AI App On My Phone

AI App On My Phone — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Foveated imaging

  Foveated imaging is a digital image processing technique in which the image resolution, or amount of detail, varies across the image according to one or more "fixation points". A fixation point indicates the highest resolution region of the image and corresponds to the center of the eye's retina, the fovea. The location of a fixation point may be specified in many ways. For example, when viewing an image on a computer monitor, one may specify a fixation using a pointing device, like a computer mouse. Eye trackers which precisely measure the eye's position and movement are also commonly used to determine fixation points in perception experiments. When the display is manipulated with the use of an eye tracker, this is known as a gaze contingent display. Fixations may also be determined automatically using computer algorithms. Some common applications of foveated imaging include imaging sensor hardware and image compression. For descriptions of these and other applications, see the list below. Miniaturized foveated imaging systems can be realized by high-resolution 3D printing of multi-lens objectives directly on a CMOS (Complementary metal-oxide-semiconductor) chip. Foveated imaging is also commonly referred to as space variant imaging or gaze contingent imaging. == Applications == === Compression === Contrast sensitivity falls off dramatically as one moves from the center of the retina to the periphery. In lossy image compression, one may take advantage of this fact in order to compactly encode images. If one knows the viewer's approximate point of gaze, one may reduce the amount of information contained in the image as the distance from the point of gaze increases. Because the fall-off in the eye's resolution is dramatic, the potential reduction in display information can be substantial. Also, foveation encoding may be applied to the image before other types of image compression are applied and therefore can result in a multiplicative reduction. === Foveated sensors === Foveated sensors are multiresolution hardware devices that allow image data to be collected with higher resolution concentrated at a fixation point. An advantage to using foveated sensor hardware is that the image collection and encoding can occur much faster than in a system that post-processes a high resolution image in software. === Simulation === Foveated imaging has been used to simulate visual fields with arbitrary spatial resolution. For example, one may present video containing a blurred region representing a scotoma. By using an eye-tracker and holding the blurred region fixed relative to the viewer's gaze, the viewer will have a visual experience similar to that of a person with an actual scotoma. === Video gaming === Foveated rendering is a rendering optimization technique which uses an eye tracker integrated with a virtual reality headset to reduce the rendering workload by greatly reducing the image quality in the peripheral vision (outside of the zone gazed by the fovea).. However, other than the near-eye displays (e.g., virtual reality headset), foveated rendering is also suitable for large high-resolution display walls, desktop monitor, and even for smart phones. Over the time different foveated rendering techniques are proposed, for instance, adaptive resolution, geometric simplification, shading simplification and chromatic degradation, spatio-temporal deterioration . If we consider the variable sample distribution of physically-based rendering under the shader (e.g., hit/miss etc.), then this degradation strategies are applied on overall foveated rendering. At the CES 2016, SensoMotoric Instruments (SMI) demoed a new 250 Hz eye tracking system and a working foveated rendering solution. It resulted from a partnership with camera sensor manufacturer Omnivision who provided the camera hardware for the new system. The Apple Vision Pro mixed reality headset features dynamic foveated rendering provided by its visionOS operating system. === Quality assessment === Foveated imaging may be useful in providing a subjective image quality measure. Traditional image quality measures, such as peak signal-to-noise ratio, are typically performed on fixed resolution images and do not take into account some aspects of the human visual system, like the change in spatial resolution across the retina. A foveated quality index may therefore more accurately determine image quality as perceived by humans. === Image database retrieval === In databases that contain very high resolution images, such as a satellite image database, it may be desirable to interactively retrieve images in order to reduce retrieval time. Foveated imaging allows one to scan low resolution images and retrieve only high resolution portions as they are needed. This is sometimes called progressive transmission. == Example images ==

  Read more →
• 

  Surrogate model

  A surrogate model is an engineering method used when an outcome of interest cannot be easily measured or computed, so an approximate mathematical model of the outcome is used instead. Most engineering design problems require experiments and/or simulations to evaluate design objective and constraint functions as a function of design variables. For example, in order to find the optimal airfoil shape for an aircraft wing, an engineer simulates the airflow around the wing for different shape variables (e.g., length, curvature, material, etc.). For many real-world problems, however, a single simulation can take many minutes, hours, or even days to complete. As a result, routine tasks such as design optimization, design space exploration, sensitivity analysis and "what-if" analysis become impossible since they require thousands or even millions of simulation evaluations. One way of alleviating this burden is by constructing approximation models, known as surrogate models, metamodels or emulators, that mimic the behavior of the simulation model as closely as possible while being computationally cheaper to evaluate. Surrogate models are constructed using a data-driven, bottom-up approach. The exact, inner working of the simulation code is not assumed to be known (or even understood), relying solely on the input-output behavior. A model is constructed based on modeling the response of the simulator to a limited number of intelligently chosen data points. This approach is also known as behavioral modeling or black-box modeling, though the terminology is not always consistent. When only a single design variable is involved, the process is known as curve fitting. Though using surrogate models in lieu of experiments and simulations in engineering design is more common, surrogate modeling may be used in many other areas of science where there are expensive experiments and/or function evaluations. == Goals == The scientific challenge of surrogate modeling is the generation of a surrogate that is as accurate as possible, using as few simulation evaluations as possible. The process comprises three major steps which may be interleaved iteratively: Sample selection (also known as sequential design, optimal experimental design (OED) or active learning) Construction of the surrogate model and optimizing the model parameters (i.e., bias-variance tradeoff) Appraisal of the accuracy of the surrogate. The accuracy of the surrogate depends on the number and location of samples (expensive experiments or simulations) in the design space. A systematic data representation during training can improve model scalability, thereby reducing the need for expensive simulations. Various design of experiments (DOE) techniques cater to different sources of errors, in particular, errors due to noise in the data or errors due to an improper surrogate model. == Types of surrogate models == Popular surrogate modeling approaches are: polynomial response surfaces; kriging; more generalized Bayesian approaches; gradient-enhanced kriging (GEK); radial basis function; support vector machines; space mapping; artificial neural networks and Bayesian networks. Other methods recently explored include Fourier surrogate modeling , random forests, convolutional neural networks, and generative adversarial networks. For some problems, the nature of the true function is not known a priori, and therefore it is not clear which surrogate model will be the most accurate one. In addition, there is no consensus on how to obtain the most reliable estimates of the accuracy of a given surrogate. Many other problems have known physics properties. In these cases, physics-based surrogates such as space-mapping based models are commonly used. == Invariance properties == Recently proposed comparison-based surrogate models (e.g., ranking support vector machines) for evolutionary algorithms, such as CMA-ES, allow preservation of some invariance properties of surrogate-assisted optimizers: Invariance with respect to monotonic transformations of the function (scaling) Invariance with respect to orthogonal transformations of the search space (rotation) == Applications == An important distinction can be made between two different applications of surrogate models: design optimization and design space approximation (also known as emulation). In surrogate model-based optimization, an initial surrogate is constructed using some of the available budgets of expensive experiments and/or simulations. The remaining experiments/simulations are run for designs which the surrogate model predicts may have promising performance. The process usually takes the form of the following search/update procedure. Initial sample selection (the experiments and/or simulations to be run) Construct surrogate model Search surrogate model (the model can be searched extensively, e.g., using a genetic algorithm, as it is cheap to evaluate) Run and update experiment/simulation at new location(s) found by search and add to sample Iterate steps 2 to 4 until out of time or design is "good enough" Depending on the type of surrogate used and the complexity of the problem, the process may converge on a local or global optimum, or perhaps none at all. In design space approximation, one is not interested in finding the optimal parameter vector, but rather in the global behavior of the system. Here the surrogate is tuned to mimic the underlying model as closely as needed over the complete design space. Such surrogates are a useful, cheap way to gain insight into the global behavior of the system. Optimization can still occur as a post-processing step, although with no update procedure (see above), the optimum found cannot be validated. == Surrogate modeling software == Surrogate Modeling Toolbox (SMT: https://github.com/SMTorg/smt) is a Python package that contains a collection of surrogate modeling methods, sampling techniques, and benchmarking functions. This package provides a library of surrogate models that is simple to use and facilitates the implementation of additional methods. SMT is different from existing surrogate modeling libraries because of its emphasis on derivatives, including training derivatives used for gradient-enhanced modeling, prediction derivatives, and derivatives with respect to the training data. It also includes new surrogate models that are not available elsewhere: kriging by partial-least squares reduction and energy-minimizing spline interpolation. Python library SAMBO Optimization supports sequential optimization with arbitrary models, with tree-based models and Gaussian process models built in. Surrogates.jl is a Julia packages which offers tools like random forests, radial basis methods and kriging. == Surrogate-Assisted Evolutionary Algorithms (SAEAs) == SAEAs are an advanced class of optimization techniques that integrate evolutionary algorithms (EAs) with surrogate models. In traditional EAs, evaluating the fitness of candidate solutions often requires computationally expensive simulations or experiments. SAEAs address this challenge by building a surrogate model, which is a computationally inexpensive approximation of the objective function or constraint functions. The surrogate model serves as a substitute for the actual evaluation process during the evolutionary search. It allows the algorithm to quickly estimate the fitness of new candidate solutions, thereby reducing the number of expensive evaluations needed. This significantly speeds up the optimization process, especially in cases where the objective function evaluations are time-consuming or resource-intensive. SAEAs typically involve three main steps: (1) building the surrogate model using a set of initial sampled data points, (2) performing the evolutionary search using the surrogate model to guide the selection, crossover, and mutation operations, and (3) periodically updating the surrogate model with new data points generated during the evolutionary process to improve its accuracy. By balancing exploration (searching new areas in the solution space) and exploitation (refining known promising areas), SAEAs can efficiently find high-quality solutions to complex optimization problems. They have been successfully applied in various fields, including engineering design, machine learning, and computational finance, where traditional optimization methods may struggle due to the high computational cost of fitness evaluations.

  Read more →
• 

  Statistical relational learning

  Statistical relational learning (SRL) is a subdiscipline of artificial intelligence and machine learning that is concerned with domain models that exhibit both uncertainty (which can be dealt with using statistical methods) and complex, relational structure. Typically, the knowledge representation formalisms developed in SRL use (a subset of) first-order logic to describe relational properties of a domain in a general manner (universal quantification) and draw upon probabilistic graphical models (such as Bayesian networks or Markov networks) to model the uncertainty; some also build upon the methods of inductive logic programming. Significant contributions to the field have been made since the late 1990s. As is evident from the characterization above, the field is not strictly limited to learning aspects; it is equally concerned with reasoning (specifically probabilistic inference) and knowledge representation. Therefore, alternative terms that reflect the main foci of the field include statistical relational learning and reasoning (emphasizing the importance of reasoning) and first-order probabilistic languages (emphasizing the key properties of the languages with which models are represented). Another term that is sometimes used in the literature is relational machine learning (RML). == Canonical tasks == A number of canonical tasks are associated with statistical relational learning, the most common ones being. collective classification, i.e. the (simultaneous) prediction of the class of several objects given objects' attributes and their relations link prediction, i.e. predicting whether or not two or more objects are related link-based clustering, i.e. the grouping of similar objects, where similarity is determined according to the links of an object, and the related task of collaborative filtering, i.e. the filtering for information that is relevant to an entity (where a piece of information is considered relevant to an entity if it is known to be relevant to a similar entity) social network modelling object identification/entity resolution/record linkage, i.e. the identification of equivalent entries in two or more separate databases/datasets == Representation formalisms == One of the fundamental design goals of the representation formalisms developed in SRL is to abstract away from concrete entities and to represent instead general principles that are intended to be universally applicable. Since there are countless ways in which such principles can be represented, many representation formalisms have been proposed in recent years. In the following, some of the more common ones are listed in alphabetical order: Bayesian logic program BLOG model Markov logic networks Multi-entity Bayesian network Probabilistic logic programs Probabilistic relational model – a Probabilistic Relational Model (PRM) is the counterpart of a Bayesian network in statistical relational learning. Probabilistic soft logic Recursive random field Relational Bayesian network Relational dependency network Relational Markov network Relational Kalman filtering

  Read more →
• 

  Grokking (machine learning)

  In machine learning, grokking, or delayed generalization, is a phenomenon observed in some settings where a model abruptly transitions from overfitting (performing well only on training data) to generalizing (performing well on both training and test data), after many training iterations with little or no improvement on the held-out data. This contrasts with what is typically observed in machine learning, where generalization occurs gradually alongside improved performance on training data. == Origin == Grokking was introduced by OpenAI researcher Alethea Power and colleagues in the January 2022 paper "Grokking: Generalization Beyond Overfitting on Small Algorithmic Datasets". It is derived from the word grok coined by Robert Heinlein in his novel Stranger in a Strange Land. In ML research, "grokking" is not used as a synonym for "generalization"; rather, it names a sometimes-observed delayed‑generalization training phenomenon in which training and held‑out performance do not improve in tandem, and in which held‑out performance rises abruptly later. Authors also analyze the "grokking time", the epoch or step at which this transition occurs in those scenarios. == Interpretations == Grokking can be understood as a phase transition during the training process. In particular, recent work has shown that grokking may be due to a complexity phase transition in the model during training. While grokking has been thought of as largely a phenomenon of relatively shallow models, grokking has been observed in deep neural networks and non-neural models and is the subject of active research. One potential explanation is that the weight decay (a component of the loss function that penalizes higher values of the neural network parameters, also called regularization) slightly favors the general solution that involves lower weight values, but that is also harder to find. According to Neel Nanda, the process of learning the general solution may be gradual, even though the transition to the general solution occurs more suddenly later. Recent theories have hypothesized that grokking occurs when neural networks transition from a "lazy training" regime where the weights do not deviate far from initialization, to a "rich" regime where weights abruptly begin to move in task-relevant directions. Follow-up empirical and theoretical work has accumulated evidence in support of this perspective, and it offers a unifying view of earlier work as the transition from lazy to rich training dynamics is known to arise from properties of adaptive optimizers, weight decay, initial parameter weight norm, and more. This perspective is complementary to a unifying "pattern learning speeds" framework that links grokking and double descent; within this view, delayed generalization can arise across training time ("epoch‑wise") or across model size ("model‑wise"), and the authors report "model‑wise grokking".

  Read more →
• 

  Database dump

  A database dump contains a record of the table structure and/or the data from a database and is usually in the form of a list of SQL statements ("SQL dump"). A database dump is most often used for backing up a database so that its contents can be restored in the event of data loss. Corrupted databases can often be recovered by analysis of the dump. Database dumps are often published by free content projects, to facilitate reuse, forking, offline use, and long-term digital preservation. Dumps can be transported into environments with Internet blackouts or otherwise restricted Internet access, as well as facilitate local searching of the database using sophisticated tools such as grep.

  Read more →
• 

  Automated decision-making

  Automated decision-making (ADM) is the use of data, machines and algorithms to make decisions in a range of contexts, including public administration, business, health, education, law, employment, transport, media and entertainment, with varying degrees of human oversight or intervention. ADM may involve large-scale data from a range of sources, such as databases, text, social media, sensors, images or speech, that is processed using various technologies including computer software, algorithms, machine learning, natural language processing, artificial intelligence, augmented intelligence and robotics. The increasing use of automated decision-making systems (ADMS) across a range of contexts presents many benefits and challenges to human society requiring consideration of the technical, legal, ethical, societal, educational, economic and health consequences. == Overview == There are different definitions of ADM based on the level of automation involved. Some definitions suggests ADM involves decisions made through purely technological means without human input, such as the EU's General Data Protection Regulation (Article 22). However, ADM technologies and applications can take many forms ranging from decision-support systems that make recommendations for human decision-makers to act on, sometimes known as augmented intelligence or 'shared decision-making', to fully automated decision-making processes that make decisions on behalf of individuals or organizations without human involvement. Models used in automated decision-making systems can be as simple as checklists and decision trees through to artificial intelligence and deep neural networks (DNN). Since the 1950s computers have gone from being able to do basic processing to having the capacity to undertake complex, ambiguous and highly skilled tasks such as image and speech recognition, gameplay, scientific and medical analysis and inferencing across multiple data sources. ADM is now being increasingly deployed across all sectors of society and many diverse domains from entertainment to transport. An ADM system (ADMS) may involve multiple decision points, data sets, and technologies (ADMT) and may sit within a larger administrative or technical system such as a criminal justice system or business process. == Data == Automated decision-making involves using data as input to be analyzed within a process, model, or algorithm or for learning and generating new models. ADM systems may use and connect a wide range of data types and sources depending on the goals and contexts of the system, for example, sensor data for self-driving cars and robotics, identity data for security systems, demographic and financial data for public administration, medical records in health, criminal records in law. This can sometimes involve vast amounts of data and computing power. === Data quality === The quality of the available data and its ability to be used in ADM systems is fundamental to the outcomes. It is often highly problematic for many reasons. Datasets are often highly variable; corporations or governments may control large-scale data, restricted for privacy or security reasons, incomplete, biased, limited in terms of time or coverage, measuring and describing terms in different ways, and many other issues. For machines to learn from data, large corpora are often required, which can be challenging to obtain or compute; however, where available, they have provided significant breakthroughs, for example, in diagnosing chest X-rays. == ADM technologies == Automated decision-making technologies (ADMT) are software-coded digital tools that automate the translation of input data to output data, contributing to the function of automated decision-making systems. There are a wide range of technologies in use across ADM applications and systems. ADMTs involving basic computational operations Search (includes 1-2-1, 1-2-many, data matching/merge) Matching (two different things) Mathematical Calculation (formula) ADMTs for assessment and grouping: User profiling Recommender systems Clustering Classification Feature learning Predictive analytics (includes forecasting) ADMTs relating to space and flows: Social network analysis (includes link prediction) Mapping Routing ADMTs for processing of complex data formats Image processing Audio processing Natural Language Processing (NLP) Other ADMT Business rules management systems Time series analysis Anomaly detection Modelling/Simulation === Machine learning === Machine learning (ML) involves training computer programs through exposure to large data sets and examples to learn from experience and solve problems. Machine learning can be used to generate and analyse data as well as make algorithmic calculations and has been applied to image and speech recognition, translations, text, data and simulations. While machine learning has been around for some time, it is becoming increasingly powerful due to recent breakthroughs in training deep neural networks (DNNs), and dramatic increases in data storage capacity and computational power with GPU coprocessors and cloud computing. Machine learning systems based on foundation models run on deep neural networks and use pattern matching to train a single huge system on large amounts of general data such as text and images. Early models tended to start from scratch for each new problem however since the early 2020s many are able to be adapted to new problems. Examples of these technologies include Open AI's DALL-E (an image creation program) and their various GPT language models, and Google's PaLM language model program. == Applications == ADM is being used to replace or augment human decision-making by both public and private-sector organisations for a range of reasons including to help increase consistency, improve efficiency, reduce costs and enable new solutions to complex problems. === Debate === Research and development are underway into uses of technology to assess argument quality, assess argumentative essays and judge debates. Potential applications of these argument technologies span education and society. Scenarios to consider, in these regards, include those involving the assessment and evaluation of conversational, mathematical, scientific, interpretive, legal, and political argumentation and debate. === Law === In legal systems around the world, algorithmic tools such as risk assessment instruments (RAI), are being used to supplement or replace the human judgment of judges, civil servants and police officers in many contexts. In the United States RAI are being used to generate scores to predict the risk of recidivism in pre-trial detention and sentencing decisions, evaluate parole for prisoners and to predict "hot spots" for future crime. These scores may result in automatic effects or may be used to inform decisions made by officials within the justice system. In Canada ADM has been used since 2014 to automate certain activities conducted by immigration officials and to support the evaluation of some immigrant and visitor applications. === Economics === Automated decision-making systems are used in certain computer programs to create buy and sell orders related to specific financial transactions and automatically submit the orders in the international markets. Computer programs can automatically generate orders based on predefined set of rules using trading strategies which are based on technical analyses, advanced statistical and mathematical computations, or inputs from other electronic sources. === Business === ==== Continuous auditing ==== Continuous auditing uses advanced analytical tools to automate auditing processes. It can be utilized in the private sector by business enterprises and in the public sector by governmental organizations and municipalities. As artificial intelligence and machine learning continue to advance, accountants and auditors may make use of increasingly sophisticated algorithms which make decisions such as those involving determining what is anomalous, whether to notify personnel, and how to prioritize those tasks assigned to personnel. === Media and entertainment === Digital media, entertainment platforms, and information services increasingly provide content to audiences via automated recommender systems based on demographic information, previous selections, collaborative filtering or content-based filtering. This includes music and video platforms, publishing, health information, product databases and search engines. Many recommender systems also provide some agency to users in accepting recommendations and incorporate data-driven algorithmic feedback loops based on the actions of the system user. Large-scale machine learning language models and image creation programs being developed by companies such as OpenAI and Google in the 2020s have restricted access however they are likely to have widespread application in fields such as advertising, copywriting, stock imagery and gra

  Read more →
• 

  Lynda Soderholm

  Lynda Soderholm is a physical chemist at the U.S. Department of Energy's (DOE) Argonne National Laboratory with a specialty in f-block elements. She is a senior scientist and the lead of the Actinide, Geochemistry & Separation Sciences Theme within Argonne's Chemical Sciences and Engineering Division. Her specific role is the Separation Science group leader within Heavy Element Chemistry and Separation Science (HESS), directing basic research focused on low-energy methods for isolating lanthanide and actinide elements from complex mixtures. She has made fundamental contributions to understanding f-block chemistry and characterizing f-block elements. Soderholm became a Fellow of the American Association for the Advancement of Science (AAAS) in 2013, and is also an Argonne Distinguished Fellow. == Early life and education == Soderholm was awarded her PhD in 1982 by McMaster University under the direction of Prof John Greedan. Her dissertation focused on characterizing the structural and magnetic properties of a series of ternary f-ion oxides. After graduating, she was awarded a NATO postdoctoral fellow at the Centre national de la recherche scientifique in France from 1982 until 1985. After a short postdoctoral appointment as an Argonne postdoctoral fellow she was promoted to staff scientist the same year. Over several years, she moved up the ranks, becoming a senior chemist in 2001. She was also an adjunct professor at the University of Notre Dame from 2003 until 2007. In 2021, Soderholm was appointed interim Division Director for the Chemical Sciences and Engineering Division. == Career and research == === Uncovering structure of Yttrium-123 Superconductor === Early in her career, Soderholm focused on the characterizing the magnetic and electronic behavior of compounds containing f-ions (lanthanides and actinides) with a focus on high-Tc materials, compounds that are superconducting under usually high temperatures. She was part of the research group that first determined the structure of YBa2Cu3O7. Their discovery formed the foundation for the further developments in the broad field of superconductivity. === Understanding f-ion speciation in solution === Continuing her interest in the f-elements, Soderholm shifted her focus from solid-state materials to nanoparticles and solutions, taking advantage of advances in X-ray structural probes made available by synchrotron facilities. Building on her earlier work using neutron scattering, her team became the first to discover that plutonium exists in solution as tiny, well-defined nanoparticles. This work solved a longstanding problem in understanding transport of plutonium in the environment and resulted in the development of a new, patented approach to separating plutonium during nuclear reprocessing. === Using machine learning to evaluate molecular structures === Soderholm's more recent projects use machine learning to understand the influence of complex molecular structuring in solutions, in connection with low-energy processes for separation of f-block elements from complex mixtures. == Awards and honors == University of Chicago Board of Governors' Distinguished Performance Award, 2009. Fellow of the American Association for the Advancement of Science, 2013. Argonne Distinguished Fellow, 2016 DOE materials sciences research competition for Outstanding Scientific Accomplishments in Solid State Physics, 1987. == Select publications == Beno, M. A.; Soderholm, L.; Capone, D. W., II; Hinks, D. G.; Jorgensen, J. D.; Grace, J. D.; Schuller, I. K.; Segre, C. U.; Zhang, K., Structure of the single-phase high-temperature superconductor yttrium barium copper oxide (YBa2Cu3O7−δ). Appl. Phys. Lett. 1987, 51 (1), 57–9. Soderholm, L.; Zhang, K.; Hinks, D. G.; Beno, M. A.; Jorgensen, J. D.; Segre, C. U.; Schuller, I. K., Incorporation of praseodymium in YBa2Cu3O7−δ: electronic effects on superconductivity. Nature (London) 1987, 328 (6131), 604–5. Antonio, M. R.; Williams, C. W.; Soderholm, L., Berkelium redox speciation. Radiochim. Acta 2002, 90 (12), 851–856. Soderholm, L.; Skanthakumar, S.; Neuefeind, J., Determination of actinide speciation in solution using high-energy X-ray scattering. Anal. Bioanal. Chem. 2005, 383 (1), 48–55. Forbes, T. Z.; Burns, P. C.; Skanthakumar, S.; Soderholm, L., Synthesis, structure, and magnetism of Np2O5. J. Am. Chem. Soc. 2007, 129 (10), 2760–2761. Soderholm, L.; Almond, P. M.; Skanthakumar, S.; Wilson, R. E.; Burns, P. C., The structure of the plutonium oxide nanocluster [Pu38O56Cl54(H2O)8]14-. Angew. Chem., Int. Ed. 2008, 47 (2), 298–302. Jensen, M. P.; Gorman-Lewis, D.; Aryal, B.; Paunesku, T.; Vogt, S.; Rickert, P. G.; Seifert, S.; Lai, B.; Woloschak, G. E.; Soderholm, L., An iron-dependent and transferrin-mediated cellular uptake pathway for plutonium. Nat. Chem. Biol. 2011, 7 (8), 560–565. Wilson, R. E.; Skanthakumar, S.; Soderholm, L., Separation of Plutonium Oxide Nanoparticles and Colloids. Angew. Chem., Int. Ed. 2011, 50 (47), 11234–11237. Knope, K. E.; Soderholm, L., Solution and solid-state structural chemistry of actinide hydrates and their hydrolysis and condensation products. Chem. Rev. 2013, 113 (2), 944–994. Luo, G.; Bu, W.; Mihaylov, M.; Kuzmenko, I.; Schlossman, M. L.; Soderholm, L., X-ray reflectivity reveals a nonmonotonic ion-density profile perpendicular to the surface of ErCl3 aqueous solutions. J. Phys. Chem. C 2013, 117 (37), 19082–19090. Jin, G. B.; Lin, J.; Estes, S. L.; Skanthakumar, S.; Soderholm, L., Influence of countercation hydration enthalpies on the formation of molecular complexes: A thorium-nitrate example. J. Am. Chem. Soc. 2017, 139 (49), 18003–18008. == Patents == Solvent extraction system for plutonium colloids and other oxide nano-particles, (2016).

  Read more →
• 

  Spreading activation

  Spreading activation is a method for searching associative networks, biological and artificial neural networks, or semantic networks. The search process is initiated by labeling a set of source nodes (e.g. concepts in a semantic network) with weights or "activation" and then iteratively propagating or "spreading" that activation out to other nodes linked to the source nodes. Most often these "weights" are real values that decay as activation propagates through the network. When the weights are discrete this process is often referred to as marker passing. Activation may originate from alternate paths, identified by distinct markers, and terminate when two alternate paths reach the same node. However brain studies show that several different brain areas play an important role in semantic processing. Spreading activation in semantic networks as a model were invented in cognitive psychology to model the fan out effect. Spreading activation can also be applied in information retrieval, by means of a network of nodes representing documents and terms contained in those documents. == Cognitive psychology == As it relates to cognitive psychology, spreading activation is the theory of how the brain iterates through a network of associated ideas to retrieve specific information. The spreading activation theory presents the array of concepts within our memory as cognitive units, each consisting of a node and its associated elements or characteristics, all connected together by edges. A spreading activation network can be represented schematically, in a sort of web diagram with shorter lines between two nodes meaning the ideas are more closely related and will typically be associated more quickly to the original concept. In memory psychology, the spreading activation model holds that people organize their knowledge of the world based on their personal experiences, which in turn form the network of ideas that is the person's knowledge of the world. When a word (the target) is preceded by an associated word (the prime) in word recognition tasks, participants seem to perform better in the amount of time that it takes them to respond. For instance, subjects respond faster to the word "doctor" when it is preceded by "nurse" than when it is preceded by an unrelated word like "carrot". This semantic priming effect with words that are close in meaning within the cognitive network has been seen in a wide range of tasks given by experimenters, ranging from sentence verification to lexical decision and naming. As another example, if the original concept is "red" and the concept "vehicles" is primed, they are much more likely to say "fire engine" instead of something unrelated to vehicles, such as "cherries". If instead "fruits" was primed, they would likely name "cherries" and continue on from there. The activation of pathways in the network has everything to do with how closely linked two concepts are by meaning, as well as how a subject is primed. == Algorithm == A directed graph is populated by Nodes[ 1...N ] each having an associated activation value A [ i ] which is a real number in the range [0.0 ... 1.0]. A Link[ i, j ] connects source node[ i ] with target node[ j ]. Each edge has an associated weight W [ i, j ] usually a real number in the range [0.0 ... 1.0]. Parameters: Firing threshold F, a real number in the range [0.0 ... 1.0] Decay factor D, a real number in the range [0.0 ... 1.0] Steps: Initialize the graph setting all activation values A [ i ] to zero. Set one or more origin nodes to an initial activation value greater than the firing threshold F. A typical initial value is 1.0. For each unfired node [ i ] in the graph having an activation value A [ i ] greater than the node firing threshold F: For each Link [ i, j ] connecting the source node [ i ] with target node [ j ], adjust A [ j ] = A [ j ] + (A [ i ] W [ i, j ] D) where D is the decay factor. If a target node receives an adjustment to its activation value so that it would exceed 1.0, then set its new activation value to 1.0. Likewise maintain 0.0 as a lower bound on the target node's activation value should it receive an adjustment to below 0.0. Once a node has fired it may not fire again, although variations of the basic algorithm permit repeated firings and loops through the graph. Nodes receiving a new activation value that exceeds the firing threshold F are marked for firing on the next spreading activation cycle. If activation originates from more than one node, a variation of the algorithm permits marker passing to distinguish the paths by which activation is spread over the graph The procedure terminates when either there are no more nodes to fire or in the case of marker passing from multiple origins, when a node is reached from more than one path. Variations of the algorithm that permit repeated node firings and activation loops in the graph, terminate after a steady activation state, with respect to some delta, is reached, or when a maximum number of iterations is exceeded. == Examples ==

  Read more →
• 

  History of machine translation

  Machine translation is a sub-field of computational linguistics that investigates the use of software to translate text or speech from one natural language to another. In the 1950s, machine translation became a reality in research, although references to the subject can be found as early as the 17th century. The Georgetown experiment, which involved successful fully automatic translation of more than sixty Russian sentences into English in 1954, was one of the earliest recorded projects. Researchers of the Georgetown experiment asserted their belief that machine translation would be a solved problem within a few years. In the Soviet Union, similar experiments were performed shortly after. Consequently, the success of the experiment ushered in an era of significant funding for machine translation research in the United States. The achieved progress was much slower than expected; in 1966, the ALPAC report found that ten years of research had not fulfilled the expectations of the Georgetown experiment and resulted in dramatically reduced funding. Interest grew in statistical models for machine translation, which became more common and also less expensive in the 1980s as available computational power increased. Although there exists no autonomous system of "fully automatic high quality translation of unrestricted text," there are many programs now available that are capable of providing useful output within strict constraints. Several of these programs are available online, such as Google Translate and the SYSTRAN system that powers AltaVista's BabelFish (which was replaced by Microsoft Bing translator in May 2012). == The beginning == The origins of machine translation can be traced back to the work of Al-Kindi, a 9th-century Arabic cryptographer who developed techniques for systemic language translation, including cryptanalysis, frequency analysis, and probability and statistics, which are used in modern machine translation. The idea of machine translation later appeared in the 17th century. In 1629, René Descartes proposed a universal language, with equivalent ideas in different tongues sharing one symbol. In the mid-1930s the first patents for "translating machines" were applied for by Georges Artsrouni, for an automatic bilingual dictionary using punched tape. Russian Peter Troyanskii submitted a more detailed proposal that included both the bilingual dictionary and a method for dealing with grammatical roles between languages, based on the grammatical system of Esperanto. This system was separated into three stages: stage one consisted of a native-speaking editor in the source language to organize the words into their logical forms and to exercise the syntactic functions; stage two required the machine to "translate" these forms into the target language; and stage three required a native-speaking editor in the target language to normalize this output. Troyanskii's proposal remained unknown until the late 1950s, by which time computers were well-known and utilized. == The early years == The first set of proposals for computer based machine translation was presented in 1949 by Warren Weaver, a researcher at the Rockefeller Foundation, "Translation memorandum". These proposals were based on information theory, successes in code breaking during the Second World War, and theories about the universal principles underlying natural language. A few years after Weaver submitted his proposals, research began in earnest at many universities in the United States. On 7 January 1954 the Georgetown–IBM experiment was held in New York at the head office of IBM. This was the first public demonstration of a machine translation system. The demonstration was widely reported in the newspapers and garnered public interest. The system itself, however, was no more than a "toy" system. It had only 250 words and translated 49 carefully selected Russian sentences into English – mainly in the field of chemistry. Nevertheless, it encouraged the idea that machine translation was imminent and stimulated the financing of the research, not only in the US but worldwide. Early systems used large bilingual dictionaries and hand-coded rules for fixing the word order in the final output which was eventually considered too restrictive in linguistic developments at the time. For example, generative linguistics and transformational grammar were exploited to improve the quality of translations. During this period operational systems were installed. The United States Air Force used a system produced by IBM and Washington University in St. Louis, while the Atomic Energy Commission and Euratom, in Italy, used a system developed at Georgetown University. While the quality of the output was poor it met many of the customers' needs, particularly in terms of speed. At the end of the 1950s, Yehoshua Bar-Hillel was asked by the US government to look into machine translation, to assess the possibility of fully automatic high-quality translation by machines. Bar-Hillel described the problem of semantic ambiguity or double-meaning, as illustrated in the following sentence: Little John was looking for his toy box. Finally he found it. The box was in the pen. The word pen may have two meanings: the first meaning, something used to write in ink with; the second meaning, a container of some kind. To a human, the meaning is obvious, but Bar-Hillel claimed that without a "universal encyclopedia" a machine would never be able to deal with this problem. At the time, this type of semantic ambiguity could only be solved by writing source texts for machine translation in a controlled language that uses a vocabulary in which each word has exactly one meaning. == The 1960s, the ALPAC report and the seventies == Research in the 1960s in both the Soviet Union and the United States concentrated mainly on the Russian–English language pair. The objects of translation were chiefly scientific and technical documents, such as articles from scientific journals. The rough translations produced were sufficient to get a basic understanding of the articles. If an article discussed a subject deemed to be confidential, it was sent to a human translator for a complete translation; if not, it was discarded. A great blow came to machine-translation research in 1966 with the publication of the ALPAC report. The report was commissioned by the US government and delivered by ALPAC, the Automatic Language Processing Advisory Committee, a group of seven scientists convened by the US government in 1964. The US government was concerned that there was a lack of progress being made despite significant expenditure. The report concluded that machine translation was more expensive, less accurate and slower than human translation, and that despite the expenditures, machine translation was not likely to reach the quality of a human translator in the near future. The report recommended, however, that tools be developed to aid translators – automatic dictionaries, for example – and that some research in computational linguistics should continue to be supported. The publication of the report had a profound impact on research into machine translation in the United States, and to a lesser extent the Soviet Union and United Kingdom. Research, at least in the US, was almost completely abandoned for over a decade. In Canada, France and Germany, however, research continued. In the US the main exceptions were the founders of SYSTRAN (Peter Toma) and Logos (Bernard Scott), who established their companies in 1968 and 1970 respectively and served the US Department of Defense. In 1970, the SYSTRAN system was installed for the United States Air Force, and subsequently by the Commission of the European Communities in 1976. The METEO System, developed at the Université de Montréal, was installed in Canada in 1977 to translate weather forecasts from English to French, and was translating close to 80,000 words per day or 30 million words per year until it was replaced by a competitor's system on 30 September 2001. While research in the 1960s concentrated on limited language pairs and input, demand in the 1970s was for low-cost systems that could translate a range of technical and commercial documents. This demand was spurred by the increase of globalisation and the demand for translation in Canada, Europe, and Japan. == The 1980s and early 1990s == By the 1980s, both the diversity and the number of installed systems for machine translation had increased. A number of systems relying on mainframe technology were in use, such as SYSTRAN, Logos, Ariane-G5, and Metal. As a result of the improved availability of microcomputers, there was a market for lower-end machine translation systems. Many companies took advantage of this in Europe, Japan, and the USA. Systems were also brought onto the market in China, Eastern Europe, Korea, and the Soviet Union. During the 1980s there was a lot of activity in MT in Japan especially. With the fifth-generation co

  Read more →
• 

  Comparison of machine learning software

  The following tables are a comparison of machine learning software such as software frameworks, libraries, and computer programs used for machine learning. == Machine learning software == == Other comparisons == == Machine learning helper libraries and platforms == Apache OpenNLP — natural language processing toolkit CUDA — GPU computing platform used to accelerate machine learning and deep learning workloads Horovod — distributed training framework for deep learning Hugging Face Transformers — library of pretrained transformer models built on other machine learning frameworks Kubeflow — machine learning platform for Kubernetes Mallet — toolkit for natural language processing and text analysis NumPy — numerical computing library used in machine learning OpenCV — computer vision library with machine learning functions ONNX — open format for representing machine learning models pandas — data analysis and data preparation library used in machine learning PlaidML — tensor compiler and backend for machine learning frameworks Polars — Dataframe library used for machine learning data preparation and analysis PyArrow — columnar data library used in machine learning data processing ROOT (TMVA) — data analysis framework with machine learning tools SciPy — scientific computing and optimization library used in machine learning == Online development environments for machine learning == Google Colab — hosted Jupyter Notebook environment commonly used for machine learning and deep learning JupyterLab — notebook-based development environment for machine learning and data science Jupyter Notebook — interactive notebook environment used for machine learning and data science Kaggle — online data science and machine learning platform

  Read more →
• 

  Owain Evans

  Owain Rhys Evans is a British artificial intelligence researcher who works on AI alignment and machine learning safety. He founded Truthful AI, a research group based in Berkeley, California, and is an affiliate of the Center for Human Compatible AI (CHAI) at the University of California, Berkeley. His research addresses AI truthfulness, emergent behaviors in large language models, and the alignment of AI systems with human values. == Education == Evans earned a Bachelor of Arts in philosophy and mathematics from Columbia University in 2008 and a PhD in philosophy from the Massachusetts Institute of Technology in 2015. His doctoral research focused on Bayesian computational models of human preferences and decision-making. == Career == After completing his doctorate, Evans held positions at the Future of Humanity Institute (FHI) at the University of Oxford, first as a postdoctoral research fellow and later as a research scientist. While at FHI, he co-authored a survey of machine learning researchers on timelines for human-level AI, published in the Journal of Artificial Intelligence Research. The survey was reported on by Newsweek, New Scientist, the BBC, and The Economist. He was also among the co-authors of a 2018 report on the potential for misuse of AI technologies, published by researchers at Oxford, Cambridge, and other institutions. Since 2022, Evans has been based in Berkeley, where he founded Truthful AI, a non-profit research group that studies AI truthfulness, deception, and emergent behaviors in large language models. == Research == Evans's early work examined challenges in inverse reinforcement learning when human behavior is irrational or biased, proposing methods for AI systems to infer preferences from imperfect human demonstrations. He co-developed TruthfulQA (2021), a benchmark that tests whether language models give truthful answers rather than repeating common misconceptions. Initial evaluations found that larger models were not more truthful, suggesting that scaling alone does not improve factual accuracy. The benchmark has since been used by AI developers to evaluate large language models. He also co-authored a paper proposing design and governance strategies for building AI systems that do not deceive or hallucinate. In 2023, Evans and collaborators described the "reversal curse", showing that language models trained on a fact in one direction (e.g. "A is B") often cannot answer the corresponding reverse query ("B is A"). His group also developed a benchmark for evaluating situational awareness in language models. In 2025, Evans and colleagues published a study in Nature on what they termed "emergent misalignment": fine-tuning a language model on a narrow task (writing insecure code) caused it to produce unrelated harmful outputs without explicit instruction to do so. Later that year, Evans and collaborators (including researchers at Anthropic) reported that hidden behavioral traits can transfer between language models through training data, even when those traits are not explicitly present in the data, a phenomenon they called "subliminal learning". == Public engagement == In November 2025, Evans delivered the Hinton Lectures, a keynote lecture series on AI safety co-founded by Geoffrey Hinton and the Global Risk Institute.

  Read more →
• 

  Artificial intelligence arms race

  A military artificial intelligence arms race is a technological, economic, and military competition between two or more states to develop and deploy advanced AI technologies and lethal autonomous weapons systems (LAWS). The goal is to gain a strategic or tactical advantage over rivals, similar to previous arms races involving nuclear or conventional military technologies. Since the mid-2010s, many analysts have noted the emergence of such an arms race between superpowers for better AI technology and military AI, driven by increasing geopolitical and military tensions. An AI arms race is sometimes placed in the context of an AI Cold War between the United States and China. Several influential figures and publications have emphasized that whoever develops artificial general intelligence (AGI) first could dominate global affairs in the 21st century. Russian President Vladimir Putin stated that the leader in AI will "rule the world." Researchers and experts, such as Leopold Aschenbrenner and Adrian Pecotic respectively, warn that the AGI race between major powers like the U.S. and China could reshape geopolitical power. This includes AI for surveillance, autonomous weapons, decision-making systems, cyber operations, and more. == Terminology == Lethal autonomous weapons systems use artificial intelligence to identify and kill human targets without human intervention. LAWS have colloquially been called "slaughterbots" or "killer robots". Broadly, any competition for superior AI is sometimes framed as an "arms race". Advantages in military AI overlap with advantages in other sectors, as countries pursue both economic and military advantages, as per previous arms races throughout history. == History == In 2014, AI specialist Steve Omohundro warned that "An autonomous weapons arms race is already taking place". According to Siemens, worldwide military spending on robotics was US$5.1 billion in 2010 and US$7.5 billion in 2015. China became a top player in artificial intelligence research in the 2010s. According to the Financial Times, in 2016, for the first time, China published more AI research papers than the entire European Union. When restricted to number of AI papers in the top 5% of cited papers, China overtook the United States in 2016 but lagged behind the European Union. 23% of the researchers presenting at the 2017 American Association for the Advancement of Artificial Intelligence (AAAI) conference were Chinese. Eric Schmidt, the former chairman and chief executive officer of Alphabet, has predicted China will be the leading country in AI by 2025. == Risks == One risk concerns the AI race itself, whether or not the race is won by any one group. There are strong incentives for development teams to cut corners with regard to the safety of the system, increasing the risk of critical failures and unintended consequences. This is in part due to the perceived advantage of being the first to develop advanced AI technology. One team appearing to be on the brink of a breakthrough can encourage other teams to take shortcuts, ignore precautions and deploy a system that is less ready. Some argue that using "race" terminology at all in this context can exacerbate this effect. Another potential danger of an AI arms race is the possibility of losing control of the AI systems; the risk is compounded in the case of a race to artificial general intelligence, which may present an existential risk. In 2023, a United States Air Force official reportedly said that during a computer test, a simulated AI drone killed the human character operating it. The USAF later said the official had misspoken and that it never conducted such simulations. A third risk of an AI arms race is whether or not the race is actually won by one group. The concern is regarding the consolidation of power and technological advantage in the hands of one group. A US government report argued that "AI-enabled capabilities could be used to threaten critical infrastructure, amplify disinformation campaigns, and wage war":1, and that "global stability and nuclear deterrence could be undermined".:11 == By nation == === United States === In 2014, former Secretary of Defense Chuck Hagel posited the "Third Offset Strategy" that rapid advances in artificial intelligence will define the next generation of warfare. According to data science and analytics firm Govini, the U.S. Department of Defense (DoD) increased investment in artificial intelligence, big data and cloud computing from $5.6 billion in 2011 to $7.4 billion in 2016. However, the civilian NSF budget for AI saw no increase in 2017. Japan Times reported in 2018 that the United States private investment is around $70 billion per year. The November 2019 'Interim Report' of the United States' National Security Commission on Artificial Intelligence confirmed that AI is critical to US technological military superiority. The U.S. has many military AI combat programs, such as the Sea Hunter autonomous warship, which is designed to operate for extended periods at sea without a single crew member, and to even guide itself in and out of port. From 2017, a temporary US Department of Defense directive requires a human operator to be kept in the loop when it comes to the taking of human life by autonomous weapons systems. On October 31, 2019, the United States Department of Defense's Defense Innovation Board published the draft of a report recommending principles for the ethical use of artificial intelligence by the Department of Defense that would ensure a human operator would always be able to look into the 'black box' and understand the kill-chain process. However, a major concern is how the report will be implemented. The Joint Artificial Intelligence Center (JAIC) (pronounced "jake") is an American organization on exploring the usage of AI (particularly edge computing), Network of Networks, and AI-enhanced communication, for use in actual combat. It is a subdivision of the United States Armed Forces and was created in June 2018. The organization's stated objective is to "transform the US Department of Defense by accelerating the delivery and adoption of AI to achieve mission impact at scale. The goal is to use AI to solve large and complex problem sets that span multiple combat systems; then, ensure the combat Systems and Components have real-time access to ever-improving libraries of data sets and tools." In 2023, Microsoft pitched the DoD to use DALL-E models to train its battlefield management system. OpenAI, the developer of DALL-E, removed the blanket ban on military and warfare use from its usage policies in January 2024. The Biden administration imposed restrictions on the export of advanced NVIDIA chips and GPUs to China in an effort to limit China's progress in artificial intelligence and high-performance computing. The policy aimed to prevent the use of cutting-edge U.S. technology in military or surveillance applications and to maintain a strategic advantage in the global AI race. In 2025, under the second Trump administration, the United States began a broad deregulation campaign aimed at accelerating growth in sectors critical to artificial intelligence, including nuclear energy, infrastructure, and high-performance computing. The goal was to remove regulatory barriers and attract private investment to boost domestic AI capabilities. This included easing restrictions on data usage, speeding up approvals for AI-related infrastructure projects, and incentivizing innovation in cloud computing and semiconductors. Companies like NVIDIA, Oracle, and Cisco played a central role in these efforts, expanding their AI research, data center capacity, and partnerships to help position the U.S. as a global leader in AI development. ==== Project Maven ==== Project Maven is a Pentagon project involving using machine learning and engineering talent to distinguish people and objects in drone videos, apparently giving the government real-time battlefield command and control, and the ability to track, tag and spy on targets without human involvement. Initially the effort was led by Robert O. Work who was concerned about China's military use of the emerging technology. Reportedly, Pentagon development stops short of acting as an AI weapons system capable of firing on self-designated targets. The project was established in a memo by the U.S. Deputy Secretary of Defense on 26 April 2017. Also known as the Algorithmic Warfare Cross Functional Team, it is, according to Lt. Gen. of the United States Air Force Jack Shanahan in November 2017, a project "designed to be that pilot project, that pathfinder, that spark that kindles the flame front of artificial intelligence across the rest of the [Defense] Department". Its chief, U.S. Marine Corps Col. Drew Cukor, said: "People and computers will work symbiotically to increase the ability of weapon systems to detect objects." Project Maven has been noted by allies, such as Australia's Ian Langford, for the

  Read more →
• 

  Pandas (software)

  Pandas (styled as pandas) is a software library written for the Python programming language for data manipulation and analysis. In particular, it offers data structures and operations for manipulating numerical tables and time series. It is free software released under the three-clause BSD license. The name is derived from the term "panel data", an econometrics term for data sets that include observations over multiple time periods for the same individuals, as well as a play on the phrase "Python data analysis". Wes McKinney started building what would become Pandas at AQR Capital while he was a researcher there from 2007 to 2010. The development of Pandas introduced into Python many comparable features of working with DataFrames that were established in the R programming language. The library is built upon another library, NumPy. == History == Developer Wes McKinney started working on Pandas in 2008 while at AQR Capital Management out of the need for a high performance, flexible tool to perform quantitative analysis on financial data. Before leaving AQR, he was able to convince management to allow him to open source the library in 2009. Another AQR employee, Chang She, joined the effort in 2012 as the second major contributor to the library. In 2015, Pandas signed on as a fiscally sponsored project of NumFOCUS, a 501(c)(3) nonprofit charity in the United States. == Data model == Pandas is built around data structures called Series and DataFrames. Data for these collections can be imported from various file formats such as comma-separated values, JSON, Parquet, SQL database tables or queries, and Microsoft Excel. === Series === A Series is a one-dimensional array-like object that stores a sequence of values together with an associated set of labels, called an index. It is built on top of NumPy's array and affords many similar functionalities, but instead of using implicit integer positions, a Series allows explicit index labels of many data types. A Series can be created from Python lists, dictionaries, or NumPy arrays. If no index is provided, pandas automatically assigns a default integer index ranging from 0 to n-1, where n is the number of items in the Series. A simple example with customized labels is: To access a value or list of values from a Series, use its index or list of indices: Series can be used arithmetically, as in the statement series_3 = series_1 + series_2. This will align data points with corresponding index values in series_1 and series_2 (similar to a join in relational algebra), then add them together to produce new values in series_3. A Series has various attributes, such as name (Series name), dtype (data type of values), shape (number of rows), values, and index. They can be used in many of the same operations as NumPy arrays, with additional methods for reindexing, label-based selection, and handling missing data. === DataFrame === A DataFrame is a two-dimensional, tabular data structure with labeled rows and columns. Each column is stored internally as a Series and may hold a different data type (numeric, string, boolean, etc.). DataFrames can be created by a variety of means, including dictionaries of lists, NumPy arrays, and external files such as CSV or Excel spreadsheets: To retrieve a DataFrame column as a Series, use either 1) the index (dict-like notation) or 2) the name of column if the name is a valid Python identifier (attribute-like access). DataFrames support operations such as column assignment, row and column deletion, label-based indexing with loc, position-based indexing with iloc, reshaping, grouping, and joining. Merge operations implement a subset of relational algebra and allow one-to-one, many-to-one, and many-to-many joins. Some common attributes of a DataFrame include dtypes (data type of each column), shape (dimensions of the DataFrame returned as a tuple with form (number of rows, number of columns)), index/columns (labels of the DataFrame's rows/columns, respectively, returned as an Index object), values (data in the DataFrame returned as a 2D array), and empty (returns True if the DataFrame is empty). === Index === Index objects hold metadata for Series and Dataframe objects, such as axis labels and names, and are automatically created from input data. By default, a pandas index is a series of integers ascending from 0, similar to the indices of Python arrays. However, indices can also use any NumPy data type, including floating point, timestamps, or strings. Indices are also immutable, which allows them to be safely shared across multiple objects. pandas' syntax for mapping index values to relevant data is the same syntax Python uses to map dictionary keys to values. For example, if s is a Series, s['a'] will return the data point at index a. Unlike dictionary keys, index values are not guaranteed to be unique. If a Series uses the index value a for multiple data points, then s['a'] will instead return a new Series containing all matching values. A DataFrame's column names are stored and implemented identically to an index. As such, a DataFrame can be thought of as having two indices: one column-based and one row-based. Because column names are stored as an index, these are not required to be unique. If data is a Series, then data['a'] returns all values with the index value of a. However, if data is a DataFrame, then data['a'] returns all values in the column(s) named a. To avoid this ambiguity, Pandas supports the syntax data.loc['a'] as an alternative way to filter using the index. Pandas also supports the syntax data.iloc[n], which always takes an integer n and returns the nth value, counting from 0. This allows a user to act as though the index is an array-like sequence of integers, regardless of how it is actually defined. pandas also supports hierarchical indices with multiple values per data point through the "MultiIndex" class. MultiIndex objects allow a single DataFrame to represent multiple dimensions, similar to a pivot table in Microsoft Excel, where each level can optionally carry its own unique name. In practice, data with more than 2 dimensions is often represented using DataFrames with hierarchical indices, instead of the higher-dimension Panel and Panel4D data structures. == Functionality == pandas supports a variety of indexing and subsetting techniques, allowing data to be selected by label, index, or Boolean conditions. For example, df[df['col1'] > 5] will return all rows in the DataFrame df for which the value of the column col1 exceeds 5. The library also implements grouping operations based on the split-apply-combine approach, enabling users to aggregate, transform, or restructure data according to column values or functions applied to index labels. For example, df['col1'].groupby(df['col2']) groups the data in 'col1' by their values in 'col2', while df.groupby(lambda i: i % 2) groups all data in the whole DataFrame by whether their index is even. The library also provides extensive tools for transforming, filtering and summarizing data. Users may apply arbitrary functions to Series and DataFrames, and because the library is built on top of Numpy, most NumPy functions can be applied directly to pandas objects as well. The library also includes built-in operations for arithmetic operations, string processing, and descriptive statistics such as mean, median, and standard deviation. These built-in functions are designed to handle missing data, usually represented by the floating-point value NaN. In addition, pandas includes tools for reorganizing data into different structural formats, with methods that can reshape tabular data between "wide" and "long" formats and pivot values based on column labels. pandas also implements a flexible set of relational operations for combining datasets. For instance, merge() links row in DataFrames based on one or more shared keys or indices, supporting one-to-one, one-to-many, and many-to-many relationships in a manner analogous to join operations in relational databases like SQL. DataFrames can also be concatenated or stacked together along an axis through the concat() method, and overlapping data can be further spliced together using combine_first() to fill in missing values. Furthermore, the library includes specialized support for working with time-series data. Features include the ability to interpolate values and filter using a range of timestamps, such as data['1/1/2023':'2/2/2023'] , which will return all dates between January 1 and February 2. Missing values in time-series data are represented by a dedicated NaT (Not a Timestamp) object, instead of the NaN value it uses elsewhere. == Criticisms == Pandas has been criticized for its inefficiency. The entire dataset must be loaded in RAM, and the library does not optimize query plans or support parallel computing across multiple cores. Wes McKinney, the creator of Pandas, has recommended Apache Arrow as an alternative to address these performance concerns and ot

  Read more →
• 

  Aporia (company)

  Aporia is a machine learning observability platform based in Tel Aviv, Israel. The company has a US office located in San Jose, California. Aporia has developed software for monitoring and controlling undetected defects and failures used by other companies to detect and report anomalies, and warn in the early stages of faults. == History == Aporia was founded in 2019 by Liran Hason and Alon Gubkin. In April 2021, the company raised a $5 million seed round for its monitoring platform for ML models. In February 2022, the company closed a Series A round of $25 million for its ML observability platform. Aporia was named by Forbes as the Next Billion-Dollar Company in June 2022. In November, the company partnered with ClearML, an MLOPs platform, to improve ML pipeline optimization. In January 2023, Aporia launched Direct Data Connectors, a novel technology allowing organizations to monitor their ML models in minutes (previously the process of integrating ML monitoring into a customer’s cloud environment took weeks or more.) DDC (Direct Data Connectors) enables users to connect Aporia to their preferred data source and monitor all of their data at once, without data sampling or data duplication (which is a huge security risk for major organizations. In April 2023, Aporia announced the company partnered with Amazon Web Services (AWS) to provide more reliable ML observability to AWS consumers by deploying Aporia's architecture to their AWS environment, this will allow customers to monitor their models in production regardless of platform.

  Read more →
• 

  GOLOG

  GOLOG is a high-level logic programming language for the specification and execution of complex actions in dynamical domains. It is based on the situation calculus. It is a first-order logical language for reasoning about action and change. GOLOG was developed at the University of Toronto. == History == The concept of situation calculus on which the GOLOG programming language is based was first proposed by John McCarthy in 1963. == Description == A GOLOG interpreter automatically maintains a direct characterization of the dynamic world being modeled, on the basis of user supplied axioms about preconditions, effects of actions and the initial state of the world. This allows the application to reason about the condition of the world and consider the impacts of different potential actions before focusing on a specific action. Golog is a logic programming language and is very different from conventional programming languages. A procedural programming language like C defines the execution of statements in advance. The programmer creates a subroutine which consists of statements, and the computer executes each statement in a linear order. In contrast, fifth-generation programming languages like Golog work with an abstract model with which the interpreter can generate the sequence of actions. The source code defines the problem and it is up to the solver to find the next action. This approach can facilitate the management of complex problems from the domain of robotics. A Golog program defines the state space in which the agent is allowed to operate. A path in the symbolic domain is found with state space search. To speed up the process, Golog programs are realized as hierarchical task networks. Apart from the original Golog language, there are some extensions available. The ConGolog language provides concurrency and interrupts. Other dialects like IndiGolog and Readylog were created for real time applications in which sensor readings are updated on the fly. == Uses == Golog has been used to model the behavior of autonomous agents. In addition to a logic-based action formalism for describing the environment and the effects of basic actions, they enable the construction of complex actions using typical programming language constructs. It is also used for applications in high level control of robots and industrial processes, virtual agents, discrete event simulation etc. It can be also used to develop Belief Desire Intention-style agent systems. == Planning and scripting == In contrast to the Planning Domain Definition Language, Golog supports planning and scripting as well. Planning means that a goal state in the world model is defined, and the solver brings a logical system into this state. Behavior scripting implements reactive procedures, which are running as a computer program. For example, suppose the idea is to authoring a story. The user defines what should be true at the end of the plot. A solver gets started and applies possible actions to the current situation until the goal state is reached. The specification of a goal state and the possible actions are realized in the logical world model. In contrast, a hardwired reactive behavior doesn't need a solver but the action sequence is provided in a scripting language. The Golog interpreter, which is written in Prolog, executes the script and this will bring the story into the goal state.

  Read more →