An adaptive neuro-fuzzy inference system or adaptive network-based fuzzy inference system (ANFIS) is a kind of artificial neural network that is based on Takagi–Sugeno fuzzy inference system, a class of fuzzy models introduced by Tomohiro Takagi and Michio Sugeno for system identification and control. The technique was developed in the early 1990s. Since it integrates both neural networks and fuzzy logic principles, it has potential to capture the benefits of both in a single framework. Its inference system corresponds to a set of fuzzy IF–THEN rules that have learning capability to approximate nonlinear functions. Hence, ANFIS is considered to be a universal estimator. For using the ANFIS in a more efficient and optimal way, one can use the best parameters obtained by genetic algorithm. It has uses in intelligent situational aware energy management system. == ANFIS architecture == It is possible to identify two parts in the network structure, namely premise and consequence parts. In more details, the architecture is composed by five layers. The first layer takes the input values and determines the membership functions belonging to them. It is commonly called fuzzification layer. The membership degrees of each function are computed by using the premise parameter set, namely {a,b,c}. The second layer is responsible of generating the firing strengths for the rules. Due to its task, the second layer is denoted as "rule layer". The role of the third layer is to normalize the computed firing strengths, by dividing each value for the total firing strength. The fourth layer takes as input the normalized values and the consequence parameter set {p,q,r}. The values returned by this layer are the defuzzificated ones and those values are passed to the last layer to return the final output. === Fuzzification layer === The first layer of an ANFIS network describes the difference to a vanilla neural network. Neural networks in general are operating with a data pre-processing step, in which the features are converted into normalized values between 0 and 1. An ANFIS neural network doesn't need a sigmoid function, but it's doing the preprocessing step by converting numeric values into fuzzy values. Here is an example: Suppose, the network gets as input the distance between two points in the 2d space. The distance is measured in pixels and it can have values from 0 up to 500 pixels. Converting the numerical values into fuzzy numbers is done with the membership function which consists of semantic descriptions like near, middle and far. Each possible linguistic value is given by an individual neuron. The neuron “near” fires with a value from 0 until 1, if the distance is located within the category "near". While the neuron “middle” fires, if the distance in that category. The input value “distance in pixels” is split into three different neurons for near, middle and far.
Fatsecret
Fatsecret, commonly styled as fatsecret, is a mobile application, website and API that helps people achieve their weight loss goals and find accurate nutrition information. It also offers a weight loss clinic with coaching and medically supported programs. The platform powers global health apps. == History == Fatsecret was founded in 2006 in Melbourne, Australia by Lenny Moses and Rodney Moses. As of 2019, Lenny serves as the company's CEO. The company is known for its calorie counting and meal tracking app, and by April 2016, the company claimed to have 45 million users of its services. In August 2018, a premium version of its app was released. Since August 2009, the company has operated the Fatsecret Platform API, which allows access to its global food and nutrition database. Fatsecret reportedly had 900,000 downloads of its app in January 2020. In an analysis of several Health & Fitness app subcategories for the United States in January 2021, Fatsecret was reported to have the highest 30 day user retention rate of top Calorie Counter + Meal Planner for Weight Loss apps.
Blockmodeling
Blockmodeling is a set or a coherent framework, that is used for analyzing social structure and also for setting procedure(s) for partitioning (clustering) social network's units (nodes, vertices, actors), based on specific patterns, which form a distinctive structure through interconnectivity. It is primarily used in statistics, machine learning and network science. As an empirical procedure, blockmodeling assumes that all the units in a specific network can be grouped together to such extent to which they are equivalent. Regarding equivalency, it can be structural, regular or generalized. Using blockmodeling, a network can be analyzed using newly created blockmodels, which transforms large and complex network into a smaller and more comprehensible one. At the same time, the blockmodeling is used to operationalize social roles. While some contend that the blockmodeling is just clustering methods, Bonacich and McConaghy state that "it is a theoretically grounded and algebraic approach to the analysis of the structure of relations". Blockmodeling's unique ability lies in the fact that it considers the structure not just as a set of direct relations, but also takes into account all other possible compound relations that are based on the direct ones. The principles of blockmodeling were first introduced by Francois Lorrain and Harrison C. White in 1971. Blockmodeling is considered as "an important set of network analytic tools" as it deals with delineation of role structures (the well-defined places in social structures, also known as positions) and the discerning the fundamental structure of social networks. According to Batagelj, the primary "goal of blockmodeling is to reduce a large, potentially incoherent network to a smaller comprehensible structure that can be interpreted more readily". Blockmodeling was at first used for analysis in sociometry and psychometrics, but has now spread also to other sciences. == Definition == A network as a system is composed of (or defined by) two different sets: one set of units (nodes, vertices, actors) and one set of links between the units. Using both sets, it is possible to create a graph, describing the structure of the network. During blockmodeling, the researcher is faced with two problems: how to partition the units (e.g., how to determine the clusters (or classes), that then form vertices in a blockmodel) and then how to determine the links in the blockmodel (and at the same time the values of these links). In the social sciences, the networks are usually social networks, composed of several individuals (units) and selected social relationships among them (links). Real-world networks can be large and complex; blockmodeling is used to simplify them into smaller structures that can be easier to interpret. Specifically, blockmodeling partitions the units into clusters and then determines the ties among the clusters. At the same time, blockmodeling can be used to explain the social roles existing in the network, as it is assumed that the created cluster of units mimics (or is closely associated with) the units' social roles. Blockmodeling can thus be defined as a set of approaches for partitioning units into clusters (also known as positions) and links into blocks, which are further defined by the newly obtained clusters. A block (also blockmodel) is defined as a submatrix, that shows interconnectivity (links) between nodes, present in the same or different clusters. Each of these positions in the cluster is defined by a set of (in)direct ties to and from other social positions. These links (connections) can be directed or undirected; there can be multiple links between the same pair of objects or they can have weights on them. If there are not any multiple links in a network, it is called a simple network. A matrix representation of a graph is composed of ordered units, in rows and columns, based on their names. The ordered units with similar patterns of links are partitioned together in the same clusters. Clusters are then arranged together so that units from the same clusters are placed next to each other, thus preserving interconnectivity. In the next step, the units (from the same clusters) are transformed into a blockmodel. With this, several blockmodels are usually formed, one being core cluster and others being cohesive; a core cluster is always connected to cohesive ones, while cohesive ones cannot be linked together. Clustering of nodes is based on the equivalence, such as structural and regular. The primary objective of the matrix form is to visually present relations between the persons included in the cluster. These ties are coded dichotomously (as present or absent), and the rows in the matrix form indicate the source of the ties, while the columns represent the destination of the ties. Equivalence can have two basic approaches: the equivalent units have the same connection pattern to the same neighbors or these units have same or similar connection pattern to different neighbors. If the units are connected to the rest of network in identical ways, then they are structurally equivalent. Units can also be regularly equivalent, when they are equivalently connected to equivalent others. With blockmodeling, it is necessary to consider the issue of results being affected by measurement errors in the initial stage of acquiring the data. == Different approaches == Regarding what kind of network is undergoing blockmodeling, a different approach is necessary. Networks can be one–mode or two–mode. In the former all units can be connected to any other unit and where units are of the same type, while in the latter the units are connected only to the unit(s) of a different type. Regarding relationships between units, they can be single–relational or multi–relational networks. Further more, the networks can be temporal or multilevel and also binary (only 0 and 1) or signed (allowing negative ties)/values (other values are possible) networks. Different approaches to blockmodeling can be grouped into two main classes: deterministic blockmodeling and stochastic blockmodeling approaches. Deterministic blockmodeling is then further divided into direct and indirect blockmodeling approaches. Among direct blockmodeling approaches are: structural equivalence and regular equivalence. Structural equivalence is a state, when units are connected to the rest of the network in an identical way(s), while regular equivalence occurs when units are equally related to equivalent others (units are not necessarily sharing neighbors, but have neighbour that are themselves similar). Indirect blockmodeling approaches, where partitioning is dealt with as a traditional cluster analysis problem (measuring (dis)similarity results in a (dis)similarity matrix), are: conventional blockmodeling, generalized blockmodeling: generalized blockmodeling of binary networks, generalized blockmodeling of valued networks and generalized homogeneity blockmodeling, prespecified blockmodeling. According to Brusco and Steinley (2011), the blockmodeling can be categorized (using a number of dimensions): deterministic or stochastic blockmodeling, one–mode or two–mode networks, signed or unsigned networks, exploratory or confirmatory blockmodeling. == Blockmodels == Blockmodels (sometimes also block models) are structures in which: vertices (e.g., units, nodes) are assembled within a cluster, with each cluster identified as a vertex; from such vertices a graph can be constructed; combinations of all the links (ties), represented in a block as a single link between positions, while at the same time constructing one tie for each block. In a case, when there are no ties in a block, there will be no ties between the two positions that define the block. Computer programs can partition the social network according to pre-set conditions. When empirical blocks can be reasonably approximated in terms of ideal blocks, such blockmodels can be reduced to a blockimage, which is a representation of the original network, capturing its underlying 'functional anatomy'. Thus, blockmodels can "permit the data to characterize their own structure", and at the same time not seek to manifest a preconceived structure imposed by the researcher. Blockmodels can be created indirectly or directly, based on the construction of the criterion function. Indirect construction refers to a function, based on "compatible (dis)similarity measure between paris of units", while the direct construction is "a function measuring the fit of real blocks induced by a given clustering to the corresponding ideal blocks with perfect relations within each cluster and between clusters according to the considered types of connections (equivalence)". === Types === Blockmodels can be specified regarding the intuition, substance or the insight into the nature of the studied network; this can result in such models as follows: parent-child role systems, organizational hierarchies, systems of
Multiple discriminant analysis
Multiple Discriminant Analysis (MDA) is a multivariate dimensionality reduction technique. It has been used to predict signals as diverse as neural memory traces and corporate failure. MDA is not directly used to perform classification. It merely supports classification by yielding a compressed signal amenable to classification. The method described in Duda et al. (2001) §3.8.3 projects the multivariate signal down to an M−1 dimensional space where M is the number of categories. MDA is useful because most classifiers are strongly affected by the curse of dimensionality. In other words, when signals are represented in very-high-dimensional spaces, the classifier's performance is catastrophically impaired by the overfitting problem. This problem is reduced by compressing the signal down to a lower-dimensional space as MDA does. MDA has been used to reveal neural codes.
Radial basis function network
In the field of mathematical modeling, a radial basis function network is an artificial neural network that uses radial basis functions as activation functions. The output of the network is a linear combination of radial basis functions of the inputs and neuron parameters. Radial basis function networks have many uses, including function approximation, time series prediction, classification, and system control. They were first formulated in a 1988 paper by Broomhead and Lowe, both researchers at the Royal Signals and Radar Establishment. == Network architecture == Radial basis function (RBF) networks typically have three layers: an input layer, a hidden layer with a non-linear RBF activation function and a linear output layer. The input can be modeled as a vector of real numbers x ∈ R n {\displaystyle \mathbf {x} \in \mathbb {R} ^{n}} . The output of the network is then a scalar function of the input vector, φ : R n → R {\displaystyle \varphi :\mathbb {R} ^{n}\to \mathbb {R} } , and is given by φ ( x ) = ∑ i = 1 N a i ρ ( | | x − c i | | ) {\displaystyle \varphi (\mathbf {x} )=\sum _{i=1}^{N}a_{i}\rho (||\mathbf {x} -\mathbf {c} _{i}||)} where N {\displaystyle N} is the number of neurons in the hidden layer, c i {\displaystyle \mathbf {c} _{i}} is the center vector for neuron i {\displaystyle i} , and a i {\displaystyle a_{i}} is the weight of neuron i {\displaystyle i} in the linear output neuron. Functions that depend only on the distance from a center vector are radially symmetric about that vector, hence the name radial basis function. In the basic form, all inputs are connected to each hidden neuron. The norm is typically taken to be the Euclidean distance (although the Mahalanobis distance appears to perform better with pattern recognition) and the radial basis function is commonly taken to be Gaussian ρ ( ‖ x − c i ‖ ) = exp [ − β i ‖ x − c i ‖ 2 ] {\displaystyle \rho {\big (}\left\Vert \mathbf {x} -\mathbf {c} _{i}\right\Vert {\big )}=\exp \left[-\beta _{i}\left\Vert \mathbf {x} -\mathbf {c} _{i}\right\Vert ^{2}\right]} . The Gaussian basis functions are local to the center vector in the sense that lim | | x | | → ∞ ρ ( ‖ x − c i ‖ ) = 0 {\displaystyle \lim _{||x||\to \infty }\rho (\left\Vert \mathbf {x} -\mathbf {c} _{i}\right\Vert )=0} i.e. changing parameters of one neuron has only a small effect for input values that are far away from the center of that neuron. Given certain mild conditions on the shape of the activation function, RBF networks are universal approximators on a compact subset of R n {\displaystyle \mathbb {R} ^{n}} . This means that an RBF network with enough hidden neurons can approximate any continuous function on a closed, bounded set with arbitrary precision. The parameters a i {\displaystyle a_{i}} , c i {\displaystyle \mathbf {c} _{i}} , and β i {\displaystyle \beta _{i}} are determined in a manner that optimizes the fit between φ {\displaystyle \varphi } and the data. === Normalization === ==== Normalized architecture ==== In addition to the above unnormalized architecture, RBF networks can be normalized. In this case the mapping is φ ( x ) = d e f ∑ i = 1 N a i ρ ( ‖ x − c i ‖ ) ∑ i = 1 N ρ ( ‖ x − c i ‖ ) = ∑ i = 1 N a i u ( ‖ x − c i ‖ ) {\displaystyle \varphi (\mathbf {x} )\ {\stackrel {\mathrm {def} }{=}}\ {\frac {\sum _{i=1}^{N}a_{i}\rho {\big (}\left\Vert \mathbf {x} -\mathbf {c} _{i}\right\Vert {\big )}}{\sum _{i=1}^{N}\rho {\big (}\left\Vert \mathbf {x} -\mathbf {c} _{i}\right\Vert {\big )}}}=\sum _{i=1}^{N}a_{i}u{\big (}\left\Vert \mathbf {x} -\mathbf {c} _{i}\right\Vert {\big )}} where u ( ‖ x − c i ‖ ) = d e f ρ ( ‖ x − c i ‖ ) ∑ j = 1 N ρ ( ‖ x − c j ‖ ) {\displaystyle u{\big (}\left\Vert \mathbf {x} -\mathbf {c} _{i}\right\Vert {\big )}\ {\stackrel {\mathrm {def} }{=}}\ {\frac {\rho {\big (}\left\Vert \mathbf {x} -\mathbf {c} _{i}\right\Vert {\big )}}{\sum _{j=1}^{N}\rho {\big (}\left\Vert \mathbf {x} -\mathbf {c} _{j}\right\Vert {\big )}}}} is known as a normalized radial basis function. ==== Theoretical motivation for normalization ==== There is theoretical justification for this architecture in the case of stochastic data flow. Assume a stochastic kernel approximation for the joint probability density P ( x ∧ y ) = 1 N ∑ i = 1 N ρ ( ‖ x − c i ‖ ) σ ( | y − e i | ) {\displaystyle P\left(\mathbf {x} \land y\right)={1 \over N}\sum _{i=1}^{N}\,\rho {\big (}\left\Vert \mathbf {x} -\mathbf {c} _{i}\right\Vert {\big )}\,\sigma {\big (}\left\vert y-e_{i}\right\vert {\big )}} where the weights c i {\displaystyle \mathbf {c} _{i}} and e i {\displaystyle e_{i}} are exemplars from the data and we require the kernels to be normalized ∫ ρ ( ‖ x − c i ‖ ) d n x = 1 {\displaystyle \int \rho {\big (}\left\Vert \mathbf {x} -\mathbf {c} _{i}\right\Vert {\big )}\,d^{n}\mathbf {x} =1} and ∫ σ ( | y − e i | ) d y = 1 {\displaystyle \int \sigma {\big (}\left\vert y-e_{i}\right\vert {\big )}\,dy=1} . The probability densities in the input and output spaces are P ( x ) = ∫ P ( x ∧ y ) d y = 1 N ∑ i = 1 N ρ ( ‖ x − c i ‖ ) {\displaystyle P\left(\mathbf {x} \right)=\int P\left(\mathbf {x} \land y\right)\,dy={1 \over N}\sum _{i=1}^{N}\,\rho {\big (}\left\Vert \mathbf {x} -\mathbf {c} _{i}\right\Vert {\big )}} and The expectation of y given an input x {\displaystyle \mathbf {x} } is φ ( x ) = d e f E ( y ∣ x ) = ∫ y P ( y ∣ x ) d y {\displaystyle \varphi \left(\mathbf {x} \right)\ {\stackrel {\mathrm {def} }{=}}\ E\left(y\mid \mathbf {x} \right)=\int y\,P\left(y\mid \mathbf {x} \right)dy} where P ( y ∣ x ) {\displaystyle P\left(y\mid \mathbf {x} \right)} is the conditional probability of y given x {\displaystyle \mathbf {x} } . The conditional probability is related to the joint probability through Bayes' theorem P ( y ∣ x ) = P ( x ∧ y ) P ( x ) {\displaystyle P\left(y\mid \mathbf {x} \right)={\frac {P\left(\mathbf {x} \land y\right)}{P\left(\mathbf {x} \right)}}} which yields φ ( x ) = ∫ y P ( x ∧ y ) P ( x ) d y {\displaystyle \varphi \left(\mathbf {x} \right)=\int y\,{\frac {P\left(\mathbf {x} \land y\right)}{P\left(\mathbf {x} \right)}}\,dy} . This becomes φ ( x ) = ∑ i = 1 N e i ρ ( ‖ x − c i ‖ ) ∑ i = 1 N ρ ( ‖ x − c i ‖ ) = ∑ i = 1 N e i u ( ‖ x − c i ‖ ) {\displaystyle \varphi \left(\mathbf {x} \right)={\frac {\sum _{i=1}^{N}e_{i}\rho {\big (}\left\Vert \mathbf {x} -\mathbf {c} _{i}\right\Vert {\big )}}{\sum _{i=1}^{N}\rho {\big (}\left\Vert \mathbf {x} -\mathbf {c} _{i}\right\Vert {\big )}}}=\sum _{i=1}^{N}e_{i}u{\big (}\left\Vert \mathbf {x} -\mathbf {c} _{i}\right\Vert {\big )}} when the integrations are performed. === Local linear models === It is sometimes convenient to expand the architecture to include local linear models. In that case the architectures become, to first order, φ ( x ) = ∑ i = 1 N ( a i + b i ⋅ ( x − c i ) ) ρ ( ‖ x − c i ‖ ) {\displaystyle \varphi \left(\mathbf {x} \right)=\sum _{i=1}^{N}\left(a_{i}+\mathbf {b} _{i}\cdot \left(\mathbf {x} -\mathbf {c} _{i}\right)\right)\rho {\big (}\left\Vert \mathbf {x} -\mathbf {c} _{i}\right\Vert {\big )}} and φ ( x ) = ∑ i = 1 N ( a i + b i ⋅ ( x − c i ) ) u ( ‖ x − c i ‖ ) {\displaystyle \varphi \left(\mathbf {x} \right)=\sum _{i=1}^{N}\left(a_{i}+\mathbf {b} _{i}\cdot \left(\mathbf {x} -\mathbf {c} _{i}\right)\right)u{\big (}\left\Vert \mathbf {x} -\mathbf {c} _{i}\right\Vert {\big )}} in the unnormalized and normalized cases, respectively. Here b i {\displaystyle \mathbf {b} _{i}} are weights to be determined. Higher order linear terms are also possible. This result can be written φ ( x ) = ∑ i = 1 2 N ∑ j = 1 n e i j v i j ( x − c i ) {\displaystyle \varphi \left(\mathbf {x} \right)=\sum _{i=1}^{2N}\sum _{j=1}^{n}e_{ij}v_{ij}{\big (}\mathbf {x} -\mathbf {c} _{i}{\big )}} where e i j = { a i , if i ∈ [ 1 , N ] b i j , if i ∈ [ N + 1 , 2 N ] {\displaystyle e_{ij}={\begin{cases}a_{i},&{\mbox{if }}i\in [1,N]\\b_{ij},&{\mbox{if }}i\in [N+1,2N]\end{cases}}} and v i j ( x − c i ) = d e f { δ i j ρ ( ‖ x − c i ‖ ) , if i ∈ [ 1 , N ] ( x i j − c i j ) ρ ( ‖ x − c i ‖ ) , if i ∈ [ N + 1 , 2 N ] {\displaystyle v_{ij}{\big (}\mathbf {x} -\mathbf {c} _{i}{\big )}\ {\stackrel {\mathrm {def} }{=}}\ {\begin{cases}\delta _{ij}\rho {\big (}\left\Vert \mathbf {x} -\mathbf {c} _{i}\right\Vert {\big )},&{\mbox{if }}i\in [1,N]\\\left(x_{ij}-c_{ij}\right)\rho {\big (}\left\Vert \mathbf {x} -\mathbf {c} _{i}\right\Vert {\big )},&{\mbox{if }}i\in [N+1,2N]\end{cases}}} in the unnormalized case and in the normalized case. Here δ i j {\displaystyle \delta _{ij}} is a Kronecker delta function defined as δ i j = { 1 , if i = j 0 , if i ≠ j {\displaystyle \delta _{ij}={\begin{cases}1,&{\mbox{if }}i=j\\0,&{\mbox{if }}i\neq j\end{cases}}} . == Training == RBF networks are typically trained from pairs of input and target values x ( t ) , y ( t ) {\displaystyle \mathbf {x} (t),y(t)} , t = 1 , … , T {\displaystyle t=1,\dots ,T} by a two-step algorithm. In the first step, the center vectors c i {\displaystyle \mathbf {c} _{i}} of the RBF functions in the hidden layer
Sentence embedding
In natural language processing, a sentence embedding is a representation of a sentence as a vector of numbers which encodes meaningful semantic information. State of the art embeddings are based on the learned hidden layer representation of dedicated sentence transformer models. BERT pioneered an approach involving the use of a dedicated [CLS] token prepended to the beginning of each sentence inputted into the model; the final hidden state vector of this token encodes information about the sentence and can be fine-tuned for use in sentence classification tasks. In practice however, BERT's sentence embedding with the [CLS] token achieves poor performance, often worse than simply averaging non-contextual word embeddings. SBERT later achieved superior sentence embedding performance by fine tuning BERT's [CLS] token embeddings through the usage of a siamese neural network architecture on the SNLI dataset. Other approaches are loosely based on the idea of distributional semantics applied to sentences. Skip-Thought trains an encoder-decoder structure for the task of neighboring sentences predictions; this has been shown to achieve worse performance than approaches such as InferSent or SBERT. An alternative direction is to aggregate word embeddings, such as those returned by Word2vec, into sentence embeddings. The most straightforward approach is to simply compute the average of word vectors, known as continuous bag-of-words (CBOW). However, more elaborate solutions based on word vector quantization have also been proposed. One such approach is the vector of locally aggregated word embeddings (VLAWE), which demonstrated performance improvements in downstream text classification tasks. == Applications == In recent years, sentence embedding has seen a growing level of interest due to its applications in natural language queryable knowledge bases through the usage of vector indexing for semantic search. LangChain for instance utilizes sentence transformers for purposes of indexing documents. In particular, an indexing is generated by generating embeddings for chunks of documents and storing (document chunk, embedding) tuples. Then given a query in natural language, the embedding for the query can be generated. A top k similarity search algorithm is then used between the query embedding and the document chunk embeddings to retrieve the most relevant document chunks as context information for question answering tasks. This approach is also known formally as retrieval-augmented generation. Though not as predominant as BERTScore, sentence embeddings are commonly used for sentence similarity evaluation which sees common use for the task of optimizing a Large language model's generation parameters is often performed via comparing candidate sentences against reference sentences. By using the cosine-similarity of the sentence embeddings of candidate and reference sentences as the evaluation function, a grid-search algorithm can be utilized to automate hyperparameter optimization. == Evaluation == A way of testing sentence encodings is to apply them on Sentences Involving Compositional Knowledge (SICK) corpus for both entailment (SICK-E) and relatedness (SICK-R). In the best results are obtained using a BiLSTM network trained on the Stanford Natural Language Inference (SNLI) Corpus. The Pearson correlation coefficient for SICK-R is 0.885 and the result for SICK-E is 86.3. A slight improvement over previous scores is presented in: SICK-R: 0.888 and SICK-E: 87.8 using a concatenation of bidirectional Gated recurrent unit.
Generalized blockmodeling of valued networks
Generalized blockmodeling of valued networks is an approach of the generalized blockmodeling, dealing with valued networks (e.g., non-binary). While the generalized blockmodeling signifies a "formal and integrated approach for the study of the underlying functional anatomies of virtually any set of relational data", it is in principle used for binary networks. This is evident from the set of ideal blocks, which are used to interpret blockmodels, that are binary, based on the characteristic link patterns. Because of this, such templates are "not readily comparable with valued empirical blocks". To allow generalized blockmodeling of valued directional (one-mode) networks (e.g. allowing the direct comparisons of empirical valued blocks with ideal binary blocks), a non–parametric approach is used. With this, "an optional parameter determines the prominence of valued ties as a minimum percentile deviation between observed and expected flows". Such two–sided application of parameter then introduces "the possibility of non–determined ties, i.e. valued relations that are deemed neither prominent (1) nor non–prominent (0)." Resulted occurrences of links then motivate the modification of the calculation of inconsistencies between empirical and ideal blocks. At the same time, such links also give a possibility to measure the interpretational certainty, which is specific to each ideal block. Such maximum two–sided deviation threshold, holding the aggregate uncertainty score at zero or near–zero levels, is then proposed as "a measure of interpretational certainty for valued blockmodels, in effect transforming the optional parameter into an outgoing state". Problem with blockmodeling is the standard set of ideal block, as they are all specified using binary link (tie) patters; this results in "a non–trivial exercise to match and count inconsistencies between such ideal binary ties and empirical valued ties". One approach to solve this is by using dichotomization to transform the network into a binary version. The other two approaches were first proposed by Aleš Žiberna in 2007 by introducing valued (generalized) blockmodeling and also homogeneity blockmodeling. The basic idea of the latter is "that the inconsistency of an empirical block with its ideal block can be measured by within block variability of appropriate values". The newly–formed ideal blocks, which are appropriate for blockmodeling of valued networks, are then presented together with the definitions of their block inconsistencies. Two other approaches were later suggested by Carl Nordlund in 2019: deviational approach and correlation-based generalized approach. Both Nordlund's approaches are based on the idea, that valued networks can be compared with the ideal block without values. With this approach, more information is retained for analysis, which also means, that there are fewer partitions having identical values of the criterion function. This means, that the generalized blockmodeling of valued networks measures the inconsistencies more precisely. Usually, only one optimal partition is found in this approach, especially when it is used by homogeneity blockmodeling. Contrary, while using binary blockmodeling on the same sample, usually more than one optimal partition had occurred on several occasions.