The Interim Measures for the Management of Generative AI Services (Chinese: 生成式人工智能服务管理暂行办法; pinyin: Shēngchéng shì réngōng zhìnéng fúwù guǎnlǐ zànxíng bànfǎ) are a set of regulations governing public-facing generative artificial intelligence services in China. Issued on 10 July 2023 and effective from 15 August 2023, they were China's first binding regulation specifically targeting generative AI. They have been described as among the earliest such regulations adopted by any country. The measures were jointly issued by the Cyberspace Administration of China (CAC) and six other national bodies: the National Development and Reform Commission, the Ministry of Education, the Ministry of Science and Technology, the Ministry of Industry and Information Technology, the Ministry of Public Security, and the National Radio and Television Administration. Among the measures' most prominent requirements is that generative AI services must uphold Core Socialist Values and must not generate content that could subvert state power, harm national security, or undermine social stability. The measures also require providers of public-facing generative AI services to undergo security assessments and register their algorithms with the CAC. As of December 2025, 748 generative AI services had completed the filing process at the national level. == Background == The Interim Measures build on two earlier sets of regulations targeting specific algorithm applications. The Administrative Provisions on Algorithm Recommendation for Internet Information Services, effective from March 2022, established China's algorithm registry and required providers of recommendation algorithms with "public opinion properties or social mobilization capabilities" to file with the CAC and undergo security assessments. The Administrative Provisions on Deep Synthesis of Internet Information Services, effective from January 2023, extended similar requirements to algorithms used for generating synthetic media such as deepfakes. In April 2023, the CAC released a draft of the generative AI regulation for public comment. The draft included several requirements that attracted attention, including that generated content should "embody Core Socialist Values" and that training data should be "true and accurate". The public consultation period ran until May 2023. The final version, published in July 2023, was substantially revised from the draft. According to an analysis by the Future of Privacy Forum, changes appeared to reflect feedback from industry stakeholders including Baidu, Xiaomi, SenseTime, and others, as well as input from government-affiliated research institutes. The final measures adopted a more permissive tone, with the CAC describing its approach as "inclusive and prudent" (包容审慎) and emphasising "classified and graded" (分类分级) supervision. == Scope == The measures apply to services that use generative AI technology to provide text, images, audio, video, or other content to the public within mainland China (Article 2). They do not apply to organisations that develop or use generative AI internally without offering services to the domestic public, such as industry associations, enterprises, and research institutions. Overseas providers whose services are accessible to users in China are also subject to the measures. == Key provisions == === Content requirements === Article 4 sets out the core content obligations. Providers and users of generative AI services must uphold the Core Socialist Values. The measures prohibit generating content that incites subversion of national sovereignty or the socialist system, endangers national security or the nation's image, incites separatism, promotes terrorism or extremism, promotes ethnic hatred or discrimination, or contains violence, obscenity, or false information prohibited by law. These content prohibitions largely mirror those in Article 12 of the Cybersecurity Law and in prior regulations governing online content. Article 4 also requires that models be designed and trained to avoid discrimination, that services respect intellectual property rights, and that providers take effective measures to improve the transparency and accuracy of generated content. === Training data and labelling === Article 7 requires providers to ensure that training data is of high quality and legitimately sourced, and that it does not infringe upon intellectual property rights. Where personal information is used, consent must be obtained. The final version of this provision removed language from the draft that would have held providers responsible for the "legitimacy" of all pretraining data, replacing it with a requirement to "employ effective measures to improve the quality of training data". Article 8 requires providers to establish labelling rules for training data and to conduct quality assessments of data annotations. Article 12 requires that generated images, videos, and other synthetic content be labelled as AI-generated. === User rights and privacy === Article 11 requires providers to protect user privacy, to minimise the collection and retention of personal data, and to refrain from unlawfully sharing user information. Users have the right to request review, correction, or deletion of their personal information. Article 10 requires providers to take measures to prevent excessive dependence on or addiction to generative AI services by minors. === Security assessment and algorithm filing === Article 17 requires that providers of generative AI services with "public opinion properties or the capacity for social mobilization" (具有舆论属性或者社会动员能力) carry out security assessments and complete algorithm filing procedures in accordance with the Administrative Provisions on Algorithm Recommendation for Internet Information Services. == Implementation == === Algorithm filing process === In practice, the filing requirements under the Interim Measures have developed into a two-tier process. The first tier is the standard algorithm filing (算法备案) under the pre-existing Algorithm Recommendation Provisions, which involves submitting information about an algorithm's design, purpose, and data sources to the CAC. This process is primarily a registration mechanism. For public-facing generative AI products, there is an additional, more rigorous process commonly referred to as the "large model filing" (大模型备案). This involves submitting a security self-assessment report, data annotation rules, a keyword blocking list, and evaluation test question sets. The process includes technical testing at the provincial level, followed by review at the national CAC level. The algorithm filing targets specific algorithms, while the large model filing evaluates the broader system architecture, training data, model parameters, and potential social impact. The CAC publishes lists of generative AI services that have successfully completed the filing process. The first such list was published on 2 April 2024. According to the CAC's year-end announcements, 302 generative AI services had completed national-level filing by the end of 2024 (of which 238 were new that year), alongside 105 applications that completed local-level registration. By the end of 2025, the cumulative total had risen to 748 national-level filings and 435 local-level registrations. === Content compliance and testing === According to the Carnegie Endowment, the CAC has conducted compliance audits of generative AI services with a particular focus on ensuring appropriate responses to queries about politically sensitive topics. The large model filing process requires providers to pass both provincial-level and national-level technical testing before their services can be made available to the public. On 1 March 2024, the National Technical Committee 260 on Cybersecurity (TC260) published TC260-003, the Basic Security Requirements for Generative AI Services (生成式人工智能服务安全基本要求), a technical standard that provides detailed guidance on the security assessments required under the Interim Measures. The standard covers requirements for training data safety, model security, and content safety evaluation, and is used as a reference for the filing process. == Analysis == === Relationship to broader Chinese internet regulation === The content requirements in the Interim Measures extend China's existing framework for online information control to generative AI. Legal scholars have noted that the "Core Socialist Values" provision and the specific content prohibitions are consistent with longstanding requirements imposed on internet platforms under the Cybersecurity Law and related regulations. The Asia Society Policy Institute has described the Chinese government's highest regulatory priority in this area as retaining control of information, noting that content-related obligations receive stricter enforcement than other provisions. === Nature of the filing system === The character of the filing system has been debated by scholars. Angela Huyue Zh
List of Haskell software and tools
This is a list of Haskell software and tools, including compilers, interpreters, build tools, package managers, integrated development environments, libraries, and other development utilities. == Compilers, interpreters and editors == Emacs — text editor Glasgow Haskell Compiler (GHC) Hugs — bytecode interpreter (discontinued) IntelliJ IDEA — IDE with Haskell support via plugins Vim — text editor Visual Studio Code — editor/IDE with Haskell support via extensions == Libraries and frameworks == Parsec — parser combinator library Servant — web framework Yesod — web framework == Build tools and package management == Cabal — build system and packaging infrastructure Haskell Platform — bundled distribution of Haskell tools and libraries (deprecated) Stack — build tool and dependency manager == Language tools and static analysis == Fourmolu — code formatter based on Ormolu Haskell Language Server — implementation of the Language Server Protocol for Haskell HLint — source code suggestion and linting tool Hoogle — Haskell API search engine Ormolu — code formatter Stan — static analysis tool Stylish Haskell — source code formatter == Interactive environments == GHCi — interactive REPL for the Glasgow Haskell Compiler IHaskell — Jupyter kernel for Haskell == Debugging and profiling tools == hp2ps — heap profiling visualization tool ThreadScope — parallel execution visualizer for Haskell programs == Documentation generators == Haddock — API documentation generator for Haskell == Parser and lexer generators == Alex — lexer generator for Haskell Happy — parser generator for Haskell == Testing frameworks == HUnit — unit testing framework QuickCheck — property-based testing library == Version control == Darcs — distributed version control system written in Haskell
Gen (software)
Gen is a Computer Aided Software Engineering (CASE) application development environment marketed by Broadcom Inc. Gen was previously known as CA Gen, IEF (Information Engineering Facility), Composer by IEF, Composer, COOL:Gen, Advantage:Gen and AllFusion Gen. The toolset originally supported the information technology engineering methodology developed by Clive Finkelstein, James Martin and others in the early 1980s. Early versions supported IBM's DB2 database, 3270 'block mode' screens and generated COBOL code. In the intervening years the toolset has been expanded to support additional development techniques such as component-based development; creation of client/server and web applications and generation of C, Java and C#. In addition, other platforms are now supported such as many variants of Unix-like Operating Systems (AIX, HP-UX, Solaris, Linux) as well as Windows. Its range of supported database technologies have widened to include ORACLE, Microsoft SQL Server, ODBC, JDBC as well as the original DB2. The toolset is fully integrated - objects identified during analysis carry forward into design without redefinition. All information is stored in a repository (central encyclopedia). The encyclopedia allows for large team development - controlling access so that multiple developers may not change the same object simultaneously. == History == === 1985-1997: Texas Instruments === It was initially produced by Texas Instruments, with input from James Martin and his consultancy firm James Martin Associates, and was based on the Information Engineering Methodology (IEM). The first version was launched in 1985. IEF (Information Engineering Facility) became popular among large government departments and public utilities. It initially supported a CICS/COBOL/DB2 target environment. However, it now supports a wider range of relational databases and operating systems. IEF was intended to shield the developer from the complexities of building complete multi-tier cross-platform applications. In 1995, Texas Instruments decided to change their marketing focus for the product. Part of this change included a new name - "Composer". By 1996, IEF had become a popular tool. However, it was criticized by some IT professionals for being too restrictive, as well as for having a high per-workstation cost ($15K USD). But it is claimed that IEF reduces development time and costs by removing complexity and allowing rapid development of large scale enterprise transaction processing systems. === 1997-2000: Sterling Software === In 1997, Composer had another change of branding, Texas Instruments sold the Texas Instruments Software division, including the Composer rights, to Sterling Software. Sterling software changed the well known name "Information Engineering Facility" to "COOL:Gen". COOL was an acronym for "Common Object Oriented Language" - despite the fact that there was little object orientation in the product. === 2000-2018: Computer Associates === In 2000, Sterling Software was acquired by Computer Associates (now CA). CA has rebranded the product three times to date and the product is still used widely today. Under CA, recent releases of the tool added support for the CA-Datacom DBMS, the Linux operating system, C# code generation and ASP.NET web clients. The current version is known as CA Gen - version 8 being released in May 2010, with support for customised web services, and more of the toolset being based around the Eclipse framework. === 2018-current: Broadcom === As of 2020, CA Gen is owned and marketed by Broadcom Inc., which rebranded the product to Gen to avoid confusion with the former owner of the product. There are a variety of "add-on" tools available for Gen, including GuardIEn - a Configuration Management and Developer Productivity Suite, QAT Wizard, an interview style wizard that takes advantage of the meta model in Gen, products for multi-platform application reporting and XML/SOAP enabling of Gen applications., and developer productivity tools such as Access Gen, APMConnect, QA Console and Upgrade Console from Response Systems Version 8.6 of CA Gen came to market in June 2016. Version 8.6.3 of CA Gen was released in 2021. Following this release, Broadcom have switched to a continuous delivery model with new features to be delivered as patches.
Ontology-based data integration
Ontology-based data integration involves the use of one or more ontologies to effectively combine data or information from multiple heterogeneous sources. It is one of the multiple data integration approaches and may be classified as Global-As-View (GAV). The effectiveness of ontology‑based data integration is closely tied to the consistency and expressivity of the ontology used in the integration process. == Background == Data from multiple sources are characterized by multiple types of heterogeneity. The following hierarchy is often used: Syntactic heterogeneity: is a result of differences in representation format of data Schematic or structural heterogeneity: the native model or structure to store data differ in data sources leading to structural heterogeneity. Schematic heterogeneity that particularly appears in structured databases is also an aspect of structural heterogeneity. Semantic heterogeneity: differences in interpretation of the 'meaning' of data are source of semantic heterogeneity System heterogeneity: use of different operating system, hardware platforms lead to system heterogeneity Ontologies, as formal models of representation with explicitly defined concepts and named relationships linking them, are used to address the issue of semantic heterogeneity in data sources. In domains like bioinformatics and biomedicine, the rapid development, adoption and public availability of ontologies [1] Archived 2007-06-16 at the Wayback Machine has made it possible for the data integration community to leverage them for semantic integration of data and information. == The role of ontologies == Ontologies enable the unambiguous identification of entities in heterogeneous information systems and assertion of applicable named relationships that connect these entities together. Specifically, ontologies play the following roles: Content Explication The ontology enables accurate interpretation of data from multiple sources through the explicit definition of terms and relationships in the ontology. Query Model In some systems like SIMS, the query is formulated using the ontology as a global query schema. Verification The ontology verifies the mappings used to integrate data from multiple sources. These mappings may either be user specified or generated by a system. == Approaches using ontologies for data integration == There are three main architectures that are implemented in ontology‑based data integration applications, namely, Single ontology approach A single ontology is used as a global reference model in the system. This is the simplest approach as it can be simulated by other approaches. SIMS is a prominent example of this approach. The Structured Knowledge Source Integration component of Research Cyc is another prominent example of this approach. (Title = Harnessing Cyc to Answer Clinical Researchers' Ad Hoc Queries). The Gellish Taxonomic Dictionary-Ontology follows this approach as well. Multiple ontologies Multiple ontologies, each modeling an individual data source, are used in combination for integration. Though, this approach is more flexible than the single ontology approach, it requires creation of mappings between the multiple ontologies. Ontology mapping is a challenging issue and is focus of large number of research efforts in computer science [2]. The OBSERVER system is an example of this approach. Hybrid approaches The hybrid approach involves the use of multiple ontologies that subscribe to a common, top-level vocabulary. The top-level vocabulary defines the basic terms of the domain. Thus, the hybrid approach makes it easier to use multiple ontologies for integration in presence of the common vocabulary.
Algorithms and Combinatorics
Algorithms and Combinatorics (ISSN 0937-5511) is a book series in mathematics, and particularly in combinatorics and the design and analysis of algorithms. It is published by Springer Science+Business Media, and was founded in 1987. == Books == The books published in this series include: The Simplex Method: A Probabilistic Analysis (Karl Heinz Borgwardt, 1987, vol. 1) Geometric Algorithms and Combinatorial Optimization (Martin Grötschel, László Lovász, and Alexander Schrijver, 1988, vol. 2; 2nd ed., 1993) Systems Analysis by Graphs and Matroids (Kazuo Murota, 1987, vol. 3) Greedoids (Bernhard Korte, László Lovász, and Rainer Schrader, 1991, vol. 4) Mathematics of Ramsey Theory (Jaroslav Nešetřil and Vojtěch Rödl, eds., 1990, vol. 5) Matroid Theory and its Applications in Electric Network Theory and in Statics (Andras Recszki, 1989, vol. 6) Irregularities of Partitions: Papers from the meeting held in Fertőd, July 7–11, 1986 (Gábor Halász and Vera T. Sós, eds., 1989, vol. 8) Paths, Flows, and VLSI-Layout: Papers from the meeting held at the University of Bonn, Bonn, June 20–July 1, 1988 (Bernhard Korte, László Lovász, Hans Jürgen Prömel, and Alexander Schrijver, eds., 1990, vol. 9) New Trends in Discrete and Computational Geometry (János Pach, ed., 1993, vol. 10) Discrete Images, Objects, and Functions in Z n {\displaystyle \mathbb {Z} ^{n}} (Klaus Voss, 1993, vol. 11) Linear Optimization and Extensions (Manfred Padberg, 1999, vol. 12) The Mathematics of Paul Erdős I (Ronald Graham and Jaroslav Nešetřil, eds., 1997, vol. 13) The Mathematics of Paul Erdős II (Ronald Graham and Jaroslav Nešetřil, eds., 1997, vol. 14) Geometry of Cuts and Metrics (Michel Deza and Monique Laurent, 1997, vol. 15) Probabilistic Methods for Algorithmic Discrete Mathematics (M. Habib, C. McDiarmid, J. Ramirez-Alfonsin, and B. Reed, 1998, vol. 16) Modern Cryptography, Probabilistic Proofs and Pseudorandomness (Oded Goldreich, 1999, vol. 17) Geometric Discrepancy: An Illustrated Guide (Jiří Matoušek, 1999, vol. 18) Applied Finite Group Actions (Adalbert Kerber, 1999, vol. 19) Matrices and Matroids for Systems Analysis (Kazuo Murota, 2000, vol. 20; corrected ed., 2010) Combinatorial Optimization (Bernhard Korte and Jens Vygen, 2000, vol. 21; 5th ed., 2012) The Strange Logic of Random Graphs (Joel Spencer, 2001, vol. 22) Graph Colouring and the Probabilistic Method (Michael Molloy and Bruce Reed, 2002, Vol. 23) Combinatorial Optimization: Polyhedra and Efficiency (Alexander Schrijver, 2003, vol. 24. In three volumes: A. Paths, flows, matchings; B. Matroids, trees, stable sets; C. Disjoint paths, hypergraphs) Discrete and Computational Geometry: The Goodman-Pollack Festschrift (B. Aronov, S. Basu, J. Pach, and M. Sharir, eds., 2003, vol. 25) Topics in Discrete Mathematics: Dedicated to Jarik Nešetril on the Occasion of his 60th birthday (M. Klazar, J. Kratochvíl, M. Loebl, J. Matoušek, R. Thomas, and P. Valtr, eds., 2006, vol. 26) Boolean Function Complexity: Advances and Frontiers (Stasys Jukna, 2012, Vol. 27) Sparsity: Graphs, Structures, and Algorithms (Jaroslav Nešetřil and Patrice Ossona de Mendez, 2012, vol. 28) Optimal Interconnection Trees in the Plane (Marcus Brazil and Martin Zachariasen, 2015, vol. 29) Combinatorics and Complexity of Partition Functions (Alexander Barvinok, 2016, vol. 30)
Convolutional neural network
A convolutional neural network (CNN) is a type of feedforward neural network that learns features via filter (or kernel) optimization. This type of deep learning network has been applied to process and make predictions from many different types of data including text, images and audio. CNNs are the de-facto standard in deep learning-based approaches to computer vision and image processing, and have only recently been replaced—in some cases—by newer architectures such as the transformer. Vanishing gradients and exploding gradients, seen during backpropagation in earlier neural networks, are prevented by the regularization that comes from using shared weights over fewer connections. For example, for each neuron in the fully-connected layer, 10,000 weights would be required for processing an image sized 100 × 100 pixels. However, applying cascaded convolution (or cross-correlation) kernels, only 25 weights for each convolutional layer are required to process 5x5-sized tiles. Higher-layer features are extracted from wider context windows, compared to lower-layer features. Some applications of CNNs include: image and video recognition, recommender systems, image classification, image segmentation, medical image analysis, natural language processing, brain–computer interfaces, and financial time series. CNNs are also known as shift invariant or space invariant artificial neural networks, based on the shared-weight architecture of the convolution kernels or filters that slide along input features and provide translation-equivariant responses known as feature maps. Counter-intuitively, most convolutional neural networks are not invariant to translation, due to the downsampling operation they apply to the input. Feedforward neural networks are usually fully connected networks, that is, each neuron in one layer is connected to all neurons in the next layer. The "full connectivity" of these networks makes them prone to overfitting data. Typical ways of regularization, or preventing overfitting, include: penalizing parameters during training (such as weight decay) or trimming connectivity (skipped connections, dropout, etc.) Robust datasets also increase the probability that CNNs will learn the generalized principles that characterize a given dataset rather than the biases of a poorly-populated set. Convolutional networks were inspired by biological processes in that the connectivity pattern between neurons resembles the organization of the animal visual cortex. Individual cortical neurons respond to stimuli only in a restricted region of the visual field known as the receptive field. The receptive fields of different neurons partially overlap such that they cover the entire visual field. CNNs use relatively little pre-processing compared to other image classification algorithms. This means that the network learns to optimize the filters (or kernels) through automated learning, whereas in traditional algorithms these filters are hand-engineered. This simplifies and automates the process, enhancing efficiency and scalability overcoming human-intervention bottlenecks. == Architecture == A convolutional neural network consists of an input layer, hidden layers and an output layer. In a convolutional neural network, the hidden layers include one or more layers that perform convolutions. Typically this includes a layer that performs a dot product of the convolution kernel with the layer's input matrix. This product is usually the Frobenius inner product, and its activation function is commonly ReLU. As the convolution kernel slides along the input matrix for the layer, the convolution operation generates a feature map, which in turn contributes to the input of the next layer. This is followed by other layers such as pooling layers, fully connected layers, and normalization layers. Here it should be noted how close a convolutional neural network is to a matched filter. === Convolutional layers === In a CNN, the input is a tensor with shape: (number of inputs) × (input height) × (input width) × (input channels) After passing through a convolutional layer, the image becomes abstracted to a feature map, also called an activation map, with shape: (number of inputs) × (feature map height) × (feature map width) × (feature map channels). Convolutional layers convolve the input and pass its result to the next layer. This is similar to the response of a neuron in the visual cortex to a specific stimulus. Each convolutional neuron processes data only for its receptive field. Although fully connected feedforward neural networks can be used to learn features and classify data, this architecture is generally impractical for larger inputs (e.g., high-resolution images), which would require massive numbers of neurons because each pixel is a relevant input feature. A fully connected layer for an image of size 100 × 100 has 10,000 weights for each neuron in the second layer. Convolution reduces the number of free parameters, allowing the network to be deeper. For example, using a 5 × 5 tiling region, each with the same shared weights, requires only 25 neurons. Using shared weights means there are many fewer parameters, which helps avoid the vanishing gradients and exploding gradients problems seen during backpropagation in earlier neural networks. To speed processing, standard convolutional layers can be replaced by depthwise separable convolutional layers, which are based on a depthwise convolution followed by a pointwise convolution. The depthwise convolution is a spatial convolution applied independently over each channel of the input tensor, while the pointwise convolution is a standard convolution restricted to the use of 1 × 1 {\displaystyle 1\times 1} kernels. === Pooling layers === Convolutional networks may include local and/or global pooling layers along with traditional convolutional layers. Pooling layers reduce the dimensions of data by combining the outputs of neuron clusters at one layer into a single neuron in the next layer. Local pooling combines small clusters, tiling sizes such as 2 × 2 are commonly used. Global pooling acts on all the neurons of the feature map. There are two common types of pooling in popular use: max and average. Max pooling uses the maximum value of each local cluster of neurons in the feature map, while average pooling takes the average value. === Fully connected layers === Fully connected layers connect every neuron in one layer to every neuron in another layer. It is the same as a traditional multilayer perceptron neural network (MLP). Each neuron in the fully connected layer receives input from all the neurons in the previous layer. These inputs are weighted and summed with the corresponding biases, and then passed through an activation function to perform a nonlinear transformation, generating the output. The flattened matrix goes through a fully connected layer to classify the images. === Receptive field === In neural networks, each neuron receives input from some number of locations in the previous layer. In a convolutional layer, each neuron receives input from only a restricted area of the previous layer called the neuron's receptive field. Typically the area is a square (e.g. 5 by 5 neurons). Whereas, in a fully connected layer, the receptive field is the entire previous layer. Thus, in each convolutional layer, each neuron takes input from a larger area in the input than previous layers. This is due to applying the convolution over and over, which takes the value of a pixel into account, as well as its surrounding pixels. When using dilated layers, the number of pixels in the receptive field remains constant, but the field is more sparsely populated as its dimensions grow when combining the effect of several layers. To manipulate the receptive field size as desired, there are some alternatives to the standard convolutional layer. For example, atrous or dilated convolution expands the receptive field size without increasing the number of parameters by interleaving visible and blind regions. Moreover, a single dilated convolutional layer can comprise filters with multiple dilation ratios, thus having a variable receptive field size. === Weights === Each neuron in a neural network computes an output value by applying a specific function to the input values received from the receptive field in the previous layer. The function that is applied to the input values is determined by a vector of weights and a bias (typically real numbers). Learning consists of iteratively adjusting these biases and weights. The vectors of weights and biases are called filters and represent particular features of the input (e.g., a particular shape). A distinguishing feature of CNNs is that many neurons can share the same filter. This reduces the memory footprint because a single bias and a single vector of weights are used across all receptive fields that share that filter, as opposed to each receptive field having its own bias and vector
OpenSMILE
openSMILE is source-available software for automatic extraction of features from audio signals and for classification of speech and music signals. "SMILE" stands for "Speech & Music Interpretation by Large-space Extraction". The software is mainly applied in the area of automatic emotion recognition and is widely used in the affective computing research community. The openSMILE project exists since 2008 and is maintained by the German company audEERING GmbH since 2013. openSMILE is provided free of charge for research purposes and personal use under a source-available license. For commercial use of the tool, the company audEERING offers custom license options. == Application Areas == openSMILE is used for academic research as well as for commercial applications in order to automatically analyze speech and music signals in real-time. In contrast to automatic speech recognition which extracts the spoken content out of a speech signal, openSMILE is capable of recognizing the characteristics of a given speech or music segment. Examples for such characteristics encoded in human speech are a speaker's emotion, age, gender, and personality, as well as speaker states like depression, intoxication, or vocal pathological disorders. The software further includes music classification technology for automatic music mood detection and recognition of chorus segments, key, chords, tempo, meter, dance-style, and genre. The openSMILE toolkit serves as benchmark in manifold research competitions such as Interspeech ComParE, AVEC, MediaEval, and EmotiW. == History == The openSMILE project was started in 2008 by Florian Eyben, Martin Wöllmer, and Björn Schuller at the Technical University of Munich within the European Union research project SEMAINE. The goal of the SEMAINE project was to develop a virtual agent with emotional and social intelligence. In this system, openSMILE was applied for real-time analysis of speech and emotion. The final SEMAINE software release is based on openSMILE version 1.0.1. In 2009, the emotion recognition toolkit (openEAR) was published based on openSMILE. "EAR" stands for "Emotion and Affect Recognition". In 2010, openSMILE version 1.0.1 was published and was introduced and awarded at the ACM Multimedia Open-Source Software Challenge. Between 2011 and 2013, the technology of openSMILE was extended and improved by Florian Eyben and Felix Weninger in the context of their doctoral thesis at the Technical University of Munich. The software was also applied for the project ASC-Inclusion, which was funded by the European Union. For this project, the software was extended by Erik Marchi in order to teach emotional expression to autistic children, based on automatic emotion recognition and visualization. In 2013, the company audEERING acquired the rights to the code-base from the Technical University of Munich and version 2.0 was published under a source-available research license. Until 2016, openSMILE was downloaded more than 50,000 times worldwide and has established itself as a standard toolkit for emotion recognition. == Awards == openSMILE was awarded in 2010 in the context of the ACM Multimedia Open Source Competition. The software tool is applied in numerous scientific publications on automatic emotion recognition. openSMILE and its extension openEAR have been cited in more than 1000 scientific publications until today.