AI App Apple Watch — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.
System appreciation is an activity often included in the maintenance phase of software engineering projects. Key deliverables from this phase include documentation that describes what the system does in terms of its functional features, and how it achieves those features in terms of its architecture and design. Software architecture recovery is often the first step within System appreciation.
Read more →
This is a list of assembly software and tools, including software used for assembly language programming, machine code generation, disassembly, debugging, binary analysis, reverse engineering, and instruction-set simulation. == Assemblers and machine-code generators == == Disassemblers and binary-analysis tools == == Debuggers with assembly-level features == == Educational IDEs, simulators and emulators == == Portable and intermediate assembly-like languages == == Assembly language families == Assembly language is not a single programming language, but a family of low-level languages associated with particular instruction set architectures and processor families. Examples include:
Read more →
Zhura ( ZUR-ə) is a free, web-based screenwriting software application for writing and formatting screenplays to the film industry standard, as well as other formats. Zhura allows users to collaborate on scripts in public or private groups and uses Creative Commons Licensing for all work in the public workspace. On March 29, 2010, Zhura announced its merger with Scripped. Scripped's CEO, Sunil Rajaraman, remains the company's Chief Executive Officer (CEO) as of 2022. The Zhura CEO was Eric MacDonald, a former Cascade Communications engineer. Scripped later closed on April 1, 2015 after a catastrophic, irrecoverable data loss. == Script editor == Screenplay Template – The script editor provides a built-in screenplay template which formats the document to a standard for scripts as recommended by the AMPAS. The screenplay document is composed of seven elements: scene, action, character, dialogue, parenthetical, transition, and shot (see image). Each element has a specific style to which the script editor conforms as you type.Script Formats – Other major script formats for stage play, sitcom, audio drama and comic book are also supported as well as the ability to switch between them.Auto-Complete – Characters, scene headings and custom transitions are “remembered” as they are written and “recalled” with tab-completion when a writer starts a new character, scene heading or transition, respectively.Multiple Editors – With a collaborative editing model comparable to Google Docs, two or more users can edit the same script simultaneously, regardless of having a different operating system or web browser. Import/Export – A screenplay written in another program can be imported into the script editor and automatically conformed to the screenplay template. The closer the original script has adhered to the standard format, the better it will appear when imported. Supported import/export formats include Text (.txt) Word (.doc) Rich Text (.rtf) and OpenDocument (.odt). Scripts can also be exported as a PDF file with additional options.Tracking Changes – Similar to the “tracking” feature in Microsoft Word, a user can review all changes made to a script in the revision history as well as highlight the contributions of each writer. Offline Mode – The Google Gears-based offline functionality is in the process of being updated and is not available for new subscribers, according to the company founders. == Community == Scripped supports typical social networking features such as discussion boards, comments, user profiles, public and private writing groups, internal web mail and instant messaging within the script editor. There is also the option to share scripts with others outside of Scripped by making scripts externally viewable. Scripped is made up entirely of user-generated scripts that other users can share, critique and edit, offering creative support to a community of writers. == Licensing of user-created work == There are three types of work-spaces on Scripped (personal, group and public) with unique copyright and licensing management for the work created in each area. Any work a user originates may be moved from the personal area to a public or group area at any time. Once another user edits a script, however, it cannot be moved into the originator’s personal area. Personal Workspace – Any script created or video uploaded in the user’s personal workspace remains copyrighted to that user. Until the user moves that script or video from their personal area into a group or public area, no other user shares a copyright or license to that work. Private Group Workspace – The copyright to any script created or video uploaded in a private group workspace is allocated by the individual members of the group, however they see fit. Public Workspace – Any script created or video uploaded in the public workspace is assigned a Creative Commons license by the originator of that work. The originator of a script may select one of four Creative Commons licenses before introducing that script to the public. The selection of the license is determined by what the author wants to allow others to do with the work. Below is a list of Creative Commons licenses available for all scripts and videos in the public workspace. Share Alike (BY-SA) This license lets others remix, tweak, and build upon your work even for commercial reasons, as long as they credit the original user and license their new creations under the identical terms. This license is often compared to open source software licenses. All new works based on the original user's will carry the same license, so any derivatives will also allow commercial use. No Derivatives (BY-ND) This license allows for redistribution, commercial and non-commercial, as long as it is passed along unchanged and in whole, with credit to the original user. Non-Commercial, No Derivatives (BY-NC-ND) This license is the most restrictive of the four licenses, allowing redistribution. This license is often called the "free advertising" license because it allows others to download the original user work and share them with others as long as they mention the original user and link back to them, but they can't change them in any way or use them commercially. Non-Commercial, Share Alike (BY-NC-SA) This license lets others remix, tweak, and build upon the original user's work non-commercially, as long as they credit the original user and license their new creations under the identical terms. Others can download and redistribute the original user's work just like the BY-NC-ND license, but they can also translate, make remixes, and produce new stories based on the original user's work. All new work based on the original user's work will carry the same license, so any derivatives will also be non-commercial in nature. == Events == In April 2008, Zhura partnered with Improv Asylum, a comedy troupe in Boston, Massachusetts to produce a live sketch comedy show called "You Wrote It, Live" entirely written by the public on Zhura. Another show was produced in June.
Read more →
TAChart is a component for the Lazarus IDE that provides charting services. Similar to Tchart and Teechart for Delphi it supports a collection of different chart types including bar charts, pie charts, line charts and point series. Apart from a screen canvas, output is possible in form of SVG, OpenGL, printer, WMF, and other formats. TAChart is bundled with the Lazarus Component Library. Although not intended to be a TChart clone, why its usage differs in certain points, its basic functionality is very similar and some source code written for TeeChart may be reused. == History == The first version of TAChart was developed by Philippe Martinole for the TeleAuto project, a program for automation of astronomic observations. Later functionality was introduced by Luis Rodrigues while porting the Epanet application from Delphi to Lazarus. In the ensuing years the code has extensively rewritten, expanded and is now maintained by Alexander Klenin. == Data sources == TAChart is able to use input from various sources. Examples include lists of real values, user defined buffers in the computer's memory, vectors of random values, fields in databases, calculated values provided by pre-defined functions and results of embedded code written in Pascal Script
Read more →
Incremental heuristic search algorithms combine both incremental and heuristic search to speed up searches of sequences of similar search problems, which is important in domains that are only incompletely known or change dynamically. Incremental search has been studied at least since the late 1960s. Incremental search algorithms reuse information from previous searches to speed up the current search and solve search problems potentially much faster than solving them repeatedly from scratch. Similarly, heuristic search has also been studied at least since the late 1960s. Heuristic search algorithms, often based on A, use heuristic knowledge in the form of approximations of the goal distances to focus the search and solve search problems potentially much faster than uninformed search algorithms. The resulting search problems, sometimes called dynamic path planning problems, are graph search problems where paths have to be found repeatedly because the topology of the graph, its edge costs, the start vertex or the goal vertices change over time. So far, three main classes of incremental heuristic search algorithms have been developed: The first class restarts A at the point where its current search deviates from the previous one (example: Fringe Saving A). The second class updates the h-values (heuristic, i.e. approximate distance to goal) from the previous search during the current search to make them more informed (example: Generalized Adaptive A). The third class updates the g-values (distance from start) from the previous search during the current search to correct them when necessary, which can be interpreted as transforming the A search tree from the previous search into the A search tree for the current search (examples: Lifelong Planning A, D, D Lite). All three classes of incremental heuristic search algorithms are different from other replanning algorithms, such as planning by analogy, in that their plan quality does not deteriorate with the number of replanning episodes. == Applications == Incremental heuristic search has been extensively used in robotics, where a larger number of path planning systems are based on either D (typically earlier systems) or D Lite (current systems), two different incremental heuristic search algorithms.
Read more →
In digital image and video processing, a color layout descriptor (CLD) is designed to capture the spatial distribution of color in an image. The feature extraction process consists of two parts: grid based representative color selection and discrete cosine transform with quantization. Color is the most basic quality of the visual contents, therefore it is possible to use colors to describe and represent an image. The MPEG-7 standard has tested the most efficient procedure to describe the color and has selected those that have provided more satisfactory results. This standard proposes different methods to obtain these descriptors, and one tool defined to describe the color is the CLD, that permits describing the color relation between sequences or group of images. The CLD captures the spatial layout of the representative colors on a grid superimposed on a region or image. Representation is based on coefficients of the discrete cosine transform (DCT). This is a very compact descriptor being highly efficient in fast browsing and search applications. It can be applied to still images as well as to video segments. == Definition == The CLD is a very compact and resolution-invariant representation of color for high-speed image retrieval and it has been designed to efficiently represent the spatial distribution of colors. This feature can be used for a wide variety of similarity-based retrieval, content filtering and visualization. It is especially useful for spatial structure-based retrieval applications. This descriptor is obtained by applying the DCT transformation on a 2-D array of local representative colors in Y or Cb or Cr color space. The functionalities of the CLD are basically the matching: – Image-to-image matching – Video clip-to-video clip matching Remark that the CLD is one of the most precise and fast color descriptor. == Extraction == The extraction process of this color descriptor consists of four stages: Image partitioning Representative color selection DCT transformation Zigzag scanning The standard MPEG-7 recommends using the YCbCr color space for the CLD. === Image partitioning === In the image partitioning stage, the input picture (on RGB color space) is divided into 64 blocks to guarantee the invariance to resolution or scale. The inputs and outputs of this step are summarized in the following table: === Representative color selection === After the image partitioning stage, a single representative color is selected from each block. Any method to select the representative color can be applied, but the standard recommends the use of the average of the pixel colors in a block as the corresponding representative color, since it is simpler and the description accuracy is sufficient in general. The selection results in a tiny image icon of size 8x8. The next figure shows this process. Note that in the image of the figure, the resolution of the original image has been maintained only in order to facilitate its representation. The inputs and outputs of this stage are summarized in the next table: Once the tiny image icon is obtained, the color space conversion between RGB and YCbCr is applied. === DCT transformation === In the fourth stage, the luminance (Y) and the blue and red chrominance (Cb and Cr) are transformed by 8x8 DCT, so three sets of 64 DCT coefficients are obtained. To calculate the DCT in a 2D array, the formulas below are used. B p q = α p α q ∑ m = 0 M − 1 ∑ n = 0 N − 1 A m n cos π ( 2 m + 1 ) p 2 M cos π ( 2 n + 1 ) q 2 N , 0 ≤ p ≤ M − 1 , 0 ≤ q ≤ N − 1 {\displaystyle B_{pq}=\alpha _{p}\alpha _{q}\sum _{m=0}^{M-1}\sum _{n=0}^{N-1}A_{mn}\cos {\frac {\pi (2m+1)p}{2M}}\cos {\frac {\pi (2n+1)q}{2N}},\qquad 0\leq p\leq M-1,\;0\leq q\leq N-1} α p = { 1 M , p = 0 2 M , 1 ≤ p ≤ M − 1 α q = { 1 N , q = 0 2 N , 1 ≤ q ≤ N − 1 {\displaystyle \alpha _{p}={\begin{cases}{\frac {1}{\sqrt {M}}},&p=0\\{\sqrt {\frac {2}{M}}},&1\leq p\leq M-1\end{cases}}\qquad \alpha _{q}={\begin{cases}{\frac {1}{\sqrt {N}}},&q=0\\{\sqrt {\frac {2}{N}}},&1\leq q\leq N-1\end{cases}}} The inputs and outputs of this stage are summarized in the next table: === Zigzag scanning === A zigzag scanning is performed with these three sets of 64 DCT coefficients, following the schema presented in the figure. The purpose of the zigzag scan is to group the low frequency coefficients of the 8x8 matrix into a vector. The inputs and outputs of this stage are summarized in the next table: Finally, these three set of matrices correspond to the CLD of the input image. == Matching == The matching process helps to evaluate if two elements are equal comparing both elements and calculating the distance between them. In the case of color descriptors the matching process helps to evaluate if two images are similar. Its procedure is the following: – Given an image as an input, the application attempts to find an image with a similar descriptor in a data base of images. If we consider two CLDs: {DY, DCb, DCr} { DY‟, DCb‟, DCr‟ }, The distance between the two descriptors can be computed as: D = ∑ i w y i ( D Y i − D Y i ′ ) 2 + ∑ i w b i ( D C b i − D C b i ′ ) 2 + ∑ i w r i ( D C r i − D C r i ′ ) 2 {\displaystyle D={\sqrt {\sum _{i}w_{yi}(DY_{i}-DY_{i}')^{2}}}+{\sqrt {\sum _{i}w_{bi}(DCb_{i}-DCb_{i}')^{2}}}+{\sqrt {\sum _{i}w_{ri}(DCr_{i}-DCr_{i}')^{2}}}} The subscript i represents the zigzag-scanning order of the coefficients. Furthermore, notice that is possible to weight the coefficients (w) in order to adjust the performance of the matching process. These weights let us give to some components of the descriptor more importance than others. Observing the formula, it can be extracted that: – 2 images are the same if the distance is 0 – 2 images are similar if the distance is near to 0 Therefore, this matching process will let to identify images with similar color descriptors. Since the complexity of the similarity matching process shown above is low, high-speed image matching can be achieved.
Read more →
Contrast-to-noise ratio (CNR) is a measure used to determine image quality. CNR is similar to the metric signal-to-noise ratio (SNR), but subtracts a term before taking the ratio. This is important when there is a significant bias in an image, such as from haze. As can be seen in the picture at right, the intensity is rather high even though the features of the image are washed out by the haze. Thus this image may have a high SNR metric, but will have a low CNR metric. One way to define contrast-to-noise ratio is: C = | S A − S B | σ o {\displaystyle C={\frac {|S_{A}-S_{B}|}{\sigma _{o}}}} where SA and SB are signal intensities for signal producing structures A and B in the region of interest and σo is the standard deviation of the pure image noise.
Read more →
Digital image correlation and tracking is an optical method that employs tracking and image registration techniques for accurate 2D and 3D measurements of changes in 2D images or 3D volumes. This method is often used to measure full-field displacement and strains, and it is widely applied in many areas of science and engineering. Compared to strain gauges and extensometers, digital image correlation methods provide finer details about deformation, due to the ability to provide both local and average data. == Overview == Digital image correlation (DIC) techniques have been increasing in popularity, especially in micro- and nano-scale mechanical testing applications due to their relative ease of implementation and use. Advances in computer technology and digital cameras have been the enabling technologies for this method and while white-light optics has been the predominant approach, DIC can be and has been extended to almost any imaging technology. The concept of using cross-correlation to measure shifts in datasets has been known for a long time, and it has been applied to digital images since at least the early 1970s. The present-day applications are almost innumerable, including image analysis, image compression, velocimetry, and strain estimation. Much early work in DIC in the field of mechanics was led by researchers at the University of South Carolina in the early 1980s and has been optimized and improved in recent years. Commonly, DIC relies on finding the maximum of the correlation array between pixel intensity array subsets on two or more corresponding images, which gives the integer translational shift between them. It is also possible to estimate shifts to a finer resolution than the resolution of the original images, which is often called "sub-pixel" registration because the measured shift is smaller than an integer pixel unit. For sub-pixel interpolation of the shift, other methods do not simply maximize the correlation coefficient. An iterative approach can also be used to maximize the interpolated correlation coefficient by using non-linear optimization techniques. The non-linear optimization approach tends to be conceptually simpler and can handle large deformations more accurately, but as with most nonlinear optimization techniques, it is slower. The two-dimensional discrete cross correlation r i j {\displaystyle r_{ij}} can be defined in several ways, one possibility being: r i j = ∑ m ∑ n [ f ( m + i , n + j ) − f ¯ ] [ g ( m , n ) − g ¯ ] ∑ m ∑ n [ f ( m , n ) − f ¯ ] 2 ∑ m ∑ n [ g ( m , n ) − g ¯ ] 2 . {\displaystyle r_{ij}={\frac {\sum _{m}\sum _{n}[f(m+i,n+j)-{\bar {f}}][g(m,n)-{\bar {g}}]}{\sqrt {\sum _{m}\sum _{n}{[f(m,n)-{\bar {f}}]^{2}}\sum _{m}\sum _{n}{[g(m,n)-{\bar {g}}]^{2}}}}}.} Here f(m, n) is the pixel intensity or the gray-scale value at a point (m, n) in the original image, g(m, n) is the gray-scale value at a point (m, n) in the translated image, f ¯ {\displaystyle {\bar {f}}} and g ¯ {\displaystyle {\bar {g}}} are mean values of the intensity matrices f and g respectively. However, in practical applications, the correlation array is usually computed using Fourier-transform methods, since the fast Fourier transform is a much faster method than directly computing the correlation. F = F { f } , G = F { g } . {\displaystyle \mathbf {F} ={\mathcal {F}}\{f\},\quad \mathbf {G} ={\mathcal {F}}\{g\}.} Then taking the complex conjugate of the second result and multiplying the Fourier transforms together elementwise, we obtain the Fourier transform of the correlogram, R {\displaystyle \ R} : R = F ∘ G ∗ , {\displaystyle R=\mathbf {F} \circ \mathbf {G} ^{},} where ∘ {\displaystyle \circ } is the Hadamard product (entry-wise product). It is also fairly common to normalize the magnitudes to unity at this point, which results in a variation called phase correlation. Then the cross-correlation is obtained by applying the inverse Fourier transform: r = F − 1 { R } . {\displaystyle \ r={\mathcal {F}}^{-1}\{R\}.} At this point, the coordinates of the maximum of r i j {\displaystyle r_{ij}} give the integer shift: ( Δ x , Δ y ) = arg max ( i , j ) { r } . {\displaystyle (\Delta x,\Delta y)=\arg \max _{(i,j)}\{r\}.} == Deformation mapping == For deformation mapping, the mapping function that relates the images can be derived from comparing a set of subwindow pairs over the whole images. (Figure 1). The coordinates or grid points (xi, yj) and (xi, yj) are related by the translations that occur between the two images. If the deformation is small and perpendicular to the optical axis of the camera, then the relation between (xi, yj) and (xi, yj) can be approximated by a 2D affine transformation such as: x ∗ = x + u + ∂ u ∂ x Δ x + ∂ u ∂ y Δ y , {\displaystyle x^{}=x+u+{\frac {\partial u}{\partial x}}\Delta x+{\frac {\partial u}{\partial y}}\Delta y,} y ∗ = y + v + ∂ v ∂ x Δ x + ∂ v ∂ y Δ y . {\displaystyle y^{}=y+v+{\frac {\partial v}{\partial x}}\Delta x+{\frac {\partial v}{\partial y}}\Delta y.} Here u and v are translations of the center of the sub-image in the X and Y directions respectively. The distances from the center of the sub-image to the point (x, y) are denoted by Δ x {\displaystyle \Delta x} and Δ y {\displaystyle \Delta y} . Thus, the correlation coefficient rij is a function of displacement components (u, v) and displacement gradients ∂ u ∂ x , ∂ u ∂ y , ∂ v ∂ x , ∂ v ∂ y . {\displaystyle {\frac {\partial u}{\partial x}},{\frac {\partial u}{\partial y}},{\frac {\partial v}{\partial x}},{\frac {\partial v}{\partial y}}.} DIC has proven to be very effective at mapping deformation in macroscopic mechanical testing, where the application of specular markers (e.g. paint, toner powder) or surface finishes from machining and polishing provide the needed contrast to correlate images well. However, these methods for applying surface contrast do not extend to the application of free-standing thin films for several reasons. First, vapor deposition at normal temperatures on semiconductor grade substrates results in mirror-finish quality films with RMS roughnesses that are typically on the order of several nanometers. No subsequent polishing or finishing steps are required, and unless electron imaging techniques are employed that can resolve microstructural features, the films do not possess enough useful surface contrast to adequately correlate images. Typically this challenge can be circumvented by applying paint that results in a random speckle pattern on the surface, although the large and turbulent forces resulting from either spraying or applying paint to the surface of a free-standing thin film are too high and would break the specimens. In addition, the sizes of individual paint particles are on the order of μms, while the film thickness is only several hundred nanometers, which would be analogous to supporting a large boulder on a thin sheet of paper. == Digital volume correlation == Digital Volume Correlation (DVC, and sometimes called Volumetric-DIC) extends the 2D-DIC algorithms into three dimensions to calculate the full-field 3D deformation from a pair of 3D images. This technique is distinct from 3D-DIC, which only calculates the 3D deformation of an exterior surface using conventional optical images. The DVC algorithm is able to track full-field displacement information in the form of voxels instead of pixels. The theory is similar to above except that another dimension is added: the z-dimension. The displacement is calculated from the correlation of 3D subsets of the reference and deformed volumetric images, which is analogous to the correlation of 2D subsets described above. DVC can be performed using volumetric image datasets. These images can be obtained using confocal microscopy, X-ray computed tomography, Magnetic Resonance Imaging or other techniques. Similar to the other DIC techniques, the images must exhibit a distinct, high-contrast 3D "speckle pattern" to ensure accurate displacement measurement. DVC was first developed in 1999 to study the deformation of trabecular bone using X-ray computed tomography images. Since then, applications of DVC have grown to include granular materials, metals, foams, composites and biological materials. To date it has been used with images acquired by MRI imaging, Computer Tomography (CT), micro-CT, confocal microscopy, and lightsheet microscopy. DVC is currently considered to be ideal in the research world for 3D quantification of local displacements, strains, and stress in biological specimens. It is preferred because of the non-invasiveness of the method over traditional experimental methods. Two of the key challenges are improving the speed and reliability of the DVC measurement. The 3D imaging techniques produce noisier images than conventional 2D optical images, which reduces the quality of the displacement measurement. Computational speed is restricted by the file sizes of 3D images, which are significantly larger than 2D images. For example, an
Read more →
A Gorn address (Gorn, 1967) is a method of identifying and addressing any node within a tree data structure. This notation is often used for identifying nodes in a parse tree defined by phrase structure rules. The Gorn address is a sequence of zero or more integers conventionally separated by dots, e.g., 0 or 1.0.1. The root which Gorn calls can be regarded as the empty sequence. And the j {\displaystyle j} -th child of the i {\displaystyle i} -th child has an address i . j {\displaystyle i.j} , counting from 0. It is named after American computer scientist Saul Gorn.
Read more →
Digital image correlation and tracking is an optical method that employs tracking and image registration techniques for accurate 2D and 3D measurements of changes in 2D images or 3D volumes. This method is often used to measure full-field displacement and strains, and it is widely applied in many areas of science and engineering. Compared to strain gauges and extensometers, digital image correlation methods provide finer details about deformation, due to the ability to provide both local and average data. == Overview == Digital image correlation (DIC) techniques have been increasing in popularity, especially in micro- and nano-scale mechanical testing applications due to their relative ease of implementation and use. Advances in computer technology and digital cameras have been the enabling technologies for this method and while white-light optics has been the predominant approach, DIC can be and has been extended to almost any imaging technology. The concept of using cross-correlation to measure shifts in datasets has been known for a long time, and it has been applied to digital images since at least the early 1970s. The present-day applications are almost innumerable, including image analysis, image compression, velocimetry, and strain estimation. Much early work in DIC in the field of mechanics was led by researchers at the University of South Carolina in the early 1980s and has been optimized and improved in recent years. Commonly, DIC relies on finding the maximum of the correlation array between pixel intensity array subsets on two or more corresponding images, which gives the integer translational shift between them. It is also possible to estimate shifts to a finer resolution than the resolution of the original images, which is often called "sub-pixel" registration because the measured shift is smaller than an integer pixel unit. For sub-pixel interpolation of the shift, other methods do not simply maximize the correlation coefficient. An iterative approach can also be used to maximize the interpolated correlation coefficient by using non-linear optimization techniques. The non-linear optimization approach tends to be conceptually simpler and can handle large deformations more accurately, but as with most nonlinear optimization techniques, it is slower. The two-dimensional discrete cross correlation r i j {\displaystyle r_{ij}} can be defined in several ways, one possibility being: r i j = ∑ m ∑ n [ f ( m + i , n + j ) − f ¯ ] [ g ( m , n ) − g ¯ ] ∑ m ∑ n [ f ( m , n ) − f ¯ ] 2 ∑ m ∑ n [ g ( m , n ) − g ¯ ] 2 . {\displaystyle r_{ij}={\frac {\sum _{m}\sum _{n}[f(m+i,n+j)-{\bar {f}}][g(m,n)-{\bar {g}}]}{\sqrt {\sum _{m}\sum _{n}{[f(m,n)-{\bar {f}}]^{2}}\sum _{m}\sum _{n}{[g(m,n)-{\bar {g}}]^{2}}}}}.} Here f(m, n) is the pixel intensity or the gray-scale value at a point (m, n) in the original image, g(m, n) is the gray-scale value at a point (m, n) in the translated image, f ¯ {\displaystyle {\bar {f}}} and g ¯ {\displaystyle {\bar {g}}} are mean values of the intensity matrices f and g respectively. However, in practical applications, the correlation array is usually computed using Fourier-transform methods, since the fast Fourier transform is a much faster method than directly computing the correlation. F = F { f } , G = F { g } . {\displaystyle \mathbf {F} ={\mathcal {F}}\{f\},\quad \mathbf {G} ={\mathcal {F}}\{g\}.} Then taking the complex conjugate of the second result and multiplying the Fourier transforms together elementwise, we obtain the Fourier transform of the correlogram, R {\displaystyle \ R} : R = F ∘ G ∗ , {\displaystyle R=\mathbf {F} \circ \mathbf {G} ^{},} where ∘ {\displaystyle \circ } is the Hadamard product (entry-wise product). It is also fairly common to normalize the magnitudes to unity at this point, which results in a variation called phase correlation. Then the cross-correlation is obtained by applying the inverse Fourier transform: r = F − 1 { R } . {\displaystyle \ r={\mathcal {F}}^{-1}\{R\}.} At this point, the coordinates of the maximum of r i j {\displaystyle r_{ij}} give the integer shift: ( Δ x , Δ y ) = arg max ( i , j ) { r } . {\displaystyle (\Delta x,\Delta y)=\arg \max _{(i,j)}\{r\}.} == Deformation mapping == For deformation mapping, the mapping function that relates the images can be derived from comparing a set of subwindow pairs over the whole images. (Figure 1). The coordinates or grid points (xi, yj) and (xi, yj) are related by the translations that occur between the two images. If the deformation is small and perpendicular to the optical axis of the camera, then the relation between (xi, yj) and (xi, yj) can be approximated by a 2D affine transformation such as: x ∗ = x + u + ∂ u ∂ x Δ x + ∂ u ∂ y Δ y , {\displaystyle x^{}=x+u+{\frac {\partial u}{\partial x}}\Delta x+{\frac {\partial u}{\partial y}}\Delta y,} y ∗ = y + v + ∂ v ∂ x Δ x + ∂ v ∂ y Δ y . {\displaystyle y^{}=y+v+{\frac {\partial v}{\partial x}}\Delta x+{\frac {\partial v}{\partial y}}\Delta y.} Here u and v are translations of the center of the sub-image in the X and Y directions respectively. The distances from the center of the sub-image to the point (x, y) are denoted by Δ x {\displaystyle \Delta x} and Δ y {\displaystyle \Delta y} . Thus, the correlation coefficient rij is a function of displacement components (u, v) and displacement gradients ∂ u ∂ x , ∂ u ∂ y , ∂ v ∂ x , ∂ v ∂ y . {\displaystyle {\frac {\partial u}{\partial x}},{\frac {\partial u}{\partial y}},{\frac {\partial v}{\partial x}},{\frac {\partial v}{\partial y}}.} DIC has proven to be very effective at mapping deformation in macroscopic mechanical testing, where the application of specular markers (e.g. paint, toner powder) or surface finishes from machining and polishing provide the needed contrast to correlate images well. However, these methods for applying surface contrast do not extend to the application of free-standing thin films for several reasons. First, vapor deposition at normal temperatures on semiconductor grade substrates results in mirror-finish quality films with RMS roughnesses that are typically on the order of several nanometers. No subsequent polishing or finishing steps are required, and unless electron imaging techniques are employed that can resolve microstructural features, the films do not possess enough useful surface contrast to adequately correlate images. Typically this challenge can be circumvented by applying paint that results in a random speckle pattern on the surface, although the large and turbulent forces resulting from either spraying or applying paint to the surface of a free-standing thin film are too high and would break the specimens. In addition, the sizes of individual paint particles are on the order of μms, while the film thickness is only several hundred nanometers, which would be analogous to supporting a large boulder on a thin sheet of paper. == Digital volume correlation == Digital Volume Correlation (DVC, and sometimes called Volumetric-DIC) extends the 2D-DIC algorithms into three dimensions to calculate the full-field 3D deformation from a pair of 3D images. This technique is distinct from 3D-DIC, which only calculates the 3D deformation of an exterior surface using conventional optical images. The DVC algorithm is able to track full-field displacement information in the form of voxels instead of pixels. The theory is similar to above except that another dimension is added: the z-dimension. The displacement is calculated from the correlation of 3D subsets of the reference and deformed volumetric images, which is analogous to the correlation of 2D subsets described above. DVC can be performed using volumetric image datasets. These images can be obtained using confocal microscopy, X-ray computed tomography, Magnetic Resonance Imaging or other techniques. Similar to the other DIC techniques, the images must exhibit a distinct, high-contrast 3D "speckle pattern" to ensure accurate displacement measurement. DVC was first developed in 1999 to study the deformation of trabecular bone using X-ray computed tomography images. Since then, applications of DVC have grown to include granular materials, metals, foams, composites and biological materials. To date it has been used with images acquired by MRI imaging, Computer Tomography (CT), micro-CT, confocal microscopy, and lightsheet microscopy. DVC is currently considered to be ideal in the research world for 3D quantification of local displacements, strains, and stress in biological specimens. It is preferred because of the non-invasiveness of the method over traditional experimental methods. Two of the key challenges are improving the speed and reliability of the DVC measurement. The 3D imaging techniques produce noisier images than conventional 2D optical images, which reduces the quality of the displacement measurement. Computational speed is restricted by the file sizes of 3D images, which are significantly larger than 2D images. For example, an
Read more →
Cygwin ( SIG-win) is a free and open-source Unix-like environment and command-line interface (CLI) for Microsoft Windows. The project also provides a software repository containing open-source packages. Cygwin allows source code for Unix-like operating systems to be compiled and run on Windows. Cygwin provides native integration of Windows-based applications. The terminal emulator mintty is the default command-line interface provided to interact with the environment. The Cygwin installation directory layout mimics the root file system of Unix-like systems, with directories such as /bin, /home, /etc, /usr, and /var. Cygwin is released under the GNU Lesser General Public License version 3. It was originally developed by Cygnus Solutions, which was later acquired by Red Hat (now part of IBM), to port the GNU toolchain to Win32, including the GNU Compiler Suite. Rather than rewrite the tools to use the Win32 runtime environment, Cygwin implemented a POSIX-compatible environment in the form of a DLL. The brand motto is "Get that Linux feeling – on Windows", although Cygwin doesn't have Linux in it. == History == Cygwin began in 1995 as a project of Steve Chamberlain, a Cygnus engineer who observed that Windows NT and 95 used COFF as their object file format, and that GNU already included support for x86 and COFF, and the C library newlib. He thought that it would be possible to retarget GCC and produce a cross compiler generating executables that could run on Windows. A prototype was later developed. Chamberlain bootstrapped the compiler on a Windows system, to emulate Unix to let the GNU configure shell script run. Initially, Cygwin was called Cygwin32. When Microsoft registered the trademark Win32, the "32" was dropped to simply become Cygwin. In 1999, Cygnus offered Cygwin 1.0 as a commercial product. Subsequent versions have not been released, instead relying on continued open source releases. Geoffrey Noer was the project lead from 1996 to 1999. Christopher Faylor was lead from 1999 to 2004; he left Red Hat and became co-lead with Corinna Vinschen. Corinna Vinschen has been the project lead from mid-2014 to date (as of September, 2024). From June 23, 2016, the Cygwin library version 2.5.2 was licensed under the GNU Lesser General Public License (LGPL) version 3. == Description == Cygwin is provided in two versions: the full 64-bit version and a stripped-down 32-bit version, whose final version was released in 2022. Cygwin consists of a library that implements the POSIX system call API in terms of Windows system calls to enable the running of a large number of application programs equivalent to those on Unix systems, and a GNU development toolchain (including GCC and GDB). Programmers have ported the X Window System, K Desktop Environment 3, GNOME, Apache, and TeX. Cygwin permits installing inetd, syslogd, sshd, Apache, and other daemons as standard Windows services. Cygwin programs have full access to the Windows API and other Windows libraries. Cygwin programs are installed by running Cygwin's "setup" program, which downloads them from repositories on the Internet. The Cygwin API library is licensed under the GNU Lesser General Public License version 3 (or later), with an exception to allow linking to any free and open-source software whose license conforms to the Open Source Definition. Cygwin consists of two parts: A dynamic-link library in the form of a C standard library that acts as a compatibility layer for the POSIX API and A collection of software tools and applications that provide a Unix-like look and feel. Cygwin supports POSIX symbolic links, representing them as plain-text files with the system attribute set. Cygwin 1.5 represented them as Windows Explorer shortcuts, but this was changed for reasons of performance and POSIX correctness. Cygwin also recognises NTFS junction points and symbolic links and treats them as POSIX symbolic links, but it does not create them. The POSIX API for handling access control lists (ACLs) is supported. === Technical details === A Cygwin-specific version of the Unix mount command allows mounting Windows paths as "filesystems" in the Unix file space. Initial mount points can be configured in /etc/fstab, which has a format very similar to Unix systems, except that Windows paths appear in place of devices. Filesystems can be mounted in binary mode (by default), or in text mode, which enables automatic conversion between LF and CRLF endings (which only affects programs that open files without explicitly specifying text or binary mode). Cygwin 1.7 introduced comprehensive support for POSIX locales, and the UTF-8 Unicode encoding became the default. The fork system call for duplicating a process is fully implemented, but the copy-on-write optimization strategy could not be used. Cygwin's default user interface is the bash shell running in the mintty terminal emulator. The DLL also implements pseudo terminal (pty) devices, and Cygwin ships with a number of terminal emulators that are based on them, including rxvt/urxvt and xterm. The version of GCC that comes with Cygwin has various extensions for creating Windows DLLs, such as specifying whether a program is a windowing or console-mode program. Support for compiling programs that do not require the POSIX compatibility layer provided by the Cygwin DLL used to be included in the default GCC, but as of 2014, it is provided by cross-compilers contributed by the MinGW-w64 project. == Software packages == Cygwin's base package selection is approximately 100MB, containing the bash (interactive user) and dash (installation) shells and the core file and text manipulation utilities. Additional packages are available as optional installs from within the Cygwin "setup" program and package manager ("setup-x86_64.exe" – 64 bit). The Cygwin Ports project provided additional packages that were not available in the Cygwin distribution itself. Examples included GNOME, K Desktop Environment 3, MySQL database, and the PHP scripting language. Most ports have been adopted by volunteer maintainers as Cygwin packages, and Cygwin Ports are no longer maintained. Cygwin ships with GTK+ and Qt. The Cygwin/X project allows graphical Unix programs to display their user interfaces on the Windows desktop for both local and remote programs.
Read more →
The Distributed Common Ground System (DCGS) is a system which produces military intelligence for multiple branches of the American military. == DCGS Programs == DCGS-N - DCGS for the United States Navy DCGS-A - DCGS for the United States Army AF DCGS - DCGS for the United States Air Force DCGS-MC - DCGS for the United States Marine Corps DCGS-SOF - DCGS for the United States Special Operations Forces IS&A Support Center - DCGS-A Help Desk for the United States Army - https://dcgsahelp.max.gov/ - Max.gov sunset 15 December 2023 == Description == While in U.S. Air Force use, the system produces intelligence collected by the U-2 Dragonlady, RQ-4 Global Hawk, MQ-9 Reaper and MQ-1 Predator. The previous system of similar use was the Deployable Ground Station (DGS), which was first deployed in July 1994. Subsequent version of DGS were developed from 1995 through 2009. Although officially designated a "weapons system", it consists of computer hardware and software connected together in a computer network, devoted to processing and dissemination of information such as images. The 480th Intelligence, Surveillance and Reconnaissance Wing of the Air Combat Command operates and maintains the USAF system. A plan envisioned in 1998 was to develop interoperable systems for the Army and Navy, in addition to the Air Force. By 2006, version 10.6 was deployed by the Air Force, and a version known as DCGS-A was developed for the Army. After a 2010 report by General Michael T. Flynn, the program was intended to use cloud computing and be as easy to use as an iPad, which soldiers over a few years were commonly using. By April 2011, project manager Colonel Charles Wells announced version 3 of the Army system (code named "Griffin") was being deployed in the US war in Afghanistan. In January 2012, the United States Army Communications-Electronics Research, Development and Engineering Center hosted a meeting based on the DCGS-A early experience. It brought together technology providers in the hope of developing more integrated systems using cloud computing with open architectures, compared to previously specialized custom-built systems. A major contractor was Lockheed Martin, with computers supplied by Silicon Graphics International out of its Chippewa Falls, Wisconsin office. Software known as the Analyst's Notebook, originally developed by i2 Limited, was included in DCGS-A. IBM acquired i2 in 2011. Some US Army personnel reported using a Palantir Technologies product to improve their ability to predict locations of improvised explosive devices. An April 2012 report recommending further study after initial success. Palantir software was rated easy to use, but did not have the flexibility and wide number of data sources of DCGS-A. In July 2012, Congressman Duncan D. Hunter (from California, the state where Palantir is based) complained of US DoD obstacles to its wider use. Although a limited test in August 2011 by the Test and Evaluation Command had recommended deployment, operation problems of DCGS-A included the baseline system was "not operationally effective" with reboots on average about every 8 hours. A set of improvements was identified in November 2012. The press reported some of the shortcomings uncovered by General Genaro Dellarocco in the tests. The ambitious goal of integrating 473 data sources for 75 million reports proved to be challenging, after spending an estimated $2.3 billion on the Army system alone. In May 2013 Politico reported that Palantir lobbyists and some anonymous returning veterans continued to advocate the use of its software, despite its interoperability limits. In particular, members of special forces and US Marines were not required to use the official Army system. Similar stories appeared in other publications, with Army representatives (such as Major General Mary A. Legere) citing the limitations of various systems. Congressman Hunter was a member of the House Armed Services Committee which required a review of the program, after two other members of congress sent an open letter to Secretary of Defense Leon Panetta. The Senate Defense Appropriations Subcommittee included testimony from Army Chief of Staff General Ray Odierno. The 130th Engineer Brigade (United States) has found the system to be "unstable, slow, not friendly and a major hindrance to operations". The equivalent system for the United States Navy was planned for initial deployment by 2015, and within a shipboard network called Consolidated Afloat Networks and Enterprise Services (CANES) by 2016. Some early testing was announced in 2009 aboard the aircraft carrier USS Harry Truman. A portion of the software, a distributed data framework for the DCGS integration backbone (DIB) version 4, was submitted to an open-source software repository of the Codice Foundation on GitHub. The framework was new for DIB version 4, replacing the legacy DIB portal with an Ozone Widget Framework interface. It was written in the Java programming language. == DCGS-A == Distributed Common Ground System-Army (DCGS-A) is the United States Army's primary system to post data, process information, and disseminate Intelligence, Surveillance and Reconnaissance (ISR) information about the threat, weather, and terrain to echelons. DCGS-A provides commanders the ability to task battle-space sensors and receive intelligence information from multiple sources. === Promotion === An August 17, 2011, UPI article quoted i2 Chief Executive Officer Robert Griffin who commented on DCGS-A's best-of-breed approach to development. The article detailed the Army contracting with i2 for Analyst's Notebook software. "With its open architecture, Analyst's Notebook supports the Army's strategy to employ and integrate best-of-breed solutions from across the industry to meet the dynamic needs users face in the field on a daily basis." A February 1, 2012, article in the Army web page quoted Mark Kitz, DCGS-A technical director. DCGS-A "uses the latest in cloud technology to rapidly gather, collaborate and share intelligence data from multiple sources to deliver a common operating picture. DCGS-A is able to rapidly adapt to changing operational environments by leveraging an iterative development model and open architecture allowing for collaboration with multiple government, industry and academic partners." A July 2012 article in SIGNAL Magazine, monthly publication of the Armed Forces Communications and Electronics Association, promoted DCGS-A as taking advantage of technological environments with which young soldiers are familiar. The article quoted the DCGS-A program manager, Col. Charles Wells on the systems benefits. The article also included Lockheed Martin's DCGS-A program manager. The Milwaukee Journal Sentinel published an article May 4, 2012, about Wisconsin-located companies helping DCGS-A with cloud computing technology. The article promoted the speed when cloud computing processes intelligence and cost savings by analyzing data in the field. === The U.S. Army's 2011 Posture Statement === The U.S. Army released its 2011 Army Posture Statement March 2. It included a statement on DCGS-A: “The Distributed Common Ground System-Army (DCGS-A) is the Army's premier intelligence, surveillance, and reconnaissance (ISR) enterprise for the tasking of sensors, analysis and processing of data, exploitation of data, and dissemination of intelligence (TPED) across all echelons. It is the Army component of the larger Defense Intelligence Information Enterprise (DI2E) and interoperable with other Service DCGS programs. Under the DI2E framework, USD (I) hopes to provide COCOM Joint Intelligence Operations Centers (JIOCs) capabilities interoperable with DCGS-A through a Cloud/widget approach. DCGS-A connects tactical, operational, and theater-level commanders to hundreds of intelligence and intelligence-related data sources at all classification levels and allows them to focus efforts of the entire ISR community on their information requirements. === Comparisons === Some Ground Commanders who describe DCGS-A as "unwieldy and unreliable, hard to learn and difficult to use," supporting alternative software from Palantir Technologies. Palantir software supports small unit situational awareness, but is not sufficiently funded to support the broader role that DCGS-A fulfills. == Operators == 480th Intelligence, Surveillance and Reconnaissance Wing 9th Intelligence Squadron 13th Intelligence Squadron 548th Intelligence, Surveillance and Reconnaissance Group 548 Operational Support Squadron 48th Intelligence Squadron 101st Intelligence Squadron 113th Air Support Operations Squadron 127th Command and Control Squadron 161st Intelligence Squadron
Read more →
WS-Security Policy is a web services specification, created by IBM and 12 co-authors, that has become an OASIS standard as of version 1.2. It extends the fundamental security protocols specified by the WS-Security, WS-Trust and WS-Secure Conversation by offering mechanisms to represent the capabilities and requirements of web services as policies. Security policy assertions are based on the WS-Policy framework. Policy assertions can be used to require more generic security attributes like transport layer security
A message queueing service is a message-oriented middleware or MOM deployed in a compute cloud using software as a service model. Service subscribers access queues and or topics to exchange data using point-to-point or publish and subscribe patterns. It's important to differentiate between event-driven and message-driven (aka queue driven) services: Event-driven services (e.g. AWS SNS) are decoupled from their consumers. Whereas queue / message driven services (e.g. AWS SQS) are coupled with their consumers. Message queues can be a good buffer to handle spiky workloads but they have a finite capacity. According to Gregor Hohpe, message queues require proper mechanisms (aka flow controls) to avoid filling the queue beyond its manageable capacity and to keep the system stable. == Ordering Guarantees in Message Queues == Amazon SQS FIFO and Azure Service Bus sessions are queue-based messaging systems that provide ordering guarantees within a message group or session attempt but do not necessarily guarantee ordered delivery in cases of retries or failures. In SQS FIFO, messages in the same message group are processed in order, with subsequent messages held until the preceding message is successfully processed or moved to the dead-letter queue (DLQ). Once a message is placed in the DLQ, it is no longer retried, creating a gap in the sequence. However, the remaining messages continue to be delivered in order. Azure Service Bus sessions function similarly by maintaining ordering within a session, provided a single consumer processes messages sequentially. The implementation differs from SQS FIFO but follows the same fundamental ordering principle. In contrast, Apache Kafka is a distributed log-based messaging system that guarantees ordering within individual partitions rather than across the entire topic. Unlike queue-based systems, Kafka retains messages in a durable, append-only log, allowing multiple consumers to read at different offsets. Kafka uses manual offset management, giving consumers control over retries and failure handling. If a consumer fails to process a message, it can delay committing the offset, preventing further progress in that partition while other partitions remain unaffected. This partition-based design enables fault isolation and parallel processing while allowing ordering to be maintained within partitions, depending on consumer handling. == Vendors == Apache Kafka Apache Kafka is a distributed system consisting of servers that store and forward messages between producer client and consumer applications. IBM MQ IBM MQ offers a managed service that can be used on IBM Cloud and Amazon Web Services. Microsoft Azure Service Bus Service Bus offers queues, topics & subscriptions, and rules/actions in order to support publish-subscribe, temporal decoupling, and load balancing scenarios. Azure Service Bus is built on AMQP allowing any existing AMQP 1.0 client stack to interact with Service Bus directly or via existing .Net, Java, Node, and Python clients. Standard and Premium tiers allow for pay as you go or isolated resources at massive scale. Oracle Messaging Cloud Service This service provides a messaging solution for applications for asynchronous communication and is influenced by the Java Message Service (JMS) API specification. Any application platform that understands HTTP can also use Oracle Messaging Cloud Service through the REST interface. For Java applications, Oracle Messaging Cloud Service provides a Java library that implements and extends the JMS 1.1 interface. The Java library implements the JMS API by acting as a client of the REST API. Amazon Simple Queue Service Supports messages natively up to 256K, or up to 2GB by transmitting payload via S3. Highly scalable, durable and resilient. Provides loose-FIFO and 'at least once' delivery in order to provide massive scale. Supports REST API and optional Java Message Service client. Low latency. Utilizes Amazon Web Services. IronMQ Supports messages up to 64k; guarantees order; guarantees once only delivery; no delays retrieving messages. Supports REST API and beanstalkd open source protocol. Runs on multiple clouds including AWS and Rackspace. Scaling must be managed by user. RabbitMQ RabbitMQ is a reliable and mature messaging and streaming broker, which is easy to deploy on cloud environments, on-premises, and on your local machine. Supports AMQP, STOMP, MQTT StormMQ Open platform supports messages up to 50Mb. Uses AMQP to avoid vendor lock-in and provide language neutrality. Locate-It Option allows customers to audit the location of their data at all times and satisfy data protection principles. AnypointMQ An enterprise multi-tenant, cloud messaging service that performs advanced asynchronous messaging scenarios between applications. Anypoint MQ is fully integrated with Anypoint Platform, offering role based access control, client application management, and connectors.
Read more →
Round-trip engineering (RTE) in the context of model-driven architecture is a functionality of software development tools that synchronizes two or more related software artifacts, such as, source code, models, configuration files, documentation, etc. between each other. The need for round-trip engineering arises when the same information is present in multiple artifacts and when an inconsistency may arise in case some artifacts are updated. For example, some piece of information was added to/changed in only one artifact (source code) and, as a result, it became missing in/inconsistent with the other artifacts (in models). == Overview == Round-trip engineering is closely related to traditional software engineering disciplines: forward engineering (creating software from specifications), reverse engineering (creating specifications from existing software), and reengineering (understanding existing software and modifying it). Round-trip engineering is often wrongly defined as simply supporting both forward and reverse engineering. In fact, the key characteristic of round-trip engineering that distinguishes it from forward and reverse engineering is the ability to synchronize existing artifacts that evolved concurrently by incrementally updating each artifact to reflect changes made to the other artifacts. Furthermore, forward engineering can be seen as a special instance of RTE in which only the specification is present and reverse engineering can be seen as a special instance of RTE in which only the software is present. Many reengineering activities can also be understood as RTE when the software is updated to reflect changes made to the previously reverse engineered specification. === Types === Various books describe two types of RTE: partial or uni-directional RTE: changes made to a higher level representation of a code and model are reflected in lower level, but not otherwise; the latter might be allowed, but with limitations that may not affect higher-level abstractions full or bi-directional RTE: regardless of changes, both higher and lower-level code and model representations are synchronized if any of them altered === Auto synchronization === Another characteristic of round-trip engineering is automatic update of the artifacts in response to automatically detected inconsistencies. In that sense, it is different from forward- and reverse engineering which can be both manual (traditionally) and automatic (via automatic generation or analysis of the artifacts). The automatic update can be either instantaneous or on-demand. In instantaneous RTE, all related artifacts are immediately updated after each change made to one of them. In on-demand RTE, authors of the artifacts may concurrently update the artifacts (even in a distributed setting) and at some point choose to execute matching to identify inconsistencies and choose to propagate some of them and reconcile potential conflicts. === Iterative approach === Round trip engineering may involve an iterative development process. After you have synchronized your model with revised code, you are still free to choose the best way to work – make further modifications to the code or make changes to your model. You can synchronize in either direction at any time and you can repeat the cycle as many times as necessary. == Software == Many commercial tools and research prototypes support this form of RTE; a 2007 book lists Rational Rose, Together, ESS-Model, BlueJ, and Fujaba among those capable, with Fujaba said to be capable to also identify design patterns. == Limitations == A 2005 book on Visual Studio notes for instance that a common problem in RTE tools is that the model reversed is not the same as the original one, unless the tools are aided by leaving laborious annotations in the source code. The behavioral parts of UML impose even more challenges for RTE. Usually, UML class diagrams are supported to some degree; however, certain UML concepts, such as associations and containment do not have straightforward representations in many programming languages which limits the usability of the created code and accuracy of code analysis/reverse engineering (e.g., containment is hard to recognize in the code). A more tractable form of round-trip engineering is implemented in the context of framework application programming interfaces (APIs), whereby a model describing the usage of a framework API by an application is synchronized with that application's code. In this setting, the API prescribes all correct ways the framework can be used in applications, which allows precise and complete detection of API usages in the code as well as creation of useful code implementing correct API usages. Two prominent RTE implementations in this category are framework-specific modeling languages and Spring Roo (Java). Round-trip engineering is critical for maintaining consistency among multiple models and between the models and the code in Object Management Group's (OMG) Model-driven architecture. OMG proposed the QVT (query/view/transformation) standard to handle model transformations required for MDA. To date, a few implementations of the standard have been created. (Need to present practical experiences with MDA in relation to RTE). == Controversies == === Code generation controversy === Code generation (forward-engineering) from models means that the user abstractly models solutions, which are connoted by some model data, and then an automated tool derives from the models parts or all of the source code for the software system. In some tools, the user can provide a skeleton of the program source code, in the form of a source code template where predefined tokens are then replaced with program source code parts during the code generation process. UML (if used for MDA) diagrams specification was criticized for lack the detail which is needed to contain the same information as is covered with the program source. Some developers even claim that "the Code is the design". == Disadvantages == There is a serious risk that the generated code will rapidly differ from the model or that the reverse-engineered model will lose its reflection on the code or a mix of these two problems as result of cycled reengineering efforts. Regarding behavioral/dynamic part of UML for features like statechart diagram there is no equivalents in programming languages. Their translation during code-generation will result in common programming statement (.e.g if,switch,enum) being either missing or misinterpreted. If edited and imported back may result in different or incomplete model. The same goes for code snippets used for code generation stage for the pattern-implementation and user-specific logic: intermixed they may not be easily reverse-engineered back. There is also general lack of advanced tooling for modelling that are comparable to that of modern IDEs (for testing, debugging, navigation, etc.) for general-purpose programming languages and domain-specific languages. == Examples in software engineering == Perhaps the most common form of round-trip engineering is synchronization between UML (Unified Modeling Language) models and the corresponding source code and entity–relationship diagrams in data modelling and database modelling. Round-trip engineering based on Unified Modeling Language (UML) needs three basic tools for software development: Source Code Editor; UML Editor for the Attributes and Methods; Visualisation of UML structure
Read more →