AI safety is an interdisciplinary field focused on preventing accidents, misuse, or other harmful consequences arising from artificial intelligence systems. It encompasses AI alignment (which aims to ensure AI systems behave as intended), monitoring AI systems for risks, and enhancing their robustness. The field is particularly concerned with existential risks posed by advanced AI models. Beyond technical research, AI safety involves developing norms and policies that promote safety, including advocacy for regulations at different levels of government. The field gained significant popularity in 2023, with rapid progress in generative AI and public concerns voiced by researchers and CEOs about potential dangers. During the 2023 AI Safety Summit, the United States and the United Kingdom both established their own AI Safety Institute. However, researchers have expressed concern that AI safety measures are not keeping pace with the rapid development of AI capabilities. == Motivations == Scholars discuss current risks from critical systems failures, bias, and AI-enabled surveillance, as well as emerging risks like technological unemployment, digital manipulation, weaponization, AI-enabled cyberattacks and bioterrorism. They also discuss speculative risks from losing control of future artificial general intelligence (AGI) agents, or from AI enabling perpetually stable dictatorships. === Existential safety === Some have criticized concerns about AGI, such as Andrew Ng who compared them in 2015 to "worrying about overpopulation on Mars when we have not even set foot on the planet yet". Stuart J. Russell on the other side urges caution, arguing that "it is better to anticipate human ingenuity than to underestimate it". AI researchers have widely differing opinions about the severity and primary sources of risk posed by AI technology – though surveys suggest that experts take high consequence risks seriously. In two surveys of AI researchers, the median respondent was optimistic about AI overall, but placed a 5% probability on an "extremely bad (e.g. human extinction)" outcome of advanced AI. In a 2022 survey of the natural language processing community, 37% agreed or weakly agreed that it is plausible that AI decisions could lead to a catastrophe that is "at least as bad as an all-out nuclear war". == History == Risks from AI began to be seriously discussed at the start of the computer age: Moreover, if we move in the direction of making machines which learn and whose behavior is modified by experience, we must face the fact that every degree of independence we give the machine is a degree of possible defiance of our wishes. In 1988 Blay Whitby published a book outlining the need for AI to be developed along ethical and socially responsible lines. From 2008 to 2009, the Association for the Advancement of Artificial Intelligence (AAAI) commissioned a study to explore and address potential long-term societal influences of AI research and development. The panel was generally skeptical of the radical views expressed by science-fiction authors but agreed that "additional research would be valuable on methods for understanding and verifying the range of behaviors of complex computational systems to minimize unexpected outcomes". In 2011, Roman Yampolskiy introduced the term "AI safety engineering" at the Philosophy and Theory of Artificial Intelligence conference, listing prior failures of AI systems and arguing that "the frequency and seriousness of such events will steadily increase as AIs become more capable". In 2014, philosopher Nick Bostrom published the book Superintelligence: Paths, Dangers, Strategies. He has the opinion that the rise of AGI has the potential to create various societal issues, ranging from the displacement of the workforce by AI, manipulation of political and military structures, to even the possibility of human extinction. His argument that future advanced systems may pose a threat to human existence prompted Elon Musk, Bill Gates, and Stephen Hawking to voice similar concerns. In 2015, dozens of artificial intelligence experts signed an open letter on artificial intelligence calling for research on the societal impacts of AI and outlining concrete directions. To date, the letter has been signed by over 8000 people including Yann LeCun, Shane Legg, Yoshua Bengio, and Stuart Russell. In the same year, a group of academics led by professor Stuart J. Russell founded the Center for Human-Compatible AI at the University of California Berkeley and the Future of Life Institute awarded $6.5 million in grants for research aimed at "ensuring artificial intelligence (AI) remains safe, ethical and beneficial". In 2016, the White House Office of Science and Technology Policy and Carnegie Mellon University announced The Public Workshop on Safety and Control for Artificial Intelligence, which was one of a sequence of four White House workshops aimed at investigating "the advantages and drawbacks" of AI. In the same year, Concrete Problems in AI Safety – one of the first and most influential technical AI Safety agendas – was published. In 2017, the Future of Life Institute sponsored the Asilomar Conference on Beneficial AI, where more than 100 thought leaders formulated principles for beneficial AI including "Race Avoidance: Teams developing AI systems should actively cooperate to avoid corner-cutting on safety standards". In 2018, the DeepMind Safety team outlined AI safety problems in specification, robustness, and assurance. The following year, researchers organized a workshop at ICLR that focused on these problem areas. In 2021, Unsolved Problems in ML Safety was published, outlining research directions in robustness, monitoring, alignment, and systemic safety. In 2023, Rishi Sunak said he wants the United Kingdom to be the "geographical home of global AI safety regulation" and to host the first global summit on AI safety. The AI safety summit took place in November 2023, and focused on the risks of misuse and loss of control associated with frontier AI models. During the summit the intention to create the International Scientific Report on the Safety of Advanced AI was announced. In 2024, The US and UK forged a new partnership on the science of AI safety. The MoU was signed on 1 April 2024 by US commerce secretary Gina Raimondo and UK technology secretary Michelle Donelan to jointly develop advanced AI model testing, following commitments announced at an AI Safety Summit in Bletchley Park in November. In 2025, an international team of 96 experts chaired by Yoshua Bengio published the first International AI Safety Report. The report, commissioned by 30 nations and the United Nations, represents the first global scientific review of potential risks associated with advanced artificial intelligence. It details potential threats stemming from misuse, malfunction, and societal disruption, with the objective of informing policy through evidence-based findings, without providing specific recommendations. == Research focus == AI safety research areas include robustness, monitoring, and alignment. === Robustness === ==== Adversarial robustness ==== AI systems are often vulnerable to adversarial examples or "inputs to machine learning (ML) models that an attacker has intentionally designed to cause the model to make a mistake". For example, in 2013, Szegedy et al. discovered that adding specific imperceptible perturbations to an image could cause it to be misclassified with high confidence. This continues to be an issue with neural networks, though in recent work the perturbations are generally large enough to be perceptible. The image on the right is predicted to be an ostrich after the perturbation is applied. (Left) is a correctly predicted sample, (center) perturbation applied magnified by 10x, (right) adversarial example. Adversarial robustness is often associated with security. Researchers demonstrated that an audio signal could be imperceptibly modified so that speech-to-text systems transcribe it to any message the attacker chooses. Network intrusion and malware detection systems also must be adversarially robust since attackers may design their attacks to fool detectors. Models that represent objectives (reward models) must also be adversarially robust. For example, a reward model might estimate how helpful a text response is and a language model might be trained to maximize this score. Researchers have shown that if a language model is trained for long enough, it will leverage the vulnerabilities of the reward model to achieve a better score and perform worse on the intended task. This issue can be addressed by improving the adversarial robustness of the reward model. More generally, any AI system used to evaluate another AI system must be adversarially robust. This could include monitoring tools, since they could also potentially be tampered with to produce a higher reward. Large language models (LLMs) can be vulnerable to prom
Averbis
Averbis has a focus on healthcare, pharma, automotive and intellectual property analytics. Averbis is involved in various research projects of the German Federal Ministry of Economics and Energy and the European Union such as DebugIT, EUCases, Mantra and SEMCARE. In addition to these projects, Averbis was also involved in the following projects: Greenpilot is a virtual library, which provides technical information in the fields of nutrition, environment and agriculture. Medpilot is a virtual library, which provides information about medicine and related sciences. In 2013, Averbis has been nominated for the German Founder Prize 2013. Averbis GmbH provides text analytics and text mining software to transform unstructured text into actionable information. It was founded in 2007 by IT experts after years of relevant scientific experience in the field of text mining and multilingual information retrieval. Averbis works in the field of terminology management, natural language processing, machine learning and semantic search. Its text mining software is embedded into the text mining framework UIMA.
Linux color management
Linux color management has the same goal as the color management systems (CMS) for other operating systems, which is to achieve the best possible color reproduction throughout an imaging workflow from its source (camera, video, scanner, etc.), through imaging software (Digikam, darktable, RawTherapee, GIMP, Krita, Scribus, etc.), and finally onto an output medium (monitor, video projector, printer, etc.). In particular, color management attempts to enable color consistency across media and throughout a color-managed workflow. Linux color management relies on the use of accurate ICC (International Color Consortium) and DCP (DNG Color Profile) profiles describing the behavior of input and output devices, and color-managed applications that are aware of these profiles. These applications perform gamut conversions between device profiles and color spaces. Gamut conversions, based on accurate device profiles, are the essence of color management. Historically, color management was not an initial design consideration of the X Window System on which much of Linux graphics support rests, and thus color-managed workflows have been somewhat more challenging to implement on Linux than on other OS's such as Microsoft Windows or macOS. This situation is now being progressively remedied, and color management under Linux, while functional, has not yet acquired mature status. Although it is now possible to obtain a consistent color-managed workflow under Linux, certain problems still remain: The absence of a central user control panel for color settings. Some hardware devices for color calibration lack Linux drivers, firmware or accessory data. Since ICC color profiles are written to an open specification, they are compatible across operating systems. Hence, a profile produced on one OS should work on any other OS given the availability of the necessary software to read it and perform the gamut conversions. This can be used as a workaround for the lack of support for certain spectrophotometers or colorimeters under Linux: one can simply produce a profile on a different OS and then use it in a Linux workflow. Additionally, certain hardware, such as most printers and certain monitors, can be calibrated under another OS and then used in a fully color-managed workflow on Linux. The popular Ubuntu Linux distribution added initial color management in the 11.10 release (the "Oneiric Ocelot" release). == Requirements for a color-managed workflow == Accurate device profiles obtained with source or output characterization software. Correctly loaded video card lookup tables (LUTs) (or monitor profiles that do not require LUT adjustments). Color-managed applications that are configured to use a correct monitor profile and input/output profiles, with support for control over the rendering intent and black point compensation. Calibration and profiling requires: for input devices (scanner, camera, etc.) a color target which the profiling software will compare to the manufacturer-provided color values of the target. or for output devices (monitor, printer, etc.) a reading with a specific device (spectrophotometer, colorimeter or spectrocolorimeter) of the color patch values and comparing the measured values against the values originally sent for output. === Monitor calibration and profiling === One of the critical elements in any color-managed workflow is the monitor, because, at one step or another, handling and making color adaptation through imaging software is required for most images, thus the ability of the monitor to present accurate colors is crucial. Monitor color management consists of calibration and profiling. The first step, calibration, is done by adjusting the monitor controls and the output of the graphics card (via calibration curves) to match user-definable characteristics, such as brightness, white point and gamma. The calibration settings are stored in a .cal file. The second step, profiling (characterization), involves measuring the calibrated display's response and recording it in a color profile. The profile is stored in an .icc file ("ICC file"). For convenience, the calibration settings are usually stored together with the profile in the ICC file. Note that .icm files are identical to .icc files - the difference is only in the name. Seeing correct colors requires using a monitor profile-aware application, together with the same calibration used when profiling the monitor. Calibration alone does not yield accurate colors. If a monitor was calibrated before it was profiled, the profile will only yield correct colors when used on the monitor with the same calibration (the same monitor control adjustments and the same calibration curves loaded into the video card's lookup table). macOS has built-in support for loading calibration curves and installing a system-wide color profile. Windows 7 onward allows loading calibration curves, though this functionality must be enabled manually. Linux and older versions of Windows require using a standalone LUT loader. === Device profiles === ICC profiles are cross-platform and can thus be created on other operating systems and used under Linux. Monitor profiles, however, require some additional attention. Since a monitor profile depends both on the monitor itself and on the video card, a monitor profile should only be used with the same monitor and video card with which it was created. The monitor settings should not be adjusted after creating the profile. In addition, since most calibration software use LUT adjustments during calibration, the corresponding LUTs must be loaded every time the display server (X11, Wayland) is started (e.g. with every graphical login). In the unlikely case of a colorimeter being unsupported by Linux, a profile created under Windows or macOS can be used under Linux. === Display-channel lookup tables === There are two approaches to loading display channel LUTs: Create a profile that does not modify video card LUTs and thus does not require LUTs be loaded later on. Ideally, this approach would rely on DDC-capable monitors—the internal monitor settings of which are set via calibration software. Unfortunately, monitors capable of making these adjustments through DDC are not common and are generally expensive. There is only one calibration software on Linux that can interact with a DDC monitor. For mainstream monitors, a couple of options exist: BasICColor software, which works with most colorimeters on the market, allows one to adjust display output via the monitor interface, and then to choose a "Profile, do not calibrate" option. By doing this, one can create a profile that does not require video card LUT adjustments. For EyeOne devices, EyeOne Match allows the user to calibrate to "Native" gamma and white point targets, which results in the LUT adjustment curves displayed after the calibration as a simple, linear 1:1 mapping (a straight line from corner to corner). Both BasICColor and EyeOne Match do not presently run under Linux but they are capable of creating a profile that does not require LUT adjustments. Use an LUT loader to actually load the LUT adjustments contained within the profile prepared during calibration. According to the documentation, these loaders do not modify the video card LUT by itself, but achieve the same type of adjustment by modifying the X server gamma ramp. Loaders are available for Linux distributions that use X.org or XFree86—the two most popular X servers on Linux. Other X servers are not guaranteed to work with the currently available loaders. There are two LUT loaders available for Linux: Xcalib is one such loader, and although it is a command-line utility, it is quite easy to use. dispwin is a part of Argyll CMS. If, for any reason, the LUT cannot be loaded, it is still recommended to go through the initial stages of calibration where a user is asked by calibration software to make some manual adjustments to the monitor, as this will often improve display linearity and also provide information on its color temperature. This is especially recommended for CRT monitors. === Color-managed applications === In ICC-aware applications, it is important to make sure the correct profiles are assigned to devices, mainly to the monitor and the printer. Some Linux applications can auto-detect the monitor profile, while others requires that it is specified manually. Although there is no designated place to store device profiles on Linux, /usr/share/color/icc/ has become the de facto standard. Most applications running under WINE have not been fully tested for color accuracy. While 8-bpp programs can have some color resolution difficulties due to depth conversion errors, colors in higher-depth applications should be accurate, as long as those programs perform their gamut conversions based on the same monitor profile as that used for loading the LUT, granted that the corresponding LUT adjustments are loaded. == List of color-managed applications == darktabl
Database virtualization
Database virtualization is the decoupling of the database layer, which lies between the storage and application layers within the application stack. Virtualization of the database layer enables a shift away from the physical, toward the logical or virtual. Virtualization enables compute and storage resources to be pooled and allocated on demand. This enables both the sharing of single server resources for multi-tenancy, as well as the pooling of server resources into a single logical database or cluster. In both cases, database virtualization provides increased flexibility, more granular and efficient allocation of pooled resources, and more scalable computing. == Virtual data partitioning == The act of partitioning data stores as a database grows has been in use for several decades. There are two primary ways that data has been partitioned inside legacy data management systems: Shared-data databases: an architecture that assumes all database cluster nodes share a single partition. Inter-node communications are used to synchronize update activities performed by different nodes on the cluster. Shared-data data management systems are limited to single-digit node clusters. Shared-nothing databases: an architecture in which all data is segregated to internally managed partitions with clear, well-defined data location boundaries. Shared-nothing databases require manual partition management. In virtual partitioning, logical data is abstracted from physical data by autonomously creating and managing large numbers of data partitions (100s to 1000s). Because they are autonomously maintained, the resources required to manage the partitions are minimal. This kind of massive partitioning results in: Partitions that are small, efficiently managed, and load-balanced. Systems that do not require re-partitioning events to define additional partitions, even when the hardware is changed. “Shared-data” and “shared-nothing” architectures allow scalability through multiple data partitions and cross-partition querying and transaction processing without full partition scanning. == Horizontal data partitioning == Partitioning database sources from consumers is a fundamental concept. With greater numbers of database sources, inserting a horizontal data virtualization layer between the sources and consumers helps address this complexity. Rick van der Lans, the author of multiple books on SQL and relational databases, has defined data virtualization as "the process of offering data consumers a data access interface that hides the technical aspects of stored data, such as location, storage structure, API, access language, and storage technology." == Advantages == Added flexibility and agility for existing computing infrastructure. Enhanced database performance. Pooling and sharing computing resources, either splitting them (multi-tenancy) or combining them (clustering). Simplification of administration and management. Increased fault tolerance.
Trebel (music app)
Trebel is an on-demand music download and discovery platform developed by M&M Media Inc. The company's business model aims to combat digital music piracy by giving users access to on-demand music at no cost while delivering fair compensation to artists and music rights holders. Trebel has a patent that allows it to market itself as the only international music service in which users can legally download music and listen to it offline for free. As of March 2023, Trebel has a catalog of 75 million songs from record labels such as Universal Music Group, Sony Music Entertainment, Warner Music Group and hundreds of independent labels. Trebel is based in Stamford, Connecticut. with additional locations in Mexico City, Jakarta, Bogota, Los Angeles and Miami. The app is available in the Apple App Store, Google Play Store, and Huawei AppGallery. == History == Trebel was founded in 2014 by Gary Mekikian, who was previously the co-founder of answerFriend, Inc., which commercialized web based question-answering technologies and merged with Electric Knowledge, forming InQuira. This company was eventually acquired by Oracle Corporation in 2011. His co-founders at Trebel include Stanford classmates Corey Jones and Luis Soto Durazo, as well as his daughters Grace and Juliette. Mekikian envisioned Trebel as an alternative to music piracy after a high school classmate of his daughters was targeted by cyberattackers while illegally downloading music online. Trebel was initially released in 2015 under the name Project Carmen to students at Ohio State, Santa Monica College, Cal State Fullerton, UCLA and Long Beach State. In its original incarnation, the service planned to target students at 3,000 universities and 30,000 high schools in the United States. A beta version of the app was introduced in 2016 with content from Universal Music Group and Warner Music Group. Trebel launched commercially in the United States and Mexico in 2018. In 2018, Mexican mass-media corporation Televisa also became a minority investor in Trebel. In May 2020, during the early months of the COVID-19 pandemic, Trebel was a digital broadcast partner for Se Agradece, a concert produced in Mexico by Televisa to honor frontline COVID workers that featured artists such as Rosalia, J Balvin, Maluma and Ricky Martin. In June 2021, Trebel reached 3 million monthly active users. In October 2021, Trebel signed a music licensing agreement with Merlin Network, the licensing agency for the independent music sector that controls an estimated 12% of the global digital recorded music market. In January 2022, Trebel announced a strategic alliance with MNC Corporation, an Indonesian media conglomerate, which also became a minority backer of the company. In March 2022, Trebel reported 5.2 million monthly active users as a result of growth in Latin America. In the same month,, Latin music star Maluma became a backer of Trebel and an advisor to Gary Mekikian, helping expand the service throughout Latin America. On April 18, 2022, Trebel launched in Indonesia during the finale of the music competition show X Factor Indonesia. Trebel also signed a deal that month with Soccer Media Solutions, a sports and entertainment marketing agency in Mexico, to sell Trebel’s premium advertising inventory through Soccer Media. In May 2022, Guillermo Ochoa, goalkeeper for the Mexican national soccer team, invested in Trebel and became an ambassador for the company. On October 2, 2022, Trebel collaborated with Musica Studios, one of the largest music companies in Indonesia, on the production of a music festival in Jakarta titled Trebel Music Fest. The event featured performances by top Indonesian music artists such as Noah, Nidji, and d'Masiv. In October 2022, Trebel launched in Colombia. The service reached 1.2 million monthly active users in Colombia six months after launching. In December 2022, Trebel collaborated with KFC in Indonesia on the release of a KFC digital music program using a product called Trebel Max. As part of the program, KFC customers who bought the Crazy Superstar Combo package at KFC received a subscription to Trebel Max for 30 days. Trebel announced the launch of Trebel AI in May 2023. Trebel AI uses ChatGPT-powered technology to generate playlists based on natural language queries from users. In Indonesia, the Trebel AI feature was announced during a broadcast of the show Indonesian Idol XII that took place on May 8, 2023. In July 2023, Trebel reached more than 13 million monthly active users. In November 2023, Trebel became a featured app on the Discord app directory. Discord users that add the Trebel bot to their servers have access to Trebel's on-demand music library and have the exclusive privilege of being DJ's during server sessions with up to 150 concurrent listeners. == Platform == === Features === Trebel has a patent that allows it to market itself as the only international music service in which users can legally download music and listen to it offline for free. As of March 2023, Trebel has a catalog of 75 million songs from record labels such as Universal Music Group, Sony Music Entertainment, Warner Music Group and hundreds of independent labels. Trebel offers unlimited music downloads that are playable in the app by registered users only. Offline listening is free to all users and not blocked by a paywall. Users can search for music based on song, artist, album, browsing friends' recent activity, and through other users' playlists. The app also offers free cloud storage for downloaded songs. Trebel also contains a feature called SongID, which identifies music being played nearby using a short sample, then offers it for download on the service. Podcasts are available for free listening on the service as well. === Business model === Trebel uses a business model that generates revenue from the sale of digital advertising as well as user interactions with branded experiences, and consumption of virtual goods within the app (akin to mobile games). The app also features a brand takeover feature called Trebel Max, which offers unlimited access in exchange for users engaging with experiences offered by specific brands. Trebel’s brand partners include Uber, KFC, Walmart, Coca-Cola, Amazon and P&G. === Content === In September 2022, Trebel secured an exclusive release of the song “Suara Hatiku” by Indonesian actress Amanda Monopo. As of March 2023, Trebel offers 75 million songs through licensing agreements with Universal Music Group, Sony Music Entertainment, Warner Music Group and global indie rights agency Merlin. == Awards == In 2023, Trebel won three Google Play awards including "Best App of 2023", "Best Everyday Essentials" and "Users' Choice".
CodeSandbox
CodeSandbox is a cloud-based online integrated development environment (IDE) focused on web application development. It supports popular web technologies such as JavaScript, TypeScript, React, Vue.js, and Node.js. CodeSandbox allows users to create, edit, and deploy web applications directly from the browser with zero setup. CodeSandbox is widely used for front-end development, rapid prototyping, sharing code snippets, and real-time collaborative coding. It provides GitHub integration, templates for common frameworks, and a cloud-based development container for full-stack projects. == Templates == == Limitations == Slower performance for larger tasks compared to native IDEs Some features require a paid subscription Performance and storage limits for free-tier users Limited offline capabilities
Metadatabase
Metadatabase is a database model for (1) metadata management, (2) global query of independent databases, and (3) distributed data processing. The word metadatabase is an addition to the dictionary. Originally, metadata was only a common term referring simply to "data about data", such as tags, keywords, and markup headers. However, in this technology, the concept of metadata is extended to also include such data and knowledge representation as information models (e.g., relations, entities-relationships, and objects), application logic (e.g., production rules), and analytic models (e.g., simulation, optimization, and mathematical algorithms). In the case of analytic models, it is also referred to as a Modelbase. These classes of metadata are integrated with some modeling ontology to give rise to a stable set of meta-relations (tables of metadata). Individual models are interpreted as metadata and entered into these tables. As such, models are inserted, retrieved, updated, and deleted in the same manner as ordinary data do in an ordinary (relational) database. Users will also formulate global queries and requests for processing of local databases through the Metadatabase, using the globally integrated metadata. The Metadatabase structure can be implemented in any open technology for relational databases. == Significance == The Metadatabase technology is developed at Rensselaer Polytechnic Institute at Troy, New York, by a group of faculty and students (see the references at the end of the article), starting in late 1980s. Its main contribution includes the extension of the concept of metadata and metadata management, and the original approach of designing a database for metadata applications. These conceptual results continue to motivate new research and new applications. At the level of particular design, its openness and scalability is tied to that of the particular ontology proposed: It requires reverse-representation of the application models in order to save them into the meta-relations. In theory, the ontology is neutral, and it has been proven in some industrial applications. However, it needs more development to establish it for the field as an open technology. The requirement of reverse-representation is common to any global information integration technology. A way to facilitate it in the Metadatabase approach is to distribute a core portion of it at each local site, to allow for peer-to-peer translation on the fly.