In artificial intelligence, the distributed multi-agent reasoning system (dMARS) was a platform for intelligent software agents developed at the AAII that makes uses of the belief–desire–intention software model (BDI). The design for dMARS was an extension of the intelligent agent cognitive architecture developed at SRI International called procedural reasoning system (PRS). The most recent incarnation of this framework is the JACK Intelligent Agents platform. == Overview == dMARS was an agent-oriented development and implementation environment written in C++ for building complex, distributed, time-critical systems.
Softwarp
Softwarp is a software technique to warp an image so that it can be projected on a curved screen. This can be done in real time by inserting the softwarp as a last step in the rendering cycle. The problem is to know how the image should be warped to look correct on the curved screen. There are several techniques to auto calibrate the warping by projecting a pattern and using cameras and/or sensors. The information from the sensors is sent to the software so that it can analyze the data and calculate the curvature of the projection screen. == Usage == The softwarp can be used to project virtual views on curved walls and domes. These are usually used in vehicle simulators, for instance boat-, car- and airplane simulators. To make it possible to cover a dome with a 360 degree view you need to use several projectors. A problem with using several projectors on the same screen is that the edges between the projected images get about twice the amount of light. This is solved by using a technique called edge blending. With this technique a “filter” is inserted on the edge that fades the image from 100% light strength (luminance) to 0% (the lowest luminance depends on the contrast ratio of the projector). == History == The first warping technologies used a hardware image processing unit to warp the image. This processing unit was inserted between the graphics card and the projector. The problem with this technique is that it depends on the type of signal and the quality of the signal from the graphics card to warp it correctly. The process unit also needs several lines of image information before it can start sending out the warped image. This adds a latency to the display system that could be a problem in simulators that need fast response time, for instance fighter jet simulators. Softwarping eliminates the latency.
Virtual Print Fee
Virtual Print Fee (VPF) is a subsidy paid by a film distributor towards the purchase of digital cinema projection equipment for use by a film exhibitor in the presentation of first release motion pictures. The subsidy is paid in the form of a fee per booking of a movie, intended to match the savings that occurs by not shipping a film print. The model is designed to help redistribute the savings realized by studios when using digital distribution instead of film print distribution and is intended to vanish when the transition phase is over when the vast majority of cinemas screens are equipped. == History == The first public demonstration of digital projection for cinema took place at ShoWest in 1999, and it was readily apparent that the technology was further ahead than the business model. Early technology presentations attempted to claim that the technology would pay for itself through new revenues generated by new forms of content. But exhibitors knew their audience, and could see that digital projection was only a replacement technology, creating new financial liabilities, and not new revenue. It wasn’t until the rollout of digital 3-D years later in 2005 that digital projection demonstrated that it could be used to generate additional revenue. The economics were challenging. Film projectors and platters cost in the neighborhood of US$30,000, while early digital projectors cost up to US$150,000. Further, film projectors had a lifetime of 30 years with relatively small annual expenditures in maintenance and replacement parts. On the other hand, exhibitors felt they would be lucky to get 10 years of service from a digital projector, after which there would have to be a refresh in capital expenditure. Meanwhile, distributors would realize significant savings by eliminating the high cost of film prints with corresponding shipping costs, and instead distributing digital files either by satellite or hard drive. The Virtual Print Fee was designed to better balance savings and expenditures for both exhibitors and distributors. It is intended to primarily assist in the replacement of film projectors, and not assist in the purchase of new projection equipment for new construction. To give confidence to financial institutions that digital cinema technology was stable and worthy of investment, Digital Cinema Initiatives was created in 2002, resulting in the release of the first version of the DCI Digital Cinema System Specification in 2005. The DCI Specification continues to be the core specification for digital cinema, establishing the baseline technology and system requirements for which studios will release digital movies. The first set of VPF agreements executed with four major studios were announced by Christie/AIX in November 2005. Christie/AIX at that time was a subsidiary of Access Integrated Technology, now renamed Cinedigm Digital Cinema Corp. The agreements were for the rollout of digital cinema technology to 4000 screens. Since that time, numerous other Digital Cinema Deployment Agreements have been executed around the world, allowing exhibitors in nearly every territory to benefit from VPF subsidies in the conversion from film projection to digital projection.
Data communication
Data communication is the transfer of data over a point-to-point or point-to-multipoint communication channel. Data communication comprises data transmission and data reception and can be classified as analog transmission and digital communications. Analog data communication conveys voice, data, image, signal or video information using a continuous signal, which varies in amplitude, phase, or some other property. In baseband analog transmission, messages are represented by a sequence of pulses by means of a line code; in passband analog transmission, they are communicated by a limited set of continuously varying waveforms, using a digital modulation method. Passband modulation and demodulation are carried out by modem equipment. Digital transmission and digital reception are the transfer of either a digitized analog signal or a born-digital bitstream. Baseband digital transmission is regarded as comprising part of a digital signal, whereas passband transmission of digital data may also or alternatively be considered a form of digital-to-analog conversion. Data communication channels include copper wires, optical fibers, wireless communication using radio spectrum, storage media and computer buses. The data are represented as an electromagnetic signal, such as an electrical voltage, radiowave, microwave, or infrared signal. == Distinction between related subjects == Digital transmission or data transmission traditionally belongs to telecommunications and electrical engineering. Basic principles of data transmission may also be covered within the computer science or computer engineering topic of data communications, which also includes computer networking applications and communication protocols, for example, routing, switching and inter-process communication. Although the Transmission Control Protocol (TCP) involves transmission, TCP and other transport layer protocols are covered in computer networking but not discussed in a textbook or course about data transmission. In most textbooks, the term analog transmission only refers to the transmission of an analog message signal (without digitization) by means of an analog signal, either as a non-modulated baseband signal or as a passband signal using an analog modulation method such as AM or FM. It may also include analog-over-analog pulse modulated baseband signals such as pulse-width modulation. In a few books within the computer networking tradition, analog transmission also refers to passband transmission of bit-streams using digital modulation methods such as FSK, PSK and ASK. The theoretical aspects of data transmission are covered by information theory and coding theory. == Protocol layers and sub-topics == Courses and textbooks in the field of data transmission typically deal with the following OSI model protocol layers and topics: Layer 1, the physical layer: Channel coding including Digital modulation schemes Line coding schemes Forward error correction (FEC) codes Bit synchronization Multiplexing Equalization Channel models Layer 2, the data link layer: Channel access schemes, media access control (MAC) Packet mode communication and Frame synchronization Error detection and automatic repeat request (ARQ) Flow control Layer 6, the presentation layer: Source coding (digitization and data compression), and information theory. Cryptography (may occur at any layer) It is also common to deal with the cross-layer design of those three layers. == Applications and history == Data (mainly but not exclusively informational) has been sent via non-electronic (e.g. optical, acoustic, mechanical) means since the advent of communication. Analog signal data has been sent electronically since the advent of the telephone. However, the first data electromagnetic transmission applications in modern time were electrical telegraphy (1809) and teletypewriters (1906), which are both digital signals. The fundamental theoretical work in data transmission and information theory by Harry Nyquist, Ralph Hartley, Claude Shannon and others during the early 20th century, was done with these applications in mind. In the early 1960s, Paul Baran invented distributed adaptive message block switching for digital communication of voice messages using switches that were low-cost electronics. Donald Davies invented and implemented modern data communication during 1965–7, including packet switching, high-speed routers, communication protocols, hierarchical computer networks and the essence of the end-to-end principle. Baran's work did not include routers with software switches and communication protocols, nor the idea that users, rather than the network itself, would provide the reliability. Both were seminal contributions that influenced the development of computer networks. Data transmission is utilized in computers in computer buses and for communication with peripheral equipment via parallel ports and serial ports such as RS-232 (1969), FireWire (1995) and USB (1996). The principles of data transmission are also utilized in storage media for error detection and correction since 1951. The first practical method to overcome the problem of receiving data accurately by the receiver using digital code was the Barker code invented by Ronald Hugh Barker in 1952 and published in 1953. Data transmission is utilized in computer networking equipment such as modems (1940), local area network (LAN) adapters (1964), repeaters, repeater hubs, microwave links, wireless network access points (1997), etc. In telephone networks, digital communication is utilized for transferring many phone calls over the same copper cable or fiber cable by means of pulse-code modulation (PCM) in combination with time-division multiplexing (TDM) (1962). Telephone exchanges have become digital and software controlled, facilitating many value-added services. For example, the first AXE telephone exchange was presented in 1976. Digital communication to the end user using Integrated Services Digital Network (ISDN) services became available in the late 1980s. Since the end of the 1990s, broadband access techniques such as ADSL, Cable modems, fiber-to-the-building (FTTB) and fiber-to-the-home (FTTH) have become widespread to small offices and homes. The current tendency is to replace traditional telecommunication services with packet mode communication such as IP telephony and IPTV. Transmitting analog signals digitally allows for greater signal processing capability. The ability to process a communications signal means that errors caused by random processes can be detected and corrected. Digital signals can also be sampled instead of continuously monitored. The multiplexing of multiple digital signals is much simpler compared to the multiplexing of analog signals. Because of all these advantages, because of the vast demand to transmit computer data and the ability of digital communications to do so and because recent advances in wideband communication channels and solid-state electronics have allowed engineers to realize these advantages fully, digital communications have grown quickly. The digital revolution has also resulted in many digital telecommunication applications where the principles of data transmission are applied. Examples include second-generation (1991) and later cellular telephony, video conferencing, digital TV (1998), digital radio (1999), and telemetry. Data transmission, digital transmission or digital communications is the transfer of data over a point-to-point or point-to-multipoint communication channel. Examples of such channels include copper wires, optical fibers, wireless communication channels, storage media and computer buses. The data are represented as an electromagnetic signal, such as an electrical voltage, radio wave, microwave, or infrared light. While analog transmission is the transfer of a continuously varying analog signal over an analog channel, digital communication is the transfer of discrete messages over a digital or an analog channel. The messages are either represented by a sequence of pulses by means of a line code (baseband transmission) or by a limited set of continuously varying waveforms (passband transmission), using a digital modulation method. The passband modulation and corresponding demodulation (also known as detection) are carried out by modem equipment. According to the most common definition of a digital signal, both baseband and passband signals representing bit-streams are considered as digital transmission, while an alternative definition only considers the baseband signal as digital, and passband transmission of digital data as a form of digital-to-analog conversion. Data transmitted may be digital messages originating from a data source, for example, a computer or a keyboard. It may also be an analog signal, such as a phone call or a video signal, digitized into a bit-stream, for example,e using pulse-code modulation (PCM) or more advanced source coding (analog-to-digital conversion and
Democratization of technology
Democratization of technology is the process by which access to technology rapidly extends to an ever-broader audience, especially from a select group of people to the average public. New technologies and improved user experiences have empowered those outside of the technical industry to access and use technological products and services. At an increasing scale, consumers have greater access to use and purchase technologically sophisticated products, as well as to participate meaningfully in the development of these products. Industry innovation and user demand have been associated with more affordable, user-friendly products. This is an ongoing process, beginning with the development of mass production and increasing dramatically as digitization became commonplace. Thomas Friedman argued that the era of globalization has been characterized by the democratization of technology, democratization of finance, and democratization of information. Technology has been critical in the latter two processes, facilitating the rapid expansion of access to specialized knowledge and tools, as well as changing the way that people view and demand such access. A counter argument is that this is just a process of 'massification' - more people can use banks, technology, have access to information, but it does not mean there is any more democratic influence over its production, or that this massification promotes Democracy. == History == Scholars and social critics often cite the invention of the printing press as a major invention that changed the course of history. The force of the printing press rested not in its impact on the printing industry or inventors, but on its ability to transmit information to a broader public by way of mass production. This event is so widely recognized because of its social impact – as a democratizing force. The printing press is often seen as the historical counterpart to the Internet. After the development of the Internet in 1969, its use remained limited to communications between scientists and within government, although use of email and boards gained popularity among those with access. It did not become a popular means of communication until the 1990s. In 1993 the US federal government opened the Internet to commerce and the creation of HTML formed the basis for universal accessibility. === Major innovations === The Internet has played a critical role in modern life as a typical feature of most Western households, and has been key in the democratization of knowledge. It not only constitutes arguably the most critical innovation in this trend thus far; it has also allowed users to gain knowledge of and access to other technologies. Users can learn of new developments more quickly, and purchase high-tech products otherwise only actively marketed to recognized experts. Social media has also empowered and emboldened users to become contributors and critics of technological developments. Some have argued that cloud computing is having a major effect by allowing users greater access through mobility and pay-as-you-use capacity. The open-source model allows users to participate directly in development of software, rather than indirect participation, through contributing opinions. By being shaped by the user, development is directly responsive to user demand and can be obtained for free or at a low cost. In a comparable trend, arduino and littleBits have made electronics more accessible to users of all backgrounds and ages. The development of 3D printers has the potential to increasingly democratize production. Generative artificial intelligence tools have the potential to democratize the process of innovation by improving the ability of individuals to specify and visualize ideas. The democratization of artificial intelligence refers to the transition from AI as a high-cost, specialized field to one accessible to non-experts and smaller organizations. This process is driven by the release of open-weights models, the availability of cloud computing for model training, and the emergence of no-code development platforms. While early AI development was concentrated within Big Tech firms and elite research universities, the 2020s saw a proliferation of public tools like ChatGPT and repositories such as Hugging Face, which lowered the technical barriers to entry. However, the trend has faced criticism as the "illusion of democratization," as the underlying GPU hardware remains concentrated among a few global providers. == Cultural impact == This trend is linked to the spread of knowledge of and ability to perform high-tech tasks, challenging previous conceptions of expertise. Widespread access to technology, including lower costs, was critical to the transition to the new economy. Similarly, democratization of technology was also fuelled by this economic transition, which produced demands for technological innovation and optimism in technology-driven progress. Since the 1980s, a spreading constructivist conception of technology has emphasized that the social and technical domains are critically intertwined. Scholars have argued that technology is non-neutral, defined contextually and locally by a certain relationship with society. Andrew Feenberg, a central thinker in the philosophy of technology, argued that democratizing technology means expanding technological design to include alternative interests and values. When successful in doing so, this can be a tool for increasing inclusiveness. This also suggests an important participatory role for consumers if technology is to be truly democratic. Feenberg asserts that this must be achieved by consumer intervention in a liberated design process. Improved access to specialized knowledge and tools has been associated with an increase in the "do it yourself" (DIY) trend. This has also been associated with consumerization, whereby personal or privately owned devices and software are also used for business purposes. Some have argued that this is linked to reduced dependence on traditional information technology departments. Astra Taylor, the author of the book The People's Platform: Taking Back Power and Culture in the Digital Age, argues, "The promotion of Internet-enabled amateurism is a lazy substitute for real equality of opportunity." === Industry impact === In some ways, democratization of technology has strengthened this industry. Markets have broadened and diversified. Consumer feedback and input is available at a very low or no cost. However, related industries are experiencing decreased demand for qualified professionals as consumers are able to fill more of their demands themselves. Users of a range of types and status have access to increasingly similar technology. Because of the decreased costs and expertise necessary to use products and software, professionals (e.g. in the audio industry) may experience loss of work. In some cases, technology is accessible but sufficiently complex that most users without specialized training are able to operate it without necessarily understanding how it works. Additionally, the process of consumerization has led to an influx in the number of devices in businesses and accessing private networks that IT departments cannot control or access. While this can lead to lowered operating costs and increased innovation, it is also associated with security concerns that most businesses are unable to address at the pace of the spread of technology. === Political impact === Some scholars have argued that technological change will bring about a third wave of democracy. The Internet has been recognized for its role in promoting increased citizen advocacy and government transparency. Jesse Chen, a leading thinker in democratic engagement technologies, distinguishes the democratizing effects of technology from democracy itself. Chen has argued that, while the Internet may have democratizing effects, the Internet alone cannot deliver democracy at all levels of society unless technologies are purposely designed for the nuances of democracy, specifically the engagement of large groups of people in between elections in and beyond government. The spread of the Internet and other forms of technology has led to increased global connectivity. Many scholars believe that it has been associated in the developing world not only with increased Western influence, but also with the spread of democracy through increased communication, efficiency, and access to information. Scholars have drawn associations between the level of technological connectedness and democracy in many nations. Technology can enhance democracy in the developed world as well. In addition to increased communication and transparency, some electorates have implemented online voting to accommodate an increased number of citizens.
Artificial Inventor Project
The Artificial Inventor Project (AIP) is a global legal initiative headed by Professor Ryan Abbott dedicated to pursuing intellectual property (IP) rights for inventions and creative works generated autonomously by artificial intelligence (AI) systems without traditional human inventorship or authorship. The project coordinates a series of pro bono test cases worldwide, aiming to prompt law reform and public debate on how IP law should accommodate non-human creators. == History == In 2019, AIP filed patent applications in multiple jurisdictions, including the United States, United Kingdom, European Patent Office, Australia, Switzerland, and South Africa, naming the AI system DABUS (Device for the Autonomous Bootstrapping of Unified Sentience), created by Stephen Thaler, as the inventor. The aim was to challenge legal norms that require inventors to be natural persons and highlight pressing policy questions about AI-generated innovation and IP regimes. == Legal proceedings by jurisdiction == === Australia === In July 2021, a Federal Court of Australia judge (Beach J) ruled that AI can be considered an inventor under the Patents Act 1990, ordering IP Australia to reinstate the relevant patent. However, the full court then overturned this ruling on appeal and denied further review. === European Patent Office === The EPO Board of Appeal determined in 2022 that only a human inventor may be named, rendering DABUS‑based applications unacceptable. === South Africa === In 2021, a patent was granted listing DABUS as the inventor. As South Africa’s procedural system does not involve substantive inventorship review, the grant proceeded on formal grounds alone. === Switzerland === On 26 June 2025, the Swiss Federal Administrative Court ruled that artificial intelligence systems such as DABUS cannot be listed as inventors on patent applications. The court upheld the existing practice of the Swiss Federal Institute of Intellectual Property (IPI), affirming that only natural persons may be recognized as inventors under Swiss patent law. === United Kingdom === In December 2023, the UK Supreme Court unanimously held that AI systems cannot be legally recognized as inventors, affirming that "an inventor must be a person" under current British law. === United States === In Thaler v. Hirshfeld (2021), a U.S. federal court agreed with the USPTO that inventors must be natural persons, rejecting the DABUS application and setting a precedent consistent with existing statute and administrative policy. == Criticism and impact == The project has fueled substantial discourse. Critics caution that allowing AI inventorship may complicate notions of accountability and ownership. Proponents argue that legal recognition must evolve to avoid disincentivizing innovation produced by AI and to maintain honesty about the true source of invention.
1tik
1tik, pronounced Antik (Arabic: أنتيك; lit. "Everything is going well") is a fully Algerian instant messaging, social media and mobile payment app. designed, developed and built locally by the Algerian start-up, INTAJ Digital, with backing from the state-owned company ATM Mobilis (who's the company's main sponsor). It is described as Algeria's first super-app that is entirely designed and built by local developers. == Etymology == The name "1tik" (Arabic: أنتيك) is drawn from the popular Algerian vernacular (Antik), the neologism, which appeared several years ago, means "everything is going well" or "it's all good". == History == 1tik was officially launched and announced the 20th December 2025 by INTAJ Digital's founder Youcef Toulaib and a team of 50 employees, making it the first ever Algerian instant messaging, social media and mobile payment app, rivaling with the growing influence of Yassir in Algeria. it grew in popularity after the presidency of Algeria and several other state-owned companies, medias, and ministries opened official accounts on the app.