Symbaloo is a cloud-based site that allows users to organize and categorize web links in the form of buttons. Symbaloo works from a web browser and can be configured as a homepage, allowing users to create a personalized virtual desktop accessible from any device with an Internet connection. Symbaloo users, which must be previously registered, have a page with a grid of buttons that can be configured to link to a specific page. The site allows users to assign different colors to the buttons for easy visual classification. Symbaloo allows a single user to create different pages or screens with buttons. These screens called webmix are useful to separate topics and links can be shared with other users, making them public and sending the link via email. As of 2015 Symbaloo has 6 million users worldwide and mainly used as an online education resource. Symbaloo's slogan is "Start Simple".
Edge inference
Edge inference is the process of running machine learning or deep learning models on local devices (edge devices) such as smartphones, IoT devices, embedded systems, and edge servers instead of centralized cloud computing infrastructure. A key feature of edge computing is edge inference, which allows for real-time data processing, low latency, and improved privacy by reducing the amount of data sent to remote servers.
T-vertices
T-vertices is a term used in computer graphics to describe a problem that can occur during mesh refinement or mesh simplification. The most common case occurs in naive implementations of continuous level of detail, where a finer-level mesh is "sewn" together with a coarser-level mesh by simply aligning the finer vertices on the edges of the coarse polygons. The result is a continuous mesh, however due to the nature of the z-buffer and certain lighting algorithms such as Gouraud shading, visual artifacts can often be detected. Some modeling algorithms such as subdivision surfaces will fail when a model contains T-vertices.
Qapital
Qapital is a personal finance mobile application (app) for the iOS and Android operating systems, developed by Qapital, LLC. The app is designed to motivate users to save money through a gamification of their spending behavior. It moves money from a user's checking account to a separate Qapital account, when certain rules are triggered. Its database is used by psychology professor Dan Ariely to study consumer behavior. Qapital was released in Sweden in 2013, then in the US in early 2015. The application was later withdrawn from the Swedish market in April 2015, in order to focus on the US market. == History == The idea for Qapital was conceived by ex-bankers in Sweden. The software was designed by twin brothers Daniel and Andreas Källbom of Studio Källbom and released in Sweden in December 2013. The original software was a personal finance dashboard, similar to Mint.com, to show its users how they spent their money. Qapital introduced the app into the US market with a different design in 2014 and started focusing exclusively on the US market. The app was re-designed to focus on building savings rather than managing personal finances. The Swedish version shut down in April 2015. The app was initially restricted to the iOS platform, but an Android version was released at the end of 2015. Shortly after its US launch, Qapital invited psychology professor Dan Ariely to join its team as its "chief behavioral economist". He uses the app's database to conduct research into behavioral economics and Qapital in turn uses Ariely's research in design and programming decisions. In 2017, Qapital added checking and debit card services to the app. == Concept and features == Qapital is a free personal finance app for iOS and Android devices, intended to encourage its users to save money. Qapital directs each of its users to set savings goals, then automatically transfers money from their checking account to an account for savings, when a rule established in the app is met. It uses the "if this then that" (IFTTT) rule-based web-service. For example, one rule could be that if a user purchases a cup of coffee, then the app will round up the charge to the nearest dollar and deposit the difference into savings. Users connect their bank accounts to Qapital, so it knows when purchases are made. When a rule is met, money for savings are transferred to a Qapital account operated in partnership with Lincoln Savings Bank. As of 2015, Qapital can connect to more than 180 other apps, such as Facebook, Twitter, Dropbox and Instagram. For example, connecting to Jawbone allows the user to set a rule that if they take a certain number of steps during the day, a set amount of money is transferred to savings. The app also allows users to monitor activity among their other financial accounts, such as deposits and withdrawals. == Reception == In an October 2015 review, PC Magazine gave Qapital four out of five marks and an editor rating of "excellent." The review praised the app for having a "lovely design" and criticized it for being a, "bit simplistic in some of its rules." Bankrate, in a May 2015 review, gave the app a score of 3/5 for "ease of use," 5/5 for "features," 4/5 for "effectiveness," 4/5 for "value," for a total score of 16/20. The reviewer criticized Qapital's savings account for providing a low-interest rate, but concluded that its numerous features make the app "intriguing" and "it would be difficult to find a standard bank app more fun to use than Qapital."
Taimi
Taimi ( TAY-mee) is a dating app that caters to the LGBTQI+ community. The network matches its registered users based on their selected preferences and location. Originally an online dating service for gay men, by 2022 Taimi had become an app for all members of the LGBTQI+ community. It operates in more than 138 countries, including the US, UK, the Netherlands, Spain, Central and South America, Ukraine, and other European and Asian countries. Taimi runs on iOS and Android. The mobile app has a free and subscription-based premium version and offers a number of services for communication, including live streaming, chatting, and video calling. There is also an active blog that regularly posts articles and news about events of interest to the LGBTQ+ community. The application does not provide for non-Google e-mail log option, either phone number or Facebook account, during the registration process. The data controller for the non EU/UK users is based in a company, called Social Impact Inc., with its registered address at 1180 North Town Center Drive Suite 100, Las Vegas, Nevada, 89144, United States of America. == History == Taimi was launched in 2017 by Social Impact, Inc. in Las Vegas. Its founder, Alex Pasykov, originally called the app "Tame Me," a name that gradually morphed into Taimi. Over time, Taimi expanded into other countries, and expanding its reach to the LGBTQ+ community, so that, by 2022, it was fully inclusive of the entire queer community. In November 2020 the app was redesigned, with a new interface, branding, and logo. As of 2024, there are over 25 million registered users of Taimi worldwide. Pasykov states that he is an ally of the LGBTQ+ community and that he is focused on, among other things, partnering with NGOs to fight Homophobia and "regressive policies and laws" that negatively impact the community. == Features == Users register on the app and complete a profile, including personal information and preferences for compatibility, dating style, and relationship goals. An algorithm then finds and presents recommendations that a user accepts or rejects. Users are then free to chat via text or video with people they have connected with. Safety and security features include a two-step authentication process and an automated account verification along with a clear reporting system when breaches or policy violations occur. User responses to new features and policies drive changes and modifications that are made to all aspects of the site. == Partnerships and Collaborations == Taimi has a long history of collaborations and partnerships in Pride events, both in the US and abroad, including fund-raising efforts. Taimi has partnered with Rakuten Viber to create a bot focused on educating its members on key LGBTQ+ topics and to allow queer Viber users to connect. In 2023, Taimi collaborated with the Known Agency in an "America the Beautiful" campaign to shine a spotlight on current anti-LGBTQ+ policies and laws in a number of US states, and to counter these by highlighting the values and freedoms upon which America was founded. The campaign was nominated for The Drum Awards in the category "OOH For Good" and honored with the ANA Multicultural Excellence Award. Taimi also partnered with Goodparts, a queer-owned and operated retailer, in a "Body Beautiful" campaign focused on love and acceptance of all body types. In this campaign, well-known LGBTQ+ artists are providing artwork for Goodpart's product packaging. From October 31 to December 13, 2023, Taimi showed the "Taimi Moments" video, created in collaboration with Raygun Agency, on large screens between performances of LGBTQ+ artists Doja Cat, Ice Spice, and Doechii on their Scarlet Tour. In spring 2024, Taimi launched Queer Paradise, a series of live events in Southern California to celebrate diversity, sexual exploration, and dating fluidity. Each event in the series was curated to give the full spectrum of groups within the LGBTQ+ community a space to express their authentic selves. Taimi's partners for Queer Paradise include Hawtmess Productions, Eden Entertainment Group, Hump Events, Girls Gays & Theys, Damn Good Dyke Nights, and Gaybors Agency. In summer 2024, with support from GLAAD, Taimi has updated features and self-expression tools to better serve the LGBTQ+ people seeking connection in the app. Taimi allowed members to select multiple sexualities, unified the list of sexualities across all genders, added more pronoun options, and created a more inclusive and improved list of subcategories for non-binary users. Also, in summer 2024, Taimi has partnered with gender-affirming underwear brand Urbody to release a capsule collection. Focused on gender inclusivity and sexual fluidity, the capsule collection includes a range of underwear and compression tops intended to promote "joy, self-love and empowerment."
Reconstruction from projections
The problem of reconstructing a multidimensional signal from its projection is uniquely multidimensional, having no 1-D counterpart. It has applications that range from computer-aided tomography to geophysical signal processing. It is a problem which can be explored from several points of view—as a deconvolution problem, a modeling problem, an estimation problem, or an interpolation problem. == Motivation and applications == Many fields in science and engineering use reconstruction from projections, especially in imaging. It is widely applied geophysical tomography, medical imaging and industrial radiography. For example, in a CT scanner, the 3D structure of the patient’s body being scanned is measured with beams going through the tissue and hitting a detector, giving a flat projection of the body from that angle. Multiple projections are put together to get an image of the position and shape of structures inside in 3D. == Problem statement and basics == A projection is a linear mapping of an M {\displaystyle M} dimensional signal into an N {\displaystyle N} dimensional one, where N ≤ M {\displaystyle N\leq M} . And the objective of reconstruction is to restore the M {\displaystyle M} dimensional signal based on the N {\displaystyle N} dimensional signal. The following case is a 2-D signal projected into 1D signal. The signal in the original coordinate is denoted as d ( u , v ) {\displaystyle d(u,v)} . Now consider a collimated beam of radiation coming from the opposite orientation of v ^ {\displaystyle {\hat {v}}} , producing a projection along u ^ {\displaystyle {\hat {u}}} . v ^ {\displaystyle {\hat {v}}} and u ^ {\displaystyle {\hat {u}}} are normal to each other, and the angle between u {\displaystyle u} and u ^ {\displaystyle {\hat {u}}} is theta. The signal obtained along u ^ {\displaystyle {\hat {u}}} axis is defined to be p θ ( u ^ ) {\displaystyle p_{\theta }({\hat {u}})} . The relationship between the original coordinate and the rotated coordinate is given by [ u ^ v ^ ] = [ cos θ sin θ − sin θ cos θ ] [ u v ] {\displaystyle {\begin{bmatrix}{\hat {u}}\\{\hat {v}}\end{bmatrix}}={\begin{bmatrix}\cos \theta &\sin \theta \\-\sin \theta &\cos \theta \end{bmatrix}}{\begin{bmatrix}u\\v\end{bmatrix}}} or inversely, [ u v ] = [ cos θ − sin θ sin θ cos θ ] [ u ^ v ^ ] {\displaystyle {\begin{bmatrix}u\\v\end{bmatrix}}={\begin{bmatrix}\cos \theta &-\sin \theta \\\sin \theta &\cos \theta \end{bmatrix}}{\begin{bmatrix}{\hat {u}}\\{\hat {v}}\end{bmatrix}}} Then we have p θ ( u ^ ) = ∫ − ∞ ∞ d ( u , v ) d v ^ = ∫ − ∞ ∞ d ( u ^ cos ( θ ) − v ^ sin ( θ ) , u ^ sin ( θ ) + v ^ cos ( θ ) ) d v ^ {\displaystyle p_{\theta }({\hat {u}})=\int _{-\infty }^{\infty }d(u,v)\,\mathrm {d} {\hat {v}}=\int _{-\infty }^{\infty }d({\hat {u}}\cos(\theta )-{\hat {v}}\sin(\theta ),{\hat {u}}\sin(\theta )+{\hat {v}}\cos(\theta ))\,\mathrm {d} {\hat {v}}} By varying theta, a large number of projections can be obtained. Given the projection-slice theorem, D ( Ω , θ ) {\displaystyle D(\Omega ,\theta )} ,the slice of the Fourier transform of d ( u , v ) {\displaystyle d(u,v)} at angle theta, is equivalent to P θ ( Ω ) {\displaystyle P_{\theta }(\Omega )} , the Fourier Transform of the projection p θ ( u ^ ) {\displaystyle p_{\theta }({\hat {u}})} . Therefore, the unknown d ( u , v ) {\displaystyle d(u,v)} can be obtained from its Fourier transform by means of the Fourier transform inversion integral d ( u , v ) = 1 4 π 2 ∫ − ∞ ∞ ∫ − ∞ ∞ D ( Ω 1 , Ω 2 ) e j Ω 1 u e j Ω 2 v d Ω 1 , Ω 2 {\displaystyle \mathrm {d} (u,v)={\frac {1}{4\pi ^{2}}}\int _{-\infty }^{\infty }\int _{-\infty }^{\infty }D(\Omega _{1},\Omega _{2})e^{j\Omega _{1}u}e^{j\Omega _{2}v}\,\mathrm {d} \Omega _{1},\Omega _{2}} = 1 4 π 2 ∫ 0 ∞ ∫ − π π D ( Ω , θ ) e j Ω u cos ( θ ) e j Ω v s i n θ | Ω | d Ω d θ {\displaystyle ={\frac {1}{4\pi ^{2}}}\int _{0}^{\infty }\int _{-\pi }^{\pi }D(\Omega ,\theta )e^{j\Omega u\cos(\theta )}e^{j\Omega vsin\theta }{\begin{vmatrix}\Omega \end{vmatrix}}\,\mathrm {d} \Omega \mathrm {d} \theta } = 1 4 π 2 ∫ − π π ∫ 0 ∞ P θ ( Ω ) e j Ω ( u cos θ + v sin θ ) | Ω | d Ω d θ {\displaystyle ={\frac {1}{4\pi ^{2}}}\int _{-\pi }^{\pi }\int _{0}^{\infty }P_{\theta }(\Omega )e^{j}\Omega (u\cos \theta +v\sin \theta ){\begin{vmatrix}\Omega \end{vmatrix}}\,\mathrm {d} \Omega \mathrm {d} \theta } = 1 4 π 2 ∫ 0 π ( ∫ − ∞ ∞ P θ ( Ω ) | Ω | {\displaystyle ={\frac {1}{4\pi ^{2}}}\int _{0}^{\pi }(\int _{-\infty }^{\infty }P_{\theta }(\Omega ){\begin{vmatrix}\Omega \end{vmatrix}}} e j Ω u ^ d Ω ) d θ {\displaystyle e^{j\Omega {\hat {u}}}\mathrm {d} \Omega )\mathrm {d} \theta } By taking the inverse Fourier Transform and assuming g ( u ^ ) = F − 1 ( | Ω | 2 ) {\displaystyle g({\hat {u}})={\mathcal {F}}^{-1}({{\begin{vmatrix}\Omega \end{vmatrix}}^{2}})} , we get d ( u , v ) = ∑ i △ θ i [ p θ ( u ^ ) ∗ g θ i ( u ^ ) ] {\displaystyle d(u,v)=\sum _{i}\vartriangle \theta _{i}[p_{\theta }({\hat {u}})g_{\theta i}({\hat {u}})]} == Approaches == In practice, there are a wide variety of methods that are utilized, most of which are reconstruct 3-D information (volume) from 2-D signals (image). Typically used methods are CT, MRI, PET and SPECT. And the filtered back projection based on the principles introduced above are commonly applied. === Computed Tomography (CT) === In CT, a volume is formed by stacking the axial slices. The software cuts the volume in a different plane (usually orthogonal). Commonly, slice data is generated using an X-ray source that rotates around the object. X-ray sensors are positioned on the opposite side of the circle from the X-ray source. === Magnetic resonance imaging (MRI) === In MRI, energy from an oscillating magnetic field is temporarily applied to the patient at the appropriate resonance frequency. The protons (hydrogen atoms) emit a radio frequency signal which is measured by a receiving coil. The radio signal can be made to encode position information by varying the main magnetic field using gradient coils. === Positron emission tomography (PET) === The system detects pairs of gamma rays emitted indirectly by a positron-emitting radionuclide (tracer), which is introduced into the body on a biologically active molecule. Three-dimensional images of tracer concentration within the body are then constructed by computer analysis. In modern PET-CT scanners, three dimensional imaging is often accomplished with the aid of a CT X-ray scan performed on the patient during the same session, in the same machine. === Single-photon emission computed tomography (SPECT) === SPECT imaging is performed by using a gamma camera to acquire multiple 2-D images (projections) from multiple angles. Multiple projections are used to yield a 3-D data set. This data set may then be manipulated to show thin slices along any chosen axis of the body. SPECT is similar to PET in its use of radioactive tracer material and detection of gamma rays, while the tracers used in SPECT emit gamma radiation that is measured more directly.
Database
In computing, a database is an organized collection of data or a type of data store based on the use of a database management system (DBMS), the software that interacts with end users, applications, and the database itself to capture and analyze the data. The DBMS additionally encompasses the core facilities provided to administer the database. The sum total of the database, the DBMS and the associated applications can be referred to as a database system. Often the term "database" is also used loosely to refer to any of the DBMS, the database system or an application associated with the database. Before digital storage and retrieval of data became widespread, index cards were used for data storage in a wide range of applications and environments: in the home to record and store recipes, shopping lists, contact information and other organizational data; in business to record presentation notes, project research and notes, and contact information; in schools as flash cards or other visual aids; and in academic research to hold data such as bibliographical citations or notes in a card file. Professional book indexers used index cards in the creation of book indexes until they were replaced by indexing software in the 1980s and 1990s. Small databases can be stored on a file system, while large databases are hosted on computer clusters or cloud storage. The design of databases spans formal techniques and practical considerations, including data modeling, efficient data representation and storage, query languages, security and privacy of sensitive data, and distributed computing issues, including supporting concurrent access and fault tolerance. Computer scientists may classify database management systems according to the database models that they support. Relational databases became dominant in the 1980s. These model data as rows and columns in a series of tables, and the vast majority use SQL for writing and querying data. In the 2000s, non-relational databases became popular, collectively referred to as NoSQL, because they use different query languages. == Terminology and overview == Formally, a "database" refers to a set of related data accessed through the use of a "database management system" (DBMS), which is an integrated set of computer software that allows users to interact with one or more databases and provides access to all of the data contained in the database (although restrictions may exist that limit access to particular data). The DBMS provides various functions that allow entry, storage and retrieval of large quantities of information and provides ways to manage how that information is organized. Because of the close relationship between them, the term "database" is often used casually to refer to both a database and the DBMS used to manipulate it. Outside the world of professional information technology, the term database is often used to refer to any collection of related data (such as a spreadsheet or a card index) as size and usage requirements typically necessitate use of a database management system. Existing DBMSs provide various functions that allow management of a database and its data which can be classified into four main functional groups: Data definition – Creation, modification and removal of definitions that detail how the data is to be organized. Update – Insertion, modification, and deletion of the data itself. Retrieval – Selecting data according to specified criteria (e.g., a query, a position in a hierarchy, or a position in relation to other data) and providing that data either directly to the user, or making it available for further processing by the database itself or by other applications. The retrieved data may be made available in a more or less direct form without modification, as it is stored in the database, or in a new form obtained by altering it or combining it with existing data from the database. Administration – Registering and monitoring users, enforcing data security, monitoring performance, maintaining data integrity, dealing with concurrency control, and recovering information that has been corrupted by some event such as an unexpected system failure. Both a database and its DBMS conform to the principles of a particular database model. "Database system" refers collectively to the database model, database management system, and database. Physically, database servers are dedicated computers that hold the actual databases and run only the DBMS and related software. Database servers are usually multiprocessor computers, with generous memory and RAID disk arrays used for stable storage. Hardware database accelerators, connected to one or more servers via a high-speed channel, are also used in large-volume transaction processing environments. DBMSs are found at the heart of most database applications. DBMSs may be built around a custom multitasking kernel with built-in networking support, but modern DBMSs typically rely on a standard operating system to provide these functions. Since DBMSs comprise a significant market, computer and storage vendors often take into account DBMS requirements in their own development plans. Databases and DBMSs can be categorized according to the database model(s) that they support (such as relational or XML), the type(s) of computer they run on (from a server cluster to a mobile phone), the query language(s) used to access the database (such as SQL or XQuery), and their internal engineering, which affects performance, scalability, resilience, and security. == History == The sizes, capabilities, and performance of databases and their respective DBMSs have grown in orders of magnitude. These performance increases were enabled by the technology progress in the areas of processors, computer memory, computer storage, and computer networks. The concept of a database was made possible by the emergence of direct access storage media such as magnetic disks, which became widely available in the mid-1960s; earlier systems relied on sequential storage of data on magnetic tape. The subsequent development of database technology can be divided into three eras based on data model or structure: navigational, SQL/relational, and post-relational. The two main early navigational data models were the hierarchical model and the CODASYL model (network model). These were characterized by the use of pointers (often physical disk addresses) to follow relationships from one record to another. The relational model, first proposed in 1970 by Edgar F. Codd, departed from this tradition by insisting that applications should search for data by content, rather than by following links. The relational model employs sets of ledger-style tables, each used for a different type of entity. Only in the mid-1980s did computing hardware become powerful enough to allow the wide deployment of relational systems (DBMSs plus applications). By the early 1990s, however, relational systems dominated in all large-scale data processing applications, and as of 2018 they remain dominant: IBM Db2, Oracle, MySQL, and Microsoft SQL Server are the most searched DBMS. The dominant database language, standardized SQL for the relational model, has influenced database languages for other data models. Object databases were developed in the 1980s to overcome the inconvenience of object–relational impedance mismatch, which led to the coining of the term "post-relational" and also the development of hybrid object–relational databases. The next generation of post-relational databases in the late 2000s became known as NoSQL databases, introducing fast key–value stores and document-oriented databases. A competing "next generation" known as NewSQL databases attempted new implementations that retained the relational/SQL model while aiming to match the high performance of NoSQL compared to commercially available relational DBMSs. === 1960s, navigational DBMS === The introduction of the term database coincided with the availability of direct-access storage (disks and drums) from the mid-1960s onwards. The term represented a contrast with the tape-based systems of the past, allowing shared interactive use rather than daily batch processing. The Oxford English Dictionary cites a 1962 report by the System Development Corporation of California as the first to use the term "data-base" in a specific technical sense. As computers grew in speed and capability, a number of general-purpose database systems emerged; by the mid-1960s a number of such systems had come into commercial use. Interest in a standard began to grow, and Charles Bachman, author of one such product, the Integrated Data Store (IDS), founded the Database Task Group within CODASYL, the group responsible for the creation and standardization of COBOL. In 1971, the Database Task Group delivered their standard, which generally became known as the CODASYL approach, and soon a number of commercial products based on this approach entered the market. The CODASYL approach of