Multichannel Audio Digital Interface (MADI) standardized as AES10 by the Audio Engineering Society (AES) defines the data format and electrical characteristics of an interface that carries multiple channels of digital audio. The AES first documented the MADI standard in AES10-1991 and updated it in AES10-2003 and AES10-2008. The MADI standard includes a bit-level description and has features in common with the two-channel AES3 interface. MADI supports serial digital transmission over coaxial cable or fibre-optic lines of 28, 56, 32, or 64 channels; and sampling rates to 96 kHz and beyond with an audio bit depth of up to 24 bits per channel. Like AES3 and ADAT Lightpipe, it is a unidirectional interface from one sender to one receiver. == Development and applications == MADI was developed by AMS Neve, Solid State Logic, Sony and Mitsubishi and is widely used in the audio industry, especially in the professional audio sector. It provides advantages over other audio digital interface protocols and standards such as AES3, ADAT Lightpipe, TDIF (Tascam Digital Interface), and S/PDIF (Sony/Philips Digital Interface). These advantages include: Support for a greater number of channels per line Use of coaxial and optical fiber media that support transmission of audio signals over 100 meters, up to 3000 meters over multi-mode and 40,000 meters over single-mode optical fiber The original specification (AES10-1991) defined the MADI link as a 56-channel transport for linking large-format mixing consoles to digital multitrack recording devices. Large broadcast studios also adopted it for routing multi-channel audio throughout their facilities. The 2003 revision (AES10-2003) adds a 64-channel capability by removing varispeed operation and supports 96 kHz sampling frequency with reduced channel capacity. The latest AES10-2008 standard includes minor clarifications and updates to correspond to the current AES3 standard. Audio over Ethernet of various types is the primary alternative to MADI for transport of many channels of professional digital audio. == Transmission format == MADI links use a transmission format similar to Fiber Distributed Data Interface (FDDI) networking. Since MADI is most often transmitted on copper links via 75-ohm coaxial cables, it more closely compares to the FDDI specification for copper-based links, called CDDI. AES10-2003 recommends using BNC connectors with coaxial cables and SC connectors with optic fibers. MADI over fibre can support a range of up to 2 km. The basic data rate is 100 Mbit/s of data using 4B5B encoding to produce a 125 MHz physical baud rate. Unlike AES3, this clock is not synchronized to the audio sample rate, and the audio data payload is padded using JK sync symbols. Sync symbols may be inserted at any subframe boundary, and must occur at least once per frame. Though the standard disassociates the transmission clock from the audio sample rate, and thus requires a separate word clock connection to maintain synchronization, some vendors do give the option of locking to parts of the transmission timing information for purposes of deriving a word clock. The audio data is almost identical to the AES3 payload, though with more channels. Rather than letters, MADI assigns channel numbers from 0–63. Frame synchronization is provided by sync symbols outside the data itself, rather than an embedded preamble sequence, and the first four time slots of each sub-channel are encoded as normal data, used for sub-channel identification: Bit 0: Set to 1 to mark channel 0, the first channel in each frame Bit 1: Set to 1 to indicate that this channel is active (contains interesting data) Bit 2: notA/B channel marker, used to mark left (0) and right (1) channels. Generally, even channels are A and odd channels are B. Bit 3: Set to 1 to mark the beginning of a 192-sample data block == Sampling frequency == The original AES10-1991 specification allowed 56 channels at sample rates from 32 to 48 kHz with an additional vari-speed range of ± 12.5%. This leads to a total range of 28 to 54 kHz. At the highest frequency, this produces a total of 56 × 32 × 54 = 96768 kbit/s, leaving 3.232% of the channel for synchronization marks and transmit clock error. The 2003 revision specifies different relations between sampling frequency and number of channels. 32 kHz to 48 kHz ± 12.5%, 56 channels; 32 kHz to 48 kHz nominal, 64 channels; 64 kHz to 96 kHz ± 12.5%, 28 channels. With a 48 kHz sampling frequency, 64 channels take 64 × 32 × 48000 = 98.304 Mbit/s. Adding the minimum 8 × 58 kbit/s of framing produces 98688 bit/s, leaving 1.312% free for timing variation and other overhead. Both versions of the standard accommodate higher sampling frequencies (for example, 96 kHz or 192 kHz) by using two or more channels per audio sample on the link.
Rule-based machine translation
Rule-based machine translation (RBMT) is a classical approach of machine translation systems based on linguistic information about source and target languages. Such information is retrieved from (unilingual, bilingual or multilingual) dictionaries and grammars covering the main semantic, morphological, and syntactic regularities of each language. Having input sentences, an RBMT system generates output sentences on the basis of analysis of both the source and the target languages involved. RBMT has been progressively superseded by more efficient methods, particularly neural machine translation. == History == The first RBMT systems were developed in the early 1970s. The most important steps of this evolution were the emergence of the following RBMT systems: Systran Japanese MT systems Today, other common RBMT systems include: Apertium GramTrans == Types of RBMT == There are three different types of rule-based machine translation systems: Direct Systems (Dictionary Based Machine Translation) map input to output with basic rules. Transfer RBMT Systems (Transfer Based Machine Translation) employ morphological and syntactical analysis. Interlingual RBMT Systems (Interlingua) use an abstract meaning. RBMT systems can also be characterized as the systems opposite to Example-based Systems of Machine Translation (Example Based Machine Translation), whereas Hybrid Machine Translations Systems make use of many principles derived from RBMT. == Basic principles == The main approach of RBMT systems is based on linking the structure of the given input sentence with the structure of the demanded output sentence, necessarily preserving their unique meaning. The following example can illustrate the general frame of RBMT: A girl eats an apple. Source Language = English; Demanded Target Language = German Minimally, to get a German translation of this English sentence one needs: A dictionary that will map each English word to an appropriate German word. Rules representing regular English sentence structure. Rules representing regular German sentence structure. And finally, we need rules according to which one can relate these two structures together. Accordingly, we can state the following stages of translation: 1st: getting basic part-of-speech information of each source word: a = indef.article; girl = noun; eats = verb; an = indef.article; apple = noun 2nd: getting syntactic information about the verb "to eat": NP-eat-NP; here: eat – Present Simple, 3rd Person Singular, Active Voice 3rd: parsing the source sentence: (NP an apple) = the object of eat Often only partial parsing is sufficient to get to the syntactic structure of the source sentence and to map it onto the structure of the target sentence. 4th: translate English words into German a (category = indef.article) => ein (category = indef.article) girl (category = noun) => Mädchen (category = noun) eat (category = verb) => essen (category = verb) an (category = indef. article) => ein (category = indef.article) apple (category = noun) => Apfel (category = noun) 5th: Mapping dictionary entries into appropriate inflected forms (final generation): A girl eats an apple. => Ein Mädchen isst einen Apfel. == Ontologies == An ontology is a formal representation of knowledge that includes the concepts (such as objects, processes etc.) in a domain and some relations between them. If the stored information is of linguistic nature, one can speak of a lexicon. In NLP, ontologies can be used as a source of knowledge for machine translation systems. With access to a large knowledge base, rule-based systems can be enabled to resolve many (especially lexical) ambiguities on their own. In the following classic examples, as humans, we are able to interpret the prepositional phrase according to the context because we use our world knowledge, stored in our lexicons:I saw a man/star/molecule with a microscope/telescope/binoculars.Since the syntax does not change, a traditional rule-based machine translation system may not be able to differentiate between the meanings. With a large enough ontology as a source of knowledge however, the possible interpretations of ambiguous words in a specific context can be reduced. === Building ontologies === The ontology generated for the PANGLOSS knowledge-based machine translation system in 1993 may serve as an example of how an ontology for NLP purposes can be compiled: A large-scale ontology is necessary to help parsing in the active modules of the machine translation system. In the PANGLOSS example, about 50,000 nodes were intended to be subsumed under the smaller, manually-built upper (abstract) region of the ontology. Because of its size, it had to be created automatically. The goal was to merge the two resources LDOCE online and WordNet to combine the benefits of both: concise definitions from Longman, and semantic relations allowing for semi-automatic taxonomization to the ontology from WordNet. A definition match algorithm was created to automatically merge the correct meanings of ambiguous words between the two online resources, based on the words that the definitions of those meanings have in common in LDOCE and WordNet. Using a similarity matrix, the algorithm delivered matches between meanings including a confidence factor. This algorithm alone, however, did not match all meanings correctly on its own. A second hierarchy match algorithm was therefore created which uses the taxonomic hierarchies found in WordNet (deep hierarchies) and partially in LDOCE (flat hierarchies). This works by first matching unambiguous meanings, then limiting the search space to only the respective ancestors and descendants of those matched meanings. Thus, the algorithm matched locally unambiguous meanings (for instance, while the word seal as such is ambiguous, there is only one meaning of seal in the animal subhierarchy). Both algorithms complemented each other and helped constructing a large-scale ontology for the machine translation system. The WordNet hierarchies, coupled with the matching definitions of LDOCE, were subordinated to the ontology's upper region. As a result, the PANGLOSS MT system was able to make use of this knowledge base, mainly in its generation element. == Components == The RBMT system contains: a SL morphological analyser - analyses a source language word and provides the morphological information; a SL parser - is a syntax analyser which analyses source language sentences; a translator - used to translate a source language word into the target language; a TL morphological generator - works as a generator of appropriate target language words for the given grammatica information; a TL parser - works as a composer of suitable target language sentences; Several dictionaries - more specifically a minimum of three dictionaries: a SL dictionary - needed by the source language morphological analyser for morphological analysis, a bilingual dictionary - used by the translator to translate source language words into target language words, a TL dictionary - needed by the target language morphological generator to generate target language words. The RBMT system makes use of the following: a Source Grammar for the input language which builds syntactic constructions from input sentences; a Source Lexicon which captures all of the allowable vocabulary in the domain; Source Mapping Rules which indicate how syntactic heads and grammatical functions in the source language are mapped onto domain concepts and semantic roles in the interlingua; a Domain Model/Ontology which defines the classes of domain concepts and restricts the fillers of semantic roles for each class; Target Mapping Rules which indicate how domain concepts and semantic roles in the interlingua are mapped onto syntactic heads and grammatical functions in the target language; a Target Lexicon which contains appropriate target lexemes for each domain concept; a Target Grammar for the target language which realizes target syntactic constructions as linearized output sentences. == Advantages == No bilingual texts are required. This makes it possible to create translation systems for languages that have no texts in common, or even no digitized data whatsoever. Domain independent. Rules are usually written in a domain independent manner, so the vast majority of rules will "just work" in every domain, and only a few specific cases per domain may need rules written for them. No quality ceiling. Every error can be corrected with a targeted rule, even if the trigger case is extremely rare. This is in contrast to statistical systems where infrequent forms will be washed away by default. Total control. Because all rules are hand-written, you can easily debug a rule-based system to see exactly where a given error enters the system, and why. Reusability. Because RBMT systems are generally built from a strong source language analysis that is fed to a transfer step and target language generator, the source language analysis and targe
Critical data studies
Critical data studies is the exploration of and engagement with social, cultural, and ethical challenges that arise when working with big data. It is through various unique perspectives and taking a critical approach that this form of study can be practiced. As its name implies, critical data studies draws heavily on the influence of critical theory, which has a strong focus on addressing the organization of power structures. This idea is then applied to the study of data. Interest in this unique field of critical data studies began in 2011 with scholars danah boyd and Kate Crawford posing various questions for the critical study of big data and recognizing its potential threatening impacts on society and culture. It was not until 2014, and more exploration and conversations, that critical data studies was officially coined by scholars Craig Dalton and Jim Thatcher. They put a large emphasis on understanding the context of big data in order to approach it more critically. Researchers such as David Ribes, Robert Soden, Seyram Avle, Sarah E. Fox, and Phoebe Sengers focus on understanding data as a historical artifact and taking an interdisciplinary approach towards critical data studies. Other key scholars in this discipline include Rob Kitchin and Tracey P. Lauriault who focus on reevaluating data through different spheres. Various critical frameworks that can be applied to analyze big data include Feminist, Anti-Racist, Queer, Indigenous, Decolonial, Anti-Ableist, as well as Symbolic and Synthetic data science. These frameworks help to make sense of the data by addressing power, biases, privacy, consent, and underrepresentation or misrepresentation concerns that exist in data as well as how to approach and analyze this data with a more equitable mindset. == Motivation == In their article in which they coin the term 'critical data studies,' Dalton and Thatcher also provide several justifications as to why data studies is a discipline worthy of a critical approach. First, 'big data' is an important aspect of twenty-first century society, and the analysis of 'big data' allows for a deeper understanding of what is happening and for what reasons. Big data is important to critical data studies because it is the type of data used within this field. Big data does not necessarily refer to a large data set, it can have a data set with millions of rows, but also a data set that just has a wide variety and expansive scope of data with a smaller type of dataset. As well as having whole populations in the data set and not just sample sizes. Furthermore, big data as a technological tool and the information that it yields are not neutral, according to Dalton and Thatcher, making it worthy of critical analysis in order to identify and address its biases. Building off this idea, another justification for a critical approach is that the relationship between big data and society is an important one, and therefore worthy of study. Ribes et. al. argue there is a need for an interdisciplinary understanding of data as a historical artifact as a motivating aspect of critical data studies.The overarching consensus in the Computer-Supported Cooperative Work (CSCW) field, is that people should speak for the data, and not let the data speak for itself. The sources of big data and it’s relationship to varied metadata can be a complicated one, which leads to data disorder and a need for an ethical analysis. Additionally, Iliadis and Russo (2016) have called for studying data assemblages. This is to say, data has innate technological, political, social, and economic histories that should be taken into consideration. Kitchin argues data is almost never raw, and it is almost always cooked, meaning that it is always spoken for by the data scientists utilizing it. Thus, Big Data should be open to a variety of perspectives, especially those of cultural and philosophical nature. Further, data contains hidden histories, ideologies, and philosophies. Big data technology can cause significant changes in society's structure and in the everyday lives of people, and, being a product of society, big data technology is worthy of sociological investigation. Moreover, data sets are almost never completely without any influence. Rather, data are shaped by the vision or goals of those gathering the data, and during the data collection process, certain things are quantified, stored, sorted and even discarded by the research team. A critical approach is thus necessary in order to understand and reveal the intent behind the information being presented.One of these critical approaches has been through feminist data studies. This method applies feminist principles to critical studies and data collecting and analysis. The goal of this is to address the power imbalance in data science and society. According to Catherine D’Ignazio and Lauren F. Klein, a power analysis can be performed by examining power, challenging power, evaluating emotion and embodiment, rethinking binaries and hierarchies, embracing pluralism, considering context, and making labor visible. Feminist data studies is part of the movement towards making data to benefit everyone and not to increase existing inequalities. Moreover, data alone cannot speak for themselves; in order to possess any concrete meaning, data must be accompanied by theoretical insight or alternative quantitative or qualitative research measures. Based on different social topics such as anti-racist data studies, critical data studies give a focus on those social issues concerning data. Specifically in anti-racist data studies they use a classification approach to get representation for those within that community. Desmond Upton Patton and others used their own classification system in the communities of Chicago to help target and reduce violence with young teens on twitter. They had students in those communities help them to decipher the terminology and emojis of these teens to target the language used in tweets that followed with violence outside of the computer screens. This is just one real world example of critical data studies and its application. Dalton and Thatcher argue that if one were to only think of data in terms of its exploitative power, there is no possibility of using data for revolutionary, liberatory purposes. Finally, Dalton and Thatcher propose that a critical approach in studying data allows for 'big data' to be combined with older, 'small data,' and thus create more thorough research, opening up more opportunities, questions and topics to be explored. == Issues and concerns for critical data scholars == Data plays a pivotal role in the emerging knowledge economy, driving productivity, competitiveness, efficiency, sustainability, and capital accumulation. The ethical, political, and economic dimensions of data dynamically evolve across space and time, influenced by changing regimes, technologies, and priorities. Technically, the focus lies on handling, storing, and analyzing vast data sets, utilizing machine learning-based data mining and analytics. This technological advancement raises concerns about data quality, encompassing validity, reliability, authenticity, usability, and lineage. The use of data in modern society brings about new ways of understanding and measuring the world, but also brings with it certain concerns or issues. Data scholars attempt to bring some of these issues to light in their quest to be critical of data. Technical and organizational issues could include the scope of the data set, meaning there is too little or too much data to work with, leading to inaccurate results. It becomes crucial for critical data scholars to carefully consider the adequacy of data volume for their analyses. The quality of the data itself is another facet of concern. The data itself could be of poor quality, such as an incomplete or messy data set with missing or inaccurate data values. This would lead researchers to have to make edits and assumptions about the data itself. Addressing these issues often requires scholars to make edits and assumptions about the data to ensure its reliability and relevance. Data scientists could have improper access to the actual data set, limiting their abilities to analyze it. Linnet Taylor explains how gaps in data can arise when people of varying levels of power have certain rights to their data sources. These people in power can control what data is collected, how it is displayed and how it is analyzed. The capabilities of the research team also play a crucial role in the quality of data analytics. The research team may have inadequate skills or organizational capabilities which leads to the actual analytics performed on the dataset to be biased. This can also lead to ecological fallacies, meaning an assumption is made about an individual based on data or results from a larger group of people. These technical and organizational challenges highlight the complexity of working with data and
Cryptographic Service Provider
A cryptographic service provider (CSP) is a package that "provides a concrete implementation of certain cryptographic services." A CSP offers operations and protocols to support a variety of use cases. The cryptographic application programming interface (API) provided by the CSP provides common solutions for different platforms, for example hardware and cloud services. == Microsoft Windows == In Microsoft Windows, a Cryptographic Service Provider is a software library that implements the Microsoft CryptoAPI (CAPI). CSPs implement encoding and decoding functions, which computer application programs may use, for example, to implement strong user authentication or for secure email. CSPs are independent modules that can be used by different applications. A user program calls CryptoAPI functions and these are redirected to CSPs functions. Since CSPs are responsible for implementing cryptographic algorithms and standards, applications do not need to be concerned about security details. Furthermore, each application can define which CSP it is going to use on its calls to CryptoAPI. In fact, all cryptographic activity is implemented in CSPs. CryptoAPI only works as a bridge between the application and the CSP. CSPs are implemented basically as a special type of DLL with special restrictions on loading and use. Every CSP must be digitally signed by Microsoft and the signature is verified when Windows loads the CSP. In addition, after being loaded, Windows periodically re-scans the CSP to detect tampering, either by malicious software such as computer viruses or by the user him/herself trying to circumvent restrictions (for example on cryptographic key length) that might be built into the CSP's code. To obtain a signature, non-Microsoft CSP developers must supply paperwork to Microsoft promising to obey various legal restrictions and giving valid contact information. As of circa 2000, Microsoft did not charge any fees to supply these signatures. For development and testing purposes, a CSP developer can configure Windows to recognize the developer's own signatures instead of Microsoft's, but this is a somewhat complex and obscure operation unsuitable for nontechnical end users. The CAPI/CSP architecture had its origins in the era of restrictive US government controls on the export of cryptography. Microsoft's default or "base" CSP then included with Windows was limited to 512-bit RSA public-key cryptography and 40-bit symmetric cryptography, the maximum key lengths permitted in exportable mass market software at the time. CSPs implementing stronger cryptography were available only to U.S. residents, unless the CSPs themselves had received U.S. government export approval. The system of requiring CSPs to be signed only on presentation of completed paperwork was intended to prevent the easy spread of unauthorized CSPs implemented by anonymous or foreign developers. As such, it was presented as a concession made by Microsoft to the government, in order to get export approval for the CAPI itself. After the Bernstein v. United States court decision establishing computer source code as protected free speech and the transfer of cryptographic regulatory authority from the U.S. State Department to the more pro-export Commerce Department, the restrictions on key lengths were dropped, and the CSPs shipped with Windows now include full-strength cryptography. The main use of third-party CSPs is to interface with external cryptography hardware such as hardware security modules (HSM) or smart cards. === Smart Card CSP === These cryptographic functions can be realized by a smart card, thus the Smart Card CSP is the Microsoft way of a PKCS#11. Microsoft Windows is identifying the correct Smart Card CSP, which have to be used, analyzing the answer to reset (ATR) of the smart card, which is registered in the Windows Registry. Installing a new CSP, all ATRs of the supported smart cards are enlisted in the registry. === Use of CSP in MS Office password protection === Cryptographic service providers can be used for encryption of Word, Excel, and PowerPoint documents starting from Microsoft Office XP. A standard encryption algorithm with a 40-bit key is used by default, but enabling a CSP enhances key length and thus makes decryption process more continuous. This only applies to passwords that are required to open document because this password type is the only one that encrypts a password-protected document.
European Grid Infrastructure
EGI (originally an initialism for European Grid Infrastructure) is a federation of computing and storage resource providers that deliver advanced computing and data analytics services for research and innovation. The Federation is governed by its participants represented in the EGI Council and coordinated by the EGI Foundation. As of 2024, the EGI Federation supports 160 scientific communities worldwide and over 95,000 users in their intensive data analysis. The most significant scientific communities supported by EGI in 2022 were Medical and Health Sciences, High Energy Physics, and Engineering and Technology. The EGI Federation provideds services through over 150 data centres, of which 25 are cloud sites, in 43 countries and 64 Research Infrastructures (4 of which are members of the Federation). == Name == Originally, EGI stood for European Grid Infrastructure. This reflected its focus on providing access to high-throughput computing resources across Europe using Grid computing techniques. However, as EGI's service offerings expanded beyond traditional grid computing, particularly with the incorporation of federated cloud services, the original meaning of the acronym became less accurate. To emphasise the broader scope of EGI's services and avoid any confusion associated with the outdated term "grid," it is recommended to refer to EGI simply as EGI. == Structure == === EGI Federation === The EGI Federation delivers a scalable digital research infrastructure (e-infrastructure), empowering tens of thousands of researchers across diverse scientific disciplines. Through the EGI Federation, researchers gain access to advanced computing and data analytics capabilities, including large-scale data analysis, while benefiting from the collaborative efforts of hundreds of service providers from both public and private sectors, consolidating resources from Europe and beyond. Overall, the EGI Federation offers a range of services, encompassing distributed high-throughput computing and cloud computing, storage and data management capabilities, co-development of new solutions, expert support, and comprehensive training opportunities. This ecosystem propels collaboration, scientific progress and innovation. === EGI Foundation === The EGI Foundation is the coordinating body of the EGI Federation. It was established in 2010 with headquarters in Amsterdam, Netherlands. The Foundation coordinates the research and innovation efforts of its members, spanning technical areas critical to data-intensive science, including large-scale data processing and analysis, distributed Artificial Intelligence/Machine Learning, federated Identity and access management and the application of digital twins for research. The day-to-day running of the EGI Foundation is supervised by the Executive Board. The board’s members work closely with the EGI Director on operational, technical and financial issues. The Executive Board’s members are appointed by the EGI Council for a two-year term. === EGI Council === The EGI Council is responsible for defining the strategic direction of the EGI Federation. The Council acts as the senior decision-making and supervisory authority of the EGI Foundation, with a mandate to define the strategic direction of the entire EGI ecosystem. === EGI Services === EGI offers a suite of services to support data-intensive research. These services include compute resources, orchestration tools, storage and data management solutions, training programmes, security and identity services, and applications. Compute resources encompass cloud compute, cloud container compute, high-throughput compute, and software distribution. Orchestration tools include the Workload Manager and infrastructure manager. Storage and data management solutions include online storage, data transfer, and DataHub. Training programmes cover FitSM, ISO 27001, and general training infrastructure. EGI Check-in and Secrets Store are key security and identity services, while applications such as Notebooks and Replay enhance research productivity. In addition to services for Research, EGI also provides services for Federation and Business. Services for Federation are designed to help resource providers and user communities collaborate and share resources. EGI also offers a range of services to support businesses in their digital transformation. Through the EGI Digital Innovation Hub (EGI DIH), companies can access advanced computing resources, networking, funding and training opportunities, collaborate with research institutions, and test solutions before investing. == History == In 2002, the first large-scale experimental facility was successfully demonstrated by the DataGrid project under the lead of CERN with tens of technical architects from the major High Energy Physics institutes in the world. For the first time, distributed computing was applied to data-intensive processing. It aimed at developing a large-scale computational grid to facilitate distributed data-intensive scientific computing across High Energy Physics, Earth Observation, and Biology science applications. On 28 February 2003, the first software release of LCG-MW was published. gLite, the Lightweight Middleware for Grid Computing and LCG, Large Hadron Collider Computing Grid, are the cornerstone of the Worldwide LHC Computing Grid, which expanded over time towards the EGI Federation. 2004 marks the year of the first pilot infrastructure, seeing the participation of CERN and data centres in the United Kingdom, Spain, Germany, the Netherlands, France, Canada, Russia, Bulgaria, the Asia-Pacific region and Switzerland. Over the years, the infrastructure has grown into a federation of 128 data centres and 25 cloud providers serving more than 95,000 users worldwide. In 2004, the first data processing tasks started being formally recorded in a central accounting system. The EGI Accounting Portal provides the accounting data for Compute, Storage and Data services gathered from the data centres of the EGI Federation. A few years later, in 2010, EGI was established as the coordinating body of the EGI Federation to build an integrated pan-European infrastructure to support European research communities primarily. In the same year, EGI launched the flagship project EGI Inspire. That project brought together European organisations to establish a sustainable European Grid Infrastructure for large-scale data analysis. The success of the project was due to the adoption of a distributed computing model to solve big data problems. Moreover, EGI-Inspire harmonised operational policies across its federation of affiliated data centres and cloud service providers worldwide, integrating e-infrastructures from 57 countries. The EGI Federation was the first to apply federation to cloud provisioning, opening a new avenue in large-scale interactive data analysis. In 2015, within EGI Engage, opening a new avenue in large-scale interactive data analysis. The EGI Federated Cloud is an IaaS-type cloud, incorporating academic and private clouds and virtualised resources built using open standards. Its development is driven by the needs of the scientific community, resulting in a novel research e-infrastructure that relies on well-established federated operational services, making EGI a dependable resource for scientific endeavours. In 2015, EGI, EUDAT, GÉANT, LIBER and OpenAIRE published a position paper on a 'European Open Science Cloud for Research'. With the EOSC-hub project in 2016, EGI started contributing in practice to shaping the services for the EOSC. The work continued with a series of projects, like EOSC Enhance, EOSC Life and EOSC Synergy. With EGI-ACE and its contribution to EOSC Future, EGI has continued developing the EOSC Core. In early 2024, EGI started providing services to the EOSC EU Node, and with EOSC Beyond it will provide new EOSC Core capabilities and pilot additional national and thematic nodes. In October 2024, EUDAT, GÉANT, OpenAIRE, PRACE and EGI signed a Memorandum of Understanding establishing the European e-Infrastructures Assembly. This collaboration will bolster the position and promote the services of e-Infrastructures, empowering researchers across Europe to drive innovation and advance scientific discovery.
Morphing
Morphing is a special effect in motion pictures and animations that changes (or morphs) one image or shape into another through a seamless transition. Traditionally such a depiction would be achieved through dissolving techniques on film. Since the early 1990s, this has been replaced by computer software to create more realistic transitions. A similar method is applied to audio recordings, for example, by changing voices or vocal lines. == Early transformation techniques == Long before digital morphing, several techniques were used for similar image transformations. Some of those techniques are closer to a matched dissolve – a gradual change between two pictures without warping the shapes in the images – while others did change the shapes in between the start and end phases of the transformation. === Tabula scalata === Known since at least the end of the 16th century, Tabula scalata is a type of painting with two images divided over a corrugated surface. Each image is only correctly visible from a certain angle. If the pictures are matched properly, a primitive type of morphing effect occurs when changing from one viewing angle to the other. === Mechanical transformations === Around 1790 French shadow play showman François Dominique Séraphin used a metal shadow figure with jointed parts to have the face of a young woman changing into that of a witch. Some 19th century mechanical magic lantern slides produced changes to the appearance of figures. For instance a nose could grow to enormous size, simply by slowly sliding away a piece of glass with black paint that masked part of another glass plate with the picture. === Matched dissolves === In the first half of the 19th century "dissolving views" were a popular type of magic lantern show, mostly showing landscapes gradually dissolving from a day to night version or from summer to winter. Other uses are known, for instance Henry Langdon Childe showed groves transforming into cathedrals. The 1910 short film Narren-grappen shows a dissolve transformation of the clothing of a female character. Maurice Tourneur's 1915 film Alias Jimmy Valentine featured a subtle dissolve transformation of the main character from respected citizen Lee Randall into his criminal alter ego Jimmy Valentine. The Peter Tchaikovsky Story in a 1959 TV-series episode of Disneyland features a swan automaton transforming into a real ballet dancer. In 1985, Godley & Creme created a "morph" effect using analogue cross-fades on parts of different faces in the video for "Cry". === Animation === In animation, the morphing effect was created long before the introduction of cinema. A phenakistiscope designed by its inventor Joseph Plateau was printed around 1835 and shows the head of a woman changing into a witch and then into a monster. Émile Cohl's 1908 animated film Fantasmagorie featured much morphing of characters and objects drawn in simple outlines. == Digital morphing == In the early 1990s, computer techniques capable of more convincing results saw increasing use. These involved distorting one image at the same time that it faded into another through marking corresponding points and vectors on the "before" and "after" images used in the morph. For example, one would morph one face into another by marking key points on the first face, such as the contour of the nose or location of an eye, and mark where these same points existed on the second face. The computer would then distort the first face to have the shape of the second face at the same time that it faded the two faces. To compute the transformation of image coordinates required for the distortion, the algorithm of Beier and Neely can be used. === Concerns === In 1993 concerns were raised about the authenticity of digitally altered images arising from morphing. Images of fake "tween" people found half way between two morphed people created a skeptical media long before AI. === Early examples === In or before 1986, computer graphics company Omnibus created a digital animation for a Tide commercial with a Tide detergent bottle smoothly morphing into the shape of the United States. The effect was programmed by Bob Hoffman. Omnibus re-used the technique in the movie Flight of the Navigator (1986). It featured scenes with a computer generated spaceship that appeared to change shape. The plaster cast of a model of the spaceship was scanned and digitally modified with techniques that included a reflection mapping technique that was also developed by programmer Bob Hoffman. The 1986 movie The Golden Child implemented early digital morphing effects from animal to human and back. Willow (1988) featured a more detailed digital morphing sequence with a person changing into different animals. A similar process was used a year later in Indiana Jones and the Last Crusade to create Walter Donovan's gruesome demise. Both effects were created by Industrial Light & Magic, using software developed by Tom Brigham and Doug Smythe (AMPAS). In 1991, morphing appeared notably in the Michael Jackson music video "Black or White" and in the movies Terminator 2: Judgment Day and Star Trek VI: The Undiscovered Country. The first application for personal computers to offer morphing was Gryphon Software Morph on the Macintosh. Other early morphing systems included ImageMaster, MorphPlus and CineMorph, all of which premiered for the Amiga in 1992. Other programs became widely available within a year, and for a time the effect became common to the point of cliché. For high-end use, Elastic Reality (based on MorphPlus) saw its first feature film use in In The Line of Fire (1993) and was used in Quantum Leap (work performed by the Post Group). At VisionArt Ted Fay used Elastic Reality to morph Odo for Star Trek: Deep Space Nine. The Snoop Dogg music video "Who Am I? (What's My Name?)", where Snoop Dogg and the others morph into dogs. Elastic Reality was later purchased by Avid, having already become the de facto system of choice, used in many hundreds of films. The technology behind Elastic Reality earned two Academy Awards in 1996 for Scientific and Technical Achievement going to Garth Dickie and Perry Kivolowitz. The effect is technically called a "spatially warped cross-dissolve". The first social network designed for user-generated morph examples to be posted online was Galleries by Morpheus. In late 1991 Yeti Productions employed a young Stephen Regelous to run it's 486 computer graphics system in Wellington New Zealand. After producer Barry Thomas showed him Michael Jackson's "Black or White", Regelous wrote 10,000 lines of C++ code of triangle-based digital morphing software. Together they created morphing based TV commercials for The NZ Cancer Society, Fit food, Salvation Army and others. The Fit food commercial employed morphing with 35mm, pin registered, digitally controlled motion control designed and made by Russell Collins with software by Stephen Regelous. In Taiwan, Aderans, a hair loss solutions provider, did a TV commercial featuring a morphing sequence in which people with lush, thick hair morph into one another, reminiscent of the end sequence of the "Black or White" video. === Present use === Morphing algorithms continue to advance and programs can automatically morph images that correspond closely enough with relatively little instruction from the user. This has led to the use of morphing techniques to create convincing slow-motion effects where none existed in the original film or video footage by morphing between each individual frame using optical flow technology. Morphing has also appeared as a transition technique between one scene and another in television shows, even if the contents of the two images are entirely unrelated. The algorithm in this case attempts to find corresponding points between the images and distort one into the other as they crossfade. While perhaps less obvious than in the past, morphing is used heavily today. Whereas the effect was initially a novelty, today, morphing effects are most often designed to be seamless and invisible to the eye. A particular use for morphing effects is modern digital font design. Using morphing technology, called interpolation or multiple master tech, a designer can create an intermediate between two styles, for example generating a semibold font by compromising between a bold and regular style, or extend a trend to create an ultra-light or ultra-bold. The technique is commonly used by font design studios. == Software == After Effects Animate Elastic Reality FantaMorph Gryphon Software Morph Morph Age Morpheus Nuke SilhouetteFX
Data monetization
Data monetization, a form of monetization, may refer to the act of generating measurable economic benefits from available data sources (analytics). Less commonly, it may also refer to the act of monetizing data services. In the case of analytics, typically, these benefits accrue as revenue or expense savings, but may also include market share or corporate market value gains. Data monetization leverages data generated through business operations, available exogenous data or content, as well as data associated with individual actors such as that collected via electronic devices and sensors participating in the internet of things. For example, the ubiquity of the internet of things is generating location data and other data from sensors and mobile devices at an ever-increasing rate. When this data is collated against traditional databases, the value and utility of both sources of data increases, leading to tremendous potential to mine data for social good, research and discovery, and achievement of business objectives. Closely associated with data monetization are the emerging data as a service models for transactions involving data by the data item. There are three ethical and regulatory vectors involved in data monetization due to the sometimes conflicting interests of actors involved in the digital supply chain. The individual data creator who generates files and records through his own efforts or owns a device such as a sensor or a mobile phone that generates data has a claim to ownership of data. The business entity that generates data in the course of its operations, such as its transactions with financial institutions or risk factors discovered through feedback from customers also has a claim on data captured through their systems and platforms. However, the person that contributed the data may also have a legitimate claim on the data. Internet platforms and service providers, such as Google or Facebook that require a user to forgo some ownership interest in their data in exchange for use of the platform also have a legitimate claim on the data. Thus the practice of data monetization, although common since 2000, is now getting increasing attention from regulators. The European Union and the United States Congress have begun to address these issues. For instance, in the financial services industry, regulations involving data are included in the Gramm–Leach–Bliley Act and Dodd-Frank. Some individual creators of data are shifting to using personal data vaults and implementing vendor relationship management concepts as a reflection of an increasing resistance to their data being federated or aggregated and resold without compensation. Groups such as the Personal Data Ecosystem Consortium, Patient privacy rights, and others are also challenging corporate cooptation of data without compensation. Financial services companies are a relatively good example of an industry focused on generating revenue by leveraging data. Credit card issuers and retail banks use customer transaction data to improve targeting of cross-sell offers. Partners are increasingly promoting merchant based reward programs which leverage a bank’s data and provide discounts to customers at the same time. == Types of data monetization == Internal data monetization - An organization's data is used internally, resulting in economic benefit. This is commonly the case in organizations using analytics to uncover insights, resulting in improved profit, cost savings or the avoidance of risk. Internal data monetization is currently the most common form of monetization, requiring far fewer security, intellectual property, and legal precautions when compared to other types. The potential economic gains from this type of data monetization are limited by the organization's internal structure and situation. External data monetization - A person or organization makes data they possess available on a for-fee basis to external parties, or as a broker for same. This type of monetization is less common and requires various methods to distribute the data to potential buyers and consumers. However, the economic gain that results from collecting data, packaging and distributing it, can be quite large. == Steps == Identification of available data sources – this includes data currently available for monetization as well as other external data sources that may enhance the value of what’s currently available. Connect, aggregate, attribute, validate, authenticate, and exchange data - this allows data to be converted directly into actionable or revenue generating insight or services. Set terms and prices and facilitate data trading - methods for data vetting, storage, and access. For example, many global corporations have locked and siloed data storage infrastructures, which hinders efficient access to data and cooperative and real-time exchange. Perform Research and analytics – draw predictive insights from existing data as a basis for using data for to reduce risk, enhance product development or performance, or improve customer experience or business outcomes. Action and leveraging – the last phase of monetizing data includes determining alternative or improved data centric products, ideas, or services. Examples may include real-time actionable triggered notifications or enhanced channels such as web or mobile response mechanisms. == Pricing variables and factors == A fee for use of a platform to connect buyers and sellers use of a platform to configure, organize, and otherwise process data included in a data trade connecting or including a device or sensor into a data supply chain connecting and credentialing a creator of a data source and a data buyer – often through a federated identity connecting a data source to other data sources to be included in a data supply chain use of an internet service or other transmission services for uploading and downloading data – sometimes, for an individual, through a personal cloud use of encrypted keys to achieve secure data transfer use of a search algorithm specifically designed to tag data sources that contain data points of value to the data buyer linking a data creator or generator to a data collection protocol or form server actions – such as a notification – triggered by an update to a data item or data source included in a data supply chain A price or exchange or other trade value assigned by a data creator or generator to a data item or a data source offered by a data buyer to a data creator assigned by a data buyer for a data item or a data source formatted according to criteria set by a data buyer An incremental fee assigned by a data buyer for a data item or a data set scaled to the reputation of the data creator == Benefits == Improved decision-making that leads to real time crowd sourced research, improved profits, decreased costs, reduced risk and improved compliance More impactful decisions (e.g., make real-time decisions) More timely (lower latency) decisions (e.g., a vendor making purchase recommendations while the customer is still on the phone or in the store, a customer connecting with multiple vendors to discover the best price, triggered notifications when thresholds are reached for data values) More granular decisions (e.g., localized pricing decisions at an individual or device or sensor level versus larger aggregates). Targeted Marketing (e.g., Vendors with access to big data can make targeted advertisements to specific customers within a set data pool decreasing costs for the advertiser and reaching most interested customers) == Frameworks == There are a wide variety of industries, firms and business models related to data monetization. The following frameworks have been offered to help understand the types of business models that are used: Roger Ehrenberg of IA Ventures, a venture capital firm that invests in this sector, has defined three basic types of data product firms: Contributory databases. The magic of these businesses is that a customer provides their own data in exchange for receiving a more robust set of aggregated data back that provides insight into the broader marketplace, or provides a vehicle for expressing a view. Give a little, get a lot back in return – a pretty compelling value proposition, and one that frequently results in a payment from the data contributor in exchange for receiving enriched, aggregated data. Once these contributory databases are developed and customers become reliant on their insights, they become extremely valuable and persistent data assets. Data processing platforms. These businesses create barriers through a combination of complex data architectures, proprietary algorithms, and rich analytics to help customers consume data in whatever form they please. Often these businesses have special relationships with key data providers, that when combined with other data and processed as a whole create valuable differentiation and competitive barriers. Bloomberg is an example of a powerful