AI App Orange Logo — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.
Yap Speech Cloud was a multimodal speech recognition system developed by American technology company Yap Inc. It offered a fully cloud-based speech-to-text transcription platform that was used by customers such as Microsoft. The Company was a contestant at the inaugural TechCrunch conference and was subsequently acquired by Amazon in September 2011 to help develop products such as Alexa Voice Service, Echo, and Fire TV.
Read more →
An undeniable signature is a digital signature scheme which allows the signer to be selective to whom they allow to verify signatures. The scheme adds explicit signature repudiation, preventing a signer later refusing to verify a signature by omission; a situation that would devalue the signature in the eyes of the verifier. It was invented by David Chaum and Hans van Antwerpen in 1989. == Overview == In this scheme, a signer possessing a private key can publish a signature of a message. However, the signature reveals nothing to a recipient/verifier of the message and signature without taking part in either of two interactive protocols: Confirmation protocol, which confirms that a candidate is a valid signature of the message issued by the signer, identified by the public key. Disavowal protocol, which confirms that a candidate is not a valid signature of the message issued by the signer. The motivation for the scheme is to allow the signer to choose to whom signatures are verified. However, that the signer might claim the signature is invalid at any later point, by refusing to take part in verification, would devalue signatures to verifiers. The disavowal protocol distinguishes these cases removing the signer's plausible deniability. It is important that the confirmation and disavowal exchanges are not transferable. They achieve this by having the property of zero-knowledge; both parties can create transcripts of both confirmation and disavowal that are indistinguishable, to a third-party, of correct exchanges. The designated verifier signature scheme improves upon deniable signatures by allowing, for each signature, the interactive portion of the scheme to be offloaded onto another party, a designated verifier, reducing the burden on the signer. == Zero-knowledge protocol == The following protocol was suggested by David Chaum. A group, G, is chosen in which the discrete logarithm problem is intractable, and all operation in the scheme take place in this group. Commonly, this will be the finite cyclic group of order p contained in Z/nZ, with p being a large prime number; this group is equipped with the group operation of integer multiplication modulo n. An arbitrary primitive element (or generator), g, of G is chosen; computed powers of g then combine obeying fixed axioms. Alice generates a key pair, randomly chooses a private key, x, and then derives and publishes the public key, y = gx. === Message signing === Alice signs the message, m, by computing and publishing the signature, z = mx. === Confirmation (i.e., avowal) protocol === Bob wishes to verify the signature, z, of m by Alice under the key, y. Bob picks two random numbers: a and b, and uses them to blind the message, sending to Alice: c = magb. Alice picks a random number, q, uses it to blind, c, and then signing this using her private key, x, sending to Bob: s1 = cgq ands2 = s1x. Note that s1x = (cgq)x = (magb)xgqx = (mx)a(gx)b+q = zayb+q. Bob reveals a and b. Alice verifies that a and b are the correct blind values, then, if so, reveals q. Revealing these blinds makes the exchange zero knowledge. Bob verifies s1 = cgq, proving q has not been chosen dishonestly, and s2 = zayb+q, proving z is valid signature issued by Alice's key. Note that zayb+q = (mx)a(gx)b+q. Alice can cheat at step 2 by attempting to randomly guess s2. === Disavowal protocol === Alice wishes to convince Bob that z is not a valid signature of m under the key, gx; i.e., z ≠ mx. Alice and Bob have agreed an integer, k, which sets the computational burden on Alice and the likelihood that she should succeed by chance. Bob picks random values, s ∈ {0, 1, ..., k} and a, and sends: v1 = msga and v2 = zsya, where exponentiating by a is used to blind the sent values. Note that v2 = zsya = (mx)s(gx)a = v1x. Alice, using her private key, computes v1x and then the quotient, v1xv2−1 = (msga)x(zsgxa)−1 = msxz−s = (mxz−1)s. Thus, v1xv2−1 = 1, unless z ≠ mx. Alice then tests v1xv2−1 for equality against the values: (mxz−1)i for i ∈ {0, 1, …, k}; which are calculated by repeated multiplication of mxz−1 (rather than exponentiating for each i). If the test succeeds, Alice conjectures the relevant i to be s; otherwise, she conjectures random value. Where z = mx, (mxz−1)i = v1xv2−1 = 1 for all i, s is unrecoverable. Alice commits to i: she picks a random r and sends hash(r, i) to Bob. Bob reveals a. Alice confirms that a is the correct blind (i.e., v1 and v2 can be generated using it), then, if so, reveals r. Revealing these blinds makes the exchange zero knowledge. Bob checks hash(r, i) = hash(r, s), proving Alice knows s, hence z ≠ mx. If Alice attempts to cheat at step 3 by guessing s at random, the probability of succeeding is 1/(k + 1). So, if k = 1023 and the protocol is conducted ten times, her chances are 1 to 2100.
Read more →
Data rooms are secure spaces used for housing data, usually of a privileged or confidential nature. They can be physical data rooms, virtual data rooms (VDRs), or data centers. They are primarily used for a variety of corporate purposes, including data storage, document exchange, file sharing, financial transactions, and legal proceedings. Today, data rooms are central to workflows in mergers and acquisitions, venture capital, and corporate restructuring, increasingly utilizing artificial intelligence to securely manage and review large datasets. Historically, data rooms were strictly physical locations heavily guarded and monitored. Today, the vast majority of corporate data rooms are hosted virtually on secure cloud platforms, though physical rooms are still occasionally used for highly sensitive government or proprietary intelligence. == Physical Data Rooms == In mergers and acquisitions (M&A), the traditional data room genuinely consists of a physically secured and continually monitored room, normally in the vendor's offices or those of their legal counsel. Bidders and their advisers visit this room in order to inspect and report on various documents, legal contracts, and financial statements made available during the due diligence process. Historically, physical data rooms presented significant logistical challenges. Often, only one bidder at a time was allowed to enter to maintain document integrity and confidentiality. If new documents or new versions of documents were required, they had to be brought in by courier as hardcopies. Teams involved in large due diligence processes typically had to be flown in from many regions or countries and remain available throughout the process. Because these teams comprised a number of experts in different fields—such as legal counsel, forensic accountants, and industry specialists—the overall cost of keeping such groups on call near the physical data room was often extremely high. == Virtual Data Rooms (VDRs) == To address the costs and logistical bottlenecks of physical data rooms, virtual data rooms (VDRs) were developed to provide secure, online dissemination of confidential information. A VDR is essentially a secure cloud repository with strictly controlled access. Access is managed through secure log-ons supplied by the vendor or authority, which can be disabled at any time if a bidder withdraws from a transaction. Because much of the information released during corporate transactions is highly confidential, VDRs utilize digital rights management (DRM) to control information. Restrictions are applied to the viewers' ability to release data to third parties by disabling forwarding, copying, or printing capabilities. Modern VDRs also employ dynamic watermarking and detailed auditing capabilities. Detailed auditing is required for legal reasons so that a precise digital footprint is kept of who has viewed which version of each document, and for how long. Furthermore, modern VDR platforms are typically built to comply with stringent information security standards such as ISO 27001 and SOC 2. Transitioning from sequential physical data rooms to parallel virtual data rooms has been shown to significantly reduce the duration of M&A transactions while allowing sellers to field multiple bidders simultaneously. == Key Applications == Data rooms are commonly used by legal, accounting, investment banking, and private equity firms. Primary applications include: Mergers and Acquisitions (M&A): VDRs are central to the sell-side M&A process. After potential buyers sign a Non-Disclosure Agreement (NDA) and review a Confidential Information Memorandum (CIM), they are granted data room access to perform deep financial due diligence, such as Quality of Earnings (QoE) analysis and legal liability assessments. Venture Capital and Startups: Startups use data rooms as a centralized location for key operational data, capitalization tables, and financial projections to streamline due diligence for angel investors and venture capital firms during fundraising rounds. Initial Public Offerings (IPOs): Taking a company public requires intense regulatory scrutiny. Data rooms are used to securely share company histories and financial audits with investment bankers, legal teams, and regulatory bodies. Corporate Restructuring and Insolvency: During bankruptcies or corporate carve-outs, data rooms are used to organize outstanding debt profiles, creditor agreements, and operational liabilities. == Emerging Technologies == In recent years, the management of virtual data rooms has increasingly incorporated Artificial Intelligence (AI) and Machine Learning (ML). Generative AI and Natural Language Processing (NLP) tools are now integrated into VDRs to automatically index thousands of documents, perform auto-redaction of personally identifiable information (PII), and assist buy-side analysts in identifying hidden liabilities within unstructured text data during the due diligence phase. Modern AI algorithms can extract line items from financial statements to instantly populate structured databases.
Read more →
Sentiment analysis (also known as opinion mining) is the use of natural language processing, text analysis, computational linguistics, and biometrics to systematically identify, extract, quantify, and study affective states and subjective information. Sentiment analysis is widely applied to voice of the customer materials such as reviews and survey responses, online and social media, and healthcare materials for applications that range from marketing to customer service to clinical medicine. With the rise of deep language models, such as RoBERTa, more difficult data domains can be analyzed, e.g., news texts where authors typically express their opinion/sentiment less explicitly. == Types == A basic task in sentiment analysis is classifying the polarity of a given text at the document, sentence, or feature/aspect level—whether the expressed opinion in a document, a sentence or an entity feature/aspect is positive, negative, or neutral. Advanced, "beyond polarity" sentiment classification looks, for instance, at emotional states such as enjoyment, anger, disgust, sadness, fear, and surprise. Precursors to sentimental analysis include the General Inquirer, which provided hints toward quantifying patterns in text and, separately, psychological research that examined a person's psychological state based on analysis of their verbal behavior. Subsequently, the method described in a patent by Volcani and Fogel, looked specifically at sentiment and identified individual words and phrases in text with respect to different emotional scales. A current system based on their work, called EffectCheck, presents synonyms that can be used to increase or decrease the level of evoked emotion in each scale. Many other subsequent efforts were less sophisticated, using a mere polar view of sentiment, from positive to negative, such as work by Turney, and Pang who applied different methods for detecting the polarity of product reviews and movie reviews respectively. This work is at the document level. One can also classify a document's polarity on a multi-way scale, which was attempted by Pang and Snyder among others: Pang and Lee expanded the basic task of classifying a movie review as either positive or negative to predict star ratings on either a 3- or a 4-star scale, while Snyder performed an in-depth analysis of restaurant reviews, predicting ratings for various aspects of the given restaurant, such as the food and atmosphere (on a five-star scale). First steps to bringing together various approaches—learning, lexical, knowledge-based, etc.—were taken in the 2004 AAAI Spring Symposium where linguists, computer scientists, and other interested researchers first aligned interests and proposed shared tasks and benchmark data sets for the systematic computational research on affect, appeal, subjectivity, and sentiment in text. Even though in most statistical classification methods, the neutral class is ignored under the assumption that neutral texts lie near the boundary of the binary classifier, several researchers suggest that, as in every polarity problem, three categories must be identified. Moreover, it can be proven that specific classifiers such as the Max Entropy and SVMs can benefit from the introduction of a neutral class and improve the overall accuracy of the classification. There are in principle two ways for operating with a neutral class. Either, the algorithm proceeds by first identifying the neutral language, filtering it out and then assessing the rest in terms of positive and negative sentiments, or it builds a three-way classification in one step. This second approach often involves estimating a probability distribution over all categories (e.g. naive Bayes classifiers as implemented by the NLTK). Whether and how to use a neutral class depends on the nature of the data: if the data is clearly clustered into neutral, negative and positive language, it makes sense to filter the neutral language out and focus on the polarity between positive and negative sentiments. If, in contrast, the data are mostly neutral with small deviations towards positive and negative affect, this strategy would make it harder to clearly distinguish between the two poles. A different method for determining sentiment is the use of a scaling system whereby words commonly associated with having a negative, neutral, or positive sentiment are given an associated number on a −10 to +10 scale (most negative up to most positive) or simply from 0 to a positive upper limit such as +4. This makes it possible to adjust the sentiment of a given term relative to its environment (usually on the level of the sentence). When a piece of unstructured text is analyzed using natural language processing, each concept in the specified environment is given a score based on the way sentiment words relate to the concept and its associated score. This allows movement to a more sophisticated understanding of sentiment, because it is now possible to adjust the sentiment value of a concept relative to modifications that may surround it. Words, for example, that intensify, relax or negate the sentiment expressed by the concept can affect its score. Alternatively, texts can be given a positive and negative sentiment strength score if the goal is to determine the sentiment in a text rather than the overall polarity and strength of the text. There are various other types of sentiment analysis, such as aspect-based sentiment analysis, grading sentiment analysis (positive, negative, neutral), multilingual sentiment analysis and detection of emotions. === Subjectivity/objectivity identification === This task is commonly defined as classifying a given text (usually a sentence) into one of two classes: objective or subjective. This problem can sometimes be more difficult than polarity classification. The subjectivity of words and phrases may depend on their context and an objective document may contain subjective sentences (e.g., a news article quoting people's opinions). Moreover, as mentioned by Su, results are largely dependent on the definition of subjectivity used when annotating texts. However, Pang showed that removing objective sentences from a document before classifying its polarity helped improve performance. Subjective and objective identification, emerging subtasks of sentiment analysis to use syntactic, semantic features, and machine learning knowledge to identify if a sentence or document contains facts or opinions. Awareness of recognizing factual and opinions is not recent, having possibly first presented by Carbonell at Yale University in 1979. The term objective refers to the incident carrying factual information. Example of an objective sentence: 'To be elected president of the United States, a candidate must be at least thirty-five years of age.' The term subjective describes the incident contains non-factual information in various forms, such as personal opinions, judgment, and predictions, also known as 'private states'. In the example down below, it reflects a private states 'We Americans'. Moreover, the target entity commented by the opinions can take several forms from tangible product to intangible topic matters stated in Liu (2010). Furthermore, three types of attitudes were observed by Liu (2010), 1) positive opinions, 2) neutral opinions, and 3) negative opinions. Example of a subjective sentence: 'We Americans need to elect a president who is mature and who is able to make wise decisions.' This analysis is a classification problem. Each class's collections of words or phrase indicators are defined for to locate desirable patterns on unannotated text. For subjective expression, a different word list has been created. Lists of subjective indicators in words or phrases have been developed by multiple researchers in the linguist and natural language processing field states in Riloff et al. (2003). A dictionary of extraction rules has to be created for measuring given expressions. Over the years, in subjective detection, the features extraction progression from curating features by hand to automated features learning. At the moment, automated learning methods can further separate into supervised and unsupervised machine learning. Patterns extraction with machine learning process annotated and unannotated text have been explored extensively by academic researchers. However, researchers recognized several challenges in developing fixed sets of rules for expressions respectably. Much of the challenges in rule development stems from the nature of textual information. Six challenges have been recognized by several researchers: 1) metaphorical expressions, 2) discrepancies in writings, 3) context-sensitive, 4) represented words with fewer usages, 5) time-sensitive, and 6) ever-growing volume. Metaphorical expressions. The text contains metaphoric expression may impact on the performance on the extraction. Besides, metaphors take in different forms, which may have been contribu
Read more →
Lose It! is an American health and wellness mobile app developed by FitNow, Inc. The app generates calorie budgets for users by tracking weight, exercise, food and calorie intake, and personal goals, primarily to assist them in achieving weight loss. == History == Lose It! was developed in Boston and debuted in 2008. The app and its associated company were founded by J.J. Allaire, Charles Teague and Paul Dicristina. Prior to founding Lose It!, Teague and Allaire had founded the online research tool Onfolio, which was acquired by Microsoft in 2006. The Lose It! app was originally released as an iOS app before being released as a website in 2010 and an Android app in 2011. In 2015, Lose It! announced plans to release the app internationally. Lose It! was also available as an app for Apple Watch at its launch in 2015. The app’s “Snap It” feature, which allows users to approximate calorie counts by taking pictures of their daily meals and snacks, was released in beta in 2016. Snap It was named an Innovation Awards Honoree at the 2017 Consumer Electronics Show in Las Vegas. In 2020, Patrick Wetherille, one of the company’s earliest employees, was appointed chief executive officer. == App == Lose It! is weight loss app. The app allows users to set goals such as increasing strength, overall health/maintenance, and weight loss. It provides users recommended calorie budgets based on data such as their current weight and their desired weight. Lose It! also tracks data such as exercise/activity level and food consumption and allows users to track calories consumed by scanning barcodes for food products then retrieving calorie information for products. The app can also estimate the amount of calories in a food products. Lose It! has integration features connecting it to other apps such as Fitbit and Runkeeper. It also has social features such as joining groups and sharing progress with friends. The Premium version of the app allows users to track foods according to specific diets like keto, heart healthy or Mediterranean.
Read more →
Omni-Path Architecture (OPA) is a high-performance communication architecture developed by Intel. It aims for low communication latency, low power consumption and a high throughput. It directly competes with InfiniBand. Intel planned to develop technology based on this architecture for exascale computing. The current owner of Omni-Path is Cornelis Networks. == History == Production of Omni-Path products started in 2015 and delivery of these products started in the first quarter of 2016. In November 2015, adapters based on the 2-port "Wolf River" ASIC were announced, using QSFP28 connectors with channel speeds up to 100 Gbit/s. Simultaneously, switches based on the 48-port "Prairie River" ASIC were announced. First models of that series were available starting in 2015. In April 2016, implementation of the InfiniBand "verbs" interface for the Omni-Path fabric was discussed. In October 2016, IBM, Hewlett Packard Enterprise, Dell, Lenovo, Samsung, Seagate Technology, Micron Technology, Western Digital and SK Hynix announced a joint consortium called Gen-Z to develop an open specification and architecture for non-volatile storage and memory products—including Intel's 3D Xpoint technology—which might in part compete against Omni-Path. Intel offered their Omni-Path products and components via other (hardware) vendors. For example, Dell EMC offered Intel Omni-Path as Dell Networking H-series, following the naming-standard of Dell Networking in 2017. In July 2019, Intel announced it would not continue development of Omni-Path networks and canceled OPA 200 series (200-Gbps variant of Omni-Path). In September 2020, Intel announced that the Omni-Path network products and technology would be spun out into a new venture with Cornelis Networks. Intel would continue to maintain support for legacy Omni-Path products, while Cornelis Networks continues the product line, leveraging existing Intel intellectual property related to Omni-Path architecture. In 2021, Cornelis announced Omni-Path Express, which replaces PSM2-based drivers and middleware, which trace back to PathScale's PSM created in 2003, for the existing Omni-Path hardware, with a native libfabric provider.
Read more →
Conjugate coding is a cryptographic tool, introduced by Stephen Wiesner in the late 1960s. It is part of the two applications Wiesner described for quantum coding, along with a method for creating fraud-proof banking notes. The application that the concept was based on was a method of transmitting multiple messages in such a way that reading one destroys the others. This is called quantum multiplexing and it uses photons polarized in conjugate bases as "qubits" to pass information. Conjugate coding also is a simple extension of a random number generator. At the behest of Charles Bennett, Wiesner published the manuscript explaining the basic idea of conjugate coding with a number of examples but it was not embraced because it was significantly ahead of its time. Because its publication has been rejected, it was developed to the world of public-key cryptography in the 1980s as oblivious transfer, first by Michael Rabin and then by Shimon Even. It is used in the field of quantum computing. The initial concept of quantum cryptography developed by Bennett and Gilles Brassard was also based on this concept.
Read more →
Upworthy is a media brand that focuses on positive storytelling. It was started in March 2012 by Eli Pariser, the former executive director of MoveOn, and Peter Koechley, the former managing editor of The Onion. One of Facebook's co-founders, Chris Hughes, was an early investor. At its peak between 2012 and 2014, it reached up to 100 million people a month. In 2017, the company was acquired by Good Worldwide. == History == Upworthy was launched in 2012 with a focus on aggregating positive content, which aligned with Facebook's algorithm. Originally, Upworthy curators searched the internet for existing content to feature on the site. Once selected as an option, curators brainstormed different headlines and shareable images for the content, and tested it with a small sample of Upworthy's visitors before sharing it on the site. The site popularized a clickbait style of two-phrase headlines. The company simplifies issues that are controversial by nature, which are presented from a politically liberal point of view and are heavily fact-checked for accuracy. In June 2013, an article in Fast Company called Upworthy "the fastest growing media site of all time". It had 8.7 million unique monthly visitors in the first six months, and in November 2013, had a high of 87 million unique visitors in a single month. In 2013, Facebook changed its algorithm, leading to a significant decline in readers from that platform. Upworthy fired one round of writers in 2015, and another in 2016, after an unionization effort by some of the staff. The union involved, the Writers Guild of America, East, has organized several online "viral" news publishers. In January 2017, Upworthy was acquired by media company GOOD Worldwide. The newsrooms of the two organizations would merge as part of the acquisition. About 20 staffers were laid off as part of the merger. In March 2020, Upworthy saw a 65% increase in Instagram followers and a 47% increased interest in positive content on-site page views as a result of increased interest in positive content during the COVID-19 pandemic. In January 2023, National Geographic Books bought Good People: Stories From the Best of Humanity from Upworthy, with a publication date of September 3, 2024. The book is described as "a heartwarming collection of first-person tales that will provide comfort and inspiration to anyone who could use a little dose of joy right now". It was created by two senior Upworthy team members, Gabriel Reilich and Lucia Knell, and features 101 stories from Upworthy's audience. The co-creators encouraged Upworthy followers to connect with the brand through questions on their posts, opening the door for organic and personal stories to be shared in the comment sections. The book debuted on The New York Times nonfiction bestseller list on September 22, 2024, and remained on the list for two weeks. The book is seen in the top 10 on Publishers Weekly Fall 2024 Adult Preview: Lifestyle and on The Washington Post's "5 feel-good books".
Read more →
Quantum artificial life is the application of quantum algorithms with the ability to simulate biological behavior. Quantum computers offer many potential improvements to processes performed on classical computers, including machine learning and artificial intelligence. Artificial intelligence applications are often inspired by the idea of mimicking human brains through closely related biomimicry. This has been implemented to a certain extent on classical computers (using neural networks), but quantum computers offer many advantages in the simulation of artificial life. Artificial life and artificial intelligence are extremely similar, with minor differences; the goal of studying artificial life is to understand living beings better, while the goal of artificial intelligence is to create intelligent beings. In 2016, Alvarez-Rodriguez et al. developed a proposal for a quantum artificial life algorithm with the ability to simulate life and Darwinian evolution. In 2018, the same research team led by Alvarez-Rodriguez performed the proposed algorithm on the IBM ibmqx4 quantum computer, and received optimistic results. The results accurately simulated a system with the ability to undergo self-replication at the quantum scale. == Artificial life on quantum computers == The growing advancement of quantum computers has led researchers to develop quantum algorithms for simulating life processes. Researchers have designed a quantum algorithm that can accurately simulate Darwinian Evolution. Since the complete simulation of artificial life on quantum computers has only been actualized by one group, this section shall focus on the implementation by Alvarez-Rodriguez, Sanz, Lomata, and Solano on an IBM quantum computer. Individuals were realized as two qubits, one representing the genotype of the individual and the other representing the phenotype. The genotype is copied to transmit genetic information through generations, and the phenotype is dependent on the genetic information as well as the individual's interactions with their environment. In order to set up the system, the state of the genotype is instantiated by some rotation of an ancillary state ( | 0 ⟩ ⟨ 0 | {\displaystyle |0\rangle \langle 0|} ). The environment is a two-dimensional spatial grid occupied by individuals and ancillary states. The environment is divided into cells that are able to possess one or more individuals. Individuals move throughout the grid and occupy cells randomly; when two or more individuals occupy the same cell they interact with each other. === Self replication === The ability to self-replicate is critical for simulating life. Self-replication occurs when the genotype of an individual interacts with an ancillary state, creating a genotype for a new individual; this genotype interacts with a different ancillary state in order to create the phenotype. During this interaction, one would like to copy some information about the initial state into the ancillary state, but by the no cloning theorem, it is impossible to copy an arbitrary unknown quantum state. However, physicists have derived different methods for quantum cloning which does not require the exact copying of an unknown state. The method that has been implemented by Alvarez-Rodriguez et al. is one that involves the cloning of the expectation value of some observable. For a unitary U {\displaystyle U} which copies the expectation value of some set of observables X {\displaystyle {\mathsf {X}}} of state ρ {\displaystyle \rho } into a blank state ρ e {\displaystyle \rho _{e}} , the cloning machine is defined by any ( U , ρ e , X ) {\displaystyle (U,\rho _{e},{\mathsf {X}})} that fulfill the following: ∀ ρ ∀ X ∈ X {\displaystyle \forall \rho \forall X\in {\mathsf {X}}} X ¯ = X 1 ¯ = X 2 ¯ {\displaystyle {\bar {X}}={\bar {X_{1}}}={\bar {X_{2}}}} Where X ¯ {\displaystyle {\bar {X}}} is the mean value of the observable in ρ {\displaystyle \rho } before cloning, X 1 ¯ {\displaystyle {\bar {X_{1}}}} is the mean value of the observable in ρ {\displaystyle \rho } after cloning, and X 2 ¯ {\displaystyle {\bar {X_{2}}}} is the mean value of the observable in ρ e {\displaystyle \rho _{e}} after cloning. Note that the cloning machine has no dependence on ρ {\displaystyle \rho } because we want to be able to clone the expectation of the observables for any initial state. It is important to note that cloning the mean value of the observable transmits more information than is allowed classically. The calculation of the mean value is defined naturally as: X ¯ = T r [ ρ X ] {\displaystyle {\bar {X}}=Tr[\rho X]} , X 1 ¯ = T r [ R X ⊗ I ] {\displaystyle {\bar {X_{1}}}=Tr[RX\otimes I]} , X 2 ¯ = T r [ R I ⊗ X ] {\displaystyle {\bar {X_{2}}}=Tr[RI\otimes X]} where R = U ρ ⊗ ρ e U † {\displaystyle R=U\rho \otimes \rho _{e}U^{\dagger }} The simplest cloning machine clones the expectation value of σ z {\displaystyle \sigma _{z}} in arbitrary state ρ = | ψ ⟩ ⟨ ψ | {\displaystyle \rho =|\psi \rangle \langle \psi |} to ρ e = | 0 ⟩ ⟨ 0 | {\displaystyle \rho _{e}=|0\rangle \langle 0|} using U = C N O T {\displaystyle U=CNOT} . This is the cloning machine implemented for self-replication by Alvarez-Rodriguez et al. The self-replication process clearly only requires interactions between two qubits, and therefore this cloning machine is the only one necessary for self replication. === Interactions === Interactions occur between individuals when the two take up the same space on the environmental grid. The presence of interactions between individuals provides an advantage for shorter-lifespan individuals. When two individuals interact, exchanges of information between the two phenotypes may or may not occur based on their existing values. When both individual's control qubits (genotypes) are alike, no information will be exchanged. When the control qubits differ, the target qubits (phenotype) will be exchanged between the two individuals. This procedure produces a constantly changing predator-prey dynamic in the simulation. Therefore, long-living qubits, with a larger genetic makeup in the simulation, are at a disadvantage. Since information is only exchanged when interacting with an individual of different genetic makeup, the short-lived population has the advantage. === Mutation === Mutations exist in the artificial world with limited probability, equivalent to their occurrence in the real world. There are two ways in which the individual can mutate: through random single qubit rotations and by errors in the self-replication process. There are two different operators that act on the individual and cause mutations. The M operation causes a spontaneous mutation within the individual by rotating a single qubit by parameter θ. The parameter θ is random for each mutation, which creates biodiversity within the artificial environment. The M operation is a unitary matrix which can be described as: M = ( cos ( θ ) s i n ( θ ) s i n ( θ ) − c o s ( θ ) ) {\displaystyle M={\begin{pmatrix}\cos(\theta )&sin(\theta )\\sin(\theta )&-cos(\theta )\end{pmatrix}}} The other possible way for mutations to occur is due to errors in the replication process. Due to the no-cloning theorem, it is impossible to produce perfect copies of systems that are originally in unknown quantum states. However, quantum cloning machines make it possible to create imperfect copies of quantum states, in other words, the process introduces some degree of error. The error that exists in current quantum cloning machines is the root cause for the second kind of mutations in the artificial life experiment. The imperfect cloning operation can be seen as: U M ( θ ) = I 4 + 1 2 ( 0 0 0 1 ) ⊗ ( − 1 1 1 − 1 ) ( c o s θ + i s i n θ + 1 ) {\displaystyle U_{M}(\theta )=\mathrm {I} _{4}+{\frac {1}{2}}{\begin{pmatrix}0&0\\0&1\end{pmatrix}}\otimes {\begin{pmatrix}-1&1\\1&-1\end{pmatrix}}(cos\theta +isin\theta +1)} The two kinds of mutations affect the individual differently. While the spontaneous M operation does not affect the phenotype of the individual, the self-replicating error mutation, UM, alters both the genotype of the individual, and its associated lifetime. The presence of mutations in the quantum artificial life experiment is critical for providing randomness and biodiversity. The inclusion of mutations helps to increase the accuracy of the quantum algorithm. === Death === At the instant the individual is created (when the genotype is copied into the phenotype), the phenotype interacts with the environment. As time evolves, the interaction of the individual with the environment simulates aging which eventually leads to the death of the individual. The death of an individual occurs when the expectation value of σ z {\displaystyle \sigma _{z}} is within some ϵ {\displaystyle \epsilon } of 1 in the phenotype, or, equivalently, when ρ p = | 0 ⟩ ⟨ 0 | {\displaystyle \rho _{p}=|0\rangle \langle 0|} The Lindbladian describes the interaction of the individual with the environment: ρ
Read more →
Data profiling is the process of examining the data available from an existing information source (e.g. a database or a file) and collecting statistics or informative summaries about that data. The purpose of these statistics may be to: Find out whether existing data can be easily used for other purposes Improve the ability to search data by tagging it with keywords, descriptions, or assigning it to a category Assess data quality, including whether the data conforms to particular standards or patterns Assess the risk involved in integrating data in new applications, including the challenges of joins Discover metadata of the source database, including value patterns and distributions, key candidates, foreign-key candidates, and functional dependencies Assess whether known metadata accurately describes the actual values in the source database Understanding data challenges early in any data intensive project, so that late project surprises are avoided. Finding data problems late in the project can lead to delays and cost overruns. Have an enterprise view of all data, for uses such as master data management, where key data is needed, or data governance for improving data quality. == Introduction == Data profiling refers to the analysis of information for use in a data warehouse in order to clarify the structure, content, relationships, and derivation rules of the data. Profiling helps to not only understand anomalies and assess data quality, but also to discover, register, and assess enterprise metadata. The result of the analysis is used to determine the suitability of the candidate source systems, usually giving the basis for an early go/no-go decision, and also to identify problems for later solution design. == How data profiling is conducted == Data profiling utilizes methods of descriptive statistics such as minimum, maximum, mean, mode, percentile, standard deviation, frequency, variation, aggregates such as count and sum, and additional metadata information obtained during data profiling such as data type, length, discrete values, uniqueness, occurrence of null values, typical string patterns, and abstract type recognition. The metadata can then be used to discover problems such as illegal values, misspellings, missing values, varying value representation, and duplicates. Different analyses are performed for different structural levels. E.g. single columns could be profiled individually to get an understanding of frequency distribution of different values, type, and use of each column. Embedded value dependencies can be exposed in a cross-columns analysis. Finally, overlapping value sets possibly representing foreign key relationships between entities can be explored in an inter-table analysis. Normally, purpose-built tools are used for data profiling to ease the process. The computational complexity increases when going from single column, to single table, to cross-table structural profiling. Therefore, performance is an evaluation criterion for profiling tools. == When is data profiling conducted? == According to Kimball, data profiling is performed several times and with varying intensity throughout the data warehouse developing process. A light profiling assessment should be undertaken immediately after candidate source systems have been identified and DW/BI business requirements have been satisfied. The purpose of this initial analysis is to clarify at an early stage if the correct data is available at the appropriate detail level and that anomalies can be handled subsequently. If this is not the case the project may be terminated. Additionally, more in-depth profiling is done prior to the dimensional modeling process in order assess what is required to convert data into a dimensional model. Detailed profiling extends into the ETL system design process in order to determine the appropriate data to extract and which filters to apply to the data set. Additionally, data profiling may be conducted in the data warehouse development process after data has been loaded into staging, the data marts, etc. Conducting data at these stages helps ensure that data cleaning and transformations have been done correctly and in compliance of requirements. == Benefits and examples == Data profiling can improve data quality, shorten the implementation cycle of major projects, and improve users' understanding of data. Discovering business knowledge embedded in data itself is one of the significant benefits derived from data profiling. It can improve data accuracy in corporate databases.
Read more →
Instagram face is a beauty standard based on the filters and influencers popular on Instagram. == Overview == An "Instagram face" has catlike eyes, long lashes, a small nose, high cheekbones, full lips, and a blank expression. Digital filters manipulate photographs and video to create an idealized image that, according to critics, has resulted in an unrealistic and homogeneous beauty standard. According to Jia Tolentino, the face is "distinctly white but ambiguously ethnic". The face has been described as a racial composite of different peoples. In 2024, cosmetic surgeon Paul Banwell said, "People used to come to see me asking to look like a particular celebrity, but many patients come to me now wanting to look like the filtered version of themselves." While based on digital filters, the look is achieved in person using heavy applications of makeup or cosmetic surgery. Plastic surgery, Botox injections, and injectable filler have significantly increased in popularity since the rise of digital filters. Influencers market makeup products designed to recreate the look. == History == The growth of reality television series and social media throughout the 2010s has influenced the popularity of Instagram face. In 2019, The New Yorker referred to this phenomenon as "Instagram Face," identifying Kim Kardashian as its "patient zero." Similarly, her younger sister Kylie Jenner significantly impacted the trend with her 2015 lip filler confession, which acted as a catalyst, introducing Juvéderm to a new generation. Sirin Kale of Vice News has described Jenner as "at the vanguard of an aesthetic that’s swept through British towns and cities," while also pointing towards other celebrities such as Iggy Azalea and Farrah Abraham. In 2018, Americans underwent 7 million neurotoxin injections and 2.5 million filler injections and spent $16.5 billion on cosmetic surgery. 92% of the latter was performed on women. Botox usage has also been on the rise. == Criticism == In her 2021 book The Selfie, Temporality, and Contemporary Photography, Claire Raymond of Princeton University criticised "Instagram faces" for erasing "heritable quirks and lived history; it erases what makes the human face so compelling, whether conventionally beautiful or not," while also arguing that the procedures used to create Instagram faces "numb and freeze the face and skin, rendering less mobile the lips, the eyes, and the neck. Numbness is the central feature of the experience for the woman who gets Instagram face through cosmetic procedures. Others may see her more, but she feels less and less." == Influence on popular culture == The increasing popularity of cosmetic surgeries towards a homogeneous ideal has resulted in the emergence of the "goopcore" sub-genre of body horror. The sub-genre combines graphic violence with body modifications from the beauty industry. Allie Rowbottom's goopcore novel Aesthetica centers around an influencer attempting to undo years of plastic surgery with a new experimental procedure.
Read more →
Social media mining is the process of obtaining data from user-generated content on social media in order to extract actionable patterns, form conclusions about users, and act upon the information. Mining supports targeting advertising to users or academic research. The term is an analogy to the process of mining for minerals. Mining companies sift through raw ore to find the valuable minerals; likewise, social media mining sifts through social media data in order to discern patterns and trends about matters such as social media usage, online behaviour, content sharing, connections between individuals, buying behaviour. These patterns and trends are of interest to companies, governments and not-for-profit organizations, as such organizations can use the analyses for tasks such as design strategies, introduce programs, products, processes or services. Social media mining uses concepts from computer science, data mining, machine learning, and statistics. Mining is based on social network analysis, network science, sociology, ethnography, optimization and mathematics. It attempts to formally represent, measure and model patterns from social media data. In the 2010s, major corporations, governments and not-for-profit organizations began mining to learn about customers, clients and others. Platforms such as Google, Facebook (partnered with Datalogix and BlueKai) conduct mining to target users with advertising. Scientists and machine learning researchers extract insights and design product features. Users may not understand how platforms use their data. Users tend to click through Terms of Use agreements without reading them, leading to ethical questions about whether platforms adequately protect users' privacy. During the 2016 United States presidential election, Facebook allowed Cambridge Analytica, a political consulting firm linked to the Trump campaign, to analyze the data of an estimated 87 million Facebook users to profile voters, creating controversy when this was revealed. == Background == As defined by Kaplan and Haenlein, social media is the "group of internet-based applications that build on the ideological and technological foundations of Web 2.0, and that allow the creation and exchange of user-generated content." There are many categories of social media including, but not limited to, social networking (Facebook or LinkedIn), microblogging (Twitter), photo sharing (Flickr, Instagram, Photobucket, or Picasa), news aggregation (Google Reader, StumbleUpon, or Feedburner), video sharing (YouTube, MetaCafe), livecasting (Ustream or Twitch), virtual worlds (Kaneva), social gaming (World of Warcraft), social search (Google, Bing, or Ask.com), and instant messaging (Google Talk, Skype, or Yahoo! messenger). The first social media website was introduced by GeoCities in 1994. It enabled users to create their own homepages without having a sophisticated knowledge of HTML coding. The first social networking site, SixDegrees.com, was introduced in 1997. Since then, many other social media sites have been introduced, each providing service to millions of people. These individuals form a virtual world in which individuals (social atoms), entities (content, sites, etc.) and interactions (between individuals, between entities, between individuals and entities) coexist. Social norms and human behavior govern this virtual world. By understanding these social norms and models of human behavior and combining them with the observations and measurements of this virtual world, one can systematically analyze and mine social media. Social media mining is the process of representing, analyzing, and extracting meaningful patterns from data in social media, resulting from social interactions. It is an interdisciplinary field encompassing techniques from computer science, data mining, machine learning, social network analysis, network science, sociology, ethnography, statistics, optimization, and mathematics. Social media mining faces grand challenges such as the big data paradox, obtaining sufficient samples, the noise removal fallacy, and evaluation dilemma. Social media mining represents the virtual world of social media in a computable way, measures it, and designs models that can help us understand its interactions. In addition, social media mining provides necessary tools to mine this world for interesting patterns, analyze information diffusion, study influence and homophily, provide effective recommendations, and analyze novel social behavior in social media. == Uses == Social media mining is used across several industries including business development, social science research, health services, and educational purposes. Once the data received goes through social media analytics, it can then be applied to these various fields. Often, companies use the patterns of connectivity that pervade social networks, such as assortativity—the social similarity between users that are induced by influence, homophily, and reciprocity and transitivity. These forces are then measured via statistical analysis of the nodes and connections between these nodes. Social analytics also uses sentiment analysis, because social media users often relay positive or negative sentiment in their posts. This provides important social information about users' emotions on specific topics. These three patterns have several uses beyond pure analysis. For example, influence can be used to determine the most influential user in a particular network. Companies would be interested in this information in order to decide who they may hire for influencer marketing. These influencers are determined by recognition, activity generation, and novelty—three requirements that can be measured through the data mined from these sites. Analysts also value measures of homophily: the tendency of two similar individuals to become friends. Users have begun to rely on information of other users' opinions in order to understand diverse subject matter. These analyses can also help create recommendations for individuals in a tailored capacity. By measuring influence and homophily, online and offline companies are able to suggest specific products for individuals consumers, and groups of consumers. Social media networks can use this information themselves to suggest to their users possible friends to add, pages to follow, and accounts to interact with. == Perception == Modern social media mining is a controversial practice that has led to exponential gains in user growth for tech giants such as Facebook, Inc., Twitter, and Google. Companies such as these, considered "Big Tech" are companies that build algorithms that take advantage of user input to understand their preferences, and keep them on the platform as much as possible. These inputs, that can be as simple as time spent on a given screen, provide the data being mined, and lead to companies profiting heavily from using that data to capitalize on extremely accurate predictions about user behavior. The growth of platforms accelerated rapidly once these strategies were put in place; Most of the largest platforms now average over 1 billion active users per month as of 2021. It has been claimed by a multitude of anti-algorithm personalities, like Tristan Harris or Chamath Palihapitiya, that certain companies (specifically Facebook) valued growth above all else, and ignored potential negative impacts from these growth engineering tactics. At the same time, users have now created their own data arbitrages with the help of their own data, through content monetization and becoming influencers. Users typically have access to a varied set of analytics specific to people that interact with them on social media, and can use these as building blocks for their own targeting and growth strategies through ads and posts that cater to their audiences. Influencers also commonly promote products and services for established brands, creating one of the largest digital industries: Influencer marketing. Instagram, Facebook, Twitter, YouTube, Google, and others have long given access to platform analytics, and allowed third parties to access that information as well, at times unbeknownst to even the user whose data is being viewed/bought. == Research == === Research areas === Social media event detection – Social networks enable users to freely communicate with each other and share their recent news, ongoing activities or views about different topics. As a result, they can be seen as a potentially viable source of information to understand the current emerging topics/events. Public health monitoring and surveillance - Using large-scale analysis of social media to study large cohorts of patients and the general public, e.g. to obtain early warning signals of drug-drug interactions and adverse drug reactions, or understand human reproduction and sexual interest. Community structure (Community Detection/Evolution/Evaluation) – Identifying communities on social networks, how t
Read more →
CPU modes (also called processor modes, CPU states, CPU privilege levels and other names) are operating modes for the central processing unit of most computer architectures that place restrictions on the type and scope of operations that can be performed by instructions being executed by the CPU. For example, this design allows an operating system to run with more privileges than application software by running the operating systems and applications in different modes. Ideally, only highly trusted kernel code is allowed to execute in the unrestricted mode; everything else (including non-supervisory portions of the operating system) runs in a restricted mode and must use a system call (via interrupt) to request the kernel perform on its behalf any operation that could damage or compromise the system, making it impossible for untrusted programs to alter or damage other programs (or the computing system itself). Device drivers are designed to be part of the kernel due to the need for frequent I/O access. Multiple modes can be implemented, e.g. allowing a hypervisor to run multiple operating system supervisors beneath it, which is the basic design of many virtual machine systems available today. == Mode types == The unrestricted mode is often called kernel mode, but many other designations exist (master mode, supervisor mode, privileged mode, etc.). Restricted modes are usually referred to as user modes, but are also known by many other names (slave mode, problem state, etc.). Hypervisor Hypervisor mode is used to support virtualization, allowing the simultaneous operation of multiple operating systems. Kernel and user In kernel mode, the CPU may perform any operation allowed by its architecture; any instruction may be executed, any I/O operation initiated, any area of memory accessed, and so on. In the other CPU modes, certain restrictions on CPU operations are enforced by the hardware. Typically, certain instructions are not permitted (especially those—including I/O operations—that could alter the global state of the machine), some memory areas cannot be accessed, etc. User-mode capabilities of the CPU are typically a subset of those available in kernel mode, but in some cases, such as hardware emulation of non-native architectures, they may be significantly different from those available in standard kernel mode. Some CPU architectures support more modes than those, often with a hierarchy of privileges. These architectures are often said to have ring-based security, wherein the hierarchy of privileges resembles a set of concentric rings, with the kernel mode in the center. Multics hardware was the first significant implementation of ring security, but many other hardware platforms have been designed along similar lines, including the Intel 80286 protected mode, and the IA-64 as well, though it is referred to by a different name in these cases. Mode protection may extend to resources beyond the CPU hardware itself. Hardware registers track the current operating mode of the CPU, but additional virtual-memory registers, page-table entries, and other data may track mode identifiers for other resources. For example, a CPU may be operating in Ring 0 as indicated by a status word in the CPU itself, but every access to memory may additionally be validated against a separate ring number for the virtual-memory segment targeted by the access, and/or against a ring number for the physical page (if any) being targeted. This has been demonstrated with the PSP handheld system. Hardware that meets the Popek and Goldberg virtualization requirements makes writing software to efficiently support a virtual machine much simpler. Such a system can run software that "believes" it is running in supervisor mode, but is actually running in user mode. == Architectures == Several computer systems introduced in the 1960s, such as the IBM System/360, DEC PDP-6/PDP-10, the GE-600/Honeywell 6000 series, and the Burroughs B5000 series and B6500 series, support two CPU modes; a mode that grants full privileges to code running in that mode, and a mode that prevents direct access to input/output devices and some other hardware facilities to code running in that mode. The first mode is referred to by names such as supervisor state (System/360), executive mode (PDP-6/PDP-10), master mode (GE-600 series), control mode (B5000 series), and control state (B6500 series). The second mode is referred to by names such as problem state (System/360), user mode (PDP-6/PDP-10), slave mode (GE-600 series), and normal state (B6500 series); there are multiple non-control modes in the B5000 series. === RISC-V === RISC-V has three main CPU modes: User Mode (U), Supervisor Mode (S), and Machine Mode (M). Virtualization is supported via an orthogonal CSR setting instead of a fourth mode.
Read more →
Perfectly Imperfect is an online newsletter and social media platform. It was initially founded in 2020 as a biweekly email newsletter that focused on recommendations. In January 2024, Perfectly Imperfect launched PI.FYI, a social media platform. The platform is based around sharing recommendations. Its main feed is presented in reverse chronological order and is not algorithmically curated. == History == Perfectly Imperfect was started during the COVID-19 pandemic by Tyler Bainbridge, alongside college friends Alex Cushing and Serey Morm, whom he met at UMass Lowell; Morm later departed. Motivated by a dissatisfaction with algorithm-driven recommendation culture, they launched on Substack in September 2020. Its early newsletter format, PI, published brief recommendation lists and personal notes from contributors. Contributors have included a mix of underground artists and more established creative figures, such as Charli XCX, Chloe Cherry, Chloe Wise, and Meetka Otto. In October 2024, PI announced it was leaving Substack to launch its own site. == Overview == The current platform, PI.FYI, features both editorial content (guest columns, long-form essays, staff picks) and user-generated recommendations. The platform also supports "Ask" posts, where users can solicit recommendations from the community, and allows commenting, liking, and profile customization. In August 2025, it launched an events feature. In 2022, Perfectly Imperfect hosted their first offline event at Baby's All Right in Brooklyn, with a performance by The Dare. They have since expanded their event promotion/sponsorship to markets such as Los Angeles, San Francisco, and even Auckland.
Read more →
Random-resistor-random-temperature Kirchhoff-law-Johnson-noise key exchange, also known as RRRT-KLJN or simply KLJN, is an approach for distributing cryptographic keys between two parties that claims to offer unconditional security. This claim, which has been contested, is significant, as the only other key exchange approach claiming to offer unconditional security is Quantum key distribution. The KLJN secure key exchange scheme was proposed in 2005 by Laszlo Kish and Granqvist. It has the advantage over quantum key distribution in that it can be performed over a metallic wire with just four resistors, two noise generators, and four voltage measuring devices---equipment that is low-priced and can be readily manufactured. It has the disadvantage that several attacks against KLJN have been identified which must be defended against. "Given that the amount of effort and funding that goes into Quantum Cryptography is substantial (some even mock it as a distraction from the ultimate prize which is quantum computing), it seems to me that the fact that classic thermodynamic resources allow for similar inherent security should give one pause," wrote Henning Dekant, the founder of the Quantum Computing Meetup, in April 2013. The Cybersecurity Curricula 2017, a joint project of the Association for Computing Machinery, the IEEE Computer Society, the Association for Information Systems, and the International Federation for Information Processing Technical Committee on Information Security Education (IFIP WG 11.8) recommends teaching the KLJN Scheme as part of teaching "Advanced concepts" in its knowledge unit on cryptography. == See Also/Further Reading ==
Read more →