AI And Analytics

AI And Analytics — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Superintelligence ban

  Superintelligence ban refers to proposed legal, ethical, or policy measures intended to restrict or prohibit the development of artificial superintelligence, AI systems that would surpass human cognitive abilities in nearly all domains. The idea arises from concerns that such systems could become uncontrollable, potentially posing existential threats to humanity or causing severe social and economic disruption. == Background == The concept of limiting or banning superintelligence research has roots in early 21st-century debates on artificial general intelligence (AGI) safety. Thinkers such as Nick Bostrom and Eliezer Yudkowsky warned that self-improving AI could rapidly exceed human oversight. As advanced models like large-scale language models and autonomous agents began demonstrating complex reasoning abilities, policymakers and ethicists increasingly discussed the need for legal constraints on the creation of systems capable of recursive self-improvement. In October 2025, the Future of Life Institute published a statement calling for "a prohibition on the development of superintelligence, not lifted before there is broad scientific consensus that it will be done safely and controllably, and strong public buy-in." This statement was signed by various public personalities, such as Richard Branson and Steve Wozniak, and AI experts, such as Yoshua Bengio and Geoffrey Hinton. == Rationale == Supporters of a superintelligence ban argue that once AI systems surpass human intelligence, traditional containment, alignment, and control methods may fail. They contend that even limited experimentation with such systems could lead to irreversible outcomes, including loss of human decision-making power or unintended global harm. Some propose international treaties modeled after the nuclear non-proliferation framework to prevent a competitive AI arms race. Opponents argue that a ban would be difficult to define and enforce, given the lack of a precise threshold distinguishing advanced AGI from superintelligence. They also warn that excessive restriction could slow scientific progress, hinder beneficial automation, and encourage unregulated underground research. == Global discussion == Although no government has enacted an explicit superintelligence ban, the idea has been debated within the European Union, United Nations, and several independent AI safety organizations. The Future of Life Institute, Center for AI Safety, and other organizations have called for international cooperation to manage risks associated with the pursuit of superintelligent systems. In 2024 and 2025, proposals for a temporary moratorium on frontier AI research were circulated among major technology firms and research institutes, reflecting growing public concern over the trajectory of AI capabilities.

  Read more →
• 

  Swap chain

  In computer graphics, a swap chain (also swapchain) is a series of virtual framebuffers used by the graphics card and graphics API for frame rate stabilization, stutter reduction, and several other purposes. Because of these benefits, many graphics APIs require the use of a swap chain. The swap chain usually exists in graphics memory, but it can exist in system memory as well. A swap chain with two buffers is a kind of double buffer. == Function == In every swap chain there are at least two buffers. The first framebuffer, the screenbuffer, is the buffer that is rendered to the output of the video card. The remaining buffers are known as backbuffers. Each time a new frame is displayed, the first backbuffer in the swap chain takes the place of the screenbuffer, this is called presentation or swapping. A variety of other actions may be taken on the previous screenbuffer and other backbuffers (if they exist). The screenbuffer may be simply overwritten or returned to the back of the swap chain for further processing. The action taken is decided by the client application and is API dependent. == Direct3D == Microsoft Direct3D implements a SwapChain class. Each host device has at least one swap chain assigned to it, and others may be created by the client application. The API provides three methods of swapping: copy, discard, and flip. When the SwapChain is set to flip, the screenbuffer is copied onto the last backbuffer, then all the existing backbuffers are copied forward in the chain. When copy is set, each backbuffer is copied forward, but the screenbuffer is not wrapped to the last buffer, leaving it unchanged. Flip does not work when there is only one backbuffer, as the screenbuffer is copied over the only backbuffer before it can be presented. In discard mode, the driver selects the best method. == Comparison with triple buffering == Outside the context of Direct3D, triple buffering refers to the technique of allowing an application to draw to whichever back buffer was least recently updated. This allows the application to always proceed with rendering, regardless of the pace at which frames are being drawn by the application or the pace at which frames are being sent to the display. Triple buffering may result in a frame being discarded without being displayed if two or more newer frames are completely rendered in the time it takes for one frame to be sent to the display. By contrast, Direct3D swap chains are a strict first-in, first-out queue, so every frame that is drawn by the application will be displayed even if newer frames are available. Direct3D does not implement a most-recent buffer swapping strategy, and Microsoft's documentation calls a Direct3D swap chain of three buffers "triple buffering". Triple buffering as described above is superior for interactive purposes such as gaming, but Direct3D swap chains of more than three buffers can be better for tasks such as presenting frames of a video where the time taken to decode each frame may be highly variable.

  Read more →
• 

  Colour banding

  Colour banding is a subtle form of posterisation in digital images, caused by the colour of each pixel being rounded to the nearest of the digital colour levels. While posterisation is often done for artistic effect, colour banding is an undesired artefact. In 24-bit colour modes, 8 bits per channel is usually considered sufficient to render images in Rec. 709 or sRGB. However the eye can see the difference between the colour levels, especially when there is a sharp border between two large areas of adjacent colour levels. This will happen with gradual gradients (like sunsets, dawns or clear blue skies), and also when blurring an image a large amount. Colour banding is more noticeable with fewer bits per pixel (BPP) at 16–256 colours (4–8 BPP), where there are fewer shades with a larger difference between them. The appearance of colour banding is exaggerated by the Mach bands effect. Possible solutions include the introduction of dithering and increasing the number of bits per colour channel. Because the banding comes from limitations in the presentation of the image, blurring the image does not fix this unless the image BPP is higher than the original.

  Read more →
• 

  Sprite (computer graphics)

  In computer graphics, a sprite is a two-dimensional bitmap that is integrated into a larger scene, most often in a 2D video game. Originally, the term sprite referred to fixed-sized objects composited together, by hardware, with a background. Use of the term has since become more general. Systems with hardware sprites include arcade video games of the 1970s and 1980s; game consoles including as the Atari VCS (1977), ColecoVision (1982), Famicom (1983), Genesis/Mega Drive (1988); and home computers such as the TI-99/4 (1979), Atari 8-bit computers (1979), Commodore 64 (1982), MSX (1983), Amiga (1985), and X68000 (1987). Hardware varies in the number of sprites supported, the size and colors of each sprite, and special effects such as scaling or reporting pixel-precise overlap. Hardware composition of sprites occurs as each scan line is prepared for the video output device, such as a cathode-ray tube, without involvement of the main CPU and without the need for a full-screen frame buffer. Sprites can be positioned or altered by setting attributes used during the hardware composition process. The number of sprites which can be displayed per scan line is often lower than the total number of sprites a system supports. For example, the Texas Instruments TMS9918 chip supports 32 sprites, but only four can appear on the same scan line. The CPUs in modern computers, video game consoles, and mobile devices are fast enough that bitmaps can be drawn into a frame buffer without special hardware assistance. Beyond that, GPUs can render vast numbers of scaled, rotated, anti-aliased, partially translucent, very high resolution images in parallel with the CPU. == Etymology == According to Karl Guttag, one of two engineers for the 1979 Texas Instruments TMS9918 video display processor, this use of the word sprite came from David Ackley, a manager at TI. It was also used by Danny Hillis at Texas Instruments in the late 1970s. The term was derived from the fact that sprites "float" on top of the background image without overwriting it, much like a ghost or mythological sprite. Some hardware manufacturers used different terms, especially before sprite became common: Player/Missile Graphics was a term used by Atari, Inc. for hardware sprites in the Atari 8-bit computers (1979) and Atari 5200 console (1982). The term reflects the use for both characters ("players") and smaller associated objects ("missiles") that share the same color. The earlier Atari Video Computer System and some Atari arcade games used player, missile, and ball. Stamp was used in some arcade hardware in the early 1980s, including Ms. Pac-Man. Movable Object Block, or MOB, was used in MOS Technology's graphics chip literature. Commodore, the main user of MOS chips and the owner of MOS for most of the chip maker's lifetime, instead used the term sprite for the Commodore 64. OBJs (short for objects) is used in the developer manuals for the NES, Super NES, and Game Boy. The region of video RAM used to store sprite attributes and coordinates is called OAM (Object Attribute Memory). This also applies to the Game Boy Advance and Nintendo DS. == History == === Arcade video games === The use of sprites originated with arcade video games. Nolan Bushnell came up with the original concept when he developed the first arcade video game, Computer Space (1971). Technical limitations made it difficult to adapt the early mainframe game Spacewar! (1962), which performed an entire screen refresh for every little movement, so he came up with a solution to the problem: controlling each individual game element with a dedicated transistor. The rockets were essentially hardwired bitmaps that moved around the screen independently of the background, an important innovation for producing screen images more efficiently and providing the basis for sprite graphics. The earliest video games to represent player characters as human player sprites were arcade sports video games, beginning with Taito's TV Basketball, released in April 1974 and licensed to Midway Manufacturing for release in North America. Designed by Tomohiro Nishikado, he wanted to move beyond simple Pong-style rectangles to character graphics, by rearranging the rectangle shapes into objects that look like basketball players and basketball hoops. Ramtek released another sports video game in October 1974, Baseball, which similarly displayed human-like characters. The Namco Galaxian arcade system board, for the 1979 arcade game Galaxian, displays animated, multi-colored sprites over a scrolling background. It became the basis for Nintendo's Radar Scope and Donkey Kong arcade hardware and home consoles such as the Nintendo Entertainment System. According to Steve Golson from General Computer Corporation, the term "stamp" was used instead of "sprite" at the time. === Home systems === Signetics devised the first chips capable of generating sprite graphics (referred to as objects by Signetics) for home systems. The Signetics 2636 video processors were first used in the 1978 1292 Advanced Programmable Video System and later in the 1979 Elektor TV Games Computer. The Atari VCS, released in 1977, has a hardware sprite implementation where five graphical objects can be moved independently of the game playfield. The term sprite was not in use at the time. The VCS's sprites are called movable objects in the programming manual, further identified as two players, two missiles, and one ball. These each consist of a single row of pixels that are displayed on a scan line. To produce a two-dimensional shape, the sprite's single-row bitmap is altered by software from one scan line to the next. The 1979 Atari 400 and 800 home computers have similar, but more elaborate, circuitry capable of moving eight single-color objects per scan line: four 8-bit wide players and four 2-bit wide missiles. Each is the full height of the display—a long, thin strip. DMA from a table in memory automatically sets the graphics pattern registers for each scan line. Hardware registers control the horizontal position of each player and missile. Vertical motion is achieved by moving the bitmap data within a player or missile's strip. The feature was called player/missile graphics by Atari. Texas Instruments developed the TMS9918 chip with sprite support for its 1979 TI-99/4 home computer. An updated version is used in the 1981 TI-99/4A. === In 2.5D and 3D games === Sprites remained popular with the rise of 2.5D games (those which recreate a 3D game space from a 2D map) in the late 1980s and early 1990s. A technique called billboarding allows 2.5D games to keep onscreen sprites rotated toward the player view at all times. Some 2.5D games, such as 1993's Doom, allow the same entity to be represented by different sprites depending on its rotation relative to the viewer, furthering the illusion of 3D. Fully 3D games usually present world objects as 3D models, but sprites are supported in some 3D game engines, such as GoldSrc and Unreal, and may be billboarded or locked to fixed orientations. Sprites remain useful for small details, particle effects, and other applications where the lack of a third dimension is not a major detriment. == Systems with hardware sprites == These are base hardware specs and do not include additional programming techniques, such as using raster interrupts to repurpose sprites mid-frame.

  Read more →
• 

  Database

  In computing, a database is an organized collection of data or a type of data store based on the use of a database management system (DBMS), the software that interacts with end users, applications, and the database itself to capture and analyze the data. The DBMS additionally encompasses the core facilities provided to administer the database. The sum total of the database, the DBMS and the associated applications can be referred to as a database system. Often the term "database" is also used loosely to refer to any of the DBMS, the database system or an application associated with the database. Before digital storage and retrieval of data became widespread, index cards were used for data storage in a wide range of applications and environments: in the home to record and store recipes, shopping lists, contact information and other organizational data; in business to record presentation notes, project research and notes, and contact information; in schools as flash cards or other visual aids; and in academic research to hold data such as bibliographical citations or notes in a card file. Professional book indexers used index cards in the creation of book indexes until they were replaced by indexing software in the 1980s and 1990s. Small databases can be stored on a file system, while large databases are hosted on computer clusters or cloud storage. The design of databases spans formal techniques and practical considerations, including data modeling, efficient data representation and storage, query languages, security and privacy of sensitive data, and distributed computing issues, including supporting concurrent access and fault tolerance. Computer scientists may classify database management systems according to the database models that they support. Relational databases became dominant in the 1980s. These model data as rows and columns in a series of tables, and the vast majority use SQL for writing and querying data. In the 2000s, non-relational databases became popular, collectively referred to as NoSQL, because they use different query languages. == Terminology and overview == Formally, a "database" refers to a set of related data accessed through the use of a "database management system" (DBMS), which is an integrated set of computer software that allows users to interact with one or more databases and provides access to all of the data contained in the database (although restrictions may exist that limit access to particular data). The DBMS provides various functions that allow entry, storage and retrieval of large quantities of information and provides ways to manage how that information is organized. Because of the close relationship between them, the term "database" is often used casually to refer to both a database and the DBMS used to manipulate it. Outside the world of professional information technology, the term database is often used to refer to any collection of related data (such as a spreadsheet or a card index) as size and usage requirements typically necessitate use of a database management system. Existing DBMSs provide various functions that allow management of a database and its data which can be classified into four main functional groups: Data definition – Creation, modification and removal of definitions that detail how the data is to be organized. Update – Insertion, modification, and deletion of the data itself. Retrieval – Selecting data according to specified criteria (e.g., a query, a position in a hierarchy, or a position in relation to other data) and providing that data either directly to the user, or making it available for further processing by the database itself or by other applications. The retrieved data may be made available in a more or less direct form without modification, as it is stored in the database, or in a new form obtained by altering it or combining it with existing data from the database. Administration – Registering and monitoring users, enforcing data security, monitoring performance, maintaining data integrity, dealing with concurrency control, and recovering information that has been corrupted by some event such as an unexpected system failure. Both a database and its DBMS conform to the principles of a particular database model. "Database system" refers collectively to the database model, database management system, and database. Physically, database servers are dedicated computers that hold the actual databases and run only the DBMS and related software. Database servers are usually multiprocessor computers, with generous memory and RAID disk arrays used for stable storage. Hardware database accelerators, connected to one or more servers via a high-speed channel, are also used in large-volume transaction processing environments. DBMSs are found at the heart of most database applications. DBMSs may be built around a custom multitasking kernel with built-in networking support, but modern DBMSs typically rely on a standard operating system to provide these functions. Since DBMSs comprise a significant market, computer and storage vendors often take into account DBMS requirements in their own development plans. Databases and DBMSs can be categorized according to the database model(s) that they support (such as relational or XML), the type(s) of computer they run on (from a server cluster to a mobile phone), the query language(s) used to access the database (such as SQL or XQuery), and their internal engineering, which affects performance, scalability, resilience, and security. == History == The sizes, capabilities, and performance of databases and their respective DBMSs have grown in orders of magnitude. These performance increases were enabled by the technology progress in the areas of processors, computer memory, computer storage, and computer networks. The concept of a database was made possible by the emergence of direct access storage media such as magnetic disks, which became widely available in the mid-1960s; earlier systems relied on sequential storage of data on magnetic tape. The subsequent development of database technology can be divided into three eras based on data model or structure: navigational, SQL/relational, and post-relational. The two main early navigational data models were the hierarchical model and the CODASYL model (network model). These were characterized by the use of pointers (often physical disk addresses) to follow relationships from one record to another. The relational model, first proposed in 1970 by Edgar F. Codd, departed from this tradition by insisting that applications should search for data by content, rather than by following links. The relational model employs sets of ledger-style tables, each used for a different type of entity. Only in the mid-1980s did computing hardware become powerful enough to allow the wide deployment of relational systems (DBMSs plus applications). By the early 1990s, however, relational systems dominated in all large-scale data processing applications, and as of 2018 they remain dominant: IBM Db2, Oracle, MySQL, and Microsoft SQL Server are the most searched DBMS. The dominant database language, standardized SQL for the relational model, has influenced database languages for other data models. Object databases were developed in the 1980s to overcome the inconvenience of object–relational impedance mismatch, which led to the coining of the term "post-relational" and also the development of hybrid object–relational databases. The next generation of post-relational databases in the late 2000s became known as NoSQL databases, introducing fast key–value stores and document-oriented databases. A competing "next generation" known as NewSQL databases attempted new implementations that retained the relational/SQL model while aiming to match the high performance of NoSQL compared to commercially available relational DBMSs. === 1960s, navigational DBMS === The introduction of the term database coincided with the availability of direct-access storage (disks and drums) from the mid-1960s onwards. The term represented a contrast with the tape-based systems of the past, allowing shared interactive use rather than daily batch processing. The Oxford English Dictionary cites a 1962 report by the System Development Corporation of California as the first to use the term "data-base" in a specific technical sense. As computers grew in speed and capability, a number of general-purpose database systems emerged; by the mid-1960s a number of such systems had come into commercial use. Interest in a standard began to grow, and Charles Bachman, author of one such product, the Integrated Data Store (IDS), founded the Database Task Group within CODASYL, the group responsible for the creation and standardization of COBOL. In 1971, the Database Task Group delivered their standard, which generally became known as the CODASYL approach, and soon a number of commercial products based on this approach entered the market. The CODASYL approach of

  Read more →
• 

  Trazzler

  Trazzler is a travel destination app that specializes in unique and local destinations. The initial concept was developed by Adam Rugel and Biz Stone in 2006 at Twitter's original offices under the name "71 miles". More than 10,000 writers and photographers have contributed and more than $350,000 in freelance contracts have been issued as a result of Trazzeler's weekly writing and photography contests. Investors in the company include SV Angel, AOL Founder Steve Case, and the Twitter founders, Evan Williams, Jack Dorsey, and Biz Stone. The company's partners are the City of Chicago, Hawaii Tourism Authority, Fairmont Hotels & Resorts, Salon.com, and Air New Zealand. Trazzler is designed for use on the iOS, Android, and Facebook.

  Read more →
• 

  Swizzling (computer graphics)

  In computer graphics, swizzles are a class of operations that transform vectors by rearranging components. Swizzles can also project from a vector of one dimensionality to a vector of another dimensionality, such as taking a three-dimensional vector and creating a two-dimensional or five-dimensional vector using components from the original vector. For example, if A = {1,2,3,4}, where the components are x, y, z, and w respectively, one could compute B = A.wwxy, whereupon B would equal {4,4,1,2}. Additionally, one could create a two-dimensional vector with A.wx or a five-dimensional vector with A.xyzwx. Combining vectors and swizzling can be employed in various ways. This is common in GPGPU applications. In terms of linear algebra, this is equivalent to multiplying by a matrix whose rows are standard basis vectors. If A = ( 1 , 2 , 3 , 4 ) T {\displaystyle A=(1,2,3,4)^{T}} , then swizzling A {\displaystyle A} as above looks like A . w w x y = [ 0 0 0 1 0 0 0 1 1 0 0 0 0 1 0 0 ] [ 1 2 3 4 ] = [ 4 4 1 2 ] . {\displaystyle A.\!wwxy={\begin{bmatrix}0&0&0&1\\0&0&0&1\\1&0&0&0\\0&1&0&0\end{bmatrix}}{\begin{bmatrix}1\\2\\3\\4\end{bmatrix}}={\begin{bmatrix}4\\4\\1\\2\end{bmatrix}}.}

  Read more →
• 

  Packed pixel

  In packed pixel or chunky framebuffer organization, the bits defining each pixel are clustered and stored consecutively. For example, if there are 16 bits per pixel, each pixel is represented in two consecutive (contiguous) 8-bit bytes in the framebuffer. If there are 4 bits per pixel, each framebuffer byte defines two pixels, one in each nibble. The latter example is as opposed to storing a single 4-bit pixel in a byte, leaving 4 bits of the byte unused. If a pixel has more than one channel, the channels are interleaved when using packed pixel organization. Packed pixel displays were common on early microcomputer system that shared a single main memory for both the central processing unit (CPU) and display driver. In such systems, memory was normally accessed a byte at a time, so by packing the pixels, the display system could read out several pixels worth of data in a single read operation. Packed pixel is one of two major ways to organize graphics data in memory, the other being planar organization, where each pixel is made of individual bits stored in their own plane. For a 4-bit color value, memory would be organized as four screen-sized planes of one bit each and a single pixel's value built up by selecting the appropriate bit from each plane. Planar organization has the advantage that the data can be accessed in parallel, and is used when memory bandwidth is an issue.

  Read more →
• 

  Cache language model

  A cache language model is a type of statistical language model. These occur in the natural language processing subfield of computer science and assign probabilities to given sequences of words by means of a probability distribution. Statistical language models are key components of speech recognition systems and of many machine translation systems: they tell such systems which possible output word sequences are probable and which are improbable. The particular characteristic of a cache language model is that it contains a cache component and assigns relatively high probabilities to words or word sequences that occur elsewhere in a given text. The primary, but by no means sole, use of cache language models is in speech recognition systems. To understand why it is a good idea for a statistical language model to contain a cache component one might consider someone who is dictating a letter about elephants to a speech recognition system. Standard (non-cache) N-gram language models will assign a very low probability to the word "elephant" because it is a very rare word in English. If the speech recognition system does not contain a cache component, the person dictating the letter may be annoyed: each time the word "elephant" is spoken another sequence of words with a higher probability according to the N-gram language model may be recognized (e.g., "tell a plan"). These erroneous sequences will have to be deleted manually and replaced in the text by "elephant" each time "elephant" is spoken. If the system has a cache language model, "elephant" will still probably be misrecognized the first time it is spoken and will have to be entered into the text manually; however, from this point on the system is aware that "elephant" is likely to occur again – the estimated probability of occurrence of "elephant" has been increased, making it more likely that if it is spoken it will be recognized correctly. Once "elephant" has occurred several times, the system is likely to recognize it correctly every time it is spoken until the letter has been completely dictated. This increase in the probability assigned to the occurrence of "elephant" is an example of a consequence of machine learning and more specifically of pattern recognition. There exist variants of the cache language model in which not only single words but also multi-word sequences that have occurred previously are assigned higher probabilities (e.g., if "San Francisco" occurred near the beginning of the text subsequent instances of it would be assigned a higher probability). The cache language model was first proposed in a paper published in 1990, after which the IBM speech-recognition group experimented with the concept. The group found that implementation of a form of cache language model yielded a 24% drop in word-error rates once the first few hundred words of a document had been dictated. A detailed survey of language modeling techniques concluded that the cache language model was one of the few new language modeling techniques that yielded improvements over the standard N-gram approach: "Our caching results show that caching is by far the most useful technique for perplexity reduction at small and medium training data sizes". The development of the cache language model has generated considerable interest among those concerned with computational linguistics in general and statistical natural language processing in particular: recently, there has been interest in applying the cache language model in the field of statistical machine translation. The success of the cache language model in improving word prediction rests on the human tendency to use words in a "bursty" fashion: when one is discussing a certain topic in a certain context, the frequency with which one uses certain words will be quite different from their frequencies when one is discussing other topics in other contexts. The traditional N-gram language models, which rely entirely on information from a very small number (four, three, or two) of words preceding the word to which a probability is to be assigned, do not adequately model this "burstiness". Recently, the cache language model concept – originally conceived for the N-gram statistical language model paradigm – has been adapted for use in the neural paradigm. For instance, recent work on continuous cache language models in the recurrent neural network (RNN) setting has applied the cache concept to much larger contexts than before, yielding significant reductions in perplexity. Another recent line of research involves incorporating a cache component in a feed-forward neural language model (FN-LM) to achieve rapid domain adaptation.

  Read more →
• 

  Parkerian Hexad

  The Parkerian Hexad is a set of six elements of information security proposed by Donn B. Parker in 1998. The Parkerian Hexad adds three additional attributes to the three classic security attributes of the CIA triad (confidentiality, integrity, availability). The Parkerian Hexad attributes are the following: Confidentiality Possession or Control Integrity Authenticity Availability Utility These attributes of information are atomic in that they are not broken down into further constituents; they are non-overlapping in that they refer to unique aspects of information. Any information security breach can be described as affecting one or more of these fundamental attributes of information. == Attributes from the CIA triad == === Confidentiality === Confidentiality refers to the "quality or state of being private or secret; known only to a limited few", or "the property that information is not made available or disclosed to unauthorized individuals, entities, or processes". For example: If an enterprise's strategic plans are leaked to competitors then this is a breach of confidentiality; If unauthorized persons gain access to an individual's financial records then that individual's confidentiality is breached. === Integrity === Integrity refers to being correct or consistent with the intended state of information. Any unauthorized modification of data, whether deliberate or accidental, is a breach of data integrity. For example: Data stored on disk are expected to be stable. If the data is changed at random by problems with a disk controller then this is a breach of integrity; Data generated by a medical device is transmitted and stored in the healthcare center but neither altered nor tampered with; Application programs are supposed to record information correctly. If the application introduces deviations from the intended values then this is a breach of integrity. "From Donn Parker: My definition of information integrity comes from the dictionaries. Integrity means that the information is whole, sound, and unimpaired (not necessarily correct). It means nothing is missing from the information it is complete and in intended good order". === Availability === Availability means having timely access to information. For example: A disk crash or denial-of-service attacks both cause a breach of availability. Any delay in response of a system that exceeds the expected service levels for that system can be described as a breach of availability. GPS jamming can lead to loss of Availability of the GPS system. == Parker's added attributes == === Authenticity === Authenticity is the "quality of being authentic or of established authority for truth and correctness". Parker defines it thus: "is the information genuine and accurate? Does it conform to reality and have validity?" and "authoritative, valid, true, real, genuine, or worthy of acceptance or belief by reason of conformity to fact and reality". === Possession or control === Possession or control refers to the loss of data by the authorized user (even if the ʺthiefʺ cannot access the data). From a control systems perspective, it is any loss of control (the ability to change settings and functions) or loss of view (the ability to monitor the system’s operation and its response to controls). Suppose a thief were to steal a sealed envelope containing a bank debit card and its personal identification number. Even if the thief did not open that envelope, it's reasonable for the victim to be concerned that the thief could do so at any time. That situation illustrates a loss of control or possession of information but does not involve the breach of confidentiality. === Utility === Utility refers to the data's usefulness. For example: Suppose someone encrypted data on disk to prevent unauthorized access or undetected modifications–and then lost the decryption key: that would be a breach of utility. The data would be confidential, controlled, integral, authentic, and available–they just wouldn't be useful in that form. The conversion of salary data from one currency into an inappropriate currency would be a breach of utility, as would the storage of data in a format inappropriate for a specific computer architecture; e.g., EBCDIC instead of ASCII or 9-track magnetic tape instead of DVD-ROM. A tabular representation of data substituted for a graph could be described as a breach of utility if the substitution made it more difficult to interpret the data. Utility is often confused with availability because breaches such as those described in these examples may also require time to work around the change in data format or presentation. However, the concept of usefulness is distinct from that of availability.

  Read more →
• 

  Control-flow integrity

  Control-flow integrity (CFI) is a general term for computer security techniques that prevent a wide variety of malware attacks from redirecting the flow of execution (the control flow) of a program. == Background == A computer program commonly changes its control flow to make decisions and use different parts of the code. Such transfers may be direct, in that the target address is written in the code itself, or indirect, in that the target address itself is a variable in memory or a CPU register. In a typical function call, the program performs a direct call, but returns to the caller function using the stack – an indirect backward-edge transfer. When a function pointer is called, such as from a virtual table, we say there is an indirect forward-edge transfer. Attackers seek to inject code into a program to make use of its privileges or to extract data from its memory space. Before executable code was commonly made read-only, an attacker could arbitrarily change the code as it is run, targeting direct transfers or even do with no transfers at all. After W^X became widespread, an attacker wants to instead redirect execution to a separate, unprotected area containing the code to be run, making use of indirect transfers: one could overwrite the virtual table for a forward-edge attack or change the call stack for a backward-edge attack (return-oriented programming). CFI is designed to protect indirect transfers from going to unintended locations. == Techniques == Associated techniques include code-pointer separation (CPS), code-pointer integrity (CPI), stack canaries, shadow stacks (SS), and vtable pointer verification. These protections can be classified into either coarse-grained or fine-grained based on the number of targets restricted. A coarse-grained forward-edge CFI implementation, could, for example, restrict the set of indirect call targets to any function that may be indirectly called in the program, while a fine-grained one would restrict each indirect call site to functions that have the same type as the function to be called. Similarly, for a backward edge scheme protecting returns, a coarse-grained implementation would only allow the procedure to return to a function of the same type (of which there could be many, especially for common prototypes), while a fine-grained one would enforce precise return matching (so it can return only to the function that called it). == Implementations == Related implementations are available in Clang (LLVM front-end),, GNU Compiler Collection, Microsoft's Control Flow Guard and Return Flow Guard, Google's Indirect Function-Call Checks and Reuse Attack Protector (RAP). === LLVM/Clang === The LLVM compiler's C/C++ front-end Clang provides a number of "CFI" schemes that works on the forward edge by checking for errors in virtual tables and type casts. Not all of the schemes are supported on all platforms and most of them, the exception being two "kcfi" schemes intended for low-level kernel software, depends on link-time optimization (LTO) to know what functions are supposed to be called in normal cases. Also provided is a separate "shadow call stack" (SCS) instrumentation pass that defends on the backward edge by checking for call stack modifications, available only for the aarch64 and RISC-V ISAs. And due to use of a shared processor register SCS is only enforceable on certain ABIs or if in other ways it is ensured that any other software using the register set (thread/processor) does not interfere with this use. Google has shipped Android with the Linux kernel compiled by Clang with link-time optimization (LTO) and CFI enabled since 2018. Even though SCS is available for the Linux kernel as an option, and support is also available for Android's system components it is recommended only to enable it for components for which it can be ensured that no third party code is loaded. === GCC === The GNU Compiler Collection implemented a "shadow call stack" compatible with Clang for aarch64 in v12 released in 2022. This feature is primarily intended for building the Linux kernel as support is missing from GCC user space libraries. === Intel Control-flow Enforcement Technology === Intel Control-flow Enforcement Technology (CET) detects compromises to control flow integrity with a shadow stack (SS) and indirect branch tracking (IBT). The kernel must map a region of memory for the shadow stack not writable to user space programs except by special instructions. The shadow stack stores a copy of the return address of each CALL. On a RET, the processor checks if the return address stored in the normal stack and shadow stack are equal. If the addresses are not equal, the processor generates an INT #21 (Control Flow Protection Fault). Indirect branch tracking detects indirect JMP or CALL instructions to unauthorized targets. It is implemented by adding a new internal state machine in the processor. The behavior of indirect JMP and CALL instructions is changed so that they switch the state machine from IDLE to WAIT_FOR_ENDBRANCH. In the WAIT_FOR_ENDBRANCH state, the next instruction to be executed is required to be the new ENDBRANCH instruction (ENDBR32 in 32-bit mode or ENDBR64 in 64-bit mode), which changes the internal state machine from WAIT_FOR_ENDBRANCH back to IDLE. Thus every authorized target of an indirect JMP or CALL must begin with ENDBRANCH. If the processor is in a WAIT_FOR_ENDBRANCH state (meaning, the previous instruction was an indirect JMP or CALL), and the next instruction is not an ENDBRANCH instruction, the processor generates an INT #21 (Control Flow Protection Fault). On processors not supporting CET indirect branch tracking, ENDBRANCH instructions are interpreted as NOPs and have no effect. === Microsoft Control Flow Guard === Control Flow Guard (CFG) was first released for Windows 8.1 Update 3 (KB3000850) in November 2014. Developers can add CFG to their programs by adding the /guard:cf linker flag before program linking in Visual Studio 2015 or newer. As of Windows 10 Creators Update (Windows 10 version 1703), the Windows kernel is compiled with CFG. The Windows kernel uses Hyper-V to prevent malicious kernel code from overwriting the CFG bitmap. CFG operates by creating a per-process bitmap, where a set bit indicates that the address is a valid destination. Before performing each indirect function call, the application checks if the destination address is in the bitmap. If the destination address is not in the bitmap, the program terminates. This makes it more difficult for an attacker to exploit a use-after-free by replacing an object's contents and then using an indirect function call to execute a payload. ==== Implementation details ==== For all protected indirect function calls, the _guard_check_icall function is called, which performs the following steps: Convert the target address to an offset and bit number in the bitmap. The highest 3 bytes are the byte offset in the bitmap The bit offset is a 5-bit value. The first four bits are the 4th through 8th low-order bits of the address. The 5th bit of the bit offset is set to 0 if the destination address is aligned with 0x10 (last four bits are 0), and 1 if it is not. Examine the target's address value in the bitmap If the target address is in the bitmap, return without an error. If the target address is not in the bitmap, terminate the program. ==== Bypass techniques ==== There are several generic techniques for bypassing CFG: Set the destination to code located in a non-CFG module loaded in the same process. Find an indirect call that was not protected by CFG (either CALL or JMP). Use a function call with a different number of arguments than the call is designed for, causing a stack misalignment, and code execution after the function returns (patched in Windows 10). Use a function call with the same number of arguments, but one of pointers passed is treated as an object and writes to a pointer-based offset, allowing overwriting a return address. Overwrite the function call used by the CFG to validate the address (patched in March 2015) Set the CFG bitmap to all 1's, allowing all indirect function calls Use a controlled-write primitive to overwrite an address on the stack (since the stack is not protected by CFG) === Microsoft eXtended Flow Guard === eXtended Flow Guard (XFG) has not been officially released yet, but is available in the Windows Insider preview and was publicly presented at Bluehat Shanghai in 2019. XFG extends CFG by validating function call signatures to ensure that indirect function calls are only to the subset of functions with the same signature. Function call signature validation is implemented by adding instructions to store the target function's hash in register r10 immediately prior to the indirect call and storing the calculated function hash in the memory immediately preceding the target address's code. When the indirect call is made, the XFG validation function compares the value in r10 to the target

  Read more →
• 

  Materialized view

  In computing, a materialized view is a database object that contains the results of a query. For example, it may be a local copy of data located remotely, or may be a subset of the rows and/or columns of a table or join result, or may be a summary using an aggregate function. The process of setting up a materialized view is sometimes called materialization. This is a form of caching the results of a query, similar to memoization of the value of a function in functional languages, and it is sometimes described as a form of precomputation. As with other forms of precomputation, database users typically use materialized views for performance reasons, i.e. as a form of optimization. Materialized views that store data based on remote tables were also known as snapshots (deprecated Oracle terminology). In any database management system following the relational model, a view is a virtual table representing the result of a database query. Whenever a query or an update addresses an ordinary view's virtual table, the DBMS converts these into queries or updates against the underlying base tables. A materialized view takes a different approach: the query result is cached as a concrete ("materialized") table (rather than a view as such) that may be updated from the original base tables from time to time. This enables much more efficient access, at the cost of extra storage and of some data being potentially out-of-date. Materialized views find use especially in data warehousing scenarios, where frequent queries of the actual base tables can be expensive. In a materialized view, indexes can be built on any column. In contrast, in a normal view, it's typically only possible to exploit indexes on columns that come directly from (or have a mapping to) indexed columns in the base tables; often this functionality is not offered at all. == Implementations == === Oracle === Materialized views were implemented first by the Oracle Database: the Query rewrite feature was added from version 8i. Example syntax to create a materialized view in Oracle: === PostgreSQL === In PostgreSQL, version 9.3 and newer natively support materialized views. In version 9.3, a materialized view is not auto-refreshed, and is populated only at time of creation (unless WITH NO DATA is used). It may be refreshed later manually using REFRESH MATERIALIZED VIEW. In version 9.4, the refresh may be concurrent with selects on the materialized view if CONCURRENTLY is used. Example syntax to create a materialized view in PostgreSQL: === SQL Server === Microsoft SQL Server differs from other RDBMS by the way of implementing materialized view via a concept known as "Indexed Views". The main difference is that such views do not require a refresh because they are in fact always synchronized to the original data of the tables that compound the view. To achieve this, it is necessary that the lines of origin and destination are "deterministic" in their mapping, which limits the types of possible queries to do this. This mechanism has been realised since the 2000 version of SQL Server. Example syntax to create a materialized view in SQL Server: === Stream processing frameworks === Apache Kafka (since v0.10.2), Apache Spark (since v2.0), Apache Flink, Kinetica DB, Materialize, RisingWave, and Epsio all support materialized views on streams of data. === Others === Materialized views are also supported in Sybase SQL Anywhere. In IBM Db2, they are called "materialized query tables". ClickHouse supports materialized views that automatically refresh on merges. MySQL doesn't support materialized views natively, but workarounds can be implemented by using triggers or stored procedures or by using the open-source application Flexviews. Materialized views can be implemented in Amazon DynamoDB using data modification events captured by DynamoDB Streams. Google announced in 8 April 2020 the availability of materialized views for BigQuery as a beta release.

  Read more →
• 

  Smart object

  A smart object is an object that enhances the interaction with not only people but also with other smart objects. Also known as smart connected products or smart connected things (SCoT), they are products, assets and other things embedded with processors, sensors, software and connectivity that allow data to be exchanged between the product and its environment, manufacturer, operator/user, and other products and systems. Connectivity also enables some capabilities of the product to exist outside the physical device, in what is known as the product cloud. The data collected from these products can be then analysed to inform decision-making, enable operational efficiencies and continuously improve the performance of the product. It can not only refer to interaction with physical world objects but also to interaction with virtual (computing environment) objects. A smart physical object may be created either as an artifact or manufactured product or by embedding electronic tags such as RFID tags or sensors into non-smart physical objects. Smart virtual objects are created as software objects that are intrinsic when creating and operating a virtual or cyber world simulation or game. The concept of a smart object has several origins and uses, see History. There are also several overlapping terms, see also smart device, tangible object or tangible user interface and Thing as in the Internet of things. == History == In the early 1990s, Mark Weiser, from whom the term ubiquitous computing originated, referred to a vision "When almost every object either contains a computer or can have a tab attached to it, obtaining information will be trivial", Although Weiser did not specifically refer to an object as being smart, his early work did imply that smart physical objects are smart in the sense that they act as digital information sources. Hiroshi Ishii and Brygg Ullmer refer to tangible objects in terms of tangibles bits or tangible user interfaces that enable users to "grasp & manipulate" bits in the center of users' attention by coupling the bits with everyday physical objects and architectural surfaces. The smart object concept was introduced by Marcelo Kallman and Daniel Thalmann as an object that can describe its own possible interactions. The main focus here is to model interactions of smart virtual objects with virtual humans, agents, in virtual worlds. The opposite approach to smart objects is 'plain' objects that do not provide this information. The additional information provided by this concept enables far more general interaction schemes, and can greatly simplify the planner of an artificial intelligence agent. In contrast to smart virtual objects used in virtual worlds, Lev Manovich focuses on physical space filled with electronic and visual information. Here, "smart objects" are described as "objects connected to the Net; objects that can sense their users and display smart behaviour". More recently in the early 2010s, smart objects are being proposed as a key enabler for the vision of the Internet of things. The combination of the Internet and emerging technologies such as near field communications, real-time localization, and embedded sensors enables everyday objects to be transformed into smart objects that can understand and react to their environment. Such objects are building blocks for the Internet of things and enable novel computing applications. In 2018, one of the world's first smart houses was built in Klaukkala, Finland in the form of a five-floor apartment block, using the Kone Residential Flow solution created by KONE, allowing even a smartphone to act as a home key. == Characteristics == Although we can view interaction with physical smart object in the physical world as distinct from interaction with virtual smart objects in a virtual simulated world, these can be related. Poslad considers the progression of: how humans use models of smart objects situated in the physical world to enhance human to physical world interaction; versus how smart physical objects situated in the physical world can model human interaction in order to lessen the need for human to physical world interaction; versus how virtual smart objects by modelling both physical world objects and modelling humans as objects and their subsequent interactions can form a predominantly smart virtual object environment. === Smart physical objects === The concept smart for a smart physical object simply means that it is active, digital, networked, can operate to some extent autonomously, is reconfigurable and has local control of the resources it needs such as energy, data storage, etc. Note, a smart object does not necessarily need to be intelligent as in exhibiting a strong essence of artificial intelligence—although it can be designed to also be intelligent. Physical world smart objects can be described in terms of three properties: Awareness: is a smart object's ability to understand (that is, sense, interpret, and react to) events and human activities occurring in the physical world. Representation: refers to a smart object's application and programming model—in particular, programming abstractions. Interaction: denotes the object's ability to converse with the user in terms of input, output, control, and feedback. Based upon these properties, these have been classified into three types: Activity-Aware Smart Objects: Are objects that can record information about work activities and its own use. Policy-Aware Smart Objects: Are objects that are activity-aware Objects can interpret events and activities with respect to predefined organizational policies. Process-Aware Smart Objects: Processes play a fundamental role in industrial work management and operation. A process is a collection of related activities or tasks that are ordered according to their position in time and space. === Smart virtual objects === For the virtual object in a virtual world case, an object is called smart when it has the ability to describe its possible interactions. This focuses on constructing a virtual world using only virtual objects that contain their own interaction information. There are four basic elements to constructing such a smart virtual object framework. Object properties: physical properties and a text description Interaction information: position of handles, buttons, grips, and the like Object behavior: different behaviors based on state variables Agent behaviors: description of the behavior an agent should follow when using the object Some versions of smart objects also include animation information in the object information, but this is not considered to be an efficient approach, since this can make objects inappropriately oversized. === Categorization === The terms smart, connected product or smart product can be confusing as it is used to cover a broad range of different products, ranging from smart home appliances (e.g., smart bathroom scales or smart light bulbs) to smart cars (e.g., Tesla). While these products share certain similarities, they often differ substantially in their capabilities. Raff et al. developed a conceptual framework that distinguishes different smart products based on their capabilities, which features 4 types of smart product archetypes (in ascending order of "smartness"). Digital Connected Responsive Intelligent == Advantages == Smart, connected products have three primary components: Physical – made up of the product's mechanical and electrical parts. Smart – made up of sensors, microprocessors, data storage, controls, software, and an embedded operating system with enhanced user interface. Connectivity – made up of ports, antennae, and protocols enabling wired/wireless connections that serve two purposes, it allows data to be exchanged with the product and enables some functions of the product to exist outside the physical device. Each component expands the capabilities of one another resulting in "a virtuous cycle of value improvement". First, the smart components of a product amplify the value and capabilities of the physical components. Then, connectivity amplifies the value and capabilities of the smart components. These improvements include: Monitoring of the product's conditions, its external environment, and its operations and usage. Control of various product functions to better respond to changes in its environment, as well as to personalize the user experience. Optimization of the product's overall operations based on actual performance data, and reduction of downtimes through predictive maintenance and remote service. Autonomous product operation, including learning from their environment, adapting to users' preferences and self-diagnosing and service. === The Internet of things (IoT) === The Internet of things is the network of physical objects that contain embedded technology to communicate and sense or interact with their internal states or the external environment. The phrase "Internet of things" reflects the gro

  Read more →
• 

  AI content watermarking

  AI content watermarking is the process of embedding imperceptible yet detectable signals into content generated by artificial intelligence systems, such as text, images, audio, or video. The technique allows the content to be traced and identified as machine-generated without compromising its quality for the end user. AI watermarking has emerged as a key approach to address growing concerns about misinformation, deepfakes, copyright infringement, and the traceability of synthetic content in the context of the rapid development of generative artificial intelligence. Unlike traditional visible watermarks used in photography, AI content watermarks are typically invisible to humans and can only be detected and deciphered algorithmically. The concept is distinct from the watermarking of AI models themselves (to prevent model theft) and from the watermarking of training data (to combat unauthorized data use). Modern AI watermarking schemes are typically formalized as a pair of algorithms, an embedding (or generation) algorithm and a detection algorithm, sharing a secret key, whose performance is evaluated along three competing axes: quality (the watermark must not noticeably degrade outputs), detectability (the watermark must be statistically distinguishable from unwatermarked content), and robustness (the watermark must persist under adversarial or incidental modifications). == Background == Digital watermarking has been used for decades to protect physical and digital media, from paper currency to photographs. Classical schemes typically embedded a fixed bit-string into a fixed cover signal, with robustness criteria defined against a small fixed set of distortions such as JPEG compression or additive Gaussian noise. The rapid advancement of generative AI in the early 2020s, however, created a new and qualitatively different demand: rather than protecting a single artifact, watermarks for AI content must be embedded automatically across an open-ended distribution of generated outputs while remaining robust to a much wider class of adversarial transformations, including paraphrasing, image regeneration via diffusion models, and re-recording. Large image generation models such as DALL-E, Stable Diffusion, and Midjourney, along with large language models like ChatGPT, made it possible to produce highly realistic synthetic text, images, audio, and video at scale, raising significant ethical and security concerns. In July 2023, the Biden administration secured voluntary commitments from leading AI companies, including OpenAI, Alphabet, Meta, and Amazon, to develop watermarking and other provenance technologies to help users identify AI-generated content. == Formal definitions and design goals == Most modern AI watermarking schemes can be formalized as a pair of algorithms ( W m , D e t e c t ) {\displaystyle ({\mathsf {Wm}},{\mathsf {Detect}})} parameterized by a secret key k {\displaystyle k} . The embedding algorithm W m {\displaystyle {\mathsf {Wm}}} takes a generative model M {\displaystyle M} (and optionally a prompt) and returns a watermarked output x {\displaystyle x} ; the detection algorithm D e t e c t ( x , k ) {\displaystyle {\mathsf {Detect}}(x,k)} outputs a real-valued score (typically a p-value or log-likelihood ratio) used to decide whether x {\displaystyle x} was produced by the watermarked generator. The literature evaluates such schemes along several largely conflicting criteria: Criteria for evaluation include imperceptibility or quality preservation, measured for text via perplexity and human preference judgments, and for images and audio via metrics such as PSNR, SSIM, LPIPS, or PESQ. Detectability is typically expressed as the true positive rate at a fixed false positive rate (e.g. 1% or 10^-6), or as the number of tokens or pixels needed to reach a given confidence level. Robustness refers to the requirement that the watermark should survive expected modifications like JPEG or MP3 compression, cropping, noise, paraphrasing, or machine translation. Distortion-freeness is a stronger property requiring that the marginal distribution of any single watermarked output be statistically identical to the unwatermarked model's distribution. Schemes due to Aaronson, Christ et al., and Kuditipudi et al. are distortion-free in this sense, while the original Kirchenbauer et al. scheme is not. Forgery resistance or unforgeability means an adversary without the secret key should be unable to produce content that passes detection. == Techniques == AI watermarking techniques vary significantly depending on the type of content being watermarked. At its core, the process involves two main stages: embedding (or encoding) the watermark, and detection. There are two primary methods for embedding: watermarking during content generation, which requires access to the AI model itself but is generally more robust, and post-generation watermarking, which can be applied to content from any source, including closed-source models. Watermarks can be broadly classified as visible, including overt marks such as logos or text overlays, or imperceptible, which are detectable only by algorithms. They can also be classified by durability: robust watermarks are designed to withstand common transformations such as compression, cropping, and re-encoding, while fragile watermarks are easily destroyed by any alteration, making them useful for tamper detection. A further axis distinguishes zero-bit watermarks, which only signal "this content was generated by model M," from multi-bit watermarks, which embed an arbitrary payload (such as a user identifier) that can be recovered at detection time. === Text === Text watermarking is considered one of the most challenging modalities because natural language offers relatively limited redundancy compared to images or audio. Modern approaches for large language models alter the autoregressive sampling process so that some statistical signature is left in the choice of tokens, while leaving the surface form of the text unchanged. The literature distinguishes three main families of generation-time text watermarks. Logit-biasing schemes (e.g. KGW) add a fixed bias δ {\displaystyle \delta } to a pseudorandomly selected subset of vocabulary logits before softmax sampling. Reweighting or sampling-based schemes (e.g. SynthID-Text) compose multiple pseudorandom tournaments over the model's full distribution. Distortion-free schemes based on the Gumbel-max trick or inverse transform sampling (Aaronson 2022; Kuditipudi et al. 2023; Christ et al. 2024) preserve the marginal output distribution of the model. ==== KGW: token-probability shifting ==== The pioneering "green list / red list" scheme of Kirchenbauer et al. (KGW), introduced at ICML 2023, is the foundation for most subsequent text watermarks. At each decoding step t {\displaystyle t} , a pseudorandom function (PRF) keyed by a secret k {\displaystyle k} is applied to a context window of h {\displaystyle h} previous tokens to deterministically partition the vocabulary V {\displaystyle V} of size N {\displaystyle N} into a "green list" G ⊂ V {\displaystyle G\subset V} of size γ N {\displaystyle \gamma N} and its complement, the "red list" R = V ∖ G {\displaystyle R=V\setminus G} , where γ ∈ ( 0 , 1 ) {\displaystyle \gamma \in (0,1)} (typically γ = 1 / 2 {\displaystyle \gamma =1/2} ) is the green fraction. A logits processor then increments every green-list logit by a fixed bias δ > 0 {\displaystyle \delta >0} before softmax: ℓ v ′ = ℓ v + δ ⋅ 1 [ v ∈ G ] {\displaystyle \ell '_{v}=\ell _{v}+\delta \cdot \mathbf {1} [v\in G]} so that, after sampling, green tokens are over-represented but generation is not constrained to green tokens alone; high-entropy positions tolerate the bias gracefully, while low-entropy positions (where one token dominates the logits) override the watermark and preserve correctness on factual content. Detection requires only the secret key and the candidate text, not the language model itself. The detector recomputes the partition g ( ⋅ ) {\displaystyle g(\cdot )} for each token, counts the number of green hits | G | hits {\displaystyle |G|_{\text{hits}}} in a sequence of length T {\displaystyle T} , and computes a one-proportion z-test statistic: z = | G | hits − γ T T γ ( 1 − γ ) {\displaystyle z={\frac {|G|_{\text{hits}}-\gamma T}{\sqrt {T\gamma (1-\gamma )}}}} Under the null hypothesis that the text was written by an unwatermarked source (human or another model), the green-hit count is approximately binomially distributed with mean γ T {\displaystyle \gamma T} ; a large positive z {\displaystyle z} rejects the null hypothesis. The original paper reports that fewer than 25 watermarked tokens are sufficient to detect a watermark with a false positive rate below 10^-5 on the OPT-1.3B model. A follow-up study by the same group documented robustness under temperature sampling, top-p (nucleus) sampling, and human paraphrasing, and proposed sliding-window

  Read more →
• 

  Connection string

  In computing, a connection string is a string that specifies information about a data source and the means of connecting to it. It is passed in code to an underlying driver or provider in order to initiate the connection. Whilst commonly used for a database connection, the data source could also be a spreadsheet or text file. The connection string may include attributes such as the name of the driver, server and database, as well as security information such as user name and password. == Examples == This example shows a PostgreSQL connection string for connecting to wikipedia.com with SSL and a connection timeout of 180 seconds: DRIVER={PostgreSQL Unicode};SERVER=www.wikipedia.com;SSL=true;SSLMode=require;DATABASE=wiki;UID=wikiuser;Connect Timeout=180;PWD=ashiknoor Users of Oracle databases can specify connection strings: on the command line (as in: sqlplus scott/tiger@connection_string ) via environment variables ($TWO_TASK in Unix-like environments; %TWO_TASK% in Microsoft Windows environments) in local configuration files (such as the default $ORACLE_HOME/network/admin.tnsnames.ora) in LDAP-capable directory services

  Read more →