Single-source publishing, also known as single-sourcing publishing, is a content management method which allows the same source content to be used across different forms of media and more than one time. The labor-intensive and expensive work of editing need only be carried out once, on only one document; that source document (the single source of truth) can then be stored in one place and reused. This reduces the potential for error, as corrections are only made one time in the source document. The benefits of single-source publishing primarily relate to the editor rather than the user. The user benefits from the consistency that single-sourcing brings to terminology and information. This assumes the content manager has applied an organized conceptualization to the underlying content (A poor conceptualization can make single-source publishing less useful). Single-source publishing is sometimes used synonymously with multi-channel publishing though whether or not the two terms are synonymous is a matter of discussion. == Definition == While there is a general definition of single-source publishing, there is no single official delineation between single-source publishing and multi-channel publishing, nor are there any official governing bodies to provide such a delineation. Single-source publishing is most often understood as the creation of one source document in an authoring tool and converting that document into different file formats or human languages (or both) multiple times with minimal effort. Multi-channel publishing can either be seen as synonymous with single-source publishing, or similar in that there is one source document but the process itself results in more than a mere reproduction of that source. == History == The origins of single-source publishing lie, indirectly, with the release of Windows 3.0 in 1990. With the eclipsing of MS-DOS by graphical user interfaces, help files went from being unreadable text along the bottom of the screen to hypertext systems such as WinHelp. On-screen help interfaces allowed software companies to cease the printing of large, expensive help manuals with their products, reducing costs for both producer and consumer. This system raised opportunities as well, and many developers fundamentally changed the way they thought about publishing. Writers of software documentation did not simply move from being writers of traditional bound books to writers of electronic publishing, but rather they became authors of central documents which could be reused multiple times across multiple formats. The first single-source publishing project was started in 1993 by Cornelia Hofmann at Schneider Electric in Seligenstadt, using software based on Interleaf to automatically create paper documentation in multiple languages based on a single original source file. XML, developed during the mid- to late-1990s, was also significant to the development of single-source publishing as a method. XML, a markup language, allows developers to separate their documentation into two layers: a shell-like layer based on presentation and a core-like layer based on the actual written content. This method allows developers to write the content only one time while switching it in and out of multiple different formats and delivery methods. In the mid-1990s, several firms began creating and using single-source content for technical documentation (Boeing Helicopter, Sikorsky Aviation and Pratt & Whitney Canada) and user manuals (Ford owners manuals) based on tagged SGML and XML content generated using the Arbortext Epic editor with add-on functions developed by a contractor. The concept behind this usage was that complex, hierarchical content that did not lend itself to discrete componentization could be used across a variety of requirements by tagging the differences within a single document using the capabilities built into SGML and XML. Ford, for example, was able to tag its single owner's manual files so that 12 model years could be generated via a resolution script running on the single completed file. Pratt & Whitney, likewise, was able to tag up to 20 subsets of its jet engine manuals in single-source files, calling out the desired version at publication time. World Book Encyclopedia also used the concept to tag its articles for American and British versions of English. Starting from the early 2000s, single-source publishing was used with an increasing frequency in the field of technical translation. It is still regarded as the most efficient method of publishing the same material in different languages. Once a printed manual was translated, for example, the online help for the software program which the manual accompanies could be automatically generated using the method. Metadata could be created for an entire manual and individual pages or files could then be translated from that metadata with only one step, removing the need to recreate information or even database structures. Although single-source publishing is now decades old, its importance has increased urgently as of the 2010s. As consumption of information products rises and the number of target audiences expands, so does the work of developers and content creators. Within the industry of software and its documentation, there is a perception that the choice is to embrace single-source publishing or render one's operations obsolete. == Criticism == Editors using single-source publishing have been criticized for below-standard work quality, leading some critics to describe single-source publishing as the "conveyor belt assembly" of content creation. While heavily used in technical translation, there are risks of error in regard to indexing. While two words might be synonyms in English, they may not be synonyms in another language. In a document produced via single-sourcing, the index will be translated automatically and the two words will be rendered as synonyms. This is because they are synonyms in the source language, while in the target language they are not.
AstroPay
AstroPay is a global digital wallet that provides users with a way to pay, send, and receive money. The app provides online payments, virtual and physical debit cards, peer-to-peer money transfers, and more. == History == AstroPay was founded in Uruguay in 2009 as a payment processing company. Over time, it expanded its services across Latin America, EMEA, and APAC. A significant milestone occurred in 2016, when AstroPay spun off dLocal, focusing on cross-border payments for emerging markets. dLocal became Uruguay's first unicorn and eventually went public through a successful IPO. In 2020, AstroPay spun off its payment processing services into a new entity, D24, to focus on mobile wallet for cross border. Between 2023 and 2024 the Company brought new leadership to guide its transition towards becoming a fully focused global digital multicurrency wallet where users save, send, and spend globally. This shift introduced enhanced features, including loyalty prepaid cards and multicurrency accounts. == Services == AstroPay offers three main products: AstroPay Wallet, AstroPay check-out, and AstroPay Platform. AstroPay Wallet is a digital wallet for consumers, where they have multicurrency accounts, prepaid card and marketplace. With AstroPay check-out, businesses can tap into AstroPay's wallet user base by accepting AstroPay as a payment method in their check-out options. Lastly, AstroPay Platform enables other businesses to use the AstroPay network to launch their own global wallet. == Brand endorsements, partnerships == AstroPay's marketing strategy has included the development of co-branded products with sports teams and other brand. The company sponsored Burnley Football Club during the 2018–19 Premier League season, renewing the partnership for the 2021–22 Premier League season when it became the club's official payment service partner. In August 2021, AstroPay entered into a partnership with the Wolverhampton Wanderers for the 2021-22 Premier League season, and the following year, became the team's shirt sponsor. Later, in September 2021, AstroPay expanded its partnership with Wolverhampton Wanderers, which included becoming the team's official payment partner and later, in 2023, co-launching a co-branded card. Other partnerships include Newcastle United in 2021 in the English Premier League. AstroPay made arrangements to ensure that branding and logo would be visible on the pitch-side LED advertising during Premier League matches. Furthermore, in June 2022, the company renewed it's partnership with Wolverhampton Wanderers for the 2022-23 Premier League season and launched its Wolves debit card in February 2023. Some other notable partnerships include: Universidad de Chile in 2024, Tottenham Hotspurs in 2023-25, and even a collaboration with Lionel Messi across all of Latin America. == Recent developments == AstroPay has refocused its strategy since 2023, pivoting from payment processing to concentrate on its global digital wallet. This move reflects a broader effort to redefine the company's market positioning by emphasizing global user-friendly financial services, while separating its identity from previous operations managed by dLocal and D24.
Brain technology
Brain technology, or self-learning know-how systems, defines a technology that employs latest findings in neuroscience. [see also neuro implants] The term was first introduced by the Artificial Intelligence Laboratory in Zurich, Switzerland, in the context of the Roboy project. Brain Technology can be employed in robots, know-how management systems and any other application with self-learning capabilities. In particular, Brain Technology applications allow the visualization of the underlying learning architecture often coined as "know-how maps". == Research and applications == The first demonstrations of BC in humans and animals took place in the 1960s when Grey Walter demonstrated use of non-invasively recorded encephalogram (EEG) signals from a human subject to control a slide projector (Graimann et al., 2010). Soon after Jacques J. Vidal coined the term brain–computer interface (BCI) in 1971, the Defense Advanced Research Projects Agency (DARPA) first starting funding brain–computer interface research and has since funded several brain–computer interface projects. That market is expected to reach a value of $1.72 billion by 2022. Brain–computer interfaces record brain activity, transmit the information out of the body, signal-process the data via algorithms, and convert them into command control signals. In 2012, a landmark study in Nature, led by pioneer Leigh Hochberg, MD, PhD, demonstrated that two people with tetraplegia were able to control robotic arms through thought when connected to the BrainGate neural interface system. The two participants were able to reach for and grasp objects in three-dimensional space, and one participant used the system to serve herself coffee for the first time since becoming paralyzed nearly 15 years prior. And in October 2020, two patients were able to wirelessly control an operating system to text, email, shop and bank using direct thought through the Stentrode brain computer interface (Journal of NeuroInterventional Surgery) in a study led by Thomas Oxley. This was the first time a brain–computer interface was implanted via the patient's blood vessels, eliminating the need for open brain surgery. Currently a number of groups are exploring a range of experimental devices using brain–computer interfaces, which have the potential to fundamentally change the way of life for patients with paralysis and a wide range of neurological disorders. These include: as Elon Musk, Facebook, and the University of California in San Francisco. The systems. This technology is also being explored as a neuromodulation device and may ultimately help diagnose and treat a range of brain pathologies, such as epilepsy and Parkinson's disease.
Astrostatistics
Astrostatistics is a discipline which spans astrophysics, statistical analysis and data mining. It is used to process the vast amount of data produced by automated scanning of the cosmos, to characterize complex datasets, and to link astronomical data to astrophysical theory. Many branches of statistics are involved in astronomical analysis including nonparametrics, multivariate regression and multivariate classification, time series analysis, and especially Bayesian inference. The field is closely related to astroinformatics.
Anomaly detection
In data analysis, anomaly detection (also referred to as outlier detection and sometimes as novelty detection) is generally understood to be the identification of rare items, events or observations which deviate significantly from the majority of the data and do not conform to a well defined notion of normal behavior. Such examples may arouse suspicions of being generated by a different mechanism, or appear inconsistent with the remainder of that set of data. Anomaly detection finds application in many domains including cybersecurity, medicine, machine vision, statistics, neuroscience, law enforcement and financial fraud to name only a few. Anomalies were initially searched for clear rejection or omission from the data to aid statistical analysis, for example to compute the mean or standard deviation. They were also removed to better predictions from models such as linear regression, and more recently their removal aids the performance of machine learning algorithms. However, in many applications anomalies themselves are of interest and are the observations most desirous in the entire data set, which need to be identified and separated from noise or irrelevant outliers. Three broad categories of anomaly detection techniques exist. Supervised anomaly detection techniques require a data set that has been labeled as "normal" and "abnormal" and involves training a classifier. However, this approach is rarely used in anomaly detection due to the general unavailability of labelled data and the inherent unbalanced nature of the classes. Semi-supervised anomaly detection techniques assume that some portion of the data is labelled. This may be any combination of the normal or anomalous data, but more often than not, the techniques construct a model representing normal behavior from a given normal training data set, and then test the likelihood of a test instance to be generated by the model. Unsupervised anomaly detection techniques assume the data is unlabelled and are by far the most commonly used due to their wider and relevant application. == Definition == Many attempts have been made in the statistical and computer science communities to define an anomaly. The most prevalent ones include the following, and can be categorised into three groups: those that are ambiguous, those that are specific to a method with pre-defined thresholds usually chosen empirically, and those that are formally defined: === Ill defined === An outlier is an observation which deviates so much from the other observations as to arouse suspicions that it was generated by a different mechanism. Anomalies are instances or collections of data that occur very rarely in the data set and whose features differ significantly from most of the data. An outlier is an observation (or subset of observations) which appears to be inconsistent with the remainder of that set of data. An anomaly is a point or collection of points that is relatively distant from other points in multi-dimensional space of features. Anomalies are patterns in data that do not conform to a well-defined notion of normal behaviour. === Specific === Let T be observations from a univariate Gaussian distribution and O a point from T. Then the z-score for O is greater than a pre-selected threshold if and only if O is an outlier. == History == === Intrusion detection === The concept of intrusion detection, a critical component of anomaly detection, has evolved significantly over time. Initially, it was a manual process where system administrators would monitor for unusual activities, such as a vacationing user's account being accessed or unexpected printer activity. This approach was not scalable and was soon superseded by the analysis of audit logs and system logs for signs of malicious behavior. By the late 1970s and early 1980s, the analysis of these logs was primarily used retrospectively to investigate incidents, as the volume of data made it impractical for real-time monitoring. The affordability of digital storage eventually led to audit logs being analyzed online, with specialized programs being developed to sift through the data. These programs, however, were typically run during off-peak hours due to their computational intensity. The 1990s brought the advent of real-time intrusion detection systems capable of analyzing audit data as it was generated, allowing for immediate detection of and response to attacks. This marked a significant shift towards proactive intrusion detection. As the field has continued to develop, the focus has shifted to creating solutions that can be efficiently implemented across large and complex network environments, adapting to the ever-growing variety of security threats and the dynamic nature of modern computing infrastructures. == Applications == Anomaly detection is applicable in a very large number and variety of domains, and is an important subarea of unsupervised machine learning. As such it has applications in cyber-security, intrusion detection, fraud detection, fault detection, system health monitoring, event detection in sensor networks, detecting ecosystem disturbances, defect detection in images using machine vision, medical diagnosis and law enforcement. === Intrusion detection === Anomaly detection was proposed for intrusion detection systems (IDS) by Dorothy Denning in 1986. Anomaly detection for IDS is normally accomplished with thresholds and statistics, but can also be done with soft computing, and inductive learning. Types of features proposed by 1999 included profiles of users, workstations, networks, remote hosts, groups of users, and programs based on frequencies, means, variances, covariances, and standard deviations. The counterpart of anomaly detection in intrusion detection is misuse detection. === Fintech fraud detection === Anomaly detection is vital in fintech for fraud prevention. === Preprocessing === Preprocessing data to remove anomalies can be an important step in data analysis, and is done for a number of reasons. Statistics such as the mean and standard deviation are more accurate after the removal of anomalies, and the visualisation of data can also be improved. In supervised learning, removing the anomalous data from the dataset often results in a statistically significant increase in accuracy. === Video surveillance === Anomaly detection has become increasingly vital in video surveillance to enhance security and safety. With the advent of deep learning technologies, methods using Convolutional Neural Networks (CNNs) and Simple Recurrent Units (SRUs) have shown significant promise in identifying unusual activities or behaviors in video data. These models can process and analyze extensive video feeds in real-time, recognizing patterns that deviate from the norm, which may indicate potential security threats or safety violations. An important aspect for video surveillance is the development of scalable real-time frameworks. Such pipelines are required for processing multiple video streams with low computational resources. === IT infrastructure === In IT infrastructure management, anomaly detection is crucial for ensuring the smooth operation and reliability of services. These are complex systems, composed of many interactive elements and large data quantities, requiring methods to process and reduce this data into a human and machine interpretable format. Techniques like the IT Infrastructure Library (ITIL) and monitoring frameworks are employed to track and manage system performance and user experience. Detected anomalies can help identify and pre-empt potential performance degradations or system failures, thus maintaining productivity and business process effectiveness. === IoT systems === Anomaly detection is critical for the security and efficiency of Internet of Things (IoT) systems. It helps in identifying system failures and security breaches in complex networks of IoT devices. The methods must manage real-time data, diverse device types, and scale effectively. Garg et al. have introduced a multi-stage anomaly detection framework that improves upon traditional methods by incorporating spatial clustering, density-based clustering, and locality-sensitive hashing. This tailored approach is designed to better handle the vast and varied nature of IoT data, thereby enhancing security and operational reliability in smart infrastructure and industrial IoT systems. === Petroleum industry === Anomaly detection is crucial in the petroleum industry for monitoring critical machinery. A 2015 paper proposed a novel segmentation algorithm using support vector machines to analyze sensor data for real-time anomaly detection. === Oil and gas pipeline monitoring === In the oil and gas sector, anomaly detection is not just crucial for maintenance and safety, but also for environmental protection. Aljameel et al. propose an advanced machine learning-based model for detecting minor leaks in oil and gas pipelines, a task traditional methods may miss.
I-MSCP
i-MSCP (internet Multi Server Control Panel) was a free and open-source software for shared hosting environments management on Linux servers. It comes with a large choice of modules for various services such as Apache2, ProFTPd, Dovecot, Courier, Bind9, and can be easily extended through plugins, or listener files using its events-based API. Latest stable is the 1.5.3 version (build 2018120800) which has been released on 8 December 2018. The i-MSCP is no longer under development, although the developer has repeatedly claimed to be working on a new version, which has never has been published or even shown in any possible way. Whether development occurs or not, the current version of the software is not installable, as it only supports outdated versions of systems for which some of the necessary software to install i-MSCP cannot be installed. == Licensing == i-MSCP has a dual license. A part of the base code is licensed under the Mozilla Public License. All new code, and submissions to i-MSCP are licensed under the GNU Lesser General Public License Version 2.1 (LGPLv2). To solve this license conflict there is work on a complete rewrite for a completely LGPLv2 licensed i-MSCP. == Features == === Supported Linux Distributions === Debian Jessie (8.x), Stretch (9.x), Buster (10.x) Devuan Jessie (1.0), ASCII (2.x) Ubuntu Trusty Thar (14.04 LTS), Bionic Beaver (18.04 LTS) === Supported Daemons / Services === Web server: Apache (ITK, Fcgid and FastCGI/PHP-FPM), Nginx Name server: Bind9 MTA (Mail Transport Agent): Postfix MDA (Mail Delivery Agent): Courier, Dovecot Database: MySQL, MariaDB, Percona FTP-Server: ProFTPD, vsftpd Web statistics: AWStats === Addons === PhpMyAdmin Pydio, formerly AjaXplorer Net2ftp Roundcube Rainloop == Competing software == cPanel DTC Froxlor ISPConfig ispCP OpenPanel hestiacp Plesk SysCP Virtualmin
POP-11
POP-11 is a reflective, incrementally compiled programming language with many of the features of an interpreted language. It is the core language of the Poplog programming environment developed originally by the University of Sussex, and recently in the School of Computer Science at the University of Birmingham, which hosts the main Poplog website. POP-11 is an evolution of the language POP-2, developed in Edinburgh University, and features an open stack model (like Forth, among others). It is mainly procedural, but supports declarative language constructs, including a pattern matcher, and is mostly used for research and teaching in artificial intelligence, although it has features sufficient for many other classes of problems. It is often used to introduce symbolic programming techniques to programmers of more conventional languages like Pascal, who find POP syntax more familiar than that of Lisp. One of POP-11's features is that it supports first-class functions. POP-11 is the core language of the Poplog system. The availability of the compiler and compiler subroutines at run-time (a requirement for incremental compiling) gives it the ability to support a far wider range of extensions (including run-time extensions, such as adding new data-types) than would be possible using only a macro facility. This made it possible for (optional) incremental compilers to be added for Prolog, Common Lisp and Standard ML, which could be added as required to support either mixed language development or development in the second language without using any POP-11 constructs. This made it possible for Poplog to be used by teachers, researchers, and developers who were interested in only one of the languages. The most successful product developed in POP-11 was the Clementine data mining system, developed by ISL. After SPSS bought ISL, they renamed Clementine to SPSS Modeler and decided to port it to C++ and Java, and eventually succeeded with great effort, and perhaps some loss of the flexibility provided by the use of an AI language. POP-11 was for a time available only as part of an expensive commercial package (Poplog), but since about 1999 it has been freely available as part of the open-source software version of Poplog, including various added packages and teaching libraries. An online version of ELIZA using POP-11 is available at Birmingham. At the University of Sussex, David Young used POP-11 in combination with C and Fortran to develop a suite of teaching and interactive development tools for image processing and vision, and has made them available in the Popvision extension to Poplog. == Simple code examples == Here is an example of a simple POP-11 program: define Double(Source) -> Result; Source2 -> Result; enddefine; Double(123) => That prints out: 246 This one includes some list processing: define RemoveElementsMatching(Element, Source) -> Result; lvars Index; [[% for Index in Source do unless Index = Element or Index matches Element then Index; endunless; endfor; %]] -> Result; enddefine; RemoveElementsMatching("the", [[the cat sat on the mat]]) => ;;; outputs [[cat sat on mat]] RemoveElementsMatching("the", [[the cat] [sat on] the mat]) => ;;; outputs [[the cat] [sat on] mat] RemoveElementsMatching([[= cat]], [[the cat]] is a [[big cat]]) => ;;; outputs [[is a]] Examples using the POP-11 pattern matcher, which makes it relatively easy for students to learn to develop sophisticated list-processing programs without having to treat patterns as tree structures accessed by 'head' and 'tail' functions (CAR and CDR in Lisp), can be found in the online introductory tutorial. The matcher is at the heart of the SimAgent (sim_agent) toolkit. Some of the powerful features of the toolkit, such as linking pattern variables to inline code variables, would have been very difficult to implement without the incremental compiler facilities.