AI App Quora

AI App Quora — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

  • AlphaChip (controversy)

    AlphaChip (controversy)

    The AlphaChip controversy refers to a series of public, scholarly, and legal disputes surrounding a 2021 Nature paper by Google-affiliated researchers. The paper describes an approach to macro placement, a stage of chip floorplanning, based on reinforcement learning (RL), a machine learning method in which a system iteratively improves its decisions by optimizing performance-based reward signals. The primary technical question is whether the new techniques are better than existing (non-AI) techniques. Both internal Google studies and external attempts to replicate the algorithm have failed to show the claimed benefits. No head-to-head comparison is available because the data used in the paper is proprietary, and Google has not released any results from running its algorithm on public benchmarks. This has resulted in considerable skepticism over the paper's claims. In addition, the inability of others (both inside and outside of Google) to replicate the claimed results have sparked concerns about the paper’s methodology, reproducibility, and scientific integrity. The lead researchers of the Nature paper were affiliated with Google Brain, which became part of Google DeepMind, and later spun off into the company Ricursive. == Motivation for research: Macro placement in chip layout == Chip design for modern integrated circuits is a complex, expert-driven process that relies on electronic design automation. It determines the performance of the final chip, and takes weeks or months to complete. Advances that produce better designs, or complete the process faster, are commercially and academically significant. Macro placement is a step during chip design that determines the locations of large circuit components (macros) within a chip. It is followed by detailed placement, which places the far more numerous but much smaller standard cells. Alternatively, mixed-size placement simultaneously places both large macros and millions of small cells, requiring algorithms to handle objects that differ by several orders of magnitude in area and mobility. The number of macros per circuit typically ranges from several to thousands. Wiring must be performed after placement, and the details of this wiring strongly influence the power, performance, and area (PPA) of the completed chip. The full wiring calculation is very resource intensive, so placement tools typically use a proxy cost, a simplified objective function used to guide the placement algorithm during training and evaluation. The faithfulness of the chosen proxy cost to the final objective cost is a critical aspect of placer performance. === State of the art as of 2021 === Chips have been designed since the 1960s, so there were many existing methods as of 2021. Available options included manual design, academic tools, and commercial offerings. Academic methods include combinatorial optimization techniques such as simulated annealing, analytical placement, hierarchical heuristics, and as of 2019 reinforcement learning and broader machine learning techniques.. Existing (non-AI) academic tools for solving the same problem include APlace, NTUplace3, ePlace, RePlace, and DREAMPlace. Commercial EDA vendors also offered automated software tools for floorplanning and mixed-size placement. For instance, as of 2019 Cadence’s Innovus implementation software offered a Concurrent Macro Placer (CMP) feature to automatically place large blocks and standard cells. == The 2021 Nature paper and its claims == In 2021, Nature published a paper under the title “A graph‑placement methodology for fast chip design” co‑authored by 21 Google-affiliated researchers. The paper reported that an RL agent could generate macro placements for integrated circuits "in under six hours" and achieve improvements over human-designed layouts in power, timing performance, and area (PPA), standard chip-quality metrics referring respectively to energy consumption, chip operating speed, and silicon footprint (evaluated after wire routing). It introduced a sequential macro placement algorithm in which macros are placed one at a time instead of optimizing their locations concurrently. At each step, the algorithm selects a location for a single macro on a discretized chip canvas, conditioning its decision on the placements of previously placed macros. This sequential formulation converts macro placement into a long-horizon decision process in which early placement choices constrain later ones. After macro placement, force-directed placement is applied to place standard cells connected to the macros. Deep reinforcement learning is used to train a policy network to place macros by maximizing a reward that reflects final placement quality (for example, wirelength and congestion). Policy learning occurs during self‑play for one or multiple circuit designs. Further placement optimizations refine the overall layout by balancing wirelength, density, and overlap constraints, while treating the macro locations produced by the RL policy as fixed obstacles. The approach relies on pre-training, in which the RL model is first trained on a corpus of prior designs (twenty in the Nature paper) to learn general placement patterns before being fine-tuned on a specific chip. Circuit examples used in the study were parts of proprietary Google TPU designs, called blocks (or floorplan partitions). The paper reported results on five blocks and described the approach as generalizable across chip designs. == Controversy == Soon after the paper's publication, controversy arose over whether the claims were true, whether they were sufficiently proven, and whether academic standards were followed. These controversies arose both within Google and among external academic experts. === Internal dispute at Google and legal proceedings === In 2022, Satrajit Chatterjee, a Google engineer involved in reviewing the AlphaChip work, raised concerns internally and drafted an alternative analysis, (Stronger Baselines) arguing that established methods outperformed the RL approach under fair comparison. In March 2022, Google declined to publish this analysis and terminated Chatterjee's employment. Chatterjee filed a wrongful dismissal lawsuit, alleging that representations related to the AlphaChip research involved fraud and scientific misconduct. According to court documents, Chatterjee's study was conducted "in the context of a large potential Google Cloud deal". He noted that it "would have been unethical to imply that we had revolutionary technology when our tests showed otherwise" and claimed Google was deliberately withholding material information. Furthermore, the committee that reviewed his paper and disapproved its publication was allegedly chaired by subordinates of Jeff Dean, a senior co-author of the Nature paper. Google’s subsequent motion to dismiss was denied, holding that Chatterjee had plausibly alleged retaliation for refusing to engage in conduct he believed would violate state or federal law. === External controversy === The external questions can be summarized in four main points: (a) Are the claims supported by the evidence provided? (b) Did the paper provide enough information to allow the results to be independently reproduced and verified? If so, are the results an improvement over existing academic and commercial tools? (c) Were the comparisons in the paper done fairly and with full disclosure? (d) Were academic standards followed? Each of these is discussed below. ==== Are the claims supported by the evidence provided? ==== The Nature paper described the reduction in design-process time as going from "days or weeks" to "hours", but did not provide per-design time breakdowns or specify the number of engineers, their level of expertise, or the baseline tools and workflow against which this comparison was made. It was also unclear whether the "days or weeks" baseline included time spent on other tasks such as functional design changes. The paper also evaluated the method on fewer benchmarks (five) than is common in the field, and showed mixed results across different evaluation goals While the approach was described as improving circuit area, this claim seems unsupported, as the RL optimization did not alter the overall circuit area, as it adjusted only the locations of fixed-shape non-overlapping circuit components within a fixed rectangular layout boundary. ==== Comparison with existing methods, and replicating the algorithm ==== Because macro placement is largely geometric and its fundamental algorithms are not tied to a specific process node, competing approaches can be evaluated on public benchmarks (tests) across technologies, rather than primarily on proprietary internal designs. This is standard procedure when comparing academic placers, see . In contrast, Google has only reported results only on internal proprietary designs, and as of 2026 has not offered comparisons with prior methods on common benchmarks. Researchers at the University of Califor

    Read more →
  • Adobe Prelude

    Adobe Prelude

    Adobe Prelude was an ingest and logging software application for tagging media with metadata for searching, post-production workflows, and footage lifecycle management. Adobe Prelude is also made to work closely with Adobe Premiere Pro. It is part of the Adobe Creative Cloud and is geared towards professional video editing alone or with a group. The software also offers features like rough cut creation. A speech transcription feature was removed in December 2014. == History == Adobe announced that on April 23, 2012 Adobe OnLocation would be shut down and Adobe Prelude would launch on May 7, 2012. Adobe stated OnLocation's production was stopping because of the growing trend in the industry toward tapeless, native workflows, Adobe stresses that Adobe Prelude is not a direct replacement for OnLocation. Adobe OnLocation was available in CS5 but not in CS6 and Adobe Prelude is only available in CS6. Adobe still offers technical support for OnLocation. In 2021, Adobe announced they would be discontinuing Adobe Prelude, starting by removing it from their website on September 8, 2021. Support for existing users will continue through September 8, 2024. == Features == Prelude is used to tag media, log data, create and export metadata and generate rough cuts that can be sent to Adobe Premiere Pro. A user can add a tag to a piece of media that will show up on Premiere Pro or if another user opens that media with Prelude. Ingest Footage Prelude can ingest all kinds of file types. Once ingested, Prelude can duplicate, transcode and verify the files. Log Footage Prelude can log data only using the keyboard. Create Rough Cuts Prelude is able to generate Rough Cuts. Rough Cuts are a combination of sub clips that will hold any metadata a user feeds into it. Rough cuts can hold metadata such as markers and comments, and this metadata will stay on this footage. Workflow Accessibility Prelude is an XMP - based open platform that allows for custom integration into many video editing platforms. == Features from OnLocation == Many features from Adobe OnLocation went to Adobe Prelude or Adobe Premiere Pro. Adobe OnLocation thrived on tape - based cameras and setting up a shot before shooting it, with the change in the industry, this problem is irrelevant in post production. Adobe OnLocation also allowed the user to add tags and scripting metadata that would carry over to Premiere Pro. OnLocation also had a Media Browser pane, which is the standard for any Adobe program today, Prelude has this Media Browser as well. == Prelude Live Logger == Prelude Live Logger is an application integrated with Prelude CC. Prelude Live Logger is designed to capture notes to use during video logging and editing while you shoot footage on an iPad's camera. Editors can import and combine this metadata with footage from Prelude throughout editing to facilitate various tasks.

    Read more →
  • Fatsecret

    Fatsecret

    Fatsecret, commonly styled as fatsecret, is a mobile application, website and API that helps people achieve their weight loss goals and find accurate nutrition information. It also offers a weight loss clinic with coaching and medically supported programs. The platform powers global health apps. == History == Fatsecret was founded in 2006 in Melbourne, Australia by Lenny Moses and Rodney Moses. As of 2019, Lenny serves as the company's CEO. The company is known for its calorie counting and meal tracking app, and by April 2016, the company claimed to have 45 million users of its services. In August 2018, a premium version of its app was released. Since August 2009, the company has operated the Fatsecret Platform API, which allows access to its global food and nutrition database. Fatsecret reportedly had 900,000 downloads of its app in January 2020. In an analysis of several Health & Fitness app subcategories for the United States in January 2021, Fatsecret was reported to have the highest 30 day user retention rate of top Calorie Counter + Meal Planner for Weight Loss apps.

    Read more →
  • Imix video cube

    Imix video cube

    The Imix (also known as ImMix) Video Cube is one of the first computer non-linear editing systems that was a full broadcast quality online video finishing machine. After its release in 1994, Imix released a more advanced version, the Imix Turbo Cube, which boasted 4 channels of real time layered visual effects. It was a hardware computer system controlled by an Apple Macintosh computer.

    Read more →
  • Stencil buffer

    Stencil buffer

    A stencil buffer is an extra data buffer, in addition to the color buffer and Z-buffer, found on modern graphics hardware. The buffer is per pixel and works on integer values, usually with a depth of one byte per pixel. The Z-buffer and stencil buffer often share the same area in the RAM of the graphics hardware. In the simplest case, the stencil buffer is used to limit the area of rendering (stenciling). More advanced usage of the stencil buffer makes use of the strong connection between the Z-buffer and the stencil buffer in the rendering pipeline. For example, stencil values can be automatically increased/decreased for every pixel that fails or passes the depth test. The simple combination of depth test and stencil modifiers make a vast number of effects possible (such as stencil shadow volumes, Two-Sided Stencil, compositing, decaling, dissolves, fades, swipes, silhouettes, outline drawing, or highlighting of intersections between complex primitives) though they often require several rendering passes and, therefore, can put a heavy load on the graphics hardware. The most typical application is still to add shadows to 3D applications. It is also used for planar reflections. Other rendering techniques, such as portal rendering, use the stencil buffer in other ways; for example, it can be used to find the area of the screen obscured by a portal and re-render those pixels correctly. The stencil buffer and its modifiers can be accessed in computer graphics by using APIs like OpenGL, Direct3D, Vulkan or Metal. == Architecture == The stencil buffer typically shares the same memory space as the Z-buffer, and typically the ratio is 24 bits for Z-buffer + 8 bits for stencil buffer or, in the past, 15 bits for Z-buffer + 1 bit for stencil buffer. Another variant is 4 + 24, where 28 of the 32 bits are used and 4 ignored. Stencil and Z-buffers are part of the frame buffer, coupled to the color buffer. The first chip available to a wider market was 3Dlabs' Permedia II, which supported a one-bit stencil buffer. The bits allocated to the stencil buffer can be used to represent numerical values in the range [0, 2n-1], and also as a Boolean matrix (n is the number of allocated bits), each of which may be used to control the particular part of the scene. Any combination of these two ways of using the available memory is also possible. == Stencil test == Stencil test or stenciling is among the operations on the pixels/fragments (Per-pixel operations), located after the alpha test, and before the depth test. The stencil test ensures undesired pixels do not reach the depth test. This saves processing time for the scene. Similarly, the alpha test can prevent corresponding pixels to reach the stencil test. The test itself is carried out over the stencil buffer to some value in it, or altered or used it, and carried out through the so-called stencil function and stencil operations. The stencil function is a function by which the stencil value of a certain pixel is compared to a given reference value. If this comparison is logically true, the stencil test passes. Otherwise not. In doing so, the possible reaction caused by the result of comparing three different state-depth and stencil buffer: Stencil test is not passed Stencil test is passed but not the depth test Both tests are passed (or stencil test is passed, and the depth is not enabled) For each of these cases, different operations can be set over the examined pixel. In the OpenGL stencil functions, the reference value and mask, respectively, define the function glStencilFunc. In Direct3D each of these components is adjusted individually using methods SetRenderState devices currently in control. This method expects two parameters, the first of which is a condition that is set and the other its value. In the order that was used above, these conditions are called D3DRS_STENCILFUNC, D3DRS_STENCILREF, and D3DRS_STENCILMASK. Stencil operations in OpenGL adjust glStencilOp function that expects three values. In Direct3D, again, each state sets a specific method SetRenderState. The three states that can be assigned to surgery are called D3DRS_STENCILFAIL, D3DRENDERSTATE_STENCILZFAIL, and D3DRENDERSTATE_STENCILPASS. == Z-fighting == Due to the lack of precision in the Z-buffer, coplanar polygons that are short-range, or overlapping, can be portrayed as a single plane with a multitude of irregular cross-sections. These sections can vary depending on the camera position and other parameters and are rapidly changing. This is called Z-fighting. There exist multiple solutions to this issue: - Bring the far plane closer to restrict the scene's depth, thus increasing the accuracy of the Z-buffer, or reducing the distance at which objects are visible in the scene. - Increase the number of bits allocated to the Z-buffer, which is possible at the expense of memory for the stencil buffer. - Move polygons farther apart from one another, which restricts the possibilities for the artist to create an elaborate scene. All of these approaches to the problem can only reduce the likelihood that the polygons will experience Z-fighting, and do not guarantee a definitive solution in the general case. A solution that includes the stencil buffer is based on the knowledge of which polygon should be in front of the others. The silhouette of the front polygon is drawn into the stencil buffer. After that, the rest of the scene can be rendered only where the silhouette is negative, and so will not clash with the front polygon. == Shadow volume == Shadow volume is a technique used in 3D computer graphics to add shadows to a rendered scene. They were first proposed by Frank Crow in 1977 as the geometry describing the 3D shape of the region occluded from a light source. A shadow volume divides the virtual world in two: areas that are in shadow and areas that are not. The stencil buffer implementation of shadow volumes is generally considered among the most practical general-purpose real-time shadowing techniques for use on modern 3D graphics hardware. It has been popularised by the video game Doom 3, and a particular variation of the technique used in this game has become known as Carmack's Reverse. == Reflections == Reflection of a scene is drawn as the scene itself transformed and reflected relative to the "mirror" plane, which requires multiple render passes and using of stencil buffer to restrict areas where the current render pass works: Draw the scene excluding mirror areas – for each mirror lock the Z-buffer and color buffer Render visible part of the mirror Depth test is set up so that each pixel is passed to enter the maximum value and always passes for each mirror: Depth test is set so that it passes only if the distance of a pixel is less than the current (default behavior) The matrix transformation is changed to reflect the scene relative to the mirror plane Unlock the Z-buffer and color buffer Draw the scene, but only the part of it that lies between the mirror plane and the camera. In other words, a mirror plane is also a clipping plane Again locks color buffer, depth test is set so that it always passes, reset stencil for the next mirror. == Planar Shadows == While drawing a plane of shadows, there are two dominant problems: The first concerns the problem of deep struggle in case the flat geometry is not awarded on the part covered with the shadow of shadows and outside. See the section that relates to this. Another problem relates to the extent of the shadows outside the area where the plane there. Another problem, which may or may not appear, depending on the technique, the design of more polygons in one part of the shadow, resulting in darker and lighter parts of the same shade. All three problems can be solved geometrically, but because of the possibility that hardware acceleration is directly used, it is a far more elegant implementation using the stencil buffer: 1. Enable lights and the lights 2. Draw a scene without any polygon that should be projected shadows 3. Draw all polygons which should be projected shadows, but without lights. In doing so, the stencil buffer, the pixel of each polygon to be assigned to a specific value for the ground to which they belong. The distance between these values should be at least two, because for each plane to be used two values for two states: in the shadows and bright. 4. Disable any global illumination (to ensure that the next steps will affect only individual selected light) For each plane: For each light: 1. Edit a stencil buffer and only the pixels that carry a specific value for the selected level. Increase the value of all the pixels that are projected objects between the date of a given level and bright. 2. Allow only selected light for him to draw level at which part of her specific value was not changed. == Spatial shadows == Stencil buffer implementation of spatial drawing shadows is any shadow of a geometric body that its volume includes part of the scene that is

    Read more →
  • Ordered dithering

    Ordered dithering

    Ordered dithering is any image dithering algorithm which uses a pre-set threshold map tiled across an image. It is commonly used to display a continuous image on a display of smaller color depth. For example, Microsoft Windows uses it in 16-color graphics modes. With the most common "Bayer" threshold map, the algorithm is characterized by noticeable crosshatch patterns in the result. == Threshold map == The algorithm reduces the number of colors by applying a threshold map M to the pixels displayed, causing some pixels to change color, depending on the distance of the original color from the available color entries in the reduced palette. The first threshold maps were designed by hand to minimise the perceptual difference between a grayscale image and its two-bit quantisation for up to a 4x4 matrix. An optimal threshold matrix is one that for any possible quantisation of color has the minimum possible texture so that the greatest impression of the underlying feature comes from the image being quantised. It can be proven that for matrices whose side length is a power of two there is an optimal threshold matrix. The map may be rotated or mirrored without affecting the effectiveness of the algorithm. This threshold map (for sides with length as power of two) is also known as a Bayer matrix or, when unscaled, an index matrix. For threshold maps whose dimensions are a power of two, the map can be generated recursively via: M 2 n = 1 ( 2 n ) 2 [ 4 M n 4 M n + 2 J n 4 M n + 3 J n 4 M n + J n ] = J 2 ⊗ M n + 1 n 2 M 2 ⊗ J n , {\displaystyle \mathbf {M} _{2n}={\frac {1}{(2n)^{2}}}{\begin{bmatrix}4\mathbf {M} _{n}&4\mathbf {M} _{n}+2\mathbf {J} _{n}\\4\mathbf {M} _{n}+3\mathbf {J} _{n}&4\mathbf {M} _{n}+\mathbf {J} _{n}\end{bmatrix}}=\mathbf {J} _{2}\otimes \mathbf {M} _{n}+{\frac {1}{n^{2}}}\mathbf {M} _{2}\otimes \mathbf {J} _{n},} where J n {\displaystyle \mathbf {J} _{n}} are n × n {\displaystyle n\times n} matrices of ones and ⊗ {\displaystyle \otimes } is the Kronecker product. While the metric for texture that Bayer proposed could be used to find optimal matrices for sizes that are not a power of two, such matrices are uncommon as no simple formula for finding them exists, and relatively small matrix sizes frequently give excellent practical results (especially when combined with other modifications to the dithering algorithm). This function can also be expressed using only bit arithmetic: M(i, j) = bit_reverse(bit_interleave(bitwise_xor(i, j), i)) / n ^ 2 == Pre-calculated threshold maps == Rather than storing the threshold map as a matrix of n {\displaystyle n} × n {\displaystyle n} integers from 0 to n 2 {\displaystyle n^{2}} , depending on the exact hardware used to perform the dithering, it may be beneficial to pre-calculate the thresholds of the map into a floating point format, rather than the traditional integer matrix format shown above. For this, the following formula can be used: Mpre(i,j) = Mint(i,j) / n^2 This generates a standard threshold matrix. for the 2×2 map: this creates the pre-calculated map: Additionally, normalizing the values to average out their sum to 0 (as done in the dithering algorithm shown below) can be done during pre-processing as well by subtracting 1⁄2 of the largest value from every value: Mpre(i,j) = Mint(i,j) / n^2 – 0.5 maxValue creating the pre-calculated map: == Algorithm == The ordered dithering algorithm renders the image normally, but for each pixel, it offsets its color value with a corresponding value from the threshold map according to its location, causing the pixel's value to be quantized to a different color if it exceeds the threshold. For most dithering purposes, it is sufficient to simply add the threshold value to every pixel (without performing normalization by subtracting 1⁄2), or equivalently, to compare the pixel's value to the threshold: if the brightness value of a pixel is less than the number in the corresponding cell of the matrix, plot that pixel black, otherwise, plot it white. This lack of normalization slightly increases the average brightness of the image, and causes almost-white pixels to not be dithered. This is not a problem when using a gray scale palette (or any palette where the relative color distances are (nearly) constant), and it is often even desired, since the human eye perceives differences in darker colors more accurately than lighter ones, however, it produces incorrect results especially when using a small or arbitrary palette, so proper normalization should be preferred. In other words, the algorithm performs the following transformation on each color c of every pixel: c ′ = n e a r e s t _ p a l e t t e _ c o l o r ( c + r × ( M ( x mod n , y mod n ) − 1 / 2 ) ) {\displaystyle c'=\mathrm {nearest\_palette\_color} {\mathopen {}}\left(c+r\times \left(M(x{\bmod {n}},y{\bmod {n}})-1/2\right){\mathclose {}}\right)} where M(i, j) is the threshold map on the i-th row and j-th column, c′ is the transformed color, and r is the amount of spread in color space. Assuming an RGB palette with 23N evenly distanced colors where each color (a triple of red, green and blue values) is represented by an octet from 0 to 255, one would typically choose r ≈ 255 N {\textstyle r\approx {\frac {255}{N}}} . (1⁄2 is again the normalizing term.) Because the algorithm operates on single pixels and has no conditional statements, it is very fast and suitable for real-time transformations. Additionally, because the location of the dithering patterns always stays the same relative to the display frame, it is less prone to jitter than error-diffusion methods, making it suitable for animations. Because the patterns are more repetitive than error-diffusion method, an image with ordered dithering compresses better. Ordered dithering is more suitable for line-art graphics as it will result in straighter lines and fewer anomalies. The values read from the threshold map should preferably scale into the same range as the minimal difference between distinct colors in the target palette. Equivalently, the size of the map selected should be equal to or larger than the ratio of source colors to target colors. For example, when quantizing a 24 bpp image to 15 bpp (256 colors per channel to 32 colors per channel), the smallest map one would choose would be 4×2, for the ratio of 8 (256:32). This allows expressing each distinct tone of the input with different dithering patterns. === A variable palette: pattern dithering === == Non-Bayer approaches == The above thresholding matrix approach describes the Bayer family of ordered dithering algorithms. A number of other algorithms are also known; they generally involve changes in the threshold matrix, which changes the distribution of the "noise" introduced by all kinds of dithering (the difference between the original image and the dithered image). === Halftone === Halftone dithering performs a form of clustered dithering, creating a look similar to halftone patterns, using a specially crafted matrix. === Void and cluster === The Void and cluster algorithm uses a pre-generated blue noise as the matrix for the dithering process. The blue noise matrix keeps the Bayer's good high frequency content, but with a more uniform coverage of all the frequencies involved shows a much lower amount of patterning. The "voids-and-cluster" method gets its name from the matrix generation procedure, where a black image with randomly initialized white pixels is gaussian-blurred to find the brightest and darkest parts, corresponding to voids and clusters. After a few swaps have evenly distributed the bright and dark parts, the pixels are numbered by importance. It takes significant computational resources to generate the blue noise matrix: on a modern computer a 64×64 matrix requires a couple seconds using the original algorithm. This algorithm can be extended to make animated dither masks which also consider the axis of time. This is done by running the algorithm in three dimensions and using a kernel which is a product of a two-dimensional gaussian kernel on the XY plane, and a one-dimensional Gaussian kernel on the Z axis. === Simulated Annealing === Simulated annealing can generate dither masks by starting with a flat histogram and swapping values to optimize a loss function. The loss function controls the spectral properties of the mask, allowing it to make blue noise or noise patterns meant to be filtered by specific filters. The algorithm can also be extended over time for animated dither masks with chosen temporal properties.

    Read more →
  • Softwarp

    Softwarp

    Softwarp is a software technique to warp an image so that it can be projected on a curved screen. This can be done in real time by inserting the softwarp as a last step in the rendering cycle. The problem is to know how the image should be warped to look correct on the curved screen. There are several techniques to auto calibrate the warping by projecting a pattern and using cameras and/or sensors. The information from the sensors is sent to the software so that it can analyze the data and calculate the curvature of the projection screen. == Usage == The softwarp can be used to project virtual views on curved walls and domes. These are usually used in vehicle simulators, for instance boat-, car- and airplane simulators. To make it possible to cover a dome with a 360 degree view you need to use several projectors. A problem with using several projectors on the same screen is that the edges between the projected images get about twice the amount of light. This is solved by using a technique called edge blending. With this technique a “filter” is inserted on the edge that fades the image from 100% light strength (luminance) to 0% (the lowest luminance depends on the contrast ratio of the projector). == History == The first warping technologies used a hardware image processing unit to warp the image. This processing unit was inserted between the graphics card and the projector. The problem with this technique is that it depends on the type of signal and the quality of the signal from the graphics card to warp it correctly. The process unit also needs several lines of image information before it can start sending out the warped image. This adds a latency to the display system that could be a problem in simulators that need fast response time, for instance fighter jet simulators. Softwarping eliminates the latency.

    Read more →
  • Pattern playback

    Pattern playback

    The pattern playback is an early talking device that was built by Dr. Franklin S. Cooper and his colleagues, including John M. Borst and Caryl Haskins, at Haskins Laboratories in the late 1940s and completed in 1950. There were several different versions of this hardware device. Only one currently survives. The machine converts pictures of the acoustic patterns of speech in the form of a spectrogram back into sound. Using this device, Alvin Liberman, Frank Cooper, and Pierre Delattre (later joined by Katherine Safford Harris, Leigh Lisker, and others) were able to discover acoustic cues for the perception of phonetic segments (consonants and vowels). This research was fundamental to the development of modern techniques of speech synthesis, reading machines for the blind, the study of speech perception and speech recognition, and the development of the motor theory of speech perception. To create sound, the pattern playback machine uses an arc light source which is directed against a rotating disk with 50 concentric tracks whose transparencies vary systematically in order to produce 50 harmonics of a fundamental frequency. The light is further projected against a spectrogram, whose reflectance corresponds to the sound pressure level of the partial of the signal, and is then directed towards a photovoltaic cell by which the light variation is converted into sound pressure variations. The pattern playback was last used in an experimental study by Robert Remez in 1976. The pattern playback now resides in the Museum at Haskins Laboratories in New Haven, Connecticut. The technique of pattern playback also now refers, more generally, to algorithms or techniques for converting spectrograms, cochleagrams, and correlograms from pictures back into sounds. A demonstration is in the TV show Adventure. Pioneering technology in psycholinguistics (CBS Television. 1953). == Digital pattern playback == In the 1970s, digital pattern playbacks began to supplant the earlier version. An early prototype was developed by Patrick Nye, Philip Rubin, and colleagues at Haskins Laboratories. It combined a "Ubiquitous Spectrum Analyzer"[1] for automatic spectral analysis, along with a VAX GT-40 display processor for graphic manipulation of the displayed spectrogram, a form of "synthesis by art", and subsequent re-synthesis using a 40 channel filter bank. This hybrid hardware/software digital pattern playback was eventually replaced at Haskins Laboratories by the HADES analysis and display system, designed by Philip Rubin, and implemented in Fortran on the VAX family of computers. A more modern version has been described by Arai and colleagues [2]. An on-line demonstration is available [3].

    Read more →
  • Concept drift

    Concept drift

    In predictive analytics, data science, machine learning and related fields, concept drift or drift is an evolution of data that invalidates the data model. It happens when the statistical properties of the target variable, which the model is trying to predict, change over time in unforeseen ways. This causes problems because the predictions become less accurate as time passes. Drift detection and drift adaptation are of paramount importance in the fields that involve dynamically changing data and data models. == Predictive model decay == In machine learning and predictive analytics this drift phenomenon is called concept drift. In machine learning, a common element of a data model are the statistical properties, such as probability distribution of the actual data. If they deviate from the statistical properties of the training data set, then the learned predictions may become invalid, if the drift is not addressed. == Data configuration decay == Another important area is software engineering, where three types of data drift affecting data fidelity may be recognized. Changes in the software environment ("infrastructure drift") may invalidate software infrastructure configuration. "Structural drift" happens when the data schema changes, which may invalidate databases. "Semantic drift" is changes in the meaning of data while the structure does not change. In many cases this may happen in complicated applications when many independent developers introduce changes without proper awareness of the effects of their changes in other areas of the software system. For many application systems, the nature of data on which they operate are subject to changes for various reasons, e.g., due to changes in business model, system updates, or switching the platform on which the system operates. In the case of cloud computing, infrastructure drift that may affect the applications running on cloud may be caused by the updates of cloud software. There are several types of detrimental effects of data drift on data fidelity. Data corrosion is passing the drifted data into the system undetected. Data loss happens when valid data are ignored due to non-conformance with the applied schema. Squandering is the phenomenon when new data fields are introduced upstream in the data processing pipeline, but somewhere downstream these data fields are absent. == Inconsistent data == "Data drift" may refer to the phenomenon when database records fail to match the real-world data due to the changes in the latter over time. This is a common problem with databases involving people, such as customers, employees, citizens, residents, etc. Human data drift may be caused by unrecorded changes in personal data, such as place of residence or name, as well as due to errors during data input. "Data drift" may also refer to inconsistency of data elements between several replicas of a database. The reasons can be difficult to identify. A simple drift detection is to run checksum regularly. However the remedy may be not so easy. == Examples == The behavior of the customers in an online shop may change over time. For example, if weekly merchandise sales are to be predicted, and a predictive model has been developed that works satisfactorily. The model may use inputs such as the amount of money spent on advertising, promotions being run, and other metrics that may affect sales. The model is likely to become less and less accurate over time – this is concept drift. In the merchandise sales application, one reason for concept drift may be seasonality, which means that shopping behavior changes seasonally. Perhaps there will be higher sales in the winter holiday season than during the summer, for example. Concept drift generally occurs when the covariates that comprise the data set begin to explain the variation of your target set less accurately — there may be some confounding variables that have emerged, and that one simply cannot account for, which renders the model accuracy to progressively decrease with time. Generally, it is advised to perform health checks as part of the post-production analysis and to re-train the model with new assumptions upon signs of concept drift. == Possible remedies == To prevent deterioration in prediction accuracy because of concept drift, reactive and tracking solutions can be adopted. Reactive solutions retrain the model in reaction to a triggering mechanism, such as a change-detection test or control charts from statistical process control, to explicitly detect concept drift as a change in the statistics of the data-generating process. When concept drift is detected, the current model is no longer up-to-date and must be replaced by a new one to restore prediction accuracy. A shortcoming of reactive approaches is that performance may decay until the change is detected. Tracking solutions seek to track the changes in the concept by continually updating the model. Methods for achieving this include online machine learning, frequent retraining on the most recently observed samples, and maintaining an ensemble of classifiers where one new classifier is trained on the most recent batch of examples and replaces the oldest classifier in the ensemble. Contextual information, when available, can be used to better explain the causes of the concept drift: for instance, in the sales prediction application, concept drift might be compensated by adding information about the season to the model. By providing information about the time of the year, the rate of deterioration of your model is likely to decrease, but concept drift is unlikely to be eliminated altogether. This is because actual shopping behavior does not follow any static, finite model. New factors may arise at any time that influence shopping behavior, the influence of the known factors or their interactions may change. Concept drift cannot be avoided for complex phenomena that are not governed by fixed laws of nature. All processes that arise from human activity, such as socioeconomic processes, and biological processes are likely to experience concept drift. Therefore, periodic retraining, also known as refreshing, of any model is necessary. === Remedy methods === DDM (Drift Detection Method): detects drift by monitoring the model's error rate over time. When the error rate passes a set threshold, it enters a warning phase, and if it passes another threshold, it enters a drift phase. EDDM (Early Drift Detection Method): improves DDM's detection rate by tracking the average distance between two errors instead of only the error rate. ADWIN (Adaptive Windowing): dynamically stores a window of recent data and warns the user if it detects a significant change between the statistics of the window's earlier data compared to more recent data. KSWIN (Kolmogorov–Smirnov Windowing): detects drift based on the Kolmogorov-Smirnov statistical test. DDM and EDDM: Concept Drift Detection online supervised methods that rely on sequential error monitoring to estimate the evolving error rate. ADWIN and KSWIN: Windowing maintain a "window", a subset of the most recent data, of the data stream, which it checks for statistical differences across the window. == Applications in security == Concept drift is a recurring issue in security analytics, especially in malware and intrusion detection. In these systems, models are often trained on past logs, binaries or network traces, but the behaviour of attackers changes over time as new malware families, obfuscation techniques and campaigns appear. When the data no longer resemble the training set, the decision boundaries learned by classifiers or anomaly detectors can become misaligned with the current threat landscape and detection performance can drop unless the models are updated or replaced. Several studies on Windows malware model detection as an evolving data stream and track how performance changes as time passes. They show that classifiers trained on a fixed time window can perform well on nearby data but deteriorate quickly when evaluated on samples collected months or years later, even when large amounts of training data are available. In order to keep up with this, security systems often use sliding or adaptive windows, which restrict training to the most recent portion of the data so that older, less relevant examples are gradually discarded. They also employ drift detectors such as ADWIN and KSWIN that monitor error rates or changes in the distribution of recent observations and signal when the statistics of the incoming stream differ significantly from the past, prompting retraining or model replacement. Related problems appear in spam filtering, fraud detection and intrusion detection, where adversaries change content, patterns of activity or network behavior to evade models trained on historical data. In these settings drift can be gradual, as new types of spam or fraud emerge, or abrupt, after a sudden shift in attack techniques. Common strategies to remain eff

    Read more →
  • Evolutionary robotics

    Evolutionary robotics

    Evolutionary robotics is an embodied approach to Artificial Intelligence (AI) in which robots are automatically designed using Darwinian principles of natural selection. The design of a robot, or a subsystem of a robot such as a neural controller, is optimized against a behavioral goal (e.g. run as fast as possible). Usually, designs are evaluated in simulations as fabricating thousands or millions of designs and testing them in the real world is prohibitively expensive in terms of time, money, and safety. An evolutionary robotics experiment starts with a population of randomly generated robot designs. The worst performing designs are discarded and replaced with mutations and/or combinations of the better designs. This evolutionary algorithm continues until a prespecified amount of time elapses or some target performance metric is surpassed. Evolutionary robotics methods are particularly useful for engineering machines that must operate in environments in which humans have limited intuition (nanoscale, space, etc.). Evolved simulated robots can also be used as scientific tools to generate new hypotheses in biology and cognitive science, and to test old hypothesis that require experiments that have proven difficult or impossible to carry out in reality. == History == In the early 1990s, two separate European groups demonstrated different approaches to the evolution of robot control systems. Dario Floreano and Francesco Mondada at EPFL evolved controllers for the Khepera robot. Adrian Thompson, Nick Jakobi, Dave Cliff, Inman Harvey, and Phil Husbands evolved controllers for a Gantry robot at the University of Sussex. However the body of these robots was presupposed before evolution. The first simulations of evolved robots were reported by Karl Sims and Jeffrey Ventrella of the MIT Media Lab, also in the early 1990s. However these so-called virtual creatures never left their simulated worlds. The first evolved robots to be built in reality were 3D-printed by Hod Lipson and Jordan Pollack at Brandeis University at the turn of the 21st century.

    Read more →
  • Eaze

    Eaze

    Eaze is an American company based in San Francisco, California that launched a medical cannabis delivery app of the same name in 2014. == History == Eaze was launched in 2014 by Keith McCarty to deliver medical marijuana to patients in California. McCarty started the company in his San Francisco apartment with four employees. The company provides a mobile app to connect users with cannabis dispensaries, but does not grow or sell marijuana itself, and has been nicknamed “the Uber of Weed”. As of 2017, the company operates in more than 100 cities within California. In 2017, Eaze reported 300 percent growth over the previous year. It has 81 employees, and performs 120,000 deliveries per month to 250,000 users. A survey of Eaze users revealed that 66% are male, 57% are between 22 and 34, just over half have a bachelor's degree, and 49% have an annual income over $75,000. The company's vaporizer cartridge sales reached $1 million in sales in 4 months, and 31% of customers had ordered a vaporizer by the end of 2016. In 2016, Eaze founder Keith McCarty stepped down from his position as CEO and was replaced by Jim Patterson, who served as the company's chief product and technology officer. == EazeMD == EazeMD is a service that helps people acquire a medical marijuana card. It is a California-based telemedicine service in which physicians assess patients through an online video chat. It is California's largest telemedicine service for marijuana referrals. In June 2017, a former employee of one of these physicians accessed patient data in the physician's records system, causing a security breach. However, there was no evidence that Eaze data was accessed. == Eaze Insights == Eaze Insights conducts surveys of their users and compiles data into reports on cannabis use. Statistics from their reports have been cited in Seattle Weekly, Forbes, The Huffington Post, Business Insider, Fortune, and other general interest publications. == Financing == The company announced its $10 million Series A funding in April 2015 by multiple venture capital firms, including the Snoop Dogg-backed Casa Verde Capital. In October 2016, Eaze announced its series B funding in the amount of $13 million from five investors, making the company "the highest-funded startup in the history of the cannabis industry, as well as its fastest-growing one". In September 2017, the company raised another $27 million in venture funding. The Series B funding was led by Bailey Capital, joined by DCM Ventures, Kaya Ventures, and FJ Labs. According to the company' officials in 2017, Eaze managed to raise more than $52 million since its inception in 2014.

    Read more →
  • Luminance HDR

    Luminance HDR

    Luminance HDR, formerly Qtpfsgui, is graphics software used for the creation and manipulation of high-dynamic-range images. Released under the terms of the GPL, it is available for Linux, Microsoft Windows, and Mac OS X (Intel only). Luminance HDR supports several High Dynamic Range (HDR) as well as Low Dynamic Range (LDR) file formats. == Functionality == Prerequisite of HDR photography are several narrow-range digital images with different exposures. Luminance HDR combines these images and calculates a high-contrast image. In order to view this image on a regular computer monitor, Luminance HDR can convert it into a displayable LDR image format using a variety of methods, such as tone mapping. Currently fifteen different tone mapping operators (algorithms) are available, each one with its tunable parameters. Different image processing techniques can be applied to the generated HDR images, such as resizing, cropping, rotating and a number of projective transformations. The software also provides batch processing functionality for creating HDR images and for tone mapping them in a non-interactive way. A module for copying Exif data among sets of images is also provided. For users who prefers the command line, a non-GUI, non-graphical interface is also available on all supported platforms. A common problem with HDR photography is that images need to be aligned exactly. If the subject is static, this can be achieved using a tripod or a stable surface on which the camera is placed. In the case of image data that does not align exactly, an automatic alignment can be performed using a tool provided by the Hugin project. If this automation doesn't provide the desired result, the user may improve it manually. == Supported formats == HDR images are images with a high dynamic range and, using Luminance HDR, they can be created as well as edited. The following HDR graphic formats are supported: OpenEXR Radiance HDR Tag Image File Format (TIFF) Format: 16 Bit, 32 Bit (Float) and LogLuv Raw PFS native Luminance HDR can create an HDR image from several LDR images and tonemap an HDR into an LDR. The following LDR formats are supported: JPG PNG Portable Pixmap (PPM) Portable Bitmap (PBM) TIFF (8 Bit)

    Read more →
  • MeituPic

    MeituPic

    Meitu Xiu Xiu ("Meitu") (Chinese: 美图秀秀) is an image editing software that is mostly used in Mainland China but is also popular in Hong Kong and Taiwan. It is only available on Google Play and App Store in certain countries. It provides tools for editing photos: filters, retouching, collage, scenes, frames, and photo decorations, as well as generative AI features such as text-to-images, AI removal and AI repainting etc. Meitu is one of the apps developed by Meitu, Inc.; it also produced BeautyCam, Wink and X-Design. == History == Meitu's PC version was created in 2008 by Wu Xinhong, the CEO of Meitu. In 2013, its mobile version became one of the first must-have mobile apps in China. Meitu, Inc. is a photo and video-centered app developer, which was founded in 2008 in Xiamen. Currently, the major revenue source of Meitu is premium subscription. Meitu, Inc. was initially funded by Cai Wensheng, a well-known angel investor. The company has an approximately 250 million monthly active users globally. == Function == === Edit === MeituPic provides a number of photo-editing tools. The major functions are auto enhance, edit, enhance, filters, frames, magic brush, mosaic, text, and blur. Auto enhance focuses on the nature of photos taken, while Edit includes functions of cropping, rotation, sharpening, and adjustment of ratio. For Enhance, users can apply slight adjustment on the photo by controlling the levels of brightness, contrast, colour temperature, saturation, highlight, shadow and smart light. Major types of filters are LOMO, beauty, style as well as art. Different frames can be chosen from poster, simple, and fantasy. Magic brush provides a great variety of brushes with different colours and patterns for users to decorate the photos. Mosaic brush enables users to cover certain parts of the photo. Texts can be added to the photo. Choices of different bubbles, font as well as style of words are available. Blurring effect is also available to make the photo less distinct and clear. === Beauty Retouch === There are seven major functions for retouching a photo: automatic retouch, smooth and whiten skin, remove blemish, make slimmer, remove dark circles and bags under the eyes, make taller, and enhance the eyes. Automatic retouch enhances portraits by lightening the skin tone, brightening the eyes, and simulating a face-lift by tapping on just one button. This helps to remove wrinkles and optimizes the skin tone. Acne, blemishes, and other skin imperfections can also be removed. The face-lift and weight-loss functions in the slimming option can be used to reshape the body. The option to make the subject taller can be used to change the perceived height of the subject and give the impression of slimmer, longer legs. The option to enhance the eyes can enlarge and brighten the eyes. === Collage === Collage has four types: template, freestyle, poster, PicStrip, which all maximize to insert nine photos. Template integrates photos in a vertical rectangle tightly. MeituPic has 15 frames or free download function for users. MeituPic also provides different templates according to number of photos inserted. Freestyle separates photos on a background freely. There are two parts of background: custom and more. For custom, users choose from album. For more, there are plain and picture with 18 choices. Poster makes a poster with photos. Users choose a poster among 8 choices or tap ‘more’ to download a new one. PicStrip combines photos vertically making an elongated file. Users choose a frame from 15 choices. Pinching thumb and forefinger together or apart zooms photos in/out. Putting two fingers and turning hand rotates photos. Pressing moves photos to ideal location. After designing, users tap ‘save/share’ on the upper right corner and the photo made is saved into album automatically. == Awards ==

    Read more →
  • Robomart

    Robomart

    Robomart is an American technology company headquartered in Santa Monica, California that builds autonomous smart shops for cafes, ice cream parlors, and quick-service restaurants. The company’s white label platform gives retailers the option to expand their footprint at a significantly lower cost than traditional brick-and-mortar real-estate. Robomarts are equipped with a proprietary checkout-free system, temperature controlled compartments, sensors for autonomous operation, and external cameras for added security. The company licenses its technology and white label applications to retailers who manage their fleet of stores and deploy them to their consumers’ locations. After consumers have taken goods from the robomart, their order is automatically calculated, their card on file is charged and they are sent a receipt. The company has announced partnerships with Unilever, Mars, and Fatty Mart. == History == Robomart was founded by Ali Ahmed, Tigran Shahverdyan, and Emad Suhail Rahim. The company debuted at CES 2018 where it unveiled its concept of a self-driving store. At GITEX 2018 the company presented its first functional prototype of a fully driverless Robomart. At the 2019 Consumer Electronics Show the company demonstrated the technology behind its autonomous stores and checkout-free shopping experience. In January 2019, Robomart announced its first partnership with U.S. grocery chain Stop & Shop to test its driverless stores. In December 2020, Robomart deployed the Pharmacy Robomart in a trial in West Hollywood. In June 2021, the company launched its commercial service with a fleet of Pharmacy and Snacks Robomarts operating within West Hollywood and Central Hollywood. In August 2023, Robomart announced a $2 million seed round, putting its to-date funding at $3.4 million. == Partnerships == In September 2019, Robomart partnered with Avery Dennison to source the RFID tags used to enable its checkout-free shopping experience. In December 2020, Robomart partnered with Zeeba Vans to provide vehicles for its growing fleet. In June 2021, Robomart partnered with REEF Technology to provide inventory management and restocking services. In addition, REEF's Light Speed grocery division serves as the first merchant selling products through Robomart. == Products == The company currently offers three Robomart types. The frozen Robomart that stocks ice cream, the refrigerated Robomart that stocks perishable foods, and the ambient Robomart that stocks shelf-stable goods.

    Read more →
  • Pixel shift

    Pixel shift

    Pixel shift is a method in digital cameras for producing a super-resolution image. The method works by taking several images, after each such capture moving ("shifting") the sensor to a new position. In digital colour cameras that employ pixel shift, this avoids a major limitation inherent in using Bayer pattern for obtaining colour, and instead produces an image with increased colour resolution and, assuming a static subject or additional computational steps, an image free of colour moiré. Taking this idea further, sub-pixel shifting may increase the resolution of the final image beyond that suggested by the specified resolution of the image sensor. Additionally, assuming that the various individual captures are taken at the same sensitivity, the final combined image will have less image noise than a single capture. This can be thought of as an averaging effect (for instance, in a pixel shift image composed of four individual frames with a classic Bayer pattern, every pixel in the final colour image is based on two measurements of the green channel). == List of cameras implementing pixel shift == All of the following cameras are fabricated with one imaging sensor, thus any kind of pixel shift requires a movement of the whole sensor. === Canon === Canon R5: Contains a 45 Mpixel sensor. The High-Resolution Mode shifts the sensor by one pixel to obtain a sequence of nine images that are merged into a 400 Mpixel image. === Fujifilm === Fujifilm GFX50S II: contains a 51 Mpixel sensor. The Pixel Shift Multi-Shot mode shifts the imaging sensor by 0.5-pixel movements to obtain a sequence of 16 images that are subsequently merged into a 200 Mpixel image. Fujifilm GFX100, Fujifilm GFX100 II: contains a 102 Mpixel sensor. A sequence of 16 pixel shifted images are merged into a 400 Mpixel image. Fujifilm GFX100S, Fujifilm GFX100S II: contains a 102 Mpixel sensor. A sequence of 16 pixel shifted images are merged into a 400 Mpixel image Fujifilm GFX100IR: contains a 102 Mpixel sensor. A sequence of 16 pixel shifted images are merged into a 400 Mpixel image Fujifilm X-H2: contains a 40 Mpixel sensor. A sequence of 20 shifted images are merged into a 160 Mpixel image. Fujifilm X-T5: contains a 40 Mpixel sensor. A sequence of 20 shifted images are merged into a 160 Mpixel image. === Nikon === Nikon Z8: contains a 47.5 Mpixel sensor. The High Res shot mode shifts the imaging sensor by 0.5-pixel movements to obtain a sequence of up to 32 images that can be merged in Nikon's NX studio software. Nikon Zf: contains a 24 Mpixel sensor. The High Res shot mode shifts the imaging sensor by 0.5-pixel movements to obtain a sequence of up to 32 images that can be merged in Nikon's NX studio software. === Olympus === Olympus OM-D E-M1 Mark II: contains a 20.4 Mpixel sensor. The High Res shot mode produces a 50 Mpixel image. Olympus OM-D E-M5 Mark II: contains a 16 Mpixel sensor. The High Res shot mode shifts the imaging sensor by 0.5-pixel movements to obtain a sequence of 8 images that are subsequently merged into a 40 Mpixel image. Olympus OM-D E-M5 Mark III: contains a 20.4 Mpixel sensor. The High Res shot mode shifts the imaging sensor by 0.5-pixel movements to obtain a sequence of 8 images that are subsequently merged into a 50 Mpixel image. Olympus OM-D E-M1X: contains a 20.4 Mpixel sensor. The camera sports two pixel shift mode: (a) the 80Mp Tripod mode produces an 80 Mpixel image, (b) the Handheld High Res shot mode produces a 50 Mpixel image. Olympus PEN-F: contains a 20.4 Mpixel sensor. The High Res Shot mode takes multiple images, continually shifting the position of the sensor in sub-pixel increments. Combining these images results in either a 50MP JPEG or an 80MP Raw file. ==== OM System ==== OM System OM-1: contains a 20MPix sensor. The High Res Shot mode takes multiple images, and it can be used handheld or on a tripod. Handheld it will internally produce 50 Mpix files and 80 Mpix when mounted on a tripod. OM System OM-5: contains a 20MPix sensor. The High Res Shot mode takes multiple images, and it can be used handheld or on a tripod. Handheld it will internally produce 50 Mpix files and 80 Mpix when mounted on a tripod. === Panasonic === Panasonic Lumix DC-G9: contains a 20.3 Mpixel sensor. The High Resolution Mode takes a sequence of 8 shots in quick succession between which the sensor is shifted by 0.5 pixel for each image. These are subsequently merged into an 80 Mpixel image. Panasonic Lumix DC-S1: contains a 24.2 Mpixel sensor. The High Resolution Mode takes a sequence of shots in quick succession between which the sensor is shifted by a small amount. These are subsequently merged into a 96 Mpixel image. Panasonic Lumix DC-S1R: contains a 47.3 Mpixel sensor. The High Resolution Mode shifts the imaging sensor by a small increments to obtain a sequence of 8 images that are subsequently merged into a 187 Mpixel image. Panasonic Lumix DC-S1H Panasonic Lumix DC-S5 === Pentax === Pentax K-70: contains a 24.3 Mpixel sensor. The pixel shift mode takes a sequence of 4 shots between which the sensor is shifted by 1 pixel. These are subsequently merged into an image sporting 'all color data in each pixel to deliver super-high-resolution images'. Pentax KP: contains a 24.3 Mpixel sensor. The pixel shift mode takes a sequence of 4 shots between which the sensor is shifted by 1 pixel. These are subsequently merged into an image sporting 'high-resolution images with more accurate colours and much finer details'. Pentax K-3 II: contains a 24.3 Mpixel sensor. The pixel shift mode takes a sequence of 4 shots between which the sensor is shifted by 1 pixel. These are subsequently merged into an image sporting 'super-high-resolution images with far more truthful color reproduction and much finer details'. Pentax K-3 III: contains a 25.7 Mpixel sensor. The pixel shift mode takes a sequence of 4 shots between which the sensor is shifted by 1 pixel. These are subsequently merged into an image sporting 'a cancelling out of the Bayer pattern and removal of the need for sharpness-sapping demosaicing'. Pentax K-1: contains a 36.4 Mpixel sensor. The pixel shift mode takes a sequence of 4 shots between which the sensor is shifted by 1 pixel. These are subsequently merged into an image sporting 'improved detail and colour resolution'. Pentax K-1 II: contains a 36.4 Mpixel sensor. The camera sports two pixel shift mode: (a) a series of 4 tripod-stabilised images shifted by 1 pixel each are subsequently combined into a 47.3 Mpixel image, (b) a series of images taken in handheld mode are combined into a 47.3 Mpixel image that is, within limits, able to cope even with moving subjects. === Sony === Sony a6600: contains a 24.3 Mpixel sensor. The pixel shift mode takes a sequence of 4 shots between which the sensor is shifted by 1 pixel. These are subsequently merged into an image sporting 'all color data in each pixel to deliver super-high-resolution images'. Sony α7R III: contains a 42.4 Mpixel sensor. The pixel shift mode takes a sequence of 4 shots between which the sensor is shifted by 1 pixel. These are subsequently merged into a 42.4 Mpixel image with improved tonal resolution. Sony α7R IV: contains a 61 Mpixel sensor. The camera has two pixel shift modes, (a) the first takes a sequence of 4 shots between which the sensor is shifted by 1 pixel. These are subsequently merged into a 61 Mpixel image with improved tonal resolution, (b) the other takes a sequence of 16 shots between which the sensor is shifted by 0.5 pixel. These are subsequently merged into a 240 Mpixel image with both enhanced detail and improved tonal resolution. Sony α1: contains a 50 Mpixel sensor. The camera has two pixel shift modes, (a) the first takes a sequence of 4 shots between which the sensor is shifted by 1 pixel. These are subsequently merged into a 50 Mpixel image with improved tonal resolution, (b) the other takes a sequence of 16 shots between which the sensor is shifted by 0.5 pixel. These are subsequently merged into a 200 Mpixel image with both enhanced detail and improved tonal resolution. === Hasselblad === Hasselblad H3DII: the model H3DII-39 sports a 39 Mpixel sensor, the model H3DII-50 a 50 Mpixel sensor. Both enable a pixel shift mode which takes a sequence of 4 shots between which the sensor is shifted by 1 pixel. These are subsequently merged into a single image. Hasselblad H4D series: the model H4D-200MS contains a 50 Mpixel sensor. The sensor sports 3 different pixel shift modes which take (a) a sequence of 6 shots taken at slight offsets, (b) a sequence of 4 shots between which the sensor is shifted by 1 pixel, (c) a sequence of 4 shots between which the sensor is shifted by 0.5 pixels. Images obtained by all three modes are subsequently merged into 200 Mpixel images. Hasselblad H5D series: both models H5D-50c MS and H5D-200c MS contain a 50 Mpixel sensor. This sensor sports 2 different pixel shift modes which take (a) a sequence of 6 shots with full and half pixel moveme

    Read more →