Research data archiving

Research data archiving is the long-term storage of scholarly research data, including the natural sciences, social sciences, and life sciences. The various academic journals have differing policies regarding how much of their data and methods researchers are required to store in a public archive, and what is actually archived varies widely between different disciplines. Similarly, the major grant-giving institutions have varying attitudes towards public archiving of data. In general, the tradition of science has been for publications to contain sufficient information to allow fellow researchers to replicate and therefore test the research. In recent years this approach has become increasingly strained as research in some areas depends on large datasets which cannot easily be replicated independently. Data archiving is more important in some fields than others. In a few fields, all of the data necessary to replicate the work is already available in the journal article. In drug development, a great deal of data is generated and must be archived so researchers can verify that the reports the drug companies publish accurately reflect the data. Often used interchangeably, Data preservation and data archiving are both about protecting data for the long term, but they serve different purposes. Data preservation focuses on preventing data from being lost, damaged, or destroyed by creating backups, storing data in secure locations, and ensuring it remains accessible when needed. Data archiving, on the other hand, involves moving data that is no longer actively used to a separate storage location for long-term keeping. Archived data is often combined and compressed, and while it can still be accessed, it is not intended for regular use or frequent updates. The requirement of data archiving is a recent development in the history of science. It was made possible by advances in information technology allowing large amounts of data to be stored and accessed from central locations. For example, the American Geophysical Union (AGU) adopted their first policy on data archiving in 1993, about three years after the beginning of the WWW. This policy mandates that datasets cited in AGU papers must be archived by a recognised data center; it permits the creation of "data papers"; and it establishes AGU's role in maintaining data archives. But it makes no requirements on paper authors to archive their data. Prior to organized data archiving, researchers wanting to evaluate or replicate a paper would have to request data and methods information from the author. The academic community expects authors to share supplemental data. This process was recognized as wasteful of time and energy and obtained mixed results. Information could become lost or corrupted over the years. In some cases, authors simply refuse to provide the information. The need for data archiving and due diligence is greatly increased when the research deals with health issues or public policy formation. == Selected policies by journals == === Biotropica === Biotropica requires, as a condition for publication, that the data supporting the results in the paper and metadata describing them must be archived in an appropriate public archive such as Dryad, Figshare, GenBank, TreeBASE, or NCBI. Authors may elect to make the data publicly available as soon as the article is published or, if the technology of the archive allows, embargo access to the data up to three years after article publication. A statement describing Data Availability will be included in the manuscript as described in the instructions to authors. Exceptions to the required archiving of data may be granted at the discretion of the Editor-in-Chief for studies that include sensitive information (e.g., the location of endangered species). Our Editorial explaining the motivation for this policy can be found here. A more comprehensive list of data repositories is available here. Promoting a culture of collaboration with researchers who collect and archive data: The data collected by tropical biologists are often long-term, complex, and expensive to collect. The Board of Editors of Biotropica strongly encourages authors who re-use data archives archived data sets to include as fully engaged collaborators the scientists who originally collected them. We feel this will greatly enhance the quality and impact of the resulting research by drawing on the data collector’s profound insights into the natural history of the study system, reducing the risk of errors in novel analyses, and stimulating the cross-disciplinary and cross-cultural collaboration and training for which the ATBC and Biotropica are widely recognized. NB: Biotropica is one of only two journals that pays the fees for authors depositing data at Dryad. === The American Naturalist === The American Naturalist requires authors to deposit the data associated with accepted papers in a public archive. For gene sequence data and phylogenetic trees, deposition in GenBank or TreeBASE, respectively, is required. There are many possible archives that may suit a particular data set, including the Dryad repository for ecological and evolutionary biology data. All accession numbers for GenBank, TreeBASE, and Dryad must be included in accepted manuscripts before they go to Production. If the data is deposited somewhere else, please provide a link. If the data is culled from published literature, please deposit the collated data in Dryad for the convenience of your readers. Any impediments to data sharing should be brought to the attention of the editors at the time of submission so that appropriate arrangements can be worked out. === Journal of Heredity === The primary data underlying the conclusions of an article are critical to the verifiability and transparency of the scientific enterprise, and should be preserved in usable form for decades in the future. For this reason, Journal of Heredity requires that newly reported nucleotide or amino acid sequences, and structural coordinates, be submitted to appropriate public databases (e.g., GenBank; the EMBL Nucleotide Sequence Database; DNA Database of Japan; the Protein Data Bank; and Swiss-Prot). Accession numbers must be included in the final version of the manuscript. For other forms of data (e.g., microsatellite genotypes, linkage maps, images), the Journal endorses the principles of the Joint Data Archiving Policy (JDAP) in encouraging all authors to archive primary datasets in an appropriate public archive, such as Dryad, TreeBASE, or the Knowledge Network for Biocomplexity. Authors are encouraged to make data publicly available at time of publication or, if the technology of the archive allows, opt to embargo access to the data for a period up to a year after publication. The American Genetic Association also recognizes the vast investment of individual researchers in generating and curating large datasets. Consequently, we recommend that this investment be respected in secondary analyses or meta-analyses in a gracious collaborative spirit. === Molecular Ecology === Molecular Ecology expects that data supporting the results in the paper should be archived in an appropriate public archive, such as GenBank, Gene Expression Omnibus, TreeBASE, Dryad, the Knowledge Network for Biocomplexity, your own institutional or funder repository, or as Supporting Information on the Molecular Ecology web site. Data are important products of the scientific enterprise, and they should be preserved and usable for decades in the future. Authors may elect to have the data publicly available at time of publication, or, if the technology of the archive allows, may opt to embargo access to the data for a period up to a year after publication. Exceptions may be granted at the discretion of the editor, especially for sensitive information such as human subject data or the location of endangered species. === Nature === Such material must be hosted on an accredited independent site (URL and accession numbers to be provided by the author), or sent to the Nature journal at submission, either uploaded via the journal's online submission service, or if the files are too large or in an unsuitable format for this purpose, on CD/DVD (five copies). Such material cannot solely be hosted on an author's personal or institutional web site. Nature requires the reviewer to determine if all of the supplementary data and methods have been archived. The policy advises reviewers to consider several questions, including: "Should the authors be asked to provide supplementary methods or data to accompany the paper online? (Such data might include source code for modelling studies, detailed experimental protocols or mathematical derivations.) === Science === Science supports the efforts of databases that aggregate published data for the use of the scientific community. Therefore, before publication, large data sets (including microarray data, protein or DNA sequences, and atomic c

Spectral shape analysis

Spectral shape analysis relies on the spectrum (eigenvalues and/or eigenfunctions) of the Laplace–Beltrami operator to compare and analyze geometric shapes. Since the spectrum of the Laplace–Beltrami operator is invariant under isometries, it is well suited for the analysis or retrieval of non-rigid shapes, i.e. bendable objects such as humans, animals, plants, etc. == Laplace == The Laplace–Beltrami operator is involved in many important differential equations, such as the heat equation and the wave equation. It can be defined on a Riemannian manifold as the divergence of the gradient of a real-valued function f: Δ f := div ⁡ grad ⁡ f . {\displaystyle \Delta f:=\operatorname {div} \operatorname {grad} f.} Its spectral components can be computed by solving the Helmholtz equation (or Laplacian eigenvalue problem): Δ φ i + λ i φ i = 0. {\displaystyle \Delta \varphi _{i}+\lambda _{i}\varphi _{i}=0.} The solutions are the eigenfunctions φ i {\displaystyle \varphi _{i}} (modes) and corresponding eigenvalues λ i {\displaystyle \lambda _{i}} , representing a diverging sequence of positive real numbers. The first eigenvalue is zero for closed domains or when using the Neumann boundary condition. For some shapes, the spectrum can be computed analytically (e.g. rectangle, flat torus, cylinder, disk or sphere). For the sphere, for example, the eigenfunctions are the spherical harmonics. The most important properties of the eigenvalues and eigenfunctions are that they are isometry invariants. In other words, if the shape is not stretched (e.g. a sheet of paper bent into the third dimension), the spectral values will not change. Bendable objects, like animals, plants and humans, can move into different body postures with only minimal stretching at the joints. The resulting shapes are called near-isometric and can be compared using spectral shape analysis. == Discretizations == Geometric shapes are often represented as 2D curved surfaces, 2D surface meshes (usually triangle meshes) or 3D solid objects (e.g. using voxels or tetrahedra meshes). The Helmholtz equation can be solved for all these cases. If a boundary exists, e.g. a square, or the volume of any 3D geometric shape, boundary conditions need to be specified. Several discretizations of the Laplace operator exist (see Discrete Laplace operator) for the different types of geometry representations. Many of these operators do not approximate well the underlying continuous operator. == Spectral shape descriptors == === ShapeDNA and its variants === The ShapeDNA is one of the first spectral shape descriptors. It is the normalized beginning sequence of the eigenvalues of the Laplace–Beltrami operator. Its main advantages are the simple representation (a vector of numbers) and comparison, scale invariance, and in spite of its simplicity a very good performance for shape retrieval of non-rigid shapes. Competitors of shapeDNA include singular values of Geodesic Distance Matrix (SD-GDM) and Reduced BiHarmonic Distance Matrix (R-BiHDM). However, the eigenvalues are global descriptors, therefore the shapeDNA and other global spectral descriptors cannot be used for local or partial shape analysis. === Global point signature (GPS) === The global point signature at a point x {\displaystyle x} is a vector of scaled eigenfunctions of the Laplace–Beltrami operator computed at x {\displaystyle x} (i.e. the spectral embedding of the shape). The GPS is a global feature in the sense that it cannot be used for partial shape matching. === Heat kernel signature (HKS) === The heat kernel signature makes use of the eigen-decomposition of the heat kernel: h t ( x , y ) = ∑ i = 0 ∞ exp ⁡ ( − λ i t ) φ i ( x ) φ i ( y ) . {\displaystyle h_{t}(x,y)=\sum _{i=0}^{\infty }\exp(-\lambda _{i}t)\varphi _{i}(x)\varphi _{i}(y).} For each point on the surface the diagonal of the heat kernel h t ( x , x ) {\displaystyle h_{t}(x,x)} is sampled at specific time values t j {\displaystyle t_{j}} and yields a local signature that can also be used for partial matching or symmetry detection. === Wave kernel signature (WKS) === The WKS follows a similar idea to the HKS, replacing the heat equation with the Schrödinger wave equation. === Improved wave kernel signature (IWKS) === The IWKS improves the WKS for non-rigid shape retrieval by introducing a new scaling function to the eigenvalues and aggregating a new curvature term. === Spectral graph wavelet signature (SGWS) === SGWS is a local descriptor that is not only isometric invariant, but also compact, easy to compute and combines the advantages of both band-pass and low-pass filters. An important facet of SGWS is the ability to combine the advantages of WKS and HKS into a single signature, while allowing a multiresolution representation of shapes. == Spectral Matching == The spectral decomposition of the graph Laplacian associated with complex shapes (see Discrete Laplace operator) provides eigenfunctions (modes) which are invariant to isometries. Each vertex on the shape could be uniquely represented with a combinations of the eigenmodal values at each point, sometimes called spectral coordinates: s ( x ) = ( φ 1 ( x ) , φ 2 ( x ) , … , φ N ( x ) ) for vertex x . {\displaystyle s(x)=(\varphi _{1}(x),\varphi _{2}(x),\ldots ,\varphi _{N}(x)){\text{ for vertex }}x.} Spectral matching consists of establishing the point correspondences by pairing vertices on different shapes that have the most similar spectral coordinates. Early work focused on sparse correspondences for stereoscopy. Computational efficiency now enables dense correspondences on full meshes, for instance between cortical surfaces. Spectral matching could also be used for complex non-rigid image registration, which is notably difficult when images have very large deformations. Such image registration methods based on spectral eigenmodal values indeed capture global shape characteristics, and contrast with conventional non-rigid image registration methods which are often based on local shape characteristics (e.g., image gradients).

Dynamic topic model

Within statistics, Dynamic topic models' are generative models that can be used to analyze the evolution of (unobserved) topics of a collection of documents over time. This family of models was proposed by David Blei and John Lafferty and is an extension to Latent Dirichlet Allocation (LDA) that can handle sequential documents. In LDA, both the order the words appear in a document and the order the documents appear in the corpus are oblivious to the model. Whereas words are still assumed to be exchangeable, in a dynamic topic model the order of the documents plays a fundamental role. More precisely, the documents are grouped by time slice (e.g.: years) and it is assumed that the documents of each group come from a set of topics that evolved from the set of the previous slice. == Topics == Similarly to LDA and pLSA, in a dynamic topic model, each document is viewed as a mixture of unobserved topics. Furthermore, each topic defines a multinomial distribution over a set of terms. Thus, for each word of each document, a topic is drawn from the mixture and a term is subsequently drawn from the multinomial distribution corresponding to that topic. The topics, however, evolve over time. For instance, the two most likely terms of a topic at time t could be "network" and "Zipf" (in descending order) while the most likely ones at time t+1 could be "Zipf" and "percolation" (in descending order). == Model == Define α t {\displaystyle \alpha _{t}} as the per-document topic distribution at time t. β t , k {\displaystyle \beta _{t,k}} as the word distribution of topic k at time t. η t , d {\displaystyle \eta _{t,d}} as the topic distribution for document d in time t, z t , d , n {\displaystyle z_{t,d,n}} as the topic for the nth word in document d in time t, and w t , d , n {\displaystyle w_{t,d,n}} as the specific word. In this model, the multinomial distributions α t + 1 {\displaystyle \alpha _{t+1}} and β t + 1 , k {\displaystyle \beta _{t+1,k}} are generated from α t {\displaystyle \alpha _{t}} and β t , k {\displaystyle \beta _{t,k}} , respectively. Even though multinomial distributions are usually written in terms of the mean parameters, representing them in terms of the natural parameters is better in the context of dynamic topic models. The former representation has some disadvantages due to the fact that the parameters are constrained to be non-negative and sum to one. When defining the evolution of these distributions, one would need to assure that such constraints were satisfied. Since both distributions are in the exponential family, one solution to this problem is to represent them in terms of the natural parameters, that can assume any real value and can be individually changed. Using the natural parameterization, the dynamics of the topic model are given by β t , k | β t − 1 , k ∼ N ( β t − 1 , k , σ 2 I ) {\displaystyle \beta _{t,k}|\beta _{t-1,k}\sim N(\beta _{t-1,k},\sigma ^{2}I)} and α t | α t − 1 ∼ N ( α t − 1 , δ 2 I ) {\displaystyle \alpha _{t}|\alpha _{t-1}\sim N(\alpha _{t-1},\delta ^{2}I)} . The generative process at time slice 't' is therefore: Draw topics β t , k | β t − 1 , k ∼ N ( β t − 1 , k , σ 2 I ) ∀ k {\displaystyle \beta _{t,k}|\beta _{t-1,k}\sim N(\beta _{t-1,k},\sigma ^{2}I)\forall k} Draw mixture model α t | α t − 1 ∼ N ( α t − 1 , δ 2 I ) {\displaystyle \alpha _{t}|\alpha _{t-1}\sim N(\alpha _{t-1},\delta ^{2}I)} For each document: Draw η t , d ∼ N ( α t , a 2 I ) {\displaystyle \eta _{t,d}\sim N(\alpha _{t},a^{2}I)} For each word: Draw topic Z t , d , n ∼ Mult ( π ( η t , d ) ) {\displaystyle Z_{t,d,n}\sim {\textrm {Mult}}(\pi (\eta _{t,d}))} Draw word W t , d , n ∼ Mult ( π ( β t , Z t , d , n ) ) {\displaystyle W_{t,d,n}\sim {\textrm {Mult}}(\pi (\beta _{t,Z_{t,d,n}}))} where π ( x ) {\displaystyle \pi (x)} is a mapping from the natural parameterization x to the mean parameterization, namely π ( x i ) = exp ⁡ ( x i ) ∑ i exp ⁡ ( x i ) {\displaystyle \pi (x_{i})={\frac {\exp(x_{i})}{\sum _{i}\exp(x_{i})}}} . == Inference == In the dynamic topic model, only W t , d , n {\displaystyle W_{t,d,n}} is observable. Learning the other parameters constitutes an inference problem. Blei and Lafferty argue that applying Gibbs sampling to do inference in this model is more difficult than in static models, due to the nonconjugacy of the Gaussian and multinomial distributions. They propose the use of variational methods, in particular, the Variational Kalman Filtering and the Variational Wavelet Regression. == Applications == In the original paper, a dynamic topic model is applied to the corpus of Science articles published between 1881 and 1999 aiming to show that this method can be used to analyze the trends of word usage inside topics. The authors also show that the model trained with past documents is able to fit documents of an incoming year better than LDA. A continuous dynamic topic model was developed by Wang et al. and applied to predict the timestamp of documents. Going beyond text documents, dynamic topic models were used to study musical influence, by learning musical topics and how they evolve in recent history.

Jiaya Jia

Jiaya Jia (Chinese: 贾佳亚) is a Chair Professor of the Department of Computer Science and Engineering at The Hong Kong University of Science and Technology (HKUST). He is an IEEE Fellow, the associate editor-in-chief of one of IEEE’s flagship and premier journals- Transactions on Pattern Analysis and Machine Intelligence (TPAMI), as well as on the editorial board of International Journal of Computer Vision (IJCV). == Early life and education == Jiaya Jia joined CUHK in 2004 as an assistant professor, and was promoted to full professor in 2015. He obtained his PhD degree in computer science jointly from Hong Kong University of Science and Technology and Microsoft Research in 2004. From March 2003 to August 2004, he was a visiting scholar at Microsoft. He conducted collaborative research at Adobe Research in 2007. == Career == Jiaya Jia is a distinguished scientist in the fields of computer vision and artificial intelligence. His research team at HKUST, DV Lab, is one of the largest vision AI research teams in the world and has been making significant contribution to advanced development of computer vision algorithms and technologies with focuses on image/video understanding, detection and segmentation, multi-modal AI, computational imaging, practical optimization, and advanced learning for visual content since 2000. Jiaya Jia has published 200+ top papers and was cited 80,000+ times on Google Scholar with H-Index 110+. 40+ PhDs and fellows from this group are now active in academia and industry, and have become prominent AI tech leaders as professors, directors in major research labs, and founders of several successful startups. Jiaya Jia assumes the position of associate editor-in-chief of IEEE Transactions on Pattern Analysis and Machine Intelligence (TPAMI) since 2021. He is also on the editorial board of International Journal of Computer Vision (IJCV). Jiaya Jia has served as the area chair of ICCV, CVPR, AAAI, ECCV, and several other premium international AI conferences for years. He was on program committees of major conferences in graphics and computational imaging, including ICCP, SIGGRAPH, and SIGGRAPH Asia. == Research == The research areas of Jiaya Jia are computer vision, large X models, and deep learning. Jiaya Jia has made outstanding contributions to computer vision technology, algorithms and engineering, and is among the world's leading experts in the field. His research partners include numerous renowned multinational technology companies, such as Microsoft, Qualcomm, Adobe, Intel, NVIDIA, Amazon, and Lenovo. Jia has cultivated a number of outstanding talents with Master's and PhDs who continue to engage in scientific research and development in computer vision. Many technologies in image analysis and processing developed by Jiaya Jia are still leading in the field worldwide. Wherein, his achievements in image deblurring, filtering, image sparse processing, multi-band image signal fusion and enhancement, large range motion estimation, texture and structure-based layering, etc. have been published in the industry's most influential conferences and publications, and implemented in the real-world applications. These achievements have demonstrated outstanding performance in established systems, and most of which are open source so as to enable wider applications across industries such as aviation, medical imaging, safety management, robotic design, meteorological analysis and many more. == Selected publications == In his over 20 years of research experience, Jiaya Jia has published 200+ top papers that have been cited more than 80,000 times. According to HKUST Website in August 2024, Jiaya Jia has accumulatively published over 200 scientific papers in books, journals and conferences, such as IEEE Transactions on Pattern Analysis and Machine Intelligence (TPAMI), International Journal of Computer Vision (IJCV) "Computer Vision and Pattern Recognition (CVPR)", and "International Conference on Computer Vision (ICCV)". Representative papers include: Jiaya Jia: Mathematical Models and Practical Solvers for Uniform Motion Deblurring (in Motion Deblurring: Algorithms and Systems), Cambridge University Press, ISBN 9781107044364, 2014; Jiaya Jia: “Matte Extraction” Book: Computer Vision - A Reference Guide, Springer, ISBN 9780387307718 Editor-in-chief: Ikeuchi, Katsushi; Jiaya Jia, Chi-Keung Tang：Image Stitching Using Structure Deformation，IEEE Transactions on Pattern Analysis and Machine Intelligence (TPAMI), Vol. 30, No. 4, 2008; Jiaya Jia, Jian Sun, Chi-Keung Tang, Heung-Yeung Shum：Drag-and-Drop Pasting，ACM Transactions on Graphics (also in SIGGRAPH 2006), Vol. 25, No. 3, 2006. Xiaojuan Qi, Zheng zhe Liu, Renjie Liao, Philip HS Torr, Raquel Urtasun, Jiaya Jia：GeoNet++: Iterative Geometric Neural Network with Edge-Aware Refinement for Joint Depth and Surface Normal Estimation，IEEE Transactions on Pattern Analysis and Machine Intelligence (TPAMI). Accepted. == Selected honors and awards == ACM Fellow. 1st Place of WAD Drivable Area Segmentation Challenge 2018; 1st Place of LSUN'17 Instance and Semantic Segmentation Challenges; 1st Place of COCO Instance Segmentation Challenge 2017; 2nd Place in COCO Detection Challenge 2017; 1st Place of ImageNet Scene Parsing Challenge 2016 with the paper PSPNet presented in CVPR 2017.

Top 10 AI Art Generators Compared (2026)

Shopping for the best AI art generator? An AI art generator is software that uses machine learning to help you get more done — it keeps getting smarter as the underlying models improve. Pricing, accuracy, and the size of the model behind the tool are the three factors that most affect daily usefulness. Whether you are a beginner or a pro, the right AI art generator slots into your workflow and pays for itself fast. Below we compare features, pricing, and real output so you can choose with confidence.

Douglas Parkhill

Douglas F. Parkhill is a Canadian technologist and former research minister, best known for his pioneering work on what is now called cloud computing, and his work on Canada's Telidon videotex project. He started working at the Canadian ministry of Communications (now part of the Department of Trade and Industry) in 1969, having previously worked at the Mitre Corporation. He was responsible for many activities in communications satellites, computer communications, command and control systems and telecommunications. He was winner of the Treasury Board of Canada Secretariat's Outstanding Achievement award in 1982, the Conestoga shield for services to government and industry in computer communications research and development, the Touche Ross award for Telidon development. He was an author of several publications including the 1966 book, The Challenge of the Computer Utility. In the book, Parkhill thoroughly explored many of the modern-day characteristics of cloud computing (elastic provisioning through a utility service) as well as the comparison to the electricity industry and the use of public, private, government and community forms. The book won the McKinsey Foundation award for distinguished contributions to management literature. He worked with Dave Godfrey, the Canadian writer and novelist on a later book Gutenberg two about the social and political meaning of computer technology. He was in charge of research at the Federal Department of Communications at the time when the department was funding development of the Telidon videotext system, was heavily involved in promoting the system, and had overall control of the program. In a radio broadcast in 1980, he outlined some of the potential of the system, from financial information, to theatre reservations, with the ability to pay and print out tickets from the system. He later documented the history of the Telidon project, and the history of videotext in general. == Publications == The Challenge of the Computer Utility, Addison-Wesley, 1966, ISBN 0-201-05720-4 edited with Dave Godfrey, Gutenberg Two: The New Electronics and Social Change, Press Porcepic, 1979, ISBN 0-88878-191-1 The Beginning of a Beginning. Ottawa; Department of Communications, 1987. A history of the Telidon project.

ISO 2033

The ISO 2033:1983 standard ("Coding of machine readable characters (MICR and OCR)") defines character sets for use with Optical Character Recognition or Magnetic Ink Character Recognition systems. The Japanese standard JIS X 9010:1984 ("Coding of machine readable characters (OCR and MICR)", originally designated JIS C 6229-1984) is closely related. == Character set for OCR-A == The version of the encoding for the OCR-A font registered with the ISO-IR registry as ISO-IR-91 is the Japanese (JIS X 9010 / JIS C 6229) version, which differs from the encoding defined by ISO 2033 only in the addition of a Yen sign at 5C. == Character set for OCR-B == The version of the G0 set for the OCR-B font registered with the ISO-IR registry as ISO-IR-92 is the Japanese (JIS X 9010 / JIS C 6229) version, which differs from the encoding defined by ISO 2033 only in being based on JIS-Roman (with a dollar sign at 0x24 and a Yen sign at 0x5C) rather than on the ISO 646 IRV (with a backslash at 0x5C and, at the time, a universal currency sign (¤) at 0x24). Besides those code points, it differs from ASCII only in omitting the backtick (`) and tilde (~). An additional supplementary set registered as ISO-IR-93 assigns the pound sign (£), universal currency sign (¤) and section sign (§) to their ISO-8859-1 codepoints, and the backslash to the ISO-8859-1 codepoint for the Yen sign. == Character set for JIS X 9008 (JIS C 6257) == JIS X 9010 (JIS C 6229) also defines character sets for the JIS X 9008:1981 (formerly JIS C 6257-1981) "hand-printed" OCR font. These include subsets of the JIS X 0201 Roman set (registered as ISO-IR-94 and omitting the backtick (`), lowercase letters, curly braces ({, }) and overline (‾)), and kana set (registered as ISO-IR-96 and omitting the East Asian style comma (､) and full stop (｡), the interpunct (･) and the small kana), in addition to a set (registered as ISO-IR-95) containing only the backslash, which is assigned to the same code point as in ISO-IR-93. The JIS C 6527 font stylises the slash and backslash characters with a doubled appearance. The character names given are "Solidus" and "Reverse Solidus", matching the Unicode character names for the ASCII slash and backslash. However, the Unicode Optical Character Recognition block includes an additional code point for an "OCR Double Backslash" (⑊), although not for a double (forward) slash, although a double slash is available elsewhere, as U+2AFD ⫽ DOUBLE SOLIDUS OPERATOR. == Character set for E-13B == The ISO-IR-98 encoding defined by ISO 2033 encodes the character repertoire of the E13B font, as used with magnetic ink character recognition. Although ISO 2033 also specifies other encodings, the encoding for E-13B is the encoding referred to as ISO_2033_1983 by Perl libintl, and as ISO_2033-1983 or csISO2033 by the IANA. Other registered labels include iso-ir-98, its ISO-IR registration number, and simply e13b. The digits are preserved in their ASCII locations. Letters and symbols unavailable in the E13B font are omitted, while specialised punctuation for bank cheques included in the E13B font is added. The same symbols are available in Unicode in the Optical Character Recognition block.