Diane Litman is an American professor of computer science at the University of Pittsburgh. She also jointly holds the positions of senior scientist with the Learning Research and Development Center and faculty with the Intelligent Systems department. Litman is noted for her work in the areas of artificial intelligence, computational linguistics, knowledge representation and reasoning, natural language processing, and user modeling. == Education == Litman did her undergraduate studies at the College of William and Mary and her master's and PhD degrees at the University of Rochester. == Career == Before joining the University of Pittsburgh, she was an assistant professor at Columbia University. She additionally held the position of a research scientist in the Artificial Intelligence Principles Research Department Laboratory at AT&T Labs. Litman has held the position of Chair of the North American Chapter of the Association for Computational Linguistics two times, elected twice for the position, whose tenure lasts four years. She is also a distinguished member of the executive committee of the Association for Computational Linguistics, and a member of the editorial boards of Computational Linguistics and User Modeling and User-Adapted Interaction. She has also held the position of Leverhulme Professor at the University of Edinburgh. Litman was the keynote speaker at the Speech and Language Technology in Education 2013 symposium, the 2006 SIGdial Meeting on Discourse and Dialogue, and at the 2008 Symposium of the Annual Meeting of the Society for the Study of Artificial Intelligence and Simulation of Behaviour. She also sits on the board of the several interest groups, including the International Speech Communication Association's Special Interest Group on Speech and Language Technology in Education. Litman has served as chair, organizer, and a senior member of numerous committees of peer-reviewed scientific journals. == Awards and recognition == She has also co-authored numerous award-winning papers and was awarded senior member status by the Association for the Advancement of Artificial Intelligence in 2011, an award designed to honor those who have "achieved significant accomplishments within the field of artificial intelligence."
Distributed Common Ground System
The Distributed Common Ground System (DCGS) is a system which produces military intelligence for multiple branches of the American military. == DCGS Programs == DCGS-N - DCGS for the United States Navy DCGS-A - DCGS for the United States Army AF DCGS - DCGS for the United States Air Force DCGS-MC - DCGS for the United States Marine Corps DCGS-SOF - DCGS for the United States Special Operations Forces IS&A Support Center - DCGS-A Help Desk for the United States Army - https://dcgsahelp.max.gov/ - Max.gov sunset 15 December 2023 == Description == While in U.S. Air Force use, the system produces intelligence collected by the U-2 Dragonlady, RQ-4 Global Hawk, MQ-9 Reaper and MQ-1 Predator. The previous system of similar use was the Deployable Ground Station (DGS), which was first deployed in July 1994. Subsequent version of DGS were developed from 1995 through 2009. Although officially designated a "weapons system", it consists of computer hardware and software connected together in a computer network, devoted to processing and dissemination of information such as images. The 480th Intelligence, Surveillance and Reconnaissance Wing of the Air Combat Command operates and maintains the USAF system. A plan envisioned in 1998 was to develop interoperable systems for the Army and Navy, in addition to the Air Force. By 2006, version 10.6 was deployed by the Air Force, and a version known as DCGS-A was developed for the Army. After a 2010 report by General Michael T. Flynn, the program was intended to use cloud computing and be as easy to use as an iPad, which soldiers over a few years were commonly using. By April 2011, project manager Colonel Charles Wells announced version 3 of the Army system (code named "Griffin") was being deployed in the US war in Afghanistan. In January 2012, the United States Army Communications-Electronics Research, Development and Engineering Center hosted a meeting based on the DCGS-A early experience. It brought together technology providers in the hope of developing more integrated systems using cloud computing with open architectures, compared to previously specialized custom-built systems. A major contractor was Lockheed Martin, with computers supplied by Silicon Graphics International out of its Chippewa Falls, Wisconsin office. Software known as the Analyst's Notebook, originally developed by i2 Limited, was included in DCGS-A. IBM acquired i2 in 2011. Some US Army personnel reported using a Palantir Technologies product to improve their ability to predict locations of improvised explosive devices. An April 2012 report recommending further study after initial success. Palantir software was rated easy to use, but did not have the flexibility and wide number of data sources of DCGS-A. In July 2012, Congressman Duncan D. Hunter (from California, the state where Palantir is based) complained of US DoD obstacles to its wider use. Although a limited test in August 2011 by the Test and Evaluation Command had recommended deployment, operation problems of DCGS-A included the baseline system was "not operationally effective" with reboots on average about every 8 hours. A set of improvements was identified in November 2012. The press reported some of the shortcomings uncovered by General Genaro Dellarocco in the tests. The ambitious goal of integrating 473 data sources for 75 million reports proved to be challenging, after spending an estimated $2.3 billion on the Army system alone. In May 2013 Politico reported that Palantir lobbyists and some anonymous returning veterans continued to advocate the use of its software, despite its interoperability limits. In particular, members of special forces and US Marines were not required to use the official Army system. Similar stories appeared in other publications, with Army representatives (such as Major General Mary A. Legere) citing the limitations of various systems. Congressman Hunter was a member of the House Armed Services Committee which required a review of the program, after two other members of congress sent an open letter to Secretary of Defense Leon Panetta. The Senate Defense Appropriations Subcommittee included testimony from Army Chief of Staff General Ray Odierno. The 130th Engineer Brigade (United States) has found the system to be "unstable, slow, not friendly and a major hindrance to operations". The equivalent system for the United States Navy was planned for initial deployment by 2015, and within a shipboard network called Consolidated Afloat Networks and Enterprise Services (CANES) by 2016. Some early testing was announced in 2009 aboard the aircraft carrier USS Harry Truman. A portion of the software, a distributed data framework for the DCGS integration backbone (DIB) version 4, was submitted to an open-source software repository of the Codice Foundation on GitHub. The framework was new for DIB version 4, replacing the legacy DIB portal with an Ozone Widget Framework interface. It was written in the Java programming language. == DCGS-A == Distributed Common Ground System-Army (DCGS-A) is the United States Army's primary system to post data, process information, and disseminate Intelligence, Surveillance and Reconnaissance (ISR) information about the threat, weather, and terrain to echelons. DCGS-A provides commanders the ability to task battle-space sensors and receive intelligence information from multiple sources. === Promotion === An August 17, 2011, UPI article quoted i2 Chief Executive Officer Robert Griffin who commented on DCGS-A's best-of-breed approach to development. The article detailed the Army contracting with i2 for Analyst's Notebook software. "With its open architecture, Analyst's Notebook supports the Army's strategy to employ and integrate best-of-breed solutions from across the industry to meet the dynamic needs users face in the field on a daily basis." A February 1, 2012, article in the Army web page quoted Mark Kitz, DCGS-A technical director. DCGS-A "uses the latest in cloud technology to rapidly gather, collaborate and share intelligence data from multiple sources to deliver a common operating picture. DCGS-A is able to rapidly adapt to changing operational environments by leveraging an iterative development model and open architecture allowing for collaboration with multiple government, industry and academic partners." A July 2012 article in SIGNAL Magazine, monthly publication of the Armed Forces Communications and Electronics Association, promoted DCGS-A as taking advantage of technological environments with which young soldiers are familiar. The article quoted the DCGS-A program manager, Col. Charles Wells on the systems benefits. The article also included Lockheed Martin's DCGS-A program manager. The Milwaukee Journal Sentinel published an article May 4, 2012, about Wisconsin-located companies helping DCGS-A with cloud computing technology. The article promoted the speed when cloud computing processes intelligence and cost savings by analyzing data in the field. === The U.S. Army's 2011 Posture Statement === The U.S. Army released its 2011 Army Posture Statement March 2. It included a statement on DCGS-A: “The Distributed Common Ground System-Army (DCGS-A) is the Army's premier intelligence, surveillance, and reconnaissance (ISR) enterprise for the tasking of sensors, analysis and processing of data, exploitation of data, and dissemination of intelligence (TPED) across all echelons. It is the Army component of the larger Defense Intelligence Information Enterprise (DI2E) and interoperable with other Service DCGS programs. Under the DI2E framework, USD (I) hopes to provide COCOM Joint Intelligence Operations Centers (JIOCs) capabilities interoperable with DCGS-A through a Cloud/widget approach. DCGS-A connects tactical, operational, and theater-level commanders to hundreds of intelligence and intelligence-related data sources at all classification levels and allows them to focus efforts of the entire ISR community on their information requirements. === Comparisons === Some Ground Commanders who describe DCGS-A as "unwieldy and unreliable, hard to learn and difficult to use," supporting alternative software from Palantir Technologies. Palantir software supports small unit situational awareness, but is not sufficiently funded to support the broader role that DCGS-A fulfills. == Operators == 480th Intelligence, Surveillance and Reconnaissance Wing 9th Intelligence Squadron 13th Intelligence Squadron 548th Intelligence, Surveillance and Reconnaissance Group 548 Operational Support Squadron 48th Intelligence Squadron 101st Intelligence Squadron 113th Air Support Operations Squadron 127th Command and Control Squadron 161st Intelligence Squadron
Template matching
Template matching is a technique in digital image processing for finding small parts of an image which match a template image. It can be used for quality control in manufacturing, navigation of mobile robots, or edge detection in images. The main challenges in a template matching task are detection of occlusion, when a sought-after object is partly hidden in an image; detection of non-rigid transformations, when an object is distorted or imaged from different angles; sensitivity to illumination and background changes; background clutter; and scale changes. == Feature-based approach == The feature-based approach to template matching relies on the extraction of image features, such as shapes, textures, and colors, that match the target image or frame. This approach is usually achieved using neural networks and deep-learning classifiers such as VGG, AlexNet, and ResNet.Convolutional neural networks (CNNs), which many modern classifiers are based on, process an image by passing it through different hidden layers, producing a vector at each layer with classification information about the image. These vectors are extracted from the network and used as the features of the image. Feature extraction using deep neural networks, like CNNs, has proven extremely effective has become the standard in state-of-the-art template matching algorithms. This feature-based approach is often more robust than the template-based approach described below. As such, it has become the state-of-the-art method for template matching, as it can match templates with non-rigid and out-of-plane transformations, as well as high background clutter and illumination changes. == Template-based approach == For templates without strong features, or for when the bulk of a template image constitutes the matching image as a whole, a template-based approach may be effective. Since template-based matching may require sampling of a large number of data points, it is often desirable to reduce the number of sampling points by reducing the resolution of search and template images by the same factor before performing the operation on the resultant downsized images. This pre-processing method creates a multi-scale, or pyramid, representation of images, providing a reduced search window of data points within a search image so that the template does not have to be compared with every viable data point. Pyramid representations are a method of dimensionality reduction, a common aim of machine learning on data sets that suffer the curse of dimensionality. == Common challenges == In instances where the template may not provide a direct match, it may be useful to implement eigenspaces to create templates that detail the matching object under a number of different conditions, such as varying perspectives, illuminations, color contrasts, or object poses. For example, if an algorithm is looking for a face, its template eigenspaces may consist of images (i.e., templates) of faces in different positions to the camera, in different lighting conditions, or with different expressions (i.e., poses). It is also possible for a matching image to be obscured or occluded by an object. In these cases, it is unreasonable to provide a multitude of templates to cover each possible occlusion. For example, the search object may be a playing card, and in some of the search images, the card is obscured by the fingers of someone holding the card, or by another card on top of it, or by some other object in front of the camera. In cases where the object is malleable or poseable, motion becomes an additional problem, and problems involving both motion and occlusion become ambiguous. In these cases, one possible solution is to divide the template image into multiple sub-images and perform matching on each subdivision. == Deformable templates in computational anatomy == Template matching is a central tool in computational anatomy (CA). In this field, a deformable template model is used to model the space of human anatomies and their orbits under the group of diffeomorphisms, functions which smoothly deform an object. Template matching arises as an approach to finding the unknown diffeomorphism that acts on a template image to match the target image. Template matching algorithms in CA have come to be called large deformation diffeomorphic metric mappings (LDDMMs). Currently, there are LDDMM template matching algorithms for matching anatomical landmark points, curves, surfaces, volumes. == Template-based matching explained using cross correlation or sum of absolute differences == A basic method of template matching sometimes called "Linear Spatial Filtering" uses an image patch (i.e., the "template image" or "filter mask") tailored to a specific feature of search images to detect. This technique can be easily performed on grey images or edge images, where the additional variable of color is either not present or not relevant. Cross correlation techniques compare the similarities of the search and template images. Their outputs should be highest at places where the image structure matches the template structure, i.e., where large search image values get multiplied by large template image values. This method is normally implemented by first picking out a part of a search image to use as a template. Let S ( x , y ) {\displaystyle S(x,y)} represent the value of a search image pixel, where ( x , y ) {\displaystyle (x,y)} represents the coordinates of the pixel in the search image. For simplicity, assume pixel values are scalar, as in a greyscale image. Similarly, let T ( x t , y t ) {\textstyle T(x_{t},y_{t})} represent the value of a template pixel, where ( x t , y t ) {\textstyle (x_{t},y_{t})} represents the coordinates of the pixel in the template image. To apply the filter, simply move the center (or origin) of the template image over each point in the search image and calculate the sum of products, similar to a dot product, between the pixel values in the search and template images over the whole area spanned by the template. More formally, if ( 0 , 0 ) {\displaystyle (0,0)} is the center (or origin) of the template image, then the cross correlation T ⋆ S {\displaystyle T\star S} at each point ( x , y ) {\displaystyle (x,y)} in the search image can be computed as: ( T ⋆ S ) ( x , y ) = ∑ ( x t , y t ) ∈ T T ( x t , y t ) ⋅ S ( x t + x , y t + y ) {\displaystyle (T\star S)(x,y)=\sum _{(x_{t},y_{t})\in T}T(x_{t},y_{t})\cdot S(x_{t}+x,y_{t}+y)} For convenience, T {\displaystyle T} denotes both the pixel values of the template image as well as its domain, the bounds of the template. Note that all possible positions of the template with respect to the search image are considered. Since cross correlation values are greatest when the values of the search and template pixels align, the best matching position ( x m , y m ) {\displaystyle (x_{m},y_{m})} corresponds to the maximum value of T ⋆ S {\displaystyle T\star S} over S {\displaystyle S} . Another way to handle translation problems on images using template matching is to compare the intensities of the pixels, using the sum of absolute differences (SAD) measure. To formulate this, let I S ( x s , y s ) {\displaystyle I_{S}(x_{s},y_{s})} and I T ( x t , y t ) {\displaystyle I_{T}(x_{t},y_{t})} denote the light intensity of pixels in the search and template images with coordinates ( x s , y s ) {\displaystyle (x_{s},y_{s})} and ( x t , y t ) {\displaystyle (x_{t},y_{t})} , respectively. Then by moving the center (or origin) of the template to a point ( x , y ) {\displaystyle (x,y)} in the search image, as before, the sum of absolute differences between the template and search pixel intensities at that point is: S A D ( x , y ) = ∑ ( x t , y t ) ∈ T | I T ( x t , y t ) − I S ( x t + x , y t + y ) | {\displaystyle SAD(x,y)=\sum _{(x_{t},y_{t})\in T}\left\vert I_{T}(x_{t},y_{t})-I_{S}(x_{t}+x,y_{t}+y)\right\vert } With this measure, the lowest SAD gives the best position for the template, rather than the greatest as with cross correlation. SAD tends to be relatively simple to implement and understand, but it also tends to be relatively slow to execute. A simple C++ implementation of SAD template matching is given below. == Implementation == In this simple implementation, it is assumed that the above described method is applied on grey images: This is why Grey is used as pixel intensity. The final position in this implementation gives the top left location for where the template image best matches the search image. One way to perform template matching on color images is to decompose the pixels into their color components and measure the quality of match between the color template and search image using the sum of the SAD computed for each color separately. == Speeding up the process == In the past, this type of spatial filtering was normally only used in dedicated hardware solutions because of the computational complexity of the operation, however we can lessen this complexity b
Sensory, Inc.
Sensory, Inc. is an American company which develops software AI technologies for speech, sound and vision. It is based in Santa Clara, California. Sensory’s technologies have shipped in over three billion products from hundreds of leading consumer electronics manufacturers including AT&T, Hasbro, Huawei, Google, Amazon, Samsung, LG, Mattel, Motorola, Plantronics, GoPro, Sony, Tencent, Garmin, LG, Microsoft, Lenovo, and more. Sensory has over 60 issued patents covering speech recognition in consumer electronics, biometric authentication, sensor/speech combinations, wake word technology, and more. == History == Sensory, Inc. was founded in 1994, originally as Sensory Circuits, by Forrest Mozer, Mike Mozer and Todd Mozer. The three had also co-founded ESS Technology years earlier. In 1999 Sensory acquired Fluent Speech Technologies, which was formed and started by a group of professors out of the Oregon Graduate Institute (formerly OGI, now OHSU). Fluent Speech Technologies developed high performance embedded speech engines, the technology from this acquisition is now the core technology used throughout Sensory's chip and software line. === Company timeline === 1994 – Founded 1995 – Introduces the RSC 164 - first commercially successful speech recognition IC 1998 – Introduces first speaker verification IC 2000 – Acquires Oregon based Fluent-Speech Technologies 2002 – Acquires Texas Instruments line of speech output ICs (the SC series) 2007 – Introduces first Voice User Interface for Bluetooth silicon (CSR BC-5) - BlueGenie 2008 - Sensory and BlueAnt partner on the V1 - Revolutionary new Bluetooth headset with a voice user interface. First wearable to use a voice user interface for control and best-reviewed speech recognition product in history 2009 – Introduced world's smallest text to speech system (TTS) and Truly HandsfreeTM Triggers/ wake words. 2010 – Introduced the NLP-5x – First Natural Language Voice Processor and TrulyHandsfree wake words in SDKs for Android, iOS, Linux, and Windows. NLP5x used the first generation of TrulyHandsfree wake words with low power and enhanced accuracy. 2011 – Sensory partners with Google and Microsoft to enable TrulyHandsfree as a front end to Goog411 and Bing411 2012 – Partnered with Tensilica to offer ultra-low power TrulyHandsfree wake words; introduced Speaker Verification and Speaker Identification for mobile phones and other consumer electronics. 2012 - TrulyHandsfree released into Samsung's Galaxy S2 for "Hey Galaxy" wake word 2013 – TrulyHandsfree wake words migrated to many new platforms and began shipping as MotoVoice in the Google-owned MotoX. Sensory's TrulyHandsfree in mobile takes off with the Galaxy S3 and S4 and Galaxy Note and is licensed into wearables like Google Glass. 2014 – Announced new initiative in Vision; added LG and Motorola as customers; received the 2014 Global Mobile Award for Best Mobile Technology Breakthrough at the GSMA Mobile World Congress in Barcelona, Spain (judges commented, "A big advance for the wearables market, this offers many benefits for consumers, increasing uptake and usage of many mobile apps, driving revenue for operators and content providers.") 2015-2018 - Licensed Google, Amazon, MSFT, Baidu, Huawei, ZTE, and many others with TrulyHandsfree wake words. Sensory develops first wake words for OK Google, Hey Siri, and Hey Cortana. 2019 - Sensory launched two new solutions: SoundID, sound identification, and TrulyNatural, embedded large vocabulary speech recognition. Sensory also acquired Vocalize.ai, an independent testing lab. 2020 - Sensory introduced VoiceHub, which allows the automated generation of wake words. 2021 - Sensory expands VoiceHub with speech recognition and NLU capabilities. The company initiated a new cloud platform, SensoryCloud.ai. 2022-Sensory rolls out SensoryCloud.ai with speech to text, text to speech, face & voice biometrics 2024- Sensory Automotive & TrulyNatural Speech-to-text On-Device launched == Technology and products == Sensory originally developed both hardware (Integrated Circuit - IC or "chip") and software platforms but migrated to software only around 2005 and added cloud and hybrid computing capabilities in 2021. Sensory's RSC-164 IC (Integrated Circuit or "chip") was used on NASA's Mars Polar Lander in the Mars Microphone on the Lander. Speech Synthesis SC-6x chips – acquired some speech synthesis technology from Texas Instruments. Sensory’s embedded AI solutions include the following: TrulyHandsfree (THF) - wake word detection and phrase spotting. TrulyNatural (TNL) - large vocabulary continuous speech recognition with NLU. TrulySecure (TS) - face and voice biometrics. TrulySecureSpeakerVerification (TSSV) - speaker and sound identification. VoiceHub - Online portal for creating custom wake words and speech recognition models with NLU. Sensory Automotive- Sensory Automotive is a full voice and vision suite of AI technologies that operate efficiently in the car without connecting to a network. The cloud initiative, SensoryCloud.ai, is targeting Speech To Text (STT), Text To Speech (TTS), Wake Word verification, face and voice recognition, and sound identification.
Pixel-art scaling algorithms
Pixel art scaling algorithms are graphical filters that attempt to enhance the appearance of hand-drawn 2D pixel art graphics. These algorithms are a form of automatic image enhancement. Pixel art scaling algorithms employ methods significantly different than the common methods of image rescaling, which have the goal of preserving the appearance of images. As pixel art graphics are commonly used at very low resolutions, they employ careful coloring of individual pixels. This results in graphics that rely on a high amount of stylized visual cues to define complex shapes. Several specialized algorithms have been developed to handle re-scaling of such graphics. These specialized algorithms can improve the appearance of pixel-art graphics, but in doing so they introduce changes. Such changes may be undesirable, especially if the goal is to faithfully reproduce the original appearance. Since a typical application of this technology is improving the appearance of fourth-generation and earlier video games on arcade and console emulators, many pixel art scaling algorithms are designed to run in real-time for sufficiently small input images at 60-frames per second. This places constraints on the type of programming techniques that can be used for this sort of real-time processing. Many work only on specific scale factors. 2× is the most common scale factor, while 3×, 4×, 5×, and 6× exist but are less used. == Algorithms == === SAA5050 'Diagonal Smoothing' === The Mullard SAA5050 Teletext character generator chip (1980) used a primitive pixel scaling algorithm to generate higher-resolution characters on the screen from a lower-resolution representation from its internal ROM. Internally, each character shape was defined on a 5 × 9 pixel grid, which was then interpolated by smoothing diagonals to give a 10 × 18 pixel character, with a characteristically angular shape, surrounded to the top and the left by two pixels of blank space. The algorithm only works on monochrome source data, and assumes the source pixels will be logically true or false depending on whether they are 'on' or 'off'. Pixels 'outside the grid pattern' are assumed to be off. The algorithm works as follows: A B C --\ 1 2 D E F --/ 3 4 1 = B | (A & E & !B & !D) 2 = B | (C & E & !B & !F) 3 = E | (!A & !E & B & D) 4 = E | (!C & !E & B & F) Note that this algorithm, like the Eagle algorithm below, has a flaw: If a pattern of 4 pixels in a hollow diamond shape appears, the hollow will be obliterated by the expansion. The SAA5050's internal character ROM carefully avoids ever using this pattern. The degenerate case: becomes: === EPX/Scale2×/AdvMAME2× === Eric's Pixel Expansion (EPX) is an algorithm developed by Eric Johnston at LucasArts around 1992, when porting the SCUMM engine games from the IBM PC (which ran at 320 × 200 × 256 colors) to the early color Macintosh computers, which ran at more or less double that resolution. The algorithm works as follows, expanding P into 4 new pixels based on P's surroundings: 1=P; 2=P; 3=P; 4=P; IF C==A => 1=A IF A==B => 2=B IF D==C => 3=C IF B==D => 4=D IF of A, B, C, D, three or more are identical: 1=2=3=4=P Later implementations of this same algorithm (as AdvMAME2× and Scale2×, developed around 2001) are slightly more efficient but functionally identical: 1=P; 2=P; 3=P; 4=P; IF C==A AND C!=D AND A!=B => 1=A IF A==B AND A!=C AND B!=D => 2=B IF D==C AND D!=B AND C!=A => 3=C IF B==D AND B!=A AND D!=C => 4=D AdvMAME2× is available in DOSBox via the scaler=advmame2x dosbox.conf option. The AdvMAME4×/Scale4× algorithm is just EPX applied twice to get 4× resolution. ==== Scale3×/AdvMAME3× and ScaleFX ==== The AdvMAME3×/Scale3× algorithm (available in DOSBox via the scaler=advmame3x dosbox.conf option) can be thought of as a generalization of EPX to the 3× case. The corner pixels are calculated identically to EPX. 1=E; 2=E; 3=E; 4=E; 5=E; 6=E; 7=E; 8=E; 9=E; IF D==B AND D!=H AND B!=F => 1=D IF (D==B AND D!=H AND B!=F AND E!=C) OR (B==F AND B!=D AND F!=H AND E!=A) => 2=B IF B==F AND B!=D AND F!=H => 3=F IF (H==D AND H!=F AND D!=B AND E!=A) OR (D==B AND D!=H AND B!=F AND E!=G) => 4=D 5=E IF (B==F AND B!=D AND F!=H AND E!=I) OR (F==H AND F!=B AND H!=D AND E!=C) => 6=F IF H==D AND H!=F AND D!=B => 7=D IF (F==H AND F!=B AND H!=D AND E!=G) OR (H==D AND H!=F AND D!=B AND E!=I) => 8=H IF F==H AND F!=B AND H!=D => 9=F There is also a variant improved over Scale3× called ScaleFX, developed by Sp00kyFox, and a version combined with Reverse-AA called ScaleFX-Hybrid. === Eagle === Eagle works as follows: for every in pixel, we will generate 4 out pixels. First, set all 4 to the color of the pixel we are currently scaling (as nearest-neighbor). Next look at the three pixels above, to the left, and diagonally above left: if all three are the same color as each other, set the top left pixel of our output square to that color in preference to the nearest-neighbor color. Work similarly for all four pixels, and then move to the next one. Assume an input matrix of 3 × 3 pixels where the centermost pixel is the pixel to be scaled, and an output matrix of 2 × 2 pixels (i.e., the scaled pixel) first: |Then . . . --\ CC |S T U --\ 1 2 . C . --/ CC |V C W --/ 3 4 . . . |X Y Z | IF V==S==T => 1=S | IF T==U==W => 2=U | IF V==X==Y => 3=X | IF W==Z==Y => 4=Z Thus if we have a single black pixel on a white background it will vanish. This is a bug in the Eagle algorithm but is solved by other algorithms such as EPX, 2xSaI, and HQ2x. === 2×SaI === 2×SaI, short for 2× Scale and Interpolation engine, was inspired by Eagle. It was designed by Derek Liauw Kie Fa, also known as Kreed, primarily for use in console and computer emulators, and it has remained fairly popular in this niche. Many of the most popular emulators, including ZSNES and VisualBoyAdvance, offer this scaling algorithm as a feature. Several slightly different versions of the scaling algorithm are available, and these are often referred to as Super 2×SaI and Super Eagle. The 2xSaI family works on a 4 × 4 matrix of pixels where the pixel marked A below is scaled: I E F J G A B K --\ W X H C D L --/ Y Z M N O P For 16-bit pixels, they use pixel masks which change based on whether the 16-bit pixel format is 565 or 555. The constants colorMask, lowPixelMask, qColorMask, qLowPixelMask, redBlueMask, and greenMask are 16-bit masks. The lower 8 bits are identical in either pixel format. Two interpolation functions are described: INTERPOLATE(uint32 A, UINT32 B). -- linear midpoint of A and B if (A == B) return A; return ( ((A & colorMask) >> 1) + ((B & colorMask) >> 1) + (A & B & lowPixelMask) ); Q_INTERPOLATE(uint32 A, uint32 B, uint32 C, uint32 D) -- bilinear interpolation; A, B, C, and D's average x = ((A & qColorMask) >> 2) + ((B & qColorMask) >> 2) + ((C & qColorMask) >> 2) + ((D & qColorMask) >> 2); y = (A & qLowPixelMask) + (B & qLowPixelMask) + (C & qLowPixelMask) + (D & qLowPixelMask); y = (y >> 2) & qLowPixelMask; return x + y; The algorithm checks A, B, C, and D for a diagonal match such that A==D and B!=C, or the other way around, or if they are both diagonals or if there is no diagonal match. Within these, it checks for three or four identical pixels. Based on these conditions, the algorithm decides whether to use one of A, B, C, or D, or an interpolation among only these four, for each output pixel. The 2xSaI arbitrary scaler can enlarge any image to any resolution and uses bilinear filtering to interpolate pixels. Since Kreed released the source code under the GNU General Public License, it is freely available to anyone wishing to utilize it in a project released under that license. Developers wishing to use it in a non-GPL project would be required to rewrite the algorithm without using any of Kreed's existing code. It is available in DOSBox via scaler=2xsai option. === hqnx family === Maxim Stepin's hq2x, hq3x, and hq4x are for scale factors of 2:1, 3:1, and 4:1 respectively. Each work by comparing the color value of each pixel to those of its eight immediate neighbors, marking the neighbors as close or distant, and using a pre-generated lookup table to find the proper proportion of input pixels' values for each of the 4, 9 or 16 corresponding output pixels. The hq3x family will perfectly smooth any diagonal line whose slope is ±0.5, ±1, or ±2 and which is not anti-aliased in the input; one with any other slope will alternate between two slopes in the output. It will also smooth very tight curves. Unlike 2xSaI, it anti-aliases the output. hqnx was initially created for the Super NES emulator ZSNES. The author of bsnes has released a space-efficient implementation of hq2x to the public domain. A port to shaders, which has comparable quality to the early versions of xBR, is available. Before the port, a shader called "scalehq" has often been confused for hqx. === xBR family === There are 6 filters in this family: xBR , xBRZ, xBR-Hybrid, Super xBR, xBR+3D and Super xBR+3D. xBR ("scale by rules"), cre
Generatrix
In geometry, a generatrix () or describent is a point, curve or surface that, when moved along a given path, generates a new shape. The path directing the motion of the generatrix motion is called a directrix or dirigent. == Examples == A cone can be generated by moving a line (the generatrix) fixed at the future apex of the cone along a closed curve (the directrix); if that directrix is a circle perpendicular to the line connecting its center to the apex, the motion is rotation around a fixed axis and the resulting shape is a circular cone. The generatrix of a cylinder, a limiting case of a cone, is a line that is kept parallel to some axis.
Bandhan Tod
Bandhan Tod is a mobile app to stop child marriage in India's Bihar state through SOS button in the app. When the SOS on Bandhan Tod is activated, the nearest small NGO will attempt to resolve the issue. If the family resists, then the police gets notified. Till now so many child marriages has been cancelled through Bandhan Tod interventions. Bandhan Tod is an initiative of Gender Alliance managed by Prashanti Tiwari to support the state government's efforts to end child marriage and dowry.