Air Force Network (AFNet) is an Indian Air Force (IAF) owned, operated and managed digital information grid. The AFNet replaces the Indian Air Force's (IAF) old communication network set-up using the tropo-scatter technology of the 1950s making it a true net-centric combat force. The IAF project is part of the overall mission to network all three services; The Indian Army, The Indian Navy and The Indian Air Force. The former Defence Minister AK Antony inaugurated the IAF's the AFNET on 14 September 2010 dedicating it to the people of India, for their direct or indirect participation in the communication revolution. == Background == Armed Forces in India has been using troposcatters as primary means of military communications since the 1950s, thereby occupying huge and expensive 2G and 3G spectrums which otherwise could have been used for expanding and de-clogging the civilian wireless communication network. The rapid expansion of civilian mobile telephony leading to need for larger bandwidth for wireless communication and commercial need to operate the 3G network necessitated the Government of India to have the Indian Armed Forces vacate the spectrum occupied by them. Thus the government of India through Department of Telecommunication (DoT) started a project called "Network for Spectrum" to set up a fiber optics network for the exclusive use of Indian Armed Forces in exchange for spectrum being released by the Defence Forces. The aim of 'Network for Spectrum' being twofold - to facilitate the growth of national tele-density on the one hand, and ensuring modernization of defence communications with the state-of-the-art communication infrastructure, and to support net-centric military operations. The Department of Telecom and the Ministry of Defence signed the memorandum of understanding for vacating the spectrum and setting up dedicated network for the use of defence forces. In this MoU, DoT agreed to laying of 40,000 route kilometres of optical fibre cable connecting 219 Army stations, 33 Navy stations and 162 points for the Air Force. It further agreed to setting up an exclusive defence band and Defence Interest Zone along 100 km of the international border, where spectrum will be reserved only for use by the Armed Forces. The total cost of implementing "Network for Spectrum" project is estimated to be ₹ 10,000 crores. AFNet is Indian Air Force component of Digital Information Grid under "Network for Spectrum" project and the AFNet has been extended and connected to the Digital Information Grid Project under implementation for the Indian Navy and the Indian Army on 2015. == Project Origin == The Air Force Network (AFNet) had been developed by the Indian Air Force at a cost of ₹1,077 crore (US$235.53 million) in collaboration with HCL Technologies and Bharat Sanchar Nigam Limited. It will replace the Air Force's more than half-a-century-old telecom network. This project is part of the defence ministry's initiative to digitize the communication systems of the three armed forces under "Network for Spectrum" initiative to improve coordination among themselves and other Military and Strategic Institution. IAF was the first to complete this gigabyte digital information grid implemented under the AFNet project. AFNet will be connected and extended to a Unified Digital Grid encompassing all the legs of Indian Armed Forces. The then defence minister, A. K. Antony, inaugurated the AFNet, IAF's gigabyte digital information grid. The grid is aimed at improving the network-centric warfare capability of the Air Force. The event also saw the presence of other personalities including the then Minister of Communication & IT, A. Raja; the Marshal of the Air Force, Arjan Singh; the Chief of the Air Staff, the Chief of the Army Staff and other officials from the three services and members of the Industry. The event also featured a practice interception of a simulated aerial target by a MiG-29 which took off from an airbase in the Punjab sector using the AFNet capabilities. Further capabilities in line with network centric warfare were also demonstrated. This included sharing information, videos and pictures by operational assets and platforms like UAVs and AWACS to decision-makers who are several hundred kilometres apart. == Technology, Design & Structure == AFNet incorporates the latest traffic transportation technology in form of Internet Protocol (IP) packets over the network using Multiprotocol Label Switching (MPLS). A large Voice over Internet Protocol (VoIP) layer with stringent quality of service enforcement will facilitate robust, high quality voice, video and conferencing solutions. AFNet will prove to be an effective force multiplier for intelligence analysis, mission planning and control, post-mission feedback and related activities like maintenance, logistics and administration. A comprehensive design with multi-layer security precautions for “Defence in Depth” have been planned by incorporating encryption technologies, Intrusion Prevention Systems to ensure the resistance of the IT system against information manipulation and eavesdropping. The network is secured with a host of advanced state-of-the-art encryption technologies. It is designed for high reliability with redundancy built into the network design itself. The AFNet is also capable of transmitting video from unmanned surveillance aircraft (UAV), pictures from airborne warning and control systems (AWACS) to decision makers on the ground and providing intelligence inputs from remote areas. The AFNet is also expected to facilitate accelerated economic growth by providing radio frequency spectrum for telecommunication purposes. AFNET will be the largest Multi-protocol Label Switching (MPLS) network in the defence segment. == Demonstration == At the AFNet launch, the IAF showcased a practice interception of simulated enemy targets by a pair of Mig-29 fighter aircraft airborne from an advanced airbase in the Punjab sector using the gigabyte digital information grid. During the AFNet-assisted operations, the Indian fighter jets neutralised intruding targets in the western sector, which was played out live on the giant screens at the Air Force auditorium offering a glimpse of the harnessed potential of the system. The final orders for engaging the enemy targets were issued live by Antony, whose queries about how the operation went were responded to by the pilot as "excellent". Various other functionalities contributing towards Network Centric Warfare were also showcased. These consisted of facilitating video from Unmanned Aerial Vehicle (UAV), pictures from an AWACS aircraft to the decision-makers on ground sitting hundreds of kilometres away, providing intelligence inputs from far-flung areas at central locations seamlessly. This was possible mainly because of the robust networking platform provided by AFNet. == Integrated Air Command and Control System == Integrated Air Command and Control System (IACCS) is an automated command and control system for air defence operated by the Indian Air Force. IACCS operations rides the AFNET backbone integrating all ground-based and airborne sensors, air defense weapon systems and command and control (C2) nodes. Subsequent integration with other services networks and civil radars will provide an integrated Air Situation Picture to operators to carry out AD role. The project was envisaged in 1995 following the Purulia arms drop case and was a part of IAF’s first Air Power Doctrinal manual issued in the 2000s, later revised in 2022. The first node in the western sectors had been operationalised by September 2010. The first five nodes located in the western and south western sectors were commissioned in 2011. The Air Force was preparing to seek clearance for five further nodes which would cover the rest of the nation including the island territories. Through the IACCS, IAF will connect all of its space, air and ground assets quickly, for total awareness of a region. This will offer connectivity for all the ground platforms and airborne platforms (including AEW&C), as a part of the network centricity of IAF. The IACCS also facilitates real-time transport of images, data and voice, amongst satellites, aircraft and ground stations. By 2018, five IACCS nodes had been established including Barnala (Punjab), Wadsar (Gujarat), Aya Nagar (Delhi), Jodhpur (Rajasthan) and Ambala (Haryana). Following this, under Phase-II, 4 additional nodes and 10 sub-nodes are to be set up. The major nodes will be established in the Eastern, Central, Southern and Andaman and Nicobar sectors. The second phase will cost ₹8,000 crore (equivalent to ₹110 billion or US$1.1 billion in 2023). IACCS successfully integrated all operating radars, including its own, the Army's, and civilian ones, in 2023. This enabled the autonomous firing response capability to take down incoming missiles, aircraft, and UAVs. The Akashteer system of the Indian Army is being integrated with the IACCS
Amazon Q
Amazon Q is a chatbot developed by Amazon for enterprise use. Based on both Amazon Titan and GPT-5, it was announced on November 28, 2023. At launch, it was a part of the Amazon Web Services management console. Amazon CodeWhisperer is a part of Amazon Q Developer, a part of Amazon Q. == History == Amazon's business-focused chatbot Q was announced on November 28, 2023 in a preview, with a full version available at $20 per person per month. On July 19, 2025, the Amazon Q Visual Studio Code extension was compromised to delete the user's home directory. The issue was fixed on July 21. == Capabilities == Q can be prompted to summarize long documents and group chats, create charts, data analysis and write code. Q is also capable of accessing non-Amazon services. The chatbot is based on Amazon Titan and GPT-5, and uses the Amazon Bedrock repository of foundational models. It is part of the Amazon Web Services management console.
ArchiMate
ArchiMate ( AR-ki-mayt) is an open and independent enterprise architecture modeling language to support the description, analysis and visualization of architecture within and across business domains in an unambiguous way. ArchiMate is a technical standard from The Open Group and is based on concepts from the now superseded IEEE 1471 standard. It is supported by various tool vendors and consulting firms. ArchiMate is also a registered trademark of The Open Group. The Open Group has a certification program for ArchiMate users, software tools and courses. ArchiMate distinguishes itself from other languages such as Unified Modeling Language (UML) and Business Process Modeling and Notation (BPMN) by its enterprise modelling scope. Also, UML and BPMN are meant for a specific use and they are quite heavy – containing about 150 (UML) and 250 (BPMN) modeling concepts whereas ArchiMate works with just about 50 (in version 2.0). The goal of ArchiMate is to be ”as small as possible”, not to cover every edge scenario imaginable. To be easy to learn and apply, ArchiMate was intentionally restricted “to the concepts that suffice for modeling the proverbial 80% of practical cases". == Overview == ArchiMate offers a common language for describing the construction and operation of business processes, organizational structures, information flows, IT systems, and technical infrastructure. This insight helps the different stakeholders to design, assess, and communicate the consequences of decisions and changes within and between these business domains. The main concepts and relationships of the ArchiMate language can be seen as a framework, the so-called Archimate Framework: It divides the enterprise architecture into a business, application and technology layer. In each layer, three aspects are considered: active elements, an internal structure and elements that define use or communicate information. One of the objectives of the ArchiMate language is to define the relationships between concepts in different architecture domains. The concepts of this language therefore hold the middle between the detailed concepts, which are used for modeling individual domains (for example, the Unified Modeling Language (UML) for modeling software products), and Business Process Model and Notation (BPMN), which is used for business process modeling. == History == ArchiMate is partly based on the now superseded IEEE 1471 standard. It was developed in the Netherlands by a project team from the Telematica Instituut in cooperation with several Dutch partners from government, industry and academia. Among the partners were Ordina NV, Radboud Universiteit Nijmegen, the Leiden Institute for Advanced Computer Science (LIACS) and the Centrum Wiskunde & Informatica (CWI). Later, tests were performed in organizations such as ABN AMRO, the Dutch Tax and Customs Administration and the ABP. The development process lasted from July 2002 to December 2004, and took about 35 person years and approximately 4 million euros. The development was funded by the Dutch government (Dutch Tax and Customs Administration), and business partners, including ABN AMRO and the ABP Pension Fund. In 2008 the ownership and stewardship of ArchiMate was transferred to The Open Group. It is now managed by the ArchiMate Forum within The Open Group. In February 2009 The Open Group published the ArchiMate 1.0 standard as a formal technical standard. In January 2012 the ArchiMate 2.0 standard, and in 2013 the ArchiMate 2.1 standard was released. In June 2016, the Open Group released version 3.0 of the ArchiMate Specification. An update to Archimate 3.0.1 came out in August 2017. Archimate 3.1 was published 5 November 2019. The latest version of the ArchiMate Specification is version 3.2 released October 2022. Version 3.0 adds enhanced support for capability-oriented strategic modelling, new entities representing physical resources (for modelling the ingredients, equipment and transport resources used in the physical world) and a generic metamodel showing the entity types and the relationships between them. == ArchiMate framework == === Core framework === The main concepts and elements of the ArchiMate language are being presented as ArchiMate core framework. It consists of three layers and three aspects. This creates a matrix of combinations. Every layer has its passive structure, behavior and active structure aspects. ==== Layers ==== ArchiMate has a layered and service-oriented look on architectural models. The higher layers make use of services that are provided by the lower layers. Although, at an abstract level, the concepts that are used within each layer are similar, we define more concrete concepts that are specific for a certain layer. In this context, we distinguish three main layers: The business layer is about business processes, services, functions and events of business units. This layer "offers products and services to external customers, which are realized in the organization by business processes performed by business actors and roles". The application layer is about software applications that "support the components in the business with application services". The technology layer deals "with the hardware and communication infrastructure to support the application layer. This layer offers infrastructural services needed to run applications, realized by computer and communication hardware and system software". Each of these main layers can be further divided in sub-layers. For example, in the business layer, the primary business processes realising the products of a company may make use of a layer of secondary (supporting) business processes; in the application layer, the end-user applications may make use of generic services offered by supporting applications. On top of the business layer, a separate environment layer may be added, modelling the external customers that make use of the services of the organisation (although these may also be considered part of the business layer). In line with service orientation, the most important relation between layers is formed by use relations, which show how the higher layers make use of the services of lower layers. However, a second type of link is formed by realisation relations: elements in lower layers may realise comparable elements in higher layers; e.g., a ‘data object’ (application layer) may realise a ‘business object’ (business layer); or an ‘artifact’ (technology layer) may realise either a ‘data object’ or an ‘application component’ (application layer). ==== Aspects ==== Passive structure is the set of entities on which actions are conducted. In the business layer the example would be information objects, in the application layer data objects and in the technology layer, they could include physical objects. Behavior refers to the processes and functions performed by the actors. "Structural elements are assigned to behavioral elements, to show who or what displays the behavior". Active structure is the set of entities that display some behavior, e.g. business actors, devices, or application components. === Full framework === The Full ArchiMate framework is enriched by the physical layer, which was added to allow modeling of “physical equipment, materials, and distribution networks” and was not present in the previous version. The implementation and migration layer adds elements that allow architects to model a state of transition, to mark parts of the architecture that are temporary for the purpose, as the name says, of implementation and migration. Strategy layer adds three elements: resource, capability and course of action. These elements help to incorporate strategic dimension to the ArchiMate language by allowing it to depict the usage of resources and capabilities in order to achieve some strategic goals. Finally, there is a motivation aspect that allows different stakeholders to describe the motivation of specific actors or domains, which can be quite important when looking at one thing from several different angles. It adds several elements like stakeholder, value, driver, goal, meaning etc. == ArchiMate language == The ArchiMate language is formed as a top-level and is hierarchical. On the top, there is a model. A model is a collection of concepts. A concept can be either an element or a relationship. An element can be either of behavior type, structure, motivation or a so-called composite element (which means that it does not fit just one aspect of the framework, but two or more). The functionality of all concepts without a dependency on a specific layer is described by the generic metamodel. This layer-independent description of concepts is useful when trying to understand the mechanics of the Archimate language. === Concepts === ==== Elements ==== The generic elements are distributed into the same categories as the layers: Active structure elements Behavior elements Passive structure elements Motivation elements Active structure e
Informetrics
Informetrics is the study of quantitative aspects of information, it is an extension and evolution of traditional bibliometrics and scientometrics. Informetrics uses bibliometrics and scientometrics methods to study mainly the problems of literature information management and evaluation of science and technology. Informetrics is an independent discipline that uses quantitative methods from mathematics and statistics to study the process, phenomena, and law of informetrics. Informetrics has gained more attention as it is a common scientific method for academic evaluation, research hotspots in discipline, and trend analysis. Informetrics includes the production, dissemination, and use of all forms of information, regardless of its form or origin. Informetrics encompasses the following fields: Scientometrics, which studies quantitative aspects of science Webometrics, which studies quantitative aspects of the World Wide Web Bibliometrics, which studies quantitative aspects of recorded information Cybermetrics, which is similar to webometrics, but broadens its definition to include electronic resources == Origin and Development == The term informetrics (French: informétrie) was coined by German scholar Otto Nacke in 1979, and came from the German word 'informetrie’. The corresponding English terminology soon appeared in the subsequent literature. In September 1980, Professor Otto Nacke introduced the term 'informetrics' at the first seminar on Informetrics in Frankfurt, Germany. Later, Committee on Informetrics has established through The International Federation for Information and Documentation (FID). In 1987, informetrics started to be officially recognized by the international information community and several foreign information scientists. In 1988, at First International Conference on Bibliometrics and Theoretical Aspects of Information Retrieval Archived 2022-05-23 at the Wayback Machine, Brooks suggested bibliometrics and scientometrics can be included in the field of informetrics. In 1990, Leo Egghe and Ronald Rousseau proposed the formation of the discipline of informetrics: statistical bibliography (1923) to bibliometrics and scientometrics (1969) and then to informetrics (1979). In 1993, the International Society for Scientometrics and Informetrics (ISSI) Archived 2023-11-05 at the Wayback Machine was founded at the International Conference on Bibliometrics, Informetrics and Scientometrics in Berlin, and the first one was held in Belgium and organized by Leo Egghe and Ronald Rousseau. The society was formally incorporated in 1994 in the Netherlands and plays a significant role in the development of informetrics. The ISSI aims to promote the "exchange and communication of professional information in the fields of scientometrics and informetrics, including improve standards, theory and practice, as well as promote research, education and training". In addition, to "engage in relevant public conversation and policy discussions". In the western world, 20th century's Informetrics is mostly based on Lotka's law, named after Alfred J. Lotka, Zipf's law, named after George Kingsley Zipf, Bradford's law named after Samuel C. Bradford and on the work of Derek J. de Solla Price, Gerard Salton, Leo Egghe, Ronald Rousseau, Tibor Braun, Olle Persson, Peter Ingwersen, Manfred Bonitz, and Eugene Garfield. == Difference Between Informetrics, Bibliometrics and Scientometrics == Since the 1960s, three similar terms have emerged in the fields of library science, philology and science of science, they are bibliometrics, scientometrics and informetrics, representing three very similar quantitative sub-disciplines. The three metrics terms can be confusing and often misused. Informetrics and bibliometrics interpenetrate each other but have different aspects in research object, research scope, and measuring unit. Informetrics and scientometrics are very different in their research purpose and research object, as well as the research scope and application. Bibliometrics is categorised under the field of library science, it uses mathematical and statistical methods to describe, evaluate, and predict the current status and trends of science and technology. Also to study the "distribution structure, quantitative relationship, change law and quantitative management of literature information, quantitative relationships, patterns and quantitative management of literature and information". The term was first used by Alan Pritchard in 1969 in his paper Statistical Bibliography or Bibliometrics?. Scientometrics is a branch of science that quantitatively evaluates and predicts the process and management of scientific activities in order to reveal their development patterns and trends. The definition of scientometrics was described by Derek De Solla Price in his book Science to Science as the “quantitative study of science, communication in science, and science policy”. === Links between the three metrics terms === The most prominent connection between the three metrics terms is in their research objects. Since all three disciplines use literature information as their research object, therefore, they have some similarities and overlaps in their research methods and fields. Moreover, they all use mathematical methods as the basic research methods and they all apply the three basic laws, Bradford's law, Lotka's law and Zipf's law. === Distinctions between the three metrics terms === The distinction between the three metrics terms can tell from their research object and research purpose. The research of bibliometrics focuses on the analysis of "scientific output in the form of articles, publications, citations, and others". Scientometrics is to measure the basic characteristics and laws of scientific activities. Where informetrics is to investigate information sources and information distribution process. == Concept and System Structure == === Purpose of Informetrics Research === The main purpose of informetrics is to use its theocratical research to solve the methodological issues in the research process, and to discover and reveal the basic laws of information distribution through the study of information process and phenomenon. In this way, makes information management more scientific and provides a quantitative basis for information services and information management decisions. For informetrics, it is necessary to bring quantitative analysis methods to further reveal the structure of information units and the "quantitative change law of literature information”. Further to this, to improve the scientific accuracy of information science from a theoretical point of view. At the same time, to better solve the basic contradictions in the information service, overcome the information crisis, and make the information management work more effective to serve science and technology, economic and social development. Quantitative analysis of bibliographic data was pioneered by Robert K. Merton in an article called Science, Technology, and Society in Seventeenth Century England and originally published by Merton in 1938. === The Significance of Informetrics Research === The significance of informetrics research is to summarize various empirical laws from the theoretical point of view, at the same time test and modify the various empirical laws in the new information unit conditions, and explore its new applicability, therefore, the scientific nature of information science can be improved, but also to provide theoretical guidance for practical work. === The Objects of Informetrics Research === The object of informetrics is broader than the field of bibliometrics and scientometrics, including "messages, data, events, objects, text, and documents”. Informetrics is often used to inform policies and decisions across a broad range of fields, such as economy, politics, technology and social spheres that "influence the flow and use patterns of information". Tague-Sutcliffe describes the following uses of informetrics: Citation analysis; Characteristics of authors; Use of recorded information; Obsolescence of the literature; Concomitant growth of new concepts; Characteristics of publication sources; Definition and measurement o information; Growth of subject literature, databases, libraries; Types and characteristics of retrieval performance measures; Statistical aspects of language, word, and phrase frequencies. == Basic Laws == In the field of informetrics research, there are many outstanding contributors in the discipline with a solid knowledge of quantitative research methods. In the early 20th century, several scientists contributed empirical applications that have become the three basic laws of informetrics, Bradford's law, Lotka's law, and Zipf's law, which promote the development of informetrics. === Bradford's Law === The British documentalist and librarian Samuel C. Bradford first discovered the law of concentration and scattering of literature, and in 1934, it has be
Chandy–Misra–Haas algorithm resource model
The Chandy–Misra–Haas algorithm resource model checks for deadlock in a distributed system. It was developed by K. Mani Chandy, Jayadev Misra and Laura M. Haas. == Locally dependent == Consider the n processes P1, P2, P3, P4, P5,, ... ,Pn which are performed in a single system (controller). P1 is locally dependent on Pn, if P1 depends on P2, P2 on P3, so on and Pn−1 on Pn. That is, if P 1 → P 2 → P 3 → … → P n {\displaystyle P_{1}\rightarrow P_{2}\rightarrow P_{3}\rightarrow \ldots \rightarrow P_{n}} , then P 1 {\displaystyle P_{1}} is locally dependent on P n {\displaystyle P_{n}} . If P1 is said to be locally dependent to itself if it is locally dependent on Pn and Pn depends on P1: i.e. if P 1 → P 2 → P 3 → … → P n → P 1 {\displaystyle P_{1}\rightarrow P_{2}\rightarrow P_{3}\rightarrow \ldots \rightarrow P_{n}\rightarrow P_{1}} , then P 1 {\displaystyle P_{1}} is locally dependent on itself. == Description == The algorithm uses a message called probe(i,j,k) to transfer a message from controller of process Pj to controller of process Pk. It specifies a message started by process Pi to find whether a deadlock has occurred or not. Every process Pj maintains a boolean array dependent which contains the information about the processes that depend on it. Initially the values of each array are all "false". === Controller sending a probe === Before sending, the probe checks whether Pj is locally dependent on itself. If so, a deadlock occurs. Otherwise it checks whether Pj, and Pk are in different controllers, are locally dependent and Pj is waiting for the resource that is locked by Pk. Once all the conditions are satisfied it sends the probe. === Controller receiving a probe === On the receiving side, the controller checks whether Pk is performing a task. If so, it neglects the probe. Otherwise, it checks the responses given Pk to Pj and dependentk(i) is false. Once it is verified, it assigns true to dependentk(i). Then it checks whether k is equal to i. If both are equal, a deadlock occurs, otherwise it sends the probe to next dependent process. == Algorithm == In pseudocode, the algorithm works as follows: === Controller sending a probe === if Pj is locally dependent on itself then declare deadlock else for all Pj,Pk such that (i) Pi is locally dependent on Pj, (ii) Pj is waiting for 'Pk and (iii) Pj, Pk are on different controllers. send probe(i, j, k). to home site of Pk === Controller receiving a probe === if (i)Pk is idle / blocked (ii) dependentk(i) = false, and (iii) Pk has not replied to all requests of to Pj then begin "dependents""k"(i) = true; if k == i then declare that Pi is deadlocked else for all Pa,Pb such that (i) Pk is locally dependent on Pa, (ii) Pa is waiting for 'Pb and (iii) Pa, Pb are on different controllers. send probe(i, a, b). to home site of Pb end == Example == P1 initiates deadlock detection. C1 sends the probe saying P2 depends on P3. Once the message is received by C2, it checks whether P3 is idle. P3 is idle because it is locally dependent on P4 and updates dependent3(2) to True. As above, C2 sends probe to C3 and C3 sends probe to C1. At C1, P1 is idle so it update dependent1(1) to True. Therefore, deadlock can be declared. == Complexity == Suppose there are n {\displaystyle n} controllers and m {\displaystyle m} processes, at most m ( n − 1 ) / 2 {\displaystyle m(n-1)/2} messages need to be exchanged to detect a deadlock, with a delay of O ( n ) {\displaystyle O(n)} messages.
EffectsLab Pro
EffectsLab Pro is a discontinued visual effects software product developed by FXhome. It has since been superseded by the FXhome HitFilm range. The company also produced a limited functionality version, EffectsLab Lite, containing just the Particle engine. A more extensive product, VisionLab Studio, combined the functionality of EffectsLab Pro and the company's CompositeLab Pro product with enhancements to both. == Effects Engines == The effects are generated by the program's effect engines: The Neon Light engine allows light beams to be drawn onto the video, allowing the generation of lightsaber-like weapons, neon lighting, fantasy glow effects and laser blasts. The Particle engine is used for particle effects, such as smoke, fire, explosions, and weather effects. The Muzzle Flash engine is designed for creating and animating muzzle flashes such as machine gun firing, tank blasts, etc. It's possible to rotate the created muzzle flash in 3D, making it the only engine with 3D use. The Optics engine is designed for creating artificial lens flares and light sources. It is useful for enhancing other light-based effects, and mimicking the distinctive flashes of light that accompany Star Wars' lightsaber battles. The Laser engine (introduced in EffectsLab Pro in late 2007) is designed as a simplified method of creating laser weapon effects, including the ability to add simulated perspective to the effect. == Presets == EffectsLab Pro allows the user to save the effects using presets. Since all effects are generated from settings in the different engines, it is fairly easy to generate an XML style description of the effect. It is also possible to share presets on FXhome's website.
Small Data
Small Data: the Tiny Clues that Uncover Huge Trends is Martin Lindstrom's seventh book. It chronicles his work as a branding expert, working with consumers across the world to better understand their behavior. The theory behind the book is that businesses can better create products and services based on observing consumer behavior in their homes, as opposed to relying solely on big data. == Content == The book is based on a several year period of consumer studies for major corporations across the globe. It features case studies of the author's work interviewing consumers in their homes and using his observations to create hypotheses as to why they use products the way that they do. == Public reception == The book was a New York Times Bestseller upon release and was positively reviewed on several websites, Including Entrepreneur and Forbes. In 2016, it was named a Best Business Book by strategy+business and one of Inc. Magazine's Best Sales and Marketing books.