Pattern theory, formulated by Ulf Grenander, is a mathematical formalism to describe knowledge of the world as patterns. It differs from other approaches to artificial intelligence in that it does not begin by prescribing algorithms and machinery to recognize and classify patterns; rather, it prescribes a vocabulary to articulate and recast the pattern concepts in precise language. Broad in its mathematical coverage, Pattern Theory spans algebra and statistics, as well as local topological and global entropic properties. In addition to the new algebraic vocabulary, its statistical approach is novel in its aim to: Identify the hidden variables of a data set using real world data rather than artificial stimuli, which was previously commonplace. Formulate prior distributions for hidden variables and models for the observed variables that form the vertices of a Gibbs-like graph. Study the randomness and variability of these graphs. Create the basic classes of stochastic models applied by listing the deformations of the patterns. Synthesize (sample) from the models, not just analyze signals with them. The Brown University Pattern Theory Group was formed in 1972 by Ulf Grenander. Many mathematicians are currently working in this group, noteworthy among them being the Fields Medalist David Mumford. Mumford regards Grenander as his "guru" in Pattern Theory.
NAPLPS
NAPLPS (North American Presentation Layer Protocol Syntax) is a graphics language for use originally with videotex and teletext services. NAPLPS was developed from the Telidon system developed in Canada, with a small number of additions from AT&T Corporation. The basics of NAPLPS were later used as the basis for several other microcomputer-based graphics systems. == History == The Canadian Communications Research Centre (CRC), based in Ottawa, had been working on various graphics systems since the late 1960s, much of it led by Herb Bown. Through the 1970s they turned their attention to building out a system of "picture description instructions", which encoded graphics commands as a text stream. Graphics were encoded as a series of instructions (graphics primitives) each represented by a single ASCII character. Graphic coordinates were encoded in multiple 6-bit strings of XY coordinate data, flagged to place them in the printable ASCII range so that they could be transmitted with conventional text transmission techniques. ASCII SI/SO characters were used to differentiate the text from graphic portions of a transmitted "page". These instructions were decoded by separate programs to produce graphics output, on a plotter for instance. Other work produced a fully interactive version. In 1975, the CRC gave a contract to Norpak to develop an interactive graphics terminal that could decode the instructions and display them on a color display. During this period, a number of companies were developing the first teletext systems, notably the BBC's Ceefax system. Ceefax encoded character data into the lines in the vertical blanking interval of normal television signals where they could not be seen on-screen, and then used a buffer and decoder in the user's television to convert these into "pages" of text on the display. The Independent Broadcasting Authority quickly introduced their own ORACLE system, and the two organizations subsequently agreed to use a single standard, the "Broadcast Teletext Specification". This later became World System Teletext. At about the same time, other organizations were developing videotex systems, similar to teletext except they used modems to transmit their data instead of television signals. This was potentially slower and used up a telephone line, but had the major advantage of allowing the user to transmit data back to the sender. The UK's General Post Office developed a system using the Ceefax/ORACLE standard, launching it as Prestel, while France prepared the first steps for its ultimately very successful Minitel system, using a rival display standard called Antiope. By 1977, the Norpak system was running, and from this work the CRC decided to create their own teletext/videotext system. Unlike the systems being rolled out in Europe, the CRC decided from the start that the system should be able to run on any combination of communications links. For instance, it could use the vertical blanking interval to send data to the user, and a modem to return selections to the servers. It could be used in a one-way or two-way system. In teletext mode, character codes were sent to users' televisions by encoding them as dot patterns in the vertical blanking interval of the video signal. Various technical "tweaks" and details of the NTSC signals used by North American televisions allowed the downstream videotex channel to increase to 600 bit/s, about twice that used in the European systems. In videotext mode, Bell 202 modems were typical, offering a 1,200 bit/s download rate. A set top box attached to the TV decoded these signals back into text and graphics pages, which the user could select among. The system was publicly launched as Telidon on August 15, 1978. Compared to the European standards, the CRC system was faster, bi-directional, and offered real graphics as opposed to simple character graphics. The downside of the system was that it required much more advanced decoders, typically featuring Zilog Z80 or Motorola 6809 processors with RGB and/or RF output. The Innovation, Science and Economic Development Canada (then Department of Communications) launched a four-year plan to fund public roll-outs of the technology in an effort to spur the development of a commercial Telidon system. AT&T Corporation was so impressed by Telidon that they decided to join the project. They added a number of useful extensions, notably the ability to define original graphics commands (macro) and character sets (DRCS). They also tabled algorithms for proportionally spaced text, which greatly improved the quality of the displayed pages. A joint CSA/ANSI working group (X3L2.1) revised the specifications, which were submitted for standardization. In 1983, they became CSA T500 and ANSI X3.110, or NAPLPS. The data encoding system was also standardized as the NABTS (North American Broadcast Teletext Specification) protocol. Business models for Telidon services were poorly developed. Unlike the UK, where teletext was supported by one of only two large companies whose whole revenue model was based on a read-only medium (television), in North America Telidon was being offered by companies who worked on a subscriber basis. == One-way systems == Telidon-based teletext was tested in a few North American trials in the early 1980s — CBC IRIS, TVOntario, MTS-sponsored Project IDA, to name a few. NAPLPS was also part of the NABTS teletext standard, for the encoding and display of teletext pages. In the late 1980s and early 1990s, affiliates of the regional sports network group SportsChannel ran a service called Sports Plus Network, which ran sports news and scores while SportsChannel was not otherwise on the air. The screens, which frequently featured team logos or likenesses of players in addition to text, were drawn entirely with NAPLPS graphics and resembled the loading of Prodigy pages over a modem, though slightly faster. == Two-way systems == Various two-way systems using NAPLPS appeared in North America in the early 1980s. The biggest North American examples were Knight Ridder's Viewtron (based in Miami) and the Los Angeles Times' Gateway service (based in Orange County). Both used the Sceptre NAPLPS terminal from AT&T. The Sceptre contained a slow modem that connected over the consumer's telephone line to host computers. The Sceptre was expensive whether purchased or rented. Despite huge investments by their parent companies, neither Viewtron nor Gateway lasted into the second half of the decade. Another system, Keyfax, was developed by Keycom Electronic Publishing, a joint venture of Honeywell, Centel (since acquired by Sprint) and Field Enterprises, then-owner of the Chicago Sun-Times newspaper. Keyfax had originally been a WST teletext service, broadcast overnights on Field's Chicago television station WFLD-32 and through the VBI of both WFLD and national superstation WTBS; the decision was made to convert Keyfax into a subscription service, using a proprietary NAPLPS terminal device in a last-ditch effort to save the service. It did not work and Keyfax had ceased operations by the end of 1986. Other early-1980s NAPLPS technology was deployed in Canada, both as a way for rural Canadians to get news and weather information and as the platform for touchscreen information kiosks. In Vancouver these were featured at Expo 86. The kiosks became ubiquitous in Toronto under the name Teleguide, and were deployed in many shopping centres and at major tourist attractions. The latter city was the North American nexus of NAPLPS and the home of Norpak, the most successful of NAPLPS-oriented developers. Norpak created and sold hardware and software for NAPLPS development and display. TVOntario also developed NAPLPS content creation software. London, Ontario - based Cableshare used NAPLPS as the basis of touch-screen information kiosks for shopping malls, the flagship of which was deployed at Toronto's Eaton Centre. The system relied on an 8085-based microcomputer which drove several NAPLPS terminals fitted with touch screens, all communicating via Datapac to a back end database. The system offered news, weather and sports information along with shopping mall guides and coupons. Cableshare also developed and sold a leading NAPLPS page creation utility called the "Picture Painter." In the late 1980s, Tribune Media Services (TMS) and the Associated Press operated a cable television channel called AP News Plus that provided NAPLPS-based news screens to cable television subscribers in many U.S. cities. The news pages were created and edited by TMS staffers working on an Atex editing system in Orlando, Florida, and sent by satellite to NAPLPS decoder devices located at the local cable television companies. Among the firms providing technology to TMS and the Associated Press for the AP News Plus channel was Minneapolis-based Electronic Publishers Inc. (1985–1988). In 1981, two amateur radio operators (VE3FTT and VE3GQW) received special permission from the Canad
Normalization (image processing)
In image processing, normalization is a process that changes the range of pixel intensity values, a kind of intensity mapping. Applications include photographs with poor contrast due to glare, for example. A typical case is contrast stretching. In more general fields of data processing, such as digital signal processing, it is referred to as dynamic range expansion. The purpose of dynamic range expansion in the various applications is usually to bring the image, or other type of signal, into a range that is more familiar or normal to the senses, hence the term normalization. Often, the motivation is to achieve consistency in dynamic range for a set of data, signals, or images to avoid mental distraction or fatigue. For example, a newspaper will strive to make all of the images in an issue share a similar range of grayscale. Auto-normalization in image processing software typically normalizes to the full dynamic range of the number system specified in the image file format. == Definition == Normalization transforms an n-dimensional grayscale image I : { X ⊆ R n } → { Min , . . , Max } {\displaystyle I:\{\mathbb {X} \subseteq \mathbb {R} ^{n}\}\rightarrow \{{\text{Min}},..,{\text{Max}}\}} with intensity values in the range ( Min , Max ) {\displaystyle ({\text{Min}},{\text{Max}})} , into a new image I N : { X ⊆ R n } → { newMin , . . , newMax } {\displaystyle I_{N}:\{\mathbb {X} \subseteq \mathbb {R} ^{n}\}\rightarrow \{{\text{newMin}},..,{\text{newMax}}\}} with intensity values in the range ( newMin , newMax ) {\displaystyle ({\text{newMin}},{\text{newMax}})} . The linear normalization of a grayscale digital image is performed according to the formula I N = ( I − Min ) newMax − newMin Max − Min + newMin {\displaystyle I_{N}=(I-{\text{Min}}){\frac {{\text{newMax}}-{\text{newMin}}}{{\text{Max}}-{\text{Min}}}}+{\text{newMin}}} For example, if the intensity range of the image is 50 to 180 and the desired range is 0 to 255 the process entails subtracting 50 from each of pixel intensity, making the range 0 to 130. Then each pixel intensity is multiplied by 255/130, making the range 0 to 255. Normalization might also be non-linear, as the relationship between I {\displaystyle I} and I N {\displaystyle I_{N}} may not be linear. An example of non-linear normalization is when the normalization follows a sigmoid function, in which case the normalized image is computed according to the formula I N = ( newMax − newMin ) 1 1 + e − I − β α + newMin {\displaystyle I_{N}=({\text{newMax}}-{\text{newMin}}){\frac {1}{1+e^{-{\frac {I-\beta }{\alpha }}}}}+{\text{newMin}}} Where α {\displaystyle \alpha } defines the width of the input intensity range, and β {\displaystyle \beta } defines the intensity around which the range is centered. Gamma correction (log/inverse log) is also a common transformation function. === Colorspace === Intensity operations generally operate on a colorspace that maps to the human perception of lightness without intentionally changing the other properties. This can be done, for example, by operating on the L component of the CIELAB color space, or approximately by operating on the Y component of YCbCr. It is also possible to operate on each of the RGB color channels, though the result will not always make sense. == Contrast stretching == This is the most significant and essential technique of spatial-based image enhancement. The basic intent of this contrast enhancement technique is to adjust the local contrast in the image so as to bring out the clear regions or objects in the image. Low-contrast images often result from poor or non-uniform lighting conditions, a limited dynamic range of the imaging sensor, or improper settings of the lens aperture. This operation tries to change the intensity of the pixel in the image, particularly in the input image, to obtain an enhanced image. It is based on the number of techniques, namely local, global, dark and bright levels of contrast. The contrast enhancement is considered as the amount of color or gray differentiation that lies among the different features in an image. The contrast enhancement improves the quality of image by increasing the luminance difference between the foreground and background. A contrast stretching transformation can be achieved by: Stretching the dark range of input values into a wider range of output values: This involves increasing the brightness of the darker areas in the image to enhance details and improve visibility. Shifting the mid-range of input values: This involves adjusting the brightness levels of the mid-tones in the image to improve overall contrast and clarity. Compressing the bright range of input values: This process involves reducing the brightness of the brighter areas in the image to prevent overexposure resulting in a more balanced and visually appealing image. It can be described as the following piecewise funciton: I N = { s 1 r 1 I if I < r 1 s 2 − s 1 r 1 − r 2 ( I − r 1 ) if r 1 ≤ I ≤ r 2 1 − s 2 1 − r 2 ( I − r 2 ) if I > r 2 {\displaystyle I_{N}={\begin{cases}{\frac {s_{1}}{r_{1}}}I&{\text{if }}I
Customer support
Customer support is a range of services to assist customers in making cost effective and correct use of a product. It includes assistance in planning, installation, training, troubleshooting, maintenance, upgrading, and disposal of a product. Regarding technology products such as mobile phones, televisions, computers, software products or other electronic or mechanical goods, it is termed technical support. It aims to ensure users can effectively operate the product and resolve any issues that may arise throughout its lifecycle. Support is delivered through various channels, including telephone, email, live chat, self-service knowledge bases, and social media. Research indicates that most customers attempt to resolve issues through self-service before contacting a representative. For products sold across multiple regions, support may be provided in several languages, as consumers tend to prefer assistance in their native language. Requirements for customer contact centres are defined in international standards such as ISO 18295.
Plotting algorithms for the Mandelbrot set
There are many programs and algorithms used to plot the Mandelbrot set and other fractals, some of which are described in fractal-generating software. These programs use a variety of algorithms to determine the color of individual pixels efficiently. == Escape time algorithm == The simplest algorithm for generating a representation of the Mandelbrot set is known as the "escape time" algorithm. A repeating calculation is performed for each x, y point in the plot area and based on the behavior of that calculation, a color is chosen for that pixel. === Unoptimized naïve escape time algorithm === In both the unoptimized and optimized escape time algorithms, the x and y locations of each point are used as starting values in a repeating, or iterating calculation (described in detail below). The result of each iteration is used as the starting values for the next. The values are checked during each iteration to see whether they have reached a critical "escape" condition, or "bailout". If that condition is reached, the calculation is stopped, the pixel is drawn, and the next x, y point is examined. For some starting values, escape occurs quickly, after only a small number of iterations. For starting values very close to but not in the set, it may take hundreds or thousands of iterations to escape. For values within the Mandelbrot set, escape will never occur. The programmer or user must choose how many iterations–or how much "depth"–they wish to examine. The higher the maximal number of iterations, the more detail and subtlety emerge in the final image, but the longer time it will take to calculate the fractal image. Escape conditions can be simple or complex. Because no complex number with a real or imaginary part greater than 2 can be part of the set, a common bailout is to escape when either coefficient exceeds 2. A more computationally complex method that detects escapes sooner, is to compute distance from the origin using the Pythagorean theorem, i.e., to determine the absolute value, or modulus, of the complex number. If this value exceeds 2, or equivalently, when the sum of the squares of the real and imaginary parts exceed 4, the point has reached escape. More computationally intensive rendering variations include the Buddhabrot method, which finds escaping points and plots their iterated coordinates. The color of each point represents how quickly the values reached the escape point. Often black is used to show values that fail to escape before the iteration limit, and gradually brighter colors are used for points that escape. This gives a visual representation of how many cycles were required before reaching the escape condition. To render such an image, the region of the complex plane we are considering is subdivided into a certain number of pixels. To color any such pixel, let c {\displaystyle c} be the midpoint of that pixel. We now iterate the critical point 0 under P c {\displaystyle P_{c}} , checking at each step whether the orbit point has modulus larger than 2. When this is the case, we know that c {\displaystyle c} does not belong to the Mandelbrot set, and we color our pixel according to the number of iterations used to find out. Otherwise, we keep iterating up to a fixed number of steps, after which we decide that our parameter is "probably" in the Mandelbrot set, or at least very close to it, and color the pixel black. In pseudocode, this algorithm would look as follows. The algorithm does not use complex numbers and manually simulates complex-number operations using two real numbers, for those who do not have a complex data type. The program may be simplified if the programming language includes complex-data-type operations. for each pixel (Px, Py) on the screen do x0 := scaled x coordinate of pixel (scaled to lie in the Mandelbrot X scale (-2.00, 0.47)) y0 := scaled y coordinate of pixel (scaled to lie in the Mandelbrot Y scale (-1.12, 1.12)) x := 0.0 y := 0.0 iteration := 0 max_iteration := 1000 while (xx + yy ≤ 22 AND iteration < max_iteration) do xtemp := xx - yy + x0 y := 2xy + y0 x := xtemp iteration := iteration + 1 color := palette[iteration] plot(Px, Py, color) Here, relating the pseudocode to c {\displaystyle c} , z {\displaystyle z} and P c {\displaystyle P_{c}} : z = x + i y {\displaystyle z=x+iy\ } z 2 = x 2 + 2 i x y {\displaystyle z^{2}=x^{2}+2ixy} - y 2 {\displaystyle y^{2}\ } c = x 0 + i y 0 {\displaystyle c=x_{0}+iy_{0}\ } and so, as can be seen in the pseudocode in the computation of x and y: x = R e ( z 2 + c ) = x 2 − y 2 + x 0 {\displaystyle x=\mathop {\mathrm {Re} } (z^{2}+c)=x^{2}-y^{2}+x_{0}} and y = I m ( z 2 + c ) = 2 x y + y 0 . {\displaystyle y=\mathop {\mathrm {Im} } (z^{2}+c)=2xy+y_{0}.\ } To get colorful images of the set, the assignment of a color to each value of the number of executed iterations can be made using one of a variety of functions (linear, exponential, etc.). One practical way, without slowing down calculations, is to use the number of executed iterations as an entry to a palette initialized at startup. If the color table has, for instance, 500 entries, then the color selection is n mod 500, where n is the number of iterations. === Optimized escape time algorithms === The code in the previous section uses an unoptimized inner while loop for clarity. In the unoptimized version, one must perform five multiplications per iteration. To reduce the number of multiplications the following code for the inner while loop may be used instead: x2:= 0 y2:= 0 w:= 0 while (x2 + y2 ≤ 4 and iteration < max_iteration) do x:= x2 - y2 + x0 y:= w - x2 - y2 + y0 x2:= x x y2:= y y w:= (x + y) (x + y) iteration:= iteration + 1 The above code works via some algebraic simplification of the complex multiplication: ( i y + x ) 2 = − y 2 + 2 i y x + x 2 = x 2 − y 2 + 2 i y x {\displaystyle {\begin{aligned}(iy+x)^{2}&=-y^{2}+2iyx+x^{2}\\&=x^{2}-y^{2}+2iyx\end{aligned}}} Using the above identity, the number of multiplications can be reduced to three instead of five. The above inner while loop can be further optimized by expanding w to w = x 2 + 2 x y + y 2 {\displaystyle w=x^{2}+2xy+y^{2}} Substituting w into y = w − x 2 − y 2 + y 0 {\displaystyle y=w-x^{2}-y^{2}+y_{0}} yields y = 2 x y + y 0 {\displaystyle y=2xy+y_{0}} and hence calculating w is no longer needed. The further optimized pseudocode for the above is: x:= 0 y:= 0 x2:= 0 y2:= 0 while (x2 + y2 ≤ 4 and iteration < max_iteration) do x2:= x x y2:= y y y:= 2 x y + y0 x:= x2 - y2 + x0 iteration:= iteration + 1 Note that in the above pseudocode, 2 x y {\displaystyle 2xy} seems to increase the number of multiplications by 1, but since 2 is the multiplier the code can be optimized via ( x + x ) y {\displaystyle (x+x)y} . == Coloring algorithms == In addition to plotting the set, a variety of algorithms have been developed to efficiently color the set in an aesthetically pleasing way show structures of the data (scientific visualisation) === Histogram coloring === A more complex coloring method involves using a histogram which pairs each pixel with said pixel's maximum iteration count before escape/bailout. This method will equally distribute colors to the same overall area, and, importantly, is independent of the maximum number of iterations chosen. This algorithm has four passes. The first pass involves calculating the iteration counts associated with each pixel (but without any pixels being plotted). These are stored in an array IterationCounts[x][y], where x and y are the x and y coordinates of said pixel on the screen respectively. The first step of the second pass is to create an array NumIterationsPerPixel[n], where the array size n is the maximum iteration count. Next, one must iterate over the array of pixel-iteration count pairs IterationCounts[x][y], and retrieve each pixel's saved iteration count, i, via e.g. i = IterationCounts[x][y]. After each pixel's iteration count i is retrieved, it is necessary to index the NumIterationsPerPixel array at i and increment the indexed value (which is initially zero) -- e.g. NumIterationsPerPixel[i] = NumIterationsPerPixel[i] + 1. for (x = 0; x < width; x++) do for (y = 0; y < height; y++) do i:= IterationCounts[x][y] NumIterationsPerPixel[i]++ The third pass iterates through the NumIterationsPerPixel array and adds up all the stored values, saving them in total. The array index represents the number of pixels that reached that iteration count before bailout. total: = 0 for (i = 0; i < max_iterations; i++) do total += NumIterationsPerPixel[i] After this, the fourth pass begins and all the values in the IterationCounts array are indexed, and, for each iteration count i, associated with each pixel, the count is added to a global sum of all the iteration counts from 1 to i in the NumIterationsPerPixel array . This value is then normalized by dividing the sum by the total value computed earlier. hue[][]:= 0.0 for (x = 0; x < width; x++) do for (y = 0; y < height; y++) do iteration:= Iteration
DigitaltMuseum
DigitaltMuseum (lit. 'The Digital Museum') is a website database in Norwegian and Swedish for art, images and cultural history museums. The service was established in 2009 after a trial period. The database is developed and operated by KulturIT. KulturIT ANS was established by the Norwegian Museum of Cultural History and Maihaugen in consultation with the Norwegian Archive, Library and Museum Authority (ABM) in 2007. In 2015, the company underwent a corporate transformation and KulturIT AS was established on 12 February. The website has per 2025 around 2,548,022 images. Many of the images are in the public domain or under Creative Commons licenses and are being imported into Wikimedia Commons. The website's API was developed in 2012. == Institutions == As of 2025, there are 223 collaborating museums. == Mission == DigitaltMuseum aims to make the museums' collections accessible to all interested parties, regardless of time and place. The website aims to facilitate easy use of the collections through various methods including image searches, research, teaching and joint knowledge development. DigitaltMuseum contains collections from several hundred Norwegian and Swedish museums, totalling around five million objects. The website contains both historical images from the areas and themes covered by the museums, as well as images of artefacts from the collections. Parts of the collection have previously only been shown in the museums' exhibitions and books and have therefore rarely or never been shown to the public.
Audio-visual speech recognition
Audio visual speech recognition (AVSR) is a technique that uses image processing capabilities in lip reading to aid speech recognition systems in recognizing indeterministic phones or giving preponderance among near probability decisions. Each system of lip reading and speech recognition works separately, then their results are mixed at the stage of feature fusion. As the name suggests, it has two parts. First one is the audio part and second one is the visual part. In audio part we use features like log mel spectrogram, mfcc etc. from the raw audio samples and we build a model to get feature vector out of it . For visual part generally we use some variant of convolutional neural network to compress the image to a feature vector after that we concatenate these two vectors (audio and visual ) and try to predict the target object.