Agent2Agent (A2A) is an open protocol that defines how artificial intelligence agents communicate with each other across different systems. It is intended to allow agents built by different vendors or frameworks to discover one another, exchange messages, and coordinate tasks. == History == The Agent2Agent protocol was announced by Google in April 2025 as an open standard for agent interoperability. In June 2025, Google transferred the protocol, its specification, and related software development kits to the Linux Foundation. The Linux Foundation established the Agent2Agent project to provide vendor-neutral governance. == Design == The A2A protocol supports communication between autonomous software agents operating across different platforms and organizations. It enables agents to discover one another and exchange structured messages without requiring shared internal state or proprietary integrations. A2A uses metadata documents, known as Agent Cards, to describe an agent's capabilities and how it can be accessed. These documents are exchanged using widely adopted web technologies such as HTTP and JSON-based messaging formats. A2A includes support for authentication and authorization to control which agents may participate in workflows. The protocol supports established security technologies including Transport Layer Security (TLS), JSON Web Tokens (JWTs), and OpenID Connect. A2A is often discussed alongside the Model Context Protocol (MCP). MCP focuses on connecting agents to tools and data sources, while A2A focuses on communication between agents themselves. == Adoption == At the time the Linux Foundation adopted the protocol, more than 100 technology companies had announced support for the Agent2Agent project. Microsoft stated that it planned to support the protocol in its AI platforms. == Reception == Technology press coverage has described A2A as an attempt to reduce fragmentation in AI agent ecosystems by providing a shared communication layer. TechRepublic characterized the protocol as part of a broader industry effort to reduce vendor lock-in for enterprise AI systems.
Sentence extraction
Sentence extraction is a technique used for automatic summarization of a text. In this shallow approach, statistical heuristics are used to identify the most salient sentences of a text. Sentence extraction is a low-cost approach compared to more knowledge-intensive deeper approaches which require additional knowledge bases such as ontologies or linguistic knowledge. In short, sentence extraction works as a filter that allows only meaningful sentences to pass. The major downside of applying sentence-extraction techniques to the task of summarization is the loss of coherence in the resulting summary. Nevertheless, sentence extraction summaries can give valuable clues to the main points of a document and are frequently sufficiently intelligible to human readers. == Procedure == Usually, a combination of heuristics is used to determine the most important sentences within the document. Each heuristic assigns a (positive or negative) score to the sentence. After all heuristics have been applied, the highest-scoring sentences are included in the summary. The individual heuristics are weighted according to their importance. === Early approaches and some sample heuristics === Seminal papers which laid the foundations for many techniques used today have been published by Hans Peter Luhn in 1958 and H. P Edmundson in 1969. Luhn proposed to assign more weight to sentences at the beginning of the document or a paragraph. Edmundson stressed the importance of title-words for summarization and was the first to employ stop-lists in order to filter uninformative words of low semantic content (e.g. most grammatical words such as of, the, a). He also distinguished between bonus words and stigma words, i.e. words that probably occur together with important (e.g. the word form significant) or unimportant information. His idea of using key-words, i.e. words which occur significantly frequently in the document, is still one of the core heuristics of today's summarizers. With large linguistic corpora available today, the tf–idf value which originated in information retrieval, can be successfully applied to identify the key words of a text: If for example the word cat occurs significantly more often in the text to be summarized (TF = "term frequency") than in the corpus (IDF means "inverse document frequency"; here the corpus is meant by document), then cat is likely to be an important word of the text; the text may in fact be a text about cats.
Talking Angela
Talking Angela is a mobile game (formerly a chatbot), developed by Slovenian studio Outfit7 as part of the Talking Tom & Friends series. It was released on 13 November 2012 and December 2012 for iPhone, iPod and iPad, January 2013 for Android, and January 2014 for Google Play. The game's successor, the My Talking Angela game, was released in December 2014. The game takes place in a café in Paris and allows players to interact with Angela, an anthropomorphic white cat in different ways. Players can use coins to purchase makeup, accessories and items, as well as drinks that will trigger different visual effects. The fortune cookie button causes Angela to read out a fortune cookie, while the bird icon will prompt birds to fly around the screen, or have Angela feed them. Players can also pet or poke Angela, as well the café's sign. Prior to their removal, the game featured a chat system and a camera button. Users can engage in conversations with Angela, ask for quizzes or initiate a short snippet of the song "That's Falling In Love". If the player was to type in "Who is an idiot?", Angela would respond with a random swear word. Additionally, inquiring Angela about sexual topics would cause her to reply with "Do you want to talk about sex?", though she will quickly change the topic regardless of what the player writes next. A hoax claiming that Angela's eyes were hidden cameras that enabled hackers or paedophiles to watch children was spread. Despite the claims, Snopes and The Guardian found no evidence. Due to the hoax, Angela received a blue dress, as well as an altered eye asset with a different reflection, and later the chat and camera functions were removed altogether. == Hoaxes == In February 2014, Talking Angela was the subject of an Internet hoax alleging that the application was a front for child predators to exploit children. The rumor, which was widely circulated on Facebook and various websites claiming to be dedicated to parenting, claims that a sinister sexual predator or hacker, asked children for private personal information using the game's text-chat feature. Other versions of the rumour even attributed the disappearance of a child to the game; one news report claimed that a seven year old boy disappeared after downloading the app. Another variation included that it was run by a paedophile ring, citing a man that could be seen in Angela's eyes. The app's developers, Outfit7, later gave a statement refuting the hoaxes. The hoax was eventually debunked by Snopes, a fact-checking website. The site's owners, Barbara and David Mikkelson, reported that they had tried to "prompt" it to give responses asking for private information, but were unsuccessful, even when asking it explicitly sexual questions. While it is true that, in the game with child mode off, Angela does ask for the user's name, age and personal preferences to determine conversation topics, Outfit7 has said that this information is all "anonymized" and all personal information is removed from it. It is also impossible for a person to take control of what Angela says in the game, since the game is based on chatbot software. When the mode was turned on, the chat feature was disabled, meaning no personal questions could be asked. In 2015, the hoax was revived on Facebook, which prompted online security company Sophos and The Guardian to debunk it again. Sophos employee Paul Ducklin wrote that the message being posted on Facebook promoting the hoax was "close to 600 rambling, repetitious words, despite claiming at the start that it didn't have words to describe the situation. It's ill-written, and borders on being illiterate and incomprehensible." Bruce Wilcox, one of the game's programmers, attributed the hoax's popularity to the fact that the chatbot program in Talking Angela aimed to sound realistic. Concern was raised that the game's child mode may have been too easy for children to turn off. It allowed them to purchase "coins", premium currency in the game, via iTunes, and enabled the chat feature. While not "connecting your children to paedophiles", this still raised concerns according to The Guardian. === Impact === The scare significantly boosted the game's popularity, and was credited with helping the app enter the top 10 free iPhone apps soon after the hoax became widely known in February 2015,In the truth the reason there is a man in Angela’s eyes is because of pareidoila, the ability to see through diamonds and other minerals and water bodies and shiny objects,which is the reason why players notice a man in her eyes,The truth is that being Angela’s eyes simply serve as a reflective surface,Because of the low quality of this reflection the reflection was mistaken for a humanoid figure. oref>Smith, Josh (19 February 2014). "Talking Angela App Scare Skyrockets App to Top of Charts". GottaBeMobile.com. Archived from the original on 2 April 2016. Retrieved 10 May 2014. and third most popular for all iPhone apps at the start of the following month. In 2016, Outfit7 removed the chat feature along with the camera function from the app due to this controversy, though this decision was met with criticism.
Inception (deep learning architecture)
Inception is a family of convolutional neural network (CNN) for computer vision, introduced by researchers at Google in 2014 as GoogLeNet (later renamed Inception v1). The series was historically important as an early CNN that separates the stem (data ingest), body (data processing), and head (prediction), an architectural design that persists in all modern CNN. == Version history == === Inception v1 === In 2014, a team at Google developed the GoogLeNet architecture, an instance of which won the ImageNet Large-Scale Visual Recognition Challenge 2014 (ILSVRC14). The name came from the LeNet of 1998, since both LeNet and GoogLeNet are CNNs. They also called it "Inception" after a "we need to go deeper" internet meme, a phrase from Inception (2010) the film. Because later, more versions were released, the original Inception architecture was renamed again as "Inception v1". The models and the code were released under Apache 2.0 license on GitHub. The Inception v1 architecture is a deep CNN composed of 22 layers. Most of these layers were "Inception modules". The original paper stated that Inception modules are a "logical culmination" of Network in Network and (Arora et al, 2014). Since Inception v1 is deep, it suffered from the vanishing gradient problem. The team solved it by using two "auxiliary classifiers", which are linear-softmax classifiers inserted at 1/3-deep and 2/3-deep within the network, and the loss function is a weighted sum of all three: L = 0.3 L a u x , 1 + 0.3 L a u x , 2 + L r e a l {\displaystyle L=0.3L_{aux,1}+0.3L_{aux,2}+L_{real}} These were removed after training was complete. This was later solved by the ResNet architecture. The architecture consists of three parts stacked on top of one another: The stem (data ingestion): The first few convolutional layers perform data preprocessing to downscale images to a smaller size. The body (data processing): The next many Inception modules perform the bulk of data processing. The head (prediction): The final fully-connected layer and softmax produces a probability distribution for image classification. This structure is used in most modern CNN architectures. === Inception v2 === Inception v2 was released in 2015, in a paper that is more famous for proposing batch normalization. It had 13.6 million parameters. It improves on Inception v1 by adding batch normalization, and removing dropout and local response normalization which they found became unnecessary when batch normalization is used. === Inception v3 === Inception v3 was released in 2016. It improves on Inception v2 by using factorized convolutions. As an example, a single 5×5 convolution can be factored into 3×3 stacked on top of another 3×3. Both has a receptive field of size 5×5. The 5×5 convolution kernel has 25 parameters, compared to just 18 in the factorized version. Thus, the 5×5 convolution is strictly more powerful than the factorized version. However, this power is not necessarily needed. Empirically, the research team found that factorized convolutions help. It also uses a form of dimension-reduction by concatenating the output from a convolutional layer and a pooling layer. As an example, a tensor of size 35 × 35 × 320 {\displaystyle 35\times 35\times 320} can be downscaled by a convolution with stride 2 to 17 × 17 × 320 {\displaystyle 17\times 17\times 320} , and by maxpooling with pool size 2 × 2 {\displaystyle 2\times 2} to 17 × 17 × 320 {\displaystyle 17\times 17\times 320} . These are then concatenated to 17 × 17 × 640 {\displaystyle 17\times 17\times 640} . Other than this, it also removed the lowest auxiliary classifier during training. They found that the auxiliary head worked as a form of regularization. They also proposed label-smoothing regularization in classification. For an image with label c {\displaystyle c} , instead of making the model to predict the probability distribution δ c = ( 0 , 0 , … , 0 , 1 ⏟ c -th entry , 0 , … , 0 ) {\displaystyle \delta _{c}=(0,0,\dots ,0,\underbrace {1} _{c{\text{-th entry}}},0,\dots ,0)} , they made the model predict the smoothed distribution ( 1 − ϵ ) δ c + ϵ / K {\displaystyle (1-\epsilon )\delta _{c}+\epsilon /K} where K {\displaystyle K} is the total number of classes. === Inception v4 === In 2017, the team released Inception v4, Inception ResNet v1, and Inception ResNet v2. Inception v4 is an incremental update with even more factorized convolutions, and other complications that were empirically found to improve benchmarks. Inception ResNet v1 and v2 are both modifications of Inception v4, where residual connections are added to each Inception module, inspired by the ResNet architecture. === Xception === Xception ("Extreme Inception") was published in 2017. It is a linear stack of depthwise separable convolution layers with residual connections. The design was proposed on the hypothesis that in a CNN, the cross-channels correlations and spatial correlations in the feature maps can be entirely decoupled. Training each network took 3 days on 60 K80 GPUs, or approximately 0.5 petaFLOP-days.
Visual servoing
Visual servoing, also known as vision-based robot control and abbreviated VS, is a technique which uses feedback information extracted from a vision sensor (visual feedback) to control the motion of a robot. One of the earliest papers that talks about visual servoing was from the SRI International Labs in 1979. == Visual servoing taxonomy == There are two fundamental configurations of the robot end-effector (hand) and the camera: Eye-in-hand, or end-point open-loop control, where the camera is attached to the moving hand and observing the relative position of the target. Eye-to-hand, or end-point closed-loop control, where the camera is fixed in the world and observing the target and the motion of the hand. Visual Servoing control techniques are broadly classified into the following types: Image-based (IBVS) Position/pose-based (PBVS) Hybrid approach IBVS was proposed by Weiss and Sanderson. The control law is based on the error between current and desired features on the image plane, and does not involve any estimate of the pose of the target. The features may be the coordinates of visual features, lines or moments of regions. IBVS has difficulties with motions very large rotations, which has come to be called camera retreat. PBVS is a model-based technique (with a single camera). This is because the pose of the object of interest is estimated with respect to the camera and then a command is issued to the robot controller, which in turn controls the robot. In this case the image features are extracted as well, but are additionally used to estimate 3D information (pose of the object in Cartesian space), hence it is servoing in 3D. Hybrid approaches use some combination of the 2D and 3D servoing. There have been a few different approaches to hybrid servoing 2-1/2-D Servoing Motion partition-based Partitioned DOF Based == Survey == The following description of the prior work is divided into 3 parts Survey of existing visual servoing methods. Various features used and their impacts on visual servoing. Error and stability analysis of visual servoing schemes. === Survey of existing visual servoing methods === Visual servo systems, also called servoing, have been around since the early 1980s , although the term visual servo itself was only coined in 1987. Visual Servoing is, in essence, a method for robot control where the sensor used is a camera (visual sensor). Servoing consists primarily of two techniques, one involves using information from the image to directly control the degrees of freedom (DOF) of the robot, thus referred to as Image Based Visual Servoing (IBVS). While the other involves the geometric interpretation of the information extracted from the camera, such as estimating the pose of the target and parameters of the camera (assuming some basic model of the target is known). Other servoing classifications exist based on the variations in each component of a servoing system , e.g. the location of the camera, the two kinds are eye-in-hand and hand–eye configurations. Based on the control loop, the two kinds are end-point-open-loop and end-point-closed-loop. Based on whether the control is applied to the joints (or DOF) directly or as a position command to a robot controller the two types are direct servoing and dynamic look-and-move. Being one of the earliest works the authors proposed a hierarchical visual servo scheme applied to image-based servoing. The technique relies on the assumption that a good set of features can be extracted from the object of interest (e.g. edges, corners and centroids) and used as a partial model along with global models of the scene and robot. The control strategy is applied to a simulation of a two and three DOF robot arm. Feddema et al. introduced the idea of generating task trajectory with respect to the feature velocity. This is to ensure that the sensors are not rendered ineffective (stopping the feedback) for any the robot motions. The authors assume that the objects are known a priori (e.g. CAD model) and all the features can be extracted from the object. The work by Espiau et al. discusses some of the basic questions in visual servoing. The discussions concentrate on modeling of the interaction matrix, camera, visual features (points, lines, etc..). In an adaptive servoing system was proposed with a look-and-move servoing architecture. The method used optical flow along with SSD to provide a confidence metric and a stochastic controller with Kalman filtering for the control scheme. The system assumes (in the examples) that the plane of the camera and the plane of the features are parallel., discusses an approach of velocity control using the Jacobian relationship s˙ = Jv˙ . In addition the author uses Kalman filtering, assuming that the extracted position of the target have inherent errors (sensor errors). A model of the target velocity is developed and used as a feed-forward input in the control loop. Also, mentions the importance of looking into kinematic discrepancy, dynamic effects, repeatability, settling time oscillations and lag in response. Corke poses a set of very critical questions on visual servoing and tries to elaborate on their implications. The paper primarily focuses the dynamics of visual servoing. The author tries to address problems like lag and stability, while also talking about feed-forward paths in the control loop. The paper also, tries to seek justification for trajectory generation, methodology of axis control and development of performance metrics. Chaumette in provides good insight into the two major problems with IBVS. One, servoing to a local minima and second, reaching a Jacobian singularity. The author show that image points alone do not make good features due to the occurrence of singularities. The paper continues, by discussing the possible additional checks to prevent singularities namely, condition numbers of J_s and Jˆ+_s, to check the null space of ˆ J_s and J^T_s . One main point that the author highlights is the relation between local minima and unrealizable image feature motions. Over the years many hybrid techniques have been developed. These involve computing partial/complete pose from Epipolar Geometry using multiple views or multiple cameras. The values are obtained by direct estimation or through a learning or a statistical scheme. While others have used a switching approach that changes between image-based and position-based on a Lyapnov function. The early hybrid techniques that used a combination of image-based and pose-based (2D and 3D information) approaches for servoing required either a full or partial model of the object in order to extract the pose information and used a variety of techniques to extract the motion information from the image. used an affine motion model from the image motion in addition to a rough polyhedral CAD model to extract the object pose with respect to the camera to be able to servo onto the object (on the lines of PBVS). 2-1/2-D visual servoing developed by Malis et al. is a well known technique that breaks down the information required for servoing into an organized fashion which decouples rotations and translations. The papers assume that the desired pose is known a priori. The rotational information is obtained from partial pose estimation, a homography, (essentially 3D information) giving an axis of rotation and the angle (by computing the eigenvalues and eigenvectors of the homography). The translational information is obtained from the image directly by tracking a set of feature points. The only conditions being that the feature points being tracked never leave the field of view and that a depth estimate be predetermined by some off-line technique. 2-1/2-D servoing has been shown to be more stable than the techniques that preceded it. Another interesting observation with this formulation is that the authors claim that the visual Jacobian will have no singularities during the motions. The hybrid technique developed by Corke and Hutchinson, popularly called portioned approach partitions the visual (or image) Jacobian into motions (both rotations and translations) relating X and Y axes and motions related to the Z axis. outlines the technique, to break out columns of the visual Jacobian that correspond to the Z axis translation and rotation (namely, the third and sixth columns). The partitioned approach is shown to handle the Chaumette Conundrum discussed in. This technique requires a good depth estimate in order to function properly. outlines a hybrid approach where the servoing task is split into two, namely main and secondary. The main task is keep the features of interest within the field of view. While the secondary task is to mark a fixation point and use it as a reference to bring the camera to the desired pose. The technique does need a depth estimate from an off-line procedure. The paper discusses two examples for which depth estimates are obtained from robot odometry and by assuming that all
NASA AI Assisted-Air Quality Monitoring Project
The NASA Expert-System Ion Trap Mass Spectrometer (ES-ITMS) Project was a public-private partnership to develop an artificial intelligence assisted, air quality monitoring system and was qualified for use on the Space Shuttle. The partnership was also the first cost and intellectual property shared public-partnership implemented by NASA, which used the commercial Research and Development Limited Partnership (RDLP) model that had been adopted by the Reagan Administration for Department of Defense semiconductor development, and recommended for use by NASA for space commercialization. The project partners included NASA, the University of Florida and Finnigan MAT Corporation, was organized and administered by the NASA Joint Enterprise Institute (subsequently NASA Joint Sponsored Program) and ran from 1988 through 1990. The partnership concluded final testing in 1991, generating four patents, expert system software and application protocol reports. The system was space qualified for use on the Shuttle and elements of the ES-ITMS system were integrated into the product Improvements for Finnigan MAT corporation. The success of the partnership lead NASA to create a pilot program to develop partnership business models as an ongoing management practice. == Purpose and objectives == The need to monitor air quality in confined spaces represented an increasing challenge for NASA's planned space missions and private sector facility managers facing the increased scrutiny of possible air contaminants. Up to the early 1980's, air quality monitors generally required large spaces and human technicians to interpret readings. This created a need for miniaturized air quality monitors that could generate reliable and accurate analytic results without on-site technician presence. NASA initiated projects to develop..."mobile and/or portable mass spectrometers" that evaluated the "tradeoff between instrumentation capabilities and space, weight and power considerations." NASA selected a "commercial ITMS instrument capable of generating electron ionization, chemical ionization and mass spectrometry data", to develop a linked expert system to accomplish analysis without human intervention. The commercial instrumentation was from Finnigan MAT corporation while the scientific expertise to support expert system development was available at the University of Florida. The project managers at NASA Ames created a single, integrated project using the RDLP model with objectives to: Develop AI/expert system software for instrument control (NASA's role) Expand sensitivity, selectivity and speed of the spectrometer (Univ Florida role) Expand the spectrometer analytic capability and automate the screening (Finnigan role) == Membership == The partnership included seven specialists from five member organizations: Federal Government National Aeronautics and Space Administration (NASA) NASA Ames Research Center (ARC) NASA Kennedy Space Center (KSC) Commercial Finnigan MAT Corporation (Thermo-Fisher Scientific) TGS Technology, Inc. Research Management University of Florida == Organization, management and administration == The technical project was organized into two development teams, one located in at the NASA Ames Research Center covering expert systems and analytic capabilities and one in Florida covering improved sensitivity and testing. The partnership management and administration was provided by a non-profit, partnership support organization: the Joint Enterprise Institute operating through San Francisco State University Foundation (SFSUF) with a NASA employee liaison, Syed Shariq. == Public-private partnership == The partnership structure was as a prototype test of a pilot NASA program to develop public-private partnership business models. The pilot program was known as the NASA Joint Sponsored Research Program (JSRP), which operated as the NASA Joint Enterprise Institute between 1988 and 1991. The partnership was the first public-private, research and development partnership implemented by NASA in response to national policy shifts to increase technology transfer and space commercialization. The partnership structure included a two year technology development and testing plan that cost $610,000, of which NASA funded $310,000, Finnigan $175,000 and the University of Florida $95,000. == Results and commercialization == The project generated patents (4), software (2) and application protocol reports (8). NASA gained use of the patents and jointly development software while Finnigan received commercial utilization rights. The results were commercialized within eighteen months of project completion. == Recognition == NASA recognized the project as a space qualified instrument. Its achievements were reported to the NASA Administrator, directly leading to establishment of the agency-wide Joint Sponsored Research Program.
ACL Data Collection Initiative
The ACL Data Collection Initiative (ACL/DCI) was a project established in 1989 by the Association for Computational Linguistics (ACL) to create and distribute large text and speech corpora for computational linguistics research. The initiative aimed to address the growing need for substantial text databases that could support research in areas such as natural language processing, speech recognition, and computational linguistics. By 1993, the initiative’s activities had effectively ceased, with its functions and datasets absorbed by the Linguistic Data Consortium (LDC), which was founded in 1992. == Objectives == The ACL/DCI had several key objectives: To acquire a large and diverse text corpus from various sources To transform the collected texts into a common format based on the Standard Generalized Markup Language (SGML) To make the corpus available for scientific research at low cost with minimal restrictions To provide a common database that would allow researchers to replicate or extend published results To reduce duplication of effort among researchers in obtaining and preparing text data These objectives were designed to address the growing demand for very large amounts of text arising from applications in recognition and analysis of text and speech. Its core objective was to "oversee the acquisition and preparation of a large text corpus to be made available for scientific research at cost and without royalties". == History == By the late 1980s, researchers in computational linguistics and speech recognition faced a significant problem: the lack of large-scale, accessible text corpora for developing statistical models and testing algorithms. Existing generally available text databases were too small to meet the needs of developing applications in text and speech recognition. The initiative was formed to meet this need by collecting, standardizing, and distributing large quantities of text data with minimal restrictions for scientific research. As stated by Liberman (1990), "research workers have been severely hampered by the lack of appropriate materials, and specially by the lack of a large enough body of text on which published results can be replicated or extended by others." The ACL/DCI committee was established in February 1989. The committee included members from academic and industrial research laboratories in the United States and Europe. The initiative was chaired by Mark Liberman from the University of Pennsylvania (formerly of AT&T Bell Laboratories). Other committee members included representatives from organizations such as Bellcore, IBM T.J. Watson Research Center, Cambridge University, Virginia Polytechnic Institute & State University, Northeastern University, University of Pennsylvania, SRI International, MCC, Xerox PARC, ISSCO, and University of Pisa. The project operated initially without dedicated funding, relying on volunteer efforts from committee members and their affiliated institutions. Key supporters included AT&T Bell Labs, Bellcore, IBM, Xerox, and the University of Pennsylvania, which allowed the use of their computing facilities for ACL/DCI-related work. Previously running on volunteer effort pro bono, in 1991, it obtained funding from General Electric and the National Science Foundation (IRI-9113530). == Data == As of 1990, the ACL/DCI had collected hundreds of millions of words of diverse text. The collection included: Wall Street Journal articles (25 to 50 million words); Canadian Hansard (parliamentary records) in parallel English and French versions: cleaned-up English Hansard donated by the IBM alignment models group (100 million words), and original Bilingual Hansard (from a different time period) obtained directly (200 million words). Collins English Dictionary (1979 edition), both as fulltext (3 million words) and as various "database" versions, constructed using "typographers' tape" donated by Collins, which were computer tapes containing the structured digital data used to typeset and print the 1979 edition of the dictionary; Emails from ARPANET newsletters for the ACM Special Interest Group on Information Retrieval Forum (IRLIST) and AIList Digest issues distributed over the ARPANET (AILIST) (5 million words), both collected by Edward A. Fox at VIPSU; Articles on networking (2 million words); U.S. Department of Agriculture Extension Service Fact Sheets (>1 million words); 200,000 scientific abstracts of about 1,500 words each from the Department of Energy (25 million words); Archives of the Challenger Investigation Commission, including transcripts of depositions and hearings (2.5 million words); Books from the Library of America, including works by Mark Twain, Eugene O'Neill, Ralph Waldo Emerson, Herman Melville, W.E.B. DuBois, Willa Cather, and Benjamin Franklin (130 books, 20 million words); Public domain books like the King James Bible, Tristram Shandy, The Federalist Papers; Several million words of transcribed radiologists' reports, donated by Francis Ganong at Kurzweil Applied Intelligence Inc (about 5 million words); The Child Language Data Exchange corpus of child language acquisition transcripts; U.S. Department of Justice Justice Retrieval and Inquiry System (JURIS) materials; The Swiss Civil Code in parallel German, French and Italian; Economic reports from the Union Bank of Switzerland, in parallel English, German, French and Italian; About 12K words of administrative policy manuals and 14K words of administrative memos, contributed by Geoff Pullum of U.C.S.C.; Material from various ACM journals and the ACL journal Computational Linguistics; The CSLI publications series: 50-100 reports (8K words each) and 5-10 books (80K words each). The initiative started with North American English text but expanded to include Canadian French and planned to include Japanese, Chinese, and other Asian languages. At least 5 million words from the collection were tagged under the Penn Treebank project, and those tags were distributed by DCI as well. After DCI was absorbed by the LDC, the datasets were curated under LDC. == Format == The ACL/DCI corpus was coded in a standard form based on SGML (Standard Generalized Markup Language, ISO 8879), consistent with the recommendations of the Text Encoding Initiative (TEI), of which the DCI was an affiliated project. The TEI was a joint project of the ACL, the Association for Computers and the Humanities, and the Association for Literary and Linguistic Computing, aiming to provide a common interchange format for literary and linguistic data. The initiative planned to add annotations reflecting consensually approved linguistic features like part of speech and various aspects of syntactic and semantic structure over time. == Examples == As an example of the use of ACL/DCI, consider the Wall Street Journal (WSJ) corpus for speech recognition research. The WSJ corpus was used as the basis for the DARPA Spoken Language System (SLS) community's Continuous Speech Recognition (CSR) Corpus. The WSJ corpus became a standard benchmark for evaluating speech recognition systems and has been used in numerous research papers. The WSJ CSR Corpus provided DARPA with its first general-purpose English, large vocabulary, natural language, high perplexity corpus containing speech (400 hours) and text (47 million words) during 1987–89. The text corpus was 313 MB in size. The text was preprocessed to remove ambiguity in the word sequence that a reader might choose, ensuring that the unread text used to train language models was representative of the spoken test material. The preprocessing included converting numbers into orthographics, expanding abbreviations, resolving apostrophes and quotation marks, and marking punctuation. As another example, the Yarowsky algorithm used bitext data from DCI to train a simple word-sense disambiguation model that was competitive with advanced models trained on smaller datasets. == Distribution == Materials from the ACL/DCI collection were distributed to research groups on a non-commercial basis. By 1990, about 25 research groups and individual researchers had received tapes containing various portions of the collected material. To obtain the data, researchers had to sign an agreement not to redistribute the data or make direct commercial use of it. However, commercial application of "analytical materials" derived from the text, such as statistical tables or grammar rules, was explicitly permitted. The initiative first distributed data via 12-inch reels of 9-track tape, then via CD-ROMs. Each such tape could contain 30 million words compressed via the Lempel-Ziv algorithms. The first CD-ROM distribution was in 1991, funded by Dragon Systems Inc. It contained Collins English Dictionary, WSJ, scientific abstracts provided by the U.S. Department of Energy, and the Penn Treebank.