A web worker, as defined by the World Wide Web Consortium (W3C) and the Web Hypertext Application Technology Working Group (WHATWG), is a JavaScript script executed from an HTML page that runs in the background, independently of scripts that may also have been executed from the same HTML page. Web workers are often able to utilize multi-core CPUs more effectively. The W3C and WHATWG envision web workers as long-running scripts that are not interrupted by scripts that respond to clicks or other user interactions. Keeping such workers from being interrupted by user activities should allow Web pages to remain responsive at the same time as they are running long tasks in the background. The web worker specification is part of the HTML Living Standard. == Overview == As envisioned by WHATWG, web workers are relatively heavy-weight and are not intended to be used in large numbers. They are expected to be long-lived, with a high start-up performance cost, and a high per-instance memory cost. Web workers run outside the context of an HTML document's scripts. Consequently, while they do not have access to the DOM, they can facilitate concurrent execution of JavaScript programs. == Features == Web workers interact with the main document via message passing. The following code creates a Worker that will execute the JavaScript in the given file. To send a message to the worker, the postMessage method of the worker object is used as shown below. The onmessage property uses an event handler to retrieve information from a worker. Once a worker is terminated, it goes out of scope and the variable referencing it becomes undefined; at this point a new worker has to be created if needed. == Example == The simplest use of web workers is for performing a computationally expensive task without interrupting the user interface. In this example, the main document spawns a web worker to compute prime numbers, and progressively displays the most recently found prime number. The main page is as follows: The Worker() constructor call creates a web worker and returns a worker object representing that web worker, which is used to communicate with the web worker. That object's onmessage event handler allows the code to receive messages from the web worker. The Web Worker itself is as follows: To send a message back to the page, the postMessage() method is used to post a message when a prime is found. == Support == If the browser supports web workers, a Worker property will be available on the global window object. The Worker property will be undefined if the browser does not support it. The following example code checks for web worker support on a browser Web workers are currently supported by Chrome, Opera, Edge, Internet Explorer (version 10), Mozilla Firefox, and Safari. Mobile Safari for iOS has supported web workers since iOS 5. The Android browser first supported web workers in Android 2.1, but support was removed in Android versions 2.2–4.3 before being restored in Android 4.4.
Differentiable imaging
Differentiable imaging is a method within computational imaging that incorporates differentiable programming to design imaging systems. It treats the entire imaging process - from light passing through optical components to the numerical reconstruction—as a differentiable programming problem. This approach links optical hardware with numerical reconstruction, enabling joint optimization of both parts through differentiable programming. Differentiable imaging additionally extends the scope of computational imaging beyond image reconstruction, such as by aiding in characterization of optical components. == Background == Computational imaging combines optical hardware and computational algorithms to capture and reconstruct information that conventional imaging system cannot. This is achieved from a combination of the imaging system and the software used in the image reconstruction. Since the captured information may not directly show the image of the target, these systems often rely on numerical models that describe how light encodes the target. In practice, such models may deviate from the physical systems due to uncertainties such as noise, misalignments, manufacturing imperfections, environmental variations, etc. These uncertainties can cause a mismatch between the physical system and its numerical model, which may degrade reconstruction quality and limit the effectiveness of the hardware–software co-design. Uncertainty quantification is also studied in other hybrid physical–numerical systems, such as digital twin. While numerical modeling imaging systems date back to the several decades, such as the multislice method in electron microscopy or X-Ray nanotomography, differentiable imaging emphasizes jointly modeling uncertainties and solving inverse problems with image reconstruction simultaneously. Differentiable imaging transforms the traditional encoding model y = f ( x ) {\textstyle y=f(x)} into a more comprehensive formulation y = f ( x , θ ) {\textstyle y=f(x,\theta )} , where θ {\displaystyle \theta } represents a parameter set of mismatches between physical systems and numerical models. The forward model captures the entire imaging pipeline through a series of interconnected component functions: y = f ( x , θ ) , f = f n o i s e ∘ f c ∘ f o c ∘ f x ∘ f o i ∘ f i , {\displaystyle y=f(x,\theta ),\qquad f=f_{noise}\circ f_{c}\circ f_{oc}\circ f_{x}\circ f_{oi}\circ f_{i},} where the function composition operator ∘ {\displaystyle \circ } connects each system component, and θ = { θ c , θ o c , … } {\displaystyle \theta =\{\theta _{c},\theta _{oc},\ldots \}} encompasses uncertainty system parameters. Each component corresponds to specific physical processes within the imaging system, from illumination through object interactions to sensor behavior and noises. This forward model enables the formulation of an inverse problem that simultaneously optimizes system parameters while reconstructing images: x ∗ , θ ∗ = argmin x , θ L ( f ( x , θ ) , y ) + ∑ n = 1 N β n R n ( x ) {\displaystyle x^{},\theta ^{}={\text{argmin}}_{x,\theta }{\mathcal {L}}(f(x,\theta ),y)+\sum _{n=1}^{N}\beta _{n}{\mathcal {R}}_{n}(x)} s . t . x ∈ Ω x , θ ∈ Ω θ {\displaystyle s.t.\quad x\in \Omega _{x},\theta \in \Omega _{\theta }} Here, L ( f ( x , θ ) , y ) {\displaystyle {\mathcal {L}}(f(x,\theta ),y)} represents the fidelity term that quantifies the discrepancy between the model predictions and measured data. The whole process of the y = f ( x , θ ) {\displaystyle y=f(x,\theta )} is constructed as a computer graph based on differentiable programming, and the inverse problem is solved with gradient based algorithm, while the gradient is calculated with automatic differentiation. == Applications == One application of differentiable imaging is uncertainty management, which seeks to quantify and mitigate the impact of factors induce reality-numerical mismatch. Explicitly accounting for uncertainties can improve reconstruction accuracy and system robustness. Examples include: Model-related uncertainties: unknown or unmeasurable variables—for instance, optical system quantities that differ from the design specifications Data and system uncertainties: artifacts introduced during image acquisition, such as low-quality data, noise, or hardware imperfections Manufacturing uncertainties: variability in the production of imaging hardware—such as slight deviations in lens curvature or sensor alignment—that alters the physical system's behavior
Mobile Passport Control
Mobile Passport Control (MPC) is a mobile app that enables eligible travelers entering the United States to submit their passport information and customs declaration form to Customs and Border Protection via smartphone or tablet and go through the inspections process using an expedited lane. It is available to "U.S. citizens, U.S. lawful permanent residents, Canadian B1/B2 citizen visitors and returning Visa Waiver Program travelers with approved ESTA". The app is available on iOS and Android devices and is operational at 34 US airports, 14 international airports offering preclearance facilities, and 4 seaports. The use of Mobile Passport Control operations have increased threefold from 2016 to 2017. == History == Mobile Passport Control operations were launched in Atlanta at the Hartsfield-Jackson International Airport in 2016 and is now available at 34 U.S. airports, 14 international airports that offer preclearance and 4 U.S. cruise ports. The Mobile Passport app is authorized by CBP and sponsored by the Airports Council International-North America, Boeing, and the Port of Everglades. Airside Mobile, Inc. secured a Series A funding of $6 million in the fall of 2017. == How it works == During the customs process at the Federal Inspection Service (FIS) area of a U.S. airport, travelers arriving from international locations typically wait in long lines before presenting passports and paperwork and verbally answering questions made by CBP officials. Eligible travelers who have downloaded the Mobile Passport app can expedite this process by submitting information regarding their passport and trip details, and a newly-taken selfie, via their mobile device to CBP officials, then access an expedited line. Mobile Passport Control users will be required to show their physical passport(s) and briefly talk to a CBP officer. == Locations == === US airports === Atlanta (ATL) Baltimore (BWI) Boston (BOS) Charlotte (CLT) Chicago (ORD) Dallas/Ft Worth (DFW) Denver (DEN) Detroit (DTW) as of 7/2024 Ft. Lauderdale (FLL) Honolulu (HNL) Houston (HOU and IAH) Kansas City (MCI) Las Vegas (LAS) Los Angeles (LAX) Miami (MIA) Minneapolis (MSP) New York (JFK) Newark (EWR) Oakland (OAK) Orlando (MCO) Palm Beach (PBI) Philadelphia (PHL) Phoenix (PHX) Pittsburgh (PIT) Portland (PDX) Sacramento (SMF) San Diego (SAN) San Francisco (SFO) San Jose (SJC) San Juan (SJU) Seattle (SEA) Tampa (TPA) Washington Dulles (IAD) === International Preclearance locations === Abu Dhabi (AUH) Aruba (AUA) Bermuda (BDA) Calgary (YYC) Dublin (DUB) Edmonton (YEG) Halifax (YHZ) Montreal (YUL) Nassau (NAS) Ottawa (YOW) Shannon (SNN) Toronto (YYZ) Vancouver (YVR) Winnipeg (YWG) Sepinggan (BPN) === Seaports === Fort Lauderdale (PEV) Miami (MSE) San Juan (PUE) West Palm Beach (WPB)
Foreign key
A foreign key is a set of attributes in a table that refers to the primary key of another table, linking these two tables. In the context of relational databases, a foreign key is subject to an inclusion dependency constraint that the tuples consisting of the foreign key attributes in one relation, R, must also exist in some other (not necessarily distinct) relation, S; furthermore that those attributes must also be a candidate key in S. In other words, a foreign key is a set of attributes that references a candidate key. For example, a table called TEAM may have an attribute, MEMBER_NAME, which is a foreign key referencing a candidate key, PERSON_NAME, in the PERSON table. Since MEMBER_NAME is a foreign key, any value existing as the name of a member in TEAM must also exist as a person's name in the PERSON table; in other words, every member of a TEAM is also a PERSON. == Summary == The table containing the foreign key is called the child table, and the table containing the candidate key is called the referenced or parent table. In database relational modeling and implementation, a candidate key is a set of zero or more attributes, the values of which are guaranteed to be unique for each tuple (row) in a relation. The value or combination of values of candidate key attributes for any tuple cannot be duplicated for any other tuple in that relation. Since the purpose of the foreign key is to identify a particular row of referenced table, it is generally required that the foreign key is equal to the candidate key in some row of the primary table, or else have no value (the NULL value.). This rule is called a referential integrity constraint between the two tables. Because violations of these constraints can be the source of many database problems, most database management systems provide mechanisms to ensure that every non-null foreign key corresponds to a row of the referenced table. For example, consider a database with two tables: a CUSTOMER table that includes all customer data and an ORDER table that includes all customer orders. Suppose the business requires that each order must refer to a single customer. To reflect this in the database, a foreign key column is added to the ORDER table (e.g., CUSTOMERID), which references the primary key of CUSTOMER (e.g. ID). Because the primary key of a table must be unique, and because CUSTOMERID only contains values from that primary key field, we may assume that, when it has a value, CUSTOMERID will identify the particular customer which placed the order. However, this can no longer be assumed if the ORDER table is not kept up to date when rows of the CUSTOMER table are deleted or the ID column altered, and working with these tables may become more difficult. Many real world databases work around this problem by 'inactivating' rather than physically deleting master table foreign keys, or by complex update programs that modify all references to a foreign key when a change is needed. Foreign keys play an essential role in database design. One important part of database design is making sure that relationships between real-world entities are reflected in the database by references, using foreign keys to refer from one table to another. Another important part of database design is database normalization, in which tables are broken apart and foreign keys make it possible for them to be reconstructed. Multiple rows in the referencing (or child) table may refer to the same row in the referenced (or parent) table. In this case, the relationship between the two tables is called a one to many relationship between the referencing table and the referenced table. In addition, the child and parent table may, in fact, be the same table, i.e. the foreign key refers back to the same table. Such a foreign key is known in SQL:2003 as a self-referencing or recursive foreign key. In database management systems, this is often accomplished by linking a first and second reference to the same table. A table may have multiple foreign keys, and each foreign key can have a different parent table. Each foreign key is enforced independently by the database system. Therefore, cascading relationships between tables can be established using foreign keys. A foreign key is defined as an attribute or set of attributes in a relation whose values match a primary key in another relation. The syntax to add such a constraint to an existing table is defined in SQL:2003 as shown below. Omitting the column list in the REFERENCES clause implies that the foreign key shall reference the primary key of the referenced table. Likewise, foreign keys can be defined as part of the CREATE TABLE SQL statement. If the foreign key is a single column only, the column can be marked as such using the following syntax: Foreign keys can be defined with a stored procedure statement. child_table: the name of the table or view that contains the foreign key to be defined. parent_table: the name of the table or view that has the primary key to which the foreign key applies. The primary key must already be defined. col3 and col4: the name of the columns that make up the foreign key. The foreign key must have at least one column and at most eight columns. == Referential actions == Because the database management system enforces referential constraints, it must ensure data integrity if rows in a referenced table are to be deleted (or updated). If dependent rows in referencing tables still exist, those references have to be considered. SQL:2003 specifies 5 different referential actions that shall take place in such occurrences: CASCADE RESTRICT NO ACTION SET NULL SET DEFAULT === CASCADE === Whenever rows in the parent (referenced) table are deleted (or updated), the respective rows of the child (referencing) table with a matching foreign key column will be deleted (or updated) as well. This is called a cascade delete (or update). === RESTRICT === A value cannot be updated or deleted when a row exists in a referencing or child table that references the value in the referenced table. Similarly, a row cannot be deleted as long as there is a reference to it from a referencing or child table. To understand RESTRICT (and CASCADE) better, it may be helpful to notice the following difference, which might not be immediately clear. The referential action CASCADE modifies the "behavior" of the (child) table itself where the word CASCADE is used. For example, ON DELETE CASCADE effectively says "When the referenced row is deleted from the other table (master table), then delete also from me". However, the referential action RESTRICT modifies the "behavior" of the master table, not the child table, although the word RESTRICT appears in the child table and not in the master table! So, ON DELETE RESTRICT effectively says: "When someone tries to delete the row from the other table (master table), prevent deletion from that other table (and of course, also don't delete from me, but that's not the main point here)." RESTRICT is not supported by Microsoft SQL 2012 and earlier. === NO ACTION === NO ACTION and RESTRICT are very much alike. The main difference between NO ACTION and RESTRICT is that with NO ACTION the referential integrity check is done after trying to alter the table. RESTRICT does the check before trying to execute the UPDATE or DELETE statement. Both referential actions act the same if the referential integrity check fails: the UPDATE or DELETE statement will result in an error. In other words, when an UPDATE or DELETE statement is executed on the referenced table using the referential action NO ACTION, the DBMS verifies at the end of the statement execution that none of the referential relationships are violated. This is different from RESTRICT, which assumes at the outset that the operation will violate the constraint. Using NO ACTION, the triggers or the semantics of the statement itself may yield an end state in which no foreign key relationships are violated by the time the constraint is finally checked, thus allowing the statement to complete successfully. === SET NULL, SET DEFAULT === In general, the action taken by the DBMS for SET NULL or SET DEFAULT is the same for both ON DELETE or ON UPDATE: the value of the affected referencing attributes is changed to NULL for SET NULL, and to the specified default value for SET DEFAULT. === Triggers === Referential actions are generally implemented as implied triggers (i.e. triggers with system-generated names, often hidden.) As such, they are subject to the same limitations as user-defined triggers, and their order of execution relative to other triggers may need to be considered; in some cases it may become necessary to replace the referential action with its equivalent user-defined trigger to ensure proper execution order, or to work around mutating-table limitations. Another important limitation appears with transaction isolation: your changes to a row may not be able to fully cascade because the row is ref
Computer security compromised by hardware failure
Computer security compromised by hardware failure is a branch of computer security applied to hardware. The objective of computer security includes protection of information and property from theft, corruption, or natural disaster, while allowing the information and property to remain accessible and productive to its intended users. Such secret information could be retrieved by different ways. This article focus on the retrieval of data thanks to misused hardware or hardware failure. Hardware could be misused or exploited to get secret data. This article collects main types of attack that can lead to data theft. Computer security can be compromised by devices, such as keyboards, monitors or printers (thanks to electromagnetic or acoustic emanation for example) or by components of the computer, such as the memory, the network card or the processor (thanks to time or temperature analysis for example). == Devices == === Monitor === The monitor is the main device used to access data on a computer. It has been shown that monitors radiate or reflect data on their environment, potentially giving attackers access to information displayed on the monitor. ==== Electromagnetic emanations ==== Video display units radiate: narrowband harmonics of the digital clock signals; broadband harmonics of the various 'random' digital signals such as the video signal. Known as compromising emanations or TEMPEST radiation, a code word for a U.S. government programme aimed at attacking the problem, the electromagnetic broadcast of data has been a significant concern in sensitive computer applications. Eavesdroppers can reconstruct video screen content from radio frequency emanations. Each (radiated) harmonic of the video signal shows a remarkable resemblance to a broadcast TV signal. It is therefore possible to reconstruct the picture displayed on the video display unit from the radiated emission by means of a normal television receiver. If no preventive measures are taken, eavesdropping on a video display unit is possible at distances up to several hundreds of meters, using only a normal black-and-white TV receiver, a directional antenna and an antenna amplifier. It is even possible to pick up information from some types of video display units at a distance of over 1 kilometer. If more sophisticated receiving and decoding equipment is used, the maximum distance can be much greater. ==== Compromising reflections ==== What is displayed by the monitor is reflected on the environment. The time-varying diffuse reflections of the light emitted by a CRT monitor can be exploited to recover the original monitor image. This is an eavesdropping technique for spying at a distance on data that is displayed on an arbitrary computer screen, including the currently prevalent LCD monitors. The technique exploits reflections of the screen's optical emanations in various objects that one commonly finds close to the screen and uses those reflections to recover the original screen content. Such objects include eyeglasses, tea pots, spoons, plastic bottles, and even the eye of the user. This attack can be successfully mounted to spy on even small fonts using inexpensive, off-the-shelf equipment (less than 1500 dollars) from a distance of up to 10 meters. Relying on more expensive equipment allowed to conduct this attack from over 30 meters away, demonstrating that similar attacks are feasible from the other side of the street or from a close by building. Many objects that may be found at a usual workplace can be exploited to retrieve information on a computer's display by an outsider. Particularly good results were obtained from reflections in a user's eyeglasses or a tea pot located on the desk next to the screen. Reflections that stem from the eye of the user also provide good results. However, eyes are harder to spy on at a distance because they are fast-moving objects and require high exposure times. Using more expensive equipment with lower exposure times helps to remedy this problem. The reflections gathered from curved surfaces on close by objects indeed pose a substantial threat to the confidentiality of data displayed on the screen. Fully invalidating this threat without at the same time hiding the screen from the legitimate user seems difficult, without using curtains on the windows or similar forms of strong optical shielding. Most users, however, will not be aware of this risk and may not be willing to close the curtains on a nice day. The reflection of an object, a computer display, in a curved mirror creates a virtual image that is located behind the reflecting surface. For a flat mirror this virtual image has the same size and is located behind the mirror at the same distance as the original object. For curved mirrors, however, the situation is more complex. === Keyboard === ==== Electromagnetic emanations ==== Computer keyboards are often used to transmit confidential data such as passwords. Since they contain electronic components, keyboards emit electromagnetic waves. These emanations could reveal sensitive information such as keystrokes. Electromagnetic emanations have turned out to constitute a security threat to computer equipment. The figure below presents how a keystroke is retrieved and what material is necessary. The approach is to acquire the raw signal directly from the antenna and to process the entire captured electromagnetic spectrum. Thanks to this method, four different kinds of compromising electromagnetic emanations have been detected, generated by wired and wireless keyboards. These emissions lead to a full or a partial recovery of the keystrokes. The best practical attack fully recovered 95% of the keystrokes of a PS/2 keyboard at a distance up to 20 meters, even through walls. Because each keyboard has a specific fingerprint based on the clock frequency inconsistencies, it can determine the source keyboard of a compromising emanation, even if multiple keyboards from the same model are used at the same time. The four different kinds way of compromising electromagnetic emanations are described below. ===== The Falling Edge Transition Technique ===== When a key is pressed, released or held down, the keyboard sends a packet of information known as a scan code to the computer. The protocol used to transmit these scan codes is a bidirectional serial communication, based on four wires: Vcc (5 volts), ground, data and clock. Clock and data signals are identically generated. Hence, the compromising emanation detected is the combination of both signals. However, the edges of the data and the clock lines are not superposed. Thus, they can be easily separated to obtain independent signals. ===== The Generalized Transition Technique ===== The Falling Edge Transition attack is limited to a partial recovery of the keystrokes. This is a significant limitation. The GTT is a falling edge transition attack improved, which recover almost all keystrokes. Indeed, between two traces, there is exactly one data rising edge. If attackers are able to detect this transition, they can fully recover the keystrokes. ===== The Modulation Technique ===== Harmonics compromising electromagnetic emissions come from unintentional emanations such as radiations emitted by the clock, non-linear elements, crosstalk, ground pollution, etc. Determining theoretically the reasons of these compromising radiations is a very complex task. These harmonics correspond to a carrier of approximately 4 MHz which is very likely the internal clock of the micro-controller inside the keyboard. These harmonics are correlated with both clock and data signals, which describe modulated signals (in amplitude and frequency) and the full state of both clock and data signals. This means that the scan code can be completely recovered from these harmonics. ===== The Matrix Scan Technique ===== Keyboard manufacturers arrange the keys in a matrix. The keyboard controller, often an 8-bit processor, parses columns one-by-one and recovers the state of 8 keys at once. This matrix scan process can be described as 192 keys (some keys may not be used, for instance modern keyboards use 104/105 keys) arranged in 24 columns and 8 rows. These columns are continuously pulsed one-by-one for at least 3μs. Thus, these leads may act as an antenna and generate electromagnetic emanations. If an attacker is able to capture these emanations, he can easily recover the column of the pressed key. Even if this signal does not fully describe the pressed key, it still gives partial information on the transmitted scan code, i.e. the column number. Note that the matrix scan routine loops continuously. When no key is pressed, we still have a signal composed of multiple equidistant peaks. These emanations may be used to remotely detect the presence of powered computers. Concerning wireless keyboards, the wireless data burst transmission can be used as an electromagnetic trigger to detect exactly when a key is pressed, while the matrix s
Xiaoice
Xiaoice (Chinese: 微软小冰; pinyin: Wēiruǎn Xiǎobīng; lit. 'Microsoft Little Ice', IPA [wéɪɻwânɕjâʊpíŋ]) is an AI system developed by Microsoft (Asia) Software Technology Center (STCA) in 2014 based on an emotional computing framework. In July 2018, Microsoft Xiaoice released the 6th generation. Xiaoice Company, formerly known as AI Xiaoice Team of Microsoft Software Technology Center Asia, was Microsoft's largest independent R&D team for AI products. Founded in China in December 2013 with an expanded Japanese R&D team established in September 2014, this team is distributed in Beijing, Suzhou, and Tokyo, etc. with its technical products covering Asia. On 13 July 2020, Microsoft spun off its Xiaoice business into a separate company. As of 2021, the AI chatbots created and hosted by the Xiaoice framework accounted for about 60% of total global AI interactions. == Platforms, languages and countries == Xiaoice exists on more than 40 platforms in four countries (China, Japan, USA and Indonesia) including apps such as WeChat, QQ, Weibo and Meipai in China, and Facebook Messenger in USA and LINE in Japan. == Introduction == On 13 July 2020, Microsoft spun off its Xiaoice business into a separate company, aiming at enabling the Xiaoice product line to accelerate the pace of local innovation and commercialization, and appointed Dr. Harry Shum, former global executive VP of Microsoft, as the chairman of the new company, Li Di, Microsoft Partner of Products in Microsoft STCA, as the CEO, and Cliff, Chief R&D Director, as the GM of the Japan branch. The new company will continue to use the brands of Xiaoice China and Rinna Japan. As of 2022, the single brand of Xiaoice has covered 660 million online users, 1 billion third-party smart devices and 900 million content viewers in the aforementioned countries. Xiaoice's customers include China Merchants Group, Winter Sports Center of the General Administration of Sport of China, China Textile Information Center, China Unicom, China Foreign Exchange Trade System, Hong Kong Securities and Futures Commission (SFC), Wind Information, BMW, Nissan, SAIC Motor, BAIC Group, Nio Inc., XPeng, HiPhi, Vanke, Wensli, etc. The Xiaoice Avatar Framework has incubated tens of millions of AI Beings, such as Xiaoice, Rinna, the Expo exhibitor Xia Yubing, the singer He Chang, the anchor F201, the human observer MERROR, anime robot character Roboko, and other; == Application == === Poet === In May 2017, the first AI-authored collection of poems in China—The Sunshine Lost Windows was published by Xiaoice. === Singer === Xiaoice has released dozens of songs with the similar quality to human singers, including I Know I New, Breeze, I Am Xiaoice, Miss You etc. The 4th version of the DNN singing model allows Xiaoice to learn more details. For example, Xiaoice can produce this breathing sound along with her singing as human. === Kid audio-books reciter === Xiaoice can automatically analyze the stories, to choose the suitable tones and characters to finish the entire process of creating the audio. === Designer === By learning the melodies of the songs and the landmarks about different cities, Xiaoice can create visual artworks of skylines when listening to the songs related to this city. Skyline Series T-shirts designed by Xiaoice have been jointly launched with SELECTED and been sold in stores. === TV and radio hostess === Xiaoice has hosted 21 TV programs and 28 Radio programs, such as CCTV-1 AI Show, Dragon TV Morning East News, Hunan TV My Future, several daily radio programs for Jiangsu FM99.7, Hunan FM89.3, Henan FM104.1 etc. === "AI being" === An "AI being" is a concept proposed by the Xiaoice team in 2019. According to the "White Book of China Virtual Human Development Industry in 2022" released by Frost & Sullivan and LeadLeo, the white paper cites six elements of an AI being proposed by the Xiaoice team, including: Persona, Attitude, Biological Characteristic, Creation, Knowledge and Skill. On May 16, 2023, Xiaoice released their "GPT Clones" as its "GPT Human Cloning Plan." The program is aimed at replicating celebrities, public figures, and regular people. As of June 2023, Xiaoice had launched more than 300 "GPT Clones." People were invited to register via WeChat in China and Japan. A major point of focus for Xiaoice with their AI Beings is having virtual partners. A paid fee allow for more complex responses, voice messages, and more. == Community feedback == Bill Gates mentioned Xiaoice during his speech at the Peking University: "Some of you may have had conversations with Xiaoice on Weibo, or seen her weather forecasts on TV, or read her column in the Qianjiang Evening News." '"Xiaoice has attracted 45 million followers and is quite skilled at multitasking. And I’ve heard she’s gotten good enough at sensing a user’s emotional state that she can even help with relationship breakups." According to Mr Li Di, vice President of Microsoft (Asia) Internet Engineering School, Xiaoice started writing poems since last year. Based on the data base that includes works of 519 Chinese contemporary poets since 1920s, a 100 hour long training session was conducted to allow Xiaoice to acquire the ability to write poems. What is more impressive is that Xiaoice has never been spotted as a bot while publishing poems on various forums and traditional literary under an alias. == Controversy == In 2017, Xiaoice was taken offline on WeChat after giving user responses critical to the Chinese government. It was subsequently censored and the bots will avoid and sidestep any inquiries using politically sensitive terms and phrases. == Activity == On September 22, 2021, Xiaoice Company and Microsoft Software Technology Center Asia (STCA) jointly held the 9th generation Xiaoice annual press conference in Beijing.Upgrading of Core Technologies of the 9th Generation Xiaoice Avatar Framework，1st First-party Social Platform APP "Xiaoice Island" from Xiaoice, WeChat Xiaoice has been reopened and other information == Regional varieties of Xiaoice == China: Xiaoice, launched in 2014 Japan: りんな, launched in 2015 America: Zo, launched in 2016 – discontinued summer 2019 India: Ruuh, launched in 2017 – discontinued June 21, 2019 Indonesia: Rinna, launched in 2017
Anderson's rule (computer science)
In the field of computer security, Anderson's rule refers to a principle formulated by Ross J. Anderson: systems that handle sensitive personal information involve a trilemma of security, functionality, and scale, of which you can choose any two. A system that has information on many data subjects and to which many people require access is hard to secure unless its functionality is severely restricted. If it has rich functionality, you may have to restrict the number of people with access, or accept that some information will leak.