Netsukuku is an experimental peer-to-peer routing system, developed by the FreakNet MediaLab in 2005, created to build up a distributed network, anonymous and censorship-free, fully independent but not necessarily separated from the Internet, without the support of any server, Internet service provider and no central authority. Netsukuku is designed to handle up to 2128 nodes without any servers or central systems, with minimal CPU and memory resources. This mesh network can be built using existing network infrastructure components such as Wi-Fi. The project has been in slow development since 2005, never abandoning a beta state. It has also never been tested on large scale. == Operation == As of December 2011, the latest theoretical work on Netsukuku could be found in the author's master thesis Scalable Mesh Networks and the Address Space Balancing problem. The following description takes into account only the basic concepts of the theory. Netsukuku uses a custom routing protocol called QSPN (Quantum Shortest Path Netsukuku) that strives to be efficient and not taxing on the computational capabilities of each node. The current version of the protocol is QSPNv2. It adopts a hierarchical structure. 256 nodes are grouped inside a gnode (group node), 256 gnodes are grouped in a single ggnode (group of group nodes), 256 ggnodes are grouped in a single gggnode, and so on. This offers a set of advantages main documentation. The protocol relies on the fact that the nodes are not mobile and that the network structure does not change quickly, as several minutes may be required before a change in the network is propagated. However, a node that joins the network is immediately able to communicate using the routes of its neighbors. When a node joins the mesh network, Netsukuku automatically adapts and all other nodes come to know the fastest and most efficient routes to communicate with the newcomer. Each node has no more privileges or restrictions than the other nodes. The domain name system (DNS) is replaced by a decentralised and distributed system called ANDNA (Abnormal Netsukuku Domain Name Anarchy). The ANDNA database is included in the Netsukuku system, so each node includes such database that occupies at most 355 kilobytes of memory. Simplifying, ANDNA works as follows: to resolve a symbolic name the host applies a function Hash on its behalf. The Hash function returns an address that the host contacts asking for the resolution generated by the hash. The contacted node receives a request, searches in its ANDNA database for the address associated with the name and returns it to the applicant host. Recording works in a similar way: for example, let's suppose that the node X wants to register the address FreakNet.andna; X calculates the hash name and obtains the address 11.22.33.44 associated with node Y. The node X contacts Y asking to register 11.22.33.44 as its own. Y stores the request in its database and any request for resolution of 11.22.33.44 hash, will answer with the X's address. The protocol is a little more complex than this, as the system provides a public/private key to authenticate the hosts and prevent unauthorized changes to the ANDNA database. Furthermore, the protocol provides redundancy in the database to make the protocol resistant to failure and also provides for the migration of the database if the network topology changes. The protocol does not provide for the possibility of revoking a symbolic name; after a certain period of inactivity (currently 3 days) it is simply deleted from the database. The protocol also prevents a single host from recording an excessive number of symbolic names (at present 256 names) in order to prevent spammers from storing a high number of terms to perform cybersquatting.
Robotic process automation
Robotic process automation (RPA) is a form of business process automation that is based on software robots (bots) or artificial intelligence (AI) agents. RPA should not be confused with artificial intelligence as it is based on automation technology following a predefined workflow. It is sometimes referred to as software robotics (not to be confused with robot software). In traditional workflow automation tools, a software developer produces a list of actions to automate a task and interface to the back end system using internal application programming interfaces (APIs) or dedicated scripting language. In contrast, RPA systems develop the action list by watching the user perform that task in the application's graphical user interface (GUI) and then perform the automation by repeating those tasks directly in the GUI. This can lower the barrier to the use of automation in products that might not otherwise feature APIs for this purpose. RPA tools have strong technical similarities to graphical user interface testing tools. These tools also automate interactions with the GUI, and often do so by repeating a set of demonstration actions performed by a user. RPA tools differ from such systems in that they allow data to be handled in and between multiple applications, for instance, receiving email containing an invoice, extracting the data, and then typing that into a bookkeeping system. == Historic evolution == As a form of automation, the concept has been around for a long time in the form of screen scraping, so long that to early PC users the reminder of it often blurs with the idea of malware infection. Yet compared to screen scraping, RPA is much more extensible, consisting of API integration into other enterprise applications, connectors into ITSM systems, terminal services and even some types of AI (e.g. machine learning) services such as image recognition. It is considered to be a significant technological evolution in the sense that new software platforms are emerging which are sufficiently mature, resilient, scalable and reliable to make this approach viable for use in large enterprises (who would otherwise be reluctant due to perceived risks to quality and reputation). == Use == The hosting of RPA services also aligns with the metaphor of a software robot, with each robotic instance having its own virtual workstation, much like a human worker. The robot uses keyboard and mouse controls to take actions and execute automations. Normally, all of these actions take place in a virtual environment and not on screen; the robot does not need a physical screen to operate, rather it interprets the screen display electronically. The scalability of modern solutions based on architectures such as these owes much to the advent of virtualization technology, without which the scalability of large deployments would be limited by the available capacity to manage physical hardware and by the associated costs. The implementation of RPA in business enterprises has shown dramatic cost savings when compared to traditional non-RPA solutions. === RPA actual use === Banking and finance process automation Mortgage and lending processes Customer care automation eCommerce merchandising operations Social media marketing Optical character recognition applications Data extraction process Fixed automation process Manual and repetitive tasks automation Voice recognition and digital dictation software linked to join up business processes for straight through processing without manual intervention Specialised remote infrastructure management software featuring automated investigation and resolution of problems, using robots for the first line IT support Chatbots used by internet retailers and service providers to service customer requests for information. Also used by companies to service employee requests for information from internal databases Presentation layer automation software, increasingly used by business process outsourcers to displace human labour Interactive voice response (IVR) systems incorporating intelligent interaction with callers == Impact on employment == According to Harvard Business Review, most operations groups adopting RPA have promised their employees that automation would not result in layoffs. Instead, workers have been redeployed to do more interesting work. One academic study highlighted that knowledge workers did not feel threatened by automation: they embraced it and viewed the robots as team-mates. The same study highlighted that, rather than resulting in a lower "headcount", the technology was deployed in such a way as to achieve more work and greater productivity with the same number of people. Conversely, however, some analysts proffer that RPA represents a threat to the business process outsourcing (BPO) industry. The thesis behind this notion is that RPA will enable enterprises to "repatriate" processes from offshore locations into local data centers, with the benefit of this new technology. The effect, if true, will be to create high-value jobs for skilled process designers in onshore locations (and within the associated supply chain of IT hardware, data center management, etc.) but to decrease the available opportunity to low-skilled workers offshore. On the other hand, this discussion appears to be healthy ground for debate as another academic study was at pains to counter the so-called "myth" that RPA will bring back many jobs from offshore. === Impact on society === Academic studies project that RPA, among other technological trends, is expected to drive a new wave of productivity and efficiency gains in the global labour market. Although not directly attributable to RPA alone, Oxford University conjectures that up to 35% of all jobs might be automated by 2035. There are geographic implications to the trend in robotic automation. In the example above where an offshored process is "repatriated" under the control of the client organization (or even displaced by a business process outsourcer) from an offshore location to a data centre, the impact will be a deficit in economic activity to the offshore location and an economic benefit to the originating economy. On this basis, developed economies – with skills and technological infrastructure to develop and support a robotic automation capability – can be expected to achieve a net benefit from the trend. In a TEDx talk hosted by University College London (UCL), entrepreneur David Moss explains that digital labour in the form of RPA is likely to revolutionize the cost model of the services industry by driving the price of products and services down, while simultaneously improving the quality of outcomes and creating increased opportunity for the personalization of services. In a separate TEDx in 2019 talk, Japanese business executive, and former CIO of Barclays bank, Koichi Hasegawa noted that digital robots can be a positive effect on society if we start using a robot with empathy to help every person. He provides a case study of the Japanese insurance companies – Sompo Japan and Aioi – both of whom introduced bots to speed up the process of insurance pay-outs in past massive disaster incidents. Meanwhile, Professor Willcocks, author of the LSE paper cited above, speaks of increased job satisfaction and intellectual stimulation, characterising the technology as having the ability to "take the robot out of the human", a reference to the notion that robots will take over the mundane and repetitive portions of people's daily workload, leaving them to be used in more interpersonal roles or to concentrate on the remaining, more meaningful, portions of their day. It was also found in a 2021 study observing the effects of robotization in Europe that, the gender pay gap increased at a rate of .18% for every 1% increase in robotization of a given industry. == Unassisted RPA == Unassisted RPA, or RPAAI, is the next generation of RPA related technologies. Technological advancements around artificial intelligence allow a process to be run on a computer without needing input from a user. == Hyperautomation == Hyperautomation is the application of advanced technologies like RPA, artificial intelligence, machine learning (ML) and process mining to augment workers and automate processes in ways that are significantly more impactful than traditional automation capabilities. Hyperautomation is the combination of technologies that allow faster application authorship (like low-code and no-code) with automation technologies that coordinate different worker types (i.e. human and artificial) for intelligent and strategic workflow optimization. Gartner's report notes that this trend was kicked off with robotic process automation (RPA). The report notes that, "RPA alone is not hyperautomation. Hyperautomation requires a combination of tools to help support replicating pieces of where the human is involved in a task." == Outsourcing == Back office clerical processes outsourced by large organisations
Backdoor (computing)
A backdoor is a typically covert method of bypassing normal authentication or encryption in a computer, product, embedded device (e.g. a home router), or its embodiment (e.g. part of a cryptosystem, algorithm, chipset, or even a "homunculus computer"—a tiny computer-within-a-computer such as that found in Intel's AMT technology). Backdoors are most often used for securing remote access to a computer, or obtaining access to plaintext in cryptosystems. From there it may be used to gain access to privileged information like passwords, corrupt or delete data on hard drives, or transfer information within compromised networks. In the United States, the 1994 Communications Assistance for Law Enforcement Act forces internet providers to provide backdoors for government authorities. In 2024, the U.S. government realized that China had been tapping communications in the U.S. using that infrastructure for months, or perhaps longer; China recorded presidential candidate campaign office phone calls—including employees of the then-vice president of the nation, and of the candidates themselves. A backdoor may take the form of a hidden part of a program, a separate program (e.g. Back Orifice may subvert the system through a rootkit), code in the firmware of the hardware, or parts of an operating system such as Windows, for example, device drivers. Trojan horses can be used to create vulnerabilities in a device. A Trojan horse may appear to be an entirely legitimate program, but when executed, it triggers an activity that may install a backdoor. Although some are secretly installed, other backdoors are deliberate and widely known. These kinds of backdoors have "legitimate" uses such as providing the manufacturer with a way to restore user passwords. Many systems that store information within the cloud fail to create accurate security measures. If many systems are connected within the cloud, hackers can gain access to all other platforms through the most vulnerable system. Default passwords (or other default credentials) can function as backdoors if they are not changed by the user. Some debugging features can also act as backdoors if they are not removed in the release version. In 1993, the United States government attempted to deploy an encryption system, the Clipper chip, with an explicit backdoor for law enforcement and national security access. The chip was unsuccessful. Recent proposals to counter backdoors include creating a database of backdoors' triggers and then using neural networks to detect them. == Overview == The threat of backdoors surfaced when multiuser and networked operating systems became widely adopted. Petersen and Turn discussed computer subversion in a paper published in the proceedings of the 1967 AFIPS Conference. They noted a class of active infiltration attacks that use "trapdoor" entry points into the system to bypass security facilities and permit direct access to data. The use of the word trapdoor here clearly coincides with more recent definitions of a backdoor. However, since the advent of public key cryptography the term trapdoor has acquired a different meaning (see: Trapdoor function), and thus the term "backdoor" is now preferred, only after the term trapdoor went out of use. More generally, such security breaches were discussed at length in a RAND Corporation task force report published under DARPA sponsorship by J.P. Anderson and D.J. Edwards in 1970. While initially targeting the computer vision domain, backdoor attacks have expanded to encompass various other domains, including text, audio, ML-based computer-aided design, and ML-based wireless signal classification. Additionally, vulnerabilities in backdoors have been demonstrated in deep generative models, reinforcement learning (e.g., AI GO), and deep graph models. These broad-ranging potential risks have prompted concerns from national security agencies regarding their potentially disastrous consequences. A backdoor in a login system might take the form of a hard coded user and password combination which gives access to the system. An example of this sort of backdoor was used as a plot device in the 1983 film WarGames, in which the architect of the "WOPR" computer system had inserted a hardcoded password-less account which gave the user access to the system, and to undocumented parts of the system (in particular, a video game-like simulation mode and direct interaction with the artificial intelligence). Although the number of backdoors in systems using proprietary software (software whose source code is not publicly available) is not widely credited, they are nevertheless frequently exposed. Programmers have even succeeded in secretly installing large amounts of benign code as Easter eggs in programs, although such cases may involve official forbearance, if not actual permission. == Examples == === Worms === Many computer worms, such as Sobig and Mydoom, install a backdoor on the affected computer (generally a PC on broadband running Microsoft Windows and Microsoft Outlook). Such backdoors appear to be installed so that spammers can send junk e-mail from the infected machines. Others, such as the Sony/BMG rootkit, placed secretly on millions of music CDs through late 2005, are intended as DRM measures—and, in that case, as data-gathering agents, since both surreptitious programs they installed routinely contacted central servers. A sophisticated attempt to plant a backdoor in the Linux kernel, exposed in November 2003, added a small and subtle code change by subverting the revision control system. In this case, a two-line change appeared to check root access permissions of a caller to the sys_wait4 function, but because it used assignment = instead of equality checking ==, it actually granted permissions to the system. This difference is easily overlooked, and could even be interpreted as an accidental typographical error, rather than an intentional attack. In January 2014, a backdoor was discovered in certain Samsung Android products, like the Galaxy devices. The Samsung proprietary Android versions are fitted with a backdoor that provides remote access to the data stored on the device. In particular, the Samsung Android software that is in charge of handling the communications with the modem, using the Samsung IPC protocol, implements a class of requests known as remote file server (RFS) commands, that allows the backdoor operator to perform via modem remote I/O operations on the device hard disk or other storage. As the modem is running Samsung proprietary Android software, it is likely that it offers over-the-air remote control that could then be used to issue the RFS commands and thus to access the file system on the device. === Object code backdoors === Harder to detect backdoors involve modifying object code, rather than source code—object code is much harder to inspect, as it is designed to be machine-readable, not human-readable. These backdoors can be inserted either directly in the on-disk object code, or inserted at some point during compilation, assembly linking, or loading—in the latter case the backdoor never appears on disk, only in memory. Object code backdoors are difficult to detect by inspection of the object code, but are easily detected by simply checking for changes (differences), notably in length or in checksum, and in some cases can be detected or analyzed by disassembling the object code. Further, object code backdoors can be removed (assuming source code is available) by simply recompiling from source on a trusted system. Thus for such backdoors to avoid detection, all extant copies of a binary must be subverted, and any validation checksums must also be compromised, and source must be unavailable, to prevent recompilation. Alternatively, these other tools (length checks, diff, checksumming, disassemblers) can themselves be compromised to conceal the backdoor, for example detecting that the subverted binary is being checksummed and returning the expected value, not the actual value. To conceal these further subversions, the tools must also conceal the changes in themselves—for example, a subverted checksummer must also detect if it is checksumming itself (or other subverted tools) and return false values. This leads to extensive changes in the system and tools being needed to conceal a single change. As object code can be regenerated by recompiling (reassembling, relinking) the original source code, making a persistent object code backdoor (without modifying source code) requires subverting the compiler itself—so that when it detects that it is compiling the program under attack it inserts the backdoor—or alternatively the assembler, linker, or loader. As this requires subverting the compiler, this in turn can be fixed by recompiling the compiler, removing the backdoor insertion code. This defense can in turn be subverted by putting a source meta-backdoor in the compiler, so that when it detects that it is compiling itself
Data validation and reconciliation
Industrial process data validation and reconciliation, or more briefly, process data reconciliation (PDR), is a technology that uses process information and mathematical methods in order to automatically ensure data validation and reconciliation by correcting measurements in industrial processes. The use of PDR allows for extracting accurate and reliable information about the state of industry processes from raw measurement data and produces a single consistent set of data representing the most likely process operation. == Models, data and measurement errors == Industrial processes, for example chemical or thermodynamic processes in chemical plants, refineries, oil or gas production sites, or power plants, are often represented by two fundamental means: Models that express the general structure of the processes, Data that reflects the state of the processes at a given point in time. Models can have different levels of detail, for example one can incorporate simple mass or compound conservation balances, or more advanced thermodynamic models including energy conservation laws. Mathematically the model can be expressed by a nonlinear system of equations F ( y ) = 0 {\displaystyle F(y)=0\,} in the variables y = ( y 1 , … , y n ) {\displaystyle y=(y_{1},\ldots ,y_{n})} , which incorporates all the above-mentioned system constraints (for example the mass or heat balances around a unit). A variable could be the temperature or the pressure at a certain place in the plant. === Error types === Data originates typically from measurements taken at different places throughout the industrial site, for example temperature, pressure, volumetric flow rate measurements etc. To understand the basic principles of PDR, it is important to first recognize that plant measurements are never 100% correct, i.e. raw measurement y {\displaystyle y\,} is not a solution of the nonlinear system F ( y ) = 0 {\displaystyle F(y)=0\,\!} . When using measurements without correction to generate plant balances, it is common to have incoherencies. Measurement errors can be categorized into two basic types: random errors due to intrinsic sensor accuracy and systematic errors (or gross errors) due to sensor calibration or faulty data transmission. Random errors means that the measurement y {\displaystyle y\,\!} is a random variable with mean y ∗ {\displaystyle y^{}\,\!} , where y ∗ {\displaystyle y^{}\,\!} is the true value that is typically not known. A systematic error on the other hand is characterized by a measurement y {\displaystyle y\,\!} which is a random variable with mean y ¯ {\displaystyle {\bar {y}}\,\!} , which is not equal to the true value y ∗ {\displaystyle y^{}\,} . For ease in deriving and implementing an optimal estimation solution, and based on arguments that errors are the sum of many factors (so that the Central limit theorem has some effect), data reconciliation assumes these errors are normally distributed. Other sources of errors when calculating plant balances include process faults such as leaks, unmodeled heat losses, incorrect physical properties or other physical parameters used in equations, and incorrect structure such as unmodeled bypass lines. Other errors include unmodeled plant dynamics such as holdup changes, and other instabilities in plant operations that violate steady state (algebraic) models. Additional dynamic errors arise when measurements and samples are not taken at the same time, especially lab analyses. The normal practice of using time averages for the data input partly reduces the dynamic problems. However, that does not completely resolve timing inconsistencies for infrequently-sampled data like lab analyses. This use of average values, like a moving average, acts as a low-pass filter, so high frequency noise is mostly eliminated. The result is that, in practice, data reconciliation is mainly making adjustments to correct systematic errors like biases. === Necessity of removing measurement errors === ISA-95 is the international standard for the integration of enterprise and control systems It asserts that: Data reconciliation is a serious issue for enterprise-control integration. The data have to be valid to be useful for the enterprise system. The data must often be determined from physical measurements that have associated error factors. This must usually be converted into exact values for the enterprise system. This conversion may require manual, or intelligent reconciliation of the converted values [...]. Systems must be set up to ensure that accurate data are sent to production and from production. Inadvertent operator or clerical errors may result in too much production, too little production, the wrong production, incorrect inventory, or missing inventory. == History == PDR has become more and more important due to industrial processes that are becoming more and more complex. PDR started in the early 1960s with applications aiming at closing material balances in production processes where raw measurements were available for all variables. At the same time the problem of gross error identification and elimination has been presented. In the late 1960s and 1970s unmeasured variables were taken into account in the data reconciliation process., PDR also became more mature by considering general nonlinear equation systems coming from thermodynamic models., , Quasi steady state dynamics for filtering and simultaneous parameter estimation over time were introduced in 1977 by Stanley and Mah. Dynamic PDR was formulated as a nonlinear optimization problem by Liebman et al. in 1992. == Data reconciliation == Data reconciliation is a technique that targets at correcting measurement errors that are due to measurement noise, i.e. random errors. From a statistical point of view the main assumption is that no systematic errors exist in the set of measurements, since they may bias the reconciliation results and reduce the robustness of the reconciliation. Given n {\displaystyle n} measurements y i {\displaystyle y_{i}} , data reconciliation can mathematically be expressed as an optimization problem of the following form: min x , y ∗ ∑ i = 1 n ( y i ∗ − y i σ i ) 2 subject to F ( x , y ∗ ) = 0 y min ≤ y ∗ ≤ y max x min ≤ x ≤ x max , {\displaystyle {\begin{aligned}\min _{x,y^{}}&\sum _{i=1}^{n}\left({\frac {y_{i}^{}-y_{i}}{\sigma _{i}}}\right)^{2}\\{\text{subject to }}&F(x,y^{})=0\\&y_{\min }\leq y^{}\leq y_{\max }\\&x_{\min }\leq x\leq x_{\max },\end{aligned}}\,\!} where y i ∗ {\displaystyle y_{i}^{}\,\!} is the reconciled value of the i {\displaystyle i} -th measurement ( i = 1 , … , n {\displaystyle i=1,\ldots ,n\,\!} ), y i {\displaystyle y_{i}\,\!} is the measured value of the i {\displaystyle i} -th measurement ( i = 1 , … , n {\displaystyle i=1,\ldots ,n\,\!} ), x j {\displaystyle x_{j}\,\!} is the j {\displaystyle j} -th unmeasured variable ( j = 1 , … , m {\displaystyle j=1,\ldots ,m\,\!} ), and σ i {\displaystyle \sigma _{i}\,\!} is the standard deviation of the i {\displaystyle i} -th measurement ( i = 1 , … , n {\displaystyle i=1,\ldots ,n\,\!} ), F ( x , y ∗ ) = 0 {\displaystyle F(x,y^{})=0\,\!} are the p {\displaystyle p\,\!} process equality constraints and x min , x max , y min , y max {\displaystyle x_{\min },x_{\max },y_{\min },y_{\max }\,\!} are the bounds on the measured and unmeasured variables. The term ( y i ∗ − y i σ i ) 2 {\displaystyle \left({\frac {y_{i}^{}-y_{i}}{\sigma _{i}}}\right)^{2}\,\!} is called the penalty of measurement i. The objective function is the sum of the penalties, which will be denoted in the following by f ( y ∗ ) = ∑ i = 1 n ( y i ∗ − y i σ i ) 2 {\displaystyle f(y^{})=\sum _{i=1}^{n}\left({\frac {y_{i}^{}-y_{i}}{\sigma _{i}}}\right)^{2}} . In other words, one wants to minimize the overall correction (measured in the least squares term) that is needed in order to satisfy the system constraints. Additionally, each least squares term is weighted by the standard deviation of the corresponding measurement. The standard deviation is related to the accuracy of the measurement. For example, at a 95% confidence level, the standard deviation is about half the accuracy. === Redundancy === Data reconciliation relies strongly on the concept of redundancy to correct the measurements as little as possible in order to satisfy the process constraints. Here, redundancy is defined differently from redundancy in information theory. Instead, redundancy arises from combining sensor data with the model (algebraic constraints), sometimes more specifically called "spatial redundancy", "analytical redundancy", or "topological redundancy". Redundancy can be due to sensor redundancy, where sensors are duplicated in order to have more than one measurement of the same quantity. Redundancy also arises when a single variable can be estimated in several independent ways from separate sets of measurements at a given time or time averaging period, using the algebraic constraints. Redundancy is linked to the concept
Social media surgery
A social media surgery is a gathering at which volunteer "surgeons" with expertise in using web tools, chiefly social media, offer free advice in using such tools, to representatives ("patients") of non-profit organisations, charities, community groups and activists, with "no boring speeches or jargon". The idea was conceived by Pete Ashton, with Nick Booth of Podnosh Ltd, who ran the first such surgery in Birmingham, England, on 15 October 2008. In July 2009, a spin-off surgery (dubbed the "Social media mob") started in Mosman, Australia, and in January 2010, the first spin-off surgery in Africa was held. On 16 February 2012, it was announced that the Social Media Surgery movement had won "the Prime Minister’s Big Society Award". Prime Minister David Cameron said: This is an excellent initiative - such a simple idea and yet so effective. The popularity of these surgeries and the fact that they have inspired so many others across the country to follow in their footsteps, is testament to its brilliance. Congratulations to Nick and all the volunteers who have shared their time and expertise to help so many local groups make the most of the internet to support their community. A great example of the Big Society in action. The scheme also won the 2013 Adult Learners' Week "BBC Learning Through Technology Award".
ClearForest
ClearForest was an Israeli software company that developed and marketed text analytics and text mining solutions. == History == Founded in 1998, ClearForest had its headquarters just outside Boston and a development center in Or Yehuda. The company was acquired by Reuters in April, 2007. It now markets its services under the names Calais, OpenCalais, and OneCalais. ClearForest was previously venture-backed; its last funding round was led by Greylock Ventures and closed in 2005. Other investors included DB Capital Partners, Pitango, Walden Israel, Booz Allen, JP Morgan Partners and HarbourVest Partners. On February 7, 2008 Reuters announced the launch of Open Calais, a named-entity recognition and semantic analysis service that uses ClearForest technology. On April 30, 2007, Reuters announced that it would acquire ClearForest. Sources estimate the acquisition to be for $25 Million. == Solutions and products == ClearForest offers several hosted solutions, including: OpenCalais, a free web service and open API (for commercial and non-commercial use) that performs named-entity recognition and enables automatic metadata generation using the ClearForest financial module. Semantic Web Services (SWS), an on-demand service that makes ClearForest's natural language processing tools available as a standard web service. A subset of ClearForest's capabilities is available via SWS at no cost. Gnosis, a free Firefox extension that uses SWS to analyze the content of a web page. Gnosis identifies named entities such as people, companies, organizations, geographies and products on the page being viewed. Gnosis also automatically processes pages from Wikipedia, providing additional links for people, geographies and other entities which were not explicitly linked within the subject article. Harvest, a real-time machine-readable news service that uses SWS to process a company's news and document feeds and return machine-readable information about people, companies, locations and over 200 other entities facts and events. ClearForest also offers Text Analytics solutions targeted at specific business problems, including: Equity valuation for hedge funds and alternative investments firms Metadata & database creation for publishers and information providers/services Tapping "voice of customer" for market and survey research firms Quality Early Warning for vehicle, capital equipment & durable goods manufacturers
Blacker (security)
Blacker (styled BLACKER) is a U.S. Department of Defense computer network security project designed to achieve A1 class ratings (very high assurance) of the Trusted Computer System Evaluation Criteria (TCSEC). The first Blacker program began in the late 1970s, with a follow-on eventually producing fielded devices in the late 1980s. It was the first secure system with trusted end-to-end encryption on the United States' Defense Data Network. The project was implemented by SDC (software), and Burroughs (hardware), and after their merger, by the resultant company Unisys.