Instance selection (or dataset reduction, or dataset condensation) is an important data pre-processing step that can be applied in many machine learning (or data mining) tasks. Approaches for instance selection can be applied for reducing the original dataset to a manageable volume, leading to a reduction of the computational resources that are necessary for performing the learning process. Algorithms of instance selection can also be applied for removing noisy instances, before applying learning algorithms. This step can improve the accuracy in classification problems. Algorithm for instance selection should identify a subset of the total available data to achieve the original purpose of the data mining (or machine learning) application as if the whole data had been used. Considering this, the optimal outcome of IS would be the minimum data subset that can accomplish the same task with no performance loss, in comparison with the performance achieved when the task is performed using the whole available data. Therefore, every instance selection strategy should deal with a trade-off between the reduction rate of the dataset and the classification quality. == Instance selection algorithms == The literature provides several different algorithms for instance selection. They can be distinguished from each other according to several different criteria. Considering this, instance selection algorithms can be grouped in two main classes, according to what instances they select: algorithms that preserve the instances at the boundaries of classes and algorithms that preserve the internal instances of the classes. Within the category of algorithms that select instances at the boundaries it is possible to cite DROP3, ICF and LSBo. On the other hand, within the category of algorithms that select internal instances, it is possible to mention ENN and LSSm. In general, algorithm such as ENN and LSSm are used for removing harmful (noisy) instances from the dataset. They do not reduce the data as the algorithms that select border instances, but they remove instances at the boundaries that have a negative impact on the data mining task. They can be used by other instance selection algorithms, as a filtering step. For example, the ENN algorithm is used by DROP3 as the first step, and the LSSm algorithm is used by LSBo. There is also another group of algorithms that adopt different selection criteria. For example, the algorithms LDIS, CDIS and XLDIS select the densest instances in a given arbitrary neighborhood. The selected instances can include both, border and internal instances. The LDIS and CDIS algorithms are very simple and select subsets that are very representative of the original dataset. Besides that, since they search by the representative instances in each class separately, they are faster (in terms of time complexity and effective running time) than other algorithms, such as DROP3 and ICF. Besides that, there is a third category of algorithms that, instead of selecting actual instances of the dataset, select prototypes (that can be synthetic instances). In this category it is possible to include PSSA, PSDSP and PSSP. The three algorithms adopt the notion of spatial partition (a hyperrectangle) for identifying similar instances and extract prototypes for each set of similar instances. In general, these approaches can also be modified for selecting actual instances of the datasets. The algorithm ISDSP adopts a similar approach for selecting actual instances (instead of prototypes).
Neural field
In machine learning, a neural field (also known as implicit neural representation, neural implicit, or coordinate-based neural network), is a mathematical field that is fully or partially parametrized by a neural network. Initially developed to tackle visual computing tasks, such as rendering or reconstruction (e.g., neural radiance fields), neural fields emerged as a promising strategy to deal with a wider range of problems, including surrogate modelling of partial differential equations, such as in physics-informed neural networks. Differently from traditional machine learning algorithms, such as feed-forward neural networks, convolutional neural networks, or transformers, neural fields do not work with discrete data (e.g. sequences, images, tokens), but map continuous inputs (e.g., spatial coordinates, time) to continuous outputs (i.e., scalars, vectors, etc.). This makes neural fields not only discretization independent, but also easily differentiable. Moreover, dealing with continuous data allows for a significant reduction in space complexity, which translates to a much more lightweight network. == Formulation and training == According to the universal approximation theorem, provided adequate learning, sufficient number of hidden units, and the presence of a deterministic relationship between the input and the output, a neural network can approximate any function to any degree of accuracy. Hence, in mathematical terms, given a field y = Φ ( x ) {\textstyle {\boldsymbol {y}}=\Phi ({\boldsymbol {x}})} , with x ∈ R n {\displaystyle {\boldsymbol {x}}\in \mathbb {R} ^{n}} and y ∈ R m {\displaystyle {\boldsymbol {y}}\in \mathbb {R} ^{m}} , a neural field Ψ θ {\displaystyle \Psi _{\theta }} , with parameters θ {\displaystyle {\boldsymbol {\theta }}} , is such that: Ψ θ ( x ) = y ^ ≈ y {\displaystyle \Psi _{\theta }({\boldsymbol {x}})={\hat {\boldsymbol {y}}}\approx {\boldsymbol {y}}} === Training === For supervised tasks, given N {\displaystyle N} examples in the training dataset (i.e., ( x i , y i ) ∈ D t r a i n , i = 1 , … , N {\displaystyle ({\boldsymbol {x_{i}}},{\boldsymbol {y_{i}}})\in {\mathcal {D_{train}}},i=1,\dots ,N} ), the neural field parameters can be learned by minimizing a loss function L {\displaystyle {\mathcal {L}}} (e.g., mean squared error). The parameters θ ~ {\displaystyle {\tilde {\theta }}} that satisfy the optimization problem are found as: θ ~ = argmin θ 1 N ∑ ( x i , y i ) ∈ D t r a i n L ( Ψ θ ( x i ) , y i ) {\displaystyle {\tilde {\boldsymbol {\theta }}}={\underset {\boldsymbol {\theta }}{\text{argmin}}}\;{\frac {1}{N}}\sum _{({\boldsymbol {x_{i}}},{\boldsymbol {y_{i}}})\in {\mathcal {D_{train}}}}{\mathcal {L}}(\Psi _{\theta }({\boldsymbol {x}}_{i}),{\boldsymbol {y}}_{i})} Notably, it is not necessary to know the analytical expression of Φ {\displaystyle \Phi } , for the previously reported training procedure only requires input-output pairs. Indeed, a neural field is able to offer a continuous and differentiable surrogate of the true field, even from purely experimental data. Moreover, neural fields can be used in unsupervised settings, with training objectives that depend on the specific task. For example, physics-informed neural networks may be trained on just the residual. === Spectral bias === As for any artificial neural network, neural fields may be characterized by a spectral bias (i.e., the tendency to preferably learn the low frequency content of a field), possibly leading to a poor representation of the ground truth. In order to overcome this limitation, several strategies have been developed. For example, SIREN uses sinusoidal activations, while the Fourier-features approach embeds the input through sines and cosines. == Conditional neural fields == In many real-world cases, however, learning a single field is not enough. For example, when reconstructing 3D vehicle shapes from Lidar data, it is desirable to have a machine learning model that can work with arbitrary shapes (e.g., a car, a bicycle, a truck, etc.). The solution is to include additional parameters, the latent variables (or latent code) z ∈ R d {\displaystyle {\boldsymbol {z}}\in \mathbb {R} ^{d}} , to vary the field and adapt it to diverse tasks. === Latent code production === When dealing with conditional neural fields, the first design choice is represented by the way in which the latent code is produced. Specifically, two main strategies can be identified: Encoder: the latent code is the output of a second neural network, acting as an encoder. During training, the loss function is the objective used to learn the parameters of both the neural field and the encoder. Auto-decoding: each training example has its own latent code, jointly trained with the neural field parameters. When the model has to process new examples (i.e., not originally present in the training dataset), a small optimization problem is solved, keeping the network parameters fixed and only learning the new latent variables. Since the latter strategy requires additional optimization steps at inference time, it sacrifices speed, but keeps the overall model smaller. Moreover, despite being simpler to implement, an encoder may harm the generalization capabilities of the model. For example, when dealing with a physical scalar field f : R 2 → R {\displaystyle f:\mathbb {R} ^{2}\rightarrow \mathbb {R} } (e.g., the pressure of a 2D fluid), an auto-decoder-based conditional neural field can map a single point to the corresponding value of the field, following a learned latent code z {\displaystyle {\boldsymbol {z}}} . However, if the latent variables were produced by an encoder, it would require access to the entire set of points and corresponding values (e.g. as a regular grid or a mesh graph), leading to a less robust model. === Global and local conditioning === In a neural field with global conditioning, the latent code does not depend on the input and, hence, it offers a global representation (e.g., the overall shape of a vehicle). However, depending on the task, it may be more useful to divide the domain of x {\displaystyle {\boldsymbol {x}}} in several subdomains, and learn different latent codes for each of them (e.g., splitting a large and complex scene in sub-scenes for a more efficient rendering). This is called local conditioning. === Conditioning strategies === There are several strategies to include the conditioning information in the neural field. In the general mathematical framework, conditioning the neural field with the latent variables is equivalent to mapping them to a subset θ ∗ {\displaystyle {\boldsymbol {\theta }}^{}} of the neural field parameters: θ ∗ = Γ ( z ) {\displaystyle {\boldsymbol {\theta }}^{}=\Gamma ({\boldsymbol {z}})} In practice, notable strategies are: Concatenation: the neural field receives, as input, the concatenation of the original input x {\displaystyle {\boldsymbol {x}}} with the latent codes z {\displaystyle {\boldsymbol {z}}} . For feed-forward neural networks, this is equivalent to setting θ ∗ {\displaystyle {\boldsymbol {\theta }}^{}} as the bias of the first layer and Γ ( z ) {\displaystyle \Gamma ({\boldsymbol {z}})} as an affine transformation. Hypernetworks: a hypernetwork is a neural network that outputs the parameters of another neural network. Specifically, it consists of approximating Γ ( z ) {\displaystyle \Gamma ({\boldsymbol {z}})} with a neural network Γ ^ γ ( z ) {\displaystyle {\hat {\Gamma }}_{\gamma }({\boldsymbol {z}})} , where γ {\displaystyle {\boldsymbol {\gamma }}} are the trainable parameters of the hypernetwork. This approach is the most general, as it allows to learn the optimal mapping from latent codes to neural field parameters. However, hypernetworks are associated to larger computational and memory complexity, due to the large number of trainable parameters. Hence, leaner approaches have been developed. For example, in the Feature-wise Linear Modulation (FiLM), the hypernetwork only produces scale and bias coefficients for the neural field layers. === Meta-learning === Instead of relying on the latent code to adapt the neural field to a specific task, it is also possible to exploit gradient-based meta-learning. In this case, the neural field is seen as the specialization of an underlying meta-neural-field, whose parameters are modified to fit the specific task, through a few steps of gradient descent. An extension of this meta-learning framework is the CAVIA algorithm, that splits the trainable parameters in context-specific and shared groups, improving parallelization and interpretability, while reducing meta-overfitting. This strategy is similar to the auto-decoding conditional neural field, but the training procedure is substantially different. == Applications == Thanks to the possibility of efficiently modelling diverse mathematical fields with neural networks, neural fields have been applied to a wide range of problems: 3D scene reconstruction: neural fields can be used to model t
Sarpa (snakebite app)
Sarpa or SARPA (Snake Awareness, Rescue and Protection app) is a snakebite app, an application for mobile devices developed in India to provide rapid, life-saving help for victims of snakebite, which kill an estimated 58,000 people a year in India. The app provides information about snakes, gets fast aid for people bitten, and helps in the development of antivenoms. Similar systems developed in India include SnakeHub, Snake Lens, Snakepedia, Serpent and the Big Four Mapping Project. The apps provide rapid response to snakebite incidents, often in remote areas, using a network of volunteers managed by local wildlife departments; their use can save human lives by providing rapid medical care, and also snakes, by helping to avoid interaction between the species. In 2026, it was announced that the app had plans to offer real-time contact from doctors directly from the app to provide users with decision-making advice.
Mozilla VPN
Mozilla VPN is an open-source virtual private network developed by Mozilla. It launched in beta as Firefox Private Network on September 10, 2019, and officially launched on July 15, 2020, as Mozilla VPN. Mozilla VPN should not be confused with the built-in VPN in Firefox since version 149 released in March 2026, which is free with a monthly data limit of 50 GB but only masks traffic that originates in Firefox unlike Mozilla VPN that protects the entire device. == History == The Firefox Private Network web browser extension beta version was released on September 10, 2019, as part of the relaunch of Mozilla's Test Pilot Program, a program that allowed Firefox users to test experimental new features which had been shuttered in January 2019. The beta of the subscription-based standalone virtual private network for Android, Microsoft Windows, and Chromebook launched on February 19, 2020, with the iOS version following soon after. Firefox Private Network was rebranded as "Mozilla VPN" on June 18, 2020, and officially launched as Mozilla VPN on July 15, 2020. At launch, Mozilla VPN was available in six countries (the United States, Canada, the United Kingdom, Singapore, Malaysia, and New Zealand) for Windows 10, Android, and iOS (beta). Over time, the service also launched in Germany, France, Italy, Spain, Switzerland, Austria, Belgium, Netherlands, Ireland, Finland, Sweden, Poland, Czechia, Hungary, Romania, Bulgaria, Slovakia, Portugal, Denmark, Croatia, Lithuania, Slovenia, Latvia, Luxembourg, Estonia, Cyprus, and Malta. == Audits history == Cybersecurity firm Cure53 conducted a security audit for Mozilla VPN in August 2020 and identified multiple vulnerabilities, including one critical-severity vulnerability. In March 2021, Cure53 conducted a second security audit, which noted significant improvements since the 2020 audit. The second audit identified multiple issues, including two medium-severity and one high-severity vulnerability, but concluded that by the time of publication, only one vulnerability remained unresolved, and that it would require "a strong state-funded attacker-model" to be exploitable. Mozilla disclosed most of the vulnerabilities in July 2021 and released the full report by Cure53 in August 2021. In April 2023, Cure53 conducted a third security audit, the results of which Mozilla disclosed in December that year, along with the full report by Cure53. == Features == Mozilla VPN masks the user's IP address, hiding the user's location data from the websites accessed by the user, and encrypts all network activity. The service allows for up to 5 simultaneous connections, to any of more than 500 servers in 30+ countries, and is available on the mobile operating systems iOS and Android and the desktop operating systems Microsoft Windows, macOS and Linux. Mozilla VPN's infrastructure is provided by the Swedish Mullvad VPN service, which uses the WireGuard VPN protocol. The VPN software comes with additional features, like recommended server locations, the ability to block ads, block ad trackers and malware, the ability to exclude certain applications from protection, the ability to set multi-hop connections, and to set custom DNS servers. When used with Firefox and the official extension, Mozilla VPN allows the use of different settings per container as well as bypassing the VPN for specific websites.
Cybersecurity in space
Cybersecurity in space involves the defense of all space assets (e.g. navigation systems, satellites, ground antennas, networks, etc.). The security of space can be affected by attacks such as disruption, corruption as well as the destruction of depended-upon assets/collected data. Government (e.g. militaries) and non-government sectors (e.g. financial industries) have started to become more reliant on numerous space-based services. Due to the criticality of these services, space security experts have identified these assets as high-value targets (HVT) that can cause detrimental consequences to all of Earth. == Scope and definitions == Space assets are broken down by three sub-sectors: the space component, the ground component, and the individual user component. The architecture of space assets is extremely complex and allows for a frequent attack vector utilized, the disruption by radio frequency (RF) cyber-attacks. In 2020, a memorandum was published by President Donald Trump, Space Policy Directive‑5 (SPD‑5). It established principles to ensure the safeguarding of all space assets. In 2023, the National Institute of Standards and Technology’s (NIST) published IR 8270, Introduction to Cybersecurity for Commercial Satellite Operations. This report established a baseline risk-management framework (RMF) to be implemented into space operations. == History == During the Cold War in the 1950s-1960s, the United States and Russia entered what was called the “Space Race”. By 1957, the Soviet Union successfully launched the first satellite into space named Sputnik. By 1961, the first key milestone was accomplished when the Soviet Union’s Yuri Gagarin became the first human to orbit Earth. This was later followed by the first American, Alan Shepard, to be launched into space; this was followed by John Glenn becoming the first American to orbit Earth in 1962. In 1969, a pinnacle milestone was reached when Apollo 11 launched into space and Neil Armstrong became the first man to walk on the moon. As space operations furthered, Commercial off-the-shelf products became increasingly popular but resulted in a rapid increase to the cyber-attack surface. Public awareness of space security did not increase until 2022, when the Viasat KA-SAT incident occurred, resulting in the disruption of a large number of modems across Europe. The attack was later accredited to Russia by the U.S. and the U.K. Policy and standards started to rapidly increase by 2020. The establishment of SPD-5 was released in 2020 followed by asset hardening instructions in 2022, and NIST’s IR 8270 in 2023. It was not until 2025 that Europe published their own findings in the Space Threat Landscape 2025 Report. This document led to the EU’s security proposals and standards. == Threats == === Radio-frequency Interference and Global Navigation Satellite Systems (GNSS) Spoofing === Space services are highly dependent on RF links for systems such as GNSS, however, a consequence of this dependency on RF is denial of service and deception. In 2017, the Black Sea maritime event occurred when numerous ships were subject to spoofing. Space services depend on RF links susceptible to jamming (denial) and spoofing (deception), including for GNSS/Positioning, Navigation, and Timing (PNT). Annotated incidents include the 2017 Black Sea maritime spoofing event affecting numerous ships, and extensive aviation GNSS spoofing patterns surveyed in various regions during 2024–2025. === Network intrusion and malware === Cyber threats can intrude and infect assets with malware. They do this by finding misconfiguration vulnerabilities, remote-management interfaces, and/or supply-chain vulnerabilities mainly in ground networks and user terminals. When KA-SAT occurred, it resulted from bulk modem disturbances. Forensic analysts later suggested malicious management controls and wiper malware as the root cause. === Supply-chain and lifecycle risks === The outsource of COTS components, external vendors, and software defined payloads allowed for vulnerabilities to emerge in the System/Product Lifecycle. In response, EU recommended the implementation of lifecycle-wide controls as mitigating factors. === Espionage, disruption, and influence === As Advanced Persistent Threats (APTs), Global Positioning System (GPS) intervention, and information warfare increased, assets like transponders became more frequent targets of attack. == Noteworthy incidents == The Viasat KA‑SAT incident of 2022, where a large number of modems in Europe were disrupted, resulted in the loss of telemetry access to a significant amount of wind turbines in Germany. The mass GNSS deception of the Black Sea in 2017 affected numerous ships when they started to convey fake central locations in Russia. Between 2024 and 2025, there was a mass, repetitive aviation GNSS spoofing that affected the aircraft of various regions. == Standards, guidelines, and best practices == SPD‑5 (U.S.) – This established risk-based engineering, verifying and ensuring positive control, and the implementation of risk mitigation controls. NIST IR 8270 – This created a RMF for COTS satellites. CISA/FBI SATCOM Advisory (AA22‑076) – Provided guidance on hardening techniques such as least-privileged, access control, encryption, etc.). ENISA Space Threat Landscape 2025 – It established the categorization of assets to organize threats, ensuring the observation of system/product lifecycle, and an RMF for COTS satellites. ECSS‑E‑ST‑80C (2024) – This established a standard for securing lifecycles in space, covering all segments (e.g. ground, launch, etc.). == Regulation and governance == As of 2025, there is no international regulations established for space assets, but the U.S., EU, and ESA institutional initiatives have published standards to address security concerns. The U.S. implemented SPD-5 and the Federal Communications Commission (FCC); the FCC addressed orbital debris. While the EU created standards to address technological mandates and support the implementation of NIS2. Lastly, the ESA created a special operations center to safeguard their satellites. International governance is still evolving, but forums have been held by the United Nations Committee on the Peaceful Uses of Outer Space. International conversations under forums such as the UN Committee on the Peaceful Uses of Outer Space (COPUOS) progressively note the cyber–space safety relationship, though formal global norms specific to space cybersecurity continue evolving. == Risk management approaches == Through RMF, mitigation controls have been implemented to reduce the risk of exploitation while increasing the security of space. Controls addressing mitigation include proper configuration, system hardening, zero-trust architectures, encryption, etc. Both the government and industries have placed an emphasis on incident response procedures to identify, contain, and remediate breaches.
Software engineering professionalism
Software engineering professionalism is a movement to make software engineering a profession, with aspects such as degree and certification programs, professional associations, professional ethics, and government licensing. The field is a licensed discipline in Texas in the United States (Texas Board of Professional Engineers, since 2013), Engineers Australia(Course Accreditation since 2001, not Licensing), and many provinces in Canada. == History == In 1993 the IEEE and ACM began a joint effort called JCESEP, which evolved into SWECC in 1998 to explore making software engineering into a profession. The ACM pulled out of SWECC in May 1999, objecting to its support for the Texas professionalization efforts, of having state licenses for software engineers. ACM determined that the state of knowledge and practice in software engineering was too immature to warrant licensing, and that licensing would give false assurances of competence even if the body of knowledge were mature. The IEEE continued to support making software engineering a branch of traditional engineering. In Canada the Canadian Information Processing Society established the Information Systems Professional certification process. Also, by the late 1990s (1999 in British Columbia) the discipline of software engineering as a professional engineering discipline was officially created. This has caused some disputes between the provincial engineering associations and companies who call their developers software engineers, even though these developers have not been licensed by any engineering association. In 1999, the Panel of Software Engineering was formed as part of the settlement between Engineering Canada and the Memorial University of Newfoundland over the school's use of the term "software engineering" in the name of a computer science program. Concerns were raised over the inappropriate use of the name "software engineering" to describe non-engineering programs could lead to student and public confusion, and ultimately threaten public safety. The Panel issued recommendations to create a Software Engineering Accreditation Board, but the task force created to carry out the recommendations was unable to get the various stakeholders to agree to concrete proposals, resulting in separate accreditation boards. == Ethics == Software engineering ethics is a large field. In some ways it began as an unrealistic attempt to define bugs as unethical. More recently it has been defined as the application of both computer science and engineering philosophy, principles, and practices to the design and development of software systems. Due to this engineering focus and the increased use of software in mission critical and human critical systems, where failure can result in large losses of capital but more importantly lives such as the Therac-25 system, many ethical codes have been developed by a number of societies, associations and organizations. These entities, such as the ACM, IEEE, EGBC and Institute for Certification of Computing Professionals (ICCP) have formal codes of ethics. Adherence to the code of ethics is required as a condition of membership or certification. According to the ICCP, violation of the code can result in revocation of the certificate. Also, all engineering societies require conformance to their ethical codes; violation of the code results in the revocation of the license to practice engineering in the society's jurisdiction. These codes of ethics usually have much in common. They typically relate the need to act consistently with the client's interest, employer's interest, and most importantly the public's interest. They also outline the need to act with professionalism and to promote an ethical approach to the profession. A Software Engineering Code of Ethics has been approved by the ACM and the IEEE-CS as the standard for teaching and practicing software engineering. === Examples of codes of conduct === The following are examples of codes of conduct for Professional Engineers. These 2 have been chosen because both jurisdictions have a designation for Professional Software Engineers. Engineers and Geoscientists of British Columbia (EGBC): All members in the association's code of Ethics must ensure that the government, the public can rely on BC's professional engineers and Geoscientists to act at all times with fairness, courtesy and good faith to their employers, employee and customers, and to uphold the truth, honesty and trustworthiness, and to safe guard human life and the environment. This is just one of the many ways in which BC's Professional Engineers and Professional Geoscientists maintain their competitive edge in today's global marketplace. Association of Professional Engineers and Geoscientists of Alberta (APEGA): Different with British Columbia, the Alberta Government granted self governance to engineers, Geoscientists and geophysicists. All members in the APEGA have to accept legal and ethical responsibility for the work and to hold the interest of the public and society. The APEGA is a standards guideline of professional practice to uphold the protection of public interest for engineering, Geoscientists and geophysics in Alberta. === Opinions on ethics === Bill Joy argued that "better software" can only enable its privileged end users, make reality more power-pointy as opposed to more humane, and ultimately run away with itself so that "the future doesn't need us." He openly questioned the goals of software engineering in this respect, asking why it isn't trying to be more ethical rather than more efficient. In his book Code and Other Laws of Cyberspace, Lawrence Lessig argues that computer code can regulate conduct in much the same way as the legal code. Lessig and Joy urge people to think about the consequences of the software being developed, not only in a functional way, but also in how it affects the public and society as a whole. Overall, due to the youth of software engineering, many of the ethical codes and values have been borrowed from other fields, such as mechanical and civil engineering. However, there are many ethical questions that even these, much older, disciplines have not encountered. Questions about the ethical impact of internet applications, which have a global reach, have never been encountered until recently and other ethical questions are still to be encountered. This means the ethical codes for software engineering are a work in progress, that will change and update as more questions arise. == Independent licensing and certification exams == Since 2002, the IEEE Computer Society offered the Certified Software Development Professional (CSDP) certification exam (in 2015 this was replaced by several similar certifications). A group of experts from industry and academia developed the exam and maintained it. Donald Bagert, and at a later period Stephen Tockey headed the certification committee. Contents of the exam centered around the SWEBOK (Software Engineering Body of Knowledge) guide, with an additional emphasis on Professional Practices and Software Engineering Economics knowledge areas (KAs). The motivation was to produce a structure at an international level for software engineering's knowledge areas. == Criticism of licensing == Professional licensing has been criticized for many reasons. The field of software engineering is too immature Licensing would give false assurances of competence even if the body of knowledge were mature Software engineers would have to study years of calculus, physics, and chemistry to pass the exams, which is irrelevant to most software practitioners. Many (most?) computer science majors don't earn degrees in engineering schools, so they are probably unqualified to pass engineering exams. == Licensing by country == === United States === The Bureau of Labor Statistics (BLS) classifies computer software engineers as a subcategory of "computer specialists", along with occupations such as computer scientist, Programmer, Database administrator and Network administrator. The BLS classifies all other engineering disciplines, including computer hardware engineers, as engineers. Many states prohibit unlicensed persons from calling themselves an Engineer, or from indicating branches or specialties not covered licensing acts. In many states, the title Engineer is reserved for individuals with a Professional Engineering license indicating that they have shown minimum level of competency through accredited engineering education, qualified engineering experience, and engineering board's examinations. In April 2013 the National Council of Examiners for Engineering and Surveying (NCEES) began offering a Professional Engineer (PE) exam for Software Engineering. The exam was developed in association with the IEEE Computer Society. NCEES ended the exam in April 2019 due to lack of participation. The American National Society of Professional Engineers provides a model law and lobbies legislatures to adopt occ
Kuaishou
Kuaishou Technology is a Chinese publicly traded partly state-owned holding company based in Haidian District, Beijing, that was founded in 2011 by Hua Su (Chinese: 宿华) and Cheng Yixiao (Chinese: 程一笑). The company, listed on the Hong Kong Stock Exchange, is known for developing a mobile app for sharing users' short videos, a social network, and video special effects editor. The app is known as Kwai in many countries outside of China. It is also known as Snack Video in India, Pakistan and Indonesia. == Ownership and governance == Kuaishou's overseas team is led by the former CEO of the application 99, and staff from Google, Facebook, Netflix, and TikTok were recruited to lead the company's international expansion. The China Internet Investment Fund, a state-owned enterprise controlled by the Cyberspace Administration of China, holds a golden share ownership stake in Kuaishou. == History == Kuaishou is China's first short video platform that was developed in 2011 by engineer Hua Su and Cheng Yixiao. Prior to co-founding Kuaishou, Su Hua had worked for both Google and Baidu as a software engineer. The company is headquartered in Haidian District, Beijing. Kuaishou's predecessor "GIF Kuaishou" was founded in March 2011. GIF Kuaishou was a mobile app with which users could make and share GIF pictures. In 2013, Kuaishou became a short-video social platform. By 2013, the app had reached 100 million daily users. By 2019, it had exceeded 200 million active daily users. In March 2017, Kuaishou closed a US$350 million investment round that was led by Tencent. In January 2018, Forbes estimated the company's valuation to be US$18 billion. In April 2018, Kuaishou's app was briefly banned from Chinese app stores after China Central Television (CCTV) reported on the platform popularizing videos of teenage mothers. In 2019, the company announced a partnership with the People's Daily, an official newspaper of the Central Committee of the Chinese Communist Party, to help it experiment with the use of artificial intelligence in news. In June 2020, following the start of the 2020–2021 China–India skirmishes, the Government of India banned Kwai along with 58 other apps, citing "data and privacy issues". In January 2021, Kuaishou announced it was planning an initial public offering (IPO) to raise approximately US$5 billion. Kuaishou's stock completed its first day of trading at $300 Hong Kong dollars (HKD) (US$38.70), more than doubling its initial offer price, and causing its market value to rise to over $1 trillion HKD (US$159 billion). In February 2021, Kuaishou made a debut on the Hong Kong Stock Exchange, with its shares soaring by 194% at the opening. The company subsequently encountered major setbacks as a result of heightened regulatory restrictions on Chinese internet firms, which contributed to its share price falling by nearly 80% from its post-IPO peak. By December 2021, Kuaishou announced a major reorganization, including the layoff of 30% of its staff, primarily targeting mid-level employees earning an annual salary of $157,000 or more. This restructuring aimed to cut costs and mitigate financial losses. In October 2022, state-owned Beijing Radio and Television Station took a minority ownership stake in Kuaishou. In April 2024, a Financial Times article citing current and former Kuaishou employees stated that the company has been running an ageist redundancy programme known internally as "Limestone", culling workers in their mid-30s. In June 2024, Kuaishou and the Sichuan international communication center launched a branch center in São Paulo, Brazil. In June 2024, Kuaishou released its diffusion transformer text-to-video model, Kling, which they claimed could generate two minutes of video at 30 frames per second and in 1080p resolution. The model has been compared to that of OpenAI's Sora text-to-video model. It is accessible to the public on Kuaishou's video editing app KwaiCut via signing up for a waitlist with a Chinese phone number. In December 2025, Kuaishou came under a cyberattack which led to a temporary influx of violent and pornographic content. == Popularity == As of 2019, it had a worldwide user base of over 200 million, leading the "Most Downloaded" lists of the Google Play and Apple App Store in eight countries, such as Brazil, where it was introduced in 2019. Its main short-video platform competitor was Douyin, which is known as TikTok outside China. Compared to Douyin, Kuaishou is more popular with older users living outside China's Tier 1 cities. Its initial popularity came from videos of Chinese rural life. The app is particularly well known for its "rustic" aesthetic and is popular among rural people. Kuaishou also relied more on e-commerce revenue than on advertising revenue compared to its main competitor. == Reception == Kwai (as the app is called outside of China) was banned in India in 2020 along with other short video apps like TikTok. Kuaishou then released the clone SnackVideo, which was subsequently also banned. The app is one of the most popular social media platforms in Brazil, where Kuaishou partnered with creators to make telenovela style content, and appeals to football fans by working with football teams CR Flamengo and Santos FC and sponsoring the tournament Copa América. Kwai was notable in Brazil for spreading information (and misinformation) about the COVID-19 vaccine and political misinformation. === Manjiao Wenhua === "Manjiao wenhua" (慢脚文化) is a sarcasm term on Chinese internet on the unethical or illegal contents on Kuaishou. State broadcaster China Central Television (CCTV) reported that many contents are about child pregnancy. "Dating, pregnancy, bearing a child...these are strictly prohibited in the real time by a minor, but these contents can easily shown to audiences here." In addition, many students from primary or secondary schools make a pose of smoking. Wang Zhenhui (王贞会) from CUPSL stated that these kinds of bad values will give negative effects to the minors.