ChengXiang Zhai is a computer scientist. He is a Donald Biggar Willett Professor in Engineering in the Department of Computer Science at the University of Illinois at Urbana-Champaign. == Biography == Zhai received the BS (1984), MS (1987, under Guoliang Zheng), and PhD (1990, under Jiafu Xu) in Computer Science from Nanjing University. He spent 1990 to 1993 working at Nanjing University's State Key Laboratory for Novel Software Technology. In 1993, he left for America to pursue a second PhD, this time at Carnegie Mellon University (CMU) with David A. Evans. Evans then left to spend more time with the company ClariTech. Zhai obtained from CMU a MS (1997) in computational linguistics and then started working with John Lafferty. He finally received from CMU a PhD in Language and Information Technologies in 2002. Since then, he has been an Assistant Professor (2002–2008), Associate Professor (2008–2013), Professor (2013–2018), and Donald Biggar Willett Professor (2018–) at the UIUC Department of Computer Science. He also holds joint appointments with the Carl R. Woese Institute for Genomic Biology, Department of Statistics, and School of Information Sciences at UIUC. == Awards == ACM SIGIR Gerard Salton Award, 2021, "for significant and sustained contributions to information retrieval and data science. His work has defined many of the theoretical foundations of the language modeling approach, yielding major insights into areas such as smoothing methods, relevance feedback, topic diversification, and text representations that incorporate positional information. He and his collaborators have also pioneered the axiomatic approach to information retrieval, which continues to provide inspiration for retrieval model and evaluation research." ACM SIGIR Academy inductee, 2021 ACM Fellow, 2017, "for contributions to information retrieval and text data mining." ACM SIGIR Test of Time Award, 2016, for paper A study of smoothing methods for language models applied to Ad Hoc information retrieval ACM SIGIR Test of Time Award, 2016, for paper Document language models, query models, and risk minimization for information retrieval ACM SIGIR Test of Time Award, 2014, for paper Beyond independent relevance: methods and evaluation metrics for subtopic retrieval ACM Distinguished Member, 2009 Presidential Early Career Award for Scientists and Engineers (PECASE), 2004, "for his work on user-centered, adaptive intelligent information access. His techniques expect to improve search-engine performance, support better information organization and enable understanding of large volumes of information. Zhai's work in information retrieval is expected to enhance curricula and provide new educational tools for the growing information technology workforce." ACM SIGIR Best Paper Award, 2004, for paper A formal study of information retrieval heuristics == Personal == Zhai's son Alex has earned three medals at the International Mathematical Olympiad.
ELIZA
ELIZA is an early natural language processing computer program developed from 1964 to 1967 at MIT by Joseph Weizenbaum. Created to explore communication between humans and machines, ELIZA simulated conversation by using a pattern matching and substitution methodology that gave users an illusion of understanding on the part of the program, but gave no response that could be considered really understanding what was being said by either party. Whereas the ELIZA program itself was written (originally) in MAD-SLIP, the pattern matching directives that contained most of its language capability were provided in separate "scripts", represented in a Lisp-like expression. The most famous script, DOCTOR, simulated a psychotherapist of the Rogerian school (in which the therapist often reflects back the patient's words to the patient), and used rules, dictated in the script, to respond with non-directional questions to user inputs. As such, ELIZA was one of the first chatbots (originally "chatterbots") and one of the first programs capable of attempting the Turing test. Weizenbaum intended the program as a method to explore communication between humans and machines. He was surprised that some people, including his secretary, attributed human-like feelings to the computer program, a phenomenon that came to be called the ELIZA effect. Many academics believed that the program would be able to positively influence the lives of many people, particularly those with psychological issues, and that it could aid doctors working on such patients' treatment. While ELIZA was capable of engaging in discourse, it could not converse with true understanding. However, many early users were convinced of ELIZA's intelligence and understanding, despite Weizenbaum's insistence to the contrary. The original ELIZA source code had been missing since its creation in the 1960s, as it was not common to publish articles that included source code at that time. However, more recently the MAD-SLIP source code was discovered in the MIT archives and published on various platforms, such as the Internet Archive. The source code is of high historical interest since it demonstrates not only the specificity of programming languages and techniques at that time, but also the beginning of software layering and abstraction as a means of achieving sophisticated software programming. == Overview == Joseph Weizenbaum's ELIZA, running the DOCTOR script, created a conversational interaction somewhat similar to what might take place in the office of "a [non-directive] psychotherapist in an initial psychiatric interview" and to "demonstrate that the communication between man and machine was superficial". While ELIZA is best known for acting in the manner of a psychotherapist, the speech patterns are due to the data and instructions supplied by the DOCTOR script. ELIZA itself examined the text for keywords, applied values to said keywords, and transformed the input into an output; the script that ELIZA ran determined the keywords, set the values of keywords, and set the rules of transformation for the output. Weizenbaum chose to make the DOCTOR script in the context of psychotherapy to "sidestep the problem of giving the program a data base of real-world knowledge", allowing it to reflect back the patient's statements to carry the conversation forward. The result was a somewhat intelligent-seeming response that reportedly deceived some early users of the program. Weizenbaum named his program ELIZA after Eliza Doolittle, a working-class character in George Bernard Shaw's Pygmalion (also appearing in the musical My Fair Lady, which was based on the play and was hugely popular at the time). According to Weizenbaum, ELIZA's ability to be "incrementally improved" by various users made it similar to Eliza Doolittle, since Eliza Doolittle was taught to speak with an upper-class accent in Shaw's play. However, unlike the human character in Shaw's play, ELIZA is incapable of learning new patterns of speech or new words through interaction alone. Edits must be made directly to ELIZA's active script in order to change the manner by which the program operates. Weizenbaum first implemented ELIZA in his own SLIP list-processing language, where, depending upon the initial entries by the user, the illusion of human intelligence could appear, or be dispelled through several interchanges. Some of ELIZA's responses were so convincing that Weizenbaum and several others have anecdotes of users becoming emotionally attached to the program, occasionally forgetting that they were conversing with a computer. Weizenbaum's own secretary reportedly asked Weizenbaum to leave the room so that she and ELIZA could have a real conversation. Weizenbaum was surprised by this, later writing: "I had not realized ... that extremely short exposures to a relatively simple computer program could induce powerful delusional thinking in quite normal people." In 1966, interactive computing (via a teletype) was new. It was 11 years before the personal computer became familiar to the general public, and three decades before most people encountered attempts at natural language processing in Internet services like Ask.com or PC help systems such as Microsoft Office Clippit. Although those programs included years of research and work, ELIZA remains a milestone because it was the first time a programmer had attempted such a human-machine interaction with the goal of creating the illusion (however brief) of human–human interaction. At the ICCC 1972, ELIZA was brought together with another early artificial-intelligence program named PARRY for a computer-only conversation. While ELIZA was built to speak as a doctor, PARRY was intended to simulate a patient with schizophrenia. == Design and implementation == Weizenbaum originally wrote ELIZA in MAD-SLIP for CTSS on an IBM 7094 as a program to make natural-language conversation possible with a computer. To accomplish this, Weizenbaum identified five "fundamental technical problems" for ELIZA to overcome: the identification of key words, the discovery of a minimal context, the choice of appropriate transformations, the generation of responses in the absence of key words, and the provision of an editing capability for ELIZA scripts. Weizenbaum solved these problems and made ELIZA such that it had no built-in contextual framework or universe of discourse. However, this required ELIZA to have a script of instructions on how to respond to inputs from users. ELIZA starts its process of responding to an input by a user by first examining the text input for a "keyword". A "keyword" is a word designated as important by the acting ELIZA script, which assigns to each keyword a precedence number, or a RANK, designed by the programmer. If such words are found, they are put into a "keystack", with the keyword of the highest RANK at the top. The input sentence is then manipulated and transformed as the rule associated with the keyword of the highest RANK directs. For example, when the DOCTOR script encounters words such as "alike" or "same", it would output a message pertaining to similarity, in this case "In what way?", as these words had high precedence number. This also demonstrates how certain words, as dictated by the script, can be manipulated regardless of contextual considerations, such as switching first-person pronouns and second-person pronouns and vice versa, as these too had high precedence numbers. Such words with high precedence numbers are deemed superior to conversational patterns and are treated independently of contextual patterns. Following the first examination, the next step of the process is to apply an appropriate transformation rule, which includes two parts: the "decomposition rule" and the "reassembly rule". First, the input is reviewed for syntactical patterns in order to establish the minimal context necessary to respond. Using the keywords and other nearby words from the input, different disassembly rules are tested until an appropriate pattern is found. Using the script's rules, the sentence is then "dismantled" and arranged into sections of the component parts as the "decomposition rule for the highest-ranking keyword" dictates. The example that Weizenbaum gives is the input "You are very helpful", which is transformed to "I are very helpful". This is then broken into (1) empty (2) "I" (3) "are" (4) "very helpful". The decomposition rule has broken the phrase into four small segments that contain both the keywords and the information in the sentence. The decomposition rule then designates a particular reassembly rule, or set of reassembly rules, to follow when reconstructing the sentence. The reassembly rule takes the fragments of the input that the decomposition rule had created, rearranges them, and adds in programmed words to create a response. Using Weizenbaum's example previously stated, such a reassembly rule would take the fragments and apply them to the phrase "What makes
Biorobotics
Biorobotics is an interdisciplinary science that combines the fields of biomedical engineering, cybernetics, and robotics to develop new technologies that integrate biology with mechanical systems to develop more efficient communication, alter genetic information, and create machines that imitate biological systems. == Cybernetics == Cybernetics focuses on the communication and system of living organisms and machines that can be applied and combined with multiple fields of study such as biology, mathematics, computer science, engineering, and much more. This discipline falls under the branch of biorobotics because of its combined field of study between biological bodies and mechanical systems. Studying these two systems allows for advanced analysis on the functions and processes of each system as well as the interactions between them. === History === Cybernetic theory is a concept that has existed for centuries, dating back to the era of Plato where he applied the term to refer to the "governance of people". The term cybernetique is seen in the mid-1800s used by physicist André-Marie Ampère. The term cybernetics was popularized in the late 1940s to refer to a discipline that touched on, but was separate, from established disciplines, such as electrical engineering, mathematics, and biology. === Science === Cybernetics is often misunderstood because of the breadth of disciplines it covers. In the early 20th century, it was coined as an interdisciplinary field of study that combines biology, science, network theory, and engineering. Today, it covers all scientific fields with system related processes. The goal of cybernetics is to analyze systems and processes of any system or systems in an attempt to make them more efficient and effective. === Applications === Cybernetics is used as an umbrella term so applications extend to all systems related scientific fields such as biology, mathematics, computer science, engineering, management, psychology, sociology, art, and more. Cybernetics is used amongst several fields to discover principles of systems, adaptation of organisms, information analysis and much more. == Genetic engineering == Genetic engineering is a field that uses advances in technology to modify biological organisms. Through different methods, scientists are able to alter the genetic material of microorganisms, plants and animals to provide them with desirable traits. For example, making plants grow bigger, better, and faster. Genetic engineering is included in biorobotics because it uses new technologies to alter biology and change an organism's DNA for their and society's benefit. === History === Although humans have modified genetic material of animals and plants through artificial selection for millennia (such as the genetic mutations that developed teosinte into corn and wolves into dogs), genetic engineering refers to the deliberate alteration or insertion of specific genes to an organism's DNA. The first successful case of genetic engineering occurred in 1973 when Herbert Boyer and Stanley Cohen were able to transfer a gene with antibiotic resistance to a bacterium. === Science === There are three main techniques used in genetic engineering: The plasmid method, the vector method and the biolistic method. ==== Plasmid method ==== This technique is used mainly for microorganisms such as bacteria. Through this method, DNA molecules called plasmids are extracted from bacteria and placed in a lab where restriction enzymes break them down. As the enzymes do this, some develop a rough edge that resembles that of a staircase which is considered 'sticky' and capable of reconnecting. These 'sticky' molecules are inserted into another bacteria where they will connect to the DNA rings with the altered genetic material. ==== Vector method ==== The vector method is considered a more precise technique than the plasmid method as it involves the transfer of a specific gene instead of a whole sequence. In the vector method, a specific gene from a DNA strand is isolated through restriction enzymes in a laboratory and is inserted into a vector. Once the vector accepts the genetic code, it is inserted into the host cell where the DNA will be transferred. ==== Biolistic method ==== The biolistic method is typically used to alter the genetic material of plants. This method embeds the desired DNA with a metallic particle such as gold or tungsten in a high speed gun. The particle is then bombarded into the plant. Due to the high velocities and the vacuum generated during bombardment, the particle is able to penetrate the cell wall and inserts the new DNA into the cell. === Applications === Genetic engineering has many uses in the fields of medicine, research and agriculture. In the medical field, genetically modified bacteria are used to produce drugs such as insulin, human growth hormones and vaccines. In research, scientists genetically modify organisms to observe physical and behavioral changes to understand the function of specific genes. In agriculture, genetic engineering is extremely important as it is used by farmers to grow crops that are resistant to herbicides and to insects such as BTCorn. == Bionics == Bionics is a medical engineering field and a branch of biorobotics consisting of electrical and mechanical systems that imitate biological systems, such as prosthetics and hearing aids. It's a portmanteau that combines biology and electronics. === History === The history of bionics goes as far back in time as ancient Egypt. A prosthetic toe made out of wood and leather was found on the foot of a mummy. The time period of the mummy corpse was estimated to be from around the fifteenth century B.C. Bionics can also be witnessed in ancient Greece and Rome. Prosthetic legs and arms were made for amputee soldiers. In the early 16th century, a French military surgeon by the name of Ambroise Pare became a pioneer in the field of bionics. He was known for making various types of upper and lower prosthetics. One of his most famous prosthetics, Le Petit Lorrain, was a mechanical hand operated by catches and springs. During the early 19th century, Alessandro Volta further progressed bionics. He set the foundation for the creation of hearing aids with his experiments. He found that electrical stimulation could restore hearing by inserting an electrical implant to the saccular nerve of a patient's ear. In 1945, the National Academy of Sciences created the Artificial Limb Program, which focused on improving prosthetics since there were a large number of World War II amputee soldiers. Since this creation, prosthetic materials, computer design methods, and surgical procedures have improved, creating modern-day bionics. === Science === ==== Prosthetics ==== The important components that make up modern-day prosthetics are the pylon, the socket, and the suspension system. The pylon is the internal frame of the prosthetic that is made up of metal rods or carbon-fiber composites. The socket is the part of the prosthetic that connects the prosthetic to the person's missing limb. The socket consists of a soft liner that makes the fit comfortable, but also snug enough to stay on the limb. The suspension system is important in keeping the prosthetic on the limb. The suspension system is usually a harness system made up of straps, belts or sleeves that are used to keep the limb attached. The operation of a prosthetic could be designed in various ways. The prosthetic could be body-powered, externally-powered, or myoelectrically powered. Body-powered prosthetics consist of cables attached to a strap or harness, which is placed on the person's functional shoulder, allowing the person to manipulate and control the prosthetic as he or she deems fit. Externally-powered prosthetics consist of motors to power the prosthetic and buttons and switches to control the prosthetic. Myoelectrically powered prosthetics are new, advanced forms of prosthetics where electrodes are placed on the muscles above the limb. The electrodes will detect the muscle contractions and send electrical signals to the prosthetic to move the prosthetic. The downside to this type of prosthetic is that if the sensors are not placed correctly on the limb then the electrical impulses will fail to move the prosthetic. TrueLimb is a specific brand of prosthetics that uses myoelectrical sensors which enable a person to have control of their bionic limb. ==== Hearing aids ==== Four major components make up the hearing aid: the microphone, the amplifier, the receiver, and the battery. The microphone takes in outside sound, turns that sound to electrical signals, and sends those signals to the amplifier. The amplifier increases the sound and sends that sound to the receiver. The receiver changes the electrical signal back into sound and sends the sound into the ear. Hair cells in the ear will sense the vibrations from the sound, convert the vibrations into nerve signals, and send it to the brain so
Scan line
A scan line (also scanline) is one line, or row, in a raster scanning pattern, such as a line of video on a cathode-ray tube (CRT) display of a television set or computer monitor. On CRT screens the horizontal scan lines are visually discernible, even when viewed from a distance, as alternating colored lines and black lines, especially when a progressive scan signal with below maximum vertical resolution is displayed. This is sometimes used today as a visual effect in computer graphics. The term is used, by analogy, for a single row of pixels in a raster graphics image. Scan lines are important in representations of image data, because many image file formats have special rules for data at the end of a scan line. For example, there may be a rule that each scan line starts on a particular boundary (such as a byte or word; see for example BMP file format). This means that even otherwise compatible raster data may need to be analyzed at the level of scan lines in order to convert between formats.
Chasys Photo
Chasys Photo (previously called Chasys Draw Artist, then Chasys Draw IES) is a suite of applications including a layer-based raster graphics editor with adjustment layers, linked layers, timeline and frame-based animation, icon editing, image stacking and comprehensive plug-in support (Chasys Draw IES Artist), a fast multi-threaded image file converter (Chasys Draw IES Converter) and a fast image viewer (Chasys Draw IES Viewer), with RAW image support in all components. It supports the native file formats of several competitors including Adobe Photoshop, Affinity Photo, Corel Photo-Paint, GIMP, Krita, Paint.NET and PaintShop Pro, and the whole suite is designed to make effective use of multi-core processors, touch-screens and pen-input devices. The software is developed by John Paul Chacha in Nairobi, Kenya. Chasys Draw IES is currently released as freeware, and is available for computers running Microsoft Windows operating systems. It is available in three distributions: the standard distro, a portable version and a Microsoft Store version. The suite is coded in a blend of C, C++ and assembly language. It runs on x86 processors and supports the MMX, SSE, SSE2, S-SSE3, and SSE4.1 instruction sets. == History == Chasys Draw is a project that was started in November 2001 by John Paul Chacha, mostly as a hobby than anything else. The original Chasys Draw was a rather simple bitmap editor done in Visual Basic, a lot like MS Paint save for its ability to do gradients. This application underwent many changes, eventually leading up to Chasys Draw 5. This was the first version to have its own native format, referred to simply as CD5. Major updates to the graphics code in May 2002 resulted in Chasys Draw DTFx (Direct Tool eFfects). The new graphics code being referred to here was actually a miniature bitmap abstraction engine that allowed for fast per-pixel operations and direct image buffer access (much as the DIB engine does for GDI). The engine was named JpDRAW. This version was also done in VB, but was much faster than all the previous versions. The new graphics code allowed for more tools to be implemented than was ever possible before. Later on in 2002, the developer decided to completely abandon VB as a programming platform and moved all the code to C/C++. The move to C/C++ allowed the development of a full-fledged graphics engine which was named JpDRAW2. Chasys was renamed to Chasys Draw Artist, and the CD5 image format was also updated to reflect the new features. By coincidence, the module that implemented the file format was the fifth module to be added, so the format was called Chasys Draw module 5, retaining the .cd5 file extension. First public release In April 2004, Chasys Draw Artist was released to the public via the internet for the first time (version 1.27). The release was done via betanews). In 2005, Chasys Draw underwent major user interface changes as well as internal changes. By December of that year, the project had reached version 1.63. This was the first version to introduce advanced features such as anti-aliasing. It was also the first version with full support for alpha channels. The CD5 image format was also upgraded to version 2, adding advanced compression, full alpha channels, encryption and metadata. Version 1.63 was the first version to win an IEEE (Kenya chapter) award in ICT. The "chazy-glass" interface, from which the all later versions' user interfaces borrowed, was introduced in version 1.80. Chasys Draw Artist adopted photo editing features in version 2.01. Comprehensive tutorials were added and many features were re-designed to make them easier to use. Multi-threading was introduced to accelerate some tasks, such as the improved auto-save engine. Utilities such as a converter and browser were added. Version 2.43 of Chasys Draw Artist was quietly released to the public in late 2007 without any announcements. It featured many fixes to the formal version 2.42, as well as many new features. The quiet release was due to a decision to re-build Chasys Draw Artist from scratch, while still continuing support for the old architecture. An experimental version 2.45 was released only to beta-testers for the purpose of testing new technologies that would be included in the new architecture and was officially withdrawn in May 2008. During the time when the versions 2.43~2.45 were being released, work was underway to create a new layer-based Chasys Draw, which was released as Chasys Draw IES (Image Editing Suite), with the initial version number 2.50. A new multi-layer tag-based image format was created to support layering and blending modes; this was named CD5 v3. The next version introduced animation and multi-resolution support as editing modes, and the next one brought in an unlimited undo engine, new plug-ins and several internal fixes. Further development led to the introduction of super-resolution and image stacking, support for video and video capture, Anti-aliasing, metadata save and restore, a "Pen and Path" tool, physical measurement specification, and a video sequence composer engine. The user interface was enhanced with adaptive scrolling and the auto-save engine was optimized. Some memory management was added for machines with low RAM. By version 2.60, Chasys Draw IES was capable of loading Photoshop's PSD files, as well as load and save JPEG 2000. This version also had shell integration with thumbnails and application-level support for multi-monitor display setups. Metadata was extended to support save, restore and scaling for text formatting and path data. There was also a new palette with exchangeable swatches, loadable from all kinds of palette files. A slicing tool for web and user interface design was also included. A C++ code module output for inline image generation was added, as was a constrained recolor brush. The concept of a "fully anti-aliased work-flow" was introduced in version 2.62, in which all drawing and selection tools were anti-aliased by default. Support for Photoshop plug-ins using Adobe's 8bf format was added in version 2.66, allowing users to utilize thousands of free plug-ins available online. Equivalents for the Pantone palettes (PMS 100 to 814-2x) were added, and the "Just-in-Time" memory compressor significantly reduced the editor's memory requirements. First freeware release Chasys Draw IES went freeware on 6 June 2009. With the coming of the freeware IES, two blending modes (Hue and Chroma) were added. Textures were improved to allow multiple layer-based textures. The TextArt G3 engine was enhanced with LINK metadata, and alpha shift was improved. IES 2.72 added the Luma Wand tool, fixed PNG and TIFF transparency issues, and fixed Smart-Paste transparency. IES 2.74 introduced alpha protection, and 2.75 followed with a new adjustments engine that faced out many effects implemented by the effects engine. The adjustments engine was designed to appeal to experienced image editors. IES 2.76 introduced a new transform engine and the Resizer for IES plug-in supporting multi-core and 18 scaling methods, including customizable windowed Sinc interpolation. IES 2.77 added Greyscale with Tint adjustment, separated the Lock and Click-Thru layer properties, extended the Cloning Brush with three options (this, below and composite) and also extended the Color Picker with multiple point sampling. IES 3.01 brought a new look and many breakthrough tools to the suite. It was geared toward touch and was fully compatible with Windows 7. The toolbox was reorganized, with some tools being grouped and new ones added. Some message boxes were replaced with a new popup system, and the working of the workspace was changed to use a back-blitter, which enabled the addition of new blending modes, Screen and Mask. The printing interface was modified and given accurate proofing. Alpha Function Adjustment was added and a new Anti-Quantization Engine included for all adjustments to remove the need for 16 bits per channel editing. An internal clipboard was created to cater for copying images that are too large for the Windows clipboard, and translucency full-page gradients added. Some new tutorials were added and keyboard shortcuts made configurable. IES 3.05 brought the power of custom full-page gradients to the suite, supporting .ggr, .grd and .gra gradients. New gradient styles were included, as was support for Adobe color tables (.act), palette previewing, point color editing and a highly improved TextArt engine. Digital lightroom IES 3.11 was introduced on 14 December 2009. It was done on a new development base and added a new application, raw-Input. This was a RAW image format processor based on dcraw. This application allowed the use of Chasys Draw IES in processing digital negatives, which are popular with professional photographers. Chasys Draw IES 3.24 was released with a re-designed user interface, powered by a higher performance graphics core and better memory management. A history palette w
Himmat (app)
Himmat is a women's safety mobile application of Delhi Police. It was launched by Home Minister Rajnath Singh on 1 January 2015. The app is freely available for Android mobile phones and can be downloaded from Delhi Police website. Delhi Police plans to launch app for other platforms in future. Low registrations and other problems resulted in a parliamentary panel calling the app a failure in 2018. Himmat has gone on to be called as one of India's best safety apps for women.
Comparison of vector graphics editors
A number of vector graphics editors exist for various platforms. Potential users of these editors will make comparisons based on factors such as the availability for the user's platform, the software license, the feature set, the merits of the user interface (UI) and the focus of the program. Some programs are more suitable for artistic work while others are better for technical drawings. Another important factor is the application's support of various vector and bitmap image formats for import and export. The tables in this article compare general and technical information for a number of vector graphics editors. See the article on each editor for further information. This article is neither all-inclusive nor necessarily up-to-date. == Some editors in detail == Adobe Fireworks (formerly Macromedia Fireworks) is a vector editor with bitmap editing capabilities with its main purpose being the creation of graphics for Web and screen. Fireworks supports RGB color scheme and has no CMYK support. This means it is mostly used for screen design. The native Fireworks file format is editable PNG (FWPNG or PNG). Adobe Fireworks has a competitive price, but its features can seem limited in comparison with other products. It is easier to learn than other products and can produce complex vector artwork. The Fireworks editable PNG file format is not supported by other Adobe products. Fireworks can manage the PSD and AI file formats which enables it to be integrated with other Adobe apps. Fireworks can also open FWPNG/PNG, PSD, AI, EPS, JPG, GIF, BMP, TIFF file formats, and save/export to FWPNG/PNG, PSD, AI (v.8), FXG (v.2.0), JPG, GIF, PDF, SWF and some others. Some support for exporting to SVG is available via a free Export extension. On May 6, 2013, Adobe announced that Fireworks would be phased out. Adobe Flash (formerly a Macromedia product) has straightforward vector editing tools that make it easier for designers and illustrators to use. The most important of these tools are vector lines and fills with bitmap-like selectable areas, simple modification of curves via the "selection" or the control points/handles through "direct selection" tools. Flash uses Actionscript for OOP, and has full XML functionality through E4X support. Adobe FreeHand (formerly Macromedia Freehand and Aldus Freehand) is mainly used by professional graphic designers. The functionality of FreeHand includes the flexibility of the application in the wide design environment, catering to the output needs of both traditional image reproduction methods and to contemporary print and digital media with its page-layout capabilities and text attribute controls. Specific functions of FreeHand include a superior image-tracing operation for vector editing, page layout features within multiple-page documents, and embedding custom print-settings (such as variable halftone-screen specifications within a single graphic, etc.) to each document independent of auxiliary printer-drivers. User-operation is considered to be more suited for designers with an artistic background compared to designers with a technical background. When being marketed, FreeHand lacked the promotional backing, development and PR support in comparison to other similar products. FreeHand was transferred to the classic print group after Macromedia was purchased by Adobe in 2005. On May 16, 2007, Adobe announced that no further updates to Freehand would be developed but continues to sell FreeHand MX as a Macromedia product. FreeHand continues to run on Mac OS X Snow Leopard (using an Adobe fix) and on Windows 7. For macOS, Affinity Designer is able to open version 10 & MX Freehand files. Adobe Illustrator is a commonly used editor because of Adobe's market dominance, but is more expensive than other similar products. It is primarily developed consistently in line with other Adobe products and is best integrated with Adobe's Creative Suite packages. The ai file format is proprietary, but some vector editors can open and save in that format. Illustrator imports over two dozen formats, including PSD, PDF and SVG, and exports AI, PDF, SVG, SVGZ, GIF, JPG, PNG, WBMP, and SWF. However, the user must be aware of unchecking the "Preserve Illustrator Editing Capabilities" option if generating interoperable SVG files is desired. Affinity Designer by Serif Europe (the successor to their previous product, DrawPlus) is non-subscription-based software that is often described as an alternative to Adobe Illustrator. The application can open Portable Document Format (PDF), Adobe Photoshop, and Adobe Illustrator files, as well as export to those formats and to the Scalable Vector Graphics (SVG) and Encapsulated PostScript (EPS) formats. It also supports import from some Adobe Freehand files (specifically versions 10 & MX). Apache OpenOffice Draw is the vector graphics editor of the Apache OpenOffice open source office suite. It supports many import and export file formats and is available for multiple desktop operating systems. Boxy SVG is a chromium-based vector graphics editor for creating illustrations, as well as logos, icons, and other elements of graphic design. It is primarily focused on editing drawings in the SVG file format. The program is available as both a web app and a desktop application for Windows, macOS, ChromeOS, and Linux-based operating systems. Collabora Online Draw is the vector graphics editor of the Collabora Online open source office suite. It supports many import and export file formats and is accessible via any modern web browser, it also supports desktop editing features, Collabora Office is available for desktop and mobile operating systems, it is the enterprise ready version of LibreOffice. ConceptDraw PRO is a business diagramming tool and vector graphics editor available for both Windows and macOS. It supports multi-page documents, and includes an integrated presentation mode. ConceptDraw PRO supports imports and exports several formats, including Microsoft Visio and Microsoft PowerPoint. Corel Designer (originally Micrografx Designer) is one of the earliest vector-based graphics editors for the Microsoft Windows platform. The product is mainly used for the creation of engineering drawings and is shipped with extensive libraries for the needs of engineers. It is also flexible enough for most vector graphics design applications. CorelDRAW is an editor used in the graphic design, sign making and fashion design industries. CorelDRAW is capable of limited interoperation by reading file formats from Adobe Illustrator. CorelDRAW has over 50 import and export filters, on-screen and dialog box editing and the ability to create multi-page documents. It can also generate TrueType and Type 1 fonts, although refined typographic control is better suited to a more specific application. Some other features of CorelDRAW include the creation and execution of VBA macros, viewing of colour separations in print preview mode and integrated professional imposing options. Dia is a free and open-source diagramming and vector graphics editor available for Windows, Linux and other Unix-based computer operating systems. Dia has a modular design and several shape packages for flowcharting, network diagrams and circuit diagrams. Its design was inspired by Microsoft Visio, although it uses a Single Document Interface similar to other GNOME software (such as GIMP). DrawPlus, first built for the Windows platform in 1993, has matured into a full featured vector graphics editor for home and professional users. Also available as a feature-limited free 'starter edition': DrawPlus SE. DrawPlus developers, Serif Europe, have now ceased its development in order to focus on its successor, Affinity Designer. Edraw Max is a cross-platform diagram software and vector graphics editor available for Windows, Mac and Linux. It supports kinds of diagram types. It supports imports and exports SVG, PDF, HTML, Multiple page TIFF, Microsoft Visio and Microsoft PowerPoint. Embroidermodder is a free machine embroidery software tool that supports a variety of formats and allows the user to add custom modifications to their embroidery designs. Fatpaint is a free, light-weight, browser-based graphic design application with built-in vector drawing tools. It can be accessed through any browser with Flash 9 installed. Its integration with Zazzle makes it particularly suitable for people who want to create graphics for custom printed products such as T-shirts, mugs, iPhone cases, flyers and other promotional products. Figma is a collaborative web-based online vector graphics editor, used primarily for UX design and prototyping. GIMP, which works mainly with raster images, offers a limited set of features to create and record SVG files. It can also load and handle SVG files created with other software like Inkscape. Inkscape is a free and open-source vector editor with the primary native format being SVG. Inkscape is available for Linux, Windows, Mac OS X, and