LCD crosstalk is a visual defect in an LCD screen which occurs because of interference between adjacent pixels. Owing to the way rows and columns in the display are addressed, and charge is pushed around, the data on one part of the display has the potential to influence what is displayed elsewhere. This is generally known as crosstalk, and in matrix displays typically occurs in the horizontal and vertical directions. Crosstalk used to be a serious problem in the old passive-matrix (STN) displays, but is rarely discernable in modern active-matrix (TFT) displays. A fortunate side effect of inversion (see above) is that, for most display material, what little crosstalk there is largely cancelled out. For most practical purposes, the level of crosstalk in modern LCDs is negligible. Certain patterns, particularly those involving fine dots, can interact with the inversion and reveal visible crosstalk. If you try moving a small Window in front of the inversion pattern (above) which makes your screen flicker the most, you may well see crosstalk in the surrounding pattern. Different patterns are required to reveal crosstalk on different displays (depending on their inversion scheme).
System requirements specification
A System Requirements Specification (SysRS) (abbreviated SysRS to be distinct from a software requirements specification (SRS)) is a structured collection of information that embodies the requirements of a system. A business analyst (BA), sometimes titled system analyst, is responsible for analyzing the business needs of their clients and stakeholders to help identify business problems and propose solutions. Within the systems development life cycle domain, the BA typically performs a liaison function between the business side of an enterprise and the information technology department or external service providers.
Final Cut Express
Final Cut Express was a video editing software suite created by Apple Inc. It was the consumer version of Final Cut Pro and was designed for advanced editing of digital video as well as high-definition video, which was used by many amateur and professional videographers. Final Cut Express was considered a step above iMovie in terms of capabilities, but a step underneath Final Cut Pro and its suite of applications. As of June 21, 2011, Final Cut Express was discontinued in favor of Final Cut Pro X. == History == Final Cut Express 1.0, based on Final Cut Pro 3, was released at Macworld Conference and Expo in San Francisco in 2003. The second version, based on Final Cut Pro 4, was released at Macworld San Francisco in 2004. The third version, capable of editing high definition video, was also announced at Macworld San Francisco a year later, and was released as Final Cut Express HD in February 2005. It was based on Final Cut Pro HD (version 4.5) and included LiveType 1.2 and Soundtrack 1.2. Final Cut Express version 3.5 was released with little fanfare in May 2006 as a Universal Binary. In addition to improving real-time rendering with Dynamic RT, version 3.5 upgraded LiveType to version 2.0 and Soundtrack to version 1.5. In November 2007, Apple released Final Cut Express 4, which although it did not support real-time editing in the AVCHD format (it only allowed for transcoding AVCHD to Apple Intermediate Codec (AIC) provided that the camera was actually attached to the computer - it did not convert AVCHD files stored elsewhere and is currently for Intel processors only), imported iMovie '08 projects and included 50 new filters. It did not include Soundtrack 1.5, but it still included LiveType which enables users to create advanced text for the movies they created in Final Cut. The price was dropped from $299 for version 3.5 to $199 for version 4.0. In June 2011, Final Cut Express was officially discontinued, in favor of Final Cut Pro X. == Features == Final Cut Express' interface was identical to that of Final Cut Pro, but lacks some film-specific features, including Cinema Tools, multi-cam editing, batch capture, and a time code view. The program performed 32 undo operations, while Final Cut Pro did 99 [2]. Features the program did include were: The ability to keyframe filters Dynamic RT, which changes real-time settings on-the-fly Motion path keyframing Opacity keyframing Ripple, roll, slip, slide and blade edits Picture-in-picture and split-screen effects Up to 99 video tracks and 12 compositing modes Up to 99 audio tracks Motion project import Two-way color correction. Chroma key One feature of Final Cut Express that was not available in Final Cut Pro is the ability to import iMovie '08 projects (though transitions are not preserved). === RT Extreme === Inherited from Final Cut Pro, Final Cut Express features RT Extreme, which allows previews of some video filters and transitions without rendering. Audio that is not in the native AIFF file format needs rendering before it can be played back. RT Extreme has three modes: 'Safe', for seeing multiple video layers at a quality that more or less guarantees a smooth playback; 'Unlimited', which allows the maximum number of composited video layers to be viewed at the same time; and 'Dynamic', which alternates between these settings depending on how many simultaneous video tracks are present. Frame dropping may result from using 'Unlimited' on low-resource machines. === Boris Calligraphy === Like Final Cut Pro, Express also comes with Boris Calligraphy, a plugin for advanced titling and scrolling/crawling titles more sophisticated than the ones that can be created with the built-in title overlays. Calligraphy has a WYSIWYG interface and features wrapping, alignment, leading, kerning and tracking features, as well as allowing up to five custom outlines and five custom drop shadows to be defined for a selected portion of the title. == Soundtrack == Prior to version 4, Final Cut Express included Soundtrack 1.5, a music program similar to the consumer-level GarageBand, but designed for videographers who wish to add music to their films. Soundtrack comes with around 4,000 professionally recorded instrument loops and sound effects that can be arranged in multiple tracks beneath the video track. To use Soundtrack, users export their Final Cut Express sequence, or a marked portion thereof, as a reference file, which can include scoring markers defined in the timeline. This reference file can be imported as the video track in Soundtrack. Soundtrack is functionally and visually identical to Soundtrack Pro's multitrack editing mode, but includes fewer Logic plugins and lacks the highly regarded noise removal tool. Soundtrack was removed from Final Cut Express 4, which lowered its price and may have encouraged people to buy Logic Express.
Time-compressed speech
Time-compressed speech refers to an audio recording of verbal text in which the text is presented in a much shorter time interval than it would through normally-paced real time speech. The basic purpose is to make recorded speech contain more words in a given time, yet still be understandable. For example: a paragraph that might normally be expected to take 20 seconds to read, might instead be presented in 15 seconds, which would represent a time-compression of 25% (5 seconds out of 20). The term "time-compressed speech" should not be confused with "speech compression", which controls the volume range of a sound, but does not alter its time envelope. == Methods == While some voice talents are capable of speaking at rates significantly in excess of general norms, the term "time-compressed speech" most usually refers to examples in which the time-reduction has been accomplished through some form of electronic processing of the recorded speech. In general, recorded speech can be electronically time-compressed by: increasing its speed (linear compression); removing silences (selective editing); a combination of the two (non-linear compression). The speed of a recording can be increased, which will cause the material to be presented at a faster rate (and hence in a shorter amount of time), but this has the undesirable side-effect of increasing the frequency of the whole passage, raising the pitch of the voices, which can reduce intelligibility. There are normally silences between words and sentences, and even small silences within certain words, both of which can be reduced or removed ("edited-out") which will also reduce the amount of time occupied by the full speech recording. However, this can also have the effect of removing verbal "punctuation" from the speech, causing words and sentences to run together unnaturally, again reducing intelligibility. Vowels are typically held a minimum of 20 milliseconds, over many cycles of the fundamental pitch. DSP systems can detect the beginning and end of each cycle and then skip over some fraction of those cycles, causing the material to be presented at a faster rate, without changing the pitch, maintaining a "normal" tone of voice. The current preferred method of time-compression is called "non-linear compression", which employs a combination of selectively removing silences; speeding up the speech to make the reduced silences sound normally-proportioned to the text; and finally applying various data algorithms to bring the speech back down to the proper pitch. This produces a more acceptable result than either of the two earlier techniques; however, if unrestrained, removing the silences and increasing the speed can make a selection of speech sound more insistent, possibly to the point of unpleasantness. == Applications == === Advertising === Time-compressed speech is frequently used in television and radio advertising. The advantage of time-compressed speech is that the same number of words can be compressed into a smaller amount of time, reducing advertising costs, and/or allowing more information to be included in a given radio or TV advertisement. It is usually most noticeable in the information-dense caveats and disclaimers presented (usually by legal requirement) at the end of commercials—the aural equivalent of the "fine print" in a printed contract. This practice, however, is not new: before electronic methods were developed, spokespeople who could talk extremely quickly and still be understood were widely used as voice talents for radio and TV advertisements, and especially for recording such disclaimers. === Education === Time-compressed speech has educational applications such as increasing the information density of trainings, and as a study aid. A number of studies have demonstrated that the average person is capable of relatively easily comprehending speech delivered at higher-than-normal rates, with the peak occurring at around 25% compression (that is, 25% faster than normal); this facility has been demonstrated in several languages. Conversational speech (in English) takes place at a rate of around 150 wpm (words per minute), but the average person is able to comprehend speech presented at rates of up to 200-250 wpm without undue difficulty. Blind and severely visually impaired subjects scored similar comprehension levels at even higher rates, up to 300-350 wpm. Blind people have been found to use time-compressed speech extensively, for example, when reviewing recorded lectures from high school and college classes, or professional trainings. Comprehension rates in older blind subjects have been found to be as good, or in some cases better than those found in younger sighted subjects. Other studies have determined that the ability to comprehend highly time-compressed speech tends to fall off with increased age, and is also reduced when the language of the time-compressed speech is not the listener's native language. Non-native speakers can, however, improve their comprehension level of time-compressed speech with multiday training. === Voice Mail === Voice mail systems have employed time-compressed speech since as far back as the 1970s. In this application, the technology enables the rapid review of messages in high-traffic systems, by a relatively small number of people. === Streaming Multimedia === Time-compressed speech has been explored as one of a variety of interrelated factors which may be manipulated to increase the efficiency of streaming multimedia presentations, by significantly reducing the latency times involved in the transfer of large digitally encoded media files.
ARD Sounds
ARD Sounds (until March 2026: ARD Audiothek) is the joint audio portal of the state broadcasting stations of the ARD and Deutschlandradio on the Internet. The service was officially launched as a mobile app on November 8, 2017, on the occasion of the ARD Radio Play Days in Karlsruhe. A beta web version has also been available since November 2018; it replaces the radio features in the ARD Mediathek, which has since offered only video content. Editorial support for the ARD Audiothek is provided by the ARD, the online editorial team in Mainz. In April 2018, the ARD Audiothek won the German Digital Award in silver in the category "Mobile Apps - User Experience / Usability". Within a year, the mobile app version had been installed more than 510,000 times and had around 21 million audio views. The Android app recorded more than 100,000 downloads in October 2019, according to the Google Play Store.
Report generator
A report generator is a computer program whose purpose is to take data from a source such as a database, XML stream or a spreadsheet, and use it to produce a document in a format which satisfies a particular human readership. Report generation functionality is almost always present in database systems, where the source of the data is the database itself. It can also be argued that report generation is part of the purpose of a spreadsheet. Standalone report generators may work with multiple data sources and export reports to different document formats. Information systems theory specifies that information delivered to a target human reader must be timely, accurate and relevant. Report generation software targets the final requirement by making sure that the information delivered is presented in the way most readily understood by the target reader. == History == An early report writer was part of NOMAD developed in the 1970s. The evolution of reporting software has a rich history dating back to the mid-20th century, driven by the increasing need for businesses to efficiently analyze and present data. Initially, manual extraction and tabulation were commonplace, but the advent of computers in the 1960s marked a transformative phase with the emergence of basic reporting tools. The 1980s saw the widespread adoption of database management systems, laying the groundwork for more sophisticated reporting capabilities. Notable dedicated reporting software, such as Crystal Reports and BusinessObjects, gained prominence in the 1990s amidst the growing demand for business intelligence. The 21st century witnessed a paradigm shift towards web-based reporting solutions and the rise of self-service BI tools, empowering users to create reports independently. Presently, reporting software continues to evolve with a focus on data visualization, integration of artificial intelligence, and the imperative for real-time analytics in decision-making.
PhotoWorks (ray tracing software)
PhotoWorks is a raytrace rendering program created by Dassault Systèmes SolidWorks Corporation, formerly supplied as a photorealistic rendering add-in for SolidWorks. The program is based on the Mental Ray rendering engine. It has a library of scenes and materials that can be used with user-created SolidWorks files to create still frame images within the SolidWorks GUI. Since the 2011 release of SolidWorks, PhotoWorks has been replaced by the PhotoView 360 rendering utility. A 2010 review comparing PhotoWorks with three other rendering programs for SolidWorks (including PhotoView 360) gave the program high marks for render speed and built-in materials, but low marks for realism and user interface. Appearance File Type: .p2m