AI Analytics Healthcare

AI Analytics Healthcare — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Toolchain

A toolchain is a set of software development tools used to build and otherwise develop software. Often, the tools are executed sequentially and form a pipeline such that the output of one tool is the input for the next. Sometimes the term is used for a set of related tools that are not necessarily executed sequentially. A relatively common and simple toolchain consists of the tools to build for a particular operating system (OS) and CPU architecture: a compiler, a linker, and a debugger. With a cross-compiler, a toolchain can support cross-platform development. For building more complex software systems, many other tools may be in the toolchain. For example, for a video game, the toolchain may include tools for preparing sound effects, music, textures, 3-dimensional models and animations, and for combining these resources into the finished product.
Read more →
Zero-knowledge service

In cloud computing, the term zero-knowledge (or occasionally no-knowledge or zero-access) is a commonly used term for online services that store, transfer or manipulate data with a high level of confidentiality, where the data is only accessible to the data's owner (the client), and not to the service provider. However, unlike "end-to-end encryption", the term "zero-knowledge" does not imply any specific threat model or security notion, and its use is commonly frowned-upon by the security community. The term "zero-knowledge" was popularized by backup service SpiderOak, which later switched to using the term "no knowledge", acknowledging that the previous terminology was not technically accurate. == Disadvantages == Most cloud storage services keep a copy of the client's password on their servers, allowing clients who have lost their passwords to retrieve and decrypt their data using alternative means of authentication; but since zero-knowledge services do not store copies of clients' passwords, if a client loses their password then their data cannot be decrypted, making it practically unrecoverable. Most of the most used cloud storage services, such as Google Drive, Dropbox, OneDrive or iCloud, are also able to furnish access requests from law enforcement agencies for similar reasons; zero-knowledge services, however, are unable to do so, since their systems are designed to make clients' data inaccessible without the client's explicit cooperation.
Read more →
Data remanence

Data remanence is the residual representation of digital data that remains even after attempts have been made to remove or erase the data. This residue may result from data being left intact by a nominal file deletion operation, by reformatting of storage media that does not remove data previously written to the media, or through physical properties of the storage media that allow previously written data to be recovered. Data remanence may make inadvertent disclosure of sensitive information possible should the storage media be released into an uncontrolled environment (e.g., thrown in refuse containers or lost). Various techniques have been developed to counter data remanence. These techniques are classified as clearing, purging/sanitizing, or destruction. Specific methods include overwriting, degaussing, encryption, and media destruction. Effective application of countermeasures can be complicated by several factors, including media that are inaccessible, media that cannot effectively be erased, advanced storage systems that maintain histories of data throughout the data's life cycle, and persistence of data in memory that is typically considered volatile. Several standards exist for the secure removal of data and the elimination of data remanence. == Causes == Many operating systems, file managers, and other software provide a facility where a file is not immediately deleted when the user requests that action. Instead, the file is moved to a holding area (i.e. the "trash"), making it easy for the user to undo a mistake. Similarly, many software products automatically create backup copies of files that are being edited, to allow the user to restore the original version, or to recover from a possible crash (autosave feature). Even when an explicit deleted file retention facility is not provided or when the user does not use it, operating systems do not actually remove the contents of a file when it is deleted unless they are aware that explicit erasure commands are required, like on a solid-state drive. (In such cases, the operating system will issue the Serial ATA TRIM command or the SCSI UNMAP command to let the drive know to no longer maintain the deleted data.) Instead, they simply remove the file's entry from the file system directory because this requires less work and is therefore faster, and the contents of the file—the actual data—remain on the storage medium. The data will remain there until the operating system reuses the space for new data. In some systems, enough filesystem metadata are also left behind to enable easy undeletion by commonly available utility software. Even when undelete has become impossible, the data, until it has been overwritten, can be read by software that reads disk sectors directly. Computer forensics often employs such software. Likewise, reformatting, repartitioning, or reimaging a system is unlikely to write to every area of the disk, though all will cause the disk to appear empty or, in the case of reimaging, empty except for the files present in the image, to most software. Finally, even when the storage media is overwritten, physical properties of the media may permit recovery of the previous contents. In most cases however, this recovery is not possible by just reading from the storage device in the usual way, but requires using laboratory techniques such as disassembling the device and directly accessing/reading from its components. § Complications below gives further explanations for causes of data remanence. == Countermeasures == There are three levels commonly recognized for eliminating remnant data: === Clearing === Clearing is the removal of sensitive data from storage devices in such a way that there is assurance that the data may not be reconstructed using normal system functions or software file/data recovery utilities. The data may still be recoverable, but not without special laboratory techniques. Clearing is typically an administrative protection against accidental disclosure within an organization. For example, before a hard drive is re-used within an organization, its contents may be cleared to prevent their accidental disclosure to the next user. === Purging === Purging or sanitizing is the physical rewrite of sensitive data from a system or storage device done with the specific intent of rendering the data unrecoverable at a later time. Purging, proportional to the sensitivity of the data, is generally done before releasing media beyond control, such as before discarding old media, or moving media to a computer with different security requirements. === Destruction === The storage media is made unusable for conventional equipment. Effectiveness of destroying the media varies by medium and method. Depending on recording density of the media, and/or the destruction technique, this may leave data recoverable by laboratory methods. Conversely, destruction using appropriate techniques is the most secure method of preventing retrieval. == Specific methods == === Overwriting === A common method used to counter data remanence is to overwrite the storage media with new data. This is often called wiping or shredding a disk or file, by analogy to common methods of destroying print media, although the mechanism bears no similarity to these. Because such a method can often be implemented in software alone, and may be able to selectively target only part of the media, it is a popular, low-cost option for some applications. Overwriting is generally an acceptable method of clearing, as long as the media is writable and not damaged. The simplest overwrite technique writes the same data everywhere—often just a pattern of all zeros. At a minimum, this will prevent the data from being retrieved simply by reading from the media again using standard system functions. The UEFI in modern machines may offer an ATA class disk erase function as well. The ATA-6 standard governs secure erases specifications. Bitlocker is whole disk encryption and illegible without the key. Writing a fresh GPT allows a new file system to be established. Blocks will set empty but LBA read is illegible. New data will be unaffected and work fine. In an attempt to counter more advanced data recovery techniques, specific overwrite patterns and multiple passes have often been prescribed. These may be generic patterns intended to eradicate any trace signatures; an example is the seven-pass pattern 0xF6, 0x00, 0xFF, , 0x00, 0xFF, , sometimes erroneously attributed to US standard DOD 5220.22-M. One challenge with overwriting is that some areas of the disk may be inaccessible, due to media degradation or other errors. Software overwrite may also be problematic in high-security environments, which require stronger controls on data commingling than can be provided by the software in use. The use of advanced storage technologies may also make file-based overwrite ineffective (see the related discussion below under § Complications). There are specialized machines and software that are capable of doing overwriting. The software can sometimes be a standalone operating system specifically designed for data destruction. There are also machines specifically designed to wipe hard drives to the department of defense specifications DOD 5220.22-M. Writing zero to each block on hard disks and SSDs has the advantage of affording the firmware to deploy spare blocks when bad blocks are identified. Bitlocker has the advantage that data is illegible without the key. Seatools and other tools can erase disks with zero which is typical to revive old consumer class disks but they can wipe server disks albeit slowly. Modern 28TB and larger disks have an enormous number of LBA48 blocks. 40TB and 60TB disks will take proportionately longer times to wipe. ==== Feasibility of recovering overwritten data ==== Peter Gutmann investigated data recovery from nominally overwritten media in the mid-1990s. He suggested magnetic force microscopy may be able to recover such data, and developed specific patterns, for specific drive technologies, designed to counter such. These patterns have come to be known as the Gutmann method. Gutmann's belief in the possibility of data recovery is based on many questionable assumptions and factual errors that indicate a low level of understanding of how hard drives work. Daniel Feenberg, an economist at the private National Bureau of Economic Research, claims that the chances of overwritten data being recovered from a modern hard drive amount to "urban legend". He also points to the "18+1⁄2-minute gap" Rose Mary Woods created on a tape of Richard Nixon discussing the Watergate break-in. Erased information in the gap has not been recovered, and Feenberg claims doing so would be an easy task compared to recovery of a modern high density digital signal. As of November 2007, the United States Department of Defense considers overwriting acceptable for clearing magnetic media within the same security area/
Read more →
PDE surface

PDE surfaces are used in geometric modelling and computer graphics for creating smooth surfaces conforming to a given boundary configuration. PDE surfaces use partial differential equations to generate a surface which usually satisfy a mathematical boundary value problem. PDE surfaces were first introduced into the area of geometric modelling and computer graphics by two British mathematicians, Malcolm Bloor and Michael Wilson. == Technical details == The PDE method involves generating a surface for some boundary by means of solving an elliptic partial differential equation of the form ( ∂ 2 ∂ u 2 + a 2 ∂ 2 ∂ v 2 ) 2 X ( u , v ) = 0. {\displaystyle \left({\frac {\partial ^{2}}{\partial u^{2}}}+a^{2}{\frac {\partial ^{2}}{\partial v^{2}}}\right)^{2}X(u,v)=0.} Here X ( u , v ) {\displaystyle X(u,v)} is a function parameterised by the two parameters u {\displaystyle u} and v {\displaystyle v} such that X ( u , v ) = ( x ( u , v ) , y ( u , v ) , z ( u , v ) ) {\displaystyle X(u,v)=(x(u,v),y(u,v),z(u,v))} where x {\displaystyle x} , y {\displaystyle y} and z {\displaystyle z} are the usual cartesian coordinate space. The boundary conditions on the function X ( u , v ) {\displaystyle X(u,v)} and its normal derivatives ∂ X / ∂ n {\displaystyle \partial {X}/\partial {n}} are imposed at the edges of the surface patch. With the above formulation it is notable that the elliptic partial differential operator in the above PDE represents a smoothing process in which the value of the function at any point on the surface is, in some sense, a weighted average of the surrounding values. In this way, a surface is obtained as a smooth transition between the chosen set of boundary conditions. The parameter a {\displaystyle a} is a special design parameter which controls the relative smoothing of the surface in the u {\displaystyle u} and v {\displaystyle v} directions. When a = 1 {\displaystyle a=1} , the PDE is the biharmonic equation: X u u u u + 2 X u u v v + X v v v v = 0 {\displaystyle X_{uuuu}+2X_{uuvv}+X_{vvvv}=0} . The biharmonic equation is the equation produced by applying the Euler-Lagrange equation to the simplified thin plate energy functional X u u 2 + 2 X u v 2 + X v v 2 {\displaystyle X_{uu}^{2}+2X_{uv}^{2}+X_{vv}^{2}} . So solving the PDE with a = 1 {\displaystyle a=1} is equivalent to minimizing the thin plate energy functional subject to the same boundary conditions. == Applications == PDE surfaces can be used in many application areas. These include computer-aided design, interactive design, parametric design, computer animation, computer-aided physical analysis and design optimisation. == Related publications == M.I.G. Bloor and M.J. Wilson, Generating Blend Surfaces using Partial Differential Equations, Computer Aided Design, 21(3), 165–171, (1989). H. Ugail, M.I.G. Bloor, and M.J. Wilson, Techniques for Interactive Design Using the PDE Method, ACM Transactions on Graphics, 18(2), 195–212, (1999). J. Huband, W. Li and R. Smith, An Explicit Representation of Bloor-Wilson PDE Surface Model by using Canonical Basis for Hermite Interpolation, Mathematical Engineering in Industry, 7(4), 421-33 (1999). H. Du and H. Qin, Direct Manipulation and Interactive Sculpting of PDE surfaces, Computer Graphics Forum, 19(3), C261-C270, (2000). H. Ugail, Spine Based Shape Parameterisations for PDE surfaces, Computing, 72, 195–204, (2004). L. You, P. Comninos, J.J. Zhang, PDE Blending Surfaces with C2 Continuity, Computers and Graphics, 28(6), 895–906, (2004).
Read more →
Healthy Together

Healthy Together is a health technology company that provides software for Health & Humans Services Departments. Healthy Together supports a “One Door” approach to eligibility, enrollment, and management for programs like Medicaid, Supplemental Nutrition Assistance Program, TANF and WIC, as well as behavioral health (988), disease surveillance, vital records, child welfare and more. The platform's use is to increase the reach and efficacy of program initiatives, improve health equity and reduce cost. Software is available in the United States of America with current deployments in Florida, Oklahoma. The United States Department of Veterans Affairs also utilizes Healthy Together's mobile platform. == Development == Healthy Together launched in March 2020 and builds software for public health and health and human services departments. The Florida Department of Health began using the platform in September 2020 to deliver real-time test results to residents. Over 50% of households in Florida have adopted the mobile application. On December 6, 2022, the Advanced Technology Academic Research Center (ATARC) awarded Healthy Together and the State of Florida's Department of Health with a Digital Experience Award at their 2022 GITEC Emerging Technology Award Ceremony in Washington, D.C. to recognize success of the project. The partnership was also highlighted on the Federal News Network's show Federal Drive. The platform is also used at universities in Oklahoma. In November 2022, the United States Department of Veterans Affairs and Healthy Together announced a collaboration to expand access to health records for Veterans. The platform provides 18 million Veterans with access to their health information through their smartphones and mobile devices. In December 2022, the integration was recognized as one of Healthcare IT News' Top 10 stories of 2022.
Read more →
Digital Image Processing with Sound

DIPS (Digital Image Processing with Sound) is a set of plug-in objects that handle real-time digital image processing in Max/MSP programming environment. Combining with the built-in objects of the environment, DIPS enables to program the interaction between audio and visual events with ease, and supports the realization of interactive multimedia art as well as interactive computer music. == Summary of Features == A plug-in software for Max/MSP (Max 5 and 6) More than 300 Max external objects and abstractions More than 90 OpenGL objects included More than 110 visual effect objects (Dfx library, Core Image Filters) A utility library for the easy of programming (prefix Dlib) A comprehensive set of sample patches, and a detailed tutorial Handling images & movie files (QuickTime, OpenGL) Render and move 3D models (OpenGL) Video signal input (QuickTime, video texture) Video input analysis: motion detect, face tracking (OpenCV, OpenGL) Importing 3D models (.obj file) Importing Quartz Composer files OpenGL Shading Language (GLSL) programming interface Easy integration of visual events using DIPSWindowMixer (OpenGL) == Description == DIPS is a free plug-in software (a set of external objects) for Max/MSP. It supports the designing of the interaction between sound and visual events in Max using Apple’s Core Image, OpenGL and OpenCV technologies, and consequently, provides a powerful and user-friendly programming environment for the creation of interactive multimedia art. DIPS can be used to detect a performer’s motions and to track positions of subtle details, such as the face, mouth, and eyes. It can also be used to measure the distance between objects and a Kinect sensor system, and offers powerful tools for realtime image processing of incoming video stream and stored movie files. In addition, it can be used to create complex images in a virtual three-dimensional space. The DIPS consists of a library of more than 300 Max external objects and abstractions, a comprehensive set of sample patches, and a detailed tutorial. Some of its strong points, in comparison with other similar plug-ins and software, are its ease of programming, power, and efficiency. The sample patches and tutorial contained in the installation package allows composers and artists who are interested in the creation of interactive art to realize sophisticated realtime video effects on a live video signal at their first practice. And because of its ease of programming, it is likely that one will soon acquire skills needed to create state-of-the-art interactive performance works, multimedia installations, interactive multimedia artworks, and Max VJ applications using DIPS. == History == Initially developed by Shu Matsuda in 1997, DIPS was a plug-in software for Max/FTS running on SGI Octane and O2 computers. Since 2000, it has been developed by the DIPS Development Group supervised by Takayuki Rai. Current active group members are Shu Matsuda, Yota Morimoto, Takuto Fukuda, and Keitaro Takahashi. Previously, Chikashi Miyama, Daichi Ando and Takayuki Hamano also contributed to its development. 2013 DIPS5 for Max (Mac OS X) 2009 DIPS4 for Max/MSP (Mac OS X) 2006 DIPS3 for Max/MSP (Mac OS X) 2003 DIPS2 for jMax4 (Mac OS X) 2002 DIPS for jMax2 (Mac OS X & Linux) 2000 DIPS for jMax (Linux)
Read more →
Ware report

Security Controls for Computer Systems, commonly called the Ware report, is a 1970 text by Willis Ware that was foundational in the field of computer security. == Development == A defense contractor in St. Louis, Missouri, had bought an IBM mainframe computer, which it was using for classified work on a fighter aircraft. To provide additional income, the contractor asked the Department of Defense (DoD) for permission to sell computer time on the mainframe to local businesses via remote terminals, while the classified work continued. At the time, the DoD did not have a policy to cover this. The DoD's Advanced Research Projects Agency (DARPA) asked Ware - a RAND employee - to chair a committee to examine and report on the feasibility of security controls for computer systems. The committee's report was a classified document given in January 1970 to the Defense Science Board (DSB), which had taken over the project from ARPA. After declassification, the report was published by RAND in October 1979. == Influence == The IEEE Computer Society said the report was widely circulated, and the IEEE Annals of the History of Computing said that it, together with Ware's 1967 Spring Joint Computer Conference session, marked the start of the field of computer security. The report influenced security certification standards and processes, especially in the banking and defense industries, where the report was instrumental in creating the Orange Book.
Read more →
Joseph Stanislaus Ostoja-Kotkowski

Joseph Stanislaus Ostoja-Kotkowski AM, FRSA (also known as J. S. Ostoja-Kotkowski, Ostoja and Stan Ostoja-Kotkowski; 28 December 1922 – 2 April 1994) was best known for his ground-breaking work in chromasonics, laser kinetics and 'sound and image' productions. He earned recognition in Australia and overseas for his pioneering work in laser sound and image technology. His work included painting (instrumental in developing geometric art in Australia), photography, film-making, theatre design, fabric design, murals, kinetic and static sculpture, stained glass, vitreous enamel murals, op-collages, computer graphics, and laser art. Ostoja flourished between 1940 and 1994. Ostoja's films are still being exhibited. == Biography == Joseph Stanislaus Ostoja-Kotkowski was born in Golub, Poland, on 28 December 1922, descending from an old noble family that was part of the Clan of Ostoja. He studied drawing under Olgierd Vetesco in Przasnysz from 1940-1945. After winning a scholarship, he completed his studies at the Düsseldorf Academy of Fine Arts in Germany in 1949. In 1950 Ostoja migrated to Australia, arriving in Melbourne where he supported himself with work as a labourer. He enrolled at the Victorian School of Fine Arts National Gallery School under Alan Sumner and William Dargie 1950-1955 and there introduced the new abstract expression of Europe both to lecturers and students. He settled in the Adelaide Hills, South Australia, on the Booth estate at Stirling, living under the patronage of the Booth family for over 40 years (Freya Booth, the wife of Edward Stirling Booth, was a daughter of the artist Sir Hans Heysen). His first one-man exhibition was also in South Australia at the Royal Society of Arts, Adelaide. In 1956 Ostoja met and collaborated with Ian Davidson in the production of the short film Five South Australian Artists, and became involved in stage and theatre set design. He co-produced several experimental films again with Ian Davidson, including The Quest of Time in 1957 Ostoja's work in abstract expression began to receive accolades. He won the Cornell Prize for the canvas Form in Landscape. He started to design sets for theatre and dance including for Six Characters in Search of an Author by Luigi Pirandello (1957); the South Australian production of Samuel Beckett's Waiting for Godot (1958); Gaetano Donizetti's Elixir of Love, with novel light settings and modulations, for the Elder Conservatorium of the University of Adelaide which used his techniques for their Opera Workshops (1959); for The Egg; and for two performances of the South Australian Ballet Theatre with light/colour abstract presentations (1959). 1960 This year he designed sets for a new opera group which would eventually grow into the South Australian Opera Company. Among other theatrical events, he designed and executed the scenery for Moon on a Rainbow Shawl by Errol John, and The Teahouse of the August Moon by John Patrick, (a production by the University of Adelaide Theatre Guild). He received artistic satisfaction but little financial reward for these efforts. In this year also, he staged a visual production on the theme of Orpheus, using dance, music and voice with several projectors. This was the first attempt at quadraphonic sound in Australia, working in collaboration with Derek Jolly, who provided the sound and projection equipment. It was also the first demonstration of "Chromasonics" - the science of translating sound into visual images. Ostoja then designed innovative "abstracted" scenery for a production of The Marriage of Figaro and Benjamin Britten's The Turn of the Screw. 1961 Ostoja designed the sets for the controversial South Australian production of Patrick White's The Ham Funeral - also Alan Seymour's Swamp Creatures, both performed by the University of Adelaide Theatre Guild. He designed and constructed six stained glass windows for the Refectory at the University of Adelaide. In this period Ostoja designed special lights and gauzes for difficult effects required in an ambitious production of the opera Don Carlos by the Opera Workshop, for the Elder Conservatorium. 1962 Ostoja designed and built sets for the production of J.B, by Archibald MacLeish, for the second Adelaide Festival of Arts. He exhibited vitreous enamel works in Melbourne's Argus Gallery. Max Harris, in The Bulletin of 20 October 1962, praised Ostoja's sets for My Cousin from Fiji in Union Theatre, Adelaide, and his technique of rear screen projections as later adopted throughout Australia. 1963 Ostoja continued to develop Multi-Image projections, demonstrating for the first time in Australia the concept later to be known as 'audio-visuals!'. Ostoja gave Sir Herbert Read, the art critic, a personal viewing of one of his visual presentations. At Christmas, in the Elder Conservatorium, collaborating again with Derek Jolly, Ostoja gave what was probably the world's first "visual concert", using special projectors and incorporating music, colours and shapes. 1964 With fellow Adelaide artist John Dallwitz, Ostoja co-designed the first of several experimental dance and stage productions in the Adelaide Festival of Arts Sound and Image. The production featured Adelaide dancer Elizabeth_Cameron_Dalman. Also for the Adelaide Festival of Arts of that year, he designed the largest light mosaic ever staged up to that time, upon the facade of an 11-storey building. Ostoja was invited to New Zealand, and exhibited the first electronically generated images in Australia in Melbourne, at the Argus Gallery. His design for the 50-foot (15 m) bas-relief mural for the new B.P. building in Melbourne was the subject of a film which won the "Blue Ribbon" Award in the American Film Festival in New York. 1965 Ostoja designed and made the first light kinetic mural in Australia, and continued to evolve theatrical works using multi-screen and Multi-projector techniques. The Production of Jean Genet's The Balcony was very controversial. With Elizabeth Dalman, Ostoja produced new dance forms for Melbourne Television. He introduced Op Art to Australia, both at South Yarra Gallery in Melbourne, and Gallery A in Sydney. 1966 With John Dallwitz, Ostoja was invited by the Adelaide Festival of Arts to present more experimental theatre, Sound and image 1966. This highly acclaimed production incorporated Australian poetry into the sound, electronic music, and visual images and featured the dancer Antonio Rodrigues. The architect Robin Boyd commissioned Ostoja to design two large Op murals for the Australian Pavilion entrance at the Expo 67. Ostoja was awarded a Churchill Fellowship, which enabled him to have extensive world travel, comparing art and technology in many countries. He began to work with language, contemporary poetry and prose, and computers. 1967 John Dallwitz and Ostoja presented Sound and Image at the Festival of Perth. In Berne, Switzerland, Ostoja received the "Excellence F.I.A.P." Award for innovative photography. 1968 At the Adelaide Festival of Arts, Ostoja and John Dallwitz collaborated again to stage Sound and Image. This was the first theatre production in the world to use a laser beam. It also included the first science fiction play (The Veldt by Ray Bradbury) performed in Australia. Ostoja's theatre methods were increasingly attracting the attention of critics to how plays were staged. "Chromasonics", developed and introduced by Ostoja, was now being used extensively in the entertainment industry. 1969 Ostoja staged Krzysztof Penderecki's St. Luke Passion, a controversial, contemporary religious work. The South Australian The Advertiser wrote an extensive critique of Ostoja's work. Robin Boyd commissioned Ostoja to build a "Chromasonic" exhibit located in the Space Tube at the Australian Pavilion for Expo '70 in Osaka. 1970 Ostoja presented an Australian Aboriginal Dreamtime theme in his "Sound and Image" theatre, working with leading contemporary figures in poetry, music and dance. This was the first production of its kind in Australia, and appeared after the Festival in Melbourne, Sydney, Canberra and Perth. Ostoja's Space Scape mural, sixty feet long by ten feet high, won the Australia-wide competition for a mural for Adelaide Airport. His 120 feet (37 m) high 'light and sound' structure for the Adelaide Festival was the first of its kind in the world. 1971 Ostoja awarded a Creative Arts Fellowship at the Australian National University, Canberra. His 18-month stay resulted in the design and building of a "Chromasonics unit-laser", a 100 feet (30 m) Chromasonic tower, and a world premiere of a Synchronos concert. 1972 With Don Burrows and Don Banks, Ostoja presented Synchronos 72, where one could "hear the colours and see the sounds". Ostoja added Cymatics, developed during the Fellowship, to his workshop repertoire. He was invited to exhibit his photography in the National Gallery, Melbourne. 1973 Ostoja received a Fellowship from the Australian American Education Associatio
Read more →
Autonomic networking

Autonomic networking follows the concept of Autonomic Computing, an initiative started by IBM in 2001. Its ultimate aim is to create self-managing networks to overcome the rapidly growing complexity of the Internet and other networks and to enable their further growth, far beyond the size of today. == Increasing size and complexity == The ever-growing management complexity of the Internet caused by its rapid growth is seen by some experts as a major problem that limits its usability in the future. What's more, increasingly popular smartphones, PDAs, networked audio and video equipment, and game consoles need to be interconnected. Pervasive Computing not only adds features, but also burdens existing networking infrastructure with more and more tasks that sooner or later will not be manageable by human intervention alone. Another important aspect is the price of manually controlling huge numbers of vitally important devices of current network infrastructures. == Autonomic nervous system == The autonomic nervous system (ANS) is the part of complex biological nervous systems that is not consciously controlled. It regulates bodily functions and the activity of specific organs. As proposed by IBM, future communication systems might be designed in a similar way to the ANS. == Components of autonomic networking == As autonomics conceptually derives from biological entities such as the human autonomic nervous system, each of the areas can be metaphorically related to functional and structural aspects of a living being. In the human body, the autonomic system facilitates and regulates a variety of functions including respiration, blood pressure and circulation, and emotive response. The autonomic nervous system is the interconnecting fabric that supports feedback loops between internal states and various sources by which internal and external conditions are monitored. === Autognostics === Autognostics includes a range of self-discovery, awareness, and analysis capabilities that provide the autonomic system with a view on high-level state. In metaphor, this represents the perceptual sub-systems that gather, analyze, and report on internal and external states and conditions – for example, this might be viewed as the eyes, visual cortex and perceptual organs of the system. Autognostics, or literally "self-knowledge", provides the autonomic system with a basis for response and validation. A rich autognostic capability may include many different "perceptual senses". For example, the human body gathers information via the usual five senses, the so-called sixth sense of proprioception (sense of body position and orientation), and through emotive states that represent the gross wellness of the body. As conditions and states change, they are detected by the sensory monitors and provide the basis for adaptation of related systems. Implicit in such a system are imbedded models of both internal and external environments such that relative value can be assigned to any perceived state - perceived physical threat (e.g. a snake) can result in rapid shallow breathing related to fight-flight response, a phylogenetically effective model of interaction with recognizable threats. In the case of autonomic networking, the state of the network may be defined by inputs from: individual network elements such as switches and network interfaces including specification and configuration historical records and current state traffic flows end-hosts application performance data logical diagrams and design specifications Most of these sources represent relatively raw and unprocessed views that have limited relevance. Post-processing and various forms of analysis must be applied to generate meaningful measurements and assessments against which current state can be derived. The autognostic system interoperates with: configuration management - to control network elements and interfaces policy management - to define performance objectives and constraints autodefense - to identify attacks and accommodate the impact of defensive responses === Configuration management === Configuration management is responsible for the interaction with network elements and interfaces. It includes an accounting capability with historical perspective that provides for the tracking of configurations over time, with respect to various circumstances. In the biological metaphor, these are the hands and, to some degree, the memory of the autonomic system. On a network, remediation and provisioning are applied via configuration setting of specific devices. Implementation affecting access and selective performance with respect to role and relationship are also applied. Almost all the "actions" that are currently taken by human engineers fall under this area. With only a few exceptions, interfaces are set by hand, or by extension of the hand, through automated scripts. Implicit in the configuration process is the maintenance of a dynamic population of devices under management, a historical record of changes and the directives which invoked change. Typical to many accounting functions, configuration management should be capable of operating on devices and then rolling back changes to recover previous configurations. Where change may lead to unrecoverable states, the sub-system should be able to qualify the consequences of changes prior to issuing them. As directives for change must originate from other sub-systems, the shared language for such directives must be abstracted from the details of the devices involved. The configuration management sub-system must be able to translate unambiguously between directives and hard actions or to be able to signal the need for further detail on a directive. An inferential capacity may be appropriate to support sufficient flexibility (i.e. configuration never takes place because there is no unique one-to-one mapping between directive and configuration settings). Where standards are not sufficient, a learning capacity may also be required to acquire new knowledge of devices and their configuration. Configuration management interoperates with all of the other sub-systems including: autognostics - receives direction for and validation of changes policy management - implements policy models through mapping to underlying resources security - applies access and authorization constraints for particular policy targets autodefense - receives direction for changes === Policy management === Policy management includes policy specification, deployment, reasoning over policies, updating and maintaining policies, and enforcement. Policy-based management is required for: constraining different kinds of behavior including security, privacy, resource access, and collaboration configuration management describing business processes and defining performance defining role and relationship, and establishing trust and reputation It provides the models of environment and behavior that represent effective interaction according to specific goals. In the human nervous system metaphor, these models are implicit in the evolutionary "design" of biological entities and specific to the goals of survival and procreation. Definition of what constitutes a policy is necessary to consider what is involved in managing it. A relatively flexible and abstract framework of values, relationships, roles, interactions, resources, and other components of the network environment is required. This sub-system extends far beyond the physical network to the applications in use and the processes and end-users that employ the network to achieve specific goals. It must express the relative values of various resources, outcomes, and processes and include a basis for assessing states and conditions. Unless embodied in some system outside the autonomic network or implicit to the specific policy implementation, the framework must also accommodate the definition of process, objectives and goals. Business process definitions and descriptions are then an integral part of the policy implementation. Further, as policy management represents the ultimate basis for the operation of the autonomic system, it must be able to report on its operation with respect to the details of its implementation. The policy management sub-system interoperates (at least) indirectly with all other sub-systems but primarily interacts with: autognostics - providing the definition of performance and accepting reports on conditions configuration management - providing constraints on device configuration security - providing definitions of roles, access and permissions === Autodefense === Autodefense represents a dynamic and adaptive mechanism that responds to malicious and intentional attacks on the network infrastructure, or use of the network infrastructure to attack IT resources. As defensive measures tend to impede the operation of IT, it is optimally capable of balancing performance objectives with typically over-riding threat management actions. In the
Read more →
Physical access

Physical access is a term in computer security that refers to the ability of people to physically gain access to a computer system. According to Gregory White, "Given physical access to an office, the knowledgeable attacker will quickly be able to find the information needed to gain access to the organization's computer systems and network." == Attacks and countermeasures == === Attacks === Physical access opens up a variety of avenues for hacking. Michael Meyers notes that "the best network software security measures can be rendered useless if you fail to physically protect your systems," since an intruder could simply walk off with a server and crack the password at his leisure. Physical access also allows hardware keyloggers to be installed. An intruder may be able to boot from a CD or other external media and then read unencrypted data on the hard drive. They may also exploit a lack of access control in the boot loader; for instance, pressing F8 while certain versions of Microsoft Windows are booting, specifying 'init=/bin/sh' as a boot parameter to Linux (usually done by editing the command line in GRUB), etc. One could also use a rogue device to access a poorly secured wireless network; if the signal were sufficiently strong, one might not even need to breach the perimeter. === Countermeasures === IT security standards in the United States typically call for physical access to be limited by locked server rooms, sign-in sheets, etc. Physical access systems and IT security systems have historically been administered by separate departments of organizations, but are increasingly being seen as having interdependent functions needing a single, converged security policy. An IT department could, for instance, check security log entries for suspicious logons occurring after business hours, and then use keycard swipe records from a building access control system to narrow down the list of suspects to those who were in the building at that time. Surveillance cameras might also be used to deter or detect unauthorized access.
Read more →
Crackme

A crackme is a small computer program designed to test a programmer's reverse engineering skills. Crackmes are made as a legal way to crack software, since no intellectual property is being infringed. == Description == Crackmes often incorporate protection schemes and algorithms similar to those used in proprietary software. However, they can sometimes be more challenging because they may use advanced packing or protection techniques, making the underlying algorithm harder to analyze and modify. == Keygenme == A keygenme is specifically designed for the reverser to not only identify the protection algorithm used in the application but also create a small key generator (keygen) in the programming language of their choice. Most keygenmes, when properly manipulated, can be made self-keygenning. For example, during validation, they might generate the correct key internally and compare it to the user's input. This allows the key generation algorithm to be easily replicated. Anti-debugging and anti-disassembly routines are often used to confuse debuggers or render disassembly output useless. Code obfuscation is also used to further complicate reverse engineering.
Read more →
Per-pixel lighting

In computer graphics, per-pixel lighting refers to any technique for lighting an image or scene that calculates illumination for each pixel on a rendered image. This is in contrast to other popular methods of lighting such as vertex lighting, which calculates illumination at each vertex of a 3D model and then interpolates the resulting values over the model's faces to calculate the final per-pixel color values. Per-pixel lighting is commonly used with techniques, such as blending, alpha blending, alpha to coverage, anti-aliasing, texture filtering, clipping, hidden-surface determination, Z-buffering, stencil buffering, shading, mipmapping, normal mapping, bump mapping, displacement mapping, parallax mapping, shadow mapping, specular mapping, shadow volumes, high-dynamic-range rendering, ambient occlusion (screen space ambient occlusion, screen space directional occlusion, ray-traced ambient occlusion), ray tracing, global illumination, and tessellation. Each of these techniques provides some additional data about the surface being lit or the scene and light sources that contributes to the final look and feel of the surface. Most modern video game engines implement lighting using per-pixel techniques instead of vertex lighting to achieve increased detail and realism. The id Tech 4 engine, used to develop such games as Brink and Doom 3, was one of the first game engines to implement a completely per-pixel shading engine. All versions of the CryENGINE, Frostbite Engine, and Unreal Engine, among others, also implement per-pixel shading techniques. Deferred shading is a recent development in per-pixel lighting notable for its use in the Frostbite Engine and Battlefield 3. Deferred shading techniques are capable of rendering potentially large numbers of small lights inexpensively (other per-pixel lighting approaches require full-screen calculations for each light in a scene, regardless of size). == History == While only recently have personal computers and video hardware become powerful enough to perform full per-pixel shading in real-time applications such as games, many of the core concepts used in per-pixel lighting models have existed for decades. Frank Crow published a paper describing the theory of shadow volumes in 1977. This technique uses the stencil buffer to specify areas of the screen that correspond to surfaces that lie in a "shadow volume", or a shape representing a volume of space eclipsed from a light source by some object. These shadowed areas are typically shaded after the scene is rendered to buffers by storing shadowed areas with the stencil buffer. Jim Blinn first introduced the idea of normal mapping in a 1978 SIGGRAPH paper. Blinn pointed out that the earlier idea of unlit texture mapping proposed by Edwin Catmull was unrealistic for simulating rough surfaces. Instead of mapping a texture onto an object to simulate roughness, Blinn proposed a method of calculating the degree of lighting a point on a surface should receive based on an established "perturbation" of the normals across the surface. == Hardware rendering == Real-time applications, such as video games, usually implement per-pixel lighting through the use of pixel shaders, allowing the GPU hardware to process the effect. The scene to be rendered is first rasterized onto a number of buffers storing different types of data to be used in rendering the scene, such as depth, normal direction, and diffuse color. Then, the data is passed into a shader and used to compute the final appearance of the scene, pixel-by-pixel. Deferred shading is a per-pixel shading technique that has recently become feasible for games. With deferred shading, a "g-buffer" is used to store all terms needed to shade a final scene on the pixel level. The format of this data varies from application to application depending on the desired effect, and can include normal data, positional data, specular data, diffuse data, emissive maps and albedo, among others. Using multiple render targets, all of this data can be rendered to the g-buffer with a single pass, and a shader can calculate the final color of each pixel based on the data from the g-buffer in a final "deferred pass". Because deferred shading assumes only one visible fragment per pixel sample, transparent objects are generally handled in a separate forward pass. == Software rendering == Per-pixel lighting is also performed in software on many high-end commercial rendering applications which typically do not render at interactive framerates. This is called offline rendering or software rendering. NVidia's mental ray rendering software, which is integrated with such suites as Autodesk's Softimage is a well-known example.
Read more →
Confused deputy problem

In information security, a confused deputy is a computer program that is tricked by another program (with fewer privileges or less rights) into misusing its authority on the system. It is a specific type of privilege escalation. The confused deputy problem is often cited as an example of why capability-based security is important. Capability systems protect against the confused deputy problem, whereas access-control list–based systems do not. Such systems can mitigate the confused deputy problem by eliminating ambient authority, allowing programs to act only on resources for which they hold explicit capabilities, whereas access-control list–based systems are more susceptible to it. However, this protection depends on correct implementation; in formally verified capability systems such as seL4, it can be shown that the kernel enforces capability constraints correctly, preventing such behavior at the system level. == Example == In the original example of a confused deputy, there was a compiler program provided on a commercial timesharing service. Users could run the compiler and optionally specify a filename where it would write debugging output, and the compiler would be able to write to that file if the user had permission to write there. The compiler also collected statistics about language feature usage. Those statistics were stored in a file called "(SYSX)STAT", in the directory "SYSX". To make this possible, the compiler program was given permission to write to files in SYSX. But there were other files in SYSX: in particular, the system's billing information was stored in a file "(SYSX)BILL". A user ran the compiler and named "(SYSX)BILL" as the desired debugging output file. This produced a confused deputy problem. The compiler made a request to the operating system to open (SYSX)BILL. Even though the user did not have access to that file, the compiler did, so the open succeeded. The compiler wrote the compilation output to the file (here "(SYSX)BILL") as normal, overwriting it, and the billing information was destroyed. === The confused deputy === In this example, the compiler program is the deputy because it is acting at the request of the user. The program is seen as 'confused' because it was tricked into overwriting the system's billing file. Whenever a program tries to access a file, the operating system needs to know two things: which file the program is asking for, and whether the program has permission to access the file. In the example, the file is designated by its name, “(SYSX)BILL”. The program receives the file name from the user, but does not know whether the user had permission to write the file. When the program opens the file, the system uses the program's permission, not the user's. When the file name was passed from the user to the program, the permission did not go along with it; the permission was increased by the system silently and automatically. It is not essential to the attack that the billing file be designated by a name represented as a string. The essential points are that: the designator for the file does not carry the full authority needed to access the file; the program's own permission to access the file is used implicitly. == Other examples == A cross-site request forgery (CSRF) is an example of a confused deputy attack that uses the web browser to perform sensitive actions against a web application. A common form of this attack occurs when a web application uses a cookie to authenticate all requests transmitted by a browser. Using JavaScript, an attacker can force a browser into transmitting authenticated HTTP requests. The Samy computer worm used cross-site scripting (XSS) to turn the browser's authenticated MySpace session into a confused deputy. Using XSS the worm forced the browser into posting an executable copy of the worm as a MySpace message which was then viewed and executed by friends of the infected user. Clickjacking is an attack where the user acts as the confused deputy. In this attack a user thinks they are harmlessly browsing a website (an attacker-controlled website) but they are in fact tricked into performing sensitive actions on another website. An FTP bounce attack can allow an attacker to connect indirectly to TCP ports to which the attacker's machine has no access, using a remote FTP server as the confused deputy. Another example relates to personal firewall software. It can restrict Internet access for specific applications. Some applications circumvent this by starting a browser with instructions to access a specific URL. The browser has authority to open a network connection, even though the application does not. Firewall software can attempt to address this by prompting the user in cases where one program starts another which then accesses the network. However, the user frequently does not have sufficient information to determine whether such an access is legitimate—false positives are common, and there is a substantial risk that even sophisticated users will become habituated to clicking "OK" to these prompts. Not every program that misuses authority is a confused deputy. Sometimes misuse of authority is simply a result of a program error. The confused deputy problem occurs when the designation of an object is passed from one program to another, and the associated permission changes unintentionally, without any explicit action by either party. It is insidious because neither party did anything explicit to change the authority. Another example is when an administrator authorizes an AI agent to act on their behalf, and that AI subsequently delegates authority to another AI agent neither vetted nor authorized by the original administrator. The unvetted AI can then act without permissions or oversight from the original developer. == Solutions == In some systems it is possible to ask the operating system to open a file using the permissions of another client. This solution has some drawbacks: It requires explicit attention to security by the server. A naive or careless server might not take this extra step. It becomes more difficult to identify the correct permission if the server is in turn the client of another service and wants to pass along access to the file. It requires the client to trust the server to not abuse the borrowed permissions. Note that intersecting the server and client's permissions does not solve the problem either, because the server may then have to be given very wide permissions (all of the time, rather than those needed for a given request) in order to act for arbitrary clients. The simplest way to solve the confused deputy problem is to bundle together the designation of an object and the permission to access that object. This is exactly what a capability is. Using capability security in the compiler example, the client would pass to the server a capability to the output file, such as a file descriptor, rather than the name of the file. Since it lacks a capability to the billing file, it cannot designate that file for output. In the cross-site request forgery example, a URL supplied "cross"-site would include its own authority independent of that of the client of the web browser.
Read more →
Data remanence

Data remanence is the residual representation of digital data that remains even after attempts have been made to remove or erase the data. This residue may result from data being left intact by a nominal file deletion operation, by reformatting of storage media that does not remove data previously written to the media, or through physical properties of the storage media that allow previously written data to be recovered. Data remanence may make inadvertent disclosure of sensitive information possible should the storage media be released into an uncontrolled environment (e.g., thrown in refuse containers or lost). Various techniques have been developed to counter data remanence. These techniques are classified as clearing, purging/sanitizing, or destruction. Specific methods include overwriting, degaussing, encryption, and media destruction. Effective application of countermeasures can be complicated by several factors, including media that are inaccessible, media that cannot effectively be erased, advanced storage systems that maintain histories of data throughout the data's life cycle, and persistence of data in memory that is typically considered volatile. Several standards exist for the secure removal of data and the elimination of data remanence. == Causes == Many operating systems, file managers, and other software provide a facility where a file is not immediately deleted when the user requests that action. Instead, the file is moved to a holding area (i.e. the "trash"), making it easy for the user to undo a mistake. Similarly, many software products automatically create backup copies of files that are being edited, to allow the user to restore the original version, or to recover from a possible crash (autosave feature). Even when an explicit deleted file retention facility is not provided or when the user does not use it, operating systems do not actually remove the contents of a file when it is deleted unless they are aware that explicit erasure commands are required, like on a solid-state drive. (In such cases, the operating system will issue the Serial ATA TRIM command or the SCSI UNMAP command to let the drive know to no longer maintain the deleted data.) Instead, they simply remove the file's entry from the file system directory because this requires less work and is therefore faster, and the contents of the file—the actual data—remain on the storage medium. The data will remain there until the operating system reuses the space for new data. In some systems, enough filesystem metadata are also left behind to enable easy undeletion by commonly available utility software. Even when undelete has become impossible, the data, until it has been overwritten, can be read by software that reads disk sectors directly. Computer forensics often employs such software. Likewise, reformatting, repartitioning, or reimaging a system is unlikely to write to every area of the disk, though all will cause the disk to appear empty or, in the case of reimaging, empty except for the files present in the image, to most software. Finally, even when the storage media is overwritten, physical properties of the media may permit recovery of the previous contents. In most cases however, this recovery is not possible by just reading from the storage device in the usual way, but requires using laboratory techniques such as disassembling the device and directly accessing/reading from its components. § Complications below gives further explanations for causes of data remanence. == Countermeasures == There are three levels commonly recognized for eliminating remnant data: === Clearing === Clearing is the removal of sensitive data from storage devices in such a way that there is assurance that the data may not be reconstructed using normal system functions or software file/data recovery utilities. The data may still be recoverable, but not without special laboratory techniques. Clearing is typically an administrative protection against accidental disclosure within an organization. For example, before a hard drive is re-used within an organization, its contents may be cleared to prevent their accidental disclosure to the next user. === Purging === Purging or sanitizing is the physical rewrite of sensitive data from a system or storage device done with the specific intent of rendering the data unrecoverable at a later time. Purging, proportional to the sensitivity of the data, is generally done before releasing media beyond control, such as before discarding old media, or moving media to a computer with different security requirements. === Destruction === The storage media is made unusable for conventional equipment. Effectiveness of destroying the media varies by medium and method. Depending on recording density of the media, and/or the destruction technique, this may leave data recoverable by laboratory methods. Conversely, destruction using appropriate techniques is the most secure method of preventing retrieval. == Specific methods == === Overwriting === A common method used to counter data remanence is to overwrite the storage media with new data. This is often called wiping or shredding a disk or file, by analogy to common methods of destroying print media, although the mechanism bears no similarity to these. Because such a method can often be implemented in software alone, and may be able to selectively target only part of the media, it is a popular, low-cost option for some applications. Overwriting is generally an acceptable method of clearing, as long as the media is writable and not damaged. The simplest overwrite technique writes the same data everywhere—often just a pattern of all zeros. At a minimum, this will prevent the data from being retrieved simply by reading from the media again using standard system functions. The UEFI in modern machines may offer an ATA class disk erase function as well. The ATA-6 standard governs secure erases specifications. Bitlocker is whole disk encryption and illegible without the key. Writing a fresh GPT allows a new file system to be established. Blocks will set empty but LBA read is illegible. New data will be unaffected and work fine. In an attempt to counter more advanced data recovery techniques, specific overwrite patterns and multiple passes have often been prescribed. These may be generic patterns intended to eradicate any trace signatures; an example is the seven-pass pattern 0xF6, 0x00, 0xFF, , 0x00, 0xFF, , sometimes erroneously attributed to US standard DOD 5220.22-M. One challenge with overwriting is that some areas of the disk may be inaccessible, due to media degradation or other errors. Software overwrite may also be problematic in high-security environments, which require stronger controls on data commingling than can be provided by the software in use. The use of advanced storage technologies may also make file-based overwrite ineffective (see the related discussion below under § Complications). There are specialized machines and software that are capable of doing overwriting. The software can sometimes be a standalone operating system specifically designed for data destruction. There are also machines specifically designed to wipe hard drives to the department of defense specifications DOD 5220.22-M. Writing zero to each block on hard disks and SSDs has the advantage of affording the firmware to deploy spare blocks when bad blocks are identified. Bitlocker has the advantage that data is illegible without the key. Seatools and other tools can erase disks with zero which is typical to revive old consumer class disks but they can wipe server disks albeit slowly. Modern 28TB and larger disks have an enormous number of LBA48 blocks. 40TB and 60TB disks will take proportionately longer times to wipe. ==== Feasibility of recovering overwritten data ==== Peter Gutmann investigated data recovery from nominally overwritten media in the mid-1990s. He suggested magnetic force microscopy may be able to recover such data, and developed specific patterns, for specific drive technologies, designed to counter such. These patterns have come to be known as the Gutmann method. Gutmann's belief in the possibility of data recovery is based on many questionable assumptions and factual errors that indicate a low level of understanding of how hard drives work. Daniel Feenberg, an economist at the private National Bureau of Economic Research, claims that the chances of overwritten data being recovered from a modern hard drive amount to "urban legend". He also points to the "18+1⁄2-minute gap" Rose Mary Woods created on a tape of Richard Nixon discussing the Watergate break-in. Erased information in the gap has not been recovered, and Feenberg claims doing so would be an easy task compared to recovery of a modern high density digital signal. As of November 2007, the United States Department of Defense considers overwriting acceptable for clearing magnetic media within the same security area/
Read more →
North Atlantic Population Project

The North Atlantic Population Project (NAPP) is a collaboration of historical demographers in Britain, Canada, Denmark, Germany, Iceland, Norway, and Sweden to produce a massive census microdata collection for the North Atlantic Region in the late-nineteenth century. The database includes complete individual-level census enumerations for each country, and provides information on over 110 million people. This large scale allows detailed analysis of small geographic areas and population subgroups. The NAPP database is designed to be compatible with the Integrated Public Use Microdata Series (IPUMS), and is disseminated through the IPUMS data-access system at the Minnesota Population Center, University of Minnesota. Major collaborators on the project include Lisa Dillon, University of Montreal; Chad Gaffield, University of Ottawa; Ólöf Garðarsdóttir, Statistics Iceland; Marianne Jarnes Erikstad, University of Tromsø; Jan Oldervall University of Bergen; Evan Roberts, University of Minnesota; Steven Ruggles, University of Minnesota; Kevin Schürer, UK Data Archive; Gunnar Thorvaldsen, University of Tromsø; and Matthew Woollard, UK Data Archive. The project is also coordinated by the Minnesota Population Center at the University of Minnesota.
Read more →