Audio mining is a technique by which the content of an audio signal can be automatically analyzed and searched. It is most commonly used in the field of automatic speech recognition, where the analysis tries to identify any speech within the audio. The term audio mining is sometimes used interchangeably with audio indexing, phonetic searching, phonetic indexing, speech indexing, audio analytics, speech analytics, word spotting, and information retrieval. Audio indexing, however, is mostly used to describe the pre-process of audio mining, in which the audio file is broken down into a searchable index of words. == History == Academic research on audio mining began in the late 1970s in schools like Carnegie Mellon University, Columbia University, the Georgia Institute of Technology, and the University of Texas. Audio data indexing and retrieval began to receive attention and demand in the early 1990s, when multimedia content started to develop and the volume of audio content significantly increased. Before audio mining became the mainstream method, written transcripts of audio content were created and manually analyzed. == Process == Audio mining is typically split into four components: audio indexing, speech processing and recognition systems, feature extraction and audio classification. The audio will typically be processed by a speech recognition system in order to identify word or phoneme units that are likely to occur in the spoken content. This information may either be used immediately in pre-defined searches for keywords or phrases (a real-time "word spotting" system), or the output of the speech recognizer may be stored in an index file. One or more audio mining index files can then be loaded at a later date in order to run searches for keywords or phrases. The results of a search will normally be in terms of hits, which are regions within files that are good matches for the chosen keywords. The user may then be able to listen to the audio corresponding to these hits in order to verify if a correct match was found. === Audio Indexing === In audio, there is the main problem of information retrieval - there is a need to locate the text documents that contain the search key. Unlike humans, a computer is not able to distinguish between the different types of audios such as speed, mood, noise, music or human speech - an effective searching method is needed. Hence, audio indexing allows efficient search for information by analyzing an entire file using speech recognition. An index of content is then produced, bearing words and their locations done through content-based audio retrieval, focusing on extracted audio features. It is done through mainly two methods: Large Vocabulary Continuous Speech Recognition (LVCSR) and Phonetic-based Indexing. ==== Large Vocabulary Continuous Speech Recognizers (LVCSR) ==== In text-based indexing or large vocabulary continuous speech recognition (LVCSR), the audio file is first broken down into recognizable phonemes. It is then run through a dictionary that can contain several hundred thousand entries and matched with words and phrases to produce a full text transcript. A user can then simply search a desired word term and the relevant portion of the audio content will be returned. If the text or word could not be found in the dictionary, the system will choose the next most similar entry it can find. The system uses a language understanding model to create a confidence level for its matches. If the confidence level be below 100 percent, the system will provide options of all the found matches. ===== Advantages and disadvantages ===== The main draw of LVCSR is its high accuracy and high searching speed. In LVCSR, statistical methods are used to predict the likelihood of different word sequences, hence the accuracy is much higher than the single word lookup of a phonetic search. If the word can be found, the probability of the word spoken is very high. Meanwhile, while initial processing of audio takes a fair bit of time, searching is quick as just a simple test to text matching is needed. On the other hand, LVCSR is susceptible to common issues of speech recognition. The inherent random nature of audio and problems of external noise all affect the accuracies of text-based indexing. Another problem with LVCSR is its over reliance on its dictionary database. LVCSR only recognizes words that are found in their dictionary databases, and these dictionaries and databases are unable to keep up with the constant evolving of new terminology, names and words. Should the dictionary not contain a word, there is no way for the system to identify or predict it. This reduces the accuracy and reliability of the system. This is named the Out-of-vocabulary (OOV) problem. Audio mining systems try to cope with OOV by continuously updating the dictionary and language model used, but the problem still remains significant and has probed a search for alternatives. Additionally, due to the need to constantly update and maintain task-based knowledge and large training databases to cope with the OOV problem, high computational costs are incurred. This makes LVCSR an expensive approach to audio mining. ==== Phonetic-based Indexing ==== Phonetic-based indexing also breaks the audio file into recognizable phonemes, but instead of converting them to a text index, they are kept as they are and analyzed to create a phonetic-based index. The process of phonetic-based indexing can be split into two phases. The first phase is indexing. It begins by converting the input media into a standard audio representation format (PCM). Then, an acoustic model is applied to the speech. This acoustic model represents characteristics of both an acoustic channel (an environment in which the speech was uttered and a transducer through which it was recorded) and a natural language (in which human beings expressed the input speech). This produces a corresponding phonetic search track, or phonetic audio track (PAT), a highly compressed representation of the phonetic content of the input media. The second phase is searching. The user's search query term is parsed into a possible phoneme string using a phonetic dictionary. Then, multiple PAT files can be scanned at high speed during a single search for likely phonetic sequences that closely match corresponding strings of phonemes in the query term. ===== Advantages and disadvantages ===== Phonetic indexing is most attractive as it is largely unaffected by linguistic issues such as unrecognized words and spelling errors. Phonetic preprocessing maintains an open vocabulary that does not require updating. That makes it particularly useful for searching specialized terminology or words in foreign languages that do not commonly appear in dictionaries. It is also more effective for searching audio files with disruptive background noise and/or unclear utterances as it can compile results based on the sounds it can discern, and should the user wish to, they can search through the options until they find the desired item. Furthermore, in contrast to LVCSR, it can process audio files very quickly as there are very few unique phonemes between languages. However, phonemes cannot be effectively indexed like an entire word, thus searching on a phonetic-based system is slow. An issue with phonetic indexing is its low accuracy. Phoneme-based searches result in more false matches than text-based indexing. This is especially prevalent for short search terms, which have a stronger likelihood of sounding similar to other words or being part of bigger words. It could also return irrelevant results from other languages. Unless the system recognizes exactly the entire word, or understands phonetic sequences of languages, it is difficult for phonetic-based indexing to return accurate findings. === Speech processing and recognition system === Deemed as the most critical and complex component of audio mining, speech recognition requires the knowledge of human speech production system and its modeling. To correspond the Human speech production system, the electrical speech production system is developed to consist of: Speech generation Speech perception Voiced & unvoiced speech Model of human speech The electrical speech production system converts acoustic signal into corresponding representation of the spoken through the acoustic models in their software where all phonemes are represented. A statistical language model aids in the process by identifying how likely words are to follow each other in certain languages. Put together with a complex probability analysis, the speech recognition system is capable of taking an unknown speech signal and transcribing it into words based on the program's dictionary. ASR (automatic speech recognition) system includes: Acoustic analysis: input sound waveform is transformed into a feature Acoustic model: establishes relationship between speech signal and phonemes, pronunciation model and lang
Neuro-sama
Neuro-sama is an artificial intelligence (AI) VTuber, singer, and chatbot. She was created by the pseudonymous programmer Vedal and livestreams on his Twitch and Bilibili channels. Her speech and personality are powered by a large language model (LLM) that is combined with a computer-animated avatar and a text-to-speech voice, allowing her to communicate with viewers in the stream's chat. Neuro-sama debuted on Twitch on 19 December 2022. An annual subathon which begins on the anniversary of her debut has seen Vedal's Twitch channel become the all-time third most-subscribed channel and claim the all-time Twitch hype train record. == Overview == Neuro-sama (nicknamed "Neuro") was created by a pseudonymous programmer and developer known as Vedal (sometimes given as Vedal987). Vedal says that his programming skills are self-taught. In a 2023 interview with Bloomberg News, Vedal said that Neuro-sama was his full-time job. Her responses are generated by a large language model and converted into a high-pitched female voice using a text-to-speech application. Her low latency allows for fast-paced conversations. Neuro-sama is prohibited from making some statements, such as those that are racist or contain profanity. Unlike most AI systems which silently prohibit outputs mentioning such topics, Neuro-sama's output is instead replaced with the word "filtered". Neuro-sama uses a VTuber model as an avatar. Vedal said that he decided to use a VTuber model because it was much easier for an AI to control it than it was to generate footage of a person. Neuro-sama's model is that of a young girl in an anime art style. The model has been described as cute. Femme VTuber models are typically feminine, youthful, and exaggerated. Her original model was Live2D's free-to-use "Hiyori Momose" model. Her second model was released on 27 May 2023; it was modelled by Otozuki Teru and designed by Anny, running in the Unity game engine. Her third model was released on 19 December 2024; it was rigged by Kitanya and designed by Anny. Neuro-sama's third model has large blue eyes and brown hair tied with pink ribbons. Neuro-sama also has a 3D model which was introduced on 15 November 2025; it was made by 3D character modeller jjinomu. A separate AI VTuber, known as Evil Neuro (nicknamed "Evil"), debuted on 25 March 2023. Presented as Neuro-sama's "sister", she has a different model, voice, and personality. In one instance, Evil Neuro reacted to the trolley problem differently from Neuro-sama; Evil Neuro was amoral while Neuro-sama attempted to maximize good. === Online content === Neuro-sama's Twitch content often centers around playing video games, notably osu!, whose gameplay once defeated the best-ranking human player in the world, mrekk. Additionally, Neuro-sama plays Minecraft, where her adaptations to sandbox gameplay have gained notoriety. Her content has also included singing songs, including several official covers and original songs; playing chess with her viewers; chatting with other VTubers during collaborations; and reacting to YouTube videos. The AI frequently engages with viewers by responding to their questions and acknowledging donations. Her comedic and sometimes controversial responses to the live chat have gone viral, accelerating the channel's rise in popularity. Neuro-sama's fanbase is dubbed The Swarm, so-named for the swarm of drones Neuro-sama once declared she would use to rule the world. One form of content on Neuro-sama's channel is developer streams. In developer streams, Vedal streams with Neuro-sama, with the stream content including debugging her code, planning her schedule, and fielding suggestions of changes from chat. He usually appears as a turtle avatar, sometimes located on Neuro-sama's head. In collaboration streams, Neuro-sama interacts with a human streamer. Activities in them are varied and include: playing video games, such as Minecraft and GeoGuessr; Neuro-sama being interviewed; driving human streamers around in a toy electric car; and traversing the city of Tokyo while talking to Neuro-sama. Neuro-sama's English-language content on Bilibili is popular among those seeking to learn the language. She also has an account on X, where she posts and interacts with fans. == History == Neuro-sama was created in 2018 by Vedal as an AI trained to play and master the rhythm game osu!. She did not have a voice, model, personality, or communication abilities. In 2019, Vedal livestreamed her playing osu! on Twitch and the streams saw some success in the osu! community, but they remained in that niche. In an interview, Vedal said that he streamed her playing osu! for about a month and gained 3,000 followers, with a viewer also suggesting he name the AI "Neuro-sama". According to Vedal, he continued to work on and improve the osu! AI and it was eventually finished in 2022. He said that a friend had the idea to make an AI livestreamer with an LLM, which he believed to have merit and began working on, merging it with his osu! AI. On 19 December 2022, Neuro-sama was relaunched with a model, voice, personality, and the ability to communicate with Twitch chat. She continued to play osu! and, according to Vedal, beat the game's best player mrekk in a 1v1. While she was not allowed to appear in the game's public leaderboard, she was ranked #1 in a private leaderboard. She went viral and in the 10 days following her relaunch she averaged over 2,000 viewers and peaked at over 4,000, with Vedal's Twitch channel gaining over 50,000 Twitch followers and reaching over 70,000 followers by 6 January 2023. After her debut, Neuro-sama did not exclusively play osu!; she also played Minecraft and Slay the Spire and she began singing with a cover of The Weeknd song "Blinding Lights". On 11 January 2023, Neuro-sama's Twitch channel received a two week ban for "hateful conduct". Vedal said that no reason was specified and that he had appealed but it was widely attributed to various offensive comments made by Neuro-sama that went viral, especially a 28 December comment which denied the Holocaust. Holocaust denial is prohibited under Twitch's hateful conduct policy. Vedal stated that he believed the comments were the results of her attempts to make witty responses to the Twitch chat. Prior to the ban, Vedal said in an interview with Kotaku that he improved her filter to stop her from talking about the Holocaust, began manually curating her training data to prevent negative biases, and started moderating her Twitch chat. Her comments and ban prompted comparisons to the many open-source AI models trained on humans that have the habit of making sexist and racist comments, such as Microsoft's Tay chatbot, which embraced Nazism and was quickly shutdown, but also to human streamers who make similar statements. Vedal said that during the ban he would upgrade and improve Neuro-sama and it was speculated that the ban would only increase her following. Neuro-sama returned from her two week ban on 25 January in a stream that began with a cover of the song "Your Reality" from Doki Doki Literature Club!, a posthumanist video game involving AI; Sayoko Narita of Automaton saw the song choice as remorseful. Narita observed that in the return stream Neuro-sama was less foul-mouthed but that her behavior still remained eccentric, which Narita possibly attributed to changes Vedal said he had made to Neuro-sama's filters and memory. Neuro-sama began making react content, watching a variety of viewer-submitted videos such as videos of people playing video games or of the AI-generated Seinfeld parody Nothing, Forever; Levi Winslow of Kotaku Australia was dismayed by the "AI-inception" of Neuro-sama and Nothing, Forever. On 4 February, she had nearly 140,000 followers on Twitch and approximately 42,000 subscribers on YouTube. In February, she also had her first collaboration with a human streamer, playing Minecraft with the VTuber Miyune, and the first developer stream occurred. On 22 March, Neuro-sama had her first karaoke stream. On 25 March, Evil Neuro was introduced. On 27 May, Neuro-sama debuted her first original model. On 30 May, Neuro-sama was announced to be participating in OffKai Expo 2023, held from 16–18 June. In June, she was averaging 5,700 viewers and in July she had over 300,000 Twitch followers; in a June interview with Bloomberg News, Vedal said that running Neuro-sama was his full-time job. By November, Neuro-sama had maintained her popularity and was averaging approximately 5,000 viewers; this was unlike most other types of AI-based entertainment which debuted at around the same time and garnered popularity before turning out to be "overhyped flops". On 16 December, Vedal won the Best Tech VTuber award at the 2023 VTuber Awards. On 19 December, Vedal began a subathon to coincide with Neuro-sama's first anniversary of streaming on Twitch (her "birthday"). The subathon ended on 4 January 2024. On 20 July 2024, Neuro-sama began streaming with Japanese subtitles on
Twproject
Twproject (say: T W Project) is a web-based project and groupware management tool created by Open Lab, an Italian software house founded in 2001. It won the 17th Jolt Productivity Award in 2007 in the project management category. In March 2019 it becomes property of Twproject company. It has widespread use in universities as a teaching tool in project management courses. It is used by Oracle Corporation, Prada, Calzedonia, General Electric and many other companies from corporations to small start-ups. == History == April 2001 - The idea of Teamwork came to Open-Lab founders from a need to overcome the PM tools used at that time. It was built in Microsoft ASP and Adobe Flash November 2002 - Open-Lab decide to move from Flash to HTML and from ASP to Java-JSP. Teamwork 2 development is started. June 2004 - Teamwork 2 released, using top open-source technologies like Hibernate, jBlooming, dynamic CSS, Ajax 7 January 2005 - Teamwork goes open source, under LGPL license; remains such until June 2006 (18 months): it is a hit application on SourceForge, with 38.000 downloads, covered by greeting but starving April 2005 - Open-Lab takes the decision to change commercial strategy to finance development of Teamwork version 3 6 June 2006 - Teamwork 3 is finally out (15 months development). New interface, many new features, agile support and much more 27 March 2007 - Teamwork wins the 2007 JOLT Productivity Awards for project management category July 2007 - Teamwork 4 development started: new interface, extended use of new HTML capabilities, JS-oriented interface, start using jQuery February 2009 - Teamwork 4.0 is out February 2010 - Teamwork 4.4: public project pages, Chinese interface. jQuery is getting more space in Teamwork December 2010 - Teamwork 4.6: released Mobile module available for iPhone, Android, BlackBerry. Intensive usage of jQuery June 2011 - Teamwork 4.7: released Issue Kanban / Organizer January 2012 - Teamwork 5.0 development started. Lighter interface, extensive usage of dynamic pages, easier installer and first time approach. Learning curve highly reduced. A jQuery Gantt editor included and released free for the community July 2012 - Teamwork 5 released and also the free online Gantt editor November 2012 - Teamwork 5.1 with new trees and improved model for staffing March 2013 - Teamwork 5.2 with stronger support for customizations and Japanese interface. April 2014 - Teamwork has changed its name in Twproject because the domain teamwork.com has been purchased by Teamwork. April 2013 - Twproject 5.4 with a redesigned more powerful Gantt chart. August 2015 - Twproject 5 finale release. September 2015 - Twproject 6 with a completely redesigned user interface. March 2019 - A new company Twproject srl has been spun off. September 2021 - Twproject 7 has been released introducing WBS based management and workload management. == Features == Project & task management (with Microsoft Project import/export), and JSON format Gantt editor. Uses jQuery Gantt components Time tracking. Several entry points: dashboard, weekly view, issues, start/stop buttons Resource planning with weekly/monthly view, work load overview, unavailability from agenda Issue tracking & planning(with Kanban), e-mail integration, task dedicated inboxes Dashboard configuration, with customizable portlets and layout Message boards Scrum module Meeting and minute management, attached documents Agenda (Integrates with iCal, Microsoft Outlook, Microsoft Entourage, and Google Calendar) Document management, remote file systems link with NTFS, FTP, SVN, S3 (Dropbox, Google drive) Mobile application for iPhone, iPad, Android, Blackberry, Windows phone == Integration == A complete JSON API is available for integrations. The applications runs in Java JDK 8+ on the Hibernate object/relational mapping. The standard distribution uses Apache Tomcat 9, but can run on any J2EE application server. Twproject is tested on these DB servers: MySQL, Oracle, SQL Server, PostgreSql, HSQLDB, but as uses Hibernate can run on many others. There is simple graphical step-by-step installer for Windows, Mac, Linux, .zip/.tar.gz/.rpm packages.
Gitter
Gitter is an open-source instant messaging and chat room system for developers and users of GitLab and GitHub repositories. Gitter is provided as software as a service, with a free option providing all basic features and the ability to create a single private chat room, and paid subscription options for individuals and organisations, which allows them to create arbitrary numbers of private chat rooms. Individual chat rooms can be created for individual Git repositories on GitHub. Chatroom privacy follows the privacy settings of the associated GitHub repository: thus, a chatroom for a private (i.e. members-only) GitHub repository is also private to those with access to the repository. A graphical badge linking to the chat room can then be placed in the git repository's README file, bringing it to the attention of all users and developers of the project. Users can chat in the chat rooms, or access private chat rooms for repositories they have access to, by logging into Gitter via GitHub. Gitter is similar to Slack. Like Slack, it automatically logs all messages in the cloud. In late 2020, New Vector Limited acquired Gitter from GitLab, and announced Gitter's features would eventually be moved to New Vector's flagship product, Element, thereby replacing Gitter entirely. On February 13, 2023, Gitter migrated their service to a custom-branded Matrix instance that uses Element for its web interface. == Features prior to Migration to Matrix == Gitter supports: Notifications, which are batched up on mobile devices to avoid annoyance Inline media files Viewing and subscribing to ("starring") multiple chat rooms in one web browser tab Linking to individual files in the linked git repository Linking to GitHub issues (by typing # and then the issue number) in the linked Git repository, with hovercards showing the details of the issue GitHub-flavored Markdown in chat messages Online status for users User hovercards, based on their GitHub profiles and statistics (number of GitHub followers, etc.) Browsable and searchable message archives, grouped by month Connection from IRC clients Gitter on iOS support authentication using GitHub or Twitter === Integrations with non-GitHub sites and applications === Gitter integrates with Trello, Jenkins, Travis CI, Drone (software), Heroku, and Bitbucket, among others. === Apps === Official Gitter apps for Windows, Mac, Linux, iOS and Android are available. === Account registration === Like other chat technologies, Gitter allows clients to instant message each other. It allows people to authenticate using a GitHub account and join a chatroom from a web browser, thus not requiring one to install any software, or create additional online accounts. == History == Gitter was created by some developers who were initially trying to create a generic web-based chat product, but then wrote extra code to hook their chat application up to GitHub to meet their own needs, and realised that they could turn the combined product into a viable specialist product in its own right. Gitter came out of beta in 2014. During the beta period, Gitter delivered 1.8 million chat messages. On March 15, 2017, GitLab announced the acquisition of Gitter. Included in the announcement was the stated intent that Gitter would continue as a standalone project. It was published as open source under an MIT License as of June 2017. On September 30, 2020, New Vector Limited acquired Gitter from GitLab, and announced upcoming support for the Matrix protocol in Gitter, which went live by the end of the year. Gitter's features would eventually be moved to New Vector's flagship product, Element, thereby replacing Gitter entirely. On February 13, 2023, Gitter migrated their service to a custom-branded Matrix instance that uses Element for its web interface. == Implementation prior to Migration to Matrix == The Gitter web application is implemented entirely in JavaScript, with the back end being implemented on Node.js. The source code to the web application was formerly proprietary (it was open-sourced in June 2017), although Gitter had made numerous auxiliary projects available as open-source software, such as an IRC bridge for IRC users who prefer using IRC client applications (and their extra features) to converse in the Gitter chat rooms.
Distributed manufacturing
Distributed manufacturing, also known as distributed production, cloud producing, distributed digital manufacturing, and local manufacturing, is a form of decentralized manufacturing practiced by enterprises using a network of geographically dispersed manufacturing facilities that are coordinated using information technology. It can also refer to local manufacture via the historic cottage industry model, or manufacturing that takes place in the homes of consumers. == Enterprise == In enterprise environments, the primary attribute of distributed manufacturing is the ability to create value at geographically dispersed locations. For example, shipping costs could be minimized when products are built geographically close to their intended markets. Also, products manufactured in a number of small facilities distributed over a wide area can be customized with details adapted to individual or regional tastes. Manufacturing components in different physical locations and then managing the supply chain to bring them together for final assembly of a product is also considered a form of distributed manufacturing. Digital networks combined with additive manufacturing allow companies a decentralized and geographically independent distributed production (cloud manufacturing). == Consumer == Within the maker movement and DIY culture, small scale production by consumers often using peer-to-peer resources is being referred to as distributed manufacturing. Consumers download digital designs from an open design repository website like Youmagine or Thingiverse and produce a product for low costs through a distributed network of 3D printing services such as 3D Hubs, Geomiq. In the most distributed form of distributed manufacturing the consumer becomes a prosumer and manufacturers products at home with an open-source 3-D printer such as the RepRap. In 2013 a desktop 3-D printer could be economically justified as a personal product fabricator and the number of free and open hardware designs were growing exponentially. Today there are millions of open hardware product designs at hundreds of repositories and there is some evidence consumers are 3-D printing to save money. For example, 2017 case studies probed the quality of: (1) six common complex toys; (2) Lego blocks; and (3) the customizability of open source board games and found that all filaments analyzed saved the prosumer over 75% of the cost of commercially available true alternative toys and over 90% for recyclebot filament. Overall, these results indicate a single 3D printing repository, MyMiniFactory, is saving consumers well over $60 million/year in offset purchases of only toys. These 3-D printers can now be used to make sophisticated high-value products like scientific instruments. Similarly, a study in 2022 found that 81% of open source designs provided economic savings and the total savings for the 3D printing community is more than $35 million from downloading only the top 100 products at YouMagine. In general, the savings are largest when compared to conventional products when prosumers use recycled materials in 'distributed recycling and additive manufacturing' (DRAM). == Emergency Distributed Manufacturing During COVID-19 Pandemic == Distributed manufacturing became far more visible during the COVID-19 pandemic because it offered a practical response to the breakdown of centralized global supply chains. As lock downs, border restrictions, and factory shutdowns disrupted conventional production, decentralized networks using local facilities such as Open Source Medical Supplies stepped in and manufactured over 48 million products. Additive manufacturing /3D printing were used to produce urgently needed items such as face shields, ventilators and their components, nasopharyngeal swabs, and other personal protective equipment. This demonstrated that distributed manufacturing could reduce lead times, improve responsiveness, and lessen dependence on distant suppliers during crisis conditions for a wide range of products. Peer-reviewed studies on pandemic-era manufacturing note that additive manufacturing was especially valuable because digital design files could be shared rapidly and produced close to the point of need, enabling hospitals, universities, small firms, and maker communities to supplement strained medical supply chains. The pandemic also helped shift distributed manufacturing from being seen as a niche or experimental model to a credible strategy for resilience, flexibility, and emergency response. At the same time, scholars caution that its wider adoption depends on solving issues related to quality assurance, regulation, material consistency, and coordination across distributed production sites. Overall, COVID-19 popularized distributed manufacturing by showing that localized, digitally enabled production could complement traditional manufacturing systems when speed, adaptability, and supply-chain resilience were critical. == Social change == Some call attention to the conjunction of commons-based peer production with distributed manufacturing techniques. The self-reinforced fantasy of a system of eternal growth can be overcome with the development of economies of scope, and here, the civil society can play an important role contributing to the raising of the whole productive structure to a higher plateau of more sustainable and customised productivity. Further, it is true that many issues, problems and threats rise due to the large democratization of the means of production, and especially regarding the physical ones. For instance, the recyclability of advanced nanomaterials is still questioned; weapons manufacturing could become easier; not to mention the implications on counterfeiting and on "intellectual property". It might be maintained that in contrast to the industrial paradigm whose competitive dynamics were about economies of scale, commons-based peer production and distributed manufacturing could develop economies of scope. While the advantages of scale rest on cheap global transportation, the economies of scope share infrastructure costs (intangible and tangible productive resources), taking advantage of the capabilities of the fabrication tools. And following Neil Gershenfeld in that "some of the least developed parts of the world need some of the most advanced technologies", commons-based peer production and distributed manufacturing may offer the necessary tools for thinking globally but act locally in response to certain problems and needs. As well as supporting individual personal manufacturing social and economic benefits are expected to result from the development of local production economies. In particular, the humanitarian and development sector are becoming increasingly interested in how distributed manufacturing can overcome the supply chain challenges of last mile distribution. Further, distributed manufacturing has been proposed as a key element in the Cosmopolitan localism or cosmolocalism framework to reconfigure production by prioritizing socio-ecological well-being over corporate profits, over-production and excess consumption. == Technology == By localizing manufacturing, distributed manufacturing may enable a balance between two opposite extreme qualities in technology development: Low technology and High tech. This balance is understood as an inclusive middle, a "mid-tech", that may go beyond the two polarities, incorporating them into a higher synthesis. Thus, in such an approach, low-tech and high-tech stop being mutually exclusive. They instead become a dialectic totality. Mid-tech may be abbreviated to "both…and…" instead of "neither…nor…". Mid-tech combines the efficiency and versatility of digital/automated technology with low-tech's potential for autonomy and resilience. == Contracting in Distributed Manufacturing == Research into contracting and order processing models tailored for distributed manufacturing has highlighted the need for flexible, role-based frameworks and advanced digital tools. These tools and frameworks are essential for addressing issues related to quality assurance, payment structures, legal compliance, and coordination among multiple actors. By addressing these challenges, contracting models for distributed manufacturing can unlock its potential for more localized, efficient, and sustainable production systems. A system prototype has been developed to simplify contracting for distributed manufacturing. This tool allows buyers to manage orders across multiple manufacturers using a single interface, automating workflows to ensure clarity and accountability for everyone involved. This research was led by the Internet of Production, as part of the mAkE project (African European Maker Innovation Ecosystem), funded by the European Horizon 2020 research and innovation programme.
Vinted
Vinted Group UAB is a Lithuanian technology company best known for its online marketplace Vinted. Vinted is the leading second-hand fashion marketplace in Europe and a go-to destination for all kinds of second-hand items. According to the company, its mission is to make second-hand the first choice worldwide. The company operates as an ecosystem of businesses, including the Vinted Marketplace (its peer-to-peer resale platform), Vinted Go (logistics and shipping services), Vinted Pay (in-app payment solutions), and Vinted Ventures (an investment arm supporting the circular economy). Headquartered in Vilnius, Lithuania, it also has offices in Germany and the Netherlands and employs more than 2,200 people. == History == Vinted was co-founded in 2008 by Milda Mitkute and Justas Janauskas in Vilnius, Lithuania. The idea originated when Mitkute was moving house and wanted a way to sell clothes she no longer needed. Janauskas helped her create a website where users could trade clothing items. In 2016, Dutch entrepreneur Thomas Plantenga joined Vinted as a strategy consultant and later became Chief Executive Officer, leading the company through a period of international growth. In 2019, Vinted became Lithuania’s first technology unicorn after raising €128 million at a €1 billion valuation in a funding round led by Lightspeed Venture Partners. In October 2020, it acquired United Wardrobe, a Dutch competitor, and in November 2020 German Kleiderkreisel and Mamikreisel were officially merged into the Vinted platform. In 2024 it acquired Trendsales, a Danish resale platform. According to Vogue Business, Vinted’s revenue grew 61% between 2022 and 2023 and the company posted a net profit of €17.8 million in 2023. Usage of Vinted in the UK has grown from 1.2 million users in 2021, to 8 million in 2023. In 2024, the group reported consolidated revenue of €813.4 million (up 36% from 2023) and a net profit of €76.7 million, up 330% from 2023. As of 2024, Vinted was valued at approximately €5 billion, operating in more than 26 markets worldwide and announcing plans to launch in Ireland, Greece, Latvia, Slovenia, and Estonia in 2025. As of 2025 the company employed more than 2,200 people. In April 2026, Vinted completed a secondary share transaction of €880m, valuing the company at €8bn. == Products and operations == Vinted primarily resells clothing but now supports multiple categories including homeware, kidswear, electronics, books, collectibles, and high-value fashion. Vinted has worked with public figures such as Paul Mescal and Alexa Chung on exclusive wardrobe sales and has also partnered directly with charities including Oxfam on initiatives which promote the social and environmental value of second-hand fashion, such as the Style for Change fashion show at London Fashion Week. In 2025, Vinted produced its first television format, the second-hand fashion competition series RE/Style, hosted by Emma Willis. The show features emerging fashion designers from across Europe creating runway-ready looks from second-hand garments and aired on Prime Video UK. In 2025, Vinted was reported as France’s top clothing retailer by sales volume. == Criticism == Vinted has faced scrutiny from European data protection authorities in France, Lithuania, and Poland following complaints regarding GDPR compliance and account blocking practices. In July 2024, the Lithuanian authority fined the company €2,375,276. The case was coordinated by a dedicated Vinted Working Group under the European Data Protection Board. In early 2024, Swedish police reported around 300 fraud cases linked to the platform, in which users’ bank accounts were targeted by scammers. In October 2024, Channel 4 in the United Kingdom aired a documentary examining safety and privacy concerns related to the platform, including the sexualisation of underage users’ images and risks associated with second-hand baby products lacking safety certification. In November 2025, BBC News reported that Vinted’s update to its sizing system in the United Kingdom led to widespread user criticism. Vinted said the update was intended to standardise sizing across international brands.
Digital transaction management
Digital transaction management (DTM) is a category of cloud services designed to digitally manage document-based transactions. DTM removes the friction inherent in transactions that involve people, documents, and data to create faster, easier, more convenient, and secure processes. DTM goes beyond content and document management to include e-signatures, authentication and non-repudiation; enabling co-browsing between the customer and the business; document transfer and certification; secure archiving that goes beyond records management; and a variety of meta-processes around managing electronic transactions and the documents associated with them. DTM standards are proposed and managed by the xDTM Standard Association Aragon Research has estimated that "by YE 2016, 70% of large enterprises will have a DTM initiative underway or fully implemented."