AI Chatbot Login

AI Chatbot Login — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Cone tracing

  Cone tracing and beam tracing are a derivative of the ray tracing algorithm that replaces rays, which have no thickness, with thick rays. == Principles == In ray tracing, rays are often modeled as geometric ray with no thickness to perform efficient geometric queries such as a ray-triangle intersection. From a physics of light transport point of view, however, this is an inaccurate model provided the pixel on the sensor plane has non-zero area. In the simplified pinhole camera optics model, the energy reaching the pixel comes from the integral of radiance from the solid angle by which the sensor pixel sees the scene through the pinhole at the focal plane. This yields the key notion of pixel footprint on surfaces or in the texture space, which is the back projection of the pixel on to the scene. Note that this approach can also represent a lens-based camera and thus depth of field effects, using a cone whose cross-section decreases from the lens size to zero at the focal plane, and then increases. Real optical system do not focus on exact points because of diffraction and imperfections. This can be modeled with a point spread function (PSF) weighted within a solid angle larger than the pixel. From a signal processing point of view, ignoring the point spread function and approximating the integral of radiance with a single, central sample (through a ray with no thickness) can lead to strong aliasing because the "projected geometric signal" has very high frequencies exceeding the Nyquist-Shannon maximal frequency that can be represented using the uniform pixel sampling rate. The physically based image formation model can be approximated by the convolution with the point spread function assuming the function is shift-invariant and linear. In practice, techniques such as multisample anti-aliasing estimate this cone-based model by oversampling the signal and then performing a convolution (the reconstruction filter). The backprojected cone footprint onto the scene can also be used to directly pre-filter the geometry and textures of the scene. Note that contrary to intuition, the reconstruction filter should not be the pixel footprint (as the pinhole camera model would suggest), since a box filter has poor spectral properties. Conversely, the ideal sinc function is not practical, having infinite support with possibly negative values which often creates ringing artifacts due to the Gibbs phenomenon. A Gaussian or a Lanczos filter are considered good compromises. == Computer graphics models == Cone and Beam early papers rely on different simplifications: the first considers a circular section and treats the intersection with various possible shapes. The second treats an accurate pyramidal beam through the pixel and along a complex path, but it only works for polyhedrical shapes. Cone tracing solves certain problems related to sampling and aliasing, which can plague conventional ray tracing. However, cone tracing creates a host of problems of its own. For example, just intersecting a cone with scene geometry leads to an enormous variety of possible results. For this reason, cone tracing has remained mostly unpopular. In recent years, increases in computer speed have made Monte Carlo algorithms like distributed ray tracing - i.e. stochastic explicit integration of the pixel - much more used than cone tracing because the results are exact provided enough samples are used. But the convergence is so slow that even in the context of off-line rendering a huge amount of time can be required to avoid noise. Differential cone-tracing, considering a differential angular neighborhood around a ray, avoids the complexity of exact geometry intersection but requires a LOD representation of the geometry and appearance of the objects. MIPmapping is an approximation of it limited to the integration of the surface texture within a cone footprint. Differential ray-tracing extends it to textured surfaces viewed through complex paths of cones reflected or refracted by curved surfaces. Raymarching methods over signed distance fields (SDFs) naturally allow easy use of cone-like tracing, at zero additional cost to the tracing, and both speeds up tracing and improves quality. Voxel cone tracing is a real-time algorithm that uses a hierarchical voxel representation of scene geometry, such as a sparse voxel octree, to support fast cone tracing for indirect illumination. This approach allows for the approximation of effects like glossy reflections and ambient occlusion at interactive framerates without the need for precomputation.

  Read more →
• 

  Adversarial machine learning

  Adversarial machine learning is the study of the attacks on machine learning algorithms, and of the defenses against such attacks. Machine learning techniques are mostly designed to work on specific problem sets, under the assumption that the training and test data are generated from the same statistical distribution (IID). However, this assumption is often violated in practical high-stake applications, where users may intentionally supply fabricated data that violates the statistical assumption. Most common attacks in adversarial machine learning include evasion attacks, data poisoning attacks, Byzantine attacks and model extraction. == History == At the MIT Spam Conference in January 2004, John Graham-Cumming showed that a machine-learning spam filter could be used to defeat another machine-learning spam filter by automatically learning which words to add to a spam email to get the email classified as not spam. In 2004, Nilesh Dalvi and others noted that linear classifiers used in spam filters could be defeated by simple "evasion attacks" as spammers inserted "good words" into their spam emails. (Around 2007, some spammers added random noise to fuzz words within "image spam" in order to defeat OCR-based filters.) In 2006, Marco Barreno and others published "Can Machine Learning Be Secure?", outlining a broad taxonomy of attacks. As late as 2013 many researchers continued to hope that non-linear classifiers (such as support vector machines and neural networks) might be robust to adversaries, until Battista Biggio and others demonstrated the first gradient-based attacks on such machine-learning models (2012–2013). In 2012, deep neural networks began to dominate computer vision problems; starting in 2014, Christian Szegedy and others demonstrated that deep neural networks could be fooled by adversaries, again using a gradient-based attack to craft adversarial perturbations. Further work would show that adversarial attacks are harder to produce in uncontrolled environments, due to the different environmental constraints that cancel out the effect of noise. For example, any small rotation or slight illumination on an adversarial image can destroy the adversariality. In addition, researchers such as Google Brain's Nick Frosst point out that it is much easier to make self-driving cars miss stop signs by physically removing the sign itself, rather than creating adversarial examples. Frosst also believes that the adversarial machine learning community incorrectly assumes models trained on a certain data distribution will also perform well on a completely different data distribution. He suggests that a new approach to machine learning should be explored, and is currently working on a unique neural network that has characteristics more similar to human perception than state-of-the-art approaches. While adversarial machine learning continues to be heavily rooted in academia, large tech companies such as Google, Microsoft, and IBM have begun curating documentation and open source code bases to allow others to concretely assess the robustness of machine learning models and minimize the risk of adversarial attacks. === Examples === Examples include attacks in spam filtering, where spam messages are obfuscated through the misspelling of "bad" words or the insertion of "good" words; attacks in computer security, such as obfuscating malware code within network packets or modifying the characteristics of a network flow to mislead intrusion detection; attacks in biometric recognition where fake biometric traits may be exploited to impersonate a legitimate user; or to compromise users' template galleries that adapt to updated traits over time. Researchers showed that by changing only one-pixel it was possible to fool deep learning algorithms. Others 3-D printed a toy turtle with a texture engineered to make Google's object detection AI classify it as a rifle regardless of the angle from which the turtle was viewed. Creating the turtle required only low-cost commercially available 3-D printing technology. A machine-tweaked image of a dog was shown to look like a cat to both computers and humans. A 2019 study reported that humans can guess how machines will classify adversarial images. Researchers discovered methods for perturbing the appearance of a stop sign such that an autonomous vehicle classified it as a merge or speed limit sign. A data poisoning filter called Nightshade was released in 2023 by researchers at the University of Chicago. It was created for use by visual artists to put on their artwork to corrupt the data set of text-to-image models, which usually scrape their data from the internet without the consent of the image creator. McAfee attacked Tesla's former Mobileye system, fooling it into driving 50 mph over the speed limit, simply by adding a two-inch strip of black tape to a speed limit sign. Adversarial patterns on glasses or clothing designed to deceive facial-recognition systems or license-plate readers, have led to a niche industry of "stealth streetwear". An adversarial attack on a neural network can allow an attacker to inject algorithms into the target system. Researchers can also create adversarial audio inputs to disguise commands to intelligent assistants in benign-seeming audio; a parallel literature explores human perception of such stimuli. Clustering algorithms are used in security applications. Malware and computer virus analysis aims to identify malware families, and to generate specific detection signatures. In the context of malware detection, researchers have proposed methods for adversarial malware generation that automatically craft binaries to evade learning-based detectors while preserving malicious functionality. Optimization-based attacks such as GAMMA use genetic algorithms to inject benign content (for example, padding or new PE sections) into Windows executables, framing evasion as a constrained optimization problem that balances misclassification success with the size of the injected payload and showing transferability to commercial antivirus products. Complementary work uses generative adversarial networks (GANs) to learn feature-space perturbations that cause malware to be classified as benign; Mal-LSGAN, for instance, replaces the standard GAN loss with a least-squares objective and modified activation functions to improve training stability and produce adversarial malware examples that substantially reduce true positive rates across multiple detectors. == Challenges in applying machine learning to security == Researchers have observed that the constraints under which machine-learning techniques function in the security domain are different from those of common benchmark domains. Security data may change over time, include mislabeled samples, or reflect adversarial behavior, which complicates evaluation and reproducibility. === Data collection issues === Security datasets vary across formats, including binaries, network traces, and log files. Studies have reported that the process of converting these sources into features can introduce bias or inconsistencies. In addition, time-based leakage can occur when related malware samples are not properly separated across training and testing splits, which may lead to overly optimistic results. === Labeling and ground truth challenges === Malware labels are often unstable because different antivirus engines may classify the same sample in conflicting ways. Ceschin et al. note that families may be renamed or reorganized over time, causing further discrepancies in ground truth and reducing the reliability of benchmarks. === Concept drift === Because malware creators continuously adapt their techniques, the statistical properties of malicious samples also change. This form of concept drift has been widely documented and may reduce model performance unless systems are updated regularly or incorporate mechanisms for incremental learning. === Feature robustness === Researchers differentiate between features that can be easily manipulated and those that are more resistant to modification. For example, simple static attributes, such as header fields, may be altered by attackers, while structural features, such as control-flow graphs, are generally more stable but computationally expensive to extract. === Class imbalance === In realistic deployment environments, the proportion of malicious samples can be extremely low, ranging from 0.01% to 2% of total data. This unbalanced distribution causes models to develop a bias towards the majority class, achieving high accuracy but failing to identify malicious samples. Prior approaches to this problem have included both data-level solutions and sequence-specific models. Methods like n-gram and Long Short-Term Memory (LSTM) networks can model sequential data, but their performance has been shown to decline significantly when malware samples are realistically proportioned in the training set, demonstrating the limitations in

  Read more →
• 

  TensorFlow Hub

  TensorFlow Hub (also styled TF Hub) is an open-source machine learning library and online repository that provides TensorFlow model components, called modules. It is maintained by Google as part of the TensorFlow ecosystem and allows developers to discover, publish, and reuse pretrained models for tasks such as computer vision, natural language processing, and transfer learning. == Overview == TensorFlow Hub provides a central platform where developers and researchers can access pre-trained models and integrate them directly into TensorFlow workflows. Each module encapsulates a computation graph and its trained weights, with standardized input and output signatures. Modules can be loaded using the hub.load() function or through Keras integration via hub.KerasLayer, enabling users to perform transfer learning or feature extraction. == History == TensorFlow Hub was announced by Google in March 2018, with the first public version released shortly after. Its introduction coincided with the growing adoption of transfer learning techniques and the need for standardized model packaging. Over time, the hub expanded to include models such as the BERT family, MobileNet, EfficientNet, and the Universal Sentence Encoder. In 2020, research on “Regret selection in TensorFlow Hub” explored the problem of identifying optimal models for downstream tasks given a large repository of alternatives. == Applications == TensorFlow Hub hosts a variety of models across machine learning domains: Natural language processing: BERT, ALBERT language model, and Universal Sentence Encoder. Computer vision: ResNet, Inception (deep learning), MobileNet, EfficientNet. Speech and audio: spectrogram feature extractors and automatic speech recognition models. Multilingual embeddings: cross-lingual and sentence-level representations for machine translation and semantic similarity. Modules are widely used in education, academic research, and industry for prototyping and production deployment.

  Read more →
• 

  Computational intelligence

  In computer science, computational intelligence (CI) refers to concepts, paradigms, algorithms and implementations of systems that are designed to show "intelligent" behavior in complex and changing environments. These systems are aimed at mastering complex tasks in a wide variety of technical or commercial areas and offer solutions that recognize and interpret patterns, control processes, support decision-making or autonomously manoeuvre vehicles or robots in unknown environments, among other things. These concepts and paradigms are characterized by the ability to learn or adapt to new situations, to generalize, to abstract, to discover and associate. Nature-analog or nature-inspired methods play a key role in this. CI approaches primarily address those complex real-world problems for which traditional or mathematical modeling is not appropriate for various reasons: the processes cannot be described exactly with complete knowledge, the processes are too complex for mathematical reasoning, they contain some uncertainties during the process, such as unforeseen changes in the environment or in the process itself, or the processes are simply stochastic in nature. Thus, CI techniques are properly aimed at processes that are ill-defined, complex, nonlinear, time-varying and/or stochastic. A recent definition of the IEEE Computational Intelligence Societey describes CI as the theory, design, application and development of biologically and linguistically motivated computational paradigms. Traditionally the three main pillars of CI have been Neural Networks, Fuzzy Systems and Evolutionary Computation. ... CI is an evolving field and at present in addition to the three main constituents, it encompasses computing paradigms like ambient intelligence, artificial life, cultural learning, artificial endocrine networks, social reasoning, and artificial hormone networks. ... Over the last few years there has been an explosion of research on Deep Learning, in particular deep convolutional neural networks. Nowadays, deep learning has become the core method for artificial intelligence. In fact, some of the most successful AI systems are based on CI. However, as CI is an emerging and developing field there is no final definition of CI, especially in terms of the list of concepts and paradigms that belong to it. The general requirements for the development of an “intelligent system” are ultimately always the same, namely the simulation of intelligent thinking and action in a specific area of application. To do this, the knowledge about this area must be represented in a model so that it can be processed. The quality of the resulting system depends largely on how well the model was chosen in the development process. Sometimes data-driven methods are suitable for finding a good model and sometimes logic-based knowledge representations deliver better results. Hybrid models are usually used in real applications. According to actual textbooks, the following methods and paradigms, which largely complement each other, can be regarded as parts of CI: Fuzzy systems Neural networks and, in particular, convolutional neural networks Evolutionary computation and, in particular, multi-objective evolutionary optimization Swarm intelligence Bayesian networks Artificial immune systems Learning theory Probabilistic methods == Relationship between hard and soft computing and artificial and computational intelligence == Artificial intelligence (AI) is used in the media, but also by some of the scientists involved, as a kind of umbrella term for the various techniques associated with it or with CI. Craenen and Eiben state that attempts to define or at least describe CI can usually be assigned to one or more of the following groups: "Relative definition” comparing CI to AI Conceptual treatment of key notions and their roles in CI Listing of the (established) areas that belong to it The relationship between CI and AI has been a frequently discussed topic during the development of CI. While the above list implies that they are synonyms, the vast majority of AI/CI researchers working on the subject consider them to be distinct fields, where either CI is an alternative to AI AI includes CI CI includes AI The view of the first of the above three points goes back to Zadeh, the founder of the fuzzy set theory, who differentiated machine intelligence into hard and soft computing techniques, which are used in artificial intelligence on the one hand and computational intelligence on the other. In hard computing (HC) and traditional AI (e.g. expert systems), inaccuracy and uncertainty are undesirable characteristics of a system, while soft computing (SC) and thus CI focus on dealing with these characteristics. The adjacent figure illustrates this view and lists the most important CI techniques. Another frequently mentioned distinguishing feature is the representation of information in symbolic form in AI and in sub-symbolic form in CI techniques. Hard computing is a conventional computing method based on the principles of certainty and accuracy and it is deterministic. It requires a precisely stated analytical model of the task to be processed and a prewritten program, i.e. a fixed set of instructions. The models used are based on Boolean logic (also called crisp logic), where e.g. an element can be either a member of a set or not and there is nothing in between. When applied to real-world tasks, systems based on HC result in specific control actions defined by a mathematical model or algorithm. If an unforeseen situation occurs that is not included in the model or algorithm used, the action will most likely fail. Soft computing, on the other hand, is based on the fact that the human mind is capable of storing information and processing it in a goal-oriented way, even if it is imprecise and lacks certainty. SC is based on the model of the human brain with probabilistic thinking, fuzzy logic and multi-valued logic. Soft computing can process a wealth of data and perform a large number of computations, which may not be exact, in parallel. For hard problems for which no satisfying exact solutions based on HC are available, SC methods can be applied successfully. SC methods are usually stochastic in nature i.e., they are a randomly defined processes that can be analyzed statistically but not with precision. Up to now, the results of some CI methods, such as deep learning, cannot be verified and it is also not clear what they are based on. This problem represents an important scientific issue for the future. AI and CI are catchy terms, but they are also so similar that they can be confused. The meaning of both terms has developed and changed over a long period of time, with AI being used first. Bezdek describes this impressively and concludes that such buzzwords are frequently used and hyped by the scientific community, science management and (science) journalism. Not least because AI and biological intelligence are emotionally charged terms and it is still difficult to find a generally accepted definition for the basic term intelligence. == History == In 1950, Alan Turing, one of the founding fathers of computer science, developed a test for computer intelligence known as the Turing test. In this test, a person can ask questions via a keyboard and a monitor without knowing whether his counterpart is a human or a computer. A computer is considered intelligent if the interrogator cannot distinguish the computer from a human. This illustrates the discussion about intelligent computers at the beginning of the computer age. The term Computational Intelligence was first used as the title of the journal of the same name in 1985 and later by the IEEE Neural Networks Council (NNC), which was founded 1989 by a group of researchers interested in the development of biological and artificial neural networks. On November 21, 2001, the NNC became the IEEE Neural Networks Society, to become the IEEE Computational Intelligence Society two years later by including new areas of interest such as fuzzy systems and evolutionary computation. The NNC helped organize the first IEEE World Congress on Computational Intelligence in Orlando, Florida in 1994. On this conference the first clear definition of Computational Intelligence was introduced by Bezdek: A system is computationally intelligent when it: deals with only numerical (low-level) data, has pattern-recognition components, does not use knowledge in the AI sense; and additionally when it (begins to) exhibit (1) computational adaptivity; (2) computational fault tolerance; (3) speed approaching human-like turnaround and (4) error rates that approximate human performance. Today, with machine learning and deep learning in particular utilizing a breadth of supervised, unsupervised, and reinforcement learning approaches, the CI landscape has been greatly enhanced, with novell intelligent approaches. == The main algorithmic approaches of CI and their applicati

  Read more →
• 

  Inverse depth parametrization

  In computer vision, the inverse depth parametrization is a parametrization used in methods for 3D reconstruction from multiple images such as simultaneous localization and mapping (SLAM). Given a point p {\displaystyle \mathbf {p} } in 3D space observed by a monocular pinhole camera from multiple views, the inverse depth parametrization of the point's position is a 6D vector that encodes the optical centre of the camera c 0 {\displaystyle \mathbf {c} _{0}} when in first observed the point, and the position of the point along the ray passing through p {\displaystyle \mathbf {p} } and c 0 {\displaystyle \mathbf {c} _{0}} . Inverse depth parametrization generally improves numerical stability and allows to represent points with zero parallax. Moreover, the error associated to the observation of the point's position can be modelled with a Gaussian distribution when expressed in inverse depth. This is an important property required to apply methods, such as Kalman filters, that assume normality of the measurement error distribution. The major drawback is the larger memory consumption, since the dimensionality of the point's representation is doubled. == Definition == Given 3D point p = ( x , y , z ) {\displaystyle \mathbf {p} =(x,y,z)} with world coordinates in a reference frame ( e 1 , e 2 , e 3 ) {\displaystyle (e_{1},e_{2},e_{3})} , observed from different views, the inverse depth parametrization y {\displaystyle \mathbf {y} } of p {\displaystyle \mathbf {p} } is given by: y = ( x 0 , y 0 , z 0 , θ , ϕ , ρ ) {\displaystyle \mathbf {y} =(x_{0},y_{0},z_{0},\theta ,\phi ,\rho )} where the first five components encode the camera pose in the first observation of the point, being c 0 = ( x 0 , y 0 , z 0 ) {\displaystyle \mathbf {c_{0}} =(x_{0},y_{0},z_{0})} the optical centre, ϕ {\displaystyle \phi } the azimuth, θ {\displaystyle \theta } the elevation angle, and ρ = 1 ‖ p − c 0 ‖ {\displaystyle \rho ={\frac {1}{\left\Vert \mathbf {p} -\mathbf {c} _{0}\right\Vert }}} the inverse depth of p {\displaystyle p} at the first observation.

  Read more →
• 

  Multi-task learning

  Multi-task learning (MTL) is a subfield of machine learning in which multiple learning tasks are solved at the same time, while exploiting commonalities and differences across tasks. This can result in improved learning efficiency and prediction accuracy for the task-specific models, when compared to training the models separately. Inherently, Multi-task learning is a multi-objective optimization problem having trade-offs between different tasks. Early versions of MTL were called "hints". In a widely cited 1997 paper, Rich Caruana gave the following characterization:Multitask Learning is an approach to inductive transfer that improves generalization by using the domain information contained in the training signals of related tasks as an inductive bias. It does this by learning tasks in parallel while using a shared representation; what is learned for each task can help other tasks be learned better. In the classification context, MTL aims to improve the performance of multiple classification tasks by learning them jointly. One example is a spam-filter, which can be treated as distinct but related classification tasks across different users. To make this more concrete, consider that different people have different distributions of features which distinguish spam emails from legitimate ones, for example an English speaker may find that all emails in Russian are spam, not so for Russian speakers. Yet there is a definite commonality in this classification task across users, for example one common feature might be text related to money transfer. Solving each user's spam classification problem jointly via MTL can let the solutions inform each other and improve performance. Further examples of settings for MTL include multiclass classification and multi-label classification. Multi-task learning works because regularization induced by requiring an algorithm to perform well on a related task can be superior to regularization that prevents overfitting by penalizing all complexity uniformly. One situation where MTL may be particularly helpful is if the tasks share significant commonalities and are generally slightly under sampled. However, as discussed below, MTL has also been shown to be beneficial for learning unrelated tasks. == Methods == The key challenge in multi-task learning, is how to combine learning signals from multiple tasks into a single model. This may strongly depend on how well different task agree with each other, or contradict each other. There are several ways to address this challenge: === Task grouping and overlap === Within the MTL paradigm, information can be shared across some or all of the tasks. Depending on the structure of task relatedness, one may want to share information selectively across the tasks. For example, tasks may be grouped or exist in a hierarchy, or be related according to some general metric. Suppose, as developed more formally below, that the parameter vector modeling each task is a linear combination of some underlying basis. Similarity in terms of this basis can indicate the relatedness of the tasks. For example, with sparsity, overlap of nonzero coefficients across tasks indicates commonality. A task grouping then corresponds to those tasks lying in a subspace generated by some subset of basis elements, where tasks in different groups may be disjoint or overlap arbitrarily in terms of their bases. Task relatedness can be imposed a priori or learned from the data. Hierarchical task relatedness can also be exploited implicitly without assuming a priori knowledge or learning relations explicitly. For example, the explicit learning of sample relevance across tasks can be done to guarantee the effectiveness of joint learning across multiple domains. === Exploiting unrelated tasks: Auxiliary learning === In auxiliary learning, one attempts learning a group of principal tasks using a group of auxiliary tasks, unrelated to the principal ones. With the right unrelated tasks, joint learning of unrelated tasks which use the same input data have been shown to be beneficial, and provide significant improvement over standard MTL. The reason is that prior knowledge about task relatedness can lead to sparser and more informative representations for each task grouping, essentially by screening out idiosyncrasies of the data distribution. It has been proposed to build on a prior multitask methodology by favoring a shared low-dimensional representation within each task grouping, and imposing a penalty on tasks from different groups which encourages the two representations to be orthogonal. Learning with auxiliary unrelated tasks poses two major challenges: Finding useful auxiliary tasks and combining losses of all tasks in a useful way. Some methods can learn these from data together with the training process, and combine tasks efficiently. === Transfer of knowledge === Related to multi-task learning is the concept of knowledge transfer. Whereas traditional multi-task learning implies that a shared representation is developed concurrently across tasks, transfer of knowledge implies a sequentially shared representation. Large scale machine learning projects such as the deep convolutional neural network GoogLeNet, an image-based object classifier, can develop robust representations which may be useful to further algorithms learning related tasks. For example, the pre-trained model can be used as a feature extractor to perform pre-processing for another learning algorithm. Or the pre-trained model can be used to initialize a model with similar architecture which is then fine-tuned to learn a different classification task. === Multiple non-stationary tasks === Traditionally Multi-task learning and transfer of knowledge are applied to stationary learning settings. Their extension to non-stationary environments is termed Group online adaptive learning (GOAL). Sharing information could be particularly useful if learners operate in continuously changing environments, because a learner could benefit from previous experience of another learner to quickly adapt to their new environment. Such group-adaptive learning has numerous applications, from predicting financial time-series, through content recommendation systems, to visual understanding for adaptive autonomous agents. === Multi-task optimization === Multi-task optimization focuses on solving optimizing the whole process. The paradigm has been inspired by the well-established concepts of transfer learning and multi-task learning in predictive analytics. The key motivation behind multi-task optimization is that if optimization tasks are related to each other in terms of their optimal solutions or the general characteristics of their function landscapes, the search progress can be transferred to substantially accelerate the search on the other. The success of the paradigm is not necessarily limited to one-way knowledge transfers from simpler to more complex tasks. In practice an attempt is to intentionally solve a more difficult task that may unintentionally solve several smaller problems. There is a direct relationship between multitask optimization and multi-objective optimization. In some cases, the simultaneous training of seemingly related tasks may hinder performance compared to single-task models. Commonly, MTL models employ task-specific modules on top of a joint feature representation obtained using a shared module. Since this joint representation must capture useful features across all tasks, MTL may hinder individual task performance if the different tasks seek conflicting representation, i.e., the gradients of different tasks point to opposing directions or differ significantly in magnitude. This phenomenon is commonly referred to as negative transfer. To mitigate this issue, various MTL optimization methods have been proposed. It has been reported that meta-knowledge transfer could help avoid negative transfer.Besides, the per-task gradients are combined into a joint update direction through various aggregation algorithms or heuristics. There are several common approaches for multi-task optimization: Bayesian optimization, evolutionary computation, and approaches based on Game theory. ==== Multi-task Bayesian optimization ==== Multi-task Bayesian optimization is a modern model-based approach that leverages the concept of knowledge transfer to speed up the automatic hyperparameter optimization process of machine learning algorithms. The method builds a multi-task Gaussian process model on the data originating from different searches progressing in tandem. The captured inter-task dependencies are thereafter utilized to better inform the subsequent sampling of candidate solutions in respective search spaces. ==== Evolutionary multi-tasking ==== Evolutionary multi-tasking has been explored as a means of exploiting the implicit parallelism of population-based search algorithms to simultaneously progress multiple distinct optimization tasks. By mapping all task

  Read more →
• 

  Reciprocal human machine learning

  Reciprocal Human Machine Learning (RHML) is an interdisciplinary approach to designing human-AI interaction systems. RHML aims to enable continual learning between humans and machine learning models by having them learn from each other. This approach keeps the human expert "in the loop" to oversee and enhance machine learning performance and simultaneously support the human expert continue learning. == Background == RHML emerged in the context of the rise of big data analytics and artificial intelligence for intelligent tasks like sense-making and decision-making. As machine learning advanced to take on more roles, researchers realized fully autonomous systems had limitations and needed human guidance. RHML extends the concept of human-in-the-loop systems by promoting reciprocal learning. Humans learn from their interactions with machine learning models, staying up-to-date on evolving technology. The models also learn from human feedback and oversight. This amplification of learning on both sides is a key focus of RHML. The approach draws on theories of learning in dyads from education and psychology. It also builds on human-computer interaction and human-centered design principles. Implementing RHML requires developing specialized tools and interfaces tailored to the application == Applications == RHML has been explored across diverse domains including: Cybersecurity - Software to enable reciprocal learning between experts and AI models for social media threat detection. Organizational decision-making - RHML to structure collaboration between humans and AI systems. Workplace training - Using RHML for workers to learn from AI technologies on the job. Open science - Using human and AI collaboration to promote open science. Production and logistics - turning workers and intelligent machines into teammates. RHML maintains human oversight and control over AI systems, while enabling cutting-edge machine learning performance. This collaborative approach highlights the importance of keeping the human expert involved in the loop. An example of RHML in application is Free Spirit (AFSFCV), an open-source architecture first published in early 2025 as a whitepaper, proposing a visually structured approach to intent-based human–AI interaction.

  Read more →
• 

  AI Overviews

  AI Overviews is an artificial intelligence (AI) feature integrated into Google Search that produces AI-generated summaries of search results. The feature has been criticized for its inaccuracy and for reducing website traffic. == History and development == AI Overviews were first introduced as part of Google's Search Generative Experience (SGE), which was unveiled at the Google I/O conference in May 2023. In May 2024 at Google I/O 2024, the feature was rebranded as AI Overviews and launched in the United States. The introduction of AI Overviews was seen as a strategic move to compete with other generative AI advancements, including OpenAI's ChatGPT. By August 2024, AI Overviews was rolled out to several other countries, including the United Kingdom, India, Japan, Brazil, Mexico, and Indonesia, with support for multiple languages. In October 2024, Google expanded the feature globally, making it available in over 100 countries. In December 2024, Botify x Demandsphere released findings stating that when AI Overviews and featured snippets appear together on the search engine results page, they take up approximately 67.1% of the screen on desktop and 75.7% on mobile. Even if content is ranking in the #1 position, it may not be visible to consumers if other visual elements on the results page are more prominent. In March 2025, Google started testing an "AI Mode", where the search results page is AI-generated. The company was also considering adding advertisements to the AI Mode, as they already exist in AI Overviews. As of May 2025, AI Overviews are available in over 200 countries and territories and in more than 40 languages. As of March 2026, Google AI Overviews appear on more than 48% of total Google Search queries, compared to just 6.49% in the previous year (58% year-over-year growth). == Functionality == The AI Overviews feature uses large language models to generate summaries from web content. The overviews are designed to be concise, providing a snapshot of relevant information about the queried topic. Google allows users to adjust the language complexity in summaries, offering both simplified and detailed options. The overviews also include links to sources. According to a June 2025 study by Semrush, the most cited source is Quora, followed by Reddit. == Reception == The feature has faced criticism for inaccuracies, including instances where erroneous or nonsensical content was generated. Depending on what is searched for, the overview may also consist of hallucinated content, such as when searching for idioms that do not exist. In May 2024, Google temporarily restricted the AI tool after it provided suggestions that were seen as nonsensical and harmful, such as telling users to eat rocks or apply glue on pizza. Concerns were also raised by content publishers, who feared a decline in web traffic as users relied on the summaries instead of visiting source websites. A Google patent from 2026 raised the concern of webmasters that Google could entirely replace the landing page of websites by an AI optimized copy of the website in its results. There is also apprehension about the ethical implications of AI-driven content aggregation, including its impact on intellectual property rights and the visibility of smaller content providers. The European Commission announced in December 2025 that they were investigating whether AI Overviews breached European competition law. In response, Google has stated its commitment to improve content validation and refine the algorithms used to filter unreliable information. Google implemented measures to prioritize link placement within AI Overviews, aiming to balance user convenience with the needs of content creators. In January 2026, Google restricted AI Overviews on certain health-related searches following an investigation by The Guardian. == Lawsuits == On February 24, 2025, Chegg sued Alphabet over the AI Overviews feature, claiming that it was leading to students preferring "low-quality, unverified AI summaries", thus violating antitrust law. Chegg also said it was considering either a sale or a take-private transaction. In September 2025, Penske Media Corporation, the publisher of Rolling Stone and The Hollywood Reporter, sued Google, claiming that AI Overviews illegally regurgitate content from their websites and drive off potential site visitors by always appearing on top of the search results while leaving little incentive to see the linked sources. The company stated that "the future of digital media and [...] its integrity [...] is threatened by Google's current actions", alleging that 20% of searches that link to Penske-owned websites show AI Overviews and that the figure is expected to rise. Google spokesperson José Castañeda called the claims "meritless" and stated that "AI Overviews send traffic to a greater diversity of sites." In 2026, Canadian musician Ashley MacIsaac filed a lawsuit against Google claiming that the AI Overview feature had wrongly stated that MacIsaac had been convicted of numerous criminal offences and was on the sex offender registry. He claims this incorrect information led to the cancellation of a December 2025 gig organized by the Sipekne'katik First Nation.

  Read more →
• 

  Line Drawing System-1

  LDS-1 (Line Drawing System-1) was a calligraphic (vector, rather than raster) display processor and display device created by Evans & Sutherland in 1969. This model was known as the first graphics device with a graphics processing unit. == Features == It was controlled by a variety of host computers. Straight lines were smoothly rendered in real-time animation. General principles of operation were similar to the systems used today: 4x4 transformation matrices, 1x4 vertices. Possible uses included flight simulation (in the product brochure there are screenshots of landing on a carrier), scientific imaging and GIS systems. == History == The first LDS-1 was shipped to the customer (BBN) in August 1969. Only a few of these systems were ever built. One was used by the Los Angeles Times as their first typesetting/layout computer. One went to NASA Ames Research Center for Human Factors Research. Another was bought by the Port Authority of New York to develop a tugboat pilot trainer for navigation in the harbor. The MIT Dynamic Modeling had one, and there was a program for viewing an ongoing game of Maze War.

  Read more →
• 

  Reasoning model

  A reasoning model, also known as a reasoning language model (RLM) or large reasoning model (LRM), is a type of large language model (LLM) that has been specifically trained to solve complex tasks requiring multiple steps of logical reasoning. These models demonstrate superior performance on logic, mathematics, and programming tasks compared to standard LLMs. They possess the ability to revisit and revise earlier reasoning steps and utilize additional computation during inference as a method to scale performance, complementing traditional scaling approaches based on training data size, model parameters, and training compute. == Overview == Unlike traditional language models that generate responses immediately, reasoning models allocate additional compute, or thinking, time before producing an answer to solve multi-step problems. OpenAI introduced this terminology in September 2024 when it released the o1 series, describing the models as designed to "spend more time thinking" before responding. The company framed o1 as a reset in model naming that targets complex tasks in science, coding, and mathematics, and it contrasted o1's performance with GPT-4o on benchmarks such as AIME and Codeforces. Independent reporting the same week summarized the launch and highlighted OpenAI's claim that o1 automates chain-of-thought style reasoning to achieve large gains on difficult exams. In operation, reasoning models generate internal chains of intermediate steps, then select and refine a final answer. OpenAI reported that o1's accuracy improves as the model is given more reinforcement learning during training and more test-time compute at inference. The company initially chose to hide raw chains and instead return a model-written summary, stating that it "decided not to show" the underlying thoughts so researchers could monitor them without exposing unaligned content to end users. Commercial deployments document separate "reasoning tokens" that meter hidden thinking and a control for "reasoning effort" that tunes how much compute the model uses. These features make the models slower than ordinary chat systems while enabling stronger performance on difficult problems. == History == The research trajectory toward reasoning models combined advances in supervision, prompting, and search-style inference. Early alignment work on reinforcement learning from human feedback showed that models can be fine-tuned to follow instructions with "human feedback" and preference-based rewards. In 2022, Google Research scientists Jason Wei and Denny Zhou showed that chain-of-thought prompting "significantly improves the ability" of large models on complex reasoning tasks. Input → Step 1 → Step 2 → ⋯ → Step n ⏟ Reasoning chain → Answer {\displaystyle {\text{Input}}\rightarrow \underbrace {{\text{Step}}_{1}\rightarrow {\text{Step}}_{2}\rightarrow \cdots \rightarrow {\text{Step}}_{n}} _{\text{Reasoning chain}}\rightarrow {\text{Answer}}} A companion result demonstrated that the simple instruction "Let's think step by step" can elicit zero-shot reasoning. Follow-up work introduced self-consistency decoding, which "boosts the performance" of chain-of-thought by sampling diverse solution paths and choosing the consensus, and tool-augmented methods such as ReAct, a portmanteau of Reason and Act, that prompt models to "generate both reasoning traces" and actions. Research then generalized chain-of-thought into search over multiple candidate plans. The Tree-of-Thoughts framework from Princeton computer scientist Shunyu Yao proposes that models "perform deliberate decision making" by exploring and backtracking over a tree of intermediate thoughts. OpenAI's reported breakthrough focused on supervising reasoning processes rather than only outcomes, with Lightman et al.'s "Let's Verify Step by Step" reporting that rewarding each correct step "significantly outperforms outcome supervision" on challenging math problems and improves interpretability by aligning the chain-of-thought with human judgment. OpenAI's o1 announcement ties these strands together with a large-scale reinforcement learning algorithm that trains the model to refine its own chain of thought, and it reports that accuracy rises with more training compute and more time spent thinking at inference. Together, these developments define the core of reasoning models. They use supervision signals that evaluate the quality of intermediate steps, they exploit inference-time exploration such as consensus or tree search, and they expose controls for how much internal thinking compute to allocate. OpenAI's o1 family made this approach available at scale in September 2024 and popularized the label "reasoning model" for LLMs that deliberately think before they answer. The development of reasoning models illustrates Richard S. Sutton's "bitter lesson" that scaling compute typically outperforms methods based on human-designed insights. This principle was demonstrated by researchers at the Generative AI Research Lab (GAIR), who initially attempted to replicate o1's capabilities using sophisticated methods including tree search and reinforcement learning in late 2024. Their findings, published in the "o1 Replication Journey" series, revealed that knowledge distillation, a comparatively straightforward technique that trains a smaller model to mimic o1's outputs, produced unexpectedly strong performance. This outcome illustrated how direct scaling approaches can, at times, outperform more complex engineering solutions. === Drawbacks === Reasoning models require significantly more computational resources during inference compared to non-reasoning models. Research on the American Invitational Mathematics Examination (AIME) benchmark found that reasoning models were 10 to 74 times more expensive to operate than their non-reasoning counterparts. The extended inference time is attributed to the detailed, step-by-step reasoning outputs that these models generate, which are typically much longer than responses from standard large language models that provide direct answers without showing their reasoning process. One researcher in early 2025 argued that these models may face potential additional denial-of-service concerns with "overthinking attacks." === Releases === ==== 2024 ==== In September 2024, OpenAI released o1-preview, a large language model with enhanced reasoning capabilities. The full version, o1, was released in December 2024. OpenAI initially shared preliminary results on its successor model, o3, in December 2024, with the full o3 model becoming available in 2025. Alibaba released reasoning versions of its Qwen large language models in November 2024. In December 2024, the company introduced QvQ-72B-Preview, an experimental visual reasoning model. In December 2024, Google introduced Deep Research in Gemini, a feature designed to conduct multi-step research tasks. On December 16, 2024, researchers demonstrated that by scaling test-time compute, a relatively small Llama 3B model could outperform a much larger Llama 70B model on challenging reasoning tasks. This experiment suggested that improved inference strategies can unlock reasoning capabilities even in smaller models. ==== 2025 ==== In January 2025, DeepSeek released R1, a reasoning model that achieved performance comparable to OpenAI's o1 at significantly lower computational cost. The release demonstrated the effectiveness of Group Relative Policy Optimization (GRPO), a reinforcement learning technique used to train the model. On January 25, 2025, DeepSeek enhanced R1 with web search capabilities, allowing the model to retrieve information from the internet while performing reasoning tasks. Research during this period further validated the effectiveness of knowledge distillation for creating reasoning models. The s1-32B model achieved strong performance through budget forcing and scaling methods, reinforcing findings that simpler training approaches can be highly effective for reasoning capabilities. On February 2, 2025, OpenAI released Deep Research, a feature powered by their o3 model that enables users to conduct comprehensive research tasks. The system generates detailed reports by automatically gathering and synthesizing information from multiple web sources. OpenAI called GPT-4.5 its "last non-chain-of-thought model", and implemented with GPT-5 a router model that selects a model based on the difficulty of the task. ==== 2026 ==== In January 2026, Moonshot AI released Kimi K2.5, an open-source 1 trillion parameter MoE model with 32 billion active parameters. It uses an “Agent Swarm” system that dynamically decomposes tasks into sub-agents for reasoning and execution, enabling more scalable multi-step problem solving than a single sequential reasoning chain. == Training == Reasoning models follow the familiar large-scale pretraining used for frontier language models, then diverge in the post-training and optimization. OpenAI reports that o1 is trained with a large-

  Read more →
• 

  Principle of rationality

  The principle of rationality (or rationality principle) was coined by Karl R. Popper in his Harvard Lecture of 1963, and published in his book Myth of Framework. It is related to what he called the 'logic of the situation' in an Economica article of 1944/1945, published later in his book The Poverty of Historicism. According to Popper's rationality principle, agents act in the most adequate way according to the objective situation. It is an idealized conception of human behavior which he used to drive his model of situational analysis. Cognitive scientist Allen Newell elaborated on the principle in his account of knowledge level modeling. == Popper == Popper called for social science to be grounded in what he called situational analysis or situational logic. This requires building models of social situations which include individual actors and their relationship to social institutions, e.g. markets, legal codes, bureaucracies, etc. These models attribute certain aims and information to the actors. This forms the 'logic of the situation', the result of reconstructing meticulously all circumstances of an historical event. The 'principle of rationality' is the assumption that people are instrumental in trying to reach their goals, and this is what drives the model. Popper believed that this model could be continuously refined to approach the objective truth. Popper called his principle of rationality nearly empty (a technical term meaning without empirical content) and strictly speaking false, but nonetheless tremendously useful. These remarks earned him a lot of criticism because seemingly he had swerved from his famous Logic of Scientific Discovery. Among the many philosophers having discussed Popper's principle of rationality from the 1960s up to now are Noretta Koertge, R. Nadeau, Viktor J. Vanberg, Hans Albert, E. Matzner, Ian C. Jarvie, Mark A. Notturno, John Wettersten, Ian C. Böhm. == Newell == In the context of knowledge-based systems, Newell (in 1982) proposed the following principle of rationality: "If an agent has knowledge that one of its actions will lead to one of its goals, then the agent will select that action." This principle is employed by agents at the knowledge level to move closer to a desired goal. An important philosophical difference between Newell and Popper is that Newell argued that the knowledge level is real in the sense that it exists in nature and is not made up. This allowed Newell to treat the rationality principle as a way of understanding nature and avoid the problems Popper ran into by treating knowledge as non physical and therefore non empirical.

  Read more →
• 

  Artificial intelligence in hiring

  Artificial intelligence can be used to automate aspects of the job recruitment process. Advances in artificial intelligence, such as the advent of machine learning and the growth of big data, enable AI to be utilized to recruit, screen, and predict the success of applicants. Proponents of artificial intelligence in hiring claim it reduces bias, assists with finding qualified candidates, and frees up human resource workers' time for other tasks, while opponents worry that AI perpetuates inequalities in the workplace and will eliminate jobs. Despite the potential benefits, the ethical implications of AI in hiring remain a subject of debate, with concerns about algorithmic transparency, accountability, and the need for ongoing oversight to ensure fair and unbiased decision-making throughout the recruitment process. == Background == It is common for companies to use AI to automate aspects of their hiring process, especially the hospitality, finance, and tech industries. == Uses == === Screeners === Screeners are tests that allow companies to sift through a large applicant pool and extract applicants that have desirable features. What factors are used to screen applicants is a concern to ethicists and civil rights activists. A screener that favors people who have similar characteristics to those already employed at a company may perpetuate inequalities. For example, if a company that is predominantly white and male uses its employees' data to train its screener it may accidentally create a screening process that favors white, male applicants. The automation of screeners also has the potential to reduce biases. Biases against applicants with African American sounding names have been shown in multiple studies. An AI screener has the potential to limit human bias and error in the hiring process, allowing more minority applicants to be successful. === Recruitment === Recruitment involves the identification of potential applicants and the marketing of positions. AI is commonly utilized in the recruitment process because it can help boost the number of qualified applicants for positions. Companies are able to use AI to target their marketing to applicants who are likely to be good fits for a position. This often involves the use of social media sites advertising tools, which rely on AI. Facebook allows advertisers to target ads based on demographics, location, interests, behavior, and connections. Facebook also allows companies to target a "look-a-like" audience, that is the company supplies Facebook with a data set, typically the company's current employees, and Facebook will target the ad to profiles that are similar to the profiles in the data set. Additionally, job sites like Indeed, Glassdoor, and ZipRecruiter target job listings to applicants that have certain characteristics employers are looking for. Targeted advertising has many advantages for companies trying to recruit such being a more efficient use of resources, reaching a desired audience, and boosting qualified applicants. This has helped make it a mainstay in modern hiring. Who receives a targeted ad can be controversial. In hiring, the implications of targeted ads have to do with who is able to find out about and then apply to a position. Most targeted ad algorithms are proprietary information. Some platforms, like Facebook and Google, allow users to see why they were shown a specific ad, but users who do not receive the ad likely never know of its existence and also have no way of knowing why they were not shown the ad. === Interviews === Chatbots were one of the first applications of AI and are commonly used in the hiring process. Interviewees interact with chatbots to answer interview questions, and an analysis of their responses can be generated by AI. HireVue has created technology that analyzes interviewees' responses and gestures during recorded video interviews. Over 12 million interviewees have been screened by the more than 700 companies that utilize the service. == Controversies == Artificial intelligence in hiring confers many benefits, but it also has some challenges that have concerned experts. AI is only as good as the data it is using. Biases can inadvertently be baked into the data used in AI. Often companies will use data from their employees to decide what people to recruit or hire. This can perpetuate bias and lead to more homogenous workforces. Facebook Ads was an example of a platform that created such controversy for allowing business owners to specify what type of employee they are looking for. For example, job advertisements for nursing and teach could be set such that only women of a specific age group would see the advertisements. Facebook Ads has since then removed this function from its platform, citing the potential problems with the function in perpetuating biases and stereotypes against minorities. The growing use of Artificial Intelligence-enabled hiring systems has become an important component of modern talent hiring, particularly through social networks such as LinkedIn and Facebook. However, data overflow embedded in the hiring systems, based on Natural Language Processing (NLP) methods, may result in unconscious gender bias. Utilizing data driven methods may mitigate some bias generated from these systems It can also be hard to quantify what makes a good employee. This poses a challenge for training AI to predict which employees will be best. Commonly used metrics like performance reviews can be subjective and have been shown to favor white employees over black employees and men over women. Another challenge is the limited amount of available data. Employers only collect certain details about candidates during the initial stages of the hiring process. This requires AI to make determinations about candidates with very limited information to go off of. Additionally, many employers do not hire employees frequently and so have limited firm specific data to go off. To combat this, many firms will use algorithms and data from other firms in their industry. AI's reliance on applicant and current employees personal data raises privacy issues. These issues effect both the applicants and current employees, but also may have implications for third parties who are linked through social media to applicants or current employees. For example, a sweep of someone's social media will also show their friends and people they have tagged in photos or posts. == AI and the future of hiring == Artificial intelligence along with other technological advances such as improvements in robotics have placed 47% of jobs at risk of being eliminated in the near future. In 2016 the founder of the World Economic Forum, Klaus Schwab, called AI and related technology the "Fourth Industrial Revolution". According to some scholars, however, the transformative impact of AI on labor has been overstated. The "no-real-change" theory holds that an IT revolution has already occurred, but that the benefits of implementing new technologies does not outweigh the costs associated with adopting them. This theory claims that the result of the IT revolution is thus much less impactful than had originally been forecasted. Other scholars refute this theory claiming that AI has already led to significant job loss for unskilled labor and that it will eliminate middle skill and high skill jobs in the future. This position is based around the idea that AI is not yet a technology of general use and that any potential 4th industrial revolution has not fully occurred. A third theory holds that the effect of AI and other technological advances is too complicated to yet be understood. This theory is centered around the idea that while AI will likely eliminate jobs in the short term it will also likely increase the demand for other jobs. The question then becomes will the new jobs be accessible to people and will they emerge near when jobs are eliminated. == AI use in hiring for candidates == Job seekers now commonly encounter AI-driven tools at multiple stages, including automated resume parsing, video interview analysis, chatbots for frequently asked questions, and real‑time application updates. Some candidates also employ AI career agents, designed to optimize job searches, tailor applications, and interface with hiring teams. A 2025 Australian study found that AI-driven video interviews exhibited transcription error rates of up to 22% for non‑native speakers and those with speech-related disabilities, raising concerns of discrimination. A 2017 study in the Journal of Sociology found persistent gender and racial disparities in AI screening tools, even when fairness interventions are applied. Industry observers describe a growing “AI arms race” in recruitment, where both employers and candidates increasingly rely on automated agents. Employers use recruiting systems to source and filter applicants, while candidates deploy AI agents to prepare and submit applications. == Regulations == The Artifici

  Read more →
• 

  KoalaPad

  The KoalaPad is a graphics tablet, released in 1983 by US company Koala Technologies Corporation, for the Apple II, TRS-80 Color Computer (as the TRS-80 Touch Pad), Atari 8-bit computers, Commodore 64, and IBM PC compatibles. Originally designed by Dr. David Thornburg as a low-cost computer drawing tool for schools, the Koala Pad and the bundled drawing program, KoalaPainter, was popular with home users as well. KoalaPainter was called KoalaPaint in some versions for the Apple II, and PC Design for the IBM PC. A program called Graphics Exhibitor was included for creating slideshow presentations from KoalaPainter drawings. == Description == The pad was four inches square (i.e. roughly 10×10 cm) and mounted on a slightly inclined base with the back of the pad higher than the front. At the top, "behind" the pad, were two buttons. The pad hooked into the computer using the analog signals of the joystick ports (the so-called paddle inputs), which meant that it had a low resolution and tended to jostle the cursor if moved during use. As an alternative to the drawing stylus, the pad could as easily be operated by the user's fingers for tasks that demanded less precision, such as selecting between menu items (thus using the pad as a kind of "indirect touch screen"). The top-mounted buttons tended to be somewhat frustrating to use, as the user had to "reach around" the stylus to push the buttons in order to start or stop drawing. A similar tablet from Atari, the Atari CX77 Touch Tablet, addressed this with a built-in button on the stylus, which some enterprising users adapted for use with their KoalaPad. == KoalaPainter == The pad shipped with a simple bitmap graphics editor developed by Audio Light called KoalaPainter, PC Design or Micro Illustrator depending on the target machine (see release history). Although bundled with the pad, KoalaPainter could also be operated using an ordinary digital joystick. One unique feature of the program, for its time, was that it held two pictures in the computer's memory, allowing the user to flip from one to the other—a function commonly used in order to study the differences between an original and a modified picture, and to copy and paste between two different pictures. Some third-party bitmap editors could also be used with the KoalaPad, such as Broderbund's Dazzle Draw for the Apple II. === Release history === KoalaPainter for Commodore 64 (1983) and Atari 8-bit computers (1983) PC Design for the IBM PC (1983) Micro Illustrator for the Apple II (1983), Atari 8-bit computers (1983) and Commodore Plus/4 (1984) KoalaPainter II for Commodore 64 (1984) === Reception === Ahoy! called KoalaPainter "a very powerful and effective color drawing package", and concluded that it and the KoalaPad were "excellent in ease of use, a fine choice for a beginner as well as young children". BYTE's reviewer stated in December 1984 that he made far fewer errors when using an Apple Mouse with MousePaint than with a KoalaPad and its software. He found that MousePaint was easier to use and more efficient, predicting that the mouse would receive more software support than the pad. Cassie Stahl in InfoWorld's Essential Guide to Atari Computers praised the tablet and its documentation, rating it "Excellent" among all categories and stating that "Playing with the KoalaPad becomes addictive. It does everything it claims to, and it does it well". She also liked Micro Illustrator, rating it "Excellent" except for "Good" for Performance. While criticizing the limited erase function, Stahl reported an undocumented feature enabling exporting pictures to other software. === File format === The Commodore 64 version of KoalaPainter used a fairly simple file format corresponding directly to the way bitmapped graphics are handled on the computer: A two-byte load address, followed immediately by 8,000 bytes of raw bitmap data, 1,000 bytes of raw "Video Matrix" data, 1,000 bytes of raw "Color RAM" data, and a one-byte Background Color field. == KoalaWare == Koala Technologies offered more software beyond the bundled KoalaPainter and Graphics Exhibitor for use with the pad. Among these applications, marketed under the moniker KoalaWare (like KoalaPainter itself), was educational software for use with customized keypads and overlays, such as spelling tools, music programs, and mathematics instruction software, as well as software for "translating" graphical designs into Logo programs.

  Read more →
• 

  Elements of AI

  Elements of AI is a massive open online course (MOOC) teaching the basics of artificial intelligence. The course, originally launched in 2018, is designed and organized by the University of Helsinki and learning technology company MinnaLearn. The course includes modules on machine learning, neural networks, the philosophy of artificial intelligence, and using artificial intelligence to solve problems. It consists of two parts: Introduction to AI and its sequel, Building AI, that was released in late 2020. In November 2019, the course was named one of four winners of MIT’s Inclusive Innovation Challenge. University of Helsinki's computer science department is known as the alma mater of Linus Torvalds, a Finnish-American software engineer who is the creator of the Linux kernel, which is the kernel for Linux operating systems. == EU’s AI pledge == The government of Finland has pledged to offer the course for all EU citizens by the end of 2021, as the course is made available in all the official EU languages. The initiative was launched as part of Finland's Presidency of the Council of the European Union in 2019, with the European Commission providing translations of the course materials. In 2017, Finland launched an AI strategy to stay competitive in the field of AI amid growing competition between China and the United States. With the support of private companies and the government, Finland's now-realized goal was to get 1 percent of its citizens to participate in Elements of AI. Other governments have also given their support to the course. For instance, Germany's Federal Minister for Economic Affairs and Energy Peter Altmeier has encouraged citizens to take part in the course to help Germany gain a competitive advantage in AI. Sweden's Minister for Energy and Minister for Digital Development Anders Ygeman has said that Sweden aims to teach 1 percent of its population the basics of AI like Finland has. == Participants == Elements of AI had enrolled more than 1 million students from more than 110 countries by May 2023. A quarter of the course's participants are aged 45 and over, and some 40 percent are women. Among Nordic participants, the share of women is nearly 60 percent. In September 2022, the course was available in Finnish, Swedish, Estonian, English, German, Latvian, Norwegian, French, Belgian, Czech, Greek, Slovakian, Slovenian, Latvian, Lithuanian, Portuguese, Spanish, Irish, Icelandic, Maltese, Croatian, Romanian, Italian, Dutch, Polish, and Danish.

  Read more →
• 

  Embodied cognitive science

  Embodied cognitive science is an interdisciplinary field of research, the aim of which is to explain the mechanisms underlying intelligent behavior. It comprises three main methodologies: the modeling of psychological and biological systems in a holistic manner that considers the mind and body as a single entity; the formation of a common set of general principles of intelligent behavior; and the experimental use of robotic agents in controlled environments. == Contributors == Embodied cognitive science borrows heavily from embodied philosophy and the related research fields of cognitive science, psychology, neuroscience and artificial intelligence. Contributors to the field include: From the perspective of neuroscience, Gerald Edelman of the Neurosciences Institute at La Jolla, Francisco Varela of CNRS in France, and J. A. Scott Kelso of Florida Atlantic University From the perspective of psychology, Lawrence Barsalou, Michael Turvey, Vittorio Guidano and Eleanor Rosch From the perspective of linguistics, Gilles Fauconnier, George Lakoff, Mark Johnson, Leonard Talmy and Mark Turner From the perspective of language acquisition, Eric Lenneberg and Philip Rubin at Haskins Laboratories From the perspective of anthropology, Edwin Hutchins, Bradd Shore, James Wertsch and Merlin Donald. From the perspective of autonomous agent design, early work is sometimes attributed to Rodney Brooks or Valentino Braitenberg From the perspective of artificial intelligence, Understanding Intelligence by Rolf Pfeifer and Christian Scheier or How the Body Shapes the Way We Think, by Rolf Pfeifer and Josh C. Bongard From the perspective of philosophy, Andy Clark, Dan Zahavi, Shaun Gallagher, and Evan Thompson In 1950, Alan Turing proposed that a machine may need a human-like body to think and speak: It can also be maintained that it is best to provide the machine with the best sense organs that money can buy, and then teach it to understand and speak English. That process could follow the normal teaching of a child. Things would be pointed out and named, etc. Again, I do not know what the right answer is, but I think both approaches should be tried. == Traditional cognitive theory == Embodied cognitive science is an alternative theory to cognition in which it minimizes appeals to computational theory of mind in favor of greater emphasis on how an organism's body determines how and what it thinks. Traditional cognitive theory is based mainly around symbol manipulation, in which certain inputs are fed into a processing unit that produces an output. These inputs follow certain rules of syntax, from which the processing unit finds semantic meaning. Thus, an appropriate output is produced. For example, a human's sensory organs are its input devices, and the stimuli obtained from the external environment are fed into the nervous system which serves as the processing unit. From here, the nervous system is able to read the sensory information because it follows a syntactic structure, thus an output is created. This output then creates bodily motions and brings forth behavior and cognition. Of particular note is that cognition is sealed away in the brain, meaning that mental cognition is cut off from the external world and is only possible by the input of sensory information. == The embodied cognitive approach == Embodied cognitive science differs from the traditionalist approach in that it denies the input-output system. This is chiefly due to the problems presented by the Homunculus argument, which concluded that semantic meaning could not be derived from symbols without some kind of inner interpretation. If some little man in a person's head interpreted incoming symbols, then who would interpret the little man's inputs? Because of the specter of an infinite regress, the traditionalist model began to seem less plausible. Thus, embodied cognitive science aims to avoid this problem by defining cognition in three ways. === Physical attributes of the body === The first aspect of embodied cognition examines the role of the physical body, particularly how its properties affect its ability to think. This part attempts to overcome the symbol manipulation component that is a feature of the traditionalist model. Depth perception, for instance, can be better explained under the embodied approach due to the sheer complexity of the action. Depth perception requires that the brain detect the disparate retinal images obtained by the distance of the two eyes. In addition, body and head cues complicate this further. When the head is turned in a given direction, objects in the foreground will appear to move against objects in the background. From this, it is said that some kind of visual processing is occurring without the need of any kind of symbol manipulation. This is because the objects appearing to move the foreground are simply appearing to move. This observation concludes then that depth can be perceived with no intermediate symbol manipulation necessary. A more poignant example exists through examining auditory perception. Generally speaking the greater the distance between the ears, the greater the possible auditory acuity. Also relevant is the amount of density in between the ears, for the strength of the frequency wave alters as it passes through a given medium. The brain's auditory system takes these factors into account as it process information, but again without any need for a symbolic manipulation system. This is because the distance between the ears for example does not need symbols to represent it. The distance itself creates the necessary opportunity for greater auditory acuity. The amount of density between the ears is similar, in that it is the actual amount itself that simply forms the opportunity for frequency alteration. Thus under consideration of the physical properties of the body, a symbolic system is unnecessary and an unhelpful metaphor. === The body's role in the cognitive process === The second aspect draws heavily from George Lakoff's and Mark Johnson's work on concepts. They argued that humans use metaphors whenever possible to better explain their external world. Humans also have a basic stock of concepts in which other concepts can be derived from. These basic concepts include spatial orientations such as up, down, front, and back. Humans can understand what these concepts mean because they can directly experience them from their own bodies. For example, because human movement revolves around standing erect and moving the body in an up-down motion, humans innately have these concepts of up and down. Lakoff and Johnson contend this is similar with other spatial orientations such as front and back too. As mentioned earlier, these basic stocks of spatial concepts are the basis in which other concepts are constructed. Happy and sad for instance are seen now as being up or down respectively. When someone says they are feeling down, what they are really saying is that they feel sad for example. Thus the point here is that true understanding of these concepts is contingent on whether one can have an understanding of the human body. So the argument goes that if one lacked a human body, they could not possibly know what up or down could mean, or how it could relate to emotional states. [I]magine a spherical being living outside of any gravitational field, with no knowledge or imagination of any other kind of experience. What could UP possibly mean to such a being? While this does not mean that such beings would be incapable of expressing emotions in other words, it does mean that they would express emotions differently from humans. Human concepts of happiness and sadness would be different because human would have different bodies. So then an organism's body directly affects how it can think, because it uses metaphors related to its body as the basis of concepts. === Interaction of local environment === A third component of the embodied approach looks at how agents use their immediate environment in cognitive processing. Meaning, the local environment is seen as an actual extension of the body's cognitive process. The example of a personal digital assistant (PDA) is used to better imagine this. Echoing functionalism (philosophy of mind), this point claims that mental states are individuated by their role in a much larger system. So under this premise, the information on a PDA is similar to the information stored in the brain. So then if one thinks information in the brain constitutes mental states, then it must follow that information in the PDA is a cognitive state too. Consider also the role of pen and paper in a complex multiplication problem. The pen and paper are so involved in the cognitive process of solving the problem that it seems ridiculous to say they are somehow different from the process, in very much the same way the PDA is used for information like the brain. Another example examines how humans control and manipulate their environment

  Read more →