rCUDA, which stands for Remote CUDA, is a type of middleware software framework for remote GPU virtualization. Fully compatible with the CUDA application programming interface (API), it allows the allocation of one or more CUDA-enabled GPUs to a single application. Each GPU can be part of a cluster or running inside of a virtual machine. The approach is aimed at improving performance in GPU clusters that are lacking full utilization. GPU virtualization reduces the number of GPUs needed in a cluster, and in turn, leads to a lower cost configuration – less energy, acquisition, and maintenance. The recommended distributed acceleration architecture is a high performance computing cluster with GPUs attached to only a few of the cluster nodes. When a node without a local GPU executes an application needing GPU resources, remote execution of the kernel is supported by data and code transfers between local system memory and remote GPU memory. rCUDA is designed to accommodate this client-server architecture. On one end, clients employ a library of wrappers to the high-level CUDA Runtime API, and on the other end, there is a network listening service that receives requests on a TCP port. Several nodes running different GPU-accelerated applications can concurrently make use of the whole set of accelerators installed in the cluster. The client forwards the request to one of the servers, which accesses the GPU installed in that computer and executes the request in it. Time-multiplexing the GPU, or in other words sharing it, is accomplished by spawning different server processes for each remote GPU execution request. == rCUDA v20.07 == The rCUDA middleware enables the concurrent usage of CUDA-compatible devices remotely. rCUDA employs either the InfiniBand network or the socket API for the communication between clients and servers. rCUDA can be useful in three different environments: Clusters. To reduce the number of GPUs installed in High Performance Clusters. This leads to energy savings, as well as other related savings like acquisition costs, maintenance, space, cooling, etc. Academia. In commodity networks, to offer access to a few high performance GPUs concurrently to many students. Virtual Machines. To enable the access to the CUDA facilities on the physical machine. The current version of rCUDA (v20.07) supports CUDA version 9.0, excluding graphics interoperability. rCUDA v20.07 targets the Linux OS (for 64-bit architectures) on both client and server sides. CUDA applications do not need any change in their source code in order to be executed with rCUDA.
Mix automation
In music recording, mix automation allows the mixing console to remember the mixing engineer's dynamic adjustment of faders during a musical piece in the post-production editing process. A timecode is necessary for the synchronization of automation. Modern mixing consoles and digital audio workstations use comprehensive mix automation. The need for automated mixing originated from the late 1970s transition form 8-track to 16-track and then 24-track multitrack recording, as mixing could be laborious and require multiple people and hands, and the results could be almost impossible to reproduce. With 48-track recording - synchronized twin 24-track recorders (for a net 46 audio tracks, with one on each machine for SMPTE timecode) - came larger recording and mixing consoles with even more channel faders to manage during mixdown. Manufacturers, such as Neve Electronics (now AMS Neve) and Solid State Logic (SSL), both English companies, developed systems that enabled one engineer to oversee every detail of a complex mix, although the computers required to power these desks remained a rarity into the late 1970s. According to record producer Roy Thomas Baker, Queen's 1975 single "Bohemian Rhapsody" was one of the first mixes to be done with automation. == Types == Voltage Controlled Automation fader levels are regulated by voltage-controlled amplifiers (VCA). VCAs control the audio level and not the actual fader. Moving Fader Automation a motor is attached to the fader, which then can be controlled by the console, digital audio workstation (DAW), or user. Software Controlled Automation the software can be internal to the console, or external as part of a DAW. The virtual fader can be adjusted in the software by the user. MIDI Automation the communications protocol MIDI can be used to send messages to the console to control automation. == Modes == Auto Write used the first time automation is created or when writing over existing automation Auto Touch writes automation data only while a fader is touched/faders return to any previously automated position after release Auto Latch starts writing automation data when a fader is touched/stays in position after release Auto Read digital Audio Workstation performs the written automation Auto Off automation is temporarily disabled All of these include the mute button. If mute is pressed during writing of automation, the audio track will be muted during playback of that automation. Depending on software, other parameters such as panning, sends, and plug-in controls can be automated as well. In some cases, automation can be written using a digital potentiometer instead of a fader.
Dimensionality reduction
Dimensionality reduction, or dimension reduction, is the transformation of data from a high-dimensional space into a low-dimensional space so that the low-dimensional representation retains some meaningful properties of the original data, ideally close to its intrinsic dimension. Working in high-dimensional spaces can be undesirable for many reasons; raw data are often sparse as a consequence of the curse of dimensionality, and analyzing the data is usually computationally intractable. Dimensionality reduction is common in fields that deal with large numbers of observations and/or large numbers of variables, such as signal processing, speech recognition, neuroinformatics, and bioinformatics. Methods are commonly divided into linear and nonlinear approaches. Linear approaches can be further divided into feature selection and feature extraction. Dimensionality reduction can be used for noise reduction, data visualization, cluster analysis, or as an intermediate step to facilitate other analyses. == Feature selection == The process of feature selection aims to find a suitable subset of the input variables (features, or attributes) for the task at hand. The three strategies are: the filter strategy (e.g., information gain), the wrapper strategy (e.g., accuracy-guided search), and the embedded strategy (features are added or removed while building the model based on prediction errors). Data analysis such as regression or classification can be done in the reduced space more accurately than in the original space. == Feature projection == Feature projection (also called feature extraction) transforms the data from the high-dimensional space to a space of fewer dimensions. The data transformation may be linear, as in principal component analysis (PCA), but many nonlinear dimensionality reduction techniques also exist. For multidimensional data, tensor representation can be used in dimensionality reduction through multilinear subspace learning. === Principal component analysis (PCA) === The main linear technique for dimensionality reduction, principal component analysis, performs a linear mapping of the data to a lower-dimensional space in such a way that the variance of the data in the low-dimensional representation is maximized. In practice, the covariance (and sometimes the correlation) matrix of the data is constructed and the eigenvectors on this matrix are computed. The eigenvectors that correspond to the largest eigenvalues (the principal components) can now be used to reconstruct a large fraction of the variance of the original data. Moreover, the first few eigenvectors can often be interpreted in terms of the large-scale physical behavior of the system, because they often contribute the vast majority of the system's energy, especially in low-dimensional systems. Still, this must be proved on a case-by-case basis as not all systems exhibit this behavior. The original space (with dimension of the number of points) has been reduced (with data loss, but hopefully retaining the most important variance) to the space spanned by a few eigenvectors. === Non-negative matrix factorization (NMF) === NMF decomposes a non-negative matrix to the product of two non-negative ones, which has been a promising tool in fields where only non-negative signals exist, such as astronomy. NMF is well known since the multiplicative update rule by Lee & Seung, which has been continuously developed: the inclusion of uncertainties, the consideration of missing data and parallel computation, sequential construction which leads to the stability and linearity of NMF, as well as other updates including handling missing data in digital image processing. With a stable component basis during construction, and a linear modeling process, sequential NMF is able to preserve the flux in direct imaging of circumstellar structures in astronomy, as one of the methods of detecting exoplanets, especially for the direct imaging of circumstellar discs. In comparison with PCA, NMF does not remove the mean of the matrices, which leads to physical non-negative fluxes; therefore NMF is able to preserve more information than PCA as demonstrated by Ren et al. === Kernel PCA === Principal component analysis can be employed in a nonlinear way by means of the kernel trick. The resulting technique is capable of constructing nonlinear mappings that maximize the variance in the data. The resulting technique is called kernel PCA. === Graph-based kernel PCA === Other prominent nonlinear techniques include manifold learning techniques such as Isomap, locally linear embedding (LLE), Hessian LLE, Laplacian eigenmaps, and methods based on tangent space analysis. These techniques assume that the high-dimensional input data lies near a low-dimensional manifold embedded in the ambient space, and construct a low-dimensional representation using a cost function that retains local properties of the data; they can be viewed as defining a graph-based kernel for Kernel PCA. More recently, techniques have been proposed that, instead of defining a fixed kernel, try to learn the kernel using semidefinite programming. The most prominent example of such a technique is maximum variance unfolding (MVU). The central idea of MVU is to exactly preserve all pairwise distances between nearest neighbors (in the inner product space) while maximizing the distances between points that are not nearest neighbors. An alternative approach to neighborhood preservation is through the minimization of a cost function that measures differences between distances in the input and output spaces. Important examples of such techniques include: classical multidimensional scaling, which is identical to PCA; Isomap, which uses geodesic distances in the data space; diffusion maps, which use diffusion distances in the data space; t-distributed stochastic neighbor embedding (t-SNE), which minimizes the divergence between distributions over pairs of points; and curvilinear component analysis. A different approach to nonlinear dimensionality reduction is through the use of autoencoders, a special kind of feedforward neural networks with a bottleneck hidden layer. The training of deep encoders is typically performed using a greedy layer-wise pre-training (e.g., using a stack of restricted Boltzmann machines) that is followed by a finetuning stage based on backpropagation. === Linear discriminant analysis (LDA) === Linear discriminant analysis (LDA) is a generalization of Fisher's linear discriminant, a method used in statistics, pattern recognition, and machine learning to find a linear combination of features that characterizes or separates two or more classes of objects or events. === Generalized discriminant analysis (GDA) === GDA deals with nonlinear discriminant analysis using kernel function operator. The underlying theory is close to the support-vector machines (SVM) insofar as the GDA method provides a mapping of the input vectors into high-dimensional feature space. Similar to LDA, the objective of GDA is to find a projection for the features into a lower dimensional space by maximizing the ratio of between-class scatter to within-class scatter. === Autoencoder === Autoencoders can be used to learn nonlinear dimension reduction functions and codings together with an inverse function from the coding to the original representation. === t-SNE === T-distributed Stochastic Neighbor Embedding (t-SNE) is a nonlinear dimensionality reduction technique useful for the visualization of high-dimensional datasets. It is not recommended for use in analysis such as clustering or outlier detection since it does not necessarily preserve densities or distances well. === UMAP === Uniform manifold approximation and projection (UMAP) is a nonlinear dimensionality reduction technique. Visually, it is similar to t-SNE, but it assumes that the data is uniformly distributed on a locally connected Riemannian manifold and that the Riemannian metric is locally constant or approximately locally constant. == Dimension reduction == For high-dimensional datasets, dimension reduction is usually performed prior to applying a k-nearest neighbors (k-NN) algorithm in order to mitigate the curse of dimensionality. Feature extraction and dimension reduction can be combined in one step, using principal component analysis (PCA), linear discriminant analysis (LDA), canonical correlation analysis (CCA), or non-negative matrix factorization (NMF) techniques to pre-process the data, followed by clustering via k-NN on feature vectors in a reduced-dimension space. In machine learning, this process is also called low-dimensional embedding. For high-dimensional datasets (e.g., when performing similarity search on live video streams, DNA data, or high-dimensional time series), running a fast approximate k-NN search using locality-sensitive hashing, random projection, "sketches", or other high-dimensional similarity search techniques from the VLDB conference toolbox may be the only fe
Random forest
Random forests or random decision forests is an ensemble learning method for classification, regression and other tasks that works by creating a multitude of decision trees during training. For classification tasks, the output of the random forest is the class selected by most trees. For regression tasks, the output is the average of the predictions of the trees. Random forests correct for decision trees' habit of overfitting to their training set. The first algorithm for random decision forests was created in 1995 by Tin Kam Ho using the random subspace method, which, in Ho's formulation, is a way to implement the "stochastic discrimination" approach to classification proposed by Eugene Kleinberg. An extension of the algorithm was developed by Leo Breiman and Adele Cutler, who registered "Random Forests" as a trademark in 2006 (as of 2019, owned by Minitab, Inc.). The extension combines Breiman's "bagging" idea and random selection of features, introduced first by Ho and later independently by Amit and Geman in order to construct a collection of decision trees with controlled variance. == History == The general method of random decision forests was first proposed by Salzberg and Heath in 1993, with a method that used a randomized decision tree algorithm to create multiple trees and then combine them using majority voting. This idea was developed further by Ho in 1995. Ho established that forests of trees splitting with oblique hyperplanes can gain accuracy as they grow without suffering from overtraining, as long as the forests are randomly restricted to be sensitive to only selected feature dimensions. A subsequent work along the same lines concluded that other splitting methods behave similarly, as long as they are randomly forced to be insensitive to some feature dimensions. This observation that a more complex classifier (a larger forest) gets more accurate nearly monotonically is in sharp contrast to the common belief that the complexity of a classifier can only grow to a certain level of accuracy before being hurt by overfitting. The explanation of the forest method's resistance to overtraining can be found in Kleinberg's theory of stochastic discrimination. The early development of Breiman's notion of random forests was influenced by the work of Amit and Geman who introduced the idea of searching over a random subset of the available decisions when splitting a node, in the context of growing a single tree. The idea of random subspace selection from Ho was also influential in the design of random forests. This method grows a forest of trees, and introduces variation among the trees by projecting the training data into a randomly chosen subspace before fitting each tree or each node. Finally, the idea of randomized node optimization, where the decision at each node is selected by a randomized procedure, rather than a deterministic optimization was first introduced by Thomas G. Dietterich. The proper introduction of random forests was made in a paper by Leo Breiman, that has become one of the world's most cited papers. This paper describes a method of building a forest of uncorrelated trees using a CART like procedure, combined with randomized node optimization and bagging. In addition, this paper combines several ingredients, some previously known and some novel, which form the basis of the modern practice of random forests, in particular: Using out-of-bag error as an estimate of the generalization error. Measuring variable importance through permutation. The report also offers the first theoretical result for random forests in the form of a bound on the generalization error which depends on the strength of the trees in the forest and their correlation. == Algorithm == === Preliminaries: decision tree learning === Decision trees are a popular method for various machine learning tasks. Tree learning is almost "an off-the-shelf procedure for data mining", say Hastie et al., "because it is invariant under scaling and various other transformations of feature values, is robust to inclusion of irrelevant features, and produces inspectable models. However, they are seldom accurate". In particular, trees that are grown very deep tend to learn highly irregular patterns: they overfit their training sets, i.e. have low bias, but very high variance. Random forests are a way of averaging multiple deep decision trees, trained on different parts of the same training set, with the goal of reducing the variance. This comes at the expense of a small increase in the bias and some loss of interpretability, but generally greatly boosts the performance in the final model. === Bagging === The training algorithm for random forests applies the general technique of bootstrap aggregating, or bagging, to tree learners. Given a training set X = x1, ..., xn with responses Y = y1, ..., yn, bagging repeatedly (B times) selects a random sample with replacement of the training set and fits trees to these samples: After training, predictions for unseen samples x' can be made by averaging the predictions from all the individual regression trees on x': f ^ = 1 B ∑ b = 1 B f b ( x ′ ) {\displaystyle {\hat {f}}={\frac {1}{B}}\sum _{b=1}^{B}f_{b}(x')} or by taking the plurality vote in the case of classification trees. This bootstrapping procedure leads to better model performance because it decreases the variance of the model, without increasing the bias. This means that while the predictions of a single tree are highly sensitive to noise in its training set, the average of many trees is not, as long as the trees are not correlated. Simply training many trees on a single training set would give strongly correlated trees (or even the same tree many times, if the training algorithm is deterministic); bootstrap sampling is a way of de-correlating the trees by showing them different training sets. Additionally, an estimate of the uncertainty of the prediction can be made as the standard deviation of the predictions from all the individual regression trees on x′: σ = ∑ b = 1 B ( f b ( x ′ ) − f ^ ) 2 B − 1 . {\displaystyle \sigma ={\sqrt {\frac {\sum _{b=1}^{B}(f_{b}(x')-{\hat {f}})^{2}}{B-1}}}.} The number B of samples (equivalently, of trees) is a free parameter. Typically, a few hundred to several thousand trees are used, depending on the size and nature of the training set. B can be optimized using cross-validation, or by observing the out-of-bag error: the mean prediction error on each training sample xi, using only the trees that did not have xi in their bootstrap sample. The training and test error tend to level off after some number of trees have been fit. === From bagging to random forests === The above procedure describes the original bagging algorithm for trees. Random forests also include another type of bagging scheme: they use a modified tree learning algorithm that selects, at each candidate split in the learning process, a random subset of the features. This process is sometimes called "feature bagging". The reason for doing this is the correlation of the trees in an ordinary bootstrap sample: if one or a few features are very strong predictors for the response variable (target output), these features will be selected in many of the B trees, causing them to become correlated. An analysis of how bagging and random subspace projection contribute to accuracy gains under different conditions is given by Ho. Typically, for a classification problem with p {\displaystyle p} features, p {\displaystyle {\sqrt {p}}} (rounded down) features are used in each split. For regression problems the inventors recommend p / 3 {\displaystyle p/3} (rounded down) with a minimum node size of 5 as the default. In practice, the best values for these parameters should be tuned on a case-to-case basis for every problem. === ExtraTrees === Adding one further step of randomization yields extremely randomized trees, or ExtraTrees. As with ordinary random forests, they are an ensemble of individual trees, but there are two main differences: (1) each tree is trained using the whole learning sample (rather than a bootstrap sample), and (2) the top-down splitting is randomized: for each feature under consideration, a number of random cut-points are selected, instead of computing the locally optimal cut-point (based on, e.g., information gain or the Gini impurity). The values are chosen from a uniform distribution within the feature's empirical range (in the tree's training set). Then, of all the randomly chosen splits, the split that yields the highest score is chosen to split the node. Similar to ordinary random forests, the number of randomly selected features to be considered at each node can be specified. Default values for this parameter are p {\displaystyle {\sqrt {p}}} for classification and p {\displaystyle p} for regression, where p {\displaystyle p} is the number of features in the model. === Random forests for high-dimensional data === The basic random forest procedure may
Latent Dirichlet allocation
In natural language processing, latent Dirichlet allocation (LDA) is a generative statistical model that explains how a collection of text documents can be described by a set of unobserved "topics." For example, given a set of news articles, LDA might discover that one topic is characterized by words like "president", "government", and "election", while another is characterized by "team", "game", and "score". It is one of the most common topic models. The LDA model was first presented as a graphical model for population genetics by J. K. Pritchard, M. Stephens and P. Donnelly in 2000. The model was subsequently applied to machine learning by David Blei, Andrew Ng, and Michael I. Jordan in 2003. Although its most frequent application is in modeling text corpora, it has also been used for other problems, such as in clinical psychology, social science, and computational musicology. The core assumption of LDA is that documents are represented as a random mixture of latent topics, and each topic is characterized by a probability distribution over words. The model is a generalization of probabilistic latent semantic analysis (pLSA), differing primarily in that LDA treats the topic mixture as a Dirichlet prior, leading to more reasonable mixtures and less susceptibility to overfitting. Learning the latent topics and their associated probabilities from a corpus is typically done using Bayesian inference, often with methods like Gibbs sampling or variational Bayes. == History == In the context of population genetics, LDA was proposed by J. K. Pritchard, M. Stephens and P. Donnelly in 2000. LDA was applied in machine learning by David Blei, Andrew Ng and Michael I. Jordan in 2003. == Overview == === Population genetics === In population genetics, the model is used to detect the presence of structured genetic variation in a group of individuals. The model assumes that alleles carried by individuals under study have origin in various extant or past populations. The model and various inference algorithms allow scientists to estimate the allele frequencies in those source populations and the origin of alleles carried by individuals under study. The source populations can be interpreted ex-post in terms of various evolutionary scenarios. In association studies, detecting the presence of genetic structure is considered a necessary preliminary step to avoid confounding. === Clinical psychology, mental health, and social science === In clinical psychology research, LDA has been used to identify common themes of self-images experienced by young people in social situations. Other social scientists have used LDA to examine large sets of topical data from discussions on social media (e.g., tweets about prescription drugs). Additionally, supervised Latent Dirichlet Allocation with covariates (SLDAX) has been specifically developed to combine latent topics identified in texts with other manifest variables. This approach allows for the integration of text data as predictors in statistical regression analyses, improving the accuracy of mental health predictions. One of the main advantages of SLDAX over traditional two-stage approaches is its ability to avoid biased estimates and incorrect standard errors, allowing for a more accurate analysis of psychological texts. In the field of social sciences, LDA has proven to be useful for analyzing large datasets, such as social media discussions. For instance, researchers have used LDA to investigate tweets discussing socially relevant topics, like the use of prescription drugs and cultural differences in China. By analyzing these large text corpora, it is possible to uncover patterns and themes that might otherwise go unnoticed, offering valuable insights into public discourse and perception in real time. === Musicology === In the context of computational musicology, LDA has been used to discover tonal structures in different corpora. === Machine learning === One application of LDA in machine learning – specifically, topic discovery, a subproblem in natural language processing – is to discover topics in a collection of documents, and then automatically classify any individual document within the collection in terms of how "relevant" it is to each of the discovered topics. A topic is considered to be a set of terms (i.e., individual words or phrases) that, taken together, suggest a shared theme. For example, in a document collection related to pet animals, the terms dog, spaniel, beagle, golden retriever, puppy, bark, and woof would suggest a DOG_related theme, while the terms cat, siamese, Maine coon, tabby, manx, meow, purr, and kitten would suggest a CAT_related theme. There may be many more topics in the collection – e.g., related to diet, grooming, healthcare, behavior, etc. that we do not discuss for simplicity's sake. (Very common, so called stop words in a language – e.g., "the", "an", "that", "are", "is", etc., – would not discriminate between topics and are usually filtered out by pre-processing before LDA is performed. Pre-processing also converts terms to their "root" lexical forms – e.g., "barks", "barking", and "barked" would be converted to "bark".) If the document collection is sufficiently large, LDA will discover such sets of terms (i.e., topics) based upon the co-occurrence of individual terms, though the task of assigning a meaningful label to an individual topic (i.e., that all the terms are DOG_related) is up to the user, and often requires specialized knowledge (e.g., for collection of technical documents). The LDA approach assumes that: The semantic content of a document is composed by combining one or more terms from one or more topics. Certain terms are ambiguous, belonging to more than one topic, with different probability. (For example, the term training can apply to both dogs and cats, but are more likely to refer to dogs, which are used as work animals or participate in obedience or skill competitions.) However, in a document, the accompanying presence of specific neighboring terms (which belong to only one topic) will disambiguate their usage. Most documents will contain only a relatively small number of topics. In the collection, e.g., individual topics will occur with differing frequencies. That is, they have a probability distribution, so that a given document is more likely to contain some topics than others. Within a topic, certain terms will be used much more frequently than others. In other words, the terms within a topic will also have their own probability distribution. When LDA machine learning is employed, both sets of probabilities are computed during the training phase, using Bayesian methods and an expectation–maximization algorithm. LDA is a generalization of older approach of probabilistic latent semantic analysis (pLSA), The pLSA model is equivalent to LDA under a uniform Dirichlet prior distribution. pLSA relies on only the first two assumptions above and does not care about the remainder. While both methods are similar in principle and require the user to specify the number of topics to be discovered before the start of training (as with k-means clustering) LDA has the following advantages over pLSA: LDA yields better disambiguation of words and a more precise assignment of documents to topics. Computing probabilities allows a "generative" process by which a collection of new "synthetic documents" can be generated that would closely reflect the statistical characteristics of the original collection. Unlike LDA, pLSA is vulnerable to overfitting especially when the size of corpus increases. The LDA algorithm is more readily amenable to scaling up for large data sets using the MapReduce approach on a computing cluster. == Model == With plate notation, which is often used to represent probabilistic graphical models (PGMs), the dependencies among the many variables can be captured concisely. The boxes are "plates" representing replicates, which are repeated entities. The outer plate represents documents, while the inner plate represents the repeated word positions in a given document; each position is associated with a choice of topic and word. The variable names are defined as follows: M denotes the number of documents N is number of words in a given document (document i has N i {\displaystyle N_{i}} words) α is the parameter of the Dirichlet prior on the per-document topic distributions β is the parameter of the Dirichlet prior on the per-topic word distribution θ i {\displaystyle \theta _{i}} is the topic distribution for document i φ k {\displaystyle \varphi _{k}} is the word distribution for topic k z i j {\displaystyle z_{ij}} is the topic for the j-th word in document i w i j {\displaystyle w_{ij}} is the specific word. The fact that W is grayed out means that words w i j {\displaystyle w_{ij}} are the only observable variables, and the other variables are latent variables. As proposed in the original paper, a sparse Dirichlet prior can be used to model the to
DAvE (Infineon)
DAVE, or Digital Application Virtual Engineer, is a software development and code generation tool for microcontroller applications created in C/C++. == Versions == === Version 4 (beta) === The successor of the Eclipse-based development environment for C/C++ and/or graphical user interface (GUI) based development using application software (apps). It generates code for the latest XMC1xxx and XMC4xxx microcontrollers using ARM Cortex-M processors. DAVE software development kit (SDK) is a free integrated development environment to set up its own apps for DAVE. === Version 3 === Automatic code generation is based on the use of case-oriented, configurable, and tested software (SW) components, called DAVE Apps. They are comparable to executable and configurable application notes that can be downloaded from the web. The environment is based on Eclipse. Ordinary program development using C/C++ is also available. The targets for this development are XMC1xxx and XMC4xxx microcontrollers that use Cortex-M processors. === Previous versions === This version targets 32-bit microcontroller units (MCUs) (Infineon TriCore AUDO family), 16-bit MCUs (C166, XC166, XE166, and XC2000 family), and 8-bit MCUs (XC800 family) from Infineon. After the initial setup, the configuration wizard appears and gives an overview of the hardware peripherals, control units, and modules. The microcontroller application can be created by selecting the desired functions. At this step, module-specific functions must be selected for module initializing and control. Finally, the application source files will be generated by DAVE and embedded in a project in the selected development environment, where the code can still be modified or added to an extant project. == DAVE-related software == Infineon also developed additional software that can be used in conjunction with DAVE for specific microcontroller families or additional hardware: DAVE Bench for XC800 is a platform providing free development tools for Infineon's 8-bit microcontroller family, based on the Open Source Eclipse architecture. DAVE Drive is a GUI-based software tool that allows application developers to create embedded software for the control of brushless synchronous three-phase motors. == Alternative software == The Infineon MCUs are directly supported by several commercial products, depending on the selected MCU target. An embedded programming library for MATLAB exists. As a free alternative to DAVE, the developer can use the Keil Microcontroller Development Kit (MDK) Version 5. Code for the XMX1000 series up to 128 kB can be developed this way without purchasing a license from Keil.
Witness set
In combinatorics and computational learning theory, a witness set is a set of elements that distinguishes a given Boolean function from a given class of other Boolean functions. Let C {\displaystyle C} be a concept class over a domain X {\displaystyle X} (that is, a family of Boolean functions over X {\displaystyle X} ) and c {\displaystyle c} be a concept in X {\displaystyle X} (a single Boolean function). A subset S {\displaystyle S} of X {\displaystyle X} is a witness set for c {\displaystyle c} in X {\displaystyle X} if S {\displaystyle S} distinguishes c {\displaystyle c} from all the other functions in C {\displaystyle C} , in the sense that no other function in C {\displaystyle C} has the same values on S {\displaystyle S} . For a concept class with | C | {\displaystyle |C|} concepts, there exists a concept that has a witness of size at most log 2 | C | {\displaystyle \log _{2}|C|} ; this bound is tight when C {\displaystyle C} consists of all Boolean functions over X {\displaystyle X} . By a result of Bondy (1972) there exists a single witness set of size at most | C | − 1 {\displaystyle |C|-1} that is valid for all concepts in C {\displaystyle C} ; this bound is tight when C {\displaystyle C} consists of the indicator functions of the empty set and some singleton sets. One way to construct this set is to interpret the concepts as bitstrings, and the domain elements as positions in these bitstrings. Then the set of positions at which a trie of the bitstrings branches forms the desired witness set. This construction is central to the operation of the fusion tree data structure. The minimum size of a witness set for c {\displaystyle c} is called the witness size or specification number and is denoted by w C ( c ) {\displaystyle w_{C}(c)} . The value max { w C ( c ) : c ∈ C } {\displaystyle \max\{w_{C}(c):c\in C\}} is called the teaching dimension of C {\displaystyle C} . It represents the number of examples of a concept that need to be presented by a teacher to a learner, in the worst case, to enable the learner to determine which concept is being presented. Witness sets have also been called teaching sets, keys, specifying sets, or discriminants. The "witness set" terminology is from Kushilevitz et al. (1996), who trace the concept of witness sets to work by Cover (1965).