Five safes

The Five Safes is a framework for helping make decisions about making effective use of data which is confidential or sensitive. It is mainly used to describe or design research access to statistical data held by government and health agencies, and by data archives such as the UK Data Service. It is not an internationally accepted standard. Two of the Five Safes refer to statistical disclosure control, and so the Five Safes is usually used to contrast statistical and non-statistical controls when comparing data management options. == Concept == The Five Safes proposes that data management decisions be considered as solving problems in five 'dimensions': projects, people, settings, data and outputs. The combination of the controls leads to 'safe use'. These are most commonly expressed as questions, for example: These dimensions are scales, not limits. That is, solutions can have a mix of more or fewer controls in each dimension, but the overall aim of 'safe use' independent of the particular mix. For example, a public use file available for open download cannot control who uses it, where or for what purpose, and so all the control (protection) must be in the data itself. In contrast, a file which is only accessed through a secure environment with certified users can contain very sensitive information: the non-statistical controls allow the data to be 'unsafe'. One academic likened the process to a graphic equalizer, where bass and treble can be combined independently to produce a sound the listener likes, which has proven to be a very useful metaphor. This 2023 Data Foundation webinar is an expert discussion of how the elements interact, including an excellent introductory representation. There is no 'order' to the Five Safes, in that one is necessarily more important than the others. However, Ritchie argued that the 'managerial' controls (projects, people, setting) should be addressed before the 'statistical' controls (data, output). The Five Safes concept is associated with other topics which developed from the same programme at ONS, although these are not necessarily implemented. Safe people is associated with 'active researcher management', while safe outputs is linked with principles-based output statistical disclosure control. The Five Safes is a positive framework, describing what is and is not. The EDRU ('evidence-based, default-open, risk-managed, user-centred') attitudinal model is sometimes used to give a normative context == The 'data access spectrum' == From 2003 the Five Safes was also represented in a simpler form as a 'Data Access Spectrum'. The non-data controls (project, people, setting, outputs) tend to work together, in that organisations often see these as a complementary set of restrictions on access. These can then be contrasted with choices about data anonymisation to present a linear representation of data access options. This presentation is consistent with the idea of 'data as a residual', as well as data protection laws of the time which often characterised data simply as anonymous or not anonymous. A similar idea had already been developed independently in 2001 by Chuck Humphrey of the Canadian RDC network, the 'continuum of access'. More recently, The Open Data Institute has developed a 'Data Spectrum toolkit' which includes industry-specific examples. == History and terminology == The Five Safes was devised in the winter of 2002/2003 by Felix Ritchie at the UK Office for National Statistics (ONS) to describe its secure remote-access Virtual Microdata Laboratory (VML). It was described at this time as the 'VML Security Model'. This was adopted by the NORC data enclave, and more widely in the US, as the 'portfolio model' (although this is now also used to refer to a slightly different legal/statistical/educational breakdown). In 2012 the framework as was still being referred to as the 'VML security model', but its increasing use among non-UK organisations led to the adoption of the more general and informative phrase 'Five Safes'. The original framework only had four safes (projects, people, settings and outputs): the framework was used to describe highly detailed data access through a secure environment, and so the 'data' dimension was irrelevant. From 2007 onwards, 'safe data' was included as the framework was used to a describe a wider range of ONS activities. As the US version was based upon the 2005 specification, some US iterations uses have the original four dimensions (eg). Some discussions, such as the OECD, use the term 'secure' instead 'safe'. However, the use of both these terms can cause presentational problems: less control in a particular dimension could be seen to imply 'unsafe users' or 'insecure settings', for example, which distracts from the main message. Hence, the Australian government uses the term "five data sharing principles". The 'Anonymisation Decision-Making Framework' uses a framework based on the Five Safes but relabelling "projects", "people", and "settings" as "governance", "agency" and "infrastructure", respectively; "Output" is omitted, and "safe use" becomes "functional anonymisation". There is no reference to the Five Safes or any associated literature. The Australian version was required to include references to the Five Safes, and presented it as an alternative without comment. == Application == The framework has had three uses: pedagogical, descriptive, and design. Since 2016, it has also been used, directly and indirectly in legislation. See for more detailed examples. === Pedagogy === The first significant use of the framework, other than internal administrative use, was to structure researcher training courses at the UK Office for National Statistics from 2003. UK Data Archive, Administrative Data Research Network, Eurostat, Statistics New Zealand, the Mexican National Institute of Statistics and Geography, NORC, Statistics Canada and the Australian Bureau of Statistics, amongst others, have also used this framework. Most of these courses are for researchers using restricted-access facilities; the Eurostat courses are unusual in that they are designed for all users of sensitive data. === Description === The framework is often used to describe existing data access solutions (e.g. UK HMRC Data Lab, UK Data Service, Statistics New Zealand) or planned/conceptualised ones (e.g. Eurostat in 2011). An early use was to help identify areas where ONS' still had 'irreducible risks' in its provision of secure remote access. The framework is mostly used for confidential social science data. To date it appears to have made little impact on medical research planning, although it is now included in the revised guidelines on implementing HIPAA regulations in the US, and by Cancer Research UK and the Health Foundation in the UK. It has also been used to describe a security model for the Scottish Health Informatics Programme. === Design === In general the Five Safes has been used to describe solutions post-factum, and to explain/justify choices made, but an increasing number of organisations have used the framework to design data access solutions. For example, the Hellenic Statistical Agency developed a data strategy built around the Five Safes in 2016; the UK Health Foundation used the Five Safes to design its data management and training programmes. Use in the private sector is less common but some organisations have incorporated the Five Safes into consulting services. In 2015 the UK Data Service organized a workshop to encourage data users from the academic and private sectors to think about how to manage confidential research data, using the Five Safes to demonstrate alternative options and best practice. Early adopters for strategic design use were in Australia: both the Australian Bureau of Statistics and the Australian Department of Social Service used the Five Safes as an ex ante design tool. In 2017 the Australian Productivity Commission recommended adopting a version of the framework to support cross-government data sharing and re-use. This underwent extensive consultation and culminated in the DAT Act 2022. Since 2020 the Five Safes has been the overriding framework for the design of new secure facilities and data sharing arrangements in the UK for public health and social sciences. This has been promoted by the Office for Statistics Regulation, the UK Statistics Authority, NHS DIgital, and the research funding bodies Administrative Data Research UK and DARE UK. === Regulation and legislation === Three laws have incorporated the Fives Safes. They are explicit in the South Australian Public Sector (Data Sharing) Act 2016, and implicit in the research provisions of the UK Digital Economy Act 2017. The Australian Data Availability and Transparency Act 2022 renames the Five Safes as the Five Data Sharing Principles.A 2025 statutory review of the DAT Act 2022 found "that the DAT Act has not been effective in achieving its objectives.". The review includes specific referen

Webull

Webull Corporation, often stylized as simply Webull, is a U.S.-based financial services holding company headquartered in St. Petersburg, Florida. It owns and operates the Webull electronic trading platform for self-directed retail investors. Depending on jurisdiction, the Webull platform offers trading in stocks, exchange-traded funds (ETFs), options, margin, bonds, cryptocurrency and futures, as well as market-data tools. Webull began operations in 2016 under Hunan Fumi Information Technology, a China-based financial technology company founded by Wang Anquan. It launched U.S. brokerage services through Webull Financial LLC in 2018 and expanded during the retail-trading boom of 2020 and 2021. In April 2025, Webull became a publicly traded company on the Nasdaq through a merger with special-purpose acquisition company SK Growth Opportunities Corporation. The company's U.S. brokerage revenue relies substantially on payment for order flow, with options trading accounting for the larger share of its order-flow rebates in 2025. Webull has faced regulatory actions related to options customer approvals, complaint handling, suspicious activity reporting, social-media marketing and customer disclosures. It has also faced scrutiny from U.S. lawmakers and state officials over its historical and operational ties to China and the handling of U.S. customer data. == History == === Founding === Webull was founded in 2016 under Hunan Fumi Information Technology, a China-based financial technology company, by Wang Anquan, a former employee of Alibaba Group and Xiaomi. Hunan Fumi Information Technology received backing from Xiaomi, Shunwei Capital, and other investors in China. Fumi Technology was a Hunan-based fintech start-up incubated by Xiaomi and raised about CNY200 million (approximately US$30 million) in a Series B financing round in 2018. On May 24, 2017, Webull Financial LLC was established as a Delaware limited liability company. It began offering brokerage services in the United States in May 2018. Wang hired Anthony Denier as CEO of the U.S. brokerage that year and the two mapped out their strategy on napkins at a Mexican restaurant in New York City. Webull Corporation was incorporated in the Cayman Islands in September 2019 as the group's holding company. === Retail trading boom === In May 2020, the company received SEC approval to launch a robo-advisor on its platform. By August 2020, the platform had over 11 million registered users, and in October 2020, it had 750,000 daily active users. Webull introduced options trading in 2020 and later added cryptocurrency trading through a separate digital-asset business. In November 2020, Webull began supporting cryptocurrency transactions. In December 2020, Webull launched trading services in Hong Kong. During the GameStop short squeeze in January 2021, Webull gained attention as some retail traders looked for alternatives to Robinhood. On January 27, 2021, Webull recorded its highest-ever number of active daily users, at 952,000, and the Webull app was downloaded across the Apple App and Google Play stores an estimated 100,000 times. That week, approximately 1.2 million people downloaded the Webull mobile app, which the company reported as a 1,548% week-over-week increase. On January 28, 2021, Webull was directed by its clearing house to temporarily halt buy orders for stocks affected by the GameStop short squeeze. In June 2021, Webull was reported to be considering a U.S. initial public offering that could raise up to $400 million. === Restructuring and expansion === Webull restructured its China-related corporate arrangements in 2022 and later stated that Hunan Fumi was no longer affiliated with the group. In 2022 and 2023, Webull expanded in several non-U.S. markets, including Singapore, Australia, South Africa, Japan, the United Kingdom and Indonesia. In June 2023, Webull moved cryptocurrency trading to a separate app called Webull Pay. By the end of 2023, Webull had 4.3 million funded accounts and US$8.2 billion in customer assets. In January 2024, Anthony Denier was promoted to group president of Webull Corporation. In November 2024, Webull launched overnight, or extended-hours, trading, expanding the trading window of U.S. stocks for users inside and outside the United States. === SPAC merger and Nasdaq listing === On February 28, 2024, Webull agreed to go public through a business combination with SK Growth Opportunities Corporation (NASDAQ: SKGR), a special-purpose acquisition company, in a deal that valued the company at approximately US$7.3 billion. The proposed valuation drew scrutiny because of Webull's limited financial disclosure at announcement, reliance on payment for order flow and small expected public float. SK Growth shareholders approved the business combination on March 30, 2025, and the transaction closed on April 10, 2025. Webull's Class A ordinary shares and warrants began trading on the Nasdaq on April 11, 2025 under the ticker symbols BULL and BULLW (incentive warrants traded under BULLZ until their redemption in June 2025). The merger brought Webull to the public market but generated little cash for the company: after shareholder redemptions, Webull disclosed net proceeds of US$430,066 from the transaction. After the listing, Webull's shares experienced extreme volatility, rising as much as 500% to US$79.56 on April 14, 2025, after closing at US$13.25 on the prior trading day. The initial post-listing surge increased the value of Webull holdings owned by earlier investors, including RIT Capital Partners, which had first invested in Webull in 2021. In April 2026, after Webull's shares had fallen about 70% over the previous year, the company authorized a US$100 million share repurchase program. == Business model and financials == Webull provides a self-directed electronic trading platform available through mobile, desktop and web applications. Depending on jurisdiction, the platform offers trading in stocks, exchange-traded funds, options, margin, futures, fixed income products, cryptocurrency, cash management features and market data tools. In the United States, Webull Financial LLC is a registered broker-dealer and member of FINRA and the Securities Investor Protection Corporation, while Webull operates in other markets through locally licensed brokerage subsidiaries. Webull operates a commission-free or low-cost brokerage model for self-directed retail investors. In the United States, a substantial part of its trading-related revenue comes from payment for order flow, while in some non-U.S. markets the company more commonly charges commissions directly to customers. The platform is aimed at more active retail investors, including users seeking options tools, extended-hours trading and real-time market data. For 2025, Webull reported total revenue of US$571.0 million, up from US$390.2 million in 2024. Equity and option order-flow rebates accounted for US$304.1 million, or 53.3% of revenue, making order-flow rebates the company's largest reported revenue category. Interest-related income accounted for US$154.3 million, handling charge income for US$87.3 million and other revenue for US$25.3 million. Options were the larger component of the company's order-flow rebates in 2025, generating US$210.0 million compared with US$94.2 million from equities. Webull also generates revenue from interest-related activities, including margin financing, customer bank deposits, stock lending and corporate bank deposits. The company has stated that its interest-related income is affected by interest rates, customer cash balances, margin balances and demand for stock lending. The company had approximately 20 million registered users worldwide as of February 2024. As of December 31, 2025, it reported 26.8 million registered users, 5.0 million funded accounts and US$24.6 billion in customer assets. As of March 2025, Webull operated in Hong Kong, Singapore, Australia, South Africa, Japan, the United Kingdom, the United States, Indonesia, Canada, Brazil, Thailand, Malaysia and Mexico. == Marketing and sponsorships == Webull has used paid digital advertising, referral incentives, free-stock promotions, affiliate marketing and sports sponsorships to acquire customers and promote its brand. In its 2025 annual filing, the company reported marketing and branding expenses of US$152.3 million in 2023, US$138.7 million in 2024 and US$135.9 million in 2025. Webull said most of its advertising and promotion costs were related to paid search and paid social advertising, and that it had reduced free-stock promotions while shifting toward deposit- and asset-transfer-based incentives. In September 2021, BSE Global, the parent company of the Brooklyn Nets and New York Liberty, entered into a global multi-year agreement with Webull. Under the agreement, Webull became an official sponsor and online brokerage partner of the teams, with branding that included a jersey patch on Brooklyn Nets uniforms. Spo

Affinity (software)

Affinity is a graphics editor developed by Serif, a subsidiary of Canva. It is simultaneously a vector graphics editor, a raster graphics editor and a desktop publishing application. It was first released in 2025 as a successor to Serif's Affinity Designer, Affinity Photo and Affinity Publisher, uniting the three editors into one application. While the previous versions competed individually against Adobe's Illustrator, Photoshop, and InDesign, Affinity 3.0 integrates their functionality into a single application. It uses a freemium model monetized by AI features exclusive to Canva Pro subscribers. == Functionality == Affinity is divided into a number of workspaces ("studios"), which are equivalent to the previous suite of Affinity applications: "vector" for vector graphics (Designer), "pixel" for raster editing (Photo), and "layout" for desktop publishing (Publisher). Additionally, it introduces the ability to create custom workspaces. The application supports real-time previews and non-destructive editing, which are based on GPU acceleration. Supported file formats include Adobe Photoshop, InDesign and Illustrator files, PDF, SVG, and TIFF, as well as a custom .af file format. === Vector editing === === Raster editing === Affinity includes photo editing tools including adjustments, masks, blend modes, batch processing, and retouching facilities. Additionally, the application can develop RAW files, similar to Adobe Lightroom. === Desktop publishing === Publishing features include master pages, text styles, and advanced typography. === AI features === The application supports Canva's existing AI features, such as background removal and generative fill. This requires a Canva subscription. == Development == === Background and acquisition (2014–2024) === Serif launched the original Affinity suite starting with Affinity Designer in 2014, followed by Photo (2015) and Publisher (2019). The software gained popularity for its one-time purchase model, contrasting with Adobe's subscription-based Creative Cloud. In November 2022, Serif released Version 2 of the suite, introducing a "Universal License" that covered all three apps across all platforms. In March 2024, Canva acquired Serif for approximately A$580 million (£300 million). Following user backlash regarding a potential shift to subscriptions, Canva and Serif issued a joint "Pledge" committing to four key principles: fair pricing, no mandatory subscriptions, perpetual licenses for existing products, and continued development of Affinity as a standalone suite. === Unified release (2025) === In September 2025, Serif pulled all existing versions of Affinity Designer, Affinity Photo and Affinity Publisher from sale ahead an upcoming announcement on 30 October; also ahead of the announcement, the iPadOS versions of the Affinity suite became free on App Store. During a "Creative Freedom" keynote on 30 October 2025, Canva released a new version now simply branded as "Affinity" (also known as "Affinity by Canva"), and referred to internally as version 3.0. Version 3 drops the separate applications and integrates their functionality into a singular application, and adds the ability to export directly to the Canva platform. It also adds a Canva AI studio, including background removal, "Expand & Edit", and generative fill. As of version 3, Affinity has switched to a freemium model; it is now available at no charge to users, although access to Canva AI features are locked behind the existing Canva Pro subscription service. Serif stated that the perpetually-licensed version 2 will remain available to existing owners, although it will no longer be actively maintained. The new version is currently available for macOS and Windows only, with an iPadOS version to be released soon. == Reception == The change in business model by Canva in 2025 was met with mixed reception, including concerns about its incorporation of AI features. Some users were concerned that their projects would be used for machine learning purposes, or that future versions would suffer from a lack of maintenance or become adware. Additionally, some felt it turned Affinity into fundamentally subscription-based software, given the prevalence of these features in professional contexts. Affinity publicly stated on social media that it would remain "free forever", users' projects would not be used to train AI models, and that "Canva has built a sustainable business model that allows this kind of generosity. And when more professionals use Affinity, Canva can sell more seats into businesses."

PhotoLine

PhotoLine is a general purpose bitmap and vector graphics editor developed and published by Computerinsel GmbH for Windows, macOS, and Linux/Wine. It was originally created in 1995 by Gerhard Huber and Martin Huber. The program combines bitmap and vector graphics editing in one seamless working application unlike most graphics software which tend to focus on either bitmap or vector editing and output. PhotoLine is considered as a market competitor to Adobe Photoshop. == Features == PhotoLine edits and composes multi-layer raster and vector images with deep support for masking and alpha compositing and with full color management. Editing and color management in PhotoLine is mostly non-destructive. Image data in layers is preserved without loss of information regardless of the document's image mode or layer transformation. color depth, image resolution, color model, and ICC profile are preserved for each individual layer or group of layers. Layers can be cloned and reused anywhere in the layer stack, including repurposed as layer masks. Layer blending and compositing in PhotoLine supports common blend modes, and features a layer blend range of -200 to +200 percent. It is also possible to control which channels are blended for each layer, adjustment layer, and layer mask or group of layers. Filters, adjustment layers, and brushes have access to Lab and HIS color modes (HIS is a variant of HSL), separately of the color model of the underlying image layer. In Addition to raster and vector editing, PhotoLine can be used for small desktop publishing projects. Multi-page documents with page spreads and text flow between text frames and pages are supported. Character and paragraph styles can be defined. Spot colors, bleed settings, a baseline grid, a table of contents generator, and PDF/X support help with these projects. PhotoLine is however much more limited when compared to dedicated publishing software such as Adobe InDesign or QuarkXPress. PhotoLine incorporates the Open-source software library LibRaw to read raw images from digital cameras for import. Developing these files is non-destructive with a choice of embedding the RAW image data either in the PhotoLine document or link to the external RAW image file. PhotoLine can open raw files as linear unmodified and non color managed source images. Photoshop PSD files can be imported and exported. Core functionality of PhotoLine can be extended through standard Photoshop filter plugins, the G'MIC digital image processing framework, and PSP tubes. External programs can be linked for a seamless round-trip workflow and files can be sent directly for processing in third-party design applications. Custom functionality is further supported through scripting and macro recording. == Early history == Developed by two brothers, Gerhard Huber and Martin Huber, PhotoLine was first released in January 1996 on the Atari ST line of personal computers from Atari Corporation. Previously, Gerhard and Martin had worked on making graphics cards for Atari computers and writing drivers for image scanners. Atari's market share was declining, and the brothers considered developing a video game to expand the business. This led them to search for image editing software that would run on Atari computers and fit their game project. Only an image editor called tms Cranach came close to what Gerhard and Martin had in mind. tms Cranach was a Raster graphics editor running on Atari's MegaST/STe, TT030, and Falcon030 systems. However, Cranach turned out to be expensive software and complicated to use. The brothers contacted tms (Cranach's developers) and this resulted in an offer from tms to purchase Cranach and its source code, as tms intended to exit the Atari software market. After the purchase of Cranach and its source code Gerhard and Martin initially continued to sell Cranach, but sales were low. In 1995 the two decided to start developing a new graphics editor called "PhotoLine". PhotoLine was developed from scratch and written in C++. It nevertheless contained a lot of know-how from Cranach (which was written in C). PhotoLine first release was launched one year later in 1996. With the growing popularity of Microsoft Windows, the release of Windows 95, and the limiting graphics hardware on the Atari platforms, the developers switched development platforms and continued development of PhotoLine for Windows only. The first Windows version (PhotoLine 2.2) was released in the middle of 1997. Shortly after, the Atari version was discontinued and saw its final release as PhotoLine 2.30. The Huber brothers released this final Atari version into the public domain in 2012. The first Classic Mac OS version of PhotoLine 6 appeared in 1999 after many ex-Atari users who had switched to Mac OS pressured the PhotoLine developers to release an Apple port. == Linux Support == PhotoLine runs natively under Windows and MacOS. While a native Linux version of PhotoLine is not available, running PhotoLine under Wine is actively supported and maintained by the developers. Running PhotoLine under Linux/Wine PhotoLine enables the user to allow Little CMS to fully support color management under Linux instead of the native OS CMS. == File format == Native PhotoLine files have the extension .PLD, which is an abbreviation of "PhotoLine Document". It can contain embedded JPEG, PNG, or camera raw images. It contains a preview image in JPEG or PNG format, which is used by the operating system or third-party applications to display a thumbnail of its contents. Thumbnails are natively supported on MacOS X. During installation on Windows the user is presented with an option to install a PLD thumbnail preview driver which enables thumbnails of PLD content in Windows Explorer. Alternatively, the FastPictureViewer Standalone Codec Pack provides the ability to display PLD thumbnails in Windows Explorer. == Version History == PhotoLine was first developed for the Atari ST computer. Version 2 was the first version for Windows, and since version 6 PhotoLine is also available for MacOS.

Distribution management system

A distribution management system (DMS) is a collection of applications designed to monitor and control the electric power distribution networks efficiently and reliably. It acts as a decision support system to assist the control room and field operating personnel with the monitoring and control of the electric distribution system. Improving the reliability and quality of service in terms of reducing power outages, minimizing outage time, maintaining acceptable frequency and voltage levels are the key deliverables of a DMS. Given the complexity of distribution grids, such systems may involve communication and coordination across multiple components. For example, the control of active loads may require a complex chain of communication through different components as described in US patent 11747849B2 In recent years, utilization of electrical energy increased exponentially and customer requirement and quality definitions of power were changed enormously. As electric energy became an essential part of daily life, its optimal usage and reliability became important. Real-time network view and dynamic decisions have become instrumental for optimizing resources and managing demands, leading to the need for distribution management systems in large-scale electrical networks. == Overview == Most distribution utilities have been comprehensively using IT solutions through their Outage Management System (OMS) that makes use of other systems like Customer Information System (CIS), Geographical Information System (GIS) and Interactive Voice Response System (IVRS). An outage management system has a network component/connectivity model of the distribution system. By combining the locations of outage calls from customers with knowledge of the locations of the protection devices (such as circuit breakers) on the network, a rule engine is used to predict the locations of outages. Based on this, restoration activities are charted out and the crew is dispatched for the same. In parallel with this, distribution utilities began to roll out Supervisory Control and Data Acquisition (SCADA) systems, initially only at their higher voltage substations. Over time, use of SCADA has progressively extended downwards to sites at lower voltage levels. DMSs access real-time data and provide all information on a single console at the control centre in an integrated manner. Their development varied across different geographic territories. In the US, for example, DMSs typically grew by taking Outage Management Systems to the next level, automating the complete sequences and providing an end to end, integrated view of the entire distribution spectrum. In the UK, by contrast, the much denser and more meshed network topologies, combined with stronger Health & Safety regulation, had led to early centralisation of high-voltage switching operations, initially using paper records and schematic diagrams printed onto large wallboards which were 'dressed' with magnetic symbols to show the current running states. There, DMSs grew initially from SCADA systems as these were expanded to allow these centralised control and safety management procedures to be managed electronically. These DMSs required even more detailed component/connectivity models and schematics than those needed by early OMSs as every possible isolation and earthing point on the networks had to be included. In territories such as the UK, therefore, the network component/connectivity models were usually developed in the DMS first, whereas in the USA these were generally built in the GIS. The typical data flow in a DMS has the SCADA system, the Information Storage & Retrieval (ISR) system, Communication (COM) Servers, Front-End Processors (FEPs) & Field Remote Terminal Units (FRTUs). == Why DMS? == Reduce the duration of outages Improve the speed and accuracy of outage predictions. Reduce crew patrol and drive times through improved outage locating. Improve the operational efficiency Determine the crew resources necessary to achieve restoration objectives. Effectively utilize resources between operating regions. Determine when best to schedule mutual aid crews. Increased customer satisfaction A DMS incorporates IVR and other mobile technologies, through which there is an improved outage communications for customer calls. Provide customers with more accurate estimated restoration times. Improve service reliability by tracking all customers affected by an outage, determining electrical configurations of every device on every feeder, and compiling details about each restoration process. == DMS Functions == In order to support proper decision making and O&M activities, DMS solutions should support the following functions: Network visualization & support tools Applications for Analytical & Remedial Action Utility Planning Tools System Protection Schemes The various sub functions of the same, carried out by the DMS are listed below:- === Network Connectivity Analysis (NCA) === Distribution network usually covers over a large area and catering power to different customers at different voltage levels. So locating required sources and loads on a larger GIS/Operator interface is often very difficult. Panning & zooming provided with normal SCADA system GUI does not cover the exact operational requirement. Network connectivity analysis is an operator specific functionality which helps the operator to identify or locate the preferred network or component very easily. NCA does the required analyses and provides display of the feed point of various network loads. Based on the status of all the switching devices such as circuit breaker (CB), Ring Main Unit (RMU) and/or isolators that affect the topology of the network modeled, the prevailing network topology is determined. The NCA further assists the operator to know operating state of the distribution network indicating radial mode, loops and parallels in the network. === Switching Schedule & Safety Management === In territories such as the UK a core function of a DMS has always been to support safe switching and work on the networks. Control engineers prepare switching schedules to isolate and make safe a section of network before work is carried out, and the DMS validates these schedules using its network model. Switching schedules can combine telecontrolled and manual (on-site) switching operations. When the required section has been made safe, the DMS allows a Permit To Work (PTW) document to be issued. After its cancellation when the work has been finished, the switching schedule then facilitates restoration of the normal running arrangements. Switching components can also be tagged to reflect any Operational Restrictions that are in force. The network component/connectivity model, and associated diagrams, must always be kept absolutely up to date. The switching schedule facility therefore also allows 'patches' to the network model to be applied to the live version at the appropriate stage(s) of the jobs. The term 'patch' is derived from the method previously used to maintain the wallboard diagrams. === State Estimation (SE) === The state estimator is an integral part of the overall monitoring and control systems for transmission networks. It is mainly aimed at providing a reliable estimate of the system voltages. This information from the state estimator flows to control centers and database servers across the network. The variables of interest are indicative of parameters like margins to operating limits, health of equipment and required operator action. State estimators allow the calculation of these variables of interest with high confidence despite the facts that the measurements may be corrupted by noise, or could be missing or inaccurate. Even though we may not be able to directly observe the state, it can be inferred from a scan of measurements which are assumed to be synchronized. The algorithms need to allow for the fact that presence of noise might skew the measurements. In a typical power system, the State is quasi-static. The time constants are sufficiently fast so that system dynamics decay away quickly (with respect to measurement frequency). The system appears to be progressing through a sequence of static states that are driven by various parameters like changes in load profile. The inputs of the state estimator can be given to various applications like Load Flow Analysis, Contingency Analysis, and other applications. === Load Flow Applications (LFA) === Load flow study is an important tool involving numerical analysis applied to a power system. The load flow study usually uses simplified notations like a single-line diagram and focuses on various forms of AC power rather than voltage and current. It analyzes the power systems in normal steady-state operation. The goal of a power flow study is to obtain complete voltage angle and magnitude information for each bus in a power system for specified load and generator real power and voltage conditions. Once this

Matrix regularization

In the field of statistical learning theory, matrix regularization generalizes notions of vector regularization to cases where the object to be learned is a matrix. The purpose of regularization is to enforce conditions, for example sparsity or smoothness, that can produce stable predictive functions. For example, in the more common vector framework, Tikhonov regularization optimizes over min x ‖ A x − y ‖ 2 + λ ‖ x ‖ 2 {\displaystyle \min _{x}\left\|Ax-y\right\|^{2}+\lambda \left\|x\right\|^{2}} to find a vector x {\displaystyle x} that is a stable solution to the regression problem. When the system is described by a matrix rather than a vector, this problem can be written as min X ‖ A X − Y ‖ 2 + λ ‖ X ‖ 2 , {\displaystyle \min _{X}\left\|AX-Y\right\|^{2}+\lambda \left\|X\right\|^{2},} where the vector norm enforcing a regularization penalty on x {\displaystyle x} has been extended to a matrix norm on X {\displaystyle X} . Matrix regularization has applications in matrix completion, multivariate regression, and multi-task learning. Ideas of feature and group selection can also be extended to matrices, and these can be generalized to the nonparametric case of multiple kernel learning. == Basic definition == Consider a matrix W {\displaystyle W} to be learned from a set of examples, S = ( X i t , y i t ) {\displaystyle S=(X_{i}^{t},y_{i}^{t})} , where i {\displaystyle i} goes from 1 {\displaystyle 1} to n {\displaystyle n} , and t {\displaystyle t} goes from 1 {\displaystyle 1} to T {\displaystyle T} . Let each input matrix X i {\displaystyle X_{i}} be ∈ R D T {\displaystyle \in \mathbb {R} ^{DT}} , and let W {\displaystyle W} be of size D × T {\displaystyle D\times T} . A general model for the output y {\displaystyle y} can be posed as y i t = ⟨ W , X i t ⟩ F , {\displaystyle y_{i}^{t}=\left\langle W,X_{i}^{t}\right\rangle _{F},} where the inner product is the Frobenius inner product. For different applications the matrices X i {\displaystyle X_{i}} will have different forms, but for each of these the optimization problem to infer W {\displaystyle W} can be written as min W ∈ H E ( W ) + R ( W ) , {\displaystyle \min _{W\in {\mathcal {H}}}E(W)+R(W),} where E {\displaystyle E} defines the empirical error for a given W {\displaystyle W} , and R ( W ) {\displaystyle R(W)} is a matrix regularization penalty. The function R ( W ) {\displaystyle R(W)} is typically chosen to be convex and is often selected to enforce sparsity (using ℓ 1 {\displaystyle \ell ^{1}} -norms) and/or smoothness (using ℓ 2 {\displaystyle \ell ^{2}} -norms). Finally, W {\displaystyle W} is in the space of matrices H {\displaystyle {\mathcal {H}}} with Frobenius inner product ⟨ … ⟩ F {\displaystyle \langle \dots \rangle _{F}} . == General applications == === Matrix completion === In the problem of matrix completion, the matrix X i t {\displaystyle X_{i}^{t}} takes the form X i t = e t ⊗ e i ′ , {\displaystyle X_{i}^{t}=e_{t}\otimes e_{i}',} where ( e t ) t {\displaystyle (e_{t})_{t}} and ( e i ′ ) i {\displaystyle (e_{i}')_{i}} are the canonical basis in R T {\displaystyle \mathbb {R} ^{T}} and R D {\displaystyle \mathbb {R} ^{D}} . In this case the role of the Frobenius inner product is to select individual elements w i t {\displaystyle w_{i}^{t}} from the matrix W {\displaystyle W} . Thus, the output y {\displaystyle y} is a sampling of entries from the matrix W {\displaystyle W} . The problem of reconstructing W {\displaystyle W} from a small set of sampled entries is possible only under certain restrictions on the matrix, and these restrictions can be enforced by a regularization function. For example, it might be assumed that W {\displaystyle W} is low-rank, in which case the regularization penalty can take the form of a nuclear norm. R ( W ) = λ ‖ W ‖ ∗ = λ ∑ i | σ i | , {\displaystyle R(W)=\lambda \left\|W\right\|_{}=\lambda \sum _{i}\left|\sigma _{i}\right|,} where σ i {\displaystyle \sigma _{i}} , with i {\displaystyle i} from 1 {\displaystyle 1} to min D , T {\displaystyle \min D,T} , are the singular values of W {\displaystyle W} . === Multivariate regression === Models used in multivariate regression are parameterized by a matrix of coefficients. In the Frobenius inner product above, each matrix X {\displaystyle X} is X i t = e t ⊗ x i {\displaystyle X_{i}^{t}=e_{t}\otimes x_{i}} such that the output of the inner product is the dot product of one row of the input with one column of the coefficient matrix. The familiar form of such models is Y = X W + b {\displaystyle Y=XW+b} Many of the vector norms used in single variable regression can be extended to the multivariate case. One example is the squared Frobenius norm, which can be viewed as an ℓ 2 {\displaystyle \ell ^{2}} -norm acting either entrywise, or on the singular values of the matrix: R ( W ) = λ ‖ W ‖ F 2 = λ ∑ i ∑ j | w i j | 2 = λ Tr ⁡ ( W ∗ W ) = λ ∑ i σ i 2 . {\displaystyle R(W)=\lambda \left\|W\right\|_{F}^{2}=\lambda \sum _{i}\sum _{j}\left|w_{ij}\right|^{2}=\lambda \operatorname {Tr} \left(W^{}W\right)=\lambda \sum _{i}\sigma _{i}^{2}.} In the multivariate case the effect of regularizing with the Frobenius norm is the same as the vector case; very complex models will have larger norms, and, thus, will be penalized more. === Multi-task learning === The setup for multi-task learning is almost the same as the setup for multivariate regression. The primary difference is that the input variables are also indexed by task (columns of Y {\displaystyle Y} ). The representation with the Frobenius inner product is then X i t = e t ⊗ x i t . {\displaystyle X_{i}^{t}=e_{t}\otimes x_{i}^{t}.} The role of matrix regularization in this setting can be the same as in multivariate regression, but matrix norms can also be used to couple learning problems across tasks. In particular, note that for the optimization problem min W ‖ X W − Y ‖ 2 2 + λ ‖ W ‖ 2 2 {\displaystyle \min _{W}\left\|XW-Y\right\|_{2}^{2}+\lambda \left\|W\right\|_{2}^{2}} the solutions corresponding to each column of Y {\displaystyle Y} are decoupled. That is, the same solution can be found by solving the joint problem, or by solving an isolated regression problem for each column. The problems can be coupled by adding an additional regularization penalty on the covariance of solutions min W , Ω ‖ X W − Y ‖ 2 2 + λ 1 ‖ W ‖ 2 2 + λ 2 Tr ⁡ ( W T Ω − 1 W ) {\displaystyle \min _{W,\Omega }\left\|XW-Y\right\|_{2}^{2}+\lambda _{1}\left\|W\right\|_{2}^{2}+\lambda _{2}\operatorname {Tr} \left(W^{T}\Omega ^{-1}W\right)} where Ω {\displaystyle \Omega } models the relationship between tasks. This scheme can be used to both enforce similarity of solutions across tasks, and to learn the specific structure of task similarity by alternating between optimizations of W {\displaystyle W} and Ω {\displaystyle \Omega } . When the relationship between tasks is known to lie on a graph, the Laplacian matrix of the graph can be used to couple the learning problems. == Spectral regularization == Regularization by spectral filtering has been used to find stable solutions to problems such as those discussed above by addressing ill-posed matrix inversions (see for example Filter function for Tikhonov regularization). In many cases the regularization function acts on the input (or kernel) to ensure a bounded inverse by eliminating small singular values, but it can also be useful to have spectral norms that act on the matrix that is to be learned. There are a number of matrix norms that act on the singular values of the matrix. Frequently used examples include the Schatten p-norms, with p = 1 or 2. For example, matrix regularization with a Schatten 1-norm, also called the nuclear norm, can be used to enforce sparsity in the spectrum of a matrix. This has been used in the context of matrix completion when the matrix in question is believed to have a restricted rank. In this case the optimization problem becomes: min ‖ W ‖ ∗ subject to W i , j = Y i j . {\displaystyle \min \left\|W\right\|_{}~~{\text{ subject to }}~~W_{i,j}=Y_{ij}.} Spectral Regularization is also used to enforce a reduced rank coefficient matrix in multivariate regression. In this setting, a reduced rank coefficient matrix can be found by keeping just the top n {\displaystyle n} singular values, but this can be extended to keep any reduced set of singular values and vectors. == Structured sparsity == Sparse optimization has become the focus of much research interest as a way to find solutions that depend on a small number of variables (see e.g. the Lasso method). In principle, entry-wise sparsity can be enforced by penalizing the entry-wise ℓ 0 {\displaystyle \ell ^{0}} -norm of the matrix, but the ℓ 0 {\displaystyle \ell ^{0}} -norm is not convex. In practice this can be implemented by convex relaxation to the ℓ 1 {\displaystyle \ell ^{1}} -norm. While entry-wise regularization with an ℓ 1 {\displaystyle \ell ^{1}} -norm will find solutions with a small number of nonzero elements, applying an ℓ 1 {

BevQ

BevQ is a queue management mobile application developed by Faircode Technologies of Kochi, Kerala. It is provided by the Kerala State Beverages Corporation under Government of Kerala. == History == This app was released together by the Government of Kerala and the Kerala State Beverages Corporation in order to implement social distancing in the liquor stores Kerala in the case of the COVID-19 pandemic in Kerala and to reduce the congestion of people. The BevQ App was released by Faircode Technologies on 27 May 2020 on the Google Play Store. In January 2021, the app was withdrawn as bars had opened. In June 2021, there was a commitment from the Kerala CM that the App will be relaunched again. It has been reported that over 132,000 new users downloaded the app in the 48 hours after the announcement. == Achievements == The BEVQ app, which works only in the state of Kerala, beat all other Indian food and drink apps in 2020 to see the highest growth in year-on-year sessions, according to the State of Mobile 2021 report by App Annie. The app even beat the likes of Domino’s, which is used all across India. Around 300 government Liquor shops and 900 private liquor shops were enlisted in the platform. More than 200 million unique users registered in the platform. About 250,000 tokens were given out a day.