Image warping is the process of digitally manipulating an image such that any shapes portrayed in the image have been significantly distorted. Warping may be used for correcting image distortion as well as for creative purposes (e.g., morphing). The same techniques are equally applicable to video. While an image can be transformed in various ways, pure warping means that points are mapped to points without changing the colors. This can be based mathematically on any function from (part of) the plane to the plane. If the function is injective the original can be reconstructed. If the function is a bijection any image can be inversely transformed. Some methods are: Images may be distorted through simulation of optical aberrations. Images may be viewed as if they had been projected onto a curved or mirrored surface. (This is often seen in ray traced images.) Images can be partitioned into image polygons and each polygon distorted. Images can be distorted using morphing. The most obvious approach to transforming a digital image is the forward mapping. This applies the transform directly to the source image, typically generating unevenly-spaced points that will then be interpolated to generate the required regularly-spaced pixels. However, for injective transforms reverse mapping is also available. This applies the inverse transform to the target pixels to find the unevenly-spaced locations in the source image that contribute to them. Estimating them from source image pixels will require interpolation of the source image. To work out what kind of warping has taken place between consecutive images, one can use optical flow estimation techniques. == Image warping toolbox == ImWIP is an open-source, image warping tool for modeling deformation and motion in digital images, which contains differentiable image warping operators, together with their exact adjoints and derivatives.
Teknomo–Fernandez algorithm
The Teknomo–Fernandez algorithm (TF algorithm), is an efficient algorithm for generating the background image of a given video sequence. By assuming that the background image is shown in the majority of the video, the algorithm is able to generate a good background image of a video in O ( R ) {\displaystyle O(R)} -time using only a small number of binary operations and Boolean bit operations, which require a small amount of memory and has built-in operators found in many programming languages such as C, C++, and Java. == History == People tracking from videos usually involves some form of background subtraction to segment foreground from background. Once foreground images are extracted, then desired algorithms (such as those for motion tracking, object tracking, and facial recognition) may be executed using these images. However, background subtraction requires that the background image is already available and unfortunately, this is not always the case. Traditionally, the background image is searched for manually or automatically from the video images when there are no objects. More recently, automatic background generation through object detection, medial filtering, medoid filtering, approximated median filtering, linear predictive filter, non-parametric model, Kalman filter, and adaptive smoothening have been suggested; however, most of these methods have high computational complexity and are resource-intensive. The Teknomo–Fernandez algorithm is also an automatic background generation algorithm. Its advantage, however, is its computational speed of only O ( R ) {\displaystyle O(R)} -time, depending on the resolution R {\displaystyle R} of an image and its accuracy gained within a manageable number of frames. Only at least three frames from a video is needed to produce the background image assuming that for every pixel position, the background occurs in the majority of the videos. Furthermore, it can be performed for both grayscale and colored videos. == Assumptions == The camera is stationary. The light of the environment changes only slowly relative to the motions of the people in the scene. The number of people does not occupy the scene for most of the time at the same place. Generally, however, the algorithm will certainly work whenever the following single important assumption holds: For each pixel position, the majority of the pixel values in the entire video contain the pixel value of the actual background image (at that position).As long as each part of the background is shown in the majority of the video, the entire background image needs not to appear in any of its frames. The algorithm is expected to work accurately. == Background image generation == === Equations === For three frames of image sequence x 1 {\displaystyle x_{1}} , x 2 {\displaystyle x_{2}} , and x 3 {\displaystyle x_{3}} , the background image B {\displaystyle B} is obtained using B = x 3 ( x 1 ⊕ x 2 ) + x 1 x 2 {\displaystyle B=x_{3}(x_{1}\oplus x_{2})+x_{1}x_{2}} where ⊕ {\displaystyle \oplus } denotes the exclusive disjunctive bit operator. The Boolean mode function S {\displaystyle S} of the table occurs when the number of 1 entries is larger than half of the number of images such that S = { 1 , if ∑ i = 1 n x i ≥ ⌈ n 2 + 1 ⌉ , and n ≥ 3 0 , otherwise {\displaystyle S={\begin{cases}1,&{\text{if }}\sum _{i=1}^{n}x_{i}\geq \left\lceil {\frac {n}{2}}+1\right\rceil ,{\text{ and }}n\geq 3\\0,&{\text{otherwise}}\end{cases}}} For three images, the background image B {\displaystyle B} can be taken as the value x ¯ 1 x 2 x 3 + x 1 x ¯ 2 x 3 + x 1 x 2 x ¯ 3 + x 1 x 2 x 3 {\displaystyle {\bar {x}}_{1}x_{2}x_{3}+x_{1}{\bar {x}}_{2}x_{3}+x_{1}x_{2}{\bar {x}}_{3}+x_{1}x_{2}x_{3}} === Background generation algorithm === At the first level, three frames are selected at random from the image sequence to produce a background image by combining them using the first equation. This yields a better background image at the second level. The procedure is repeated until desired level L {\displaystyle L} . == Theoretical accuracy == At level ℓ {\displaystyle \ell } , the probability p ℓ {\displaystyle p_{\ell }} that the modal bit predicted is the actual modal bit is represented by the equation p ℓ = ( p ℓ − 1 ) 3 + 3 ( p ℓ − 1 ) 2 ( 1 − p ℓ − 1 ) {\displaystyle p_{\ell }=(p_{\ell -1})^{3}+3(p_{\ell -1})^{2}(1-p_{\ell -1})} . The table below gives the computed probability values across several levels using some specific initial probabilities. It can be observed that even if the modal bit at the considered position is at a low 60% of the frames, the probability of accurate modal bit determination is already more than 99% at 6 levels. == Space complexity == The space requirement of the Teknomo–Fernandez algorithm is given by the function O ( R F + R 3 L ) {\displaystyle O(RF+R3^{L})} , depending on the resolution R {\displaystyle R} of the image, the number F {\displaystyle F} of frames in the video, and the desired number L {\displaystyle L} of levels. However, the fact that L {\displaystyle L} will probably not exceed 6 reduces the space complexity to O ( R F ) {\displaystyle O(RF)} . == Time complexity == The entire algorithm runs in O ( R ) {\displaystyle O(R)} -time, only depending on the resolution of the image. Computing the modal bit for each bit can be done in O ( 1 ) {\displaystyle O(1)} -time while the computation of the resulting image from the three given images can be done in O ( R ) {\displaystyle O(R)} -time. The number of the images to be processed in L {\displaystyle L} levels is O ( 3 L ) {\displaystyle O(3^{L})} . However, since L ≤ 6 {\displaystyle L\leq 6} , then this is actually O ( 1 ) {\displaystyle O(1)} , thus the algorithm runs in O ( R ) {\displaystyle O(R)} . == Variants == A variant of the Teknomo–Fernandez algorithm that incorporates the Monte-Carlo method named CRF has been developed. Two different configurations of CRF were implemented: CRF9,2 and CRF81,1. Experiments on some colored video sequences showed that the CRF configurations outperform the TF algorithm in terms of accuracy. However, the TF algorithm remains more efficient in terms of processing time. == Applications == Object detection Face detection Face recognition Pedestrian detection Video surveillance Motion capture Human-computer interaction Content-based video coding Traffic monitoring Real-time gesture recognition
Media preservation
Preservation of documents, pictures, recordings, digital content, etc., is a major aspect of archival science. It is also an important consideration for people who are creating time capsules, family history, historical documents, scrapbooks and family trees. Common storage media are not permanent, and there are few reliable methods of preserving documents and pictures for the future. == Paper/prints (photos) == Color negatives and ordinary color prints may fade away to nothing in a relatively short period if not stored and handled properly. This happens even if the negatives and prints are kept in the dark, because ambient light is not the determining factor, but heat and humidity are. The color degradation is the result of the dyes used in the color processes. Because color processing results in a less stable image than traditional black-and-white processing, black-and-white pictures from the 1920s are more likely to survive long-term than color films and photographs from after the middle 20th century. Black-and-white photographic films using silver halide emulsions are the only film types that have proven to last for archival storage. The determining factors for longevity include the film base type, proper processing (develop, stop, fix and wash) and proper storage. Early films used a Cellulose nitrate base which was prone to decomposition and highly flammable. Nitrate film was replaced with acetate-base films. These Cellulose acetate films were later discovered to outgass acids (also referred to as vinegar syndrome). Acetate films were replaced in the early 1980s by polyester film base materials which have been determined to be more stable than film stocks with a nitrate or acetate base. Color prints made on most inkjet printers look very good at first but they have a very short lifespan, measured in months rather than in years. Even prints from commercial photo labs will start to fade in a matter of years if not processed properly and stored in cool, dry environments. == Documents/books == With documents for which the media are not so critical as what the documents contain, the information in documents can be copied by using photocopiers and image scanners. Books and manuscripts can also have their information saved without destruction by using a book scanner. Where the medium itself needs to be preserved, for example if a document is a crayon sketch by a famous artist on paper, a complex process of preservation may be used. Depending on the condition and importance of the item this can include gluing the media onto more stable media, or protective enclosing of the media. Polyester sleeves, acid-free folders, and pH buffered document boxes are common supportive protective enclosures whose selection must match the media's chemical and physical properties. Other considerations in preserving paper/books are: Damaging light, particularly UV light, which fades and destroys media over time by breaking down the molecules. Atmosphere contains small traces of sulfur dioxide and nitric acid which turn media yellow and break the fibers down. Humidity and moisture also aid in the breakdown of media. If there is too much, the document can be attacked by bacteria, and if too little, cellulose material breaks down. Temperature, particularly elevated ones, can destroy some media. Low temperatures can cause the water to form crystals which expands destroying the structure of paper-based documents. == Online photo albums == Although there are many websites that allow the upload of photographs and videos, digital preservation for the long-term is still considered an issue. There is a lack of confidence that such websites are capable of storing data for long periods of time (ex. 50 years) without data degradation or loss. == Optical media - CD, DVD, Blu-ray, M-Disc == Write-once optical media, such as CD-Rs and DVD-Rs, typically contain an organic dye that distinguishes data reading from data writing based on the dye's transparency along the disc. Conventional CDs and DVDs have finite shelf-life due to natural degradation of the dye; the newer M-DISC uses inorganic material technology to produce molded DVDs and Blu-Rays (up to 3-layer 100GB BDXL) with a claimed lifespan of 100-1000 years if stored correctly with most BD & BDXL rated read/writers enabling the higher power mode for the M-Disc format after 2011. The National Archives and Records Administration lists published life expectancies to be 10 or 25 years or more for normal CDs and DVDs and conservative life expectancies to be between 2 and 5 years. Storage environments, such as temperature and humidity, as well as handling conditions such as frequency of media use and compatibility between the recorder and media, affect media shelf-life. Improvements in media storage and migrations to new recording technologies can make certain formats obsolete within their respective lifespan. Technologists have pointed to internet streaming services, where services such as video-on-demand have contributed to the 33 percent decline in DVD sales the past 5 years, as a challenge for digital preservation. == Magnetic media - video cassettes, tapes, hard drives == Magnetic media such as audio and video tape and floppy disks also have limited life spans. Audio and video tapes require specific care and handling to ensure that the recorded information will be preserved. For information that must be preserved indefinitely, periodic transcription from old media to new ones is necessary, not only because the media are unstable but also because the recording technology may become obsolete. Magnetic media also deteriorates naturally with typical shelf lives between 10 and 20 years. Magnetic tape can degrade from binder hydrolysis or magnetic remanence decay. Binder hydrolysis, also known as sticky-shed syndrome, refers to the breakdown of binder, or glue, that holds the magnetic particles to the polyester base of the tape. Tapes which have been stored in hot, humid conditions are particularly vulnerable to this phenomenon and may suffer from accelerated degradation. Severe binder can cause the magnetic material to fall off or sheds from the base, leaving a pile of dust and clear backing. Archivists can bake the tape, which evaporates water molecules on the tape, to temporarily restore the binder before making a copy. Magnetic tape can also be destabilized by magnetic remanence decay, which refers to the weakening of the tape's magnetization over time. This weakens the affected tape's readability, leading to reduced sound clarity and volume or picture hue and contrast. Baking the tape will not restore magnetization. Media at risk include recorded media such as master audio recordings of symphonies and videotape recordings of the news gathered over the last 40 years. Threats to media that must be considered when archiving important record media include accidental erasure, physical loss due to disasters such as fires and floods, and media degradation. Along with the actual media being degraded over the years, the machines that are available to play back or reproduce the audio sources are becoming archaic themselves. Manufacturers and their support (parts, technical updates) for their machines have disappeared throughout the years. Even if the medium is vaulted and archived correctly, the mechanical properties of the machines have deteriorated to the point that they could do more harm than good to the tape being played. Many major film studios are now backing up their libraries by converting them to electronic media files, such as .AIFF or .WAV-based files via digital audio workstations. That way, even if the digital platform manufacturer goes out of business or no longer supports their product, the files can still be played on any common computer. There is a detailed process that must take place previous to the final archival product now that a digital solution is in place. Sample rates and their conversion and reference speed are both critical in this process. In floppy disks, the lubricants inside the plastic jackets of many older floppies promote the decay of the magnetic medium. Also, the alignment of the magnetic particles of the disk substrate may gradually degrade, leading to a loss of formatting and data. Early laser disk media were prone to degradation as the layers of the disk substrate were bonded with an adhesive that was vulnerable to decay and would crumble over time. This would lead the different layers of the disk to peel apart, damaging the pitted data surface and rendering the disk unreadable.
Nanonetwork
A nanonetwork or nanoscale network is a set of interconnected nanomachines (devices a few hundred nanometers or a few micrometers at most in size) which are able to perform only very simple tasks such as computing, data storing, sensing and actuation. Nanonetworks are expected to expand the capabilities of single nanomachines both in terms of complexity and range of operation by allowing them to coordinate, share and fuse information. Nanonetworks enable new applications of nanotechnology in the biomedical field, environmental research, military technology and industrial and consumer goods applications. Nanoscale communication is defined in IEEE P1906.1. == Communication approaches == Classical communication paradigms need to be revised for the nanoscale. The two main alternatives for communication in the nanoscale are based either on electromagnetic communication or on molecular communication. === Electromagnetic === This is defined as the transmission and reception of electromagnetic radiation from components based on novel nanomaterials. Recent advancements in carbon and molecular electronics have opened the door to a new generation of electronic nanoscale components such as nanobatteries, nanoscale energy harvesting systems, nano-memories, logical circuitry in the nanoscale and even nano-antennas. From a communication perspective, the unique properties observed in nanomaterials will decide on the specific bandwidths for emission of electromagnetic radiation, the time lag of the emission, or the magnitude of the emitted power for a given input energy, amongst others. For the time being, two main alternatives for electromagnetic communication in the nanoscale have been envisioned. First, it has been experimentally demonstrated that is possible to receive and demodulate an electromagnetic wave by means of a nanoradio, i.e., an electromechanically resonating carbon nanotube which is able to decode an amplitude or frequency modulated wave. Second, graphene-based nano-antennas have been analyzed as potential electromagnetic radiators in the terahertz band. === Molecular === Molecular communication is defined as the transmission and reception of information by means of molecules. The different molecular communication techniques can be classified according to the type of molecule propagation in walkaway-based, flow-based or diffusion-based communication. In walkway-based molecular communication, the molecules propagate through pre-defined pathways by using carrier substances, such as molecular motors. This type of molecular communication can also be achieved by using E. coli bacteria as chemotaxis. In flow-based molecular communication, the molecules propagate through diffusion in a fluidic medium whose flow and turbulence are guided and predictable. The hormonal communication through blood streams inside the human body is an example of this type of propagation. The flow-based propagation can also be realized by using carrier entities whose motion can be constrained on the average along specific paths, despite showing a random component. A good example of this case is given by pheromonal long range molecular communications. In diffusion-based molecular communication, the molecules propagate through spontaneous diffusion in a fluidic medium. In this case, the molecules can be subject solely to the laws of diffusion or can also be affected by non-predictable turbulence present in the fluidic medium. Pheromonal communication, when pheromones are released into a fluidic medium, such as air or water, is an example of diffusion-based architecture. Other examples of this kind of transport include calcium signaling among cells, as well as quorum sensing among bacteria. Based on the macroscopic theory of ideal (free) diffusion the impulse response of a unicast molecular communication channel was reported in a paper that identified that the impulse response of the ideal diffusion based molecular communication channel experiences temporal spreading. Such temporal spreading has a deep impact in the performance of the system, for example in creating the intersymbol interference (ISI) at the receiving nanomachine. In order to detect the concentration-encoded molecular signal two detection methods named sampling-based detection (SD) and energy-based detection (ED) have been proposed. While the SD approach is based on the concentration amplitude of only one sample taken at a suitable time instant during the symbol duration, the ED approach is based on the total accumulated number of molecules received during the entire symbol duration. In order to reduce the impact of ISI a controlled pulse-width based molecular communication scheme has been analysed. The work presented in showed that it is possible to realize multilevel amplitude modulation based on ideal diffusion. A comprehensive study of pulse-based binary and sinus-based, concentration-encoded molecular communication system have also been investigated.
Hoopla (digital media service)
Hoopla Digital is a web and mobile streaming platform launched in 2013 that provides access to a wide range of digital media, including audiobooks, eBooks, comics, manga, music, movies, and TV shows. The service is available to users through participating public libraries, allowing library cardholders to borrow and stream digital media. Hoopla is a division of Midwest Tape. == History == Hoopla was launched in 2013. Its goal was for libraries to provide patrons with access to digital content such as audiobooks, music, movies, and TV shows, without the need for holds or waiting lists. Hoopla's model is a pay-per-use system, which means patrons can borrow items instantly. Since its inception, the service has expanded its offerings to include eBooks and comics. The app was built exclusively for public libraries and their patrons. Hoopla Digital is the only platform that combines all formats and all license models into one convenient app with no platform fees. In 2017, Hoopla became available on Apple TV, Amazon Fire TV, Android TV, and Roku, allowing users to stream content on larger screens. In 2020, Hoopla Flex and Bonus Borrows programs are introduced, enabling libraries to move their one copy/one user titles. At that time, there were 6.5 million library card holders and 2,700+ library partners. In 2021, the BingePass was introduced, offering patrons seven days to access entire collections with just one borrow. In 2022, Apple CarPlay and Android Auto become available, giving users safe and easy access while driving. In 2023, manga joins Hoopla's comic collection, adding 1.5 million titles to Hoopla's offerings. In January 2025, Hoopla introduced a new streaming feature called SeasonPass. Building on the existing BingePass model, SeasonPass allows users to borrow an entire season of a television series with a single borrow. == Business model == Hoopla is free-of-charge for patrons of participating libraries. The content is paid for by library systems, using a "per circulation transaction model". == Content == Hoopla claims to have over 500,000 content titles across six formats, including over 25,000 comic books. As of November 2016, Hoopla's content comprised 35% audiobooks (for which Hoopla has contracts with publishers such as Blackstone Audio, HarperCollins, Simon & Schuster Audio, Tantor Audio, and others), followed by 22% movies (for which Hoopla has motion picture contracts with publishers such as Disney, Lionsgate, Starz, Warner Bros., and others), 19% music, 12% ebooks, 6% comics, and 6% television. One drawback is that Hoopla has few new bestsellers. In February 2025, 404 Media reported that Hoopla's collection includes books created by generative AI with fictional authors and dubious quality. Often not labeled as AI-produced or fact-checked, this AI slop can cost libraries money when checked out by unsuspecting patrons. Libraries like Sacramento Public library have questioned the sustainability of Hoopla's pay-per-use model and have considered transitioning to other digital platforms. === Areas served === Hoopla expanded to serve Australia and New Zealand in June 2021. == Technology == Hoopla content can be borrowed and consumed on the web, or via the native Android or iOS apps. Hoopla broadcasts only in Standard definition unlike most of its competitors such as Kanopy. == Parent company == John Eldred and Jeff Jankowski founded Hoopla's parent company, Midwest Tape, in 1989. Midwest Tape is a library vendor of physical media such as audiobooks, CDs, and DVD/Blu-ray. == Controversy == Hoopla and Midwest Tapes were censured by the Library Freedom Project and Library Futures in a joint statement for hosting what it described as "fascist propaganda", including a recent English translation of A New Nobility of Blood and Soil by Richard Walther Darré of the SS and books related to Holocaust denial, in public library collections without the input from the staff. Criticism was also directed at the inclusion of books on homosexuality, abortion, and vaccines claimed by the Library Freedom Project and Library Futures to be misinformation. On February 17, 2022, Hoopla removed a number of titles after public outcry about Holocaust denial books available on the app under non-fiction. The advocacy groups expressed appreciation for the response, however state that it is "insufficient," as they maintain concerns about the company's practices in selecting materials and lack of transparency.
Game Jolt
Game Jolt is a social community platform for video games, gamers and content creators. Founded by Yaprak and David DeCarmine, it is available on iOS, Android, and on the web and as a desktop app for Windows and Linux. Users share interactive content through a variety of formats including images, videos, live streams, chat rooms, and virtual events. == Features == === Crowd streaming === In 2021 Game Jolt revealed their own live streaming feature called Firesides. Firesides allowed multiple users to simultaneously livestream together with nearly no delay. The feature launched with a virtual concert showcasing its ability to accommodate multiple streamers. On October 16, 2023, Firesides were removed from Game Jolt. === Mobile app === Game Jolt Social by Game Jolt Inc. launched on both the Apple App Store and Google Play Store in March 2022. "It's clear to us that Gen Z is tired of generic social media and they want a place specifically for gaming that supports all types of content they're creating–art, videos, thoughts, and livestreams all in one place." said Game Jolt founder and CEO Yaprak DeCarmine, in a statement to VentureBeat. === Game API === The Game Jolt Application Programming Interface (usually known as the Game Jolt Game API) allows any developer using a game development platform that supports HTTP operations and MD5 or SHA-1. Game Jolt advertises that the API can: Create multiple "scoreboards" which collect high scores from players made publicly available on the game's profile and give user accounts EXP Award player's trophies which give user accounts EXP Store game data on Game Jolt's data servers Log whether a user is currently playing a game they're logged into via the GJAPI == Game jams and competitions == Game Jolt regularly hosts game jams where participants are encouraged to develop games for a chance to win prizes. They hosted their first game jam in 2009, Shocking Contest. In November 2014, Game Jolt announced the "Indies vs PewDiePie" game jam, partnering with the popular YouTuber Felix "PewDiePie" Kjellberg. Developers were given a weekend (21–24 November) to create a game with the theme of "fun to play, fun to watch" to suit the Let's Plays entertainment style. Users could rate entries afterwards until December 1 when the scores were counted up. The prize to the top 10 rated games was Felix playing the games on his channel as a means of promotion for the developers, although later he played other entries. One of the participants of the jam, now known as Outerminds Inc. was discovered and hired by PewDiePie to develop his mobile game, Legend of the Brofist. Game Jolt partnered with Felix, Sean "Jacksepticeye" McLoughlin and Mark "Markiplier" Fischbach to host "Indies vs Gamers" in July 2015. The requirements for entries were arcade games using the Game Jolt Game API highscore tables, to be made between the July 17–20 and the top 5 games were played on the partner's YouTube channels. Following the "Indies vs PewDiePie" game jam in 2014, Game Jolt released their internal jam hosting tools public for all users to use as a service, to create their own game jams that integrated with the main site. Today, Game Jolt focuses on hosting and co-hosting game competitions with established brands in order to bring monetary and educational opportunities to their users. On April 15, 2024, an announcement was made about a collaboration with Pocket Worlds for the "HighRise Game Jam". Pocket Worlds had sold NFTs up until roughly 2022, causing a community outburst. The situation was addressed, and the situation started to disperse. == Contests == == Events == Game Jolt hosts both physical and virtual events to entertain and prank its users, which consists of the following: == History == Game Jolt has supported independent creators with a central platform to manage their content and communities since its start in 2003. David DeCarmine began development of Game Jolt at the age of 14 for a group of hobbyists, making games and sharing on forums in an early iteration known as Holo World. The original intention was to create a platform for gamers where new games could be discoverable and quickly playable, and where feedback could be provided directly to the creators, allowing them to continue improving their games. In 2008, Game Jolt was registered as an LLC, then incorporated as Game Jolt Inc. in September 2020. A new site launched in 2015 featuring a responsive design, automated curation for both games and game news articles which weighs how recent a game was uploaded and how popular it is ("hot") and filtering options on game listings for platform, maturity rating and development status. In March 2022, Game Jolt launched a mobile application simultaneously on the Google Play Store and Apple App Store targeted at Gen Z gamers and creators. While in beta, the mobile app had 100,000 installs pre-launch. === Game store === Game Jolt continues to host a large library of independent games. Game developers can upload their games directly to the site to share or sell. They would allow distribution for downloadable games, later adding support for Adobe Flash, Unity and Java games which allowed support for browser based games. In February 2013, Game Jolt built support for browser-based HTML5 games as well. A user levelling system was released into public beta in April 2013, incorporating the GJAPI trophies and highscores, as well as site activity, to generate 'EXP' (experience points). Game Jolt Jams released in early 2014 as a service to allow users to create their own game jams that integrated with the main site. In April 2016, an online marketplace was announced and released the following month with an exclusive set of game titles, including Bendy and the Ink Machine, allowing developers to sell their games on the site. In January 2016, Game Jolt released source code of the client and site's front end on GitHub under MIT license. In January 2022, Game Jolt banned adult games from appearing on the site, stating in an email to developers that the site had become a "social media platform" and they "had to make decisions around the direction and future of the brand which has now included the removal of hosted games with explicitly adult content." In response to a tweet by Itch.io saying the site is not for prudes, they wrote in their own tweet: "Game Jolt is a platform with a large audience of 13-16 year olds. Our users asked us to clean up, so here we are." == Investments == After bootstrapping Game Jolt with revenue earned from ads on the website for years, the DeCarmines secured venture capital in 2020 from SoftBank, doing so again in 2021 from founders of Twitch, Rec Room, Modio and more.
Proximedia Group
Proximedia Group is a Belgian media group. == History == Proximedia Belgium was founded in 1998, by Fabrice Wuyts and Eric Glachant. The company specializes in providing websites for SMEs. The Proximedia Group SA was founded in 1999 and became the coordinating organization of Proximedia Belgium, Online, Bizbook Channel, Globule Bleu bvba, Click+, Proximedia France, Proximedia Nederland, and Proximedia Spain. The Proximedia Group has been listed at the Free Market of Euronext Brussels since 2005. In 2007, the Proximedia Group founded the Bizbook Channel. This branch specialized in creating corporate videos. In 2008, Proximedia SA took over the web agency Globule Bleu. The following year, Proximedia launched the brand BeUP. They were also elected ‘Enterprise of The Year 2009’ by Ernst & Young. Proximedia launched two new services in 2011: Videobiz and Promobook. In 2012, the Bizbook Channel was launched. Proximedia was acquired by Publicis Groupe S.A. in July 2014. == Branches == Proximedia Belgium: the oldest branch of the Proximedia Group. It makes websites and provides support for their customers. Similar branches are Proximedia France and Proximedia Nederland. Batibouw +: specialized in bringing contractors and clients together. Bizbook Channel: specialized in creating corporate videos for SMEs. Click+: offers the management of Google AdWords campaigns. This contains advertising in Google's search results. Globule Bleu: specialized in digital campaigns for larger companies or organisations. Online: an Internet Service Provider (ISP) that provides internet access, domain names, hosting of websites and data centers, email service, etc. Bizbook: an online guestbook where users can post reviews on products and services of a company. Promobook: an online service which can be used to print promotions and coupons. == Key figures == == Sale tactics and lawsuits == There are a lot of websites, forums and blogs that warn for Proximedia. This is because of the long duration of the contract, the inability to terminate the contract and the alleged aggressive approach of Proximedia and the alleged low quality of service that Proximedia offers. Also, there are a lot of lawsuits every month, some of which are customers that wish to terminate the contract, others that allege Proximedia of misguiding. List of some example lawsuits: Mitigation of contractual termination compensation on the basis of article 6:248 paragraph 2 of the Dutch Civil Code A clause on the basis of which a termination fee is claimed can be considered a penalty clause. Mitigation of the penalty based on article 6:94 of the Dutch Civil Code? Performance claim rejected; successful appeal to breach of contract; dissolution; restitution claim awarded. Agreement for IT services. Contents of the agreement. No reflex effect of the Door-to-Door Sales Act for small entrepreneurs. Implementation Act of the Consumer Rights Directive. Breach of contract? Unreasonably onerous clause? Cassation: ECLI:NL:HR:2016:996, (Partial) annulment with referral. Final judgment: ECLI:NL:GHSHE:2014:4228 Error. Reflex effect of the unfair commercial practices law? Compelling evidentiary force of written agreement. (No summary provided by court) Proximedia case. No valid defense against the claim concerning a number of monthly invoices. Article 7.1 of the agreement (containing a termination fee) is a general term in the sense of article 6:231 introductory text and under a of the Dutch Civil Code. No "reflex effect" of article 6:237 introductory text and under i of the Dutch Civil Code. Insufficiently argued why article 7.1 would be unreasonably onerous in the sense of article 6:233 of the Dutch Civil Code and that granting the claim would be unacceptable according to standards of reasonableness and fairness. Termination fee is not a penalty in the sense of article 6:91 of the Dutch Civil Code. A retailer (sole proprietorship) is approached by a representative of a company and enters into an "agreement for IT services" with a term of four years, which includes a dissolution fee of 60% of the not yet due monthly payments. The retailer is instructed to prove that, at the time of entering the agreement, the company promised him that he could terminate the agreement without any further obligations if he terminated his business. The retailer is considered to have succeeded in the burden of proof, and the company's claim for payment of the dissolution fee is rejected.