Machine vision is the technology and methods used to provide imaging-based automatic inspection and analysis for such applications as automatic inspection, process control, and robot guidance, usually in industry. Machine vision refers to many technologies, software and hardware products, integrated systems, actions, methods and expertise. Machine vision as a systems engineering discipline can be considered distinct from computer vision, a form of computer science. It attempts to integrate existing technologies in new ways and apply them to solve real world problems. The term is the prevalent one for these functions in industrial automation environments but is also used for these functions in other environment vehicle guidance. The overall machine vision process includes planning the details of the requirements and project, and then creating a solution. During run-time, the process starts with imaging, followed by automated analysis of the image and extraction of the required information. == Definition == Definitions of the term "Machine vision" vary, but all include the technology and methods used to extract information from an image on an automated basis, as opposed to image processing, where the output is another image. The information extracted can be a simple good-part/bad-part signal, or more a complex set of data such as the identity, position and orientation of each object in an image. The information can be used for such applications as automatic inspection and robot and process guidance in industry, for security monitoring and vehicle guidance. This field encompasses a large number of technologies, software and hardware products, integrated systems, actions, methods and expertise. Machine vision is practically the only term used for these functions in industrial automation applications; the term is less universal for these functions in other environments such as security and vehicle guidance. Machine vision as a systems engineering discipline can be considered distinct from computer vision, a form of basic computer science; machine vision attempts to integrate existing technologies in new ways and apply them to solve real world problems in a way that meets the requirements of industrial automation and similar application areas. The term is also used in a broader sense by trade shows and trade groups such as the Automated Imaging Association and the European Machine Vision Association. This broader definition also encompasses products and applications most often associated with image processing. The primary uses for machine vision are automatic inspection and industrial robot/process guidance. In more recent times the terms computer vision and machine vision have converged to a greater degree. See glossary of machine vision. == Imaging based automatic inspection and sorting == The primary uses for machine vision are imaging-based automatic inspection and sorting and robot guidance.; in this section the former is abbreviated as "automatic inspection". The overall process includes planning the details of the requirements and project, and then creating a solution. This section describes the technical process that occurs during the operation of the solution. === Methods and sequence of operation === The first step in the automatic inspection sequence of operation is acquisition of an image, typically using cameras, lenses, and lighting that has been designed to provide the differentiation required by subsequent processing. MV software packages and programs developed in them then employ various digital image processing techniques to extract the required information, and often make decisions (such as pass/fail) based on the extracted information. === Equipment === The components of an automatic inspection system usually include lighting, a camera or other imager, a processor, software, and output devices. === Imaging === The imaging device (e.g. camera) can either be separate from the main image processing unit or combined with it in which case the combination is generally called a smart camera or smart sensor. Inclusion of the full processing function into the same enclosure as the camera is often referred to as embedded processing. When separated, the connection may be made to specialized intermediate hardware, a custom processing appliance, or a frame grabber within a computer using either an analog or standardized digital interface (Camera Link, CoaXPress). MV implementations also use digital cameras capable of direct connections (without a framegrabber) to a computer via FireWire, USB or Gigabit Ethernet interfaces. While conventional (2D visible light) imaging is most commonly used in MV, alternatives include multispectral imaging, hyperspectral imaging, imaging various infrared bands, line scan imaging, 3D imaging of surfaces and X-ray imaging. Key differentiations within MV 2D visible light imaging are monochromatic vs. color, frame rate, resolution, and whether or not the imaging process is simultaneous over the entire image, making it suitable for moving processes. Though the vast majority of machine vision applications are solved using two-dimensional imaging, machine vision applications utilizing 3D imaging are a growing niche within the industry. The most commonly used method for 3D imaging is scanning based triangulation which utilizes motion of the product or image during the imaging process. A laser is projected onto the surfaces of an object. In machine vision this is accomplished with a scanning motion, either by moving the workpiece, or by moving the camera & laser imaging system. The line is viewed by a camera from a different angle; the deviation of the line represents shape variations. Lines from multiple scans are assembled into a depth map or point cloud. Stereoscopic vision is used in special cases involving unique features present in both views of a pair of cameras. Other 3D methods used for machine vision are time of flight and grid based. One method is grid array based systems using pseudorandom structured light system as employed by the Microsoft Kinect system circa 2012. === Image processing === After an image is acquired, it is processed. Central processing functions are generally done by a CPU, a GPU, a FPGA or a combination of these. Deep learning training and inference impose higher processing performance requirements. Multiple stages of processing are generally used in a sequence that ends up as a desired result. A typical sequence might start with tools such as filters which modify the image, followed by extraction of objects, then extraction (e.g. measurements, reading of codes) of data from those objects, followed by communicating that data, or comparing it against target values to create and communicate "pass/fail" results. Machine vision image processing methods include; Stitching/Registration: Combining of adjacent 2D or 3D images. Filtering (e.g. morphological filtering) Thresholding: Thresholding starts with setting or determining a gray value that will be useful for the following steps. The value is then used to separate portions of the image, and sometimes to transform each portion of the image to simply black and white based on whether it is below or above that grayscale value. Pixel counting: counts the number of light or dark pixels Segmentation: Partitioning a digital image into multiple segments to simplify and/or change the representation of an image into something that is more meaningful and easier to analyze. Edge detection: finding object edges Color Analysis: Identify parts, products and items using color, assess quality from color, and isolate features using color. Blob detection and extraction: inspecting an image for discrete blobs of connected pixels (e.g. a black hole in a grey object) as image landmarks. Neural network / deep learning / machine learning processing: weighted and self-training multi-variable decision making Circa 2019 there is a large expansion of this, using deep learning and machine learning to significantly expand machine vision capabilities. The most common result of such processing is classification. Examples of classification are object identification,"pass fail" classification of identified objects and OCR. Pattern recognition including template matching. Finding, matching, and/or counting specific patterns. This may include location of an object that may be rotated, partially hidden by another object, or varying in size. Barcode, Data Matrix and "2D barcode" reading Optical character recognition: automated reading of text such as serial numbers Gauging/Metrology: measurement of object dimensions (e.g. in pixels, inches or millimeters) Comparison against target values to determine a "pass or fail" or "go/no go" result. For example, with code or bar code verification, the read value is compared to the stored target value. For gauging, a measurement is compared against the proper value and tolerances. For verification of alpha-numberic codes, the
Ghana Post GPS
GhanaPostGPS is a web and smartphone application, sponsored by the government of Ghana and developed by Vokacom, to provide a digital addresses and postal codes for every 5 squared meter location in Ghana. The digital address is a composite of the postcode (region, district & area code) plus a unique address. GhanaPostGPS is the first digital addressing system created by the government of Ghana. GhanaPost GPS is a mandatory requirement for obtaining the National Identification Card and other services.
Realization (linguistics)
In linguistics, realization is the process by which some kind of surface representation is derived from its underlying representation; that is, the way in which some abstract object of linguistic analysis comes to be produced in actual language. Phonemes are often said to be realized by speech sounds. The different sounds that can realize a particular phoneme are called its allophones. Realization is also a subtask of natural language generation, which involves creating an actual text in a human language (English, French, etc.) from a syntactic representation. There are a number of software packages available for realization, most of which have been developed by academic research groups in NLG. The remainder of this article concerns realization of this kind. == Example == For example, the following Java code causes the simplenlg system [2] to print out the text The women do not smoke.: In this example, the computer program has specified the linguistic constituents of the sentence (verb, subject), and also linguistic features (plural subject, negated), and from this information the realiser has constructed the actual sentence. == Processing == Realisation involves three kinds of processing: Syntactic realisation: Using grammatical knowledge to choose inflections, add function words and also to decide the order of components. For example, in English the subject usually precedes the verb, and the negated form of smoke is do not smoke. Morphological realisation: Computing inflected forms, for example the plural form of woman is women (not womans). Orthographic realisation: Dealing with casing, punctuation, and formatting. For example, capitalising The because it is the first word of the sentence. The above examples are very basic, most realisers are capable of considerably more complex processing. == Systems == A number of realisers have been developed over the past 20 years. These systems differ in terms of complexity and sophistication of their processing, robustness in dealing with unusual cases, and whether they are accessed programmatically via an API or whether they take a textual representation of a syntactic structure as their input. There are also major differences in pragmatic factors such as documentation, support, licensing terms, speed and memory usage, etc. It is not possible to describe all realisers here, but a few of the emerging areas are: Simplenlg [3]: a document realizing engine with an api which intended to be simple to learn and use, focused on limiting scope to only finding the surface area of a document. KPML [4]: this is the oldest realiser, which has been under development under different guises since the 1980s. It comes with grammars for ten different languages. FUF/SURGE [5]: a realiser which was widely used in the 1990s, and is still used in some projects today OpenCCG [6]: an open-source realiser which has a number of nice features, such as the ability to use statistical language models to make realisation decisions.
Meesho
Meesho Limited (short for Meri shop, transl. My shop) is an Indian e-commerce company, headquartered in Bengaluru. Founded by Vidit Aatrey and Sanjeev Barnwal in December 2015, Meesho is an online marketplace in categories such as fashion, home and kitchen, beauty and personal care, electronics accessories, and daily use products. == History == Meesho Private Limited, formerly Fashnear Technologies Private Limited, was established by IIT Delhi graduates Vidit Aatrey and Sanjeev Barnwal in December, 2015 In 2016, the founders came up with the idea of re-establishing the platform as Meesho, one that would enable country-wide shipping for resellers with the use of social media sites as tools for marketing. In February 2019, the platform reported having around 209,000 users and about 1.2 million monthly orders, and in March 2020, it reported approximately 563,000 users and 3.1 million monthly orders. In 2021, the Meesho mobile application was ranked among the most downloaded shopping apps globally. In 2022, Meesho had about 120 million monthly users and about 910 million orders were made through the platform, with a gross merchandise value (GMV) of about $5 billion. According to report as of August 2023 Meesho delisted 42 lakh counterfeit listings and 10 lakh restricted products under its initiative Project Suraksha. During the same period, the platform blocked access for over 12,000 user accounts flagged for policy violations. The Court granted injunctive relief by directing domain registrars to suspend the infringing websites. Additionally, the Court ordered law enforcement authorities to initiate criminal investigations, freeze associated financial accounts against the identified offenders. In 2023, Meesho became the fastest shopping app to cross over 500 million downloads. In 2024, Meesho introduced Valmo, a logistics marketplace, to provide shipment services to sellers by aggregating multiple logistics providers. Meesho employs over 3,000 small businesses and 10-12 large firms for warehousing and sorting operations within its logistics framework. According to media reports, Valmo operating in approximately 15,000 pincodes in India with around 6,000 partners. It is reported to handle over 50% of Meesho's daily orders. In November 2024, Meesho introduced a generative AI-powered voice bot for customer support, managing approximately 60,000 calls daily in English and Hindi. According to media reports, the system resolves the majority of queries without human assistance, with only a small fraction of calls requiring manual intervention. According to media reports, in 2024, Meesho prevented over 22 million suspicious or potentially fraudulent transactions on its platform. The company initiated legal proceedings, resulting in the filing of twelve cases, including nine specifically targeting over forty individuals in the cities of Kolkata and Ranchi. The company filed a suit in the Delhi High Court for a permanent injunction against parties operating deceptive websites misappropriating its brand identity. Meesha went public through an initial public offering in December 2025, raising $603 million. It is listed on both the BSE and NSE. == Recognition == In 2023, Meesho was named one of the most influential companies of the year by Time (magazine).
Computational photography
Computational photography refers to digital image capture and processing techniques that use digital computation instead of optical processes. Computational photography can improve the capabilities of a camera, or introduce features that were not possible at all with film-based photography, or reduce the cost or size of camera elements. Examples of computational photography include in-camera computation of digital panoramas, high-dynamic-range images, and light field cameras. Light field cameras use novel optical elements to capture three-dimensional scene information, which can then be used to produce 3D images, enhanced depth-of-field, and selective de-focusing (or "post focus"). Enhanced depth-of-field reduces the need for mechanical focusing systems. All of these features use computational imaging techniques. The definition of computational photography has evolved to cover a number of subject areas in computer graphics, computer vision, and applied optics. These areas are given below, organized according to a taxonomy proposed by Shree K. Nayar. Within each area is a list of techniques, and for each technique, one or two representative papers or books are cited. Deliberately omitted from the taxonomy are image processing (see also digital image processing) techniques applied to traditionally captured images to produce better images. Examples of such techniques are image scaling, dynamic range compression (i.e. tone mapping), color management, image completion (a.k.a. inpainting or hole filling), image compression, digital watermarking, and artistic image effects. Also omitted are techniques that produce range data, volume data, 3D models, 4D light fields, 4D, 6D, or 8D BRDFs, or other high-dimensional image-based representations. Epsilon photography is a sub-field of computational photography. == Effect on photography == Photos taken using computational photography can allow amateurs to produce photographs rivalling the quality of professional photographers, but as of 2019 do not outperform the use of professional-level equipment. == Computational illumination == This is controlling photographic illumination in a structured fashion, then processing the captured images, to create new images. The applications include image-based relighting, image enhancement, image deblurring, geometry/material recovery and so forth. High-dynamic-range imaging uses differently exposed pictures of the same scene to extend dynamic range. Other examples include processing and merging differently illuminated images of the same subject matter ("lightspace"). == Computational optics == This is a capture of optically coded images, followed by computational decoding to produce new images. Coded aperture imaging was mainly applied in astronomy and X-ray imaging to boost the image quality. Instead of a single pin-hole, a pinhole pattern is applied in imaging, and deconvolution is performed to recover the image. In coded exposure imaging, the on/off state of the shutter is coded to modify the kernel of motion blur. In this way, motion deblurring becomes a well-conditioned problem. Similarly, in a lens based coded aperture, the aperture can be modified by inserting a broadband mask. Thus, out of focus deblurring becomes a well-conditioned problem. The coded aperture can also improve the quality in light field acquisition using Hadamard transform optics. Coded aperture patterns can also be designed using color filters, in order to apply different codes at different wavelengths. This allows for increase the amount of light that reaches the camera sensor, compared to binary masks. == Computational imaging == Computational imaging is a set of imaging techniques that combine data acquisition and data processing to create the image of an object through indirect means to yield enhanced resolution, additional information such as optical phase or 3D reconstruction. The information is often recorded without using a conventional optical microscope configuration or with limited datasets. Computational imaging allows going beyond physical limitations of optical systems, such as numerical aperture, or even obliterates the need for optical elements. For parts of the optical spectrum where imaging elements such as objectives are difficult to manufacture or image sensors cannot be miniaturized, computational imaging provides useful alternatives, in fields such as X-ray and THz radiations. === Common techniques === Among common computational imaging techniques are lensless imaging, computational speckle imaging , ptychography and Fourier ptychography. Computational imaging technique often draws on compressive sensing or phase retrieval techniques, where the angular spectrum of the object is reconstructed. Other techniques are related to the field of computational imaging, such as digital holography, computer vision and inverse problems such as tomography. == Computational processing == This is the processing of non-optically-coded images to produce new images. == Computational sensors == These are detectors that combine sensing and processing, typically in hardware, like the oversampled binary image sensor. == Early work in computer vision == Although computational photography is a currently popular buzzword in computer graphics, many of its techniques first appeared in the computer vision literature, either under other names or within papers aimed at 3D shape analysis. == Art history == Computational photography, as an art form, has been practiced by capturing differently exposed pictures of the same subject matter and combining them. This was the inspiration for the development of the wearable computer in the 1970s and early 1980s. Computational photography was inspired by the work of Charles Wyckoff, and thus computational photography datasets (e.g. differently exposed pictures of the same subject matter that are taken in order to make a single composite image) are sometimes referred to as Wyckoff Sets, in his honor. Early work in this area (joint estimation of image projection and exposure value) was undertaken by Mann and Candoccia. Charles Wyckoff devoted much of his life to creating special kinds of 3-layer photographic films that captured different exposures of the same subject matter. A picture of a nuclear explosion, taken on Wyckoff's film, appeared on the cover of Life Magazine and showed the dynamic range from the dark outer areas to the inner core.
Auto-defrost
Auto-defrost, automatic defrost or self-defrosting is a technique which regularly defrosts the evaporator in a refrigerator or freezer. Appliances using this technique are often called frost free, frostless, or no-frost. == Mechanism == The defrost mechanism in a refrigerator heats the cooling element (evaporator coil) for a short period of time and melts the frost that has formed on it. The resulting water drains through a duct at the back of the unit. Defrosting is controlled by an electric or electronic timer. For every 6, 8, 10, 12 or 24 hours of compressor operation, it turns on a defrost heater for 15 minutes to half an hour. The defrost heater, having a typical power rating of 350W to 600W, is often mounted just below the evaporator in top and bottom-freezer models. It can also be located below and in the middle of the evaporator in side-by-side models. It may be protected from short circuits by means of fusible links. In older refrigerators, the timer runs continuously. In newer designs, the timer only runs while the compressor runs, so the longer the refrigerator door is closed, the less time the heater will run for and the more energy is saved. A defrost thermostat opens the heater circuit when the evaporator temperature rises above a preset temperature, 40°F (5°C) or more, thereby preventing excessive heating of the freezer compartment. The defrost timer is such that either the compressor or the defrost heater is on, but not both at the same time. Inside the freezer, air is circulated by means of one or more fans. In a typical design cold air from the freezer compartment is ducted to the fresh food compartment and circulated back into the freezer compartment. Air circulation helps sublimate any ice or frost that may form on frozen items in the freezer compartment. While defrosting, this fan is stopped to prevent heated-up air from reaching the food compartment. Instead of the normal cooling elements being embedded in the freezer liner, auto-defrost elements are behind or beneath the liner. This allows them to be heated for short periods of time to dispose of frost, without heating the contents of the freezer. Alternatively, some systems use the hot gas in the condenser to defrost the evaporator. This is done by means of a circuit that is cross-linked by a three-way valve. The hot gas quickly heats up the evaporator and defrosts it. This system is primarily used in commercial applications such as ice-cream displays. == Application == While this technique was originally applied to the refrigerator compartment, it was later used for freezer compartment as well. A combined refrigerator/freezer which applies self-defrosting to the refrigerator compartment only is usually called "partial frost free" or semi-automatic defrost (some brands call these "Auto Defrost" while Frigidaire referred to their semi-automatic models as "Cycla-Matic," Kelvinator often named these models as "Cyclic Defrost" ). These refrigerators usually have a pan underneath where water from the melted frost in the refrigerator section evaporates. Freezers with automatic defrosting and combined refrigerator/freezer units which also apply self defrosting to their freezer compartment are called "frost free". The latter usually feature an air connection between the two compartments with the air passage to the refrigerator compartment regulated by a damper. By this means, a controlled portion of the air coming from the freezer reaches the refrigerator. Some older models have no air circulation between their freezer and refrigerator sections. Instead, they use an independent cooling system (for example: an evaporator coil with a defrost heater and a circulating fan in the freezer and a cold-plate or open-coil evaporator in the refrigerator. "Frost-Free" refrigerator/freezer units usually use a heating element to defrost their evaporators, a pan to collect and evaporate water from the frost that melts from the cold plate and/or evaporator coil, a timer which turns off the compressor and turns on the defrost element usually from once to 4 times a day for periods usually ranging from 15 to 30 minutes, a defrost limiter thermostat that turns off the heating element before the temperature rises too much while the timer is still in its defrost phase. Some models also feature a drain heater to prevent ice from blocking the drain. Other early types of refrigerators also use hot gas defrost instead of electric heaters. These reverse the evaporator and condenser sides for the defrost cycle. Some newer refrigerator/freezer models have a computer that monitors how many times each door is opened and uses this data to control defrost scheduling thereby reducing power use. == Advantages == No need to manually defrost the frost buildup, therefore power consumption will not increase with time. Food packaging is easier to see. Most frozen food will not stick together. Smells are limited, especially in total frost-free appliances because the air always circulates. Better temperature management. == Disadvantages == The system can be more expensive to run when usage is high and if the fan continues or starts to run when the door is opened. A thermal cutout safety device is required to prevent overheating of the heating element. Increased electrical and mechanical complexity compared to a basic upright freezer or chest freezer, making it more prone to component failure. The temperature of the freezer contents rises during the defrosting cycles, especially if there is a light load in the freezer. This can cause "freezer burn" on articles placed in the freezer, from partially defrosting, then re-freezing On hot, humid days condensation will sometimes form around the refrigerator doors. Defrosting may not be completed by the time the defrost timer cycles back to normal operation (especially in hot, humid conditions with frequent door openings), leaving ice/frost on the evaporator coils. This condition can lead to "icing" which will interfere with the operation of the refrigerator. In laboratories, self-defrosting freezers must not be used to store certain delicate reagents such as enzymes, because the temperature cycling can degrade them. In addition, water can evaporate out of containers that do not have a very tight seal, altering the concentration of the reagents. Self-defrosting freezers should never be used to store flammable chemicals.
Automatic acquisition of lexicon
Automatic acquisition of lexicon is a computerized process used for the development of a complex morphological lexicon of a language. The lexicon is essential for the NLP (Natural language processing), as well as a prerequisite to any wide-coverage parser. The two main requirements represent raw corpus and the morphological description of the language. The aim is to provide lemmas that will serve to the explanation of all the words that occur within the corpus. For the achievement of a quality lexicon it is necessary to manually validate the generated lemmas and iterate the whole process several times. The process is focused on the open word classes (e.g. nouns, adjectives, verbs). Closed classes (e.g. prepositions, pronouns, numerals) are excluded. This method is applicable to the languages with a rich morphology, such as Slovak, Russian or Croatian. Applied to Slovak, being an inflectional language, the automatic acquisition focuses on the inflectional morphology as well as on the derivational morphology. This fact enables the users to find out the information about derivational relations (e.g. adjectivizations, prefixes) in the lexicon. For example, Slovak word korpusový is an adjectivization of korpus (eng. corpus). == Three-step loop == Conformably to Benoît Sagot, there are three stages involved in the acquisition of lemmas: Generation and inflection Ranking Manual validation The more iteration will be performed, the more accurate lexicon will be obtained. For each iteration are essential the information given by a manual validator. === Generation and inflection === Firstly, all words which represent the closed word classes (pronouns, prepositions, numerals) are manually excluded from the given corpus. Number of their occurrences in the corpus is provided. Then the automatic generation comes, when the hypothetical lemmas according to the morphological description of a language are created. Generated lemmas are consequently being inflected, so that all of their inflected forms are built. Obtained forms are associated with the corresponding lemma and a morphological tag. === Ranking === There was created a probabilistic model, represented by a fix-point algorithm, to rank the hypothetical lemmas generated in the first step. Best ranked lemmas are expected to be ideally all correct, whereas the least ranked tend to be incorrect. === Manual validation === Correctness of the best- ranked lemmas created in the previous step are checked by the manual validator, who should be a native speaker. Lemmas are at this stage divided into three categories: valid lemmas, appended to lexicon erroneous lemmas generated by valid forms (later associated to another lemmas) erroneous lemmas generated by invalid forms (these need to be excluded) == Future development == Automatic acquisition, in comparison to a purely manual development of the lexicons, seems to be promising, considering the future development, because of the short validation time needed and the relatively small amount of human labor involved.