Basic Formal Ontology (BFO) is a top-level ontology developed by Barry Smith and colleagues to promote interoperability among domain ontologies. The BFO methodology accomplishes this through a process of downward population. BFO is a formal ontology. The structure of BFO is based on a division of entities into two disjoint categories of continuant and occurrent, the former consists of objects and spatial regions, the latter contains processes conceived as extended through (or spanning) time. BFO thereby seeks to consolidate both time and space within a single framework A guide to building BFO-conformant domain ontologies was published by MIT Press in 2015. In 2021, the standard ISO/IEC 21838-2:2021 Information Technology — Top-level Ontologies (TLO) — Part 2: Basic Formal Ontology (BFO) was published by the Joint Technical Committee of the International Standards Organization and the International Electrotechnical Commission. ISO/IEC 21838 is a multi-part standard. Part 1 of the standard specifies the requirements that must be met if an ontology is to be classified as a top-level ontology by the standard. == History == BFO arose against the background of research in ontologies in the domain of geospatial information science by David Mark, Pierre Grenon, Achille Varzi and others, with a special role for the study of vagueness and of the ways sharp boundaries in the geospatial and other domains are created by fiat. BFO has passed through four major releases. 2001: release of BFO 1 2007: release of BFO 1.1 2015: release of BFO 2.0 2020: release of BFO 2020 2021: release of BFO 2020 as an ISO/IEC Standard The current revision was released in 2020, and this forms the basis of the standard ISO/IEC 21838-2, which was released by the Joint Committee of the International Standards Organization and International Electrotechnical Commission in 2021. == Applications == BFO has been adopted as a foundational ontology by over 650 ontology projects, principally in the areas of biomedical ontology, security and defense (intelligence) ontology, and industry ontologies. Example applications of BFO can be seen in the Ontology for Biomedical Investigations (OBI). In January 2024, BFO and the Common Core Ontologies (CCO), a suite of BFO-extension ontologies, were adopted as the "baseline standards for formal DOD and IC ontology" development work in the DOD and Intelligence Community. A memorandum to this effect was signed by the chief data officers of the DOD, the Office of the Director of National Intelligence and the Chief Digital and Artificial Intelligence Office.
Turret lathe
A turret lathe is a form of metalworking lathe that is used for repetitive production of duplicate parts, which by the nature of their cutting process are usually interchangeable. It evolved from earlier lathes with the addition of the turret, which is an indexable toolholder that allows multiple cutting operations to be performed, each with a different cutting tool, in easy, rapid succession, with no need for the operator to perform set-up tasks in between (such as installing or uninstalling tools) or to control the toolpath. The latter is due to the toolpath's being controlled by the machine, either in jig-like fashion, via the mechanical limits placed on it by the turret's slide and stops, or via digitally-directed servomechanisms for computer numerical control lathes. The name derives from the way early turrets took the general form of a flattened cylindrical block mounted to the lathe's cross-slide, capable of rotating about the vertical axis and with toolholders projecting out to all sides, and thus vaguely resembled a swiveling gun turret. Capstan lathe is the usual name in the UK and Commonwealth, though the two terms are also used in contrast: see below, Capstan versus turret. == History == Turret lathes became indispensable to the production of interchangeable parts and for mass production. The first turret lathe was built by Stephen Fitch in 1845 to manufacture screws for pistol percussion parts. In the mid-nineteenth century, the need for interchangeable parts for Colt revolvers enhanced the role of turret lathes in achieving this goal as part of the "American system" of manufacturing arms. Clock-making and bicycle manufacturing had similar requirements. Christopher Spencer invented the first fully automated turret lathe in 1873, which led to designs using cam action or hydraulic mechanisms. From the late-19th through mid-20th centuries, turret lathes, both manual and automatic (i.e., screw machines and chuckers), were one of the most important classes of machine tools for mass production. They were used extensively in the mass production for the war effort in World War II. The U.S. company Warner & Swasey was one of the premier brands in heavy turret lathes between the 1910s and 1960s; it became the world's largest manufacturer of such lathes by 1928. During World War II, it employed 7,000 people and produced half of the turret lathes manufactured in the United States. == Types == There are many variants of the turret lathe. They can be most generally classified by size (small, medium, or large); method of control (manual, automated mechanically, or automated via computer (numerical control (NC) or computer numerical control (CNC)); and bed orientation (horizontal or vertical). === Archetypical: horizontal, manual === In the late 1830s a "capstan lathe" with a turret was patented in Britain. The first American turret lathe was invented by Stephen Fitch in 1845. The archetypical turret lathe, and the first in order of historical appearance, is the horizontal-bed, manual turret lathe. The term "turret lathe" without further qualification is still understood to refer to this type. The formative decades for this class of machine were the 1840s through 1860s, when the basic idea of mounting an indexable turret on a bench lathe or engine lathe was born, developed, and disseminated from the originating shops to many other factories. Some important tool-builders in this development were Stephen Fitch; Gay, Silver & Co.; Elisha K. Root of Colt; J.D. Alvord of the Sharps Armory; Frederick W. Howe, Richard S. Lawrence, and Henry D. Stone of Robbins & Lawrence; J.R. Brown of Brown & Sharpe; and Francis A. Pratt of Pratt & Whitney. Various designers at these and other firms later made further refinements. === Semi-automatic === Sometimes machines similar to those above, but with power feeds and automatic turret-indexing at the end of the return stroke, are called "semi-automatic turret lathes". This nomenclature distinction is blurry and not consistently observed. The term "turret lathe" encompasses them all. During the 1860s, when semi-automatic turret lathes were developed, they were sometimes called "automatic". What we today would call "automatics", that is, fully automatic machines, had not been developed yet. During that era both manual and semi-automatic turret lathes were sometimes called "screw machines", although we today reserve that term for fully automatic machines. === Automatic === During the 1870s through 1890s, the mechanically automated "automatic" turret lathe was developed and disseminated. These machines can execute many part-cutting cycles without human intervention. Thus the duties of the operator, which were already greatly reduced by the manual turret lathe, were even further reduced, and productivity increased. These machines use cams to automate the sliding and indexing of the turret and the opening and closing of the chuck. Thus, they execute the part-cutting cycle somewhat analogously to the way in which an elaborate cuckoo clock performs an automated theater show. Small- to medium-sized automatic turret lathes are usually called "screw machines" or "automatic screw machines", while larger ones are usually called "automatic chucking lathes", "automatic chuckers", or "chuckers". Such machine tools of the "automatic" variety, which in the pre-computer era meant mechanically automated, had already reached a highly advanced state by World War I. === Computer numerical control === When World War II ended, the digital computer was poised to develop from a colossal laboratory curiosity into a practical technology that could begin to disseminate into business and industry. The advent of computer-based automation in machine tools via numerical control (NC) and then computer numerical control (CNC) displaced to a large extent, but not at all completely, the previously existing manual and mechanically automated machines. Numerically controlled turrets allow automated selection of tools on a turret. CNC lathes may be horizontal or vertical in orientation and mount six separate tools on one or more turrets. Such machine tools can work in two axes per turret, with up to six axes being feasible for complex work. === Vertical === Vertical turret lathes have the workpiece held vertically, which allows the headstock to sit on the floor and the faceplate to become a horizontal rotating table, analogous to a huge potter's wheel. This is useful for the handling of very large, heavy, short workpieces. Vertical lathes in general are also called "vertical boring mills" or often simply "boring mills"; therefore a vertical turret lathe is a vertical boring mill equipped with a turret. == Other variations == === Capstan versus turret === The term "capstan lathe" overlaps in sense with the term "turret lathe" to a large extent. In many times and places, it has been understood to be synonymous with "turret lathe". In other times and places it has been held in technical contradistinction to "turret lathe", with the difference being in whether the turret's slide is fixed to the bed (ram-type turret) or slides on the bed's ways (saddle-type turret). The difference in terminology is mostly a matter of United Kingdom and Commonwealth usage versus United States usage. === Flat === A subtype of horizontal turret lathe is the flat-turret lathe. Its turret is flat (and analogous to a rotary table), allowing the turret to pass beneath the part. Patented by James Hartness of Jones & Lamson, and first disseminated in the 1890s, it was developed to provide more rigidity via requiring less overhang in the tool setup, especially when the part is relatively long. === Hollow-hexagon === Hollow-hexagon turret lathes competed with flat-turret lathes by taking the conventional hexagon turret and making it hollow, allowing the part to pass into it during the cut, analogously to how the part would pass over the flat turret. In both cases, the main idea is to increase rigidity by allowing a relatively long part to be turned without the tool overhang that would be needed with a conventional turret, which is not flat or hollow. === Monitor lathe === The term "monitor lathe" formerly (1860s–1940s) referred to the class of small- to medium-sized manual turret lathes used on relatively small work. The name was inspired by the monitor-class warships, which the monitor lathe's turret resembled. Today, lathes of such appearance, such as the Hardinge DSM-59 and its many clones, are still common, but the name "monitor lathe" is no longer current in the industry. === Toolpost turrets and tailstock turrets === Turrets can be added to non-turret lathes (bench lathes, engine lathes, toolroom lathes, etc.) by mounting them on the toolpost, tailstock, or both. Often these turrets are not as large as a turret lathe's, and they usually do not offer the sliding and stopping that a turret lathe's turret does; but they do offer the ability to index through successive tool
Artificial general intelligence
Artificial general intelligence (AGI) is a hypothetical type of artificial intelligence that matches or surpasses human capabilities across virtually all cognitive tasks. Beyond AGI, artificial superintelligence (ASI) would outperform the best human abilities across every domain by a wide margin. Unlike artificial narrow intelligence (ANI), whose competence is confined to well‑defined tasks, an AGI system can generalise knowledge, transfer skills between domains, and solve novel problems without task‑specific reprogramming. Creating AGI is a stated goal of technology companies such as OpenAI, Google, xAI, and Meta. A 2020 survey identified 72 active AGI research and development projects across 37 countries. AGI is a common topic in science fiction and futures studies. Contention exists over whether AGI represents an existential risk. Some AI experts and industry figures have stated that mitigating the risk of human extinction posed by AGI should be a global priority. Others find the development of AGI to be in too remote a stage to present such a risk. == Terminology == AGI is also known as strong AI, full AI, human-level AI, human-level intelligent AI, or general intelligent action. The term "artificial general intelligence" was used in 1997 by Mark Gubrud in a discussion of the implications of fully automated military production and operations. A mathematical formalism of AGI named AIXI was proposed in 2000 by Marcus Hutter, who defines intelligence as "an agent’s ability to achieve goals or succeed in a wide range of environments". This type of AGI has also been called "universal artificial intelligence". The term AGI was re-introduced and popularized by Shane Legg and Ben Goertzel around 2002. Some academic sources reserve the term "strong AI" for computer programs that will experience sentience or consciousness. In contrast, weak AI (or narrow AI) can solve a specific problem but lacks general cognitive abilities. Some academic sources use "weak AI" to refer more broadly to any programs that neither experience consciousness nor have a mind in the same sense as humans. Related concepts include artificial superintelligence and transformative AI. An artificial superintelligence (ASI) is a hypothetical type of AGI that is much more generally intelligent than humans, while the notion of transformative AI relates to AI having a large impact on society, for example, similar to the agricultural or industrial revolution. A framework for classifying AGI was proposed in 2023 by Google DeepMind researchers. They define five performance levels of AGI: emerging, competent, expert, virtuoso, and superhuman. For example, a competent AGI is defined as an AI that outperforms 50% of skilled adults in a wide range of non-physical tasks, and a superhuman AGI (i.e., an artificial superintelligence) is similarly defined but with a threshold of 100%. They consider large language models like ChatGPT or LLaMA 2 to be instances of emerging AGI (comparable to unskilled humans). Regarding the autonomy of AGI and associated risks, they define five levels: tool (fully in human control), consultant, collaborator, expert, and agent (fully autonomous). == Characteristics == There is no single agreed-upon definition of intelligence as applied to computers. Computer scientist John McCarthy wrote in 2007: "We cannot yet characterize in general what kinds of computational procedures we want to call intelligent." === Intelligence traits === Researchers generally hold that a system is required to do all of the following to be regarded as an AGI: reason, use strategy, solve puzzles, and make judgments under uncertainty, represent knowledge, including common sense knowledge, plan, learn, communicate in natural language, if necessary, integrate these skills in completion of any given goal. Many interdisciplinary approaches (e.g. cognitive science, computational intelligence, and decision making) consider additional traits such as imagination (the ability to form novel mental images and concepts) and autonomy. Computer-based systems exhibiting these capabilities are now widespread, with modern large language models demonstrating computational creativity, automated reasoning, and decision support simultaneously across domains. === Physical traits === Other capabilities are considered desirable in intelligent systems, as they may affect intelligence or aid in its expression. These include: the ability to sense (e.g. see, hear, etc.), and the ability to act (e.g. move and manipulate objects, change location to explore, etc.) This includes the ability to detect and respond to hazard. === Tests for human-level AGI === Several tests meant to confirm human-level AGI have been considered. ==== Turing test ==== The Turing test was proposed by Alan Turing in his 1950 paper "Computing Machinery and Intelligence". This test involves a human judge engaging in natural language conversations with both a human and a machine designed to generate human-like responses. The machine passes the test if it can convince the judge that it is human a significant fraction of the time. Turing proposed this as a practical measure of machine intelligence, focusing on the ability to produce human-like responses rather than on the internal workings of the machine. The idea of the test is that the machine has to try and pretend to be a man, by answering questions put to it, and it will only pass if the pretence is reasonably convincing. A considerable portion of a jury, who should not be experts about machines, must be taken in by the pretence. In 2014, a chatbot named Eugene Goostman, designed to imitate a 13-year-old Ukrainian boy, reportedly passed a Turing Test event by convincing 33% of judges that it was human. However, this claim was met with significant skepticism from the AI research community, who questioned the test's implementation and its relevance to AGI. A 2025 pre‑registered, three‑party Turing‑test study by Cameron R. Jones and Benjamin K. Bergen showed that GPT-4.5 was judged to be the human in 73% of five‑minute text conversations—surpassing the 67% humanness rate of real confederates and meeting the researchers' criterion for having passed the test. ==== Ikea test ==== The "Ikea test", also known as the Flat Pack Furniture Test, involves an AI controlling a robot which attempts to assemble an Ikea flat-pack furniture product after having been shown the parts and instructions. As early as 2013, MIT's IkeaBot demonstrated fully autonomous multi-robot assembly of an IKEA Lack table in ten minutes, with no human intervention and no pre-programmed assembly instructions. The robots inferred the assembly sequence from the geometry of the parts alone. ==== Coffee test ==== Steve Wozniak proposed a test where a machine is required to enter an average American home and figure out how to make coffee. It must find the coffee machine, find the coffee, add water, find a mug, and brew the coffee by pushing the proper buttons. This test has been substantially approached across multiple systems. In January 2024, Figure AI's Figure 01 humanoid learned to operate a Keurig coffee machine autonomously after watching video demonstrations, using end-to-end neural networks to translate visual input into motor actions. In 2025, researchers at the University of Edinburgh published the ELLMER framework in Nature Machine Intelligence, demonstrating a robotic arm that interprets verbal instructions, analyses its surroundings, and autonomously makes coffee in dynamic kitchen environments — adapting to unforeseen obstacles in real time rather than following pre-programmed sequences. ==== Suleyman's test ==== Mustafa Suleyman's test proposes giving an AI model US$100,000 and asking it to obtain US$1 million. ==== Use of video-games ==== Adams, et al. propose that the ability to learn and succeed in a wide range of video games can be used to test AI intelligence. This range would include games unknown to the AGI developers before the test is administered. === AI-complete problems === A problem is informally called "AI-complete" or "AI-hard" if it is believed that AGI would be needed to solve it, because the solution is beyond the capabilities of a purpose-specific algorithm. == History == === Classical AI === Modern AI research began in the mid-1950s. The first generation of AI researchers were convinced that artificial general intelligence was possible and that it would exist in just a few decades. AI pioneer Herbert A. Simon wrote in 1965: "machines will be capable, within twenty years, of doing any work a man can do". Their predictions were the inspiration for Stanley Kubrick and Arthur C. Clarke's fictional character HAL 9000, who embodied what AI researchers believed they could create by the year 2001. AI pioneer Marvin Minsky was a consultant on the project of making HAL 9000 as realistic as possible according to the consensus predictions of the time. He said in 1967, "Within a generation... the problem of
Neurorobotics
Neurorobotics is the combined study of neuroscience, robotics, and artificial intelligence. It is the science and technology of embodied autonomous neural systems. Neural systems include brain-inspired algorithms (e.g. connectionist networks), computational models of biological neural networks (e.g. artificial spiking neural networks, large-scale simulations of neural microcircuits) and actual biological systems (e.g. in vivo and in vitro neural nets). Such neural systems can be embodied in machines with mechanic or any other forms of physical actuation. This includes robots, prosthetic or wearable systems but also, at smaller scale, micro-machines and, at the larger scales, furniture and infrastructures. Neurorobotics is that branch of neuroscience with robotics, which deals with the study and application of science and technology of embodied autonomous neural systems like brain-inspired algorithms. It is based on the idea that the brain is embodied and the body is embedded in the environment. Therefore, most neurorobots are required to function in the real world, as opposed to a simulated environment. Beyond brain-inspired algorithms for robots neurorobotics may also involve the design of brain-controlled robot systems. == Major classes of models == Neurorobots can be divided into various major classes based on the robot's purpose. Each class is designed to implement a specific mechanism of interest for study. Common types of neurorobots are those used to study motor control, memory, action selection, and perception. === Locomotion and motor control === Neurorobots are often used to study motor feedback and control systems, and have proved their merit in developing controllers for robots. Locomotion is modeled by a number of neurologically inspired theories on the action of motor systems. Locomotion control has been mimicked using models or central pattern generators, clumps of neurons capable of driving repetitive behavior, to make four-legged walking robots. Other groups have expanded the idea of combining rudimentary control systems into a hierarchical set of simple autonomous systems. These systems can formulate complex movements from a combination of these rudimentary subsets. This theory of motor action is based on the organization of cortical columns, which progressively integrate from simple sensory input into a complex afferent signals, or from complex motor programs to simple controls for each muscle fiber in efferent signals, forming a similar hierarchical structure. Another method for motor control uses learned error correction and predictive controls to form a sort of simulated muscle memory. In this model, awkward, random, and error-prone movements are corrected for using error feedback to produce smooth and accurate movements over time. The controller learns to create the correct control signal by predicting the error. Using these ideas, robots have been designed which can learn to produce adaptive arm movements or to avoid obstacles in a course. === Learning and memory systems === Robots designed to test theories of animal memory systems. Many studies examine the memory system of rats, particularly the rat hippocampus, dealing with place cells, which fire for a specific location that has been learned. Systems modeled after the rat hippocampus are generally able to learn mental maps of the environment, including recognizing landmarks and associating behaviors with them, allowing them to predict the upcoming obstacles and landmarks. Another study has produced a robot based on the proposed learning paradigm of barn owls for orientation and localization based on primarily auditory, but also visual stimuli. The hypothesized method involves synaptic plasticity and neuromodulation, a mostly chemical effect in which reward neurotransmitters such as dopamine or serotonin affect the firing sensitivity of a neuron to be sharper. The robot used in the study adequately matched the behavior of barn owls. Furthermore, the close interaction between motor output and auditory feedback proved to be vital in the learning process, supporting active sensing theories that are involved in many of the learning models. Neurorobots in these studies are presented with simple mazes or patterns to learn. Some of the problems presented to the neurorobot include recognition of symbols, colors, or other patterns and execute simple actions based on the pattern. In the case of the barn owl simulation, the robot had to determine its location and direction to navigate in its environment. === Action selection and value systems === Action selection studies deal with negative or positive weighting to an action and its outcome. Neurorobots can and have been used to study simple ethical interactions, such as the classical thought experiment where there are more people than a life raft can hold, and someone must leave the boat to save the rest. However, more neurorobots used in the study of action selection contend with much simpler persuasions such as self-preservation or perpetuation of the population of robots in the study. These neurorobots are modeled after the neuromodulation of synapses to encourage circuits with positive results. In biological systems, neurotransmitters such as dopamine or acetylcholine positively reinforce neural signals that are beneficial. One study of such interaction involved the robot Darwin VII, which used visual, auditory, and a simulated taste input to "eat" conductive metal blocks. The arbitrarily chosen good blocks had a striped pattern on them while the bad blocks had a circular shape on them. The taste sense was simulated by conductivity of the blocks. The robot had positive and negative feedbacks to the taste based on its level of conductivity. The researchers observed the robot to see how it learned its action selection behaviors based on the inputs it had. Other studies have used herds of small robots which feed on batteries strewn about the room, and communicate its findings to other robots. === Sensory perception === Neurorobots have also been used to study sensory perception, particularly vision. These are primarily systems that result from embedding neural models of sensory pathways in automatas. This approach gives exposure to the sensory signals that occur during behavior and also enables a more realistic assessment of the degree of robustness of the neural model. It is well known that changes in the sensory signals produced by motor activity provide useful perceptual cues that are used extensively by organisms. For example, researchers have used the depth information that emerges during replication of human head and eye movements to establish robust representations of the visual scene. == Biological robots == Biological robots are not officially neurorobots in that they are not neurologically inspired AI systems, but actual neuron tissue wired to a robot. This employs the use of cultured neural networks to study brain development or neural interactions. These typically consist of a neural culture raised on a multielectrode array (MEA), which is capable of both recording the neural activity and stimulating the tissue. In some cases, the MEA is connected to a computer which presents a simulated environment to the brain tissue and translates brain activity into actions in the simulation, as well as providing sensory feedback The ability to record neural activity gives researchers a window into a brain, which they can use to learn about a number of the same issues neurorobots are used for. An area of concern with the biological robots is ethics. Many questions are raised about how to treat such experiments. The central question concerns consciousness and whether or not the rat brain experiences it. There are many theories about how to define consciousness. == Implications for neuroscience == Neuroscientists benefit from neurorobotics because it provides a blank slate to test various possible methods of brain function in a controlled and testable environment. While robots are more simplified versions of the systems they emulate, they are more specific, allowing more direct testing of the issue at hand. They also have the benefit of being accessible at all times, while it is more difficult to monitor large portions of a brain while the human or animal is active, especially individual neurons. The development of neuroscience has produced neural treatments. These include pharmaceuticals and neural rehabilitation. Progress is dependent on an intricate understanding of the brain and how exactly it functions. It is difficult to study the brain, especially in humans, due to the danger associated with cranial surgeries. Neurorobots can improved the range of tests and experiments that can be performed in the study of neural processes.
Equalized odds
Equalized odds, also referred to as conditional procedure accuracy equality and disparate mistreatment, is a measure of fairness in machine learning. A classifier satisfies this definition if the subjects in the protected and unprotected groups have equal true positive rate and equal false positive rate, satisfying the formula: P ( R = + | Y = y , A = a ) = P ( R = + | Y = y , A = b ) y ∈ { + , − } ∀ a , b ∈ A {\displaystyle P(R=+|Y=y,A=a)=P(R=+|Y=y,A=b)\quad y\in \{+,-\}\quad \forall a,b\in A} For example, A {\displaystyle A} could be gender, race, or any other characteristics that we want to be free of bias, while Y {\displaystyle Y} would be whether the person is qualified for the degree, and the output R {\displaystyle R} would be the school's decision whether to offer the person to study for the degree. In this context, higher university enrollment rates of African Americans compared to whites with similar test scores might be necessary to fulfill the condition of equalized odds, if the "base rate" of Y {\displaystyle Y} differs between the groups. The concept was originally defined for binary-valued Y {\displaystyle Y} . In 2017, Woodworth et al. generalized the concept further for multiple classes.
Cloud robotics
Cloud robotics is a field of robotics that attempts to invoke cloud technologies such as cloud computing, cloud storage, and other Internet technologies centered on the benefits of converged infrastructure and shared services for robotics. When connected to the cloud, robots can benefit from the powerful computation, storage, and communication resources of a modern data center in the cloud, which can process and share information from various robots or agents (other machines, smart objects, humans, etc.). Humans can also delegate tasks to robots remotely through networks. Cloud computing technologies enable robot systems to be gain capability whilst reducing costs through cloud technologies. Thus, it is possible to build lightweight, low-cost, smarter robots with an intelligent "brain" in the cloud. The "brain" consists of data center, knowledge base, task planners, deep learning, information processing, environment models, communication support, etc. == Components == A cloud for robots potentially has at least six significant components: Building a "cloud brain" for robots, the main object of cloud robotics; Offering a global library of images, maps, and object data, often with geometry and mechanical properties, expert system, knowledge base (i.e. semantic web, data centres); Massively-parallel computation on demand for sample-based statistical modelling and motion planning, task planning, multi-robot collaboration, scheduling and coordination of system; Robot sharing of outcomes, trajectories, and dynamic control policies and robot learning support; Human sharing of open-source code, data, and designs for programming, experimentation, and hardware construction; On-demand human guidance and assistance for evaluation, learning, and error recovery; Augmented human–robot interaction through various ways (semantics knowledge base, Apple SIRI like service, etc.). == Applications == Autonomous mobile robots Google's self-driving cars are cloud robots. The cars use the network to access Google's enormous database of maps and satellite and environment model (like Streetview) and combines it with streaming data from GPS, cameras, and 3D sensors to monitor its own position within centimetres, and with past and current traffic patterns to avoid collisions. Each car can learn something about environments, roads, or driving, or conditions, and it sends the information to the Google cloud, where it can be used to improve the performance of other cars. Cloud medical robots a medical cloud (also called a healthcare cluster) consists of various services such as a disease archive, electronic medical records, a patient health management system, practice services, analytics services, clinic solutions, expert systems, etc. A robot can connect to the cloud to provide clinical service to patients, as well as deliver assistance to doctors (e.g. a co-surgery robot). Moreover, it also provides a collaboration service by sharing information between doctors and care givers about clinical treatment. Assistive robots A domestic robot can be employed for healthcare and life monitoring for elderly people. The system collects the health status of users and exchange information with cloud expert system or doctors to facilitate elderly peoples life, especially for those with chronic diseases. For example, the robots are able to provide support to prevent the elderly from falling down, emergency healthy support such as heart disease, blooding disease. Care givers of elderly people can also get notification when in emergency from the robot through network. Industrial robots As highlighted by the German government's Industry 4.0 Plan, "Industry is on the threshold of the fourth industrial revolution. Driven by the Internet, the real and virtual worlds are growing closer and closer together to form the Internet of Things. Industrial production of the future will be characterised by the strong individualisation of products under the conditions of highly flexible (large series) production, the extensive integration of customers and business partners in business and value-added processes, and the linking of production and high-quality services leading to so-called hybrid products." In manufacturing, such cloud based robot systems could learn to handle tasks such as threading wires or cables, or aligning gaskets from a professional knowledge base. A group of robots can share information for some collaborative tasks. Even more, a consumer is able to place customised product orders to manufacturing robots directly with online ordering systems. Another potential paradigm is shopping-delivery robot systems. Once an order is placed, a warehouse robot dispatches the item to an autonomous car or autonomous drone to deliver it to its recipient. == Research == RoboEarth was funded by the European Union's Seventh Framework Programme for research, technological development projects, specifically to explore the field of cloud robotics. The goal of RoboEarth is to allow robotic systems to benefit from the experience of other robots, paving the way for rapid advances in machine cognition and behaviour, and ultimately, for more subtle and sophisticated human-machine interaction. RoboEarth offers a Cloud Robotics infrastructure. RoboEarth's World-Wide-Web style database stores knowledge generated by humans – and robots – in a machine-readable format. Data stored in the RoboEarth knowledge base include software components, maps for navigation (e.g., object locations, world models), task knowledge (e.g., action recipes, manipulation strategies), and object recognition models (e.g., images, object models). The RoboEarth Cloud Engine includes support for mobile robots, autonomous vehicles, and drones, which require much computation for navigation. Rapyuta is an open source cloud robotics framework based on RoboEarth Engine developed by the robotics researcher at ETHZ. Within the framework, each robot connected to Rapyuta can have a secured computing environment (rectangular boxes) giving them the ability to move their heavy computation into the cloud. In addition, the computing environments are tightly interconnected with each other and have a high bandwidth connection to the RoboEarth knowledge repository. FogROS2 is an open-source extension to the Robot Operating System 2 (ROS 2) developed by researchers at UC Berkeley. It enables robots to offload computationally intensive tasks—such as SLAM, grasp planning, and motion planning—to cloud resources, thereby enhancing performance and reducing onboard computational requirements. FogROS2 automates the provisioning of cloud instances, deployment of ROS 2 nodes, and secure communication between robots and cloud services. The platform is designed to be compatible with existing ROS 2 applications without requiring code modifications. Further advancements include FogROS2-SGC, which facilitates secure global connectivity across different networks and locations, and FogROS2-FT, which introduces fault tolerance by replicating services across multiple cloud providers to ensure robustness against failures. KnowRob is an extensional project of RoboEarth. It is a knowledge processing system that combines knowledge representation and reasoning methods with techniques for acquiring knowledge and for grounding the knowledge in a physical system and can serve as a common semantic framework for integrating information from different sources. RoboBrain is a large-scale computational system that learns from publicly available Internet resources, computer simulations, and real-life robot trials. It accumulates everything robotics into a comprehensive and interconnected knowledge base. Applications include prototyping for robotics research, household robots, and self-driving cars. The goal is as direct as the project's name—to create a centralised, always-online brain for robots to tap into. The project is dominated by Stanford University and Cornell University. And the project is supported by the National Science Foundation, the Office of Naval Research, the Army Research Office, Google, Microsoft, Qualcomm, the Alfred P. Sloan Foundation and the National Robotics Initiative, whose goal is to advance robotics to help make the United States more competitive in the world economy. MyRobots is a service for connecting robots and intelligent devices to the Internet. It can be regarded as a social network for robots and smart objects (i.e. Facebook for robots). With socialising, collaborating and sharing, robots can benefit from those interactions too by sharing their sensor information giving insight on their perspective of their current state. COALAS is funded by the INTERREG IVA France (Channel) – England European cross-border co-operation programme. The project aims to develop new technologies for disabled people through social and technological innovation and through the users' social and psychological integrity. The objective is to produce a cognitive ambient
AI safety
AI safety is an interdisciplinary field focused on preventing accidents, misuse, or other harmful consequences arising from artificial intelligence systems. It encompasses AI alignment (which aims to ensure AI systems behave as intended), monitoring AI systems for risks, and enhancing their robustness. The field is particularly concerned with existential risks posed by advanced AI models. Beyond technical research, AI safety involves developing norms and policies that promote safety, including advocacy for regulations at different levels of government. The field gained significant popularity in 2023, with rapid progress in generative AI and public concerns voiced by researchers and CEOs about potential dangers. During the 2023 AI Safety Summit, the United States and the United Kingdom both established their own AI Safety Institute. However, researchers have expressed concern that AI safety measures are not keeping pace with the rapid development of AI capabilities. == Motivations == Scholars discuss current risks from critical systems failures, bias, and AI-enabled surveillance, as well as emerging risks like technological unemployment, digital manipulation, weaponization, AI-enabled cyberattacks and bioterrorism. They also discuss speculative risks from losing control of future artificial general intelligence (AGI) agents, or from AI enabling perpetually stable dictatorships. === Existential safety === Some have criticized concerns about AGI, such as Andrew Ng who compared them in 2015 to "worrying about overpopulation on Mars when we have not even set foot on the planet yet". Stuart J. Russell on the other side urges caution, arguing that "it is better to anticipate human ingenuity than to underestimate it". AI researchers have widely differing opinions about the severity and primary sources of risk posed by AI technology – though surveys suggest that experts take high consequence risks seriously. In two surveys of AI researchers, the median respondent was optimistic about AI overall, but placed a 5% probability on an "extremely bad (e.g. human extinction)" outcome of advanced AI. In a 2022 survey of the natural language processing community, 37% agreed or weakly agreed that it is plausible that AI decisions could lead to a catastrophe that is "at least as bad as an all-out nuclear war". == History == Risks from AI began to be seriously discussed at the start of the computer age: Moreover, if we move in the direction of making machines which learn and whose behavior is modified by experience, we must face the fact that every degree of independence we give the machine is a degree of possible defiance of our wishes. In 1988 Blay Whitby published a book outlining the need for AI to be developed along ethical and socially responsible lines. From 2008 to 2009, the Association for the Advancement of Artificial Intelligence (AAAI) commissioned a study to explore and address potential long-term societal influences of AI research and development. The panel was generally skeptical of the radical views expressed by science-fiction authors but agreed that "additional research would be valuable on methods for understanding and verifying the range of behaviors of complex computational systems to minimize unexpected outcomes". In 2011, Roman Yampolskiy introduced the term "AI safety engineering" at the Philosophy and Theory of Artificial Intelligence conference, listing prior failures of AI systems and arguing that "the frequency and seriousness of such events will steadily increase as AIs become more capable". In 2014, philosopher Nick Bostrom published the book Superintelligence: Paths, Dangers, Strategies. He has the opinion that the rise of AGI has the potential to create various societal issues, ranging from the displacement of the workforce by AI, manipulation of political and military structures, to even the possibility of human extinction. His argument that future advanced systems may pose a threat to human existence prompted Elon Musk, Bill Gates, and Stephen Hawking to voice similar concerns. In 2015, dozens of artificial intelligence experts signed an open letter on artificial intelligence calling for research on the societal impacts of AI and outlining concrete directions. To date, the letter has been signed by over 8000 people including Yann LeCun, Shane Legg, Yoshua Bengio, and Stuart Russell. In the same year, a group of academics led by professor Stuart J. Russell founded the Center for Human-Compatible AI at the University of California Berkeley and the Future of Life Institute awarded $6.5 million in grants for research aimed at "ensuring artificial intelligence (AI) remains safe, ethical and beneficial". In 2016, the White House Office of Science and Technology Policy and Carnegie Mellon University announced The Public Workshop on Safety and Control for Artificial Intelligence, which was one of a sequence of four White House workshops aimed at investigating "the advantages and drawbacks" of AI. In the same year, Concrete Problems in AI Safety – one of the first and most influential technical AI Safety agendas – was published. In 2017, the Future of Life Institute sponsored the Asilomar Conference on Beneficial AI, where more than 100 thought leaders formulated principles for beneficial AI including "Race Avoidance: Teams developing AI systems should actively cooperate to avoid corner-cutting on safety standards". In 2018, the DeepMind Safety team outlined AI safety problems in specification, robustness, and assurance. The following year, researchers organized a workshop at ICLR that focused on these problem areas. In 2021, Unsolved Problems in ML Safety was published, outlining research directions in robustness, monitoring, alignment, and systemic safety. In 2023, Rishi Sunak said he wants the United Kingdom to be the "geographical home of global AI safety regulation" and to host the first global summit on AI safety. The AI safety summit took place in November 2023, and focused on the risks of misuse and loss of control associated with frontier AI models. During the summit the intention to create the International Scientific Report on the Safety of Advanced AI was announced. In 2024, The US and UK forged a new partnership on the science of AI safety. The MoU was signed on 1 April 2024 by US commerce secretary Gina Raimondo and UK technology secretary Michelle Donelan to jointly develop advanced AI model testing, following commitments announced at an AI Safety Summit in Bletchley Park in November. In 2025, an international team of 96 experts chaired by Yoshua Bengio published the first International AI Safety Report. The report, commissioned by 30 nations and the United Nations, represents the first global scientific review of potential risks associated with advanced artificial intelligence. It details potential threats stemming from misuse, malfunction, and societal disruption, with the objective of informing policy through evidence-based findings, without providing specific recommendations. == Research focus == AI safety research areas include robustness, monitoring, and alignment. === Robustness === ==== Adversarial robustness ==== AI systems are often vulnerable to adversarial examples or "inputs to machine learning (ML) models that an attacker has intentionally designed to cause the model to make a mistake". For example, in 2013, Szegedy et al. discovered that adding specific imperceptible perturbations to an image could cause it to be misclassified with high confidence. This continues to be an issue with neural networks, though in recent work the perturbations are generally large enough to be perceptible. The image on the right is predicted to be an ostrich after the perturbation is applied. (Left) is a correctly predicted sample, (center) perturbation applied magnified by 10x, (right) adversarial example. Adversarial robustness is often associated with security. Researchers demonstrated that an audio signal could be imperceptibly modified so that speech-to-text systems transcribe it to any message the attacker chooses. Network intrusion and malware detection systems also must be adversarially robust since attackers may design their attacks to fool detectors. Models that represent objectives (reward models) must also be adversarially robust. For example, a reward model might estimate how helpful a text response is and a language model might be trained to maximize this score. Researchers have shown that if a language model is trained for long enough, it will leverage the vulnerabilities of the reward model to achieve a better score and perform worse on the intended task. This issue can be addressed by improving the adversarial robustness of the reward model. More generally, any AI system used to evaluate another AI system must be adversarially robust. This could include monitoring tools, since they could also potentially be tampered with to produce a higher reward. Large language models (LLMs) can be vulnerable to prom