U-Net is a convolutional neural network that was developed for image segmentation. The network is based on a fully convolutional neural network whose architecture was modified and extended to work with fewer training images and to yield more precise segmentation. Segmentation of a 512 × 512 image takes less than a second on a modern (2015) GPU using the U-Net architecture. The U-Net architecture has also been employed in diffusion models for iterative image denoising. This technology underlies many modern image generation models, such as DALL-E, Midjourney, and Stable Diffusion. U-Net is also being explored for language models. Tokenization is not a separate step, allowing the model to more easily understand spelling and concurrently vectorizing / tokenizing higher level concepts. == Description == The U-Net architecture stems from the so-called "fully convolutional network". The main idea is to supplement a usual contracting network by successive layers, where pooling operations are replaced by upsampling operators. Hence these layers increase the resolution of the output. A successive convolutional layer can then learn to assemble a precise output based on this information. One important modification in U-Net is that there are a large number of feature channels in the upsampling part, which allow the network to propagate context information to higher resolution layers. As a consequence, the expansive path is more or less symmetric to the contracting part, and yields a u-shaped architecture. The network only uses the valid part of each convolution without any fully connected layers. To predict the pixels in the border region of the image, the missing context is extrapolated by mirroring the input image. This tiling strategy is important to apply the network to large images, since otherwise the resolution would be limited by the GPU memory. Recently, there had also been an interest in receptive field based U-Net models for medical image segmentation. == Network architecture == The network consists of a contracting path and an expansive path, which gives it the u-shaped architecture. The contracting path is a typical convolutional network that consists of repeated application of convolutions, each followed by a rectified linear unit (ReLU) and a max pooling operation. During the contraction, the spatial information is reduced while feature information is increased. The expansive pathway combines the feature and spatial information through a sequence of up-convolutions and concatenations with high-resolution features from the contracting path. == Applications == There are many applications of U-Net in biomedical image segmentation, such as brain image segmentation (''BRATS'') and liver image segmentation ("siliver07") as well as protein binding site prediction. U-Net implementations have also found use in the physical sciences, for example in the analysis of micrographs of materials. Variations of the U-Net have also been applied for medical image reconstruction. Here are some variants and applications of U-Net as follows: Pixel-wise regression using U-Net and its application on pansharpening; 3D U-Net: Learning Dense Volumetric Segmentation from Sparse Annotation; TernausNet: U-Net with VGG11 Encoder Pre-Trained on ImageNet for Image Segmentation. Image-to-image translation to estimate fluorescent stains In binding site prediction of protein structure. == History == U-Net was created by Olaf Ronneberger, Philipp Fischer, Thomas Brox in 2015 and reported in the paper "U-Net: Convolutional Networks for Biomedical Image Segmentation". It is an improvement and development of FCN: Evan Shelhamer, Jonathan Long, Trevor Darrell (2014). "Fully convolutional networks for semantic segmentation".
Capture the flag (cybersecurity)
In computer security, Capture the Flag (CTF) is an exercise in which participants attempt to find text strings, called "flags", which are secretly hidden in purposefully vulnerable programs or websites. They can be used for both competitive or educational purposes. In two main variations of CTFs, participants either steal flags from other participants (attack/defense-style CTFs) or from organizers (jeopardy-style challenges). A mixed competition combines these two styles. Competitions can include hiding flags in hardware devices, they can be both online or in-person, and can be advanced or entry-level. The game is inspired by the traditional outdoor sport with the same name. CTFs are used as a tool for developing and refining cybersecurity skills, making them popular in both professional and academic settings. == Overview == Capture the Flag (CTF) is a cybersecurity competition that is used to test and develop computer security skills. It was first developed in 1996 at DEF CON, the largest cybersecurity conference in the United States which is hosted annually in Las Vegas, Nevada. The conference hosts a weekend of cybersecurity competitions, including their flagship CTF. Two popular CTF formats are jeopardy and attack-defense. Both formats test participant’s knowledge in cybersecurity, but differ in objective. In the Jeopardy format, participating teams must complete as many challenges of varying point values from a various categories such as cryptography, web exploitation, and reverse engineering. In the attack-defense format, competing teams must defend their vulnerable computer systems while attacking their opponent's systems. The exercise involves a diverse array of tasks, including exploitation and cracking passwords, but there is little evidence showing how these tasks translate into cybersecurity knowledge held by security experts. Recent research has shown that the Capture the Flag tasks mainly covered technical knowledge but lacked social topics like social engineering and awareness on cybersecurity. == Educational applications == CTFs have been shown to be an effective way to improve cybersecurity education through gamification. There are many examples of CTFs designed to teach cybersecurity skills to a wide variety of audiences, including PicoCTF, organized by the Carnegie Mellon CyLab, which is oriented towards high school students, and Arizona State University supported pwn.college. Beyond educational CTF events and resources, CTFs has been shown to be a highly effective way to instill cybersecurity concepts in the classroom. CTFs have been included in undergraduate computer science classes such as Introduction to Information Security at the National University of Singapore. CTFs are also popular in military academies. They are often included as part of the curriculum for cybersecurity courses, with the NSA organized Cyber Exercise culminating in a CTF competition between the US service academies and military colleges. == Competitions == Many CTF organizers register their competition with the CTFtime platform. This allows the tracking of the position of teams over time and across competitions. These include "Plaid Parliament of Pwning", "More Smoked Leet Chicken", "Dragon Sector", "dcua", "Eat, Sleep, Pwn, Repeat", "perfect blue", "organizers" and "Blue Water". Overall the "Plaid Parliament of Pwning" and "Dragon Sector" have both placed first worldwide the most with three times each. === Community competitions === Every year there are dozens of CTFs organized in a variety of formats. Many CTFs are associated with cybersecurity conferences such as DEF CON, various editions of SANS Institute's NetWars, HITCON, and BSides. The DEF CON CTF, an attack-defence CTF, is notable for being one of the oldest CTF competitions to exist, and has been variously referred to as the "World Series", "Superbowl", and "Olympics", of hacking by media outlets. The NYU Tandon hosted Cybersecurity Awareness Worldwide (CSAW) CTF is one of the largest open-entry competitions for students learning cybersecurity from around the world. In 2021, it hosted over 1200 teams during the qualification round. In addition to conference organized CTFs, many CTF clubs and teams organize CTF competitions. Many CTF clubs and teams are associated with universities, such as the CMU associated Plaid Parliament of Pwning, which hosts PlaidCTF, and the ASU associated Shellphish. Some community CTFs are online and open to all participants. The SANS Institute Holiday Hack Challenge and TryHackMe Advent of Cyber. === Government-supported competitions === Governmentally supported CTF competitions include the DARPA Cyber Grand Challenge and ENISA European Cybersecurity Challenge. In 2023, the US Space Force-sponsored Hack-a-Sat CTF competition included, for the first time, a live orbital satellite for participants to exploit. === Corporate-supported competitions === Corporations and other organizations sometimes use CTFs as a training or evaluation exercise, with benefits similar to those in educational settings. In addition to internal CTF exercises, some corporations such as Google and Tencent host publicly accessible CTF competitions. == In popular culture == In Mr. Robot, a qualification round for the DEF CON CTF competition is depicted in the season 3 opener "eps3.0_power-saver-mode.h". The logo for DEF CON can be seen in the background. In The Undeclared War, a CTF is depicted in the opening scene of the series as a recruitment exercise used by GCHQ. Go Go Squid!, a Chinese television series, is based around training for and competing in highly stylized CTF competitions .
Brave Leo
Brave Leo is a large language model-based chatbot developed by Brave Software and included with the Brave browser. == History == In November 2023, the company said versions for iOS and Android would be available "in the coming months". == Features == Since January 2024, Leo has used the open-source Mixtral 8x7B from Mistral AI as its default large language model, in addition to LLaMA 2 from Meta Platforms and Claude from Anthropic, both of which have been used previously. Leo can suggest follow-up questions, and summarize webpages, PDFs, and videos. Leo has a $15 (US) per month premium version that enables more requests and uses larger LLMs. == Privacy == The answers given by Leo are not saved. Brave uses the slogan Love Privacy to emphasize its focus on user privacy and data protection. The phrase has been featured in Brave's official marketing campaigns and has been cited in media coverage of the browser's privacy-first approach. == Controversies == In 2023, PC World reported that Leo evades questions about US elections.
Agent Ruby
Agent Ruby (1998–2002) by Lynn Hershman Leeson is an interactive, multiuser work using artificial intelligence. == Description == On Agent Ruby's website, "Agent Ruby's Edream Portal," a female face moves her eyes and lips. Ruby, named from Hershman Leeson's own film, Teknolust, answers questions and often responds that she needs a better algorithm to answer questions not within her database. The work, created with AI, explores relationships between real and virtual worlds. Hershman Leeson had created an earlier version of Ruby, CyberRoberta, which was a custom-made doll with webcam eyes that interacted with the internet. The work in a gallery provides a screen and a sign inviting gallery-goers to "Chat with Ruby." == Artificial intelligence == In 2015 when Agent Ruby was exhibited at the gallery Modern Art Oxford, a review in Aesthetica Magazine described it as an artificial intelligence agent. A review in New Scientist noted that "Ruby is a fast learner, but perhaps not a natural conversationalist." A 2024 list of "25 Essential AI Artworks" published by ARTnews wrote that while "Agent Ruby's capabilities seem limited by today's standards," it was extensive for its day. == Publications and exhibitions == Agent Ruby was commissioned and displayed at the San Francisco Museum of Modern Art, Modern Art Oxford, and the ZKM Center for Art and Media in Karlsruhe, Germany. The San Francisco Museum of Modern Art (SFMOMA) presented Lynn Hershman Leeson: The Agent Ruby Files, March 30 through June 2, 2013 which presented the project server's archive of user conversations over the 12 years of exhibitions.
Cache language model
A cache language model is a type of statistical language model. These occur in the natural language processing subfield of computer science and assign probabilities to given sequences of words by means of a probability distribution. Statistical language models are key components of speech recognition systems and of many machine translation systems: they tell such systems which possible output word sequences are probable and which are improbable. The particular characteristic of a cache language model is that it contains a cache component and assigns relatively high probabilities to words or word sequences that occur elsewhere in a given text. The primary, but by no means sole, use of cache language models is in speech recognition systems. To understand why it is a good idea for a statistical language model to contain a cache component one might consider someone who is dictating a letter about elephants to a speech recognition system. Standard (non-cache) N-gram language models will assign a very low probability to the word "elephant" because it is a very rare word in English. If the speech recognition system does not contain a cache component, the person dictating the letter may be annoyed: each time the word "elephant" is spoken another sequence of words with a higher probability according to the N-gram language model may be recognized (e.g., "tell a plan"). These erroneous sequences will have to be deleted manually and replaced in the text by "elephant" each time "elephant" is spoken. If the system has a cache language model, "elephant" will still probably be misrecognized the first time it is spoken and will have to be entered into the text manually; however, from this point on the system is aware that "elephant" is likely to occur again – the estimated probability of occurrence of "elephant" has been increased, making it more likely that if it is spoken it will be recognized correctly. Once "elephant" has occurred several times, the system is likely to recognize it correctly every time it is spoken until the letter has been completely dictated. This increase in the probability assigned to the occurrence of "elephant" is an example of a consequence of machine learning and more specifically of pattern recognition. There exist variants of the cache language model in which not only single words but also multi-word sequences that have occurred previously are assigned higher probabilities (e.g., if "San Francisco" occurred near the beginning of the text subsequent instances of it would be assigned a higher probability). The cache language model was first proposed in a paper published in 1990, after which the IBM speech-recognition group experimented with the concept. The group found that implementation of a form of cache language model yielded a 24% drop in word-error rates once the first few hundred words of a document had been dictated. A detailed survey of language modeling techniques concluded that the cache language model was one of the few new language modeling techniques that yielded improvements over the standard N-gram approach: "Our caching results show that caching is by far the most useful technique for perplexity reduction at small and medium training data sizes". The development of the cache language model has generated considerable interest among those concerned with computational linguistics in general and statistical natural language processing in particular: recently, there has been interest in applying the cache language model in the field of statistical machine translation. The success of the cache language model in improving word prediction rests on the human tendency to use words in a "bursty" fashion: when one is discussing a certain topic in a certain context, the frequency with which one uses certain words will be quite different from their frequencies when one is discussing other topics in other contexts. The traditional N-gram language models, which rely entirely on information from a very small number (four, three, or two) of words preceding the word to which a probability is to be assigned, do not adequately model this "burstiness". Recently, the cache language model concept – originally conceived for the N-gram statistical language model paradigm – has been adapted for use in the neural paradigm. For instance, recent work on continuous cache language models in the recurrent neural network (RNN) setting has applied the cache concept to much larger contexts than before, yielding significant reductions in perplexity. Another recent line of research involves incorporating a cache component in a feed-forward neural language model (FN-LM) to achieve rapid domain adaptation.
Foundry VTT
Foundry Virtual Tabletop, commonly shortened to Foundry VTT or FVTT, is a commercial, self-hosted virtual tabletop application for role-playing games. It provides a stage for visualizing the game environment and tools allowing the game master and players to organize and track statistics and notes. The software is highly modular and depends on the community-maintained ecosystem of add-on modules that modify the software's behavior and implement different game systems. Perpetual licenses, which include updates, are offered for a one-time fee. == Features == Foundry Virtual Tabletop is a highly modular Node.js web application that is run locally by the Gamemaster or hosted on a remote server. Players connect to their gamemaster's Foundry VTT instance over the network using their web browser. It is system-agnostic in that its core feature-set is not restricted to a specific game system. Systems, specific features and game content are implemented as add-on modules, which can be individually downloaded from a public repository. The module repository contains paid, official content, as well as freely available community-made modules that enhance functionality of the software. As of May 2025, 350 individual game systems are implemented as modules. Individual settings created by the Game Master are termed Worlds in the interface and contain the list of modules that should be loaded as well as world-specific content, which can be added by the gamemaster. This content is grouped into Scenes, Actors, Items and Journals. Battle and world maps are created as Scenes, which contain the backdrop and data on placement of walls, light sources and other entities. Tokens representing Actors, which are player characters, vehicles or NPCs, can be placed on these Scenes to be moved by the user that owns them. Other entities that interact or integrate with actors are termed Items; these can be objects, but also game system-specific concepts such as character classes. Journals are text documents that can link to other entities present in the World or modules. Viewing and editing permissions can be set individually for each entity. The software features a custom lighting engine that determines visibility of certain areas on each battle map depending on the position of players' characters, also revealing areas covered by fog of war. It also contains tools for map creation and comes with a small asset library. == History == Foundry Gaming LLC founder Andrew Clayton, commonly known under his online nickname Atropos, began development of Foundry VTT in 2018 for personal use after becoming dissatisfied with the feature set and business models of other virtual tabletops. Foundry VTT was initially developed for Linux, which remains its primary platform, with support for other platforms having been developed later. Foundry Gaming LLC was incorporated in Spokane, Washington on October 9, 2018, with the software remaining in private beta-testing until May 2020, when it was publicly released. In November 2020, Cubicle 7 partnered with Foundry to bring official content modules for its game system Warhammer Fantasy Roleplay to Foundry VTT. Later, in 2025, Clayton would state that this first major publisher deal was of significant importance to Foundry VTT's growth and credits the community developers of the WFRP system module for making it possible in the first place. In November 2023, Paizo partnered with Foundry to bring official content modules for Pathfinder Roleplaying Game to Foundry VTT. In January 2024, Foundry publicly announced its partnership with Wizards of the Coast in bringing official Dungeons & Dragons content to Foundry VTT, with the first official module, Phandelver and Below: The Shattered Obelisk, having been released in February 2024. == Development == As of 2023, the Foundry VTT software itself is being developed and managed by a team of 9 people, while a content team of 12 people is working with partnered publishers to compile content into downloadable modules. The content team also develops in-house content published by Foundry Gaming LLC. Stated goals are to create a virtual tabletop software that offers a one-time purchase and content ownership, make use of modern web technologies, and provide a platform for developers to build upon. Clayton has stated that integration of Generative AI into Foundry VTT is not planned, citing ethical and legal concerns and calling its usage within the industry a "betrayal of the creative people who made the TTRPG industry what it is in the first place". == Reception == Foundry VTT is one of the most popular virtual tabletops for TTRPGs; in particular, as a self-hosted web-based VTT, it is known as a modern alternative to the software as a service Roll20. Wargamer named it one of the three "best virtual tabletops for D&D in 2023", noting its active community and high degree of technical complexity, which allows for customization not seen in other products at the cost of a much steeper learning curve. Comic Book Resources called it an "underrated gem" and "incredibly versatile" for similar reasons, while also praising its lighting engine and visual fidelity. As the previously mentioned outlets do, Foundry's modular ecosystem and technical implementation are often mentioned as good features, but also as a source of frustration for new users. In a video interview, Clayton acknowledges this issue and affirms that the development team intends to make usage of more technical features "friction-less" and will reduce module breakage between updates in the future.
Superquadrics
In mathematics, the superquadrics or super-quadrics (also superquadratics) are a family of geometric shapes defined by formulas that resemble those of ellipsoids and other quadrics, except that the squaring operations are replaced by arbitrary powers. They can be seen as the three-dimensional relatives of the superellipses. The term may refer to the solid object or to its surface, depending on the context. The equations below specify the surface; the solid is specified by replacing the equality signs by less-than-or-equal signs. The superquadrics include many shapes that resemble cubes, octahedra, cylinders, lozenges and spindles, with rounded or sharp corners. Because of their flexibility and relative simplicity, they are popular geometric modeling tools, especially in computer graphics. It becomes an important geometric primitive widely used in computer vision, robotics, and physical simulation. Some authors, such as Alan Barr, define "superquadrics" as including both the superellipsoids and the supertoroids. In modern computer vision literatures, superquadrics and superellipsoids are used interchangeably, since superellipsoids are the most representative and widely utilized shape among all the superquadrics. Comprehensive coverage of geometrical properties of superquadrics and methods of their recovery from range images and point clouds are covered in several computer vision literatures. == Formulas == === Implicit equation === The surface of the basic superquadric is given by | x | r + | y | s + | z | t = 1 {\displaystyle \left|x\right|^{r}+\left|y\right|^{s}+\left|z\right|^{t}=1} where r, s, and t are positive real numbers that determine the main features of the superquadric. Namely: less than 1: a pointy octahedron modified to have concave faces and sharp edges. exactly 1: a regular octahedron. between 1 and 2: an octahedron modified to have convex faces, blunt edges and blunt corners. exactly 2: a sphere greater than 2: a cube modified to have rounded edges and corners. infinite (in the limit): a cube Each exponent can be varied independently to obtain combined shapes. For example, if r=s=2, and t=4, one obtains a solid of revolution which resembles an ellipsoid with round cross-section but flattened ends. This formula is a special case of the superellipsoid's formula if (and only if) r = s. If any exponent is allowed to be negative, the shape extends to infinity. Such shapes are sometimes called super-hyperboloids. The basic shape above spans from -1 to +1 along each coordinate axis. The general superquadric is the result of scaling this basic shape by different amounts A, B, C along each axis. Its general equation is | x A | r + | y B | s + | z C | t = 1. {\displaystyle \left|{\frac {x}{A}}\right|^{r}+\left|{\frac {y}{B}}\right|^{s}+\left|{\frac {z}{C}}\right|^{t}=1.} === Parametric description === Parametric equations in terms of surface parameters u and v (equivalent to longitude and latitude if m equals 2) are x ( u , v ) = A g ( v , 2 r ) g ( u , 2 r ) y ( u , v ) = B g ( v , 2 s ) f ( u , 2 s ) z ( u , v ) = C f ( v , 2 t ) − π 2 ≤ v ≤ π 2 , − π ≤ u < π , {\displaystyle {\begin{aligned}x(u,v)&{}=Ag\left(v,{\frac {2}{r}}\right)g\left(u,{\frac {2}{r}}\right)\\y(u,v)&{}=Bg\left(v,{\frac {2}{s}}\right)f\left(u,{\frac {2}{s}}\right)\\z(u,v)&{}=Cf\left(v,{\frac {2}{t}}\right)\\&-{\frac {\pi }{2}}\leq v\leq {\frac {\pi }{2}},\quad -\pi \leq u<\pi ,\end{aligned}}} where the auxiliary functions are f ( ω , m ) = sgn ( sin ω ) | sin ω | m g ( ω , m ) = sgn ( cos ω ) | cos ω | m {\displaystyle {\begin{aligned}f(\omega ,m)&{}=\operatorname {sgn}(\sin \omega )\left|\sin \omega \right|^{m}\\g(\omega ,m)&{}=\operatorname {sgn}(\cos \omega )\left|\cos \omega \right|^{m}\end{aligned}}} and the sign function sgn(x) is sgn ( x ) = { − 1 , x < 0 0 , x = 0 + 1 , x > 0. {\displaystyle \operatorname {sgn}(x)={\begin{cases}-1,&x<0\\0,&x=0\\+1,&x>0.\end{cases}}} === Spherical product === Barr introduces the spherical product which given two plane curves produces a 3D surface. If f ( μ ) = ( f 1 ( μ ) f 2 ( μ ) ) , g ( ν ) = ( g 1 ( ν ) g 2 ( ν ) ) {\displaystyle f(\mu )={\begin{pmatrix}f_{1}(\mu )\\f_{2}(\mu )\end{pmatrix}},\quad g(\nu )={\begin{pmatrix}g_{1}(\nu )\\g_{2}(\nu )\end{pmatrix}}} are two plane curves then the spherical product is h ( μ , ν ) = f ( μ ) ⊗ g ( ν ) = ( f 1 ( μ ) g 1 ( ν ) f 1 ( μ ) g 2 ( ν ) f 2 ( μ ) ) {\displaystyle h(\mu ,\nu )=f(\mu )\otimes g(\nu )={\begin{pmatrix}f_{1}(\mu )\ g_{1}(\nu )\\f_{1}(\mu )\ g_{2}(\nu )\\f_{2}(\mu )\end{pmatrix}}} This is similar to the typical parametric equation of a sphere: x = x 0 + r sin θ cos φ y = y 0 + r sin θ sin φ ( 0 ≤ θ ≤ π , 0 ≤ φ < 2 π ) z = z 0 + r cos θ {\displaystyle {\begin{aligned}x&=x_{0}+r\sin \theta \;\cos \varphi \\y&=y_{0}+r\sin \theta \;\sin \varphi \qquad (0\leq \theta \leq \pi ,\;0\leq \varphi <2\pi )\\z&=z_{0}+r\cos \theta \end{aligned}}} which give rise to the name spherical product. Barr uses the spherical product to define quadric surfaces, like ellipsoids, and hyperboloids as well as the torus, superellipsoid, superquadric hyperboloids of one and two sheets, and supertoroids. == Plotting code == The following GNU Octave code generates a mesh approximation of a superquadric: