Dimensionality reduction, or dimension reduction, is the transformation of data from a high-dimensional space into a low-dimensional space so that the low-dimensional representation retains some meaningful properties of the original data, ideally close to its intrinsic dimension. Working in high-dimensional spaces can be undesirable for many reasons; raw data are often sparse as a consequence of the curse of dimensionality, and analyzing the data is usually computationally intractable. Dimensionality reduction is common in fields that deal with large numbers of observations and/or large numbers of variables, such as signal processing, speech recognition, neuroinformatics, and bioinformatics. Methods are commonly divided into linear and nonlinear approaches. Linear approaches can be further divided into feature selection and feature extraction. Dimensionality reduction can be used for noise reduction, data visualization, cluster analysis, or as an intermediate step to facilitate other analyses. == Feature selection == The process of feature selection aims to find a suitable subset of the input variables (features, or attributes) for the task at hand. The three strategies are: the filter strategy (e.g., information gain), the wrapper strategy (e.g., accuracy-guided search), and the embedded strategy (features are added or removed while building the model based on prediction errors). Data analysis such as regression or classification can be done in the reduced space more accurately than in the original space. == Feature projection == Feature projection (also called feature extraction) transforms the data from the high-dimensional space to a space of fewer dimensions. The data transformation may be linear, as in principal component analysis (PCA), but many nonlinear dimensionality reduction techniques also exist. For multidimensional data, tensor representation can be used in dimensionality reduction through multilinear subspace learning. === Principal component analysis (PCA) === The main linear technique for dimensionality reduction, principal component analysis, performs a linear mapping of the data to a lower-dimensional space in such a way that the variance of the data in the low-dimensional representation is maximized. In practice, the covariance (and sometimes the correlation) matrix of the data is constructed and the eigenvectors on this matrix are computed. The eigenvectors that correspond to the largest eigenvalues (the principal components) can now be used to reconstruct a large fraction of the variance of the original data. Moreover, the first few eigenvectors can often be interpreted in terms of the large-scale physical behavior of the system, because they often contribute the vast majority of the system's energy, especially in low-dimensional systems. Still, this must be proved on a case-by-case basis as not all systems exhibit this behavior. The original space (with dimension of the number of points) has been reduced (with data loss, but hopefully retaining the most important variance) to the space spanned by a few eigenvectors. === Non-negative matrix factorization (NMF) === NMF decomposes a non-negative matrix to the product of two non-negative ones, which has been a promising tool in fields where only non-negative signals exist, such as astronomy. NMF is well known since the multiplicative update rule by Lee & Seung, which has been continuously developed: the inclusion of uncertainties, the consideration of missing data and parallel computation, sequential construction which leads to the stability and linearity of NMF, as well as other updates including handling missing data in digital image processing. With a stable component basis during construction, and a linear modeling process, sequential NMF is able to preserve the flux in direct imaging of circumstellar structures in astronomy, as one of the methods of detecting exoplanets, especially for the direct imaging of circumstellar discs. In comparison with PCA, NMF does not remove the mean of the matrices, which leads to physical non-negative fluxes; therefore NMF is able to preserve more information than PCA as demonstrated by Ren et al. === Kernel PCA === Principal component analysis can be employed in a nonlinear way by means of the kernel trick. The resulting technique is capable of constructing nonlinear mappings that maximize the variance in the data. The resulting technique is called kernel PCA. === Graph-based kernel PCA === Other prominent nonlinear techniques include manifold learning techniques such as Isomap, locally linear embedding (LLE), Hessian LLE, Laplacian eigenmaps, and methods based on tangent space analysis. These techniques assume that the high-dimensional input data lies near a low-dimensional manifold embedded in the ambient space, and construct a low-dimensional representation using a cost function that retains local properties of the data; they can be viewed as defining a graph-based kernel for Kernel PCA. More recently, techniques have been proposed that, instead of defining a fixed kernel, try to learn the kernel using semidefinite programming. The most prominent example of such a technique is maximum variance unfolding (MVU). The central idea of MVU is to exactly preserve all pairwise distances between nearest neighbors (in the inner product space) while maximizing the distances between points that are not nearest neighbors. An alternative approach to neighborhood preservation is through the minimization of a cost function that measures differences between distances in the input and output spaces. Important examples of such techniques include: classical multidimensional scaling, which is identical to PCA; Isomap, which uses geodesic distances in the data space; diffusion maps, which use diffusion distances in the data space; t-distributed stochastic neighbor embedding (t-SNE), which minimizes the divergence between distributions over pairs of points; and curvilinear component analysis. A different approach to nonlinear dimensionality reduction is through the use of autoencoders, a special kind of feedforward neural networks with a bottleneck hidden layer. The training of deep encoders is typically performed using a greedy layer-wise pre-training (e.g., using a stack of restricted Boltzmann machines) that is followed by a finetuning stage based on backpropagation. === Linear discriminant analysis (LDA) === Linear discriminant analysis (LDA) is a generalization of Fisher's linear discriminant, a method used in statistics, pattern recognition, and machine learning to find a linear combination of features that characterizes or separates two or more classes of objects or events. === Generalized discriminant analysis (GDA) === GDA deals with nonlinear discriminant analysis using kernel function operator. The underlying theory is close to the support-vector machines (SVM) insofar as the GDA method provides a mapping of the input vectors into high-dimensional feature space. Similar to LDA, the objective of GDA is to find a projection for the features into a lower dimensional space by maximizing the ratio of between-class scatter to within-class scatter. === Autoencoder === Autoencoders can be used to learn nonlinear dimension reduction functions and codings together with an inverse function from the coding to the original representation. === t-SNE === T-distributed Stochastic Neighbor Embedding (t-SNE) is a nonlinear dimensionality reduction technique useful for the visualization of high-dimensional datasets. It is not recommended for use in analysis such as clustering or outlier detection since it does not necessarily preserve densities or distances well. === UMAP === Uniform manifold approximation and projection (UMAP) is a nonlinear dimensionality reduction technique. Visually, it is similar to t-SNE, but it assumes that the data is uniformly distributed on a locally connected Riemannian manifold and that the Riemannian metric is locally constant or approximately locally constant. == Dimension reduction == For high-dimensional datasets, dimension reduction is usually performed prior to applying a k-nearest neighbors (k-NN) algorithm in order to mitigate the curse of dimensionality. Feature extraction and dimension reduction can be combined in one step, using principal component analysis (PCA), linear discriminant analysis (LDA), canonical correlation analysis (CCA), or non-negative matrix factorization (NMF) techniques to pre-process the data, followed by clustering via k-NN on feature vectors in a reduced-dimension space. In machine learning, this process is also called low-dimensional embedding. For high-dimensional datasets (e.g., when performing similarity search on live video streams, DNA data, or high-dimensional time series), running a fast approximate k-NN search using locality-sensitive hashing, random projection, "sketches", or other high-dimensional similarity search techniques from the VLDB conference toolbox may be the only fe
Alibaba Cloud
Alibaba Cloud, also known as Aliyun (Chinese: 阿里云; pinyin: Ālǐyún; lit. 'Ali Cloud'), is a cloud computing company, a subsidiary of Alibaba Group. Alibaba Cloud provides cloud computing services to online businesses and Alibaba's own e-commerce ecosystem. Its international operations are registered and headquartered in Singapore. Alibaba Cloud offers cloud services that are available on a pay-as-you-go basis, and include elastic compute, data storage, relational databases, big-data processing, DDoS protection and content delivery networks (CDN). It is the largest cloud computing company in China, and in Asia Pacific according to Gartner. Alibaba Cloud operates data centers in 29 regions and 87 availability zones around the globe. As of June 2017, Alibaba Cloud is placed in the Visionaries' quadrant of Gartner's Magic Quadrant for cloud infrastructure as a service, worldwide. == History == Alibaba Cloud was founded in September 2009, and R&D centers and operation centers were opened in Hangzhou, Beijing, and Silicon Valley. === 2010–2013 === In November 2010, the company supported the first Single's Day (11.11) Taobao shopping festival, with 2.4 billion PageViews (PV) in 24 hours. Two years later, in November 2012, it became the first Chinese cloud service provider to pass ISO27001:2005 (Information Security Management System). In January 2013, Alibaba Cloud merged with HiChina (founded by Xiangning Zhang) for the www.net.cn business as one of the largest acquisitions in the company's history at the time. In August of that year, ApsaraDB architecture supported 5000 physical machines in a single cluster. === 2014–2017 === The company's Hong Kong data center went online in May 2014, and in December of that year, Alibaba Cloud defended a 14-hour-long DDoS attack, peaking at 453.8 Gbit/s. In July 2015, the Alibaba Group invested US$1 billion in Alibaba Cloud. A month later, Alibaba Cloud's first Singapore data center opened, and Singapore was announced as Alibaba Cloud's overseas headquarters. Two US data centers went online in October 2015, and that same month MaxCompute took the lead in the Sort Benchmark, sorting 100 TB data in 377s compared with Apache Spark's previous record of 1406s. The Alibaba Cloud Computing Conference was also held in October 2015 in Hangzhou and attracted over 20,000 developers. A month later, in November, the company supported the 11.11 shopping festival with a record of $14.2 billion transactions in 24 hours. Alibaba Cloud partnered with SK Holdings C&C in April 2016 to provide cloud services to Korean and Chinese companies. A month later, the company formalized a joint venture with SoftBank to launch cloud services in Japan that utilize technologies and solutions from Alibaba Cloud. In June 2016, Alibaba Cloud expanded its data center operations in Singapore with the establishment of a second availability zone. Alibaba Cloud also achieved two new certifications overseas: Singapore Multi-Tier Cloud Security (MTCS) standard Level 3, and the Payment Card Industry Three-Domain Secure (PCI 3DS). The company partnered with Vodafone Germany in November 2016 for Data Center operations and to provide cloud services to German and European companies. Alibaba became the official cloud services provider of the Olympics in January 2017. A month later, in February, the company became a founding Member of the EU Cloud Code of Conduct. In June 2017, Alibaba Cloud was placed in the Visionaries quadrant of Gartner's Magic Quadrant for Cloud Infrastructure as a Service, Worldwide. Alibaba Cloud partnered with Malaysia's Fusionex in September 2017 to provide cloud solutions in Southeast Asia, and the Malaysia data center commenced operations in October. That same month, the company partnered with Elastic and launched a new service called Alibaba Cloud Elasticsearch. Alibaba Cloud India data center commenced operations in December 2017. In addition, Alibaba Cloud received the C5 standard certification from the German Federal Office for Information Security (BSI) for its data centers in Germany and Singapore. === 2018–2021 === In February 2018, Alibaba Cloud's Indonesia data center commenced operations. The company's first data center opening in the Philippines in June 2021. Alibaba Cloud unveiled the ARM-based Yitian 710 chip, designed in-house, for use in its data centers in October 2021. On November 24, 2021, the bug Log4Shell was disclosed to Apache by Chen Zhaojun of Alibaba Cloud's Security Team. On December 22, 2021, the Chinese Ministry of Industry and Information Technology suspended a partnership with Alibaba Cloud for "failure in reporting cybersecurity vulnerabilities" related to the Log4Shell bug. === 2022 === In September 2022, Alibaba Cloud announced a $1 billion pledge to upgrade its global partner ecosystem. == Data center regions == Alibaba Cloud has 25 regional data centres globally. The Data Center in Germany is operated by Vodafone Germany (Frankfurt) and certified with C5. == Products == Alibaba Cloud provides cloud computing IaaS, PaaS, DBaaS and SaaS, including services such as e-commerce, big data, Database, IoT, Object storage (OSS), Kubernetes and data customization which can be managed from Alibaba web page or using aliyun command line tool. AnalyticDB was first released in May 2018, and the latest version 3.0 was released in 2019. On April 26, 2019, TPC published TPC-DS benchmark result of AnalyticDB. In 2019, a paper about the system design of AnalyticDB was published in VLDB conference 2019. == Academic partners == List of academic alliances: Shanghai Jiao Tong University Universiti Tunku Abdul Rahman (UTAR) University of Malaya Hong Kong Shue Yan University Macao University of Science and Technology Singapore University of Social Sciences (SUSS) Télécom Paris SUPINFO International University Université de technologie sino-européenne de l'université de Shanghai Gadjah Mada University Universitas Prasetiya Mulya Bina Nusantara University Krida Wacana Christian University Hong Kong Institute of Vocational Education Nanyang Polytechnic Republic Polytechnic Sekolah Tinggi Teknologi Informasi NIIT Usman Institute of Technology AISSMS Institute of Information Technology == Controversy == On October 26, 2016, Zhang Kai, CEO of ITHome issued an announcement stating he could no longer tolerate Alibaba Cloud's overselling and service interruption issues, and had migrated the hosting entirely to Baidu Cloud. Alibaba Cloud subsequently issued an apology letter, but indirectly mentioned that website performance should consider system architecture and avoid single-point design.
Leabra
Leabra stands for local, error-driven and associative, biologically realistic algorithm. It is a model of learning which is a balance between Hebbian and error-driven learning with other network-derived characteristics. This model is used to mathematically predict outcomes based on inputs and previous learning influences. Leabra is heavily influenced by and contributes to neural network designs and models, including emergent. == Background == It is the default algorithm in emergent (successor of PDP++) when making a new project, and is extensively used in various simulations. Hebbian learning is performed using conditional principal components analysis (CPCA) algorithm with correction factor for sparse expected activity levels. Error-driven learning is performed using GeneRec, which is a generalization of the recirculation algorithm, and approximates Almeida–Pineda recurrent backpropagation. The symmetric, midpoint version of GeneRec is used, which is equivalent to the contrastive Hebbian learning algorithm (CHL). See O'Reilly (1996; Neural Computation) for more details. The activation function is a point-neuron approximation with both discrete spiking and continuous rate-code output. Layer or unit-group level inhibition can be computed directly using a k-winners-take-all (KWTA) function, producing sparse distributed representations. A feedforward and feedback (FFFB) form of inhibition has now replaced the KWTA form of inhibition. FFFB inhibition can be efficiently implemented by using the average excitatory input and activity levels in a given layer. The net input is computed as an average, not a sum, over connections, based on normalized, sigmoidally transformed weight values, which are subject to scaling on a connection-group level to alter relative contributions. Automatic scaling is performed to compensate for differences in expected activity level in the different projections. Documentation about this algorithm can be found in the book "Computational Explorations in Cognitive Neuroscience: Understanding the Mind by Simulating the Brain" published by MIT press. and in the Emergent Documentation Archived 2009-04-16 at the Wayback Machine == Overview of the leabra algorithm == The pseudocode for Leabra is given here, showing exactly how the pieces of the algorithm described in more detail in the subsequent sections fit together. Iterate over minus and plus phases of settling for each event. o At start of settling, for all units: - Initialize all state variables (activation, v_m, etc.). - Apply external patterns (clamp input in minus, input & output in plus). - Compute net input scaling terms (constants, computed here so network can be dynamically altered). - Optimization: compute net input once from all static activations (e.g., hard-clamped external inputs). o During each cycle of settling, for all non-clamped units: - Compute excitatory netinput (g_e(t), aka eta_j or net) -- sender-based optimization by ignoring inactives. - Compute kWTA inhibition for each layer, based on g_i^Q: Sort units into two groups based on g_i^Q: top k and remaining k+1 -> n. If basic, find k and k+1th highest If avg-based, compute avg of 1 -> k & k+1 -> n. Set inhibitory conductance g_i from g^Q_k and g^Q_k+1 - Compute point-neuron activation combining excitatory input and inhibition o After settling, for all units, record final settling activations as either minus or plus phase (y^-_j or y^+_j). After both phases update the weights (based on linear current weight values), for all connections: o Compute error-driven weight changes with CHL with soft weight bounding o Compute Hebbian weight changes with CPCA from plus-phase activations o Compute net weight change as weighted sum of error-driven and Hebbian o Increment the weights according to net weight change. == Implementations == Emergent Archived 2015-10-03 at the Wayback Machine is the original implementation of Leabra; its most recent implementation is written in Go. It was written chiefly by Dr. O'Reilly, but professional software engineers were recently hired to improve the existing codebase. This is the fastest implementation, suitable for constructing large networks. Although emergent has a graphical user interface, it is very complex and has a steep learning curve. If you want to understand the algorithm in detail, it will be easier to read non-optimized code. For this purpose, check out the MATLAB version. There is also an R version available, that can be easily installed via install.packages("leabRa") in R and has a short introduction to how the package is used. The MATLAB and R versions are not suited for constructing very large networks, but they can be installed quickly and (with some programming background) are easy to use. Furthermore, they can also be adapted easily. == Special algorithms == Temporal differences and general dopamine modulation. Temporal differences (TD) is widely used as a model of midbrain dopaminergic firing. Primary value learned value (PVLV). PVLV simulates behavioral and neural data on Pavlovian conditioning and the midbrain dopaminergic neurons that fire in proportion to unexpected rewards (an alternative to TD). Prefrontal cortex basal ganglia working memory (PBWM). PBWM uses PVLV to train prefrontal cortex working memory updating system, based on the biology of the prefrontal cortex and basal ganglia.
Freddy II
Freddy (1969–1971) and Freddy II (1973–1976) were experimental robots built in the Department of Machine Intelligence and Perception (later Department of Artificial Intelligence, now part of the School of Informatics at the University of Edinburgh). == Technology == Technical innovations involving Freddy were at the forefront of the 70s robotics field. Freddy was one of the earliest robots to integrate vision, manipulation and intelligent systems as well as having versatility in the system and ease in retraining and reprogramming for new tasks. The idea of moving the table instead of the arm simplified the construction. Freddy also used a method of recognising the parts visually by using graph matching on the detected features. The system used an innovative collection of high level procedures for programming the arm movements which could be reused for each new task. == Lighthill controversy == In the mid 1970s there was controversy about the utility of pursuing a general purpose robotics programme in both the USA and the UK. A BBC TV programme in 1973, referred to as the "Lighthill Debate", pitched James Lighthill, who had written a critical report for the science and engineering research funding agencies in the UK, against Donald Michie from the University of Edinburgh and John McCarthy from Stanford University. The Edinburgh Freddy II and Stanford/SRI Shakey robots were used to illustrate the state-of-the-art at the time in intelligent robotics systems. == Freddy I and II == Freddy Mark I (1969–1971) was an experimental prototype, with 3 degrees-of-freedom created by a rotating platform driven by a pair of independent wheels. The other main components were a video camera and bump sensors connected to a computer. The computer moved the platform so that the camera could see and then recognise the objects. Freddy II (1973–1976) was a 5 degrees of freedom manipulator with a large vertical 'hand' that could move up and down, rotate about the vertical axis and rotate objects held in its gripper around one horizontal axis. Two remaining translational degrees of freedom were generated by a work surface that moved beneath the gripper. The gripper was a two finger pinch gripper. A video camera was added as well as later a light stripe generator. The Freddy and Freddy II projects were initiated and overseen by Donald Michie. The mechanical hardware and analogue electronics were designed and built by Stephen Salter (who also pioneered renewable energy from waves (see Salter's Duck)), and the digital electronics and computer interfacing were designed by Harry Barrow and Gregan Crawford. The software was developed by a team led by Rod Burstall, Robin Popplestone and Harry Barrow which used the POP-2 programming language, one of the world's first functional programming languages. The computing hardware was an Elliot 4130 computer with 384KB (128K 24-bit words) RAM and a hard disk linked to a small Honeywell H316 computer with 16KB of RAM which directly performed sensing and control. Freddy was a versatile system which could be trained and reprogrammed to perform a new task in a day or two. The tasks included putting rings on pegs and assembling simple model toys consisting of wooden blocks of different shapes, a boat with a mast and a car with axles and wheels. Information about part locations was obtained using the video camera, and then matched to previously stored models of the parts. It was soon realised in the Freddy project that the 'move here, do this, move there' style of robot behavior programming (actuator or joint level programming) is tedious and also did not allow for the robot to cope with variations in part position, part shape and sensor noise. Consequently, the RAPT robot programming language was developed by Pat Ambler and Robin Popplestone, in which robot behavior was specified at the object level. This meant that robot goals were specified in terms of desired position relationships between the robot, objects and the scene, leaving the details of how to achieve the goals to the underlying software system. Although developed in the 1970s RAPT is still considerably more advanced than most commercial robot programming languages. The team of people who contributed to the project were leaders in the field at the time and included Pat Ambler, Harry Barrow, Ilona Bellos, Chris Brown, Rod Burstall, Gregan Crawford, Jim Howe, Donald Michie, Robin Popplestone, Stephen Salter, Austin Tate and Ken Turner. Also of interest in the project was the use of a structured-light 3D scanner to obtain the 3D shape and position of the parts being manipulated. The Freddy II robot is currently on display at the Royal Museum in Edinburgh, Scotland, with a segment of the assembly video shown in a continuous loop.
Lumpers and splitters
Lumpers and splitters are opposing factions in any academic discipline that has to place individual examples into rigorously defined categories. The lumper–splitter problem occurs when there is the desire to create classifications and assign examples to them, for example, schools of literature, biological taxa, and so on. A "lumper" is a person who assigns examples broadly, judging that differences are not as important as signature similarities. A "splitter" makes precise definitions, and creates new categories to classify samples that differ in key ways. == Origin of the terms == The earliest known use of these terms was thought to be by Charles Darwin, in a letter to Joseph Dalton Hooker in 1857: "It is good to have hair-splitters & lumpers". But according to research done by the deputy director at NCSE, Glenn Branch, the credit is due to naturalist Edward Newman who wrote in 1845, "The time has arrived for discarding imaginary species, and the duty of doing this is as imperative as the admission of new ones when such are really discovered. The talents described under the respective names of 'hair-splitting' and 'lumping' are unquestionably yielding their power to the mightier power of Truth." They were then introduced more widely by George G. Simpson in his 1945 work The Principles of Classification and a Classification of Mammals. As he put it: splitters make very small units – their critics say that if they can tell two animals apart, they place them in different genera ... and if they cannot tell them apart, they place them in different species. ... Lumpers make large units – their critics say that if a carnivore is neither a dog nor a bear, they call it a cat. A later use can be found in the title of a 1969 paper "On lumpers and splitters ..." by the medical geneticist Victor McKusick. Reference to lumpers and splitters in the humanities appeared in a debate in 1975 between J. H. Hexter and Christopher Hill, in the Times Literary Supplement. It followed from Hexter's detailed review of Hill's book Change and Continuity in Seventeenth Century England, in which Hill developed Max Weber's argument that the rise of capitalism was facilitated by Calvinist Puritanism. Hexter objected to Hill's "mining" of sources to find evidence that supported his theories. Hexter argued that Hill plucked quotations from sources in a way that distorted their meaning. Hexter explained this as a mental habit that he called "lumping". According to him, "lumpers" rejected differences and chose to emphasise similarities. Any evidence that did not fit their arguments was ignored as aberrant. Splitters, by contrast, emphasised differences, and resisted simple schemes. While lumpers consistently tried to create coherent patterns, splitters preferred incoherent complexity. == Usage in various fields == === Biology === The categorisation and naming of a particular species should be regarded as a hypothesis about the evolutionary relationships and distinguishability of that group of organisms. As further information comes to hand, the hypothesis may be confirmed or refuted. Sometimes, especially in the past when communication was more difficult, taxonomists working in isolation have given two distinct names to individual organisms later identified as the same species. When two named species are agreed to be of the same species, the older species name is almost always retained dropping the newer species name honouring a convention known as "priority of nomenclature". This form of lumping is technically called synonymisation. Dividing a taxon into multiple, often new, taxa is called splitting. Taxonomists are often referred to as "lumpers" or "splitters" by their colleagues, depending on their personal approach to recognizing differences or commonalities between organisms. For example, the number of genera used in Pteridophyte Phylogeny Group I (PPG I) has proved controversial. PPG I uses 18 lycophyte and 319 fern genera. The earlier system put forward by Smith et al. (2006) had suggested a range of 274 to 312 genera for ferns alone. By contrast, the system of Christenhusz & Chase (2014) used 5 lycophyte and about 212 fern genera. The number of fern genera was further reduced to 207 in a subsequent publication. Defending PPG I, Schuettpelz et al. (2018) argue that the larger number of genera is a result of "the gradual accumulation of new collections and new data" and hence "a greater appreciation of fern diversity and ... an improved ability to distinguish taxa". They also argue that the number of species per genus in the PPG I system is already higher than in other groups of organisms (about 33 species per genus for ferns as opposed to about 22 species per genus for angiosperms) and that reducing the number of genera as Christenhusz and Chase propose yields the excessive number of about 50 species per genus for ferns. In response, Christenhusz and Chase (2018) argue that the excessive splitting of genera destabilises the usage of names and will lead to greater instability in future, and that the highly split genera have few if any characters that can be used to recognise them, making identification difficult, even to generic level. They further argue that comparing numbers of species per genus in different groups is "fundamentally meaningless". === History === In history, lumpers are those who tend to create broad definitions that cover large periods of time and many disciplines, whereas splitters want to assign names to tight groups of inter-relationships. Lumping tends to create a more and more unwieldy definition, with members having less and less mutually in common. This can lead to definitions which are little more than conventionalities, or groups which join fundamentally different examples. Splitting often leads to "distinctions without difference", ornate and fussy categories, and failure to see underlying similarities. For example, in the arts, "Romantic" can refer specifically to a period of German poetry roughly from 1780 to 1810, but would exclude the later work of Goethe, among other writers. In music it can mean every composer from Hummel through Rachmaninoff, plus many that came after. === Software modelling === Software engineering often proceeds by building models (sometimes known as model-driven architecture). A lumper is keen to generalise, and produces models with a small number of broadly defined objects. A splitter is reluctant to generalise, and produces models with a large number of narrowly defined objects. Conversion between the two styles is not necessarily symmetrical. For example, if error messages in two narrowly defined classes behave in the same way, the classes can be easily combined. But if some messages in a broad class behave differently, every object in the class must be examined before the class can be split. This illustrates the principle that "splits can be lumped more easily than lumps can be split". === Language classification === There is no agreement among historical linguists about what amount of evidence is needed for two languages to be safely classified in the same language family. For this reason, many proposed language families have had lumper–splitter controversies, including Altaic, Pama–Nyungan, Nilo-Saharan, and most of the larger families of the Americas. At a completely different level, the splitting of a mutually intelligible dialect continuum into different languages, or lumping them into one, is also an issue that continually comes up, though the consensus in contemporary linguistics is that there is no completely objective way to settle the question. Splitters regard the comparative method (meaning not comparison in general, but only reconstruction of a common ancestor or protolanguage) as the only valid proof of kinship, and consider genetic relatedness to be the question of interest. American linguists of recent decades tend to be splitters. Lumpers are more willing to admit techniques like mass lexical comparison or lexicostatistics, and mass typological comparison, and to tolerate the uncertainty of whether relationships found by these methods are the result of linguistic divergence (descent from common ancestor) or language convergence (borrowing). Much long-range comparison work has been from Russian linguists belonging to the Moscow School of Comparative Linguistics, most notably Vladislav Illich-Svitych and Sergei Starostin. In the United States, Greenberg and Ruhlen's work has been met with little acceptance from linguists. Earlier American linguists like Morris Swadesh and Edward Sapir also pursued large-scale classifications like Sapir's 1929 scheme for the Americas, accompanied by controversy similar to that today. === Religious studies === Paul F. Bradshaw suggests that the same principles of lumping and splitting apply to the study of early Christian liturgy. Lumpers, who tend to predominate in this field, try to find a single line of successive texts from the apostolic age to the
Glow (app)
Glow is a fertility awareness and period-tracking app. It is part of a suite of mobile apps focused on women's reproductive health and childcare, which includes Eve by Glow (a dedicated period tracker), Glow Nurture (a pregnancy tracker), and Glow Baby (a baby development tracker). The Glow company also operates an online shop that sells several fertility-related products, including ovulation test strips, pregnancy tests, and wearable breast pumps. In 2024, Glow was reported to have approximately 25 million users across its various apps and community message boards. == History == Glow debuted in August 2013 as an iOS app. It was founded by Michael Huang and Max Levchin and launched with $6 million in Series A funding from venture capital firms Founders Fund and Andreesen Horowitz. In 2014, Glow raised an additional $17 million in Series B funding, with Formation 8 joining existing investors. In 2015, Glow launched Ruby, an app dedicated to sexual health. That year, Wired reported that the company had added features to their apps allowing men to monitor their fertility. Glow subsequently released an additional set of apps focused on pregnancy tracking and infant development. In 2016, Glow reported that it had a total of approximately 3 million users; by 2018, this had grown to 15 million. Vox described it as one of the “big two” period and fertility tracking apps and the one that had started the “boom” in the femtech space. == Application and features == Glow was initially described as a fertility application that applied data-driven methods to menstrual and ovulation tracking. Core features include cycle logging, ovulation prediction, and symptom tracking. The app also provides educational content related to reproductive health and childcare, as well as a set of online message boards that allow individuals to share experiences and seek peer support. == Privacy and legal issues == Glow has received significant media attention for its privacy and security practices. In 2016, Consumer Reports identified potential exploits in the Glow app that they claimed could have exposed private user data to hackers. Glow subsequently reported that it had fixed the vulnerabilities and told The Washington Post they had no evidence that user data had been compromised. In September 2020, the California Attorney General announced a settlement with Glow related to Consumer Reports’ findings, which included a $250,000 civil penalty. Following the US Supreme Court's 2022 Dobbs v. Jackson ruling, which legalized state-level bans on abortion, Glow (and other fertility trackers, such as Clue and Flo) came under additional scrutiny over concerns that user data on abortions could be reported to law enforcement. After this surge of media interest, a research team affiliated with the University of New South Wales conducted an investigation into the privacy practices of several popular fertility apps, including Glow. Their review of Glow was mixed, noting that they provided several privacy settings and de-identified sensitive data, but that user information could still be disclosed in the future if the app was sold. Glow rejected that claim, telling the Australian Associated Press that it "did not share" personal data. The company also cited several internal security measures it had implemented and its apps' offline data protection setting, which allows users to permanently delete their health-related data. == Reception == In 2014, Fast Company reported that 20,000 women had used Glow to conceive. Later that year, The Guardian included Glow Nurture on its list of the best iPhone apps of 2014. Media coverage often praised Glow's array of menstrual tracking options, although some reviews also noted that fertility apps are not birth control tools and cautioned against relying on them for that purpose. In 2019, Cosmopolitan singled Glow's community of users as one of its standout features.
Repertory grid
The repertory grid is an interviewing technique which uses nonparametric factor analysis to determine an idiographic measure of personality. It was devised by George Kelly in around 1955 and is based on his personal construct theory of personality. == Introduction == The repertory grid is a technique for identifying the ways that a person construes (interprets or gives meaning to) his or her experience. It provides information from which inferences about personality can be made, but it is not a personality test in the conventional sense. It is underpinned by the personal construct theory developed by George Kelly, first published in 1955. A grid consists of four parts: A topic: it is about some part of the person's experience. A set of elements, which are examples or instances of the topic. Working as a clinical psychologist, Kelly was interested in how his clients construed people in the roles they adopted towards the client, and so, originally, such terms as "my father", "my mother", "an admired friend" and so forth were used. Since then, the grid has been used in much wider settings (educational, occupational, organisational) and so any well-defined set of words, phrases, or even brief behavioral vignettes can be used as elements. For example, to see how a person construes the purchase of a car, a list of vehicles within that person's price range could be a set of elements. A set of constructs. These are the basic terms that the client uses to make sense of the elements, and are always expressed as a contrast. Thus the meaning of "good" depends on whether you intend to say "good versus poor", as if you were construing a theatrical performance, or "good versus evil", as if you were construing the moral or ontological status of some more fundamental experience. A set of ratings of elements on constructs. Each element is positioned between the two extremes of the construct using a 5- or 7-point rating scale system; this is done repeatedly for all the constructs that apply; and thus its meaning to the client is modeled, and statistical analysis varying from simple counting, to more complex multivariate analysis of meaning, is made possible. Constructs are regarded as personal to the client, who is psychologically similar to other people depending on the extent to which they would tend to use similar constructs, and similar ratings, in relating to a particular set of elements. The client is asked to consider the elements three at a time, and to identify a way in which two of the elements might be seen as alike, but distinct from, contrasted to, the third. For example, in considering a set of people as part of a topic dealing with personal relationships, a client might say that the element "my father" and the element "my boss" are similar because they are both fairly tense individuals, whereas the element "my wife" is different because she is "relaxed". And so we identify one construct that the individual uses when thinking about people: whether they are "tense as distinct from relaxed". In practice, good grid interview technique would delve a little deeper and identify some more behaviorally explicit description of "tense versus relaxed". All the elements are rated on the construct, further triads of elements are compared and further constructs elicited, and the interview would continue until no further constructs are obtained. == Using the repertory grid == Careful interviewing to identify what the individual means by the words initially proposed, using a 5-point rating system could be used to characterize the way in which a group of fellow-employees are viewed on the construct "keen and committed versus energies elsewhere", a 1 indicating that the left pole of the construct applies ("keen and committed") and a 5 indicating that the right pole of the construct applies ("energies elsewhere"). On being asked to rate all of the elements, our interviewee might reply that Tom merits a 2 (fairly keen and committed), Mary a 1 (very keen and committed), and Peter a 5 (his energies are very much outside the place of employment). The remaining elements (another five people, for example) are then rated on this construct. Typically (and depending on the topic) people have a limited number of genuinely different constructs for any one topic: 6 to 16 are common when they talk about their job or their occupation, for example. The richness of people's meaning structures comes from the many different ways in which a limited number of constructs can be applied to individual elements. A person may indicate that Tom is fairly keen, very experienced, lacks social skills, is a good technical supervisor, can be trusted to follow complex instructions accurately, has no sense of humour, will always return a favour but only sometimes help his co-workers, while Mary is very keen, fairly experienced, has good social and technical supervisory skills, needs complex instructions explained to her, appreciates a joke, always returns favours, and is very helpful to her co-workers: these are two very different and complex pictures, using just 8 constructs about a person's co-workers. Important information can be obtained by including self-elements such as "Myself as I am now"; "Myself as I would like to be" among other elements, where the topic permits. == Analysis of results == A single grid can be analysed for both content (eyeball inspection) and structure (cluster analysis, principal component analysis, and a variety of structural indices relating to the complexity and range of the ratings being the chief techniques used). Sets of grids are dealt with using one or other of a variety of content analysis techniques. A range of associated techniques can be used to provide precise, operationally defined expressions of an interviewee's constructs, or a detailed expression of the interviewee's personal values, and all of these techniques are used in a collaborative way. The repertory grid is emphatically not a standardized "psychological test"; it is an exercise in the mutual negotiation of a person's meanings. The repertory grid has found favour among both academics and practitioners in a great variety of fields because it provides a way of describing people's construct systems (loosely, understanding people's perceptions) without prejudging the terms of reference—a kind of personalized grounded theory. Unlike a conventional rating-scale questionnaire, it is not the investigator but the interviewee who provides the constructs on which a topic is rated. Market researchers, trainers, teachers, guidance counsellors, new product developers, sports scientists, and knowledge capture specialists are among the users who find the technique (originally developed for use in clinical psychology) helpful. == Relationship to other tools == In the book Personal Construct Methodology, researchers Brian R. Gaines and Mildred L.G. Shaw noted that they "have also found concept mapping and semantic network tools to be complementary to repertory grid tools and generally use both in most studies" but that they "see less use of network representations in PCP [personal construct psychology] studies than is appropriate". They encouraged practitioners to use semantic network techniques in addition to the repertory grid.