Qstack

Qstack is a cloud management platform developed by GreenQloud, a cloud computing software company founded in Reykjavik, Iceland in February 2010. Qstack enables its users to manage multiple clouds and hybrid deployments through a single self-service portal. Qstack is in continuous development, incorporating developments within infrastructure, cloud, and application management solutions. The next release of Qstack is slated for June 2017. == History == In 2014 when Jonsi Stefansson joined as CEO, Greenqloud pivoted its operational focus to development of Qstack with beta launch in the fall of 2015, and began offering support, technical services and certifications for the software. == Features == Qstack is hypervisor agnostic (KVM, VMware, Hyper-V) and can manage private clouds in multiple locations as well as AWS, Azure, and EC2-compatible public clouds from its user interface. Qstack combines proprietary software with open-source components, and the company claims to harden them to meet the strict security standards often required by enterprise deployments. Qstack features VM templates for Windows, Linux, and other operating systems. It also features full SSH/RDP access to instances, virtual routers, firewalls, and load balancers built into the interface. == Reception == In a 2015 review, IDG columnist J. Peter Bruzzese praised Qstack’s user interface for its ease-of-use and clean look.

Film recorder

A film recorder is a graphical output device for transferring images to photographic film from a digital source. In a typical film recorder, an image is passed from a host computer to a mechanism to expose film through a variety of methods, historically by direct photography of a high-resolution cathode-ray tube (CRT) display. The exposed film can then be developed using conventional developing techniques, and displayed with a slide or motion picture projector. The use of film recorders predates the current use of digital projectors, which eliminate the time and cost involved in the intermediate step of transferring computer images to film stock, instead directly displaying the image signal from a computer. Motion picture film scanners are the opposite of film recorders, copying content from film stock to a computer system. Film recorders can be thought of as modern versions of kinescopes. == Design == === Operation === All film recorders typically work in the same manner. The image is fed from a host computer as a raster stream over a digital interface. A film recorder exposes film through various mechanisms; flying spot (early recorders); photographing a high resolution video monitor; electron beam recorder (Sony HDVS); a CRT scanning dot (Celco); focused beam of light from a light valve technology (LVT) recorder; a scanning laser beam (Arrilaser); or recently, full-frame LCD array chips. For color image recording on a CRT film recorder, the red, green, and blue channels are sequentially displayed on a single gray scale CRT, and exposed to the same piece of film as a multiple exposure through a filter of the appropriate color. This approach yields better resolution and color quality than possible with a tri-phosphor color CRT. The three filters are usually mounted on a motor-driven wheel. The filter wheel, as well as the camera's shutter, aperture, and film motion mechanism are usually controlled by the recorder's electronics and/or the driving software. CRT film recorders are further divided into analog and digital types. The analog film recorder uses the native video signal from the computer, while the digital type uses a separate display board in the computer to produce a digital signal for a display in the recorder. Digital CRT recorders provide a higher resolution at a higher cost compared to analog recorders due to the additional specialized hardware. Typical resolutions for digital recorders were quoted as 2K and 4K, referring to 2048×1366 and 4096×2732 pixels, respectively, while analog recorders provided a resolution of 640×428 pixels in comparison. Higher-quality LVT film recorders use a focused beam of light to write the image directly onto a film loaded spinning drum, one pixel at a time. In one example, the light valve was a liquid-crystal shutter, the light beam was steered with a lens, and text was printed using a pre-cut optical mask. The LVT will record pixel beyond grain. Some machines can burn 120-res or 120 lines per millimeter. The LVT is basically a reverse drum scanner. The exposed film is developed and printed by regular photographic chemical processing. === Formats === Film recorders are available for a variety of film types and formats. The 35 mm negative film and transparencies are popular because they can be processed by any photo shop. Single-image 4×5 film and 8×10 are often used for high-quality, large format printing. Some models have detachable film holders to handle multiple formats with the same camera or with Polaroid backs to provide on-site review of output before exposing film. == Uses == Film recorders are used in digital printing to generate master negatives for offset and other bulk printing processes. For preview, archiving, and small-volume reproduction, film recorders have been rendered obsolete by modern printers that produce photographic-quality hardcopies directly on plain paper. They are also used to produce the master copies of movies that use computer animation or other special effects based on digital image processing. However, most cinemas nowadays use Digital Cinema Packages on hard drives instead of film stock. === Computer graphics === Film recorders were among the earliest computer graphics output devices; for example, the IBM 740 CRT Recorder was announced in 1954. Film recorders were also commonly used to produce slides for slide projectors; but this need is now largely met by video projectors that project images directly from a computer to a screen. The terms "slide" and "slide deck" are still commonly used in presentation programs. === Current uses === Currently, film recorders are primarily used in the motion picture film-out process for the ever increasing amount of digital intermediate work being done. Although significant advances in large venue video projection alleviates the need to output to film, there remains a deadlock between the motion picture studios and theater owners over who should pay for the cost of these very costly projection systems. This, combined with the increase in international and independent film production, will keep the demand for film recording steady for at least a decade. == Key manufacturers == Traditional film recorder manufacturers have all but vanished from the scene or have evolved their product lines to cater to the motion picture industry. Dicomed was one such early provider of digital color film recorders. Polaroid, Management Graphics, Inc, MacDonald-Detwiler, Information International, Inc., and Agfa were other producers of film recorders. Arri is the only current major manufacturer of film recorders. Kodak Lightning I film recorder. One of the first laser recorders. Needed an engineering staff to set up. Kodak Lightning II film recorder used both gas and diode laser to record on to film. The last LVT machines produced by Kodak / Durst-Dice stopped production in 2002. There are no LVT film recorders currently being produced. LVT Saturn 1010 uses a LED exposure (RGB) to 8"x10" film at 1000-3000ppi. LUX Laser Cinema Recorder from Autologic/Information International in Thousand Oaks, California. Sales end in March 2000. Used on the 1997 film “Titanic”. Arri produces the Arrilaser line of laser-based motion picture film recorders. MGI produced the Solitaire line of CRT-based motion picture film recorders. Matrix, originally ImaPRO, a branch of Agfa Division, produced the QCR line of CRT-based motion picture film recorders. CCG, formerly Agfa film recorders, has been a steady manufacturer of film recorders based in Germany. In 2004 CCG introduced Definity, a motion picture film recorder utilizing LCD technology. In 2010 CCG introduced the first full LED LCD film recorder as a new step in film recording. Cinevator was made by Cinevation AS, in Drammen, Norway. The Cinevator was a real-time digital film recorder. It could record IN, IP and prints with and without sound Oxberry produced the Model 3100 film recorder camera system, with interchangeable pin-registered movements (shuttles) for 35 mm (full frame/Silent, 1.33:1) and 16 mm (regular 16, "2R"), and others have adapted the Oxberry movements for CinemaScope, 1.85:1, 1.75:1, 1.66:1, as well as Academy/Sound (1.37:1) in 35 mm and Super-16 in 16 mm ("1R"). For instance, the "Solitaire" and numerous others employed the Oxberry 3100 camera system. == History == Before video tape recorders or VTRs were invented, TV shows were either broadcast live or recorded to film for later showing, using the kinescope process. In 1967, CBS Laboratories introduced the Electronic Video Recording format, which used video and telecined-to-video film sources, which were then recorded with an electron-beam recorder at CBS' EVR mastering plant at the time to 35mm film stock in a rank of 4 strips on the film, which was then slit down to 4 8.75 mm (0.344 in) film copies, for playback in an EVR player. All types of CRT recorders were (and still are) used for film recording. Some early examples used for computer-output recording were the 1954 IBM 740 CRT Recorder, and the 1962 Stromberg-Carlson SC-4020, the latter using a Charactron CRT for text and vector graphic output to either 16 mm motion picture film, 16 mm microfilm, or hard-copy paper output. Later 1970 and 80s-era recording to B&W (and color, with 3 separate exposures for red, green, and blue)) 16 mm film was done with an EBR (Electron Beam Recorder), the most prominent examples made by 3M), for both video and COM (Computer Output Microfilm) applications. Image Transform in Universal City, California used specially modified 3M EBR film recorders that could perform color film-out recording on 16 mm by exposing three 16 mm frames in a row (one red, one green and one blue). The film was then printed to color 16 mm or 35 mm film. The video fed to the recorder could either be NTSC, PAL or SECAM. Later, Image Transform used specially modified VTRs to record 24 frame for their "Image Vision" system. The modified 1 inch type B videotape VTRs would record

Representer theorem

For computer science, in statistical learning theory, a representer theorem is any of several related results stating that a minimizer f ∗ {\displaystyle f^{}} of a regularized empirical risk functional defined over a reproducing kernel Hilbert space can be represented as a finite linear combination of kernel products evaluated on the input points in the training set data. == Formal statement == The following Representer Theorem and its proof are due to Schölkopf, Herbrich, and Smola: Theorem: Consider a positive-definite real-valued kernel k : X × X → R {\displaystyle k:{\mathcal {X}}\times {\mathcal {X}}\to \mathbb {R} } on a non-empty set X {\displaystyle {\mathcal {X}}} with a corresponding reproducing kernel Hilbert space H k {\displaystyle H_{k}} . Let there be given a training sample ( x 1 , y 1 ) , … , ( x n , y n ) ∈ X × R {\displaystyle (x_{1},y_{1}),\dotsc ,(x_{n},y_{n})\in {\mathcal {X}}\times \mathbb {R} } , a strictly increasing real-valued function g : [ 0 , ∞ ) → R {\displaystyle g\colon [0,\infty )\to \mathbb {R} } , and an arbitrary error function E : ( X × R 2 ) n → R ∪ { ∞ } {\displaystyle E\colon ({\mathcal {X}}\times \mathbb {R} ^{2})^{n}\to \mathbb {R} \cup \lbrace \infty \rbrace } , which together define the following regularized empirical risk functional on H k {\displaystyle H_{k}} : f ↦ E ( ( x 1 , y 1 , f ( x 1 ) ) , … , ( x n , y n , f ( x n ) ) ) + g ( ‖ f ‖ ) . {\displaystyle f\mapsto E\left((x_{1},y_{1},f(x_{1})),\ldots ,(x_{n},y_{n},f(x_{n}))\right)+g\left(\lVert f\rVert \right).} Then, any minimizer of the empirical risk f ∗ = argmin f ∈ H k { E ( ( x 1 , y 1 , f ( x 1 ) ) , … , ( x n , y n , f ( x n ) ) ) + g ( ‖ f ‖ ) } , ( ∗ ) {\displaystyle f^{}={\underset {f\in H_{k}}{\operatorname {argmin} }}\left\lbrace E\left((x_{1},y_{1},f(x_{1})),\ldots ,(x_{n},y_{n},f(x_{n}))\right)+g\left(\lVert f\rVert \right)\right\rbrace ,\quad ()} admits a representation of the form: f ∗ ( ⋅ ) = ∑ i = 1 n α i k ( ⋅ , x i ) , {\displaystyle f^{}(\cdot )=\sum _{i=1}^{n}\alpha _{i}k(\cdot ,x_{i}),} where α i ∈ R {\displaystyle \alpha _{i}\in \mathbb {R} } for all 1 ≤ i ≤ n {\displaystyle 1\leq i\leq n} . Proof: Define a mapping φ : X → H k φ ( x ) = k ( ⋅ , x ) {\displaystyle {\begin{aligned}\varphi \colon {\mathcal {X}}&\to H_{k}\\\varphi (x)&=k(\cdot ,x)\end{aligned}}} (so that φ ( x ) = k ( ⋅ , x ) {\displaystyle \varphi (x)=k(\cdot ,x)} is itself a map X → R {\displaystyle {\mathcal {X}}\to \mathbb {R} } ). Since k {\displaystyle k} is a reproducing kernel, then φ ( x ) ( x ′ ) = k ( x ′ , x ) = ⟨ φ ( x ′ ) , φ ( x ) ⟩ , {\displaystyle \varphi (x)(x')=k(x',x)=\langle \varphi (x'),\varphi (x)\rangle ,} where ⟨ ⋅ , ⋅ ⟩ {\displaystyle \langle \cdot ,\cdot \rangle } is the inner product on H k {\displaystyle H_{k}} . Given any x 1 , … , x n {\displaystyle x_{1},\ldots ,x_{n}} , one can use orthogonal projection to decompose any f ∈ H k {\displaystyle f\in H_{k}} into a sum of two functions, one lying in span ⁡ { φ ( x 1 ) , … , φ ( x n ) } {\displaystyle \operatorname {span} \left\lbrace \varphi (x_{1}),\ldots ,\varphi (x_{n})\right\rbrace } , and the other lying in the orthogonal complement: f = ∑ i = 1 n α i φ ( x i ) + v , {\displaystyle f=\sum _{i=1}^{n}\alpha _{i}\varphi (x_{i})+v,} where ⟨ v , φ ( x i ) ⟩ = 0 {\displaystyle \langle v,\varphi (x_{i})\rangle =0} for all i {\displaystyle i} . The above orthogonal decomposition and the reproducing property together show that applying f {\displaystyle f} to any training point x j {\displaystyle x_{j}} produces f ( x j ) = ⟨ ∑ i = 1 n α i φ ( x i ) + v , φ ( x j ) ⟩ = ∑ i = 1 n α i ⟨ φ ( x i ) , φ ( x j ) ⟩ , {\displaystyle f(x_{j})=\left\langle \sum _{i=1}^{n}\alpha _{i}\varphi (x_{i})+v,\varphi (x_{j})\right\rangle =\sum _{i=1}^{n}\alpha _{i}\langle \varphi (x_{i}),\varphi (x_{j})\rangle ,} which we observe is independent of v {\displaystyle v} . Consequently, the value of the error function E {\displaystyle E} in () is likewise independent of v {\displaystyle v} . For the second term (the regularization term), since v {\displaystyle v} is orthogonal to ∑ i = 1 n α i φ ( x i ) {\displaystyle \sum _{i=1}^{n}\alpha _{i}\varphi (x_{i})} and g {\displaystyle g} is strictly monotonic, we have g ( ‖ f ‖ ) = g ( ‖ ∑ i = 1 n α i φ ( x i ) + v ‖ ) = g ( ‖ ∑ i = 1 n α i φ ( x i ) ‖ 2 + ‖ v ‖ 2 ) ≥ g ( ‖ ∑ i = 1 n α i φ ( x i ) ‖ ) . {\displaystyle {\begin{aligned}g\left(\lVert f\rVert \right)&=g\left(\lVert \sum _{i=1}^{n}\alpha _{i}\varphi (x_{i})+v\rVert \right)\\&=g\left({\sqrt {\lVert \sum _{i=1}^{n}\alpha _{i}\varphi (x_{i})\rVert ^{2}+\lVert v\rVert ^{2}}}\right)\\&\geq g\left(\lVert \sum _{i=1}^{n}\alpha _{i}\varphi (x_{i})\rVert \right).\end{aligned}}} Therefore, setting v = 0 {\displaystyle v=0} does not affect the first term of (), while it strictly decreases the second term. Consequently, any minimizer f ∗ {\displaystyle f^{}} in () must have v = 0 {\displaystyle v=0} , i.e., it must be of the form f ∗ ( ⋅ ) = ∑ i = 1 n α i φ ( x i ) = ∑ i = 1 n α i k ( ⋅ , x i ) , {\displaystyle f^{}(\cdot )=\sum _{i=1}^{n}\alpha _{i}\varphi (x_{i})=\sum _{i=1}^{n}\alpha _{i}k(\cdot ,x_{i}),} which is the desired result. == Generalizations == The Theorem stated above is a particular example of a family of results that are collectively referred to as "representer theorems"; here we describe several such. The first statement of a representer theorem was due to Kimeldorf and Wahba for the special case in which E ( ( x 1 , y 1 , f ( x 1 ) ) , … , ( x n , y n , f ( x n ) ) ) = 1 n ∑ i = 1 n ( f ( x i ) − y i ) 2 , g ( ‖ f ‖ ) = λ ‖ f ‖ 2 {\displaystyle {\begin{aligned}E\left((x_{1},y_{1},f(x_{1})),\ldots ,(x_{n},y_{n},f(x_{n}))\right)&={\frac {1}{n}}\sum _{i=1}^{n}(f(x_{i})-y_{i})^{2},\\g(\lVert f\rVert )&=\lambda \lVert f\rVert ^{2}\end{aligned}}} for λ > 0 {\displaystyle \lambda >0} . Schölkopf, Herbrich, and Smola generalized this result by relaxing the assumption of the squared-loss cost and allowing the regularizer to be any strictly monotonically increasing function g ( ⋅ ) {\displaystyle g(\cdot )} of the Hilbert space norm. It is possible to generalize further by augmenting the regularized empirical risk functional through the addition of unpenalized offset terms. For example, Schölkopf, Herbrich, and Smola also consider the minimization f ~ ∗ = argmin ⁡ { E ( ( x 1 , y 1 , f ~ ( x 1 ) ) , … , ( x n , y n , f ~ ( x n ) ) ) + g ( ‖ f ‖ ) ∣ f ~ = f + h ∈ H k ⊕ span ⁡ { ψ p ∣ 1 ≤ p ≤ M } } , ( † ) {\displaystyle {\tilde {f}}^{}=\operatorname {argmin} \left\lbrace E\left((x_{1},y_{1},{\tilde {f}}(x_{1})),\ldots ,(x_{n},y_{n},{\tilde {f}}(x_{n}))\right)+g\left(\lVert f\rVert \right)\mid {\tilde {f}}=f+h\in H_{k}\oplus \operatorname {span} \lbrace \psi _{p}\mid 1\leq p\leq M\rbrace \right\rbrace ,\quad (\dagger )} i.e., we consider functions of the form f ~ = f + h {\displaystyle {\tilde {f}}=f+h} , where f ∈ H k {\displaystyle f\in H_{k}} and h {\displaystyle h} is an unpenalized function lying in the span of a finite set of real-valued functions { ψ p : X → R ∣ 1 ≤ p ≤ M } {\displaystyle \lbrace \psi _{p}\colon {\mathcal {X}}\to \mathbb {R} \mid 1\leq p\leq M\rbrace } . Under the assumption that the n × M {\displaystyle n\times M} matrix ( ψ p ( x i ) ) i p {\displaystyle \left(\psi _{p}(x_{i})\right)_{ip}} has rank M {\displaystyle M} , they show that the minimizer f ~ ∗ {\displaystyle {\tilde {f}}^{}} in ( † ) {\displaystyle (\dagger )} admits a representation of the form f ~ ∗ ( ⋅ ) = ∑ i = 1 n α i k ( ⋅ , x i ) + ∑ p = 1 M β p ψ p ( ⋅ ) {\displaystyle {\tilde {f}}^{}(\cdot )=\sum _{i=1}^{n}\alpha _{i}k(\cdot ,x_{i})+\sum _{p=1}^{M}\beta _{p}\psi _{p}(\cdot )} where α i , β p ∈ R {\displaystyle \alpha _{i},\beta _{p}\in \mathbb {R} } and the β p {\displaystyle \beta _{p}} are all uniquely determined. The conditions under which a representer theorem exists were investigated by Argyriou, Micchelli, and Pontil, who proved the following: Theorem: Let X {\displaystyle {\mathcal {X}}} be a nonempty set, k {\displaystyle k} a positive-definite real-valued kernel on X × X {\displaystyle {\mathcal {X}}\times {\mathcal {X}}} with corresponding reproducing kernel Hilbert space H k {\displaystyle H_{k}} , and let R : H k → R {\displaystyle R\colon H_{k}\to \mathbb {R} } be a differentiable regularization function. Then given a training sample ( x 1 , y 1 ) , … , ( x n , y n ) ∈ X × R {\displaystyle (x_{1},y_{1}),\ldots ,(x_{n},y_{n})\in {\mathcal {X}}\times \mathbb {R} } and an arbitrary error function E : ( X × R 2 ) m → R ∪ { ∞ } {\displaystyle E\colon ({\mathcal {X}}\times \mathbb {R} ^{2})^{m}\to \mathbb {R} \cup \lbrace \infty \rbrace } , a minimizer f ∗ = argmin f ∈ H k { E ( ( x 1 , y 1 , f ( x 1 ) ) , … , ( x n , y n , f ( x n ) ) ) + R ( f ) } ( ‡ ) {\displaystyle f^{}={\underset {f\in H_{k}}{\operatorname {argmin} }}\left\lbrace E\left((x_{1},y_{1},f(x_{1})),\ldots ,(x_{n},y_{n},f(x_{n}))\right)+R(f)\right\rbrace \quad (\ddagger )} of the regularized empirical risk admits a repr

Latent Dirichlet allocation

In natural language processing, latent Dirichlet allocation (LDA) is a generative statistical model that explains how a collection of text documents can be described by a set of unobserved "topics." For example, given a set of news articles, LDA might discover that one topic is characterized by words like "president", "government", and "election", while another is characterized by "team", "game", and "score". It is one of the most common topic models. The LDA model was first presented as a graphical model for population genetics by J. K. Pritchard, M. Stephens and P. Donnelly in 2000. The model was subsequently applied to machine learning by David Blei, Andrew Ng, and Michael I. Jordan in 2003. Although its most frequent application is in modeling text corpora, it has also been used for other problems, such as in clinical psychology, social science, and computational musicology. The core assumption of LDA is that documents are represented as a random mixture of latent topics, and each topic is characterized by a probability distribution over words. The model is a generalization of probabilistic latent semantic analysis (pLSA), differing primarily in that LDA treats the topic mixture as a Dirichlet prior, leading to more reasonable mixtures and less susceptibility to overfitting. Learning the latent topics and their associated probabilities from a corpus is typically done using Bayesian inference, often with methods like Gibbs sampling or variational Bayes. == History == In the context of population genetics, LDA was proposed by J. K. Pritchard, M. Stephens and P. Donnelly in 2000. LDA was applied in machine learning by David Blei, Andrew Ng and Michael I. Jordan in 2003. == Overview == === Population genetics === In population genetics, the model is used to detect the presence of structured genetic variation in a group of individuals. The model assumes that alleles carried by individuals under study have origin in various extant or past populations. The model and various inference algorithms allow scientists to estimate the allele frequencies in those source populations and the origin of alleles carried by individuals under study. The source populations can be interpreted ex-post in terms of various evolutionary scenarios. In association studies, detecting the presence of genetic structure is considered a necessary preliminary step to avoid confounding. === Clinical psychology, mental health, and social science === In clinical psychology research, LDA has been used to identify common themes of self-images experienced by young people in social situations. Other social scientists have used LDA to examine large sets of topical data from discussions on social media (e.g., tweets about prescription drugs). Additionally, supervised Latent Dirichlet Allocation with covariates (SLDAX) has been specifically developed to combine latent topics identified in texts with other manifest variables. This approach allows for the integration of text data as predictors in statistical regression analyses, improving the accuracy of mental health predictions. One of the main advantages of SLDAX over traditional two-stage approaches is its ability to avoid biased estimates and incorrect standard errors, allowing for a more accurate analysis of psychological texts. In the field of social sciences, LDA has proven to be useful for analyzing large datasets, such as social media discussions. For instance, researchers have used LDA to investigate tweets discussing socially relevant topics, like the use of prescription drugs and cultural differences in China. By analyzing these large text corpora, it is possible to uncover patterns and themes that might otherwise go unnoticed, offering valuable insights into public discourse and perception in real time. === Musicology === In the context of computational musicology, LDA has been used to discover tonal structures in different corpora. === Machine learning === One application of LDA in machine learning – specifically, topic discovery, a subproblem in natural language processing – is to discover topics in a collection of documents, and then automatically classify any individual document within the collection in terms of how "relevant" it is to each of the discovered topics. A topic is considered to be a set of terms (i.e., individual words or phrases) that, taken together, suggest a shared theme. For example, in a document collection related to pet animals, the terms dog, spaniel, beagle, golden retriever, puppy, bark, and woof would suggest a DOG_related theme, while the terms cat, siamese, Maine coon, tabby, manx, meow, purr, and kitten would suggest a CAT_related theme. There may be many more topics in the collection – e.g., related to diet, grooming, healthcare, behavior, etc. that we do not discuss for simplicity's sake. (Very common, so called stop words in a language – e.g., "the", "an", "that", "are", "is", etc., – would not discriminate between topics and are usually filtered out by pre-processing before LDA is performed. Pre-processing also converts terms to their "root" lexical forms – e.g., "barks", "barking", and "barked" would be converted to "bark".) If the document collection is sufficiently large, LDA will discover such sets of terms (i.e., topics) based upon the co-occurrence of individual terms, though the task of assigning a meaningful label to an individual topic (i.e., that all the terms are DOG_related) is up to the user, and often requires specialized knowledge (e.g., for collection of technical documents). The LDA approach assumes that: The semantic content of a document is composed by combining one or more terms from one or more topics. Certain terms are ambiguous, belonging to more than one topic, with different probability. (For example, the term training can apply to both dogs and cats, but are more likely to refer to dogs, which are used as work animals or participate in obedience or skill competitions.) However, in a document, the accompanying presence of specific neighboring terms (which belong to only one topic) will disambiguate their usage. Most documents will contain only a relatively small number of topics. In the collection, e.g., individual topics will occur with differing frequencies. That is, they have a probability distribution, so that a given document is more likely to contain some topics than others. Within a topic, certain terms will be used much more frequently than others. In other words, the terms within a topic will also have their own probability distribution. When LDA machine learning is employed, both sets of probabilities are computed during the training phase, using Bayesian methods and an expectation–maximization algorithm. LDA is a generalization of older approach of probabilistic latent semantic analysis (pLSA), The pLSA model is equivalent to LDA under a uniform Dirichlet prior distribution. pLSA relies on only the first two assumptions above and does not care about the remainder. While both methods are similar in principle and require the user to specify the number of topics to be discovered before the start of training (as with k-means clustering) LDA has the following advantages over pLSA: LDA yields better disambiguation of words and a more precise assignment of documents to topics. Computing probabilities allows a "generative" process by which a collection of new "synthetic documents" can be generated that would closely reflect the statistical characteristics of the original collection. Unlike LDA, pLSA is vulnerable to overfitting especially when the size of corpus increases. The LDA algorithm is more readily amenable to scaling up for large data sets using the MapReduce approach on a computing cluster. == Model == With plate notation, which is often used to represent probabilistic graphical models (PGMs), the dependencies among the many variables can be captured concisely. The boxes are "plates" representing replicates, which are repeated entities. The outer plate represents documents, while the inner plate represents the repeated word positions in a given document; each position is associated with a choice of topic and word. The variable names are defined as follows: M denotes the number of documents N is number of words in a given document (document i has N i {\displaystyle N_{i}} words) α is the parameter of the Dirichlet prior on the per-document topic distributions β is the parameter of the Dirichlet prior on the per-topic word distribution θ i {\displaystyle \theta _{i}} is the topic distribution for document i φ k {\displaystyle \varphi _{k}} is the word distribution for topic k z i j {\displaystyle z_{ij}} is the topic for the j-th word in document i w i j {\displaystyle w_{ij}} is the specific word. The fact that W is grayed out means that words w i j {\displaystyle w_{ij}} are the only observable variables, and the other variables are latent variables. As proposed in the original paper, a sparse Dirichlet prior can be used to model the to

Spatial Analysis of Principal Components

Spatial Principal Component Analysis (sPCA) is a multivariate statistical technique that complements the traditional Principal Component Analysis (PCA) by incorporating spatial information into the analysis of genetic variation. While traditional PCA can be used to find spatial patterns, it focuses on reducing data dimensionality by identifying uncorrelated principal components that capture maximum variance, thus often lacking power to identify non-trivial spatial genetic patterns. By accounting for spatial autocorrelation, sPCA is able to uncover spatial patterns in the data and find the spatial structure of datasets where observations are either geographically or topologically linked. This statistical power improvement allows the investigation of cryptic spatial patterns of genetic variability otherwise overlooked. sPCA has been applied in various fields, including geography, ecology and genetics. == History == sPCA was introduced in 2008 by Thibaut Jombart, Sébastien Devillard, Anne-Béatrice Dufour, and D. Pontier as a spatially explicit method to investigate the spatial pattern of genetic variation among individuals or populations. In 2017, Valeria Montano and Thibaut Jombart published an alternative non-parametric test to evaluate the significance of global and local spatial genetic patterns with improved statistical power. == Details == sPCA modifies the PCA framework by integrating spatial weights, typically in the form of connectivity matrices or spatial adjacency graphs. It identifies principal components (PCs) that maximize both genentic variance and spatial autocorreation, as measured by Moran's I. These weights represent relationships between observations based on geographic distance or other spatial criteria. The method decomposes variance into two components: Global structures, correspond to positive autocorrelation, that is, reflect broad-scale spatial patterns where similar values cluster over large regions. Local structures, correspond to negative autocorrelation, that is, capture fine-scale spatial variations or localized patterns. The core of sPCA relies on the eigenanalysis of a spatially weighted covariance or correlation matrix. The spatial weight matrix can be constructed using techniques such as Delaunay triangulation, nearest-neighbor graphs, or distance-based criteria. Applications of sPCA should be used only as an explorative tool. == Applications == sPCA has been widely used in many fields, including: Ecology: To find spatial patterns in species distributions and environmental gradients. Genetics: Population structure and gene flow analysis while allowing for spatial autocorrelation considerations. Biogeography: To identify historical dispersal routes, and barriers to gene flow, providing insights into species distribution patterns and evolutionary history. == Software/Source Code == sPCA implementations are available in R in adegenet and ntbox . These tools facilitate the application of sPCA by providing functions for constructing spatial weight matrices, performing eigenanalysis, and obtaining spatial principal components in an easy-to-read form.

Outline of automation

The following outline is provided as an overview of and topical guide to automation: Automation – use of control systems and information technologies to reduce the need for human work in the production of goods and services. In the scope of industrialization, automation is a step beyond mechanization. == Essence of automation == Control system – a device, or set of devices to manage, command, direct or regulate the behavior of other devices or systems. Industrial control system (ICS) – encompasses several types of control systems used in industrial production, including supervisory control and data acquisition (SCADA) systems, distributed control systems (DCS), and other smaller control system configurations such as skid-mounted programmable logic controllers (PLC) often found in industrial sectors and critical infrastructures. Industrialization – period of social and economic change that transforms a human group from an agrarian society into an industrial one. Numerical control (NC) – refers to the automation of machine tools that are operated by abstractly programmed commands encoded on a storage medium, as opposed to controlled manually via handwheels or levers, or mechanically automated via cams alone. Robotics – the branch of technology that deals with the design, construction, operation, structural disposition, manufacture and application of robots and computer systems for their control, sensory feedback, and information processing. == Branches of automation == === General purpose === Autonomous automation – autonomous software agents to adapt the controllers of computer controlled industrial machinery and processes Banking automation Broadcast automation Building automation – advanced functionality provided by the control system of a building. A building automation system (BAS) is an example of a distributed control system. Home automation – control system of a home. Office automation – the varied computer machinery and software used to digitally create, collect, store, manipulate, and relay office information needed for accomplishing basic tasks such as business process automation and robotic process automation. Console automation Database automation Integrated library system Laboratory automation === Specific purpose === Automated attendant Automated guided vehicle Autonomous mobile robot Automated highway system Automated pool cleaner Automated teller machine Automatic painting (robotic) Pop music automation Remotely operated vehicle Robotic lawn mower Telephone switchboard Vending machine == Fields contributing to automation == Cybernetics – the interdisciplinary study of the structure of regulatory systems. Cognitive science – interdisciplinary scientific study of the mind and its processes. It examines what cognition is, what it does and how it works. Robotics – the branch of technology that deals with the design, construction, operation, structural disposition, manufacture and application of robots and computer systems for their control, sensory feedback, and information processing. == History of automation == History of mass production – Prerequisites of mass production were interchangeable parts, machine tools and power, especially in the form of electricity. Mass production was popularized in the 1910s and 1920s by Henry Ford's Ford Motor Company, which introduced electric motors to the then-well-known technique of chain or sequential production. History of home automation == Automated machines == Machine to Machine OLE for process control (OPC) Process control – a statistics and engineering discipline that deals with architectures, mechanisms and algorithms for maintaining the output of a specific process within a desired range. Run Book Automation (RBA) Robot – a mechanical or virtual intelligent agent that can perform tasks automatically or with guidance, typically by remote control. == Automated machine components == Artificial intelligence – the intelligence of machines and the branch of computer science that aims to create it. Friendly artificial intelligence – an artificial intelligence that has a positive rather than negative effect on humanity, and the field of knowledge required to build such an artificial intelligence. === Automation tools === Artificial neural network (ANN) – mathematical model or computational model that is inspired by the structure or functional aspects of biological neural networks. Human machine interface (HMI) – operator level local control panel that monitors field devices Laboratory information management system (LIMS) – software package that offers a set of key features that support a modern laboratory's operations. Industrial control system – encompasses several types of control systems used in industrial production, including supervisory control and data acquisition (SCADA) systems, distributed control systems (DCS), and other smaller control system configurations such as skid-mounted programmable logic controllers (PLC) often found in the industrial sectors and critical infrastructures. Distributed control system (DCS) – control system usually of a manufacturing system, process or any kind of dynamic system, in which the controller elements are not central in location (like the brain) but are distributed throughout the system with each component sub-system controlled by one or more controllers. Manufacturing execution system (MES) – system that manages manufacturing operations in a factory, including management of resources, scheduling production processes, dispatching production orders, execution of production orders, etc. Programmable automation controller (PAC) – digital computer used for automation of electromechanical processes, such as control of machinery on factory assembly lines, amusement rides, or light fixtures. Programmable logic controller (PLC)A Programmable Logic Controller, PLC or Programmable Controller is a digital computer used for automation of electromechanical processes, such as control of machinery on factory assembly lines, amusement rides, or light fixtures. The abbreviation "PLC" and the term "Programmable Logic Controller" are registered trademarks of the Allen-Bradley Company (Rockwell Automation). PLCs are used in many industries and machines. Unlike general-purpose computers, the PLC is designed for multiple inputs and output arrangements, extended temperature ranges, immunity to electrical noise, and resistance to vibration and impact. Programs to control machine operation are typically stored in battery-backed-up or non-volatile memory. A PLC is an example of a hard real time system since output results must be produced in response to input conditions within a limited time, otherwise unintended operation will result. Supervisory control and data acquisition (SCADA) – generally refers to industrial control systems (ICS): computer systems that monitor and control industrial, infrastructure, or facility-based processes, as described below: Industrial processes include those of manufacturing, production, power generation, fabrication, and refining, and may run in continuous, batch, repetitive, or discrete modes. Simulation § Engineering Technology simulation or Process simulation == Social movements == Automation-related social movement – a movement that advocates semi- or fully automatic systems to provide for human needs globally. For example, automation of farming and food distribution throughout the world so that no one will go hungry. One goal is to automate all mundane labor, to free humans to engage in more creative activities (or less work). The Technocracy movement – social movement active from the Great Depression (1930s) to date that proposes replacing politicians and business people with scientists and engineers who have the technical expertise to manage the economy. The Zeitgeist Movement – movement advocating the replacement of the market economy with an economy in which all resources are equitably, commonly and sustainably shared. == Automation in the future == Android – a robot or synthetic organism designed to look and act like a human, and with a body having a flesh-like resemblance Technological singularity – the hypothetical future emergence of greater-than-human intelligence through technological means Semi-automation – using a centralized computer controller to orchestrate the activities of man and machine. == Automation-related publications == IEEE Spectrum – the flagship publication of the Institute of Electrical and Electronics Engineers (IEEE), explores the development, applications and implications of new technologies, and provides a forum for understanding, discussion and leadership in these areas. IEEE Transactions on Information Theory – peer-reviewed scientific journal published by the Institute of Electrical and Electronics Engineers (IEEE), focused on the study of information theory, the mathematics of communications, including computer communications, robotics communications, etc. IEEE Transactions on Control S

Amazon Rekognition

Amazon Rekognition is a cloud-based software as a service (SaaS) computer vision platform that was launched in 2016. It has been sold to, and used by, a number of United States government agencies, including U.S. Immigration and Customs Enforcement (ICE) and Orlando, Florida police, as well as private entities. == Capabilities == Rekognition provides a number of computer vision capabilities, which can be divided into two categories: Algorithms that are pre-trained on data collected by Amazon or its partners, and algorithms that a user can train on a custom dataset. As of July 2019, Rekognition provides the following computer vision capabilities. === Pre-trained algorithms === Celebrity recognition in images Facial attribute detection in images, including gender, age range, emotions (e.g. happy, calm, disgusted), whether the face has a beard or mustache, whether the face has eyeglasses or sunglasses, whether the eyes are open, whether the mouth is open, whether the person is smiling, and the location of several markers such as the pupils and jaw line. People Pathing enables tracking of people through a video. An advertised use-case of this capability is to track sports players for post-game analysis. Text detection and classification in images Unsafe visual content detection === Algorithms that a user can train on a custom dataset === SearchFaces enables users to import a database of images with pre-labeled faces, to train a machine learning model on this database, and to expose the model as a cloud service with an API. Then, the user can post new images to the API and receive information about the faces in the image. The API can be used to expose a number of capabilities, including identifying faces of known people, comparing faces, and finding similar faces in a database. Face-based user verification == History and use == === 2017 === In late 2017, the Washington County, Oregon Sheriff's Office began using Rekognition to identify suspects' faces. Rekognition was marketed as a general-purpose computer vision tool, and an engineer working for Washington County decided to use the tool for facial analysis of suspects. Rekognition was offered to the department for free, and Washington County became the first US law enforcement agency known to use Rekognition. In 2018, the agency logged over 1,000 facial searches. The county, according to the Washington Post, by 2019 was paying about $7 a month for all of its searches. The relationship was unknown to the public until May 2018. In 2018, Rekognition was also used to help identify celebrities during a royal wedding telecast. === 2018 === In April 2018, it was reported that FamilySearch was using Rekognition to enable their users to "see which of their ancestors they most resemble based on family photographs". In early 2018, the FBI also began using it as a pilot program for analyzing video surveillance. In May 2018, it was reported by the ACLU that Orlando, Florida was running a pilot using Rekognition for facial analysis in law enforcement, with that pilot ending in July 2019. After the report, on June 22, 2018, Gizmodo reported that Amazon workers had written a letter to CEO Jeff Bezos requesting he cease selling Rekognition to US law enforcement, particularly ICE and Homeland Security. A letter was also sent to Bezos by the ACLU. On June 26, 2018, it was reported that the Orlando police force had ceased using Rekognition after their trial contract expired, reserving the right to use it in the future. The Orlando Police Department said that they had "never gotten to the point to test images" due to old infrastructure and low bandwidth. In July 2018, the ACLU released a test showing that Rekognition had falsely matched 28 members of Congress with mugshot photos, particularly Congresspeople of color. 25 House members afterwards sent a letter to Bezos, expressing concern about Rekognition. Amazon responded saying the Rekognition test had generated 80 percent confidence, while it recommended law enforcement only use matches rated at 99 percent confidence. The Washington Post states that Oregon instead has officers pick a "best of five" result, instead of adhering to the recommendation. In September 2018, it was reported that Mapillary was using Rekognition to read the text on parking signs (e.g. no stopping, no parking, or specific parking hours) in cities. In October 2018, it was reported that Amazon had earlier that year pitched Rekognition to U.S. Immigration and Customs Enforcement agency. Amazon defended government use of Rekognition. On December 1, 2018, it was reported that 8 Democratic lawmakers had said in a letter that Amazon had "failed to provide sufficient answers" about Rekognition, writing that they had "serious concerns that this type of product has significant accuracy issues, places disproportionate burdens on communities of color, and could stifle Americans' willingness to exercise their First Amendment rights in public." === 2019 === In January 2019, MIT researchers published a peer-reviewed study asserting that Rekognition had more difficulty in identifying dark-skinned females than competitors such as IBM and Microsoft. In the study, Rekognition misidentified darker-skinned women as men 31% of the time, but made no mistakes for light-skinned men. Amazon called the report "misinterpreted results" of the research with an improper "default confidence threshold." In January 2019, Amazon's shareholders "urged Amazon to stop selling Rekognition software to law enforcement agencies." Amazon in response defended its use of Rekognition, but supported new federal oversight and guidelines to "make sure facial recognition technology cannot be used to discriminate." In February 2019, it was reported that Amazon was collaborating with the National Institute of Standards and Technology (NIST) on developing standardized tests to improve accuracy and remove bias with facial recognition. In March 2019, an open letter regarding Rekognition was sent by a group of prominent AI researchers to Amazon, criticizing its sale to law enforcement with around 50 signatures. In April 2019, Amazon was told by the Securities and Exchange Commission that they had to vote on two shareholder proposals seeking to limit Rekognition. Amazon argued that the proposals were an "insignificant public policy issue for the Company" not related to Amazon's ordinary business, but their appeal was denied. The vote was set for May. The first proposal was tabled by shareholders. On May 24, 2019, 2.4% of shareholders voted to stop selling Rekognition to government agencies, while a second proposal calling for a study into Rekognition and civil rights had 27.5% support. In August 2019, the ACLU again used Rekognition on members of government, with 26 of 120 lawmakers in California flagged as matches to mugshots. Amazon stated the ACLU was "misusing" the software in the tests, by not dismissing results that did not meet Amazon's recommended accuracy threshold of 99%. By August 2019, there had been protests against ICE's use of Rekognition to surveil immigrants. In March 2019, Amazon announced a Rekognition update that would improve emotional detection, and in August 2019, "fear" was added to emotions that Rekognition could detect. === 2020 === In June 2020, Amazon announced it was implementing a one-year moratorium on police use of Rekognition, in response to the George Floyd protests. === 2024 === The Department of Justice disclosed that the FBI is initiating the use of Amazon Rekognition. The DOJ's AI inventory revealed the FBI's "Project Tyr" aims to customize Rekognition to identify nudity, weapons, explosives, and other information from lawfully acquired media. === 2025 === In late 2025, the New York Times reported that scientist, Dr. Jürgen Matthäus, retired from as the head of research at the U.S. Holocaust Memorial Museum in Washington, D.C., used Amazon Rekognition to identify the shooter in the Holocaust photograph known as The Last Jew in Vinnitsa "with more than 99 percent certainty" — as Jakobus Onnen (1906–1943), a teacher from Tichelwarf near Weener in East Frisia who had been a member of the SS since 1934 and was later killed in action near Zhitomir in 1943. The photographer and victim remain unidentified. == Controversy regarding facial analysis == === Racial and gender bias === In 2018, MIT researchers Joy Buolamwini and Timnit Gebru published a study called Gender Shades. In this study, a set of images was collected, and faces in the images were labeled with face position, gender, and skin tone information. The images were run through SaaS facial recognition platforms from Face++, IBM, and Microsoft. In all three of these platforms, the classifiers performed best on male faces (with error rates on female faces being 8.1% to 20.6% higher than error rates on male faces), and they performed worst on dark female faces (with error rates ranging from 20.8% to 30.4%). The authors hypothesized that this discr