Automation describes a wide range of technologies that reduce human intervention in processes, mainly by predetermining decision criteria, subprocess relationships, and related actions, as well as embodying those predeterminations in machines. Automation has been achieved by various means including mechanical, hydraulic, pneumatic, electrical, electronic devices, and computers, usually in combination. Complicated systems, such as modern factories, airplanes, and ships typically use combinations of all of these techniques. The benefits of automation includes labor savings, reducing waste, savings in electricity costs, savings in material costs, and improvements to quality, accuracy, and precision. Automation includes the use of various equipment and control systems such as machinery, processes in factories, boilers, and heat-treating ovens, switching on telephone networks, steering, stabilization of ships, aircraft and other applications and vehicles with reduced human intervention. Examples range from a household thermostat controlling a boiler to a large industrial control system with tens of thousands of input measurements and output control signals. In the simplest type of an automatic control loop, a controller compares a measured value of a process with a desired set value and processes the resulting error signal to change some input to the process, in such a way that the process stays at its set point despite disturbances. This closed-loop control is an application of negative feedback to a system. The mathematical basis of control theory began in the 18th century and advanced rapidly in the 20th. The term automation, inspired by the earlier word automatic (coming from automaton), was not widely used before 1947, when Ford established an automation department. It was during this time that the industry was rapidly adopting feedback controllers, Technological advancements introduced in the 1930s revolutionized various industries significantly. The World Bank's World Development Report of 2019 shows evidence that the new industries and jobs in the technology sector outweigh the economic effects of workers being displaced by automation. Job losses and downward mobility blamed on automation have been cited as one of many factors in the resurgence of nationalist, protectionist and populist politics in the US, UK and France, among other countries since the 2010s. == History == === Early history === It was a preoccupation of the Greeks and Arabs (in the period between about 300 BC and about 1200 AD) to keep an accurate track of time. In Ptolemaic Egypt, about 270 BC, Ctesibius described a float regulator for a water clock, a device not unlike the ball and cock in a modern flush toilet. This was the earliest feedback-controlled mechanism. The appearance of the mechanical clock in the 14th century made the water clock and its feedback control system obsolete. The Persian Banū Mūsā brothers, in their Book of Ingenious Devices (850 AD), described a number of automatic controls. Two-step level controls for fluids, a form of discontinuous variable structure controls, were developed by the Banu Musa brothers. They also described a feedback controller. The design of feedback control systems up through the Industrial Revolution was by trial-and-error, together with a great deal of engineering intuition. It was not until the mid-19th century that the stability of feedback control systems was analyzed using mathematics, the formal language of automatic control theory. The centrifugal governor was invented by Christiaan Huygens in the seventeenth century, and used to adjust the gap between millstones. === Industrial Revolution in Western Europe === The introduction of prime movers, or self-driven machines advanced grain mills, furnaces, boilers, and the steam engine created a new requirement for automatic control systems including temperature regulators (invented in 1624; see Cornelius Drebbel), pressure regulators (1681), float regulators (1700) and speed control devices. Another control mechanism was used to tent the sails of windmills. It was patented by Edmund Lee in 1745. Also in 1745, Jacques de Vaucanson invented the first automated loom. Around 1800, Joseph Marie Jacquard created a punch-card system to program looms. In 1771 Richard Arkwright invented the first fully automated spinning mill driven by water power, known at the time as the water frame. An automatic flour mill was developed by Oliver Evans in 1785, making it the first completely automated industrial process. A centrifugal governor was used by Mr. Bunce of England in 1784 as part of a model steam crane. The centrifugal governor was adopted by James Watt for use on a steam engine in 1788 after Watt's partner Boulton saw one at a flour mill Boulton & Watt were building. The governor could not actually hold a set speed; the engine would assume a new constant speed in response to load changes. The governor was able to handle smaller variations such as those caused by fluctuating heat load to the boiler. Also, there was a tendency for oscillation whenever there was a speed change. As a consequence, engines equipped with this governor were not suitable for operations requiring constant speed, such as cotton spinning. Several improvements to the governor, plus improvements to valve cut-off timing on the steam engine, made the engine suitable for most industrial uses before the end of the 19th century. Advances in the steam engine stayed well ahead of science, both thermodynamics and control theory. The governor received relatively little scientific attention until James Clerk Maxwell published a paper that established the beginning of a theoretical basis for understanding control theory. === 20th century === Relay logic was introduced with factory electrification, which underwent rapid adaptation from 1900 through the 1920s. Central electric power stations were also undergoing rapid growth and the operation of new high-pressure boilers, steam turbines and electrical substations created a great demand for instruments and controls. Central control rooms became common in the 1920s, but as late as the early 1930s, most process controls were on-off. Operators typically monitored charts drawn by recorders that plotted data from instruments. To make corrections, operators manually opened or closed valves or turned switches on or off. Control rooms also used color-coded lights to send signals to workers in the plant to manually make certain changes. The development of the electronic amplifier during the 1920s, which was important for long-distance telephony, required a higher signal-to-noise ratio, which was solved by negative feedback noise cancellation. This and other telephony applications contributed to the control theory. In the 1940s and 1950s, German mathematician Irmgard Flügge-Lotz developed the theory of discontinuous automatic controls, which found military applications during the Second World War to fire control systems and aircraft navigation systems. Controllers, which were able to make calculated changes in response to deviations from a set point rather than on-off control, began being introduced in the 1930s. Controllers allowed manufacturing to continue showing productivity gains to offset the declining influence of factory electrification. Factory productivity was greatly increased by electrification in the 1920s. U.S. manufacturing productivity growth fell from 5.2%/yr 1919–29 to 2.76%/yr 1929–41. Alexander Field notes that spending on non-medical instruments increased significantly from 1929 to 1933 and remained strong thereafter. The First and Second World Wars saw major advancements in the field of mass communication and signal processing. Other key advances in automatic controls include differential equations, stability theory and system theory (1938), frequency domain analysis (1940), ship control (1950), and stochastic analysis (1941). Starting in 1958, various systems based on solid-state digital logic modules for hard-wired programmed logic controllers (the predecessors of programmable logic controllers [PLC]) emerged to replace electro-mechanical relay logic in industrial control systems for process control and automation, including early Telefunken/AEG Logistat, Siemens Simatic, Philips/Mullard/Valvo Norbit, BBC Sigmatronic, ACEC Logacec, Akkord Estacord, Krone Mibakron, Bistat, Datapac, Norlog, SSR, or Procontic systems. In 1959 Texaco's Port Arthur Refinery became the first chemical plant to use digital control. Conversion of factories to digital control began to spread rapidly in the 1970s as the price of computer hardware fell. === Significant applications === The automatic telephone switchboard was introduced in 1892 along with dial telephones. By 1929, 31.9% of the Bell system was automatic. Automatic telephone switching originally used vacuum tube amplifiers and electro-mechanical switches, which consumed a large amount of electricity. Call volume eve
Multiple buffering
In computer science, multiple buffering is the use of more than one buffer to hold a block of data, so that a "reader" will see a complete (though perhaps old) version of the data instead of a partially updated version of the data being created by a "writer". It is very commonly used for computer display images. It is also used to avoid the need to use dual-ported RAM (DPRAM) when the readers and writers are different devices. == Description == === Double buffering Petri net === The Petri net in the illustration shows double buffering. Transitions W1 and W2 represent writing to buffer 1 and 2 respectively while R1 and R2 represent reading from buffer 1 and 2 respectively. At the beginning, only the transition W1 is enabled. After W1 fires, R1 and W2 are both enabled and can proceed in parallel. When they finish, R2 and W1 proceed in parallel and so on. After the initial transient where W1 fires alone, this system is periodic and the transitions are enabled – always in pairs (R1 with W2 and R2 with W1 respectively). == Double buffering in computer graphics == In computer graphics, double buffering is a technique for drawing graphics that shows less stutter, tearing, and other artifacts. It is difficult for a program to draw a display so that pixels do not change more than once. For instance, when updating a page of text, it is much easier to clear the entire page and then draw the letters than to somehow erase only the pixels that are used in old letters but not in new ones. However, this intermediate image is seen by the user as flickering. In addition, computer monitors constantly redraw the visible video page (traditionally at around 60 times a second), so even a perfect update may be visible momentarily as a horizontal divider between the "new" image and the un-redrawn "old" image, known as tearing. === Software double buffering === A software implementation of double buffering has all drawing operations store their results in some region of system RAM; any such region is often called a "back buffer". When all drawing operations are considered complete, the whole region (or only the changed portion) is copied into the video RAM (the "front buffer"); this copying is usually synchronized with the monitor's raster beam in order to avoid tearing. Software implementations of double buffering necessarily require more memory and CPU time than single buffering because of the system memory allocated for the back buffer, the time for the copy operation, and the time waiting for synchronization. Compositing window managers often combine the "copying" operation with "compositing" used to position windows, transform them with scale or warping effects, and make portions transparent. Thus, the "front buffer" may contain only the composite image seen on the screen, while there is a different "back buffer" for every window containing the non-composited image of the entire window contents. === Page flipping === In the page-flip method, instead of copying the data, both buffers are capable of being displayed. At any one time, one buffer is actively being displayed by the monitor, while the other, background buffer is being drawn. When the background buffer is complete, the roles of the two are switched. The page-flip is typically accomplished by modifying a hardware register in the video display controller—the value of a pointer to the beginning of the display data in the video memory. The page-flip is much faster than copying the data and can guarantee that tearing will not be seen as long as the pages are switched over during the monitor's vertical blanking interval—the blank period when no video data is being drawn. The currently active and visible buffer is called the front buffer, while the background page is called the back buffer. == Triple buffering == In computer graphics, triple buffering is similar to double buffering but can provide improved performance. In double buffering, the program must wait until the finished drawing is copied or swapped before starting the next drawing. This waiting period could be several milliseconds during which neither buffer can be touched. In triple buffering, the program has two back buffers and can immediately start drawing in the one that is not involved in such copying. The third buffer, the front buffer, is read by the graphics card to display the image on the monitor. Once the image has been sent to the monitor, the front buffer is flipped with (or copied from) the back buffer holding the most recent complete image. Since one of the back buffers is always complete, the graphics card never has to wait for the software to complete. Consequently, the software and the graphics card are completely independent and can run at their own pace. Finally, the displayed image was started without waiting for synchronization and thus with minimum lag. Due to the software algorithm not polling the graphics hardware for monitor refresh events, the algorithm may continuously draw additional frames as fast as the hardware can render them. For frames that are completed much faster than interval between refreshes, it is possible to replace a back buffers' frames with newer iterations multiple times before copying. This means frames may be written to the back buffer that are never used at all before being overwritten by successive frames. Nvidia has implemented this method under the name "Fast Sync". An alternative method sometimes referred to as triple buffering is a swap chain three buffers long. After the program has drawn both back buffers, it waits until the first one is placed on the screen, before drawing another back buffer (i.e. it is a 3-long first in, first out queue). Most Windows games seem to refer to this method when enabling triple buffering. == Quad buffering == The term quad buffering is the use of double buffering for each of the left and right eye images in stereoscopic implementations, thus four buffers total (if triple buffering was used then there would be six buffers). The command to swap or copy the buffer typically applies to both pairs at once, so at no time does one eye see an older image than the other eye. Quad buffering requires special support in the graphics card drivers which is disabled for most consumer cards. AMD's Radeon HD 6000 Series and newer support it. 3D standards like OpenGL and Direct3D support quad buffering. == Double buffering for DMA == The term double buffering is used for copying data between two buffers for direct memory access (DMA) transfers, not for enhancing performance, but to meet specific addressing requirements of a device (particularly 32-bit devices on systems with wider addressing provided via Physical Address Extension). Windows device drivers are a place where the term "double buffering" is likely to be used. Linux and BSD source code calls these "bounce buffers". Some programmers try to avoid this kind of double buffering with zero-copy techniques. == Other uses == Double buffering is also used as a technique to facilitate interlacing or deinterlacing of video signals.
Information scientist
The term information scientist developed in the latter part of the twentieth century by Wm. Hovey Smith to describe an individual, usually with a relevant subject degree (such as one in Information and Computer Science - CIS) or high level of subject knowledge, providing focused information to scientific and technical research staff in industry. It is a role quite distinct from and complementary to that of a librarian. Developments in end-user searching, together with some convergence between the roles of librarian and information scientist, have led to a diminution in its use in this context, and the term information officer or information professional (information specialist) are also now used. The term was, and is, also used for an individual carrying out research in information science. Brian C. Vickery mentions that the Institute of Information Scientists (IIS) was established in London during 1958 and lists the criteria put forward by this institute "Criteria for Information Science" (appendix 1) as well as his own "Areas of study in information science" (appendix 2). The IIS merged with the Library Association in 2002 to form the Chartered Institute of Library and Information Professionals (CILIP). == Notable Information Scientists == See also Award of Merit - Association for Information Science and Technology Marcia Bates David Blair (information technologist) Samuel C. Bradford Michael Buckland John M. Carroll Blaise Cronin Emilia Currás Brenda Dervin Eugene Garfield Paul B. Kantor Frederick Wilfrid Lancaster Calvin Mooers Tefko Saracevic Linda C. Smith Robert Saxton Taylor Brian Campbell Vickery Thomas D. Wilson == Additional reading == Ellis, David and Merete Haugan. (1997) "Modelling the information seeking patterns of engineers and research scientists in an industrial environment" (Journal of Documentation, Volume 53(4): pp. 384–403) Poole, Alex H. (2024). "'There's a big difference between going through life with the wind at your back, and going through life leaning into the wind': Feminism in Post-World War II Information Science". Proceedings of the Association for Information Science and Technology. 61: 300–313. doi:10.1002/pra2.1029. Vickery, Brian Campbell (1988) "Essays presented to B. C. Vickery" (Journal of Documentation, Volume 44, pp. 199–283). Vickery, B. & Vickery, A. (1987) Information Science in theory and practice (London: Bowker-Saur, pp. 361–369)
Document
A document is a written, drawn, presented, or memorialized representation of thought, often the manifestation of non-fictional, as well as fictional, content. The etymology of the word "document" derives from the Latin documentum, which denotes a "teaching" or "lesson": the verb doceō denotes "to teach". Historically, the term "document" was usually used to indicate written proof useful as evidence of a truth or fact. In the Computer Age, the term "document" typically refers to a primarily textual computer file, encompassing its structural and format elements, such as fonts, colors, and images. In the contemporary era, the definition of "document" has expanded beyond its traditional medium, such as paper, to encompass electronic documents as well. History, events, examples, opinions, stories, and creativity can all be expressed in documents. "Documentation" is distinct because it has more denotations than "document". Documents are also distinguished from "realia", which are three-dimensional objects that would otherwise satisfy the definition of "document" because they memorialize or represent thought. Documents are usually considered to be two-dimensional representations. == Abstract definitions == The concept of "document" has been defined by Suzanne Briet as "any concrete or symbolic indication, preserved or recorded, for reconstructing or for proving a phenomenon, whether physical or mental." An often-cited article concludes that "the evolving notion of document" among Jonathan Priest, Paul Otlet, Briet, Walter Schürmeyer, and the other documentalists increasingly emphasized whatever functioned as a document rather than traditional physical forms of documents. The shift to digital technology would seem to make this distinction even more important. David M. Levy has said that an emphasis on the technology of digital documents has impeded our understanding of digital documents as documents. A conventional document, such as a mail message or a technical report, exists physically in digital technology as a string of bits, as does everything else in a digital environment. As an object of study, it has been made into a document. It has become physical evidence by those who study it. "Document" is defined in library and information science and documentation science as a fundamental, abstract idea: the word denotes everything that may be represented or memorialized to serve as evidence. The classic example provided by Briet is an antelope: "An antelope running wild on the plains of Africa should not be considered a document[;] she rules. But if it were to be captured, taken to a zoo and made an object of study, it has been made into a document. It has become physical evidence being used by those who study it. Indeed, scholarly articles written about the antelope are secondary documents, since the antelope itself is the primary document." This opinion has been interpreted as an early expression of actor–network theory. == Kinds == A document can be structured, like tabular documents, lists, forms, or scientific charts, semi-structured like a book or a newspaper article, or unstructured like a handwritten note. Documents are sometimes classified as secret, private, or public. They may also be described as drafts or proofs. When a document is copied, the source is denominated the "original". Documents are used in numerous fields, e.g.: Academia: manuscript, thesis, paper, journal, chart, and technical drawing Media: mock-up, script, image, photography, and newspaper article Administration, law, and politics: application, brief, certificate, commission, constitutional document, form, gazette, identity document, license, manifesto, summons, census, and white paper Business: invoice, request for proposal, proposal, contract, packing slip, manifest, report (detailed and summary), spreadsheet, material safety data sheet, waybill, bill of lading, financial statement, nondisclosure agreement (NDA), mutual nondisclosure agreement, and user guide Geography and planning: topographic map, cadastre, legend, and architectural plan Such standard documents can be drafted based on a template. == Drafting == The page layout of a document is how information is graphically arranged in the space of the document, e.g., on a page. If the appearance of the document is of concern, the page layout is generally the responsibility of a graphic designer. Typography concerns the design of letter and symbol forms and their physical arrangement in the document (see typesetting). Information design concerns the effective communication of information, especially in industrial documents and public signs. Simple textual documents may not require visual design and may be drafted only by an author, clerk, or transcriber. Forms may require a visual design for their initial fields, but not to complete the forms. == Media == Traditionally, the medium of a document was paper and the information was applied to it in ink, either by handwriting (to make a manuscript) or by a mechanical process (e.g., a printing press or laser printer). Today, some short documents also may consist of sheets of paper stapled together. Historically, documents were inscribed with ink on papyrus (starting in ancient Egypt) or parchment; scratched as runes or carved on stone using a sharp tool, e.g., the Tablets of Stone described in the Bible; stamped or incised in clay and then baked to make clay tablets, e.g., in the Sumerian and other Mesopotamian civilizations. The papyrus or parchment was often rolled into a scroll or cut into sheets and bound into a codex (book). Contemporary electronic means of memorializing and displaying documents include: Monitor of a desktop computer, laptop, tablet; optionally with a printer to produce a hard copy; Personal digital assistant; Dedicated e-book device; Electronic paper, typically, using the Portable Document Format (PDF); Information appliance; Digital audio player; and Radio and television service provider. Digital documents usually require a specific file format to be presentable in a specific medium. == In law == Documents in all forms frequently serve as material evidence in criminal and civil proceedings. The forensic analysis of such a document is within the scope of questioned document examination. To catalog and manage the large number of documents that may be produced during litigation, Bates numbering is often applied to all documents in the lawsuit so that each document has a unique, arbitrary, identification number.
Sparse identification of non-linear dynamics
Sparse identification of nonlinear dynamics (SINDy) is a data-driven algorithm for obtaining dynamical systems from data. Given a series of snapshots of a dynamical system and its corresponding time derivatives, SINDy performs a sparsity-promoting regression (such as LASSO and sparse Bayesian inference) on a library of nonlinear candidate functions of the snapshots against the derivatives to find the governing equations. This procedure relies on the assumption that most physical systems only have a few dominant terms which dictate the dynamics, given an appropriately selected coordinate system and quality training data. It has been applied to identify the dynamics of fluids, based on proper orthogonal decomposition, as well as other complex dynamical systems, such as biological networks. == Mathematical Overview == First, consider a dynamical system of the form x ˙ = d d t x ( t ) = f ( x ( t ) ) , {\displaystyle {\dot {\textbf {x}}}={\frac {d}{dt}}{\textbf {x}}(t)={\textbf {f}}({\textbf {x}}(t)),} where x ( t ) ∈ R n {\displaystyle {\textbf {x}}(t)\in \mathbb {R} ^{n}} is a state vector (snapshot) of the system at time t {\displaystyle t} and the function f ( x ( t ) ) {\displaystyle {\textbf {f}}({\textbf {x}}(t))} defines the equations of motion and constraints of the system. The time derivative may be either prescribed or numerically approximated from the snapshots. With x {\displaystyle {\textbf {x}}} and x ˙ {\displaystyle {\dot {\textbf {x}}}} sampled at m {\displaystyle m} equidistant points in time ( t 1 , t 2 , ⋯ , t m {\displaystyle t_{1},t_{2},\cdots ,t_{m}} ), these can be arranged into matrices of the form X = [ x T ( t 1 ) x T ( t 2 ) ⋮ x T ( t m ) ] = [ x 1 ( t 1 ) x 2 ( t 1 ) ⋯ x n ( t 1 ) x 1 ( t 2 ) x 2 ( t 2 ) ⋯ x n ( t 2 ) ⋮ ⋮ ⋱ ⋮ x 1 ( t m ) x 2 ( t m ) ⋯ x n ( t m ) ] , {\displaystyle {\bf {{X}={\begin{bmatrix}\mathbf {x} ^{\mathsf {T}}(t_{1})\\\mathbf {x} ^{\mathsf {T}}(t_{2})\\\vdots \\\mathbf {x} ^{\mathsf {T}}(t_{m})\end{bmatrix}}={\begin{bmatrix}x_{1}(t_{1})&x_{2}(t_{1})&\cdots &x_{n}(t_{1})\\x_{1}(t_{2})&x_{2}(t_{2})&\cdots &x_{n}(t_{2})\\\vdots &\vdots &\ddots &\vdots \\x_{1}(t_{m})&x_{2}(t_{m})&\cdots &x_{n}(t_{m})\end{bmatrix}},}}} and similarly for X ˙ {\displaystyle {\dot {\mathbf {X} }}} . Next, a library Θ ( X ) {\displaystyle \mathbf {\Theta } (\mathbf {X} )} of nonlinear candidate functions of the columns of X {\displaystyle {\textbf {X}}} is constructed, which may be constant, polynomial, or more exotic functions (like trigonometric and rational terms, and so on): Θ ( X ) = [ | | | | | | 1 X X 2 X 3 ⋯ sin ( X ) cos ( X ) ⋯ | | | | | | ] {\displaystyle \ \ \ {\bf {{\Theta }({\bf {{X})={\begin{bmatrix}\vline &\vline &\vline &\vline &&\vline &\vline &\\1&{\bf {X}}&{\bf {{X}^{2}}}&{\bf {{X}^{3}}}&\cdots &\sin({\bf {{X})}}&\cos({\bf {{X})}}&\cdots \\\vline &\vline &\vline &\vline &&\vline &\vline &\end{bmatrix}}}}}}} The number of possible model structures from this library is combinatorially high. f ( x ( t ) ) {\displaystyle {\textbf {f}}({\textbf {x}}(t))} is then substituted by Θ ( X ) {\displaystyle {\bf {{\Theta }({\textbf {X}})}}} and a vector of coefficients Ξ = [ ξ 1 ξ 2 ⋯ ξ n ] {\displaystyle {\bf {{\Xi }=\left[{\bf {{\xi }_{1}{\bf {{\xi }_{2}\cdots {\bf {{\xi }_{n}}}}}}}\right]}}} determining the active terms in f ( x ( t ) ) {\displaystyle {\textbf {f}}({\textbf {x}}(t))} : X ˙ = Θ ( X ) Ξ {\displaystyle {\dot {\bf {X}}}={\bf {{\Theta }({\bf {{X}){\bf {\Xi }}}}}}} Because only a few terms are expected to be active at each point in time, an assumption is made that f ( x ( t ) ) {\displaystyle {\textbf {f}}({\textbf {x}}(t))} admits a sparse representation in Θ ( X ) {\displaystyle {\bf {{\Theta }({\textbf {X}})}}} . This then becomes an optimization problem in finding a sparse Ξ {\displaystyle {\bf {\Xi }}} which optimally embeds X ˙ {\displaystyle {\dot {\textbf {X}}}} . In other words, a parsimonious model is obtained by performing least squares regression on the system (4) with sparsity-promoting ( L 1 {\displaystyle L_{1}} ) regularization ξ k = arg min ξ k ′ | | X ˙ k − Θ ( X ) ξ k ′ | | 2 + λ | | ξ k ′ | | 1 , {\displaystyle {\bf {{\xi }_{k}={\underset {\bf {{\xi }'_{k}}}{\arg \min }}\left|\left|{\dot {\bf {X}}}_{k}-{\bf {{\Theta }({\bf {{X}){\bf {{\xi }'_{k}}}}}}}\right|\right|_{2}+\lambda \left|\left|{\bf {{\xi }'_{k}}}\right|\right|_{1},}}} where λ {\displaystyle \lambda } is a regularization parameter. Finally, the sparse set of ξ k {\displaystyle {\bf {{\xi }_{k}}}} can be used to reconstruct the dynamical system: x ˙ k = Θ ( x ) ξ k {\displaystyle {\dot {x}}_{k}={\bf {{\Theta }({\bf {{x}){\bf {{\xi }_{k}}}}}}}}
Hexagonal sampling
A multidimensional signal is a function of M independent variables where M ≥ 2 {\displaystyle M\geq 2} . Real world signals, which are generally continuous time signals, have to be discretized (sampled) in order to ensure that digital systems can be used to process the signals. It is during this process of discretization where sampling comes into picture. Although there are many ways of obtaining a discrete representation of a continuous time signal, periodic sampling is by far the simplest scheme. Theoretically, sampling can be performed with respect to any set of points. But practically, sampling is carried out with respect to a set of points that have a certain algebraic structure. Such structures are called lattices. Mathematically, the process of sampling an N {\displaystyle N} -dimensional signal can be written as: w ( t ^ ) = w ( V . n ^ ) {\displaystyle w({\hat {t}})=w(V.{\hat {n}})} where t ^ {\displaystyle {\hat {t}}} is continuous domain M-dimensional vector (M-D) that is being sampled, n ^ {\displaystyle {\hat {n}}} is an M-dimensional integer vector corresponding to indices of a sample, and V is an N × N {\displaystyle N\times N} sampling matrix. == Motivation == Multidimensional sampling provides the opportunity to look at digital methods to process signals. Some of the advantages of processing signals in the digital domain include flexibility via programmable DSP operations, signal storage without the loss of fidelity, opportunity for encryption in communication, lower sensitivity to hardware tolerances. Thus, digital methods are simultaneously both powerful and flexible. In many applications, they act as less expensive alternatives to their analog counterparts. Sometimes, the algorithms implemented using digital hardware are so complex that they have no analog counterparts. Multidimensional digital signal processing deals with processing signals represented as multidimensional arrays such as 2-D sequences or sampled images.[1] Processing these signals in the digital domain permits the use of digital hardware where in signal processing operations are specified by algorithms. As real world signals are continuous time signals, multidimensional sampling plays a crucial role in discretizing the real world signals. The discrete time signals are in turn processed using digital hardware to extract information from the signal. == Preliminaries == === Region of Support === The region outside of which the samples of the signal take zero values is known as the Region of support (ROS). From the definition, it is clear that the region of support of a signal is not unique. === Fourier transform === The Fourier transform is a tool that allows us to simplify mathematical operations performed on the signal. The transform basically represents any signal as a weighted combination of sinusoids. The Fourier and the inverse Fourier transform of an M-dimensional signal can be defined as follows: X a ( Ω ^ ) = ∫ − ∞ + ∞ x a ( t ^ ) e − j Ω ^ T t ^ d t ^ {\displaystyle X_{a}({\hat {\Omega }})=\int _{-\infty }^{+\infty }\!x_{a}({\hat {t}})e^{-j{\hat {\Omega }}^{T}{\hat {t}}}d{\hat {t}}} x a ( t ^ ) = 1 2 π M ∫ − ∞ + ∞ X ( Ω ^ ) e ( j Ω ^ T t ^ ) d Ω ^ {\displaystyle x_{a}({\hat {t}})={\frac {1}{2\pi ^{M}}}\int _{-\infty }^{+\infty }\!X({\hat {\Omega }})e^{(j{\hat {\Omega }}^{T}{\hat {t}})}\,\mathrm {d} {\hat {\Omega }}} The cap symbol ^ indicates that the operation is performed on vectors. The Fourier transform of the sampled signal is observed to be a periodic extension of the continuous time Fourier transform of the signal. This is mathematically represented as: X ( ω ) = 1 | d e t ( V ) | ∑ k X a ( Ω ^ − U k ) {\displaystyle X(\omega )={\frac {1}{|det(V)|}}\sum _{k}\!X_{a}({\hat {\Omega }}-Uk)} where ω = V ~ Ω {\displaystyle \omega ={\tilde {V}}\Omega } and U = 2 π V ~ {\displaystyle U=2\pi {\tilde {V}}} is the periodicity matrix where ~ denotes matrix transposition. Thus sampling in the spatial domain results in periodicity in the Fourier domain. === Aliasing === A band limited signal may be periodically replicated in many ways. If the replication results in an overlap between replicated regions, the signal suffers from aliasing. Under such conditions, a continuous time signal cannot be perfectly recovered from its samples. Thus in order to ensure perfect recovery of the continuous signal, there must be zero overlap multidimensional sampling of the replicated regions in the transformed domain. As in the case of 1-dimensional signals, aliasing can be prevented if the continuous time signal is sampled at an adequate sufficiently high rate. === Sampling density === It is a measure of the number of samples per unit area. It is defined as: S . D = 1 | d e t ( V ) | = | d e t ( U ) | 4 π 2 {\displaystyle S.D={\frac {1}{|det(V)|}}={\frac {|det(U)|}{4\pi ^{2}}}} . The minimum number of samples per unit area required to completely recover the continuous time signal is termed as optimal sampling density. In applications where memory or processing time are limited, emphasis must be given to minimizing the number of samples required to represent the signal completely. == Existing approaches == For a bandlimited waveform, there are infinitely many ways the signal can be sampled without producing aliases in the Fourier domain. But only two strategies are commonly used: rectangular sampling and hexagonal sampling. === Rectangular and Hexagonal sampling === In rectangular sampling, a 2-dimensional signal, for example, is sampled according to the following V matrix: V r e c t = [ T 1 0 0 T 2 ] {\displaystyle V_{rect}={\begin{bmatrix}T1&0\\0&T2\end{bmatrix}}} where T1 and T2 are the sampling periods along the horizontal and vertical direction respectively. In hexagonal sampling, the V matrix assumes the following general form: V h e x = [ T 1 T 1 − T 2 T 2 ] {\displaystyle V_{hex}={\begin{bmatrix}T1&T1\\-T2&T2\end{bmatrix}}} The difference in the efficiency of the two schemes is highlighted using a bandlimited signal with a circular region of support of radius R. The circle can be inscribed in a square of length 2R or a regular hexagon of length 2 R 3 {\displaystyle {\frac {2R}{\sqrt {3}}}} . Consequently, the region of support is now transformed into a square and a hexagon respectively. If these regions are periodically replicated in the frequency domain such that there is zero overlap between any two regions, then by periodically replicating the square region of support, we effectively sample the continuous signal on a rectangular lattice. Similarly periodic replication of the hexagonal region of support maps to sampling the continuous signal on a hexagonal lattice. From U, the periodicity matrix, we can calculate the optimal sampling density for both the rectangular and hexagonal schemes. It is found that in order to completely recover the circularly band-limited signal, the hexagonal sampling scheme requires 13.4% fewer samples than the rectangular sampling scheme. The reduction may appear to be of little significance for a 2-dimensional signal. But as the dimensionality of the signal increases, the efficiency of the hexagonal sampling scheme will become far more evident. For instance, the reduction achieved for an 8-dimensional signal is 93.8%. To highlight the importance of the obtained result [2], try and visualize an image as a collection of infinite number of samples. The primary entity responsible for vision, i.e. the photoreceptors (rods and cones) are present on the retina of all mammals. These cells are not arranged in rows and columns. By adapting a hexagonal sampling scheme, our eyes are able to process images much more efficiently. The importance of hexagonal sampling lies in the fact that the photoreceptors of the human vision system lie on a hexagonal sampling lattice and, thus, perform hexagonal sampling.[3] In fact, it can be shown that the hexagonal sampling scheme is the optimal sampling scheme for a circularly band-limited signal. == Applications == === Aliasing effects minimized by the use of optimal sampling grids === Recent advances in the CCD technology has made hexagonal sampling feasible for real life applications. Historically, because of technology constraints, detector arrays were implemented only on 2-dimensional rectangular sampling lattices with rectangular shape detectors. But the super [CCD] detector introduced by Fuji has an octagonal shaped pixel in a hexagonal grid. Theoretically, the performance of the detector was greatly increased by introducing an octagonal pixel. The number of pixels required to represent the sample was reduced and there was significant improvement in the Signal-to-Noise Ratio (SNR) when compared with that of a rectangular pixel. But the drawback of using hexagonal pixels is that the associated fill factor will be less than 82%. An alternative method would be to interpolate hexagonal pixels in such a manner that we ultimately end up with a rectangular grid. The Spot 5 satellite incorporates a
Vinelink.com
Vinelink.com (VINE) is a national website in the United States that allows victims of crime, and the general public, to track the movements of prisoners held by the various states and territories. The first four letters in the websites name, "vine", are an acronym for "Victim Information and Notification Everyday". Vinelink.com displays information, based on the information provided by the various states' departments of correction and other law enforcement agencies, on whether an inmate is in custody, has been released, has been granted parole or probation, or has escaped from custody. In some cases, the website will reveal whether a defendant has been granted parole or probation, but then subsequently violated conditions of their release and become a fugitive. Information provided on Vinelink.com represents metadata, in that the website lists a defendant's custody status; but does not list what the individual is charged with, their criminal history, or the amount of their bail, if applicable. Internet users accessing the Vinelink.com website choose from a map of states and provinces within the United States where they wish to perform a search for an inmate. The user may then search for an individual using the inmate's or parolee's name, or by entering the inmate's specific department of corrections inmate number, if known. When the inmate's custody status changes, users who have registered to be notified of such changes will be notified via email, phone or both. This information is currently released upon request, without the website requesting reasons for the users search or requiring payment, as public records available to the general public. Inmate information is available for most states, and for Puerto Rico, on the website. The states of Arizona, Georgia, Massachusetts, Montana, New Hampshire and West Virginia provide very limited information on the site. In March of 2025, The Maine Sheriff's Association entered into a contract to pilot the use of the VINE system in three counties in the state as well as a regional jail, therefore making South Dakota the only state that does not participate in the VINE system to any degree. The website does not provide data on prisoners detained by the Federal Bureau of Prisons which has its own inmate locator web site nor for inmates of the U.S. military prisons.