In search of the best AI presentation maker? An AI presentation maker is software that uses machine learning to help you get more done — it turns a rough idea into a polished result in seconds. When choosing one, weigh output quality, pricing, export formats, and how well it fits the tools you already use. Whether you are a beginner or a pro, the right AI presentation maker slots into your workflow and pays for itself fast. Below we compare features, pricing, and real output so you can choose with confidence.
Cross-validation (statistics)
Cross-validation, sometimes called rotation estimation or out-of-sample testing, is any of various similar model validation techniques for assessing how the results of a statistical analysis will generalize to an independent data set. Cross-validation includes resampling and sample splitting methods that use different portions of the data to test and train a model on different iterations. It is often used in settings where the goal is prediction, and one wants to estimate how accurately a predictive model will perform in practice. It can also be used to assess the quality of a fitted model and the stability of its parameters. In a prediction problem, a model is usually given a dataset of known data on which training is run (training dataset), and a dataset of unknown data (or first seen data) against which the model is tested (called the validation dataset or testing set). The goal of cross-validation is to test the model's ability to predict new data that was not used in estimating it, in order to flag problems like overfitting or selection bias and to give an insight on how the model will generalize to an independent dataset (i.e., an unknown dataset, for instance from a real problem). One round of cross-validation involves partitioning a sample of data into complementary subsets, performing the analysis on one subset (called the training set), and validating the analysis on the other subset (called the validation set or testing set). To reduce variability, in most methods multiple rounds of cross-validation are performed using different partitions, and the validation results are combined (e.g. averaged) over the rounds to give an estimate of the model's predictive performance. In summary, cross-validation combines (averages) measures of fitness in prediction to derive a more accurate estimate of model prediction performance. == Motivation == Assume a model with one or more unknown parameters, and a data set to which the model can be fit (the training data set). The fitting process optimizes the model parameters to make the model fit the training data as well as possible. If an independent sample of validation data is taken from the same population as the training data, it will generally turn out that the model does not fit the validation data as well as it fits the training data. The size of this difference is likely to be large especially when the size of the training data set is small, or when the number of parameters in the model is large. Cross-validation is a way to estimate the size of this effect. === Example: linear regression === In linear regression, there exist real response values y 1 , … , y n {\textstyle y_{1},\ldots ,y_{n}} , and n p-dimensional vector covariates x1, ..., xn. The components of the vector xi are denoted xi1, ..., xip. If least squares is used to fit a function in the form of a hyperplane ŷ = a + βTx to the data (xi, yi) 1 ≤ i ≤ n, then the fit can be assessed using the mean squared error (MSE). The MSE for given estimated parameter values a and β on the training set (xi, yi) 1 ≤ i ≤ n is defined as: MSE = 1 n ∑ i = 1 n ( y i − y ^ i ) 2 = 1 n ∑ i = 1 n ( y i − a − β T x i ) 2 = 1 n ∑ i = 1 n ( y i − a − β 1 x i 1 − ⋯ − β p x i p ) 2 {\displaystyle {\begin{aligned}{\text{MSE}}&={\frac {1}{n}}\sum _{i=1}^{n}(y_{i}-{\hat {y}}_{i})^{2}={\frac {1}{n}}\sum _{i=1}^{n}(y_{i}-a-{\boldsymbol {\beta }}^{T}\mathbf {x} _{i})^{2}\\&={\frac {1}{n}}\sum _{i=1}^{n}(y_{i}-a-\beta _{1}x_{i1}-\dots -\beta _{p}x_{ip})^{2}\end{aligned}}} If the model is correctly specified, it can be shown under mild assumptions that the expected value of the MSE for the training set is (n − p − 1)/(n + p + 1) < 1 times the expected value of the MSE for the validation set (the expected value is taken over the distribution of training sets). Thus, a fitted model and computed MSE on the training set will result in an optimistically biased assessment of how well the model will fit an independent data set. This biased estimate is called the in-sample estimate of the fit, whereas the cross-validation estimate is an out-of-sample estimate. Since in linear regression it is possible to directly compute the factor (n − p − 1)/(n + p + 1) by which the training MSE underestimates the validation MSE under the assumption that the model specification is valid, cross-validation can be used for checking whether the model has been overfitted, in which case the MSE in the validation set will substantially exceed its anticipated value. (Cross-validation in the context of linear regression is also useful in that it can be used to select an optimally regularized cost function.) === General case === In most other regression procedures (e.g. logistic regression), there is no simple formula to compute the expected out-of-sample fit. Cross-validation is, thus, a generally applicable way to predict the performance of a model on unavailable data using numerical computation in place of theoretical analysis. == Types == Two types of cross-validation can be distinguished: exhaustive and non-exhaustive cross-validation. === Exhaustive cross-validation === Exhaustive cross-validation methods are cross-validation methods which learn and test on all possible ways to divide the original sample into a training and a validation set. ==== Leave-p-out cross-validation ==== Leave-p-out cross-validation (LpO CV) involves using p observations as the validation set and the remaining observations as the training set. This is repeated on all ways to cut the original sample on a validation set of p observations and a training set. LpO cross-validation require training and validating the model C p n {\displaystyle C_{p}^{n}} times, where n is the number of observations in the original sample, and where C p n {\displaystyle C_{p}^{n}} is the binomial coefficient. For p > 1 and for even moderately large n, LpO CV can become computationally infeasible. For example, with n = 100 and p = 30, C 30 100 ≈ 3 × 10 25 . {\displaystyle C_{30}^{100}\approx 3\times 10^{25}.} A variant of LpO cross-validation with p=2 known as leave-pair-out cross-validation has been recommended as a nearly unbiased method for estimating the area under ROC curve of binary classifiers. ==== Leave-one-out cross-validation ==== Leave-one-out cross-validation (LOOCV) is a particular case of leave-p-out cross-validation with p = 1. The process looks similar to jackknife; however, with cross-validation one computes a statistic on the left-out sample(s), while with jackknifing one computes a statistic from the kept samples only. LOO cross-validation requires less computation time than LpO cross-validation because there are only C 1 n = n {\displaystyle C_{1}^{n}=n} passes rather than C p n {\displaystyle C_{p}^{n}} . However, n {\displaystyle n} passes may still require quite a large computation time, in which case other approaches such as k-fold cross validation may be more appropriate. Pseudo-code algorithm: Input: x, {vector of length N with x-values of incoming points} y, {vector of length N with y-values of the expected result} interpolate( x_in, y_in, x_out ), { returns the estimation for point x_out after the model is trained with x_in-y_in pairs} Output: err, {estimate for the prediction error} Steps: err ← 0 for i ← 1, ..., N do // define the cross-validation subsets x_in ← (x[1], ..., x[i − 1], x[i + 1], ..., x[N]) y_in ← (y[1], ..., y[i − 1], y[i + 1], ..., y[N]) x_out ← x[i] y_out ← interpolate(x_in, y_in, x_out) err ← err + (y[i] − y_out)^2 end for err ← err/N === Non-exhaustive cross-validation === Non-exhaustive cross validation methods do not compute all ways of splitting the original sample. These methods are approximations of leave-p-out cross-validation. ==== k-fold cross-validation ==== In k-fold cross-validation, the original sample is randomly partitioned into k equal sized subsamples, often referred to as "folds". Of the k subsamples, a single subsample is retained as the validation data for testing the model, and the remaining k − 1 subsamples are used as training data. The cross-validation process is then repeated k times, with each of the k subsamples used exactly once as the validation data. The k results can then be averaged to produce a single estimation. The advantage of this method over repeated random sub-sampling (see below) is that all observations are used for both training and validation, and each observation is used for validation exactly once. 10-fold cross-validation is commonly used, but in general k remains an unfixed parameter. For example, setting k = 2 results in 2-fold cross-validation. In 2-fold cross-validation, the dataset is randomly shuffled into two sets d0 and d1, so that both sets are equal size (this is usually implemented by shuffling the data array and then splitting it in two). We then train on d0 and validate on d1, followed by training on d1 and validating on d0. When k = n (the number of observations), k-fold cross-validation is equivalent to leave-one-out cr
Underwater computer vision
Underwater computer vision is a subfield of computer vision. In recent years, with the development of underwater vehicles ( ROV, AUV, gliders), the need to be able to record and process huge amounts of information has become increasingly important. Applications range from inspection of underwater structures for the offshore industry to the identification and counting of fishes for biological research. However, no matter how big the impact of this technology can be to industry and research, it still is in a very early stage of development compared to traditional computer vision. One reason for this is that, the moment the camera goes into the water, a whole new set of challenges appear. On one hand, cameras have to be made waterproof, marine corrosion deteriorates materials quickly and access and modifications to experimental setups are costly, both in time and resources. On the other hand, the physical properties of the water make light behave differently, changing the appearance of a same object with variations of depth, organic material, currents, temperature etc. == Applications == Seafloor survey Vehicle navigation and positioning Biological monitoring {possibly aquatic biomonitoring) Video mosaics as visual navigation maps Submarine pipeline inspection Wreckage visualization Maintenance of underwater structures Drowning detection systems == Medium differences == === Illumination === In air, light comes from the whole hemisphere on cloudy days, and is dominated by the sun. In water direct lighting comes from a cone about 96° wide above the scene. This phenomenon is called Snell's window. Artificial lighting can be used where natural light levels are insufficient and where the light path is too long to produce acceptable colour, as the loss of colour is a function of the total distance through water from the source to the camera lens port. === Light attenuation === Unlike air, water attenuates light exponentially. This results in hazy images with very low contrast. The main reasons for light attenuation are light absorption (where energy is removed from the light) and light scattering, by which the direction of light is changed. Light scattering can further be divided into forward scattering, which results in an increased blurriness and backward scattering that limits the contrast and is responsible for the characteristic veil of underwater images. Both scattering and attenuation are heavily influenced by the amount of organic matter dissolved or suspended in the water. Light attenuation in water is also a function of the wavelength. This means that different colours are attenuated at different rates, leading to colour degradation.with depth and distance. Red and orange light are attenuated faster, followed by yellows and greens. Blue is the least attenuated visible wavelength. === Artificial lighting === == Challenges == In high level computer vision, human structures are frequently used as image features for image matching in different applications. However, the sea bottom lacks such features, making it hard to find correspondences in two images. In order to be able to use a camera in the water, a watertight housing is required. However, refraction will happen at the water-glass and glass-air interface due to differences in density of the materials. This has the effect of introducing a non-linear image deformation. The motion of the vehicle presents another special challenge. Underwater vehicles are constantly moving due to currents and other phenomena. This introduces another uncertainty to algorithms, where small motions may appear in all directions. This can be specially important for video tracking. In order to reduce this problem image stabilization algorithms may be applied. == Relevant technology == === Image restoration === Image restoration< techniques are intended to model the degradation process and then invert it, obtaining the new image after solving. It is generally a complex approach that requires plenty of parameters that vary a lot between different water conditions. === Image enhancement === Image enhancement only tries to provide a visually more appealing image without taking the physical image formation process into account. These methods are usually simpler and less computational intensive. === Color correction === Various algorithms exist that perform automatic color correction. The UCM (Unsupervised Color Correction Method), for example, does this in the following steps: It firstly reduces the color cast by equalizing the color values. Then it enhances contrast by stretching the red histogram towards the maximum and finally saturation and intensity components are optimized. == Underwater stereo vision == It is usually assumed that stereo cameras have been calibrated previously, geometrically and radiometrically. This leads to the assumption that corresponding pixels should have the same color. However this can not be guaranteed in an underwater scene, because of dispersion and backscatter. However, it is possible to digitally model this phenomenon and create a virtual image with those effects removed == Other application fields == Imaging sonars have become more and more accessible and gained resolution, delivering better images. Sidescan sonars are used to produce complete maps of regions of the sea floor stitching together sequences of sonar images. However, sonar images often lack proper contrast and are degraded by artefacts and distortions due to noise, attitude changes of the AUV/ROV carrying the sonar or non uniform beam patterns. Another common problem with sonar computer vision is the comparatively low frame rate of sonar images.
Association for Computational Linguistics
The Association for Computational Linguistics (ACL) is a scientific and professional organization for people working on natural language processing. Its namesake conference is one of the primary high impact conferences for natural language processing research, along with EMNLP. The conference is held each summer in locations where significant computational linguistics research is carried out. It was founded in 1962, originally named the Association for Machine Translation and Computational Linguistics (AMTCL). It became the ACL in 1968. The ACL has a European (EACL), a North American (NAACL), and an Asian (AACL) chapter. == History == The ACL was founded in 1962 as the Association for Machine Translation and Computational Linguistics (AMTCL). The initial membership was about 100. In 1965, the AMTCL took over the journal Mechanical Translation and Computational Linguistics. This journal was succeeded by many other journals: the American Journal of Computational Linguistics (1974–1978, 1980–1983), and then Computational Linguistics (1984–present). Since 1988, the journal has been published for the ACL by MIT Press. The annual meeting was first held in 1963 in conjunction with the Association for Computing Machinery National Conference. The annual meeting was, for a long time, relatively informal and did not publish anything longer than abstracts. By 1968, the society took on its current name, the Association for Computational Linguistics (ACL). The publication of the annual meeting's Proceedings of the ACL began in 1979 and gradually matured into its modern form. Many of the meetings were held in conjunction with the Linguistic Society of America, and a few with the American Society for Information Science and the Cognitive Science Society. The United States government sponsored much research from 1989 to 1994, characterized by an increase in author retention rates and an increase in research in some key topics, such as speech recognition, in ACL. By the 21st century, it was able to maintain authors at a high rate who coalesced in a more stable arrangement around individual research topics. In 1991, the group published a prototype for a text generator based on the universal grammar theory of Noam Chomsky. The system, nicknamed Parrot, relied on a finite set of syntactic transformations and a hand-curated lexicon. Despite some initial success, including experimentation with morpheme syntactics, funding halted after the research team encountered intractable difficulties with inflection and abstract locutions. == Annual Meeting of the ACL == Every year, the ACL holds the Annual Meeting of the ACL. The location lies in Europe in years zero modulo three, North America in years one modulo three, and Asia–Australia in years two modulo three. In 2020, the Annual Meeting received for the first time more submissions from China than the United States. == Activities == The ACL organizes several of the top conferences and workshops in the field of computational linguistics and natural language processing. These include: Annual Meeting of the Association for Computational Linguistics (ACL), the flagship conference of the organization Empirical Methods in Natural Language Processing (EMNLP) International Joint Conference on Natural Language Processing (IJCNLP), held jointly one of the other conferences on a rotating basis Conference on Computational Natural Language Learning (CoNLL) Lexical and Computational Semantics and Semantic Evaluation (SemEval) Joint Conference on Lexical and Computational Semantics (SEM) Workshop on Statistical Machine Translation (WMT) Besides conferences, the ACL also sponsors the journals Computational Linguistics and Transactions of the Association for Computational Linguistics (TACL). Papers and other presentations at ACL and ACL-affiliated venues are archived online in the open-access ACL Anthology. == Special Interest Groups == ACL has a large number of Special Interest Groups (SIGs), focusing on specific areas of natural language processing. Some current SIGs within ACL are: == Presidents == Each year, the ACL elects a distinguished computational linguist who becomes vice-president of the organization in the next calendar year and president one year later. Recent ACL presidents are:
Sentence extraction
Sentence extraction is a technique used for automatic summarization of a text. In this shallow approach, statistical heuristics are used to identify the most salient sentences of a text. Sentence extraction is a low-cost approach compared to more knowledge-intensive deeper approaches which require additional knowledge bases such as ontologies or linguistic knowledge. In short, sentence extraction works as a filter that allows only meaningful sentences to pass. The major downside of applying sentence-extraction techniques to the task of summarization is the loss of coherence in the resulting summary. Nevertheless, sentence extraction summaries can give valuable clues to the main points of a document and are frequently sufficiently intelligible to human readers. == Procedure == Usually, a combination of heuristics is used to determine the most important sentences within the document. Each heuristic assigns a (positive or negative) score to the sentence. After all heuristics have been applied, the highest-scoring sentences are included in the summary. The individual heuristics are weighted according to their importance. === Early approaches and some sample heuristics === Seminal papers which laid the foundations for many techniques used today have been published by Hans Peter Luhn in 1958 and H. P Edmundson in 1969. Luhn proposed to assign more weight to sentences at the beginning of the document or a paragraph. Edmundson stressed the importance of title-words for summarization and was the first to employ stop-lists in order to filter uninformative words of low semantic content (e.g. most grammatical words such as of, the, a). He also distinguished between bonus words and stigma words, i.e. words that probably occur together with important (e.g. the word form significant) or unimportant information. His idea of using key-words, i.e. words which occur significantly frequently in the document, is still one of the core heuristics of today's summarizers. With large linguistic corpora available today, the tf–idf value which originated in information retrieval, can be successfully applied to identify the key words of a text: If for example the word cat occurs significantly more often in the text to be summarized (TF = "term frequency") than in the corpus (IDF means "inverse document frequency"; here the corpus is meant by document), then cat is likely to be an important word of the text; the text may in fact be a text about cats.
Sahara Net
Sahara Net is an information and communications technology provider (ICT) serving the Saudi market, the company has rapidly grown since 1989 to offer various complementary services such as connectivity, internet, hosting, cloud, optimization, cyber security, and managed services. == History == Sahara Net is a Saudi Joint Stock Company (JSC) and its history goes back to 1989 when Sahara Net established the 1st Saudi Bulletin Board Service (BBS) in the Kingdom. During this period, it operated as a hub for email exchange in the FidoNet network. And in 1994 Sahara Net started offering Internet connectivity and other related services like internet email, web design, web hosting, and Domain name registry services. These services made the first ISP in Saudi Arabia before the official licensing in 1998, when the Saudi Internet market was regulated and Sahara Net received Internet Service Provider (ISP) license and was appointed as the official Local Internet Registry (LIR) in the Kingdom of Saudi Arabia. == Today == The company grew over these years to become one of the main ICTs in the Saudi Arabian market, extending network coverage to all major cities in Saudi Arabia, and offering various connectivity options to business as well as home users. In 2009, the company was partially acquired by Telindus (the ICT investment arm of Belgacom), the famous telecom operator in Belgium and Europe. Then, in 2014, the company was fully acquired by its original founders. Recently, Sahara Net was converted from an LLC to a JSC with over 1200 shareholders by a capital raise (original founders still control 70% of the shares).
BLOOM (language model)
The BigScience Large Open-science Open-access Multilingual Language Model (BLOOM) is an open-access large language model (LLM) released in 2022. It was created by a volunteer-driven research effort to provide a transparently-created alternative to proprietary AI models. With 176 billion parameters, BLOOM is a transformer-based autoregressive model designed to generate text in 46 natural languages and 13 programming languages. The model is distributed under the project's "Responsible AI License". == Development == BLOOM is the main outcome of the BigScience initiative, a one-year-long research workshop. The project was coordinated by Hugging Face using funding from the French government and involved several hundred volunteer researchers and engineers from academia and the private sector. The model was trained between March and July 2022 on the Jean Zay public supercomputer in France, managed by GENCI and IDRIS (CNRS). Unlike GPT-3, BLOOM was trained to be multilingual. The source code is released under the Apache 2.0 license. The model's parameters are released under BigScience's "Responsible AI License" (RAIL), which grants open access and reuse rights but with some usage restrictions. BLOOM was used in the chatbots BLOOMChat and HuggingChat due to its multilingual abilities. BLOOM's training corpus, named ROOTS, combines data extracted from the then-latest version of the web-based OSCAR corpus (38% of ROOTS) and newly collected data extracted from a manually selected and documented list of language data sources. In total, the model was trained on approximately 366 billion (1.6TB) tokens. It was developed using the open-source libraries DeepSpeed Megatron. BigScience then released xP3, a multilingual dataset for LLM supervised learning. It also released BLOOMZ, a variant of BLOOM fine-tuned on xP3 to follow instructions.