, which ran at more or less double that resolution. The algorithm works as follows, expanding P into 4 new pixels based on P's surroundings: 1=P; 2=P; 3=P; 4=P; IF C==A => 1=A IF A==B => 2=B IF D==C => 3=C IF B==D => 4=D IF of A, B, C, D, three or more are identical: 1=2=3=4=P Later implementations of this same algorithm (as AdvMAME2× and Scale2×, developed around 2001) are slightly more efficient but functionally identical: 1=P; 2=P; 3=P; 4=P; IF C==A AND C!=D AND A!=B => 1=A IF A==B AND A!=C AND B!=D => 2=B IF D==C AND D!=B AND C!=A => 3=C IF B==D AND B!=A AND D!=C => 4=D AdvMAME2× is available in DOSBox via the scaler=advmame2x dosbox.conf option. The AdvMAME4×/Scale4× algorithm is just EPX applied twice to get 4× resolution. ==== Scale3×/AdvMAME3× and ScaleFX ==== The AdvMAME3×/Scale3× algorithm (available in DOSBox via the scaler=advmame3x dosbox.conf option) can be thought of as a generalization of EPX to the 3× case. The corner pixels are calculated identically to EPX. 1=E; 2=E; 3=E; 4=E; 5=E; 6=E; 7=E; 8=E; 9=E; IF D==B AND D!=H AND B!=F => 1=D IF (D==B AND D!=H AND B!=F AND E!=C) OR (B==F AND B!=D AND F!=H AND E!=A) => 2=B IF B==F AND B!=D AND F!=H => 3=F IF (H==D AND H!=F AND D!=B AND E!=A) OR (D==B AND D!=H AND B!=F AND E!=G) => 4=D 5=E IF (B==F AND B!=D AND F!=H AND E!=I) OR (F==H AND F!=B AND H!=D AND E!=C) => 6=F IF H==D AND H!=F AND D!=B => 7=D IF (F==H AND F!=B AND H!=D AND E!=G) OR (H==D AND H!=F AND D!=B AND E!=I) => 8=H IF F==H AND F!=B AND H!=D => 9=F There is also a variant improved over Scale3× called ScaleFX, developed by Sp00kyFox, and a version combined with Reverse-AA called ScaleFX-Hybrid. === Eagle === Eagle works as follows: for every in pixel, we will generate 4 out pixels. First, set all 4 to the color of the pixel we are currently scaling (as nearest-neighbor). Next look at the three pixels above, to the left, and diagonally above left: if all three are the same color as each other, set the top left pixel of our output square to that color in preference to the nearest-neighbor color. Work similarly for all four pixels, and then move to the next one. Assume an input matrix of 3 × 3 pixels where the centermost pixel is the pixel to be scaled, and an output matrix of 2 × 2 pixels (i.e., the scaled pixel) first: |Then . . . --\ CC |S T U --\ 1 2 . C . --/ CC |V C W --/ 3 4 . . . |X Y Z | IF V==S==T => 1=S | IF T==U==W => 2=U | IF V==X==Y => 3=X | IF W==Z==Y => 4=Z Thus if we have a single black pixel on a white background it will vanish. This is a bug in the Eagle algorithm but is solved by other algorithms such as EPX, 2xSaI, and HQ2x. === 2×SaI === 2×SaI, short for 2× Scale and Interpolation engine, was inspired by Eagle. It was designed by Derek Liauw Kie Fa, also known as Kreed, primarily for use in console and computer emulators, and it has remained fairly popular in this niche. Many of the most popular emulators, including ZSNES and VisualBoyAdvance, offer this scaling algorithm as a feature. Several slightly different versions of the scaling algorithm are available, and these are often referred to as Super 2×SaI and Super Eagle. The 2xSaI family works on a 4 × 4 matrix of pixels where the pixel marked A below is scaled: I E F J G A B K --\ W X H C D L --/ Y Z M N O P For 16-bit pixels, they use pixel masks which change based on whether the 16-bit pixel format is 565 or 555. The constants colorMask, lowPixelMask, qColorMask, qLowPixelMask, redBlueMask, and greenMask are 16-bit masks. The lower 8 bits are identical in either pixel format. Two interpolation functions are described: INTERPOLATE(uint32 A, UINT32 B). -- linear midpoint of A and B if (A == B) return A; return ( ((A & colorMask) >> 1) + ((B & colorMask) >> 1) + (A & B & lowPixelMask) ); Q_INTERPOLATE(uint32 A, uint32 B, uint32 C, uint32 D) -- bilinear interpolation; A, B, C, and D's average x = ((A & qColorMask) >> 2) + ((B & qColorMask) >> 2) + ((C & qColorMask) >> 2) + ((D & qColorMask) >> 2); y = (A & qLowPixelMask) + (B & qLowPixelMask) + (C & qLowPixelMask) + (D & qLowPixelMask); y = (y >> 2) & qLowPixelMask; return x + y; The algorithm checks A, B, C, and D for a diagonal match such that A==D and B!=C, or the other way around, or if they are both diagonals or if there is no diagonal match. Within these, it checks for three or four identical pixels. Based on these conditions, the algorithm decides whether to use one of A, B, C, or D, or an interpolation among only these four, for each output pixel. The 2xSaI arbitrary scaler can enlarge any image to any resolution and uses bilinear filtering to interpolate pixels. Since Kreed released the source code under the GNU General Public License, it is freely available to anyone wishing to utilize it in a project released under that license. Developers wishing to use it in a non-GPL project would be required to rewrite the algorithm without using any of Kreed's existing code. It is available in DOSBox via scaler=2xsai option. === hqnx family === Maxim Stepin's hq2x, hq3x, and hq4x are for scale factors of 2:1, 3:1, and 4:1 respectively. Each work by comparing the color value of each pixel to those of its eight immediate neighbors, marking the neighbors as close or distant, and using a pre-generated lookup table to find the proper proportion of input pixels' values for each of the 4, 9 or 16 corresponding output pixels. The hq3x family will perfectly smooth any diagonal line whose slope is ±0.5, ±1, or ±2 and which is not anti-aliased in the input; one with any other slope will alternate between two slopes in the output. It will also smooth very tight curves. Unlike 2xSaI, it anti-aliases the output. hqnx was initially created for the Super NES emulator ZSNES. The author of bsnes has released a space-efficient implementation of hq2x to the public domain. A port to shaders, which has comparable quality to the early versions of xBR, is available. Before the port, a shader called "scalehq" has often been confused for hqx. === xBR family === There are 6 filters in this family: xBR , xBRZ, xBR-Hybrid, Super xBR, xBR+3D and Super xBR+3D. xBR ("scale by rules"), cre

  Read more →
• 

  COVID-19 apps

  COVID-19 apps include mobile-software applications for digital contact-tracing—i.e. the process of identifying persons ("contacts") who may have been in contact with an infected individual—deployed during the COVID-19 pandemic. Numerous tracing applications have been developed or proposed, with official government support in some territories and jurisdictions. Several frameworks for building contact-tracing apps have been developed. Privacy concerns have been raised, especially about systems that are based on tracking the geographical location of app users. Less overtly intrusive alternatives include the co-option of Bluetooth signals to log a user's proximity to other cellphones. (Bluetooth technology has form in tracking cell-phones' locations.)) On 10 April 2020, Google and Apple jointly announced that they would integrate functionality to support such Bluetooth-based apps directly into their Android and iOS operating systems. India's COVID-19 tracking app Aarogya Setu became the world's fastest growing application—beating Pokémon Go—with 50 million users in the first 13 days of its release. == Rationale == Contact tracing is an important tool in infectious disease control, but as the number of cases rises time constraints make it more challenging to effectively control transmission. Digital contact tracing, especially if widely deployed, may be more effective than traditional methods of contact tracing. In a March 2020 model by the University of Oxford Big Data Institute's Christophe Fraser's team, a coronavirus outbreak in a city of one million people is halted if 80% of all smartphone users take part in a tracking system; in the model, the elderly are still expected to self-isolate en masse, but individuals who are neither symptomatic nor elderly are exempt from isolation unless they receive an alert that they are at risk of carrying the disease. Some proponents advocate for legislation exempting certain COVID-19 apps from general privacy restrictions. == Issues == === Uptake === Ross Anderson, professor of security engineering at Cambridge University, listed a number of potential practical problems with app-based systems, including false positives and the potential lack of effectiveness if takeup of the app is limited to only a small fraction of the population. In Singapore, only one person in three had downloaded the TraceTogether app by the end of June 2020, despite legal requirements for most workers; the app was also underused, as it required users to keep it open at all times on iOS. A team at the University of Oxford simulated the effect of a contact tracing app on a city of 1 million. They estimated that if the app was used in conjunction with the shielding of over-70s, then 56% of the population would have to be using the app for it to suppress the virus. This would be equivalent to 80% of smartphone users in the United Kingdom. They found that the app could still slow the spread of the virus if fewer people downloaded it, with one infection being prevented for every one or two users. In August 2020, the American Civil Liberties Union (ACLU) argued that there were disparities in smartphone use between demographics and minority groups, and that "even the most comprehensive, all-seeing contact tracing system is of little use without social and medical systems in place to help those who may have the virus — including access to medical care, testing, and support for those who are quarantined." === App store restrictions === Addressing concerns about the spread of misleading or harmful apps, Apple, Google and Amazon set limits on which types of organizations could add coronavirus-related apps to its App Store, limiting them to only "official" or otherwise reputable organizations. === Ethical principles of mass surveillance using COVID-19 contact tracing apps === The advent of COVID-19 contact tracing apps has led to concerns around privacy, the rights of app users, and governmental authority. The European Convention on Human Rights, the International Covenant on Civil and Political Rights (ICCPR) and the United Nations and the Siracusa Principles have outlined 4 principles to consider when looking at the ethical principles of mass surveillance with COVID-19 contact tracing apps. These are necessity, proportionality, scientific validity, and time boundedness. Necessity is defined as the idea that governments should only interfere with a person's rights when deemed essential for public health interests. The potential risks associated with infringements of personal privacy must be outweighed by the possibility of reducing significant harm to others. Potential benefits of contact-tracing apps that may be considered include allowing for blanket population-level quarantine measures to be lifted sooner and the minimization of people under quarantine. Hence, some contend that contact-tracing apps are justified as they may be less intrusive than blanket quarantine measures. Furthermore, the delay of an effective contact-tracing app with significant health and economic benefits may be considered unethical. Proportionality refers to the concept that a contact tracing app's potential negative impact on a person's rights should be justifiable by the severity of the health risks that are being addressed. Apps must use the most privacy-preserving options available to achieve their goals, and the selected option should not only be a logical option for achieving the goal but also an effective one. Scientific validity evaluates whether an app is effective, timely and accurate. Traditional manual contact-tracing procedures are not efficient enough for the COVID-19 pandemic, and do not consider asymptomatic transmission. Contact-tracing apps, on the other hand, can be effective COVID-19 contact-tracing tools that reduce R value to less than 1, leading to sustained epidemic suppression. However, for apps to be effective, there needs to be a minimum 56-60% uptake in the population. Apps should be continually modified to reflect current knowledge on the diseases being monitored. Some argue that contact-tracing apps should be considered societal experimental trials where results and adverse effects are evaluated according to the stringent guidelines of social experiments. Analyses should be conducted by independent research bodies and published for wide dissemination. Despite the current urgency of our pandemic situation, we should still adhere to the standard rigors of scientific evaluation. Time boundedness describe the need for establishing legal and technical sunset clauses so that they are only allowed to operate as long as necessary to address the pandemic situation. Apps should be withdrawn as soon as possible after the end of the pandemic. If the end of the pandemic cannot be predicted, the use of apps should be regularly reviewed and decisions about continued use should be made at each review. Collected data should only be retained by public health authorities for research purposes with clear stipulations on how long the data will be held for and who will be responsible for security, oversight, and ownership. === Privacy, discrimination and marginalisation concerns === The American Civil Liberties Union (ACLU) has published a set of principles for technology-assisted contact tracing and Amnesty International and over 100 other organizations issued a statement calling for limits on this kind of surveillance. The organisations declared eight conditions on governmental projects: surveillance would have to be "lawful, necessary and proportionate"; extensions of monitoring and surveillance would have to have sunset clauses; the use of data would have to be limited to COVID-19 purposes; data security and anonymity would have to be protected and shown to be protected based on evidence; digital surveillance would have to address the risk of exacerbating discrimination and marginalisation; any sharing of data with third parties would have to be defined in law; there would have to be safeguards against abuse and the rights of citizens to respond to abuses; "meaningful participation" by all "relevant stakeholders" would be required, including that of public health experts and marginalised groups. The German Chaos Computer Club (CCC) and Reporters Without Borders also issued checklists. The Exposure Notification service intends to address the problem of persistent surveillance by removing the tracing mechanism from their device operating systems once it is no longer needed. On 20 April 2020, it was reported that over 300 academics had signed a statement favouring decentralised proximity tracing applications over centralised models, given the difficulty in precluding centralised options being used "to enable unwarranted discrimination and surveillance." In a centralised model, a central database records the ID codes of meetings between users. In a decentralised model, this information is recorded on individual phones, with the role of the central

  Read more →
• 

  Multimedia database

  A Multimedia database (MMDB) is a collection of related for multimedia data. The multimedia data include one or more primary media data types such as text, images, graphic objects (including drawings, sketches and illustrations) animation sequences, audio and video. A Multimedia Database Management System (MMDBMS) is a framework that manages different types of data potentially represented in a wide diversity of formats on a wide array of media sources. It provides support for multimedia data types, and facilitate for creation, storage, access, query and control of a multimedia database. == Contents of MMDB == A Multimedia Database (MMDB) hosts one or more multimedia data types (i.e. text, images, graphic objects, audio, video, animation sequences). These data types are broadly categorized into three classes: Static media (time-independent: image and graphic object). Dynamic media (time-dependent: audio, video and animation). Dimensional media(3D game and computer aided drafting programs). === Comparison of multimedia data types === Additionally, a Multimedia Database (MMDB) needs to manage additional information pertaining to the actual multimedia data. The information is about the following: Media data: the actual data representing an object. Media format data: information about the format of the media data after it goes through the acquisition, processing, and encoding phases. Media keyword data: the keyword descriptions, usually relating to the generation of the media data. Media feature data: content dependent data such as contain information about the distribution of colours, the kinds of textures and the different shapes present in an image. The last three types are called metadata as they describe several different aspects of the media data. The media keyword data and media feature data are used as indices for searching purpose. The media format data is used to present the retrieved information. == Requirements of Multimedia databases == Like the traditional databases, Multimedia databases should address the following requirements: Integration Data items do not need to be duplicated for different programs invocations Data independence Separate the database and the management from the application programs Concurrency control Allows concurrent transactions Persistence Data objects can be saved and re-used by different transactions and program invocations Privacy Access and authorization control Integrity control Ensures database consistency between transactions Recovery Failures of transactions should not affect the persistent data storage Query support Allows easy querying of multimedia data Multimedia databases should have the ability to uniformly query data (media data, textual data) represented in different formats and have the ability to simultaneously query different media sources and conduct classical database operations across them. (Query support) They should have the ability to retrieve media objects from a local storage device in a good manner. (Storage support) They should have the ability to take the response generated by a query and develop a presentation of that response in terms of audio-visual media and have the ability to deliver this presentation. (Presentation and delivery support) == Issues and challenges == Multimedia data consists of a variety of media formats or file representations including TIFF, BMP, PPT, IVUE, FPX, JPEG, MPEG, AVI, MID, WAV, DOC, GIF, EPS, PNG, etc. Because of restrictions on the conversion from one format to the other, the use of the data in a specific format has been limited as well. Usually, the data size of multimedia is large such as video; therefore, multimedia data often require a large storage. Multimedia database consume a lot of processing time, as well as bandwidth. Some multimedia data types such as video, audio, and animation sequences have temporal requirements that have implications on their storage, manipulation and presentation, but images, video and graphics data have special constraints in terms of their content. == Application areas == Examples of multimedia database application areas: Digital Libraries News-on-Demand Video-on-Demand Music database Geographic Information Systems (GIS) Telemedicine

  Read more →
• 

  Affinity (software)

  Affinity is a graphics editor developed by Serif, a subsidiary of Canva. It is simultaneously a vector graphics editor, a raster graphics editor and a desktop publishing application. It was first released in 2025 as a successor to Serif's Affinity Designer, Affinity Photo and Affinity Publisher, uniting the three editors into one application. While the previous versions competed individually against Adobe's Illustrator, Photoshop, and InDesign, Affinity 3.0 integrates their functionality into a single application. It uses a freemium model monetized by AI features exclusive to Canva Pro subscribers. == Functionality == Affinity is divided into a number of workspaces ("studios"), which are equivalent to the previous suite of Affinity applications: "vector" for vector graphics (Designer), "pixel" for raster editing (Photo), and "layout" for desktop publishing (Publisher). Additionally, it introduces the ability to create custom workspaces. The application supports real-time previews and non-destructive editing, which are based on GPU acceleration. Supported file formats include Adobe Photoshop, InDesign and Illustrator files, PDF, SVG, and TIFF, as well as a custom .af file format. === Vector editing === === Raster editing === Affinity includes photo editing tools including adjustments, masks, blend modes, batch processing, and retouching facilities. Additionally, the application can develop RAW files, similar to Adobe Lightroom. === Desktop publishing === Publishing features include master pages, text styles, and advanced typography. === AI features === The application supports Canva's existing AI features, such as background removal and generative fill. This requires a Canva subscription. == Development == === Background and acquisition (2014–2024) === Serif launched the original Affinity suite starting with Affinity Designer in 2014, followed by Photo (2015) and Publisher (2019). The software gained popularity for its one-time purchase model, contrasting with Adobe's subscription-based Creative Cloud. In November 2022, Serif released Version 2 of the suite, introducing a "Universal License" that covered all three apps across all platforms. In March 2024, Canva acquired Serif for approximately A$580 million (£300 million). Following user backlash regarding a potential shift to subscriptions, Canva and Serif issued a joint "Pledge" committing to four key principles: fair pricing, no mandatory subscriptions, perpetual licenses for existing products, and continued development of Affinity as a standalone suite. === Unified release (2025) === In September 2025, Serif pulled all existing versions of Affinity Designer, Affinity Photo and Affinity Publisher from sale ahead an upcoming announcement on 30 October; also ahead of the announcement, the iPadOS versions of the Affinity suite became free on App Store. During a "Creative Freedom" keynote on 30 October 2025, Canva released a new version now simply branded as "Affinity" (also known as "Affinity by Canva"), and referred to internally as version 3.0. Version 3 drops the separate applications and integrates their functionality into a singular application, and adds the ability to export directly to the Canva platform. It also adds a Canva AI studio, including background removal, "Expand & Edit", and generative fill. As of version 3, Affinity has switched to a freemium model; it is now available at no charge to users, although access to Canva AI features are locked behind the existing Canva Pro subscription service. Serif stated that the perpetually-licensed version 2 will remain available to existing owners, although it will no longer be actively maintained. The new version is currently available for macOS and Windows only, with an iPadOS version to be released soon. == Reception == The change in business model by Canva in 2025 was met with mixed reception, including concerns about its incorporation of AI features. Some users were concerned that their projects would be used for machine learning purposes, or that future versions would suffer from a lack of maintenance or become adware. Additionally, some felt it turned Affinity into fundamentally subscription-based software, given the prevalence of these features in professional contexts. Affinity publicly stated on social media that it would remain "free forever", users' projects would not be used to train AI models, and that "Canva has built a sustainable business model that allows this kind of generosity. And when more professionals use Affinity, Canva can sell more seats into businesses."

  Read more →
• 

  Speech recognition

  Speech recognition (automatic speech recognition (ASR), computer speech recognition, or speech-to-text (STT)) is a sub-field of computational linguistics concerned with methods and technologies that translate spoken language into text or other interpretable forms. Speech recognition applications include voice user interfaces, where the user speaks to a device, which "listens" and processes the audio. Common voice applications include interpreting commands for calling, call routing, home automation, and aircraft control. These applications are called direct voice input. Productivity applications include searching audio recordings, creating transcripts, and dictation. Speech recognition can be used to analyse speaker characteristics, such as identifying native language using pronunciation assessment. Voice recognition (speaker identification) refers to identifying the speaker, rather than speech contents. Recognizing the speaker can simplify the task of translating speech in systems trained on a specific person's voice. It can also be used to authenticate the speaker as part of a security process. == History == Applications for speech recognition developed over many decades, with progress accelerated due to advances in deep learning and the use of big data. These advances are reflected in an increase in academic papers, and greater system adoption. Key areas of growth include vocabulary size, more accurate recognition for unfamiliar speakers (speaker independence), and faster processing speed. === Pre-1970 === 1952 – Bell Labs researchers, Stephen Balashek, R. Biddulph, and K. H. Davis, built Audrey for single-speaker digit recognition. Their system located the formants in the power spectrum of each utterance. 1960 – Gunnar Fant developed and published the source–filter model of speech production. 1962 – IBM's 16-word "Shoebox" machine's speech recognition debuted at the 1962 World's Fair. 1966 – Linear predictive coding, a speech coding method, was proposed by Fumitada Itakura of Nagoya University and Shuzo Saito of Nippon Telegraph and Telephone. 1969 – Funding at Bell Labs came to a halt for several years after the company's head engineer, John R. Pierce, wrote an open letter criticizing speech recognition research. This defunding lasted until Pierce retired and James L. Flanagan took over. Raj Reddy was the first person to work on continuous speech recognition, as a graduate student at Stanford University in the late 1960s. Previous systems required users to pause after each word. Reddy's system issued spoken commands for playing chess. Around this time, Soviet researchers invented the dynamic time warping (DTW) algorithm and used it to create a recognizer capable of operating on a 200-word vocabulary. DTW processed speech by dividing it into short frames (e.g. 10 ms segments) and treating each frame as a unit. Speaker independence, however, remained unsolved. === 1970–1990 === 1971 – DARPA funded a five-year speech recognition research project, Speech Understanding Research, seeking a minimum vocabulary size of 1,000 words. The project considered speech understanding a key to achieving progress in speech recognition, which was later disproved. BBN, IBM, Carnegie Mellon (CMU), and Stanford Research Institute participated. 1972 – The IEEE Acoustics, Speech, and Signal Processing group held a conference in Newton, Massachusetts. 1976 – The first ICASSP was held in Philadelphia, which became a major venue for publishing on speech recognition. During the late 1960s, Leonard Baum developed the mathematics of Markov chains at the Institute for Defense Analysis. A decade later, at CMU, Raj Reddy's students James Baker and Janet M. Baker began using the hidden Markov model (HMM) for speech recognition. James Baker had learned about HMMs while at the Institute for Defense Analysis. HMMs enabled researchers to combine sources of knowledge, such as acoustics, language, and syntax, in a unified probabilistic model. By the mid-1980s, Fred Jelinek's team at IBM created a voice-activated typewriter called Tangora, which could handle a 20,000-word vocabulary. Jelinek's statistical approach placed less emphasis on emulating human brain processes in favor of statistical modelling. (Jelinek's group independently discovered the application of HMMs to speech.) This was controversial among linguists since HMMs are too simplistic to account for many features of human languages. However, the HMM proved to be a highly useful way for modelling speech and replaced dynamic time warping as the dominant speech recognition algorithm in the 1980s. 1982 – Dragon Systems, founded by James and Janet M. Baker, was one of IBM's few competitors. === Practical speech recognition === The 1980s also saw the introduction of the n-gram language model. 1987 – The back-off model enabled language models to use multiple-length n-grams, and CSELT used HMM to recognize languages (in software and hardware, e.g. RIPAC). At the end of the DARPA program in 1976, the best computer available to researchers was the PDP-10 with 4 MB of RAM. It could take up to 100 minutes to decode 30 seconds of speech. Practical products included: 1984 – the Apricot Portable was released with up to 4096 words support, of which only 64 could be held in RAM at a time. 1987 – a recognizer from Kurzweil Applied Intelligence 1990 – Dragon Dictate, a consumer product released in 1990. AT&T deployed the Voice Recognition Call Processing service in 1992 to route telephone calls without a human operator. The technology was developed by Lawrence Rabiner and others at Bell Labs. By the early 1990s, the vocabulary of the typical commercial speech recognition system had exceeded the average human vocabulary. Reddy's former student, Xuedong Huang, developed the Sphinx-II system at CMU. Sphinx-II was the first to do speaker-independent, large vocabulary, continuous speech recognition, and it won DARPA's 1992 evaluation. Handling continuous speech with a large vocabulary was a major milestone. Huang later founded the speech recognition group at Microsoft in 1993. Reddy's student Kai-Fu Lee joined Apple, where, in 1992, he helped develop the Casper speech interface prototype. Lernout & Hauspie, a Belgium-based speech recognition company, acquired other companies, including Kurzweil Applied Intelligence in 1997 and Dragon Systems in 2000. L&H was used in Windows XP. L&H was an industry leader until an accounting scandal destroyed it in 2001. L&H speech technology was bought by ScanSoft, which became Nuance in 2005. Apple licensed Nuance software for its digital assistant Siri. ==== 2000s ==== In the 2000s, DARPA sponsored two speech recognition programs: Effective Affordable Reusable Speech-to-Text (EARS) in 2002, followed by Global Autonomous Language Exploitation (GALE) in 2005. Four teams participated in EARS: IBM; a team led by BBN with LIMSI and the University of Pittsburgh; Cambridge University; and a team composed of ICSI, SRI, and the University of Washington. EARS funded the collection of the Switchboard telephone speech corpus, which contained 260 hours of recorded conversations from over 500 speakers. The GALE program focused on Arabic and Mandarin broadcast news. Google's first effort at speech recognition came in 2007 after recruiting Nuance researchers. Its first product, GOOG-411, was a telephone-based directory service. Since at least 2006, the U.S. National Security Agency has employed keyword spotting, allowing analysts to index large volumes of recorded conversations and identify speech containing "interesting" keywords. Other government research programs focused on intelligence applications, such as DARPA's EARS program and IARPA's Babel program. In the early 2000s, speech recognition was dominated by hidden Markov models combined with feed-forward artificial neural networks (ANN). Later, speech recognition was taken over by long short-term memory (LSTM), a recurrent neural network (RNN) published by Sepp Hochreiter & Jürgen Schmidhuber in 1997. LSTM RNNs avoid the vanishing gradient problem and can learn "Very Deep Learning" tasks that require memories of events that happened thousands of discrete time steps earlier, which is important for speech. Around 2007, LSTMs trained with Connectionist Temporal Classification (CTC) began to outperform. In 2015, Google reported a 49 percent error‑rate reduction in its speech recognition via CTC‑trained LSTM. Transformers, a type of neural network based solely on attention, were adopted in computer vision and language modelling, and then to speech recognition. Deep feed-forward (non-recurrent) networks for acoustic modelling were introduced in 2009 by Geoffrey Hinton and his students at the University of Toronto, and by Li Deng and colleagues at Microsoft Research. In contrast to the prioer incremental improvements, deep learning decreased error rates by 30%. Both shallow and deep forms (e.g., recurrent nets) of ANNs had been explored since the 1980s. Howev

  Read more →