Genotypic and phenotypic repair are optional components of an evolutionary algorithm (EA). An EA reproduces essential elements of biological evolution as a computer algorithm in order to solve demanding optimization or planning tasks, at least approximately. A candidate solution is represented by a - usually linear - data structure that plays the role of an individual's chromosome. New solution candidates are generated by mutation and crossover operators following the example of biology. These offspring may be defective, which is corrected or compensated for by genotypic or phenotypic repair. == Description == Genotypic repair, also known as genetic repair, is the removal or correction of impermissible entries in the chromosome that violate restrictions. In phenotypic repair, the corrections are only made in the genotype-phenotype mapping and the chromosome remains unchanged. Michalewicz wrote about the importance of restrictions in real-world applications: "In general, constraints are an integral part of the formulation of any problem". Restriction violations are application-specific and therefore it depends on the current problem whether and which type of repair is useful. They can usually also be treated by a correspondingly extended evaluation and it depends on the problem which measures are possible and which is the most suitable. If a phenotypic repair is feasible, then it is usually the most efficient compared to the other measures. A survey on repair methods used as constraint handling techniques can be found in. Violations of the range limits of genes should be avoided as far as possible by the formulation of the genome. If this is not possible or if restrictions within the search space defined by the genome are involved, their violations are usually handled by the evaluation. This can be done, for example, by penalty functions that lower the fitness. Repair is often also required for combinatorial tasks. The application of a 1- or n-point crossover operator can, for example, lead to genes being missing in one of the child genomes that are present in duplicate in the other. In this case, a suitable genotypic repair measure is to move the surplus genes to the other genome in a positional manner. The use of the aforementioned operators in combinatorial tasks has also proven to be useful in combination with crossover types specially developed for permutations, at least for certain problems. Particularly in combinatorial problems, it has been observed that genotypic repair can promote premature convergence to a suboptimum, but can also significantly accelerate a successful search. Studies on various tasks have shown that this is application-dependent. An effective measure to avoid premature convergence is generally the use of structured populations instead of the usual panmictic ones. Sequence restrictions play a role in many scheduling tasks, for example when it comes to planning workflows. If, for example, it is specified that step A must be carried out before step B and the gene of step B is located before the gene of A in the chromosome, then there is an impermissible gene sequence. This is because the scheduling operation of step B requires the planned end of step A for correct scheduling, but this is not yet scheduled at the time gene B is processed. The problem can be solved in two ways: The scheduling operation of step B is postponed until the gene from step A has been processed. The genome remains unchanged and the repair only influences the genotype-phenotype mapping. Since only the phenotype is changed, this is referred to as phenotypic repair. If, on the other hand, the gene of step B is moved behind the gene of step A, this is a genotypic repair. The same applies to the alternative shift of gene A in front of gene B. In this case, genotypic repair has the disadvantage that it prevents a meaningful restructuring of the gene sequence in the chromosome if this requires several intermediate steps (mutations) that at least partially violate restrictions.
Ultra Hal
Ultra Hal is a chatbot intended to function as a virtual assistant. It was developed by Zabaware, Inc. Ultra Hal uses a natural language interface with animated characters using speech synthesis. Users can communicate with the chatterbot via typing or via a speech recognition engine. It utilizes the WordNet lexical dictionary. Its name is an allusion to HAL 9000, the artificial intelligence from the movie 2001: A Space Odyssey. Ultra Hal won the 2007 Loebner Prize for "most human" chatterbot.
Utah Social Media Regulation Act
S.B. 152 and H.B. 311, collectively known as the Utah Social Media Regulation Act, were social media regulation bills that were passed by the Utah State Legislature in March 2023. The bills would have collectively imposed restrictions on how social networking services serve minors in the state of Utah, including mandatory age verification and age restrictions, as well as restrictions on data collection and on algorithmic recommendations. The Act was intended to take effect in March 2024. However, following a lawsuit over the Act by NetChoice, a tech industry lobby group, the Utah attorney general stated in January 2024 that its implementation had been delayed to October 2024, but was likely to be repealed and amended. On September 10, 2024 Chief Judge Robert J. Shelby issued a written order granting a request from NetChoice for a preliminary injunction, meaning that Utah will be unable to enforce its social media law as litigation plays out. The law was appealed to the 10th Circuit on October 11, 2024 and is awaiting a decision. == Provisions == The Act comprises two bills, S.B. 152 and H.B. 311, which respectively regulate access to social network accounts registered to minors, and impose obligations on social networking services to follow design practices that protect the privacy of minors. The bills would apply to social networks with more than 5 million active users in the United States. Social networking services would've verified the age of all users in the state of Utah, or else their account must've been deleted. The Act does not specify a specific method of age verification. Users who are under 18 must have consent from a parent or guardian to open an account, and the parent must be able to have access to the account and its data for monitoring. Unless required to comply with state or federal law, social networks were prohibited from collecting data based on the activity of minors, and may've not displayed targeted advertising or algorithmic recommendations of content, users, or groups to minors. A social network must not allow minors to access the service between the hours of 10:30 p.m., and 6:30 a.m. without parental consent. H.B. 311 prohibits social networks from exposing features to minors that cause them to have an "addiction" to the platform; the service must perform quarterly audits, and may be sued by users for harms caused by providing "addictive" features; there is a rebuttable presumption of harm if the plaintiff is 16 or younger. The bills prescribed fines of $2,500 per-violation for violations of the provisions of S.B. 152, and up to $250,000 in liabilities (plus fines of $2,500 per-user) for violations of the addiction rules. == History == The two bills were passed in early-March 2023, and signed by Governor Spencer Cox on March 23, 2023. Cox cited studies linking social media addiction to increases in depression and suicide among youth. They were originally intended to take effect on March 1, 2024. In the wake of a lawsuit in Arkansas by the trade association NetChoice over a similar bill, state senator and bill author Mike McKell stated that he planned to introduce amendments when the legislature resumed in 2024. In December 2023, NetChoice filed a lawsuit in Utah seeking to block the Act, citing that its definition of a social network was too vague, and that it "restricts who can express themselves, what can be said, and when and how speech on covered websites can occur, down to the very hours of the day minors can use covered websites. The First Amendment, reinforced by decades of precedent, allows none of this." In regards to its age verification requirements, NetChoice argued that "it may not be enough to simply verify the age of whatever person may be listed on a form of identification (even if they have such a record) because that record may not accurately reflect who the individual actually is." The office of the attorney general stated that the state was "reviewing the lawsuit but remains intently focused on the goal of this legislation: Protecting young people from negative and harmful effects of social media use." In January 2024, Attorney General Sean Reyes asked the court to delay a hearing over the bill, stating that its effective date had been delayed to October 2024, and that the legislature planned to repeal and replace the bills. On September 10, 2024, Federal Chief Judge Robert Shelby granted a preliminary injunction to stop enforcement of the law as litigation continues. The law was later appealed on October 11, 2024, by the state of Utah and had a court hearing on the appeal on November 20, 2025.
Back-Up Interceptor Control
Backup Interceptor Control (BUIC, ) was the Electronic Systems Division 416M System to backup the SAGE 416L System in the United States and Canada. BUIC deployed Cold War command, control, and coordination systems to SAGE radar stations to create dispersed NORAD Control Centers. == Background == Prior to the SAGE Direction Centers becoming operational, the USAF deployed data link systems at NORAD Control Centers with ground computers for controlling crewed interceptors. After SAGE IBM AN/FSQ-7 Combat Direction Centrals became operational and the Super Combat Centers with improved (digital) computers were cancelled, a backup to SAGE was planned in the event the above-ground SAGE Air Defense Direction Center failed. == General Electric AN/GPA-37 Course Directing Group == BUIC began with deployment of General Electric AN/GPA-37 Course Directing Groups to several Long Range Radar stations. Units designated included the "U.S. Air Force 858th Air Defense Group (BUIC) [which became] a permanent operating facility" at Naval Air Station Fallon in Nevada. == BUIC II == BUIC II was used to command and control sites using the Burroughs AN/GSA-51 Radar Course Directing Group. North Truro AFS became the first ADC installation configured for BUIC II. == BUIC III == The AN/GYK-19 (initially AN/GSA-51A) was an upgraded version of the BUIC II system designated AN/GSA-51A and required a larger building than the AN/GSA-51. The first BUIC III site was Fort Fisher AFS, and Air Defense Command's was first installed at Fort Fisher Air Force Station, North Carolina. Although more advanced systems were contemplated, the final design of the BUIC III system was an upgraded version of the BUIC II with around twice the performance. == Closure and upgrade == In 1972, the USAF decided to shut down most of the BUIC sites; most of the sites mothballed by 1974, except for the BUIC III site at Tyndall Air Force Base. In Canada the BUIC site at Senneterre was shut down, but St Margarets remained open. The remaining sites were closed between 1983-1984 when SAGE was replaced by the Joint Surveillance System. The AN/FYQ-47 Common Digitizer for the Joint Surveillance System, and the Radar Video Data Processor (RVDP) was a combined system for the Air Force and Federal Aviation Administration (FAA), it replaced the SAGE Burroughs AN/FST-2 Coordinate Data Transmitting Sets.
InfiniBand
InfiniBand (IB) is a computer networking standard used in high-performance computing that features very high throughput and very low latency. It is used for data interconnect both among and within computers. InfiniBand is also used as either a direct or switched interconnect between servers and storage systems, as well as an interconnect between storage systems. It is designed to be scalable and uses a switched fabric network topology. Between 2014 and June 2016, it was the most commonly used interconnect in the TOP500 list of supercomputers. Mellanox (acquired by Nvidia) manufactures InfiniBand host bus adapters and network switches, which are used by large computer system and database vendors in their product lines. As a computer cluster interconnect, IB competes with Ethernet, Fibre Channel, and Intel Omni-Path. The technology is promoted by the InfiniBand Trade Association. == History == InfiniBand originated in 1999 from the merger of two competing designs: Future I/O and Next Generation I/O (NGIO). NGIO was led by Intel, with a specification released in 1998, and joined by Sun Microsystems and Dell. Future I/O was backed by Compaq, IBM, and Hewlett-Packard. This led to the formation of the InfiniBand Trade Association (IBTA), which included both sets of hardware vendors as well as software vendors such as Microsoft. At the time it was thought some of the more powerful computers were approaching the interconnect bottleneck of the PCI bus, in spite of upgrades like PCI-X. Version 1.0 of the InfiniBand Architecture Specification was released in 2000. Initially the IBTA vision for IB was simultaneously a replacement for PCI in I/O, Ethernet in the machine room, cluster interconnect and Fibre Channel. IBTA also envisaged decomposing server hardware on an IB fabric. Mellanox had been founded in 1999 to develop NGIO technology, but by 2001 shipped an InfiniBand product line called InfiniBridge at 10 Gbit/second speeds. Following the burst of the dot-com bubble there was hesitation in the industry to invest in such a far-reaching technology jump. By 2002, Intel announced that instead of shipping IB integrated circuits ("chips"), it would focus on developing PCI Express, and Microsoft discontinued IB development in favor of extending Ethernet. Sun Microsystems and Hitachi continued to support IB. In 2003, the System X supercomputer built at Virginia Tech used InfiniBand in what was estimated to be the third largest computer in the world at the time. The OpenIB Alliance (later renamed OpenFabrics Alliance) was founded in 2004 to develop an open set of software for the Linux kernel. By February, 2005, the support was accepted into the 2.6.11 Linux kernel. In November 2005 storage devices finally were released using InfiniBand from vendors such as Engenio. Cisco, desiring to keep technology superior to Ethernet off the market, adopted a "buy to kill" strategy. Cisco successfully killed InfiniBand switching companies such as Topspin via acquisition. Of the top 500 supercomputers in 2009, Gigabit Ethernet was the internal interconnect technology in 259 installations, compared with 181 using InfiniBand. In 2010, market leaders Mellanox and Voltaire merged, leaving just one other IB vendor, QLogic, primarily a Fibre Channel vendor. At the 2011 International Supercomputing Conference, links running at about 56 gigabits per second (known as FDR, see below), were announced and demonstrated by connecting booths in the trade show. In 2012, Intel acquired QLogic's InfiniBand technology, leaving only one independent supplier. By 2014, InfiniBand was the most popular internal connection technology for supercomputers, although within two years, 10 Gigabit Ethernet started displacing it. In 2016, it was reported that Oracle Corporation (an investor in Mellanox) might engineer its own InfiniBand hardware. In 2019 Nvidia acquired Mellanox, the last independent supplier of InfiniBand products. == Specification == Specifications are published by the InfiniBand trade association. === Performance === Original names for speeds were single-data rate (SDR), double-data rate (DDR) and quad-data rate (QDR) as given below. Subsequently, other three-letter initialisms were added for even higher data rates. Notes Each link is duplex. Links can be aggregated: most systems use a 4 link/lane connector (QSFP). HDR often makes use of 2x links (aka HDR100, 100 Gb link using 2 lanes of HDR, while still using a QSFP connector). NDR introduced OSFP connectors which host one or two links at 2x (NDR200) or 4x (NDR400). They are not logically configured as a single 8x link, even when connecting switches together with an OSFP cable. InfiniBand provides remote direct memory access (RDMA) capabilities for low CPU overhead. === Topology === InfiniBand uses a switched fabric topology, as opposed to early shared medium Ethernet. All transmissions begin or end at a channel adapter. Each processor contains a host channel adapter (HCA) and each peripheral has a target channel adapter (TCA). These adapters can also exchange information for security or quality of service (QoS). === Messages === InfiniBand transmits data in packets of up to 4 KB that are taken together to form a message. A message can be: a remote direct memory access read or write a channel send or receive a transaction-based operation (that can be reversed) a multicast transmission an atomic operation === Physical interconnection === In addition to a board form factor connection, it can use both active and passive copper (up to 10 meters) and optical fiber cable (up to 10 km). QSFP connectors are used. The InfiniBand Association also specified the CXP connector system for speeds up to 120 Gbit/s over copper, active optical cables, and optical transceivers using parallel multi-mode fiber cables with 24-fiber MPO connectors. === Software interfaces === Mellanox operating system support is available for Solaris, FreeBSD, Red Hat Enterprise Linux, SUSE Linux Enterprise Server (SLES), Windows, HP-UX, VMware ESX, and AIX. InfiniBand has no specific standard application programming interface (API). The standard only lists a set of verbs such as ibv_open_device or ibv_post_send, which are abstract representations of functions or methods that must exist. The syntax of these functions is left to the vendors. Sometimes for reference this is called the verbs API. The de facto standard software is developed by OpenFabrics Alliance and called the Open Fabrics Enterprise Distribution (OFED). It is released under two licenses GPL2 or BSD license for Linux and FreeBSD, and as Mellanox OFED for Windows (product names: WinOF / WinOF-2; attributed as host controller driver for matching specific ConnectX 3 to 5 devices) under a choice of BSD license for Windows. It has been adopted by most of the InfiniBand vendors, for Linux, FreeBSD, and Microsoft Windows. IBM refers to a software library called libibverbs, for its AIX operating system, as well as "AIX InfiniBand verbs". The Linux kernel support was integrated in 2005 into the kernel version 2.6.11. === Ethernet over InfiniBand === Ethernet over InfiniBand, abbreviated to EoIB, is an Ethernet implementation over the InfiniBand protocol and connector technology. EoIB enables multiple Ethernet bandwidths varying on the InfiniBand (IB) version. Ethernet's implementation of the Internet Protocol Suite, usually referred to as TCP/IP, is different in some details compared to the direct InfiniBand protocol in IP over IB (IPoIB).
Google Messages
Google Messages (formerly known as Messenger, Android Messages, and Messages by Google) is a text messaging software application developed by Google for its Android and Wear OS mobile operating systems. It is also available as a web app. Google's official universal messaging platform for the Android ecosystem, Messages employs SMS, MMS, and Rich Communication Services (RCS). Starting in 2023, Google has RCS activated by default on participating Android devices, similar to the implementation of iMessage on Apple devices. Samsung Messages will be discontinued on July 6th 2026, with Samsung transitioning users to Google Messages as the default messaging application. == History == The original code for Android SMS messaging was released in 2009 integrated into the operating system. It was released as a standalone application independent of Android with the release of Android 5.0 Lollipop in 2014, replacing Google Hangouts as the default SMS app on Google's Nexus line of phones. In 2018, Messages adopted RCS messages and evolved to send larger data files, sync with other apps, and even create mass messages. This was in preparation for when Google launched Messages for web. In December 2019, Google began to introduce support for Rich Communication Services (RCS) messaging via an RCS service hosted by Google, referred to in the user interface as "chat features". This was followed by a wider global rollout throughout 2020. The app surpassed 1 billion installs in April 2020, doubling its number of installs in less than a year. Initially, RCS did not support end-to-end encryption. In June 2021, Google introduced end-to-end encryption in Messages by default using the Signal Protocol, for all one-to-one RCS-based conversations, for all RCS group chats in December 2022 for beta users, and for all RCS users by August 2023, as well as enabling RCS for all users by default to encourage encryption. In July 2023, Google announced it would build the Message Layer Security (MLS) end-to-end encryption protocol into Google Messages. Beginning with the Samsung Galaxy S21, Messages replaces Samsung's in-house Messages app as the default text messaging app for One UI for some regions and carriers. In April 2021, the app began to receive UI modifications on Samsung devices to follow aspects of One UI, including pushing the top of the message list towards the middle of the screen to improve ergonomics. In February 2023, Google began to replace references to "chat features" in the Messages user interface with "RCS". In August 2023, Google announced that Messages will use RCS by default for all users unless they opt out, to allow them to benefit from secure messaging. In December 2023, with the arrival of several new features, the app was renamed "Google Messages". In July 2024, Samsung announced it would no longer pre-install Samsung Messages on its Galaxy devices in some regions, starting with the Galaxy Z Fold 6 and Flip, favoring Google Messages instead. In April 2026, Samsung announced that Samsung Messages would be discontinued in July 2026. It encouraged users to switch to Google Messages. == Features == Some of the most important features in Google Messages are: Send instant text and voice messages in 1:1 or group chat conversations over mobile data and Wi-Fi, via Android, Wear OS or the web. End-to-end encryption for RCS chats. Typing, sent, delivered and read status Reply and react to specific messages Share files and high-resolution photos Voice message transcriptions Schedule messages In-app reminders for birthdays and messages you didn't respond to after some time with Nudges Tight integration with the Google ecosystem, e.g. Google Calendar, Meet, Maps, YouTube, Photos, Contacts, Assistant, Search, Safe Browsing etc. Web interface: Users can visit https://messages.google.com/web and either sign in with their Google account or scan the QR code that is shown with their smartphone to access a limited web version of the app that allows them to send and receive messages, provided the smartphone remains connected. Phone number recognition: The app shows the country and province of the caller. Additionally, it can show the company's name or a warning for spam calls if the number is registered in a data base. Access to the Gemini chatbot on select Pixel, Galaxy and Android devices.
ACTS Gigabit Satellite Network
The ACTS Gigabit Satellite Network was a pioneering, high-speed communications satellite network in the years 1993-2004, created as a prototype system to explore high-speed networking of digital endpoints. The system was jointly sponsored by NASA and ARPA, implemented by BBN Technologies and Motorola, and was inducted into the Space Technology Hall of Fame in April 1997. The Advanced Communications Technology Satellite (ACTS) network was designed to provide fiber-compatible SONET service to remote nodes and networks through a wideband satellite system, and provided long-haul, point-to-point and point-to-multipoint full-duplex SONET services, at rates up to 622 Mbit/s, over NASA's Advanced Communication Technology Satellite (ACTS). The Advanced Communications Technology Satellite itself, built and operated by Lockheed Martin, was launched on STS-51 on September 12, 1993, by the Space Shuttle Discovery, and occupied a geostationary orbit at 100° west longitude. It was the first communication satellite to operate in the 20–30 GHz frequency band (Ka band), with 30 GHz uplink and 20 GHz downlink signals. The satellite incorporated advanced on-board switching and multiple dynamically-hopping spot-beam antennas for selected areas of the United States including Hawaii. Up to 3 uplink and 3 downlink antenna beams could be active simultaneously. The ACTS network ground terminals were transportable Gigabit Earth Stations (GES) with fiber-optic SONET interfaces (OC-3 and OC-12), which also supported the Asynchronous Transfer Mode (ATM) protocol suite. The network control and management functions are distributed in the various Gigabit Earth Stations, with the operator's interface being centralized in a Network Management Terminal (NMT), which could be collocated at a GES, or anywhere in the Internet. The system was operational and used for experiments for 127 months, instead of the originally planned 24–48 months. In all, 53 terminals were built and used by more than 100 experimenters to test ACTS abilities. In Nov. 1997 a record data rate of 520 Mbit/s TCP/IP throughput was achieved using ATM between several ground stations via ACTS. On May 31, 2000 the ACTS experiments program officially came to a close, but the system continued to support experiments until it was deactivated on April 28, 2004.