AI Art Detector

AI Art Detector — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Exposure Notification

  The (Google/Apple) Exposure Notification System (GAEN) is a framework and protocol specification developed by Apple Inc. and Google to facilitate digital contact tracing during the COVID-19 pandemic. When used by health authorities, it augments more traditional contact tracing techniques by automatically logging close approaches among notification system users using Android or iOS smartphones. Exposure Notification is a decentralized reporting protocol built on a combination of Bluetooth Low Energy technology and privacy-preserving cryptography. It is an opt-in feature within COVID-19 apps developed and published by authorized health authorities. Unveiled on April 10, 2020, it was made available on iOS on May 20, 2020, as part of the iOS 13.5 update and on December 14, 2020, as part of the iOS 12.5 update for older iPhones. On Android, it was added to devices via a Google Play Services update, supporting all versions since Android Marshmallow. The Apple/Google protocol is similar to the Decentralized Privacy-Preserving Proximity Tracing (DP-3T) protocol created by the European DP-3T consortium and the Temporary Contact Number (TCN) protocol by Covid Watch, but is implemented at the operating system level, which allows for more efficient operation as a background process. Since May 2020, a variant of the DP-3T protocol is supported by the Exposure Notification Interface. Other protocols are constrained in operation because they are not privileged over normal apps. This leads to issues, particularly on iOS devices where digital contact tracing apps running in the background experience significantly degraded performance. The joint approach is also designed to maintain interoperability between Android and iOS devices, which constitute nearly all of the market. The ACLU stated the approach "appears to mitigate the worst privacy and centralization risks, but there is still room for improvement". In late April, Google and Apple shifted the emphasis of the naming of the system, describing it as an "exposure notification service", rather than "contact tracing" system. == Technical specification == Digital contact tracing protocols typically have two major responsibilities: encounter logging and infection reporting. Exposure Notification only involves encounter logging which is a decentralized architecture. The majority of infection reporting is centralized in individual app implementations. To handle encounter logging, the system uses Bluetooth Low Energy to send tracking messages to nearby devices running the protocol to discover encounters with other people. The tracking messages contain unique identifiers that are encrypted with a secret daily key held by the sending device. These identifiers change every 15–20 minutes as well as Bluetooth MAC address in order to prevent tracking of clients by malicious third parties through observing static identifiers over time. The sender's daily encryption keys are generated using a random number generator. Devices record received messages, retaining them locally for 14 days. If a user tests positive for infection, the last 14 days of their daily encryption keys can be uploaded to a central server, where it is then broadcast to all devices on the network. The method through which daily encryption keys are transmitted to the central server and broadcast is defined by individual app developers. The Google-developed reference implementation calls for a health official to request a one-time verification code (VC) from a verification server, which the user enters into the encounter logging app. This causes the app to obtain a cryptographically signed certificate, which is used to authorize the submission of keys to the central reporting server. The received keys are then provided to the protocol, where each client individually searches for matches in their local encounter history. If a match meeting certain risk parameters is found, the app notifies the user of potential exposure to the infection. Google and Apple intend to use the received signal strength (RSSI) of the beacon messages as a source to infer proximity. RSSI and other signal metadata will also be encrypted to resist deanonymization attacks. === Version 1.0 === To generate encounter identifiers, first a persistent 32-byte private Tracing Key ( t k {\displaystyle tk} ) is generated by a client. From this a 16 byte Daily Tracing Key is derived using the algorithm d t k i = H K D F ( t k , N U L L , 'CT-DTK' | | D i , 16 ) {\displaystyle dtk_{i}=HKDF(tk,NULL,{\text{'CT-DTK'}}||D_{i},16)} , where H K D F ( Key, Salt, Data, OutputLength ) {\displaystyle HKDF({\text{Key, Salt, Data, OutputLength}})} is a HKDF function using SHA-256, and D i {\displaystyle D_{i}} is the day number for the 24-hour window the broadcast is in starting from Unix Epoch Time. These generated keys are later sent to the central reporting server should a user become infected. From the daily tracing key a 16-byte temporary Rolling Proximity Identifier is generated every 10 minutes with the algorithm R P I i , j = Truncate ( H M A C ( d t k i , 'CT-RPI' | | T I N j ) , 16 ) {\displaystyle RPI_{i,j}={\text{Truncate}}(HMAC(dtk_{i},{\text{'CT-RPI'}}||TIN_{j}),16)} , where H M A C ( Key, Data ) {\displaystyle HMAC({\text{Key, Data}})} is a HMAC function using SHA-256, and T I N j {\displaystyle TIN_{j}} is the time interval number, representing a unique index for every 10 minute period in a 24-hour day. The Truncate function returns the first 16 bytes of the HMAC value. When two clients come within proximity of each other they exchange and locally store the current R P I i , j {\displaystyle RPI_{i,j}} as the encounter identifier. Once a registered health authority has confirmed the infection of a user, the user's Daily Tracing Key for the past 14 days is uploaded to the central reporting server. Clients then download this report and individually recalculate every Rolling Proximity Identifier used in the report period, matching it against the user's local encounter log. If a matching entry is found, then contact has been established and the app presents a notification to the user warning them of potential infection. === Version 1.1 === Unlike version 1.0 of the protocol, version 1.1 does not use a persistent tracing key, rather every day a new random 16-byte Temporary Exposure Key ( t e k i {\displaystyle tek_{i}} ) is generated. This is analogous to the daily tracing key from version 1.0. Here i {\displaystyle i} denotes the time is discretized in 10 minute intervals starting from Unix Epoch Time. From this two 128-bit keys are calculated, the Rolling Proximity Identifier Key ( R P I K i {\displaystyle RPIK_{i}} ) and the Associated Encrypted Metadata Key ( A E M K i {\displaystyle AEMK_{i}} ). R P I K i {\displaystyle RPIK_{i}} is calculated with the algorithm R P I K i = H K D F ( t e k i , N U L L , 'EN-RPIK' , 16 ) {\displaystyle RPIK_{i}=HKDF(tek_{i},NULL,{\text{'EN-RPIK'}},16)} , and A E M K i {\displaystyle AEMK_{i}} using the algorithm A E M K i = H K D F ( t e k i , N U L L , 'EN-AEMK' , 16 ) {\displaystyle AEMK_{i}=HKDF(tek_{i},NULL,{\text{'EN-AEMK'}},16)} . From these values a temporary Rolling Proximity Identifier ( R P I i , j {\displaystyle RPI_{i,j}} ) is generated every time the BLE MAC address changes, roughly every 15–20 minutes. The following algorithm is used: R P I i , j = A E S 128 ( R P I K i , 'EN-RPI' | | 0 x 000000000000 | | E N I N j ) {\displaystyle RPI_{i,j}=AES128(RPIK_{i},{\text{'EN-RPI'}}||{\mathtt {0x000000000000}}||ENIN_{j})} , where A E S 128 ( Key, Data ) {\displaystyle AES128({\text{Key, Data}})} is an AES cryptography function with a 128-bit key, the data is one 16-byte block, j {\displaystyle j} denotes the Unix Epoch Time at the moment the roll occurs, and E N I N j {\displaystyle ENIN_{j}} is the corresponding 10-minute interval number. Next, additional Associated Encrypted Metadata is encrypted. What the metadata represents is not specified, likely to allow the later expansion of the protocol. The following algorithm is used: Associated Encrypted Metadata i , j = A E S 128 _ C T R ( A E M K i , R P I i , j , Metadata ) {\displaystyle {\text{Associated Encrypted Metadata}}_{i,j}=AES128\_CTR(AEMK_{i},RPI_{i,j},{\text{Metadata}})} , where A E S 128 _ C T R ( Key, IV, Data ) {\displaystyle AES128\_CTR({\text{Key, IV, Data}})} denotes AES encryption with a 128-bit key in CTR mode. The Rolling Proximity Identifier and the Associated Encrypted Metadata are then combined and broadcast using BLE. Clients exchange and log these payloads. Once a registered health authority has confirmed the infection of a user, the user's Temporary Exposure Keys t e k i {\displaystyle tek_{i}} and their respective interval numbers i {\displaystyle i} for the past 14 days are uploaded to the central reporting server. Clients then download this report and individually recalculate every Rolling Proximity Identifier starting from interval number i {\displaystyle i} ,

  Read more →
• 

  Ensemble learning

  In statistics and machine learning, ensemble methods use multiple learning algorithms to obtain better predictive performance than could be obtained from any of the constituent learning algorithms alone. Unlike a statistical ensemble in statistical mechanics, which is usually infinite, a machine learning ensemble consists of only a concrete finite set of alternative models, but typically allows for much more flexible structure to exist among those alternatives. == Overview == Supervised learning algorithms search through a hypothesis space to find a suitable hypothesis that will make good predictions with a particular problem. Even if this space contains hypotheses that are very well-suited for a particular problem, it may be very difficult to find a good one. Ensembles combine multiple hypotheses to form one which should be theoretically better. Ensemble learning trains two or more machine learning algorithms on a specific classification or regression task. The algorithms within the ensemble model are generally referred as "base models", "base learners", or "weak learners" in literature. These base models can be constructed using a single modelling algorithm, or several different algorithms. The idea is to train a diverse set of weak models on the same modelling task, such that the outputs of each weak learner have poor predictive ability (i.e., high bias), and among all weak learners, the outcome and error values exhibit high variance. Fundamentally, an ensemble learning model trains at least two high-bias (weak) and high-variance (diverse) models to be combined into a better-performing model. The set of weak models — which would not produce satisfactory predictive results individually — are combined or averaged to produce a single, high performing, accurate, and low-variance model to fit the task as required. Ensemble learning typically refers to bagging (bootstrap aggregating), boosting or stacking/blending techniques to induce high variance among the base models. Bagging creates diversity by generating random samples from the training observations and fitting the same model to each different sample — also known as homogeneous parallel ensembles. Boosting follows an iterative process by sequentially training each base model on the up-weighted errors of the previous base model, producing an additive model to reduce the final model errors — also known as sequential ensemble learning. Stacking or blending consists of different base models, each trained independently (i.e. diverse/high variance) to be combined into the ensemble model — producing a heterogeneous parallel ensemble. Common applications of ensemble learning include random forests (an extension of bagging), Boosted Tree models, and Gradient Boosted Tree Models. Models in applications of stacking are generally more task-specific — such as combining clustering techniques with other parametric and/or non-parametric techniques. Evaluating the prediction of an ensemble typically requires more computation than evaluating the prediction of a single model. In one sense, ensemble learning may be thought of as a way to compensate for poor learning algorithms by performing a lot of extra computation. On the other hand, the alternative is to do a lot more learning with one non-ensemble model. An ensemble may be more efficient at improving overall accuracy for the same increase in compute, storage, or communication resources by using that increase on two or more methods, than would have been improved by increasing resource use for a single method. Fast algorithms such as decision trees are commonly used in ensemble methods (e.g., random forests), although slower algorithms can benefit from ensemble techniques as well. By analogy, ensemble techniques have been used also in unsupervised learning scenarios, for example in consensus clustering or in anomaly detection. == Ensemble theory == Empirically, ensembles tend to yield better results when there is a significant diversity among the models. Many ensemble methods, therefore, seek to promote diversity among the models they combine. Although perhaps non-intuitive, more random algorithms (like random decision trees) can be used to produce a stronger ensemble than very deliberate algorithms (like entropy-reducing decision trees). Using a variety of strong learning algorithms, however, has been shown to be more effective than using techniques that attempt to dumb-down the models in order to promote diversity. It is possible to increase diversity in the training stage of the model using correlation for regression tasks or using information measures such as cross entropy for classification tasks. Theoretically, one can justify the diversity concept because the lower bound of the error rate of an ensemble system can be decomposed into accuracy, diversity, and the other term. === The geometric framework === Ensemble learning, including both regression and classification tasks, can be explained using a geometric framework. Within this framework, the output of each individual classifier or regressor for the entire dataset can be viewed as a point in a multi-dimensional space. Additionally, the target result is also represented as a point in this space, referred to as the "ideal point." The Euclidean distance is used as the metric to measure both the performance of a single classifier or regressor (the distance between its point and the ideal point) and the dissimilarity between two classifiers or regressors (the distance between their respective points). This perspective transforms ensemble learning into a deterministic problem. For example, within this geometric framework, it can be proved that the averaging of the outputs (scores) of all base classifiers or regressors can lead to equal or better results than the average of all the individual models. It can also be proved that if the optimal weighting scheme is used, then a weighted averaging approach can outperform any of the individual classifiers or regressors that make up the ensemble or as good as the best performer at least. == Ensemble size == While the number of component classifiers of an ensemble has a great impact on the accuracy of prediction, there is a limited number of studies addressing this problem. A priori determining of ensemble size and the volume and velocity of big data streams make this even more crucial for online ensemble classifiers. Mostly statistical tests were used for determining the proper number of components. More recently, a theoretical framework suggested that there is an ideal number of component classifiers for an ensemble such that having more or less than this number of classifiers would deteriorate the accuracy. It is called "the law of diminishing returns in ensemble construction." Their theoretical framework shows that using the same number of independent component classifiers as class labels gives the highest accuracy. == Common types of ensembles == === Bayes optimal classifier === The Bayes optimal classifier is a classification technique. It is an ensemble of all the hypotheses in the hypothesis space. On average, no other ensemble can outperform it. The Naive Bayes classifier is a version of this that assumes that the data is conditionally independent on the class and makes the computation more feasible. Each hypothesis is given a vote proportional to the likelihood that the training dataset would be sampled from a system if that hypothesis were true. To facilitate training data of finite size, the vote of each hypothesis is also multiplied by the prior probability of that hypothesis. The Bayes optimal classifier can be expressed with the following equation: y = a r g m a x c j ∈ C ∑ h i ∈ H P ( c j | h i ) P ( T | h i ) P ( h i ) {\displaystyle y={\underset {c_{j}\in C}{\mathrm {argmax} }}\sum _{h_{i}\in H}{P(c_{j}|h_{i})P(T|h_{i})P(h_{i})}} where y {\displaystyle y} is the predicted class, C {\displaystyle C} is the set of all possible classes, H {\displaystyle H} is the hypothesis space, P {\displaystyle P} refers to a probability, and T {\displaystyle T} is the training data. As an ensemble, the Bayes optimal classifier represents a hypothesis that is not necessarily in H {\displaystyle H} . The hypothesis represented by the Bayes optimal classifier, however, is the optimal hypothesis in ensemble space (the space of all possible ensembles consisting only of hypotheses in H {\displaystyle H} ). This formula can be restated using Bayes' theorem, which says that the posterior is proportional to the likelihood times the prior: P ( h i | T ) ∝ P ( T | h i ) P ( h i ) {\displaystyle P(h_{i}|T)\propto P(T|h_{i})P(h_{i})} hence, y = a r g m a x c j ∈ C ∑ h i ∈ H P ( c j | h i ) P ( h i | T ) {\displaystyle y={\underset {c_{j}\in C}{\mathrm {argmax} }}\sum _{h_{i}\in H}{P(c_{j}|h_{i})P(h_{i}|T)}} === Bootstrap aggregating (bagging) === Bootstrap aggregation (bagging) involves training an ensemble on bootstrapped data sets. A bootstrapped set is cr

  Read more →
• 

  Farthest-first traversal

  In computational geometry, the farthest-first traversal of a compact metric space is a sequence of points in the space, where the first point is selected arbitrarily and each successive point is as far as possible from the set of previously-selected points. The same concept can also be applied to a finite set of geometric points, by restricting the selected points to belong to the set or equivalently by considering the finite metric space generated by these points. For a finite metric space or finite set of geometric points, the resulting sequence forms a permutation of the points, also known as the greedy permutation. Every prefix of a farthest-first traversal provides a set of points that is widely spaced and close to all remaining points. More precisely, no other set of equally many points can be spaced more than twice as widely, and no other set of equally many points can be less than half as far to its farthest remaining point. In part because of these properties, farthest-point traversals have many applications, including the approximation of the traveling salesman problem and the metric k-center problem. They may be constructed in polynomial time, or (for low-dimensional Euclidean spaces) approximated in near-linear time. == Definition and properties == A farthest-first traversal is a sequence of points in a compact metric space, with each point appearing at most once. If the space is finite, each point appears exactly once, and the traversal is a permutation of all of the points in the space. The first point of the sequence may be any point in the space. Each point p after the first must have the maximum possible distance to the set of points earlier than p in the sequence, where the distance from a point to a set is defined as the minimum of the pairwise distances to points in the set. A given space may have many different farthest-first traversals, depending both on the choice of the first point in the sequence (which may be any point in the space) and on ties for the maximum distance among later choices. Farthest-point traversals may be characterized by the following properties. Fix a number k, and consider the prefix formed by the first k points of the farthest-first traversal of any metric space. Let r be the distance between the final point of the prefix and the other points in the prefix. Then this subset has the following two properties: All pairs of the selected points are at distance at least r from each other, and All points of the metric space are at distance at most r from the subset. Conversely any sequence having these properties, for all choices of k, must be a farthest-first traversal. These are the two defining properties of a Delone set, so each prefix of the farthest-first traversal forms a Delone set. == Applications == Rosenkrantz, Stearns & Lewis (1977) used the farthest-first traversal to define the farthest-insertion heuristic for the travelling salesman problem. This heuristic finds approximate solutions to the travelling salesman problem by building up a tour on a subset of points, adding one point at a time to the tour in the ordering given by a farthest-first traversal. To add each point to the tour, one edge of the previous tour is broken and replaced by a pair of edges through the added point, in the cheapest possible way. Although Rosenkrantz et al. prove only a logarithmic approximation ratio for this method, they show that in practice it often works better than other insertion methods with better provable approximation ratios. Later, the same sequence of points was popularized by Gonzalez (1985), who used it as part of greedy approximation algorithms for two problems in clustering, in which the goal is to partition a set of points into k clusters. One of the two problems that Gonzalez solve in this way seeks to minimize the maximum diameter of a cluster, while the other, known as the metric k-center problem, seeks to minimize the maximum radius, the distance from a chosen central point of a cluster to the farthest point from it in the same cluster. For instance, the k-center problem can be used to model the placement of fire stations within a city, in order to ensure that every address within the city can be reached quickly by a fire truck. For both clustering problems, Gonzalez chooses a set of k cluster centers by selecting the first k points of a farthest-first traversal, and then creates clusters by assigning each input point to the nearest cluster center. If r is the distance from the set of k selected centers to the next point at position k + 1 in the traversal, then with this clustering every point is within distance r of its center and every cluster has diameter at most 2r. However, the subset of k centers together with the next point are all at distance at least r from each other, and any k-clustering would put some two of these points into a single cluster, with one of them at distance at least r/2 from its center and with diameter at least r. Thus, Gonzalez's heuristic gives an approximation ratio of 2 for both clustering problems. Gonzalez's heuristic was independently rediscovered for the metric k-center problem by Dyer & Frieze (1985), who applied it more generally to weighted k-center problems. Another paper on the k-center problem from the same time, Hochbaum & Shmoys (1985), achieves the same approximation ratio of 2, but its techniques are different. Nevertheless, Gonzalez's heuristic, and the name "farthest-first traversal", are often incorrectly attributed to Hochbaum and Shmoys. For both the min-max diameter clustering problem and the metric k-center problem, these approximations are optimal: the existence of a polynomial-time heuristic with any constant approximation ratio less than 2 would imply that P = NP. As well as for clustering, the farthest-first traversal can also be used in another type of facility location problem, the max-min facility dispersion problem, in which the goal is to choose the locations of k different facilities so that they are as far apart from each other as possible. More precisely, the goal in this problem is to choose k points from a given metric space or a given set of candidate points, in such a way as to maximize the minimum pairwise distance between the selected points. Again, this can be approximated by choosing the first k points of a farthest-first traversal. If r denotes the distance of the kth point from all previous points, then every point of the metric space or the candidate set is within distance r of the first k − 1 points. By the pigeonhole principle, some two points of the optimal solution (whatever it is) must both be within distance r of the same point among these first k − 1 chosen points, and (by the triangle inequality) within distance 2r of each other. Therefore, the heuristic solution given by the farthest-first traversal is within a factor of two of optimal. Other applications of the farthest-first traversal include color quantization (clustering the colors in an image to a smaller set of representative colors), progressive scanning of images (choosing an order to display the pixels of an image so that prefixes of the ordering produce good lower-resolution versions of the whole image rather than filling in the image from top to bottom), point selection in the probabilistic roadmap method for motion planning, simplification of point clouds, generating masks for halftone images, hierarchical clustering, finding the similarities between polygon meshes of similar surfaces, choosing diverse and high-value observation targets for underwater robot exploration, fault detection in sensor networks, modeling phylogenetic diversity, matching vehicles in a heterogenous fleet to customer delivery requests, uniform distribution of geodetic observatories on the Earth's surface or of other types of sensor network, generation of virtual point lights in the instant radiosity computer graphics rendering method, and geometric range searching data structures. == Algorithms == === Greedy exact algorithm === The farthest-first traversal of a finite point set may be computed by a greedy algorithm that maintains the distance of each point from the previously selected points, performing the following steps: Initialize the sequence of selected points to the empty sequence, and the distances of each point to the selected points to infinity. While not all points have been selected, repeat the following steps: Scan the list of not-yet-selected points to find a point p that has the maximum distance from the selected points. Remove p from the not-yet-selected points and add it to the end of the sequence of selected points. For each remaining not-yet-selected point q, replace the distance stored for q by the minimum of its old value and the distance from p to q. For a set of n points, this algorithm takes O(n2) steps and O(n2) distance computations. === Approximations === A faster approximation algorithm, given by Har-Peled & Mendel (2006), applie

  Read more →
• 

  Gaussian process emulator

  In statistics, Gaussian process emulator is one name for a general type of statistical model that has been used in contexts where the problem is to make maximum use of the outputs of a complicated (often non-random) computer-based simulation model. Each run of the simulation model is computationally expensive and each run is based on many different controlling inputs. The variation of the outputs of the simulation model is expected to vary reasonably smoothly with the inputs, but in an unknown way. The overall analysis involves two models: the simulation model, or "simulator", and the statistical model, or "emulator", which notionally emulates the unknown outputs from the simulator. The Gaussian process emulator model treats the problem from the viewpoint of Bayesian statistics. In this approach, even though the output of the simulation model is fixed for any given set of inputs, the actual outputs are unknown unless the computer model is run and hence can be made the subject of a Bayesian analysis. The main element of the Gaussian process emulator model is that it models the outputs as a Gaussian process on a space that is defined by the model inputs. The model includes a description of the correlation or covariance of the outputs, which enables the model to encompass the idea that differences in the output will be small if there are only small differences in the inputs.

  Read more →
• 

  Sprayprinter

  SprayPrinter is a device that attaches to aerosol paint cans whereby users can print images via Bluetooth from a smartphone onto a wall or almost any surface. == History == The technology behind SprayPrinter was developed by Mihkel Joala. He explained in a 2016 interview with New Atlas that his idea was inspired by the modern car engine and the Nintendo Wii console. "Engines nowadays use extremely fast valves to spray fuel to [the] combustion chamber," says Joala. "I realized I can use them to shoot paint with pinpoint accuracy." As of December 2021, the company appears to be no longer selling products. == Awards and Recognitions == In 2015, SprayPrinter received €8,000 from the Estonian prototyping contest Prototron for its initial prototype. In 2016, the SprayPrinter team won the grand prize of €30,000 from the televised pitching competition Ajujaht.

  Read more →
• 

  Tensor sketch

  In statistics, machine learning and algorithms, a tensor sketch is a type of dimensionality reduction that is particularly efficient when applied to vectors that have tensor structure. Such a sketch can be used to speed up explicit kernel methods, bilinear pooling in neural networks and is a cornerstone in many numerical linear algebra algorithms. == Mathematical definition == Mathematically, a dimensionality reduction or sketching matrix is a matrix M ∈ R k × d {\displaystyle M\in \mathbb {R} ^{k\times d}} , where k < d {\displaystyle k Read more →

• 

  Vladimir Batagelj

  Vladimir Batagelj (born June 14, 1948 in Idrija, Yugoslavia) is a Slovenian mathematician and an emeritus professor of mathematics at the University of Ljubljana. He is known for his work in discrete mathematics and combinatorial optimization, particularly analysis of social networks and other large networks (blockmodeling). == Education and career == Vladimir Batagelj completed his Ph.D. at the University of Ljubljana in 1986 under the direction of Tomaž Pisanski. He stayed at the University of Ljubljana as a professor until his retirement, where he was a professor of sociology and statistics, while also being a chair of the Department of Sociology of the Faculty of Social Sciences. As visiting professor, he was taught at the University of Pittsburgh (1990-91) and at the University of Konstanz (2002). He was also a member of editorial boards of two journals: Informatica and Journal of Social Structure. His work has been cited over 11000 times. His book Exploratory Social Network Analysis with Pajek on blockmodeling, coauthored with Wouter de Nooy and Andrej Mrvar, is Batagelj's most cited work and has over 3300 citations. The book was translated into Chinese and Japanese. The revised and expanded third edition has been published by Cambridge University Press. In 1975, 11 years before completing his PhD, Batagelj published a solo paper in Communications of the ACM. Batagelj authored more than 20 textbooks in Slovenian, covering topics like TeX, combinatorics and discrete mathematics. He has also written extensively in the Slovenian popular science journal Presek. Batagelj has advised 9 Ph.D. students. == Pajek == Batagelj is particularly known for his work on Pajek, a freely available software for analysis and visualization of large networks. He began work on Pajek in 1996 with Andrej Mrvar, who was then his PhD student. == Awards and honors == First prizes for contributions (with Andrej Mrvar) to Graph Drawing Contests in years: 1995, 1996, 1997, 1998, 1999, 2000 and 2005 / Graph Drawing Hall of Fame. In 2007 the book Generalized blockmodeling was awarded the Harrison White Outstanding Book Award by the Mathematical Sociology Section of American Sociological Association In 2007 he was awarded (together with Anuška Ferligoj) the Simmel Award by INSNA. In 2013, Vladimir Batagelj and Andrej Mrvar received the INSNA's William D. Richards Software award for their work on Pajek. == Selected bibliography == Vladimir Batagelj, Social Network Analysis, Large-Scale [1]. in R.A. Meyers, ed., Encyclopedia of Complexity and Systems Science, Springer 2009: 8245–8265. Vladimir Batagelj, Complex Networks, Visualization of [2]. in R.A. Meyers, ed., Encyclopedia of Complexity and Systems Science, Springer 2009: 1253–1268. Wouter de Nooy, Andrej Mrvar, Vladimir Batagelj, Mark Granovetter (Series Editor), Exploratory Social Network Analysis with Pajek (Structural Analysis in the Social Sciences), Cambridge University Press 2005 (ISBN 0-521-60262-9). ESNA in Japanese, TDU, 2010. Patrick Doreian, Vladimir Batagelj, Anuška Ferligoj, Mark Granovetter (Series Editor), Generalized Blockmodeling (Structural Analysis in the Social Sciences), Cambridge University Press 2004 (ISBN 0-521-84085-6)

  Read more →
• 

  Vapnik–Chervonenkis theory

  Vapnik–Chervonenkis theory (also known as VC theory) was developed during 1960–1990 by Vladimir Vapnik and Alexey Chervonenkis. The theory is a form of computational learning theory, which attempts to explain the learning process from a statistical point of view. == Introduction == VC theory covers at least four parts (as explained in The Nature of Statistical Learning Theory): Theory of consistency of learning processes What are (necessary and sufficient) conditions for consistency of a learning process based on the empirical risk minimization principle? Nonasymptotic theory of the rate of convergence of learning processes How fast is the rate of convergence of the learning process? Theory of controlling the generalization ability of learning processes How can one control the rate of convergence (the generalization ability) of the learning process? Theory of constructing learning machines How can one construct algorithms that can control the generalization ability? VC Theory is a major subbranch of statistical learning theory. One of its main applications in statistical learning theory is to provide generalization conditions for learning algorithms. From this point of view, VC theory is related to stability, which is an alternative approach for characterizing generalization. In addition, VC theory and VC dimension are instrumental in the theory of empirical processes, in the case of processes indexed by VC classes. Arguably these are the most important applications of the VC theory, and are employed in proving generalization. Several techniques will be introduced that are widely used in the empirical process and VC theory. The discussion is mainly based on the book Weak Convergence and Empirical Processes: With Applications to Statistics. == Overview of VC theory in empirical processes == === Background on empirical processes === Let ( X , A ) {\displaystyle ({\mathcal {X}},{\mathcal {A}})} be a measurable space. For any measure Q {\displaystyle Q} on ( X , A ) {\displaystyle ({\mathcal {X}},{\mathcal {A}})} , and any measurable functions f : X → R {\displaystyle f:{\mathcal {X}}\to \mathbf {R} } , define Q f = ∫ f d Q {\displaystyle Qf=\int fdQ} Measurability issues will be ignored here, for more technical detail see. Let F {\displaystyle {\mathcal {F}}} be a class of measurable functions f : X → R {\displaystyle f:{\mathcal {X}}\to \mathbf {R} } and define: ‖ Q ‖ F = sup { | Q f | : f ∈ F } . {\displaystyle \|Q\|_{\mathcal {F}}=\sup\{\vert Qf\vert \ :\ f\in {\mathcal {F}}\}.} Let X 1 , … , X n {\displaystyle X_{1},\ldots ,X_{n}} be independent, identically distributed random elements of ( X , A ) {\displaystyle ({\mathcal {X}},{\mathcal {A}})} . Then define the empirical measure P n = n − 1 ∑ i = 1 n δ X i , {\displaystyle \mathbb {P} _{n}=n^{-1}\sum _{i=1}^{n}\delta _{X_{i}},} where δ here stands for the Dirac measure. The empirical measure induces a map F → R {\displaystyle {\mathcal {F}}\to \mathbf {R} } given by: f ↦ P n f = 1 n ( f ( X 1 ) + . . . + f ( X n ) ) {\displaystyle f\mapsto \mathbb {P} _{n}f={\frac {1}{n}}(f(X_{1})+...+f(X_{n}))} Now suppose P is the underlying true distribution of the data, which is unknown. Empirical Processes theory aims at identifying classes F {\displaystyle {\mathcal {F}}} for which statements such as the following hold: uniform law of large numbers: ‖ P n − P ‖ F → n 0 , {\displaystyle \|\mathbb {P} _{n}-P\|_{\mathcal {F}}{\underset {n}{\to }}0,} That is, as n → ∞ {\displaystyle n\to \infty } , | 1 n ( f ( X 1 ) + . . . + f ( X n ) ) − ∫ f d P | → 0 {\displaystyle \left|{\frac {1}{n}}(f(X_{1})+...+f(X_{n}))-\int fdP\right|\to 0} uniformly for all f ∈ F {\displaystyle f\in {\mathcal {F}}} . uniform central limit theorem: G n = n ( P n − P ) ⇝ G , in ℓ ∞ ( F ) {\displaystyle \mathbb {G} _{n}={\sqrt {n}}(\mathbb {P} _{n}-P)\rightsquigarrow \mathbb {G} ,\quad {\text{in }}\ell ^{\infty }({\mathcal {F}})} In the former case F {\displaystyle {\mathcal {F}}} is called Glivenko–Cantelli class, and in the latter case (under the assumption ∀ x , sup f ∈ F | f ( x ) − P f | < ∞ {\displaystyle \forall x,\sup \nolimits _{f\in {\mathcal {F}}}\vert f(x)-Pf\vert <\infty } ) the class F {\displaystyle {\mathcal {F}}} is called Donsker or P-Donsker. A Donsker class is Glivenko–Cantelli in probability by an application of Slutsky's theorem. These statements are true for a single f {\displaystyle f} , by standard LLN, CLT arguments under regularity conditions, and the difficulty in the Empirical Processes comes in because joint statements are being made for all f ∈ F {\displaystyle f\in {\mathcal {F}}} . Intuitively then, the set F {\displaystyle {\mathcal {F}}} cannot be too large, and as it turns out that the geometry of F {\displaystyle {\mathcal {F}}} plays a very important role. One way of measuring how big the function set F {\displaystyle {\mathcal {F}}} is to use the so-called covering numbers. The covering number N ( ε , F , ‖ ⋅ ‖ ) {\displaystyle N(\varepsilon ,{\mathcal {F}},\|\cdot \|)} is the minimal number of balls { g : ‖ g − f ‖ < ε } {\displaystyle \{g:\|g-f\|<\varepsilon \}} needed to cover the set F {\displaystyle {\mathcal {F}}} (here it is obviously assumed that there is an underlying norm on F {\displaystyle {\mathcal {F}}} ). The entropy is the logarithm of the covering number. Two sufficient conditions are provided below, under which it can be proved that the set F {\displaystyle {\mathcal {F}}} is Glivenko–Cantelli or Donsker. A class F {\displaystyle {\mathcal {F}}} is P-Glivenko–Cantelli if it is P-measurable with envelope F such that P ∗ F < ∞ {\displaystyle P^{\ast }F<\infty } and satisfies: ∀ ε > 0 sup Q N ( ε ‖ F ‖ Q , F , L 1 ( Q ) ) < ∞ . {\displaystyle \forall \varepsilon >0\quad \sup \nolimits _{Q}N(\varepsilon \|F\|_{Q},{\mathcal {F}},L_{1}(Q))<\infty .} The next condition is a version of Dudley's theorem. If F {\displaystyle {\mathcal {F}}} is a class of functions such that ∫ 0 ∞ sup Q log ⁡ N ( ε ‖ F ‖ Q , 2 , F , L 2 ( Q ) ) d ε < ∞ {\displaystyle \int _{0}^{\infty }\sup \nolimits _{Q}{\sqrt {\log N\left(\varepsilon \|F\|_{Q,2},{\mathcal {F}},L_{2}(Q)\right)}}d\varepsilon <\infty } then F {\displaystyle {\mathcal {F}}} is P-Donsker for every probability measure P such that P ∗ F 2 < ∞ {\displaystyle P^{\ast }F^{2}<\infty } . In the last integral, the notation means ‖ f ‖ Q , 2 = ( ∫ | f | 2 d Q ) 1 2 {\displaystyle \|f\|_{Q,2}=\left(\int |f|^{2}dQ\right)^{\frac {1}{2}}} . === Symmetrization === The majority of the arguments about how to bound the empirical process rely on symmetrization, maximal and concentration inequalities, and chaining. Symmetrization is usually the first step of the proofs, and since it is used in many machine learning proofs on bounding empirical loss functions (including the proof of the VC inequality which is discussed in the next section). It is presented here: Consider the empirical process: f ↦ ( P n − P ) f = 1 n ∑ i = 1 n ( f ( X i ) − P f ) {\displaystyle f\mapsto (\mathbb {P} _{n}-P)f={\dfrac {1}{n}}\sum _{i=1}^{n}(f(X_{i})-Pf)} Turns out that there is a connection between the empirical and the following symmetrized process: f ↦ P n 0 f = 1 n ∑ i = 1 n ε i f ( X i ) {\displaystyle f\mapsto \mathbb {P} _{n}^{0}f={\dfrac {1}{n}}\sum _{i=1}^{n}\varepsilon _{i}f(X_{i})} The symmetrized process is a Rademacher process, conditionally on the data X i {\displaystyle X_{i}} . Therefore, it is a sub-Gaussian process by Hoeffding's inequality. Lemma (Symmetrization). For every nondecreasing, convex Φ: R → R and class of measurable functions F {\displaystyle {\mathcal {F}}} , E Φ ( ‖ P n − P ‖ F ) ≤ E Φ ( 2 ‖ P n 0 ‖ F ) {\displaystyle \mathbb {E} \Phi (\|\mathbb {P} _{n}-P\|_{\mathcal {F}})\leq \mathbb {E} \Phi \left(2\left\|\mathbb {P} _{n}^{0}\right\|_{\mathcal {F}}\right)} The proof of the Symmetrization lemma relies on introducing independent copies of the original variables X i {\displaystyle X_{i}} (sometimes referred to as a ghost sample) and replacing the inner expectation of the LHS by these copies. After an application of Jensen's inequality different signs could be introduced (hence the name symmetrization) without changing the expectation. The proof can be found below because of its instructive nature. The same proof method can be used to prove the Glivenko–Cantelli theorem. A typical way of proving empirical CLTs, first uses symmetrization to pass the empirical process to P n 0 {\displaystyle \mathbb {P} _{n}^{0}} and then argue conditionally on the data, using the fact that Rademacher processes are simple processes with nice properties. === VC Connection === It turns out that there is a fascinating connection between certain combinatorial properties of the set F {\displaystyle {\mathcal {F}}} and the entropy numbers. Uniform covering numbers can be controlled by the notion of Vapnik–Chervonenkis classes of sets – or shortly VC sets. Consider a collection C {\displaystyle {\mathcal {C}}} of subsets of the sample space X {\displaystyle

  Read more →
• 

  GNU toolchain

  The GNU toolchain is a broad collection of programming tools produced by the GNU Project. These tools form a toolchain (a suite of tools used in a serial manner) used for developing software applications and operating systems. The GNU toolchain plays a vital role in development of Linux, some BSD systems, and software for embedded systems. Parts of the GNU toolchain are also directly used with or ported to other platforms such as Solaris, macOS, Microsoft Windows (via Cygwin and MinGW/MSYS/WSL2), Sony PlayStation Portable (used by PSP modding scene) and Sony PlayStation 3. == Components == Projects in the GNU toolchain are: GNU Autotools (build system) – Software build toolset from GNU GNU Binutils – GNU software development tools for executable code GNU Bison – Yacc-compatible parser generator program GNU C Library – GNU implementation of the standard C libraryPages displaying short descriptions of redirect targets GNU Compiler Collection – Free and open-source compiler for various programming languages GNU Debugger – Source-level debugger GNU m4 – General-purpose macro processor GNU make – Software build automation tool

  Read more →
• 

  Softmax function

  The softmax function, also known as softargmax or normalized exponential function, converts a tuple of K real numbers into a probability distribution over K possible outcomes. It is a generalization of the logistic function to multiple dimensions, and is used in multinomial logistic regression. The softmax function is often used as the last activation function of a neural network to normalize the output of a network to a probability distribution over predicted output classes. == Definition == The softmax function takes as input a tuple z of K real numbers, and normalizes it into a probability distribution consisting of K probabilities proportional to the exponentials of the input numbers. That is, prior to applying softmax, some tuple components could be negative, or greater than one; and might not sum to 1; but after applying softmax, each component will be in the interval ( 0 , 1 ) {\displaystyle (0,1)} , and the components will add up to 1, so that they can be interpreted as probabilities. Furthermore, the larger input components will correspond to larger probabilities. Formally, the standard (unit) softmax function σ : R K → ( 0 , 1 ) K {\displaystyle \sigma :\mathbb {R} ^{K}\to (0,1)^{K}} , where ⁠ K > 1 {\displaystyle K>1} ⁠, takes a tuple z = ( z 1 , … , z K ) ∈ R K {\displaystyle \mathbf {z} =(z_{1},\dotsc ,z_{K})\in \mathbb {R} ^{K}} and computes each component of vector σ ( z ) ∈ ( 0 , 1 ) K {\displaystyle \sigma (\mathbf {z} )\in (0,1)^{K}} with σ ( z ) i = e z i ∑ j = 1 K e z j . {\displaystyle \sigma (\mathbf {z} )_{i}={\frac {e^{z_{i}}}{\sum _{j=1}^{K}e^{z_{j}}}}\,.} In words, the softmax applies the standard exponential function to each element z i {\displaystyle z_{i}} of the input tuple z {\displaystyle \mathbf {z} } (consisting of K {\displaystyle K} real numbers), and normalizes these values by dividing by the sum of all these exponentials. The normalization ensures that the sum of the components of the output vector σ ( z ) {\displaystyle \sigma (\mathbf {z} )} is 1. The term "softmax" derives from the amplifying effects of the exponential on any maxima in the input tuple. For example, the standard softmax of ( 1 , 2 , 8 ) {\displaystyle (1,2,8)} is approximately ( 0.001 , 0.002 , 0.997 ) {\displaystyle (0.001,0.002,0.997)} , which amounts to assigning almost all of the total unit weight in the result to the position of the tuple's maximal element (of 8). In general, instead of e a different base b > 0 can be used. As above, if b > 1 then larger input components will result in larger output probabilities, and increasing the value of b will create probability distributions that are more concentrated around the positions of the largest input values. Conversely, if 0 < b < 1 then smaller input components will result in larger output probabilities, and decreasing the value of b will create probability distributions that are more concentrated around the positions of the smallest input values. Writing b = e β {\displaystyle b=e^{\beta }} or b = e − β {\displaystyle b=e^{-\beta }} (for real β) yields the expressions: σ ( z ) i = e β z i ∑ j = 1 K e β z j or σ ( z ) i = e − β z i ∑ j = 1 K e − β z j for i = 1 , … , K . {\displaystyle \sigma (\mathbf {z} )_{i}={\frac {e^{\beta z_{i}}}{\sum _{j=1}^{K}e^{\beta z_{j}}}}{\text{ or }}\sigma (\mathbf {z} )_{i}={\frac {e^{-\beta z_{i}}}{\sum _{j=1}^{K}e^{-\beta z_{j}}}}{\text{ for }}i=1,\dotsc ,K.} A value proportional to the reciprocal of β is sometimes referred to as the temperature: β = 1 / k T {\textstyle \beta =1/kT} , where k is typically 1 or the Boltzmann constant and T is the temperature. A higher temperature results in a more uniform output distribution (i.e. with higher entropy; it is "more random"), while a lower temperature results in a sharper output distribution, with one value dominating. In some fields, the base is fixed, corresponding to a fixed scale, while in others the parameter β (or T) is varied. The softmax function is a multiple-variable generalization of the logistic function. == Interpretations == === Smooth arg max === The Softmax function is a smooth approximation to the arg max function: the function whose value is the index of a tuple's largest element. The name "softmax" may be misleading. Softmax is not a smooth maximum (that is, a smooth approximation to the maximum function). The term "softmax" is also used for the closely related LogSumExp function, which is a smooth maximum. For this reason, some prefer the more accurate term "softargmax", though the term "softmax" is conventional in machine learning. This section uses the term "softargmax" for clarity. Formally, instead of considering the arg max as a function with categorical output 1 , … , n {\displaystyle 1,\dots ,n} (corresponding to the index), consider the arg max function with one-hot representation of the output (assuming there is a unique maximum arg): a r g m a x ⁡ ( z 1 , … , z n ) = ( y 1 , … , y n ) = ( 0 , … , 0 , 1 , 0 , … , 0 ) , {\displaystyle \operatorname {arg\,max} (z_{1},\,\dots ,\,z_{n})=(y_{1},\,\dots ,\,y_{n})=(0,\,\dots ,\,0,\,1,\,0,\,\dots ,\,0),} where the output coordinate y i = 1 {\displaystyle y_{i}=1} if and only if i {\displaystyle i} is the arg max of ( z 1 , … , z n ) {\displaystyle (z_{1},\dots ,z_{n})} , meaning z i {\displaystyle z_{i}} is the unique maximum value of ( z 1 , … , z n ) {\displaystyle (z_{1},\,\dots ,\,z_{n})} . For example, in this encoding a r g m a x ⁡ ( 1 , 5 , 10 ) = ( 0 , 0 , 1 ) , {\displaystyle \operatorname {arg\,max} (1,5,10)=(0,0,1),} since the third argument is the maximum. This can be generalized to multiple arg max values (multiple equal z i {\displaystyle z_{i}} being the maximum) by dividing the 1 between all max args; formally 1/k where k is the number of arguments assuming the maximum. For example, a r g m a x ⁡ ( 1 , 5 , 5 ) = ( 0 , 1 / 2 , 1 / 2 ) , {\displaystyle \operatorname {arg\,max} (1,\,5,\,5)=(0,\,1/2,\,1/2),} since the second and third argument are both the maximum. In case all arguments are equal, this is simply a r g m a x ⁡ ( z , … , z ) = ( 1 / n , … , 1 / n ) . {\displaystyle \operatorname {arg\,max} (z,\dots ,z)=(1/n,\dots ,1/n).} Points z with multiple arg max values are singular points (or singularities, and form the singular set) – these are the points where arg max is discontinuous (with a jump discontinuity) – while points with a single arg max are known as non-singular or regular points. With the last expression given in the introduction, softargmax is now a smooth approximation of arg max: as ⁠ β → ∞ {\displaystyle \beta \to \infty } ⁠, softargmax converges to arg max. There are various notions of convergence of a function; softargmax converges to arg max pointwise, meaning for each fixed input z as ⁠ β → ∞ {\displaystyle \beta \to \infty } ⁠, σ β ( z ) → a r g m a x ⁡ ( z ) . {\displaystyle \sigma _{\beta }(\mathbf {z} )\to \operatorname {arg\,max} (\mathbf {z} ).} However, softargmax does not converge uniformly to arg max, meaning intuitively that different points converge at different rates, and may converge arbitrarily slowly. In fact, softargmax is continuous, but arg max is not continuous at the singular set where two coordinates are equal, while the uniform limit of continuous functions is continuous. The reason it fails to converge uniformly is that for inputs where two coordinates are almost equal (and one is the maximum), the arg max is the index of one or the other, so a small change in input yields a large change in output. For example, σ β ( 1 , 1.0001 ) → ( 0 , 1 ) , {\displaystyle \sigma _{\beta }(1,\,1.0001)\to (0,1),} but σ β ( 1 , 0.9999 ) → ( 1 , 0 ) , {\displaystyle \sigma _{\beta }(1,\,0.9999)\to (1,\,0),} and σ β ( 1 , 1 ) = 1 / 2 {\displaystyle \sigma _{\beta }(1,\,1)=1/2} for all inputs: the closer the points are to the singular set ( x , x ) {\displaystyle (x,x)} , the slower they converge. However, softargmax does converge compactly on the non-singular set. Conversely, as ⁠ β → − ∞ {\displaystyle \beta \to -\infty } ⁠, softargmax converges to arg min in the same way, where here the singular set is points with two arg min values. In the language of tropical analysis, the softmax is a deformation or "quantization" of arg max and arg min, corresponding to using the log semiring instead of the max-plus semiring (respectively min-plus semiring), and recovering the arg max or arg min by taking the limit is called "tropicalization" or "dequantization". It is also the case that, for any fixed β, if one input ⁠ z i {\displaystyle z_{i}} ⁠ is much larger than the others relative to the temperature, T = 1 / β {\displaystyle T=1/\beta } , the output is approximately the arg max. For example, a difference of 10 is large relative to a temperature of 1: σ ( 0 , 10 ) := σ 1 ( 0 , 10 ) = ( 1 / ( 1 + e 10 ) , e 10 / ( 1 + e 10 ) ) ≈ ( 0.00005 , 0.99995 ) {\displaystyle \sigma (0,\,10):=\sigma _{1}(0,\,10)=\left(1/\left(1+e^{10}\right),\,e^{10}/\left(1+e^{10}\right)\right)\approx (0.00005

  Read more →
• 

  (1+ε)-approximate nearest neighbor search

  (1+ε)-approximate nearest neighbor search is a variant of the nearest neighbor search problem. A solution to the (1+ε)-approximate nearest neighbor search is a point or multiple points within distance (1+ε) R from a query point, where R is the distance between the query point and its true nearest neighbor. Reasons to approximate nearest neighbor search include the space and time costs of exact solutions in high-dimensional spaces (see curse of dimensionality) and that in some domains, finding an approximate nearest neighbor is an acceptable solution. Approaches for solving (1+ε)-approximate nearest neighbor search include k-d trees, locality-sensitive hashing and brute-force search.

  Read more →
• 

  Mean squared error

  In statistics, the mean squared error (MSE) or mean squared deviation (MSD) of an estimator (of a procedure for estimating an unobserved quantity) measures the average of the squares of the errors—that is, the average squared difference between the estimated values and the true value. MSE is a risk function, corresponding to the expected value of the squared error loss. The fact that MSE is almost always strictly positive (and not zero) is because of randomness or because the estimator does not account for information that could produce a more accurate estimate. In machine learning, specifically empirical risk minimization, MSE may refer to the empirical risk (the average loss on an observed data set), as an estimate of the true MSE (the true risk: the average loss on the actual population distribution). The MSE is a measure of the quality of an estimator. As it is derived from the square of Euclidean distance, it is always a positive value that decreases as the error approaches zero. The MSE is the second moment (about the origin) of the error, and thus incorporates both the variance of the estimator (how widely spread the estimates are from one data sample to another) and its bias (how far off the average estimated value is from the true value). For an unbiased estimator, the MSE is the variance of the estimator. Like the variance, MSE has the same units of measurement as the square of the quantity being estimated. In an analogy to standard deviation, taking the square root of MSE yields the root-mean-square error or root-mean-square deviation (RMSE or RMSD), which has the same units as the quantity being estimated; for an unbiased estimator, the RMSE is the square root of the variance, known as the standard error. == Definition and basic properties == The MSE either assesses the quality of a predictor (i.e., a function mapping arbitrary inputs to a sample of values of some random variable), or of an estimator (i.e., a mathematical function mapping a sample of data to an estimate of a parameter of the population from which the data is sampled). In the context of prediction, understanding the prediction interval can also be useful as it provides a range within which a future observation will fall, with a certain probability. The definition of an MSE differs according to whether one is describing a predictor or an estimator. === Predictor === If a vector of n {\displaystyle n} predictions is generated from a sample of n {\displaystyle n} data points on all variables, and Y {\displaystyle Y} is the vector of observed values of the variable being predicted, with Y ^ {\displaystyle {\hat {Y}}} being the predicted values (e.g. as from a least-squares fit), then the within-sample MSE of the predictor is computed as MSE = 1 n ∑ i = 1 n ( Y i − Y i ^ ) 2 {\displaystyle \operatorname {MSE} ={\frac {1}{n}}\sum _{i=1}^{n}\left(Y_{i}-{\hat {Y_{i}}}\right)^{2}} In other words, the MSE is the mean ( 1 n ∑ i = 1 n ) {\textstyle \left({\frac {1}{n}}\sum _{i=1}^{n}\right)} of the squares of the errors ( Y i − Y i ^ ) 2 {\textstyle \left(Y_{i}-{\hat {Y_{i}}}\right)^{2}} . This is an easily computable quantity for a particular sample (and hence is sample-dependent). In matrix notation, MSE = 1 n ∑ i = 1 n ( e i ) 2 = 1 n e T e {\displaystyle \operatorname {MSE} ={\frac {1}{n}}\sum _{i=1}^{n}(e_{i})^{2}={\frac {1}{n}}\mathbf {e} ^{\mathsf {T}}\mathbf {e} } where e i {\displaystyle e_{i}} is Y i − Y i ^ {\displaystyle Y_{i}-{\hat {Y_{i}}}} and e {\displaystyle \mathbf {e} } is a n × 1 {\displaystyle n\times 1} column vector. The MSE can also be computed on q data points that were not used in estimating the model, either because they were held back for this purpose, or because these data have been newly obtained. Within this process, known as cross-validation, the MSE is often called the test MSE, and is computed as MSE = 1 q ∑ i = n + 1 n + q ( Y i − Y i ^ ) 2 {\displaystyle \operatorname {MSE} ={\frac {1}{q}}\sum _{i=n+1}^{n+q}\left(Y_{i}-{\hat {Y_{i}}}\right)^{2}} === Estimator === The MSE of an estimator θ ^ {\displaystyle {\hat {\theta }}} with respect to an unknown parameter θ {\displaystyle \theta } is defined as MSE ⁡ ( θ ^ ) = E θ ⁡ [ ( θ ^ − θ ) 2 ] . {\displaystyle \operatorname {MSE} ({\hat {\theta }})=\operatorname {E} _{\theta }\left[({\hat {\theta }}-\theta )^{2}\right].} This definition depends on the unknown parameter, therefore the MSE is a priori property of an estimator. The MSE could be a function of unknown parameters, in which case any estimator of the MSE based on estimates of these parameters would be a function of the data (and thus a random variable). If the estimator θ ^ {\displaystyle {\hat {\theta }}} is derived as a sample statistic and is used to estimate some population parameter, then the expectation is with respect to the sampling distribution of the sample statistic. The MSE can be written as the sum of the variance of the estimator and the squared bias of the estimator, providing a useful way to calculate the MSE and implying that in the case of unbiased estimators, the MSE and variance are equivalent. MSE ⁡ ( θ ^ ) = Var θ ⁡ ( θ ^ ) + Bias ⁡ ( θ ^ , θ ) 2 . {\displaystyle \operatorname {MSE} ({\hat {\theta }})=\operatorname {Var} _{\theta }({\hat {\theta }})+\operatorname {Bias} ({\hat {\theta }},\theta )^{2}.} ==== Proof of variance and bias relationship ==== MSE ⁡ ( θ ^ ) = E θ ⁡ [ ( θ ^ − θ ) 2 ] = E θ ⁡ [ ( θ ^ − E θ ⁡ [ θ ^ ] + E θ ⁡ [ θ ^ ] − θ ) 2 ] = E θ ⁡ [ ( θ ^ − E θ ⁡ [ θ ^ ] ) 2 + 2 ( θ ^ − E θ ⁡ [ θ ^ ] ) ( E θ ⁡ [ θ ^ ] − θ ) + ( E θ ⁡ [ θ ^ ] − θ ) 2 ] = E θ ⁡ [ ( θ ^ − E θ ⁡ [ θ ^ ] ) 2 ] + E θ ⁡ [ 2 ( θ ^ − E θ ⁡ [ θ ^ ] ) ( E θ ⁡ [ θ ^ ] − θ ) ] + E θ ⁡ [ ( E θ ⁡ [ θ ^ ] − θ ) 2 ] = E θ ⁡ [ ( θ ^ − E θ ⁡ [ θ ^ ] ) 2 ] + 2 ( E θ ⁡ [ θ ^ ] − θ ) E θ ⁡ [ θ ^ − E θ ⁡ [ θ ^ ] ] + ( E θ ⁡ [ θ ^ ] − θ ) 2 E θ ⁡ [ θ ^ ] − θ = constant = E θ ⁡ [ ( θ ^ − E θ ⁡ [ θ ^ ] ) 2 ] + 2 ( E θ ⁡ [ θ ^ ] − θ ) ( E θ ⁡ [ θ ^ ] − E θ ⁡ [ θ ^ ] ) + ( E θ ⁡ [ θ ^ ] − θ ) 2 E θ ⁡ [ θ ^ ] = constant = E θ ⁡ [ ( θ ^ − E θ ⁡ [ θ ^ ] ) 2 ] + ( E θ ⁡ [ θ ^ ] − θ ) 2 = Var θ ⁡ ( θ ^ ) + Bias θ ⁡ ( θ ^ , θ ) 2 {\displaystyle {\begin{aligned}\operatorname {MSE} ({\hat {\theta }})&=\operatorname {E} _{\theta }\left[({\hat {\theta }}-\theta )^{2}\right]\\&=\operatorname {E} _{\theta }\left[\left({\hat {\theta }}-\operatorname {E} _{\theta }[{\hat {\theta }}]+\operatorname {E} _{\theta }[{\hat {\theta }}]-\theta \right)^{2}\right]\\&=\operatorname {E} _{\theta }\left[\left({\hat {\theta }}-\operatorname {E} _{\theta }[{\hat {\theta }}]\right)^{2}+2\left({\hat {\theta }}-\operatorname {E} _{\theta }[{\hat {\theta }}]\right)\left(\operatorname {E} _{\theta }[{\hat {\theta }}]-\theta \right)+\left(\operatorname {E} _{\theta }[{\hat {\theta }}]-\theta \right)^{2}\right]\\&=\operatorname {E} _{\theta }\left[\left({\hat {\theta }}-\operatorname {E} _{\theta }[{\hat {\theta }}]\right)^{2}\right]+\operatorname {E} _{\theta }\left[2\left({\hat {\theta }}-\operatorname {E} _{\theta }[{\hat {\theta }}]\right)\left(\operatorname {E} _{\theta }[{\hat {\theta }}]-\theta \right)\right]+\operatorname {E} _{\theta }\left[\left(\operatorname {E} _{\theta }[{\hat {\theta }}]-\theta \right)^{2}\right]\\&=\operatorname {E} _{\theta }\left[\left({\hat {\theta }}-\operatorname {E} _{\theta }[{\hat {\theta }}]\right)^{2}\right]+2\left(\operatorname {E} _{\theta }[{\hat {\theta }}]-\theta \right)\operatorname {E} _{\theta }\left[{\hat {\theta }}-\operatorname {E} _{\theta }[{\hat {\theta }}]\right]+\left(\operatorname {E} _{\theta }[{\hat {\theta }}]-\theta \right)^{2}&&\operatorname {E} _{\theta }[{\hat {\theta }}]-\theta ={\text{constant}}\\&=\operatorname {E} _{\theta }\left[\left({\hat {\theta }}-\operatorname {E} _{\theta }[{\hat {\theta }}]\right)^{2}\right]+2\left(\operatorname {E} _{\theta }[{\hat {\theta }}]-\theta \right)\left(\operatorname {E} _{\theta }[{\hat {\theta }}]-\operatorname {E} _{\theta }[{\hat {\theta }}]\right)+\left(\operatorname {E} _{\theta }[{\hat {\theta }}]-\theta \right)^{2}&&\operatorname {E} _{\theta }[{\hat {\theta }}]={\text{constant}}\\&=\operatorname {E} _{\theta }\left[\left({\hat {\theta }}-\operatorname {E} _{\theta }[{\hat {\theta }}]\right)^{2}\right]+\left(\operatorname {E} _{\theta }[{\hat {\theta }}]-\theta \right)^{2}\\&=\operatorname {Var} _{\theta }({\hat {\theta }})+\operatorname {Bias} _{\theta }({\hat {\theta }},\theta )^{2}\end{aligned}}} An even shorter proof can be achieved using the well-known formula that for a random variable X {\textstyle X} , E ( X 2 ) = Var ⁡ ( X ) + ( E ( X ) ) 2 {\textstyle \mathbb {E} (X^{2})=\operatorname {Var} (X)+(\mathbb {E} (X))^{2}} . By substituting X {\textstyle X} with, θ ^ − θ {\textstyle {\hat {\theta }}-\theta } , we have MSE ⁡ ( θ ^ ) = E [ ( θ ^ − θ ) 2 ] = Var ⁡ ( θ ^ − θ ) + ( E [ θ ^ − θ ] ) 2 = Var ⁡ ( θ ^ ) + Bias 2 ⁡ ( θ ^ , θ ) {\displaystyle {\begin{aligned}\operatorname {MSE} ({\hat {\theta }})&=\mathbb {E} [({\hat {\theta }}-\theta )^{2}]\\&=\operator

  Read more →
• 

  Cognitive philology

  Cognitive philology is the science that studies written and oral texts as the product of human mental processes. Studies in cognitive philology compare documentary evidence emerging from textual investigations with results of experimental research, especially in the fields of cognitive and ecological psychology, neurosciences and artificial intelligence. "The point is not the text, but the mind that made it". Cognitive Philology aims to foster communication between literary, textual, philological disciplines on the one hand and researches across the whole range of the cognitive, evolutionary, ecological and human sciences on the other. Cognitive philology: investigates transmission of oral and written text, and categorization processes which lead to classification of knowledge, mostly relying on the information theory; studies how narratives emerge in so called natural conversation and selective process which lead to the rise of literary standards for storytelling, mostly relying on embodied semantics; explores the evolutive and evolutionary role played by rhythm and metre in human ontogenetic and phylogenetic development and the pertinence of the semantic association during processing of cognitive maps; Provides the scientific ground for multimedia critical editions of literary texts. Among the founding thinkers and noteworthy scholars devoted to such investigations are: Alan Richardson: Studies Theory of Mind in early-modern and contemporary literature. Anatole Pierre Fuksas Benoît de Cornulier David Herman: Professor of English at North Carolina State University and an adjunct professor of linguistics at Duke University. He is the author of "Universal Grammar and Narrative Form" and the editor of "Narratologies: New Perspectives on Narrative Analysis". Domenico Fiormonte François Recanati Gilles Fauconnier, a professor in Cognitive science at the University of California, San Diego. He was one of the founders of cognitive linguistics in the 1970s through his work on pragmatic scales and mental spaces. His research explores the areas of conceptual integration and compressions of conceptual mappings in terms of the emergent structure in language. Julián Santano Moreno Luca Nobile Manfred Jahn in Germany Mark Turner Paolo Canettieri

  Read more →
• 

  Chromosome (evolutionary algorithm)

  A chromosome or genotype in evolutionary algorithms (EA) is a set of parameters which define a proposed solution of the problem that the evolutionary algorithm is trying to solve. The set of all solutions, also called individuals according to the biological model, is known as the population. The genome of an individual consists of one, more rarely of several, chromosomes and corresponds to the genetic representation of the task to be solved. A chromosome is composed of a set of genes, where a gene consists of one or more semantically connected parameters, which are often also called decision variables. They determine one or more phenotypic characteristics of the individual or at least have an influence on them. In the basic form of genetic algorithms, the chromosome is represented as a binary string, while in later variants and in EAs in general, a wide variety of other data structures are used. == Chromosome design == When creating the genetic representation of a task, it is determined which decision variables and other degrees of freedom of the task should be improved by the EA and possible additional heuristics and how the genotype-phenotype mapping should look like. The design of a chromosome translates these considerations into concrete data structures for which an EA then has to be selected, configured, extended, or, in the worst case, created. Finding a suitable representation of the problem domain for a chromosome is an important consideration, as a good representation will make the search easier by limiting the search space; similarly, a poorer representation will allow a larger search space. In this context, suitable mutation and crossover operators must also be found or newly defined to fit the chosen chromosome design. An important requirement for these operators is that they not only allow all points in the search space to be reached in principle, but also make this as easy as possible. The following requirements must be met by a well-suited chromosome: It must allow the accessibility of all admissible points in the search space. Design of the chromosome in such a way that it covers only the search space and no additional areas. so that there is no redundancy or only as little redundancy as possible. Observance of strong causality: small changes in the chromosome should only lead to small changes in the phenotype. This is also called locality of the relationship between search and problem space. Designing the chromosome in such a way that it excludes prohibited regions in the search space completely or as much as possible. While the first requirement is indispensable, depending on the application and the EA used, one usually only has to be satisfied with fulfilling the remaining requirements as far as possible. The evolutionary search is supported and possibly considerably accelerated by a fulfillment as complete as possible. == Examples of chromosomes == === Chromosomes for binary codings === In their classical form, GAs use bit strings and map the decision variables to be optimized onto them. An example for one Boolean and three integer decision variables with the value ranges 0 ≤ D 1 ≤ 60 {\displaystyle 0\leq D_{1}\leq 60} , 28 ≤ D 2 ≤ 30 {\displaystyle 28\leq D_{2}\leq 30} and − 12 ≤ D 3 ≤ 14 {\displaystyle -12\leq D_{3}\leq 14} may illustrate this: Note that the negative number here is given in two's complement. This straight forward representation uses five bits to represent the three values of D 2 {\displaystyle D_{2}} , although two bits would suffice. This is a significant redundancy. An improved alternative, where 28 is to be added for the genotype-phenotype mapping, could look like this: with D 2 = 28 + D 2 ′ = 29 {\displaystyle D_{2}=28+D'_{2}=29} . === Chromosomes with real-valued or integer genes === For the processing of tasks with real-valued or mixed-integer decision variables, EAs such as the evolution strategy or the real-coded GAs are suited. In the case of mixed-integer values, rounding is often used, but this represents some violation of the redundancy requirement. If the necessary precisions of the real values can be reasonably narrowed down, this violation can be remedied by using integer-coded GAs. For this purpose, the valid digits of real values are mapped to integers by multiplication with a suitable factor. For example, 12.380 becomes the integer 12380 by multiplying by 1000. This must of course be taken into account in genotype-phenotype mapping for evaluation and result presentation. A common form is a chromosome consisting of a list or an array of integer or real values. === Chromosomes for permutations === Combinatorial problems are mainly concerned with finding an optimal sequence of a set of elementary items. As an example, consider the problem of the traveling salesman who wants to visit a given number of cities exactly once on the shortest possible tour. The simplest and most obvious mapping onto a chromosome is to number the cities consecutively, to interpret a resulting sequence as permutation and to store it directly in a chromosome, where one gene corresponds to the ordinal number of a city. Then, however, the variation operators may only change the gene order and not remove or duplicate any genes. The chromosome thus contains the path of a possible tour to the cities. As an example the sequence 3 , 5 , 7 , 1 , 4 , 2 , 9 , 6 , 8 {\displaystyle 3,5,7,1,4,2,9,6,8} of nine cities may serve, to which the following chromosome corresponds: In addition to this encoding frequently called path representation, there are several other ways of representing a permutation, for example the ordinal representation or the matrix representation. === Chromosomes for co-evolution === When a genetic representation contains, in addition to the decision variables, additional information that influences evolution and/or the mapping of the genotype to the phenotype and is itself subject to evolution, this is referred to as co-evolution. A typical example is the evolution strategy (ES), which includes one or more mutation step sizes as strategy parameters in each chromosome. Another example is an additional gene to control a selection heuristic for resource allocation in a scheduling tasks. This approach is based on the assumption that good solutions are based on an appropriate selection of strategy parameters or on control gene(s) that influences genotype-phenotype mapping. The success of the ES gives evidence to this assumption. === Chromosomes for complex representations === The chromosomes presented above are well suited for processing tasks of continuous, mixed-integer, pure-integer or combinatorial optimization. For a combination of these optimization areas, on the other hand, it becomes increasingly difficult to map them to simple strings of values, depending on the task. The following extension of the gene concept is proposed by the EA GLEAM (General Learning Evolutionary Algorithm and Method) for this purpose: A gene is considered to be the description of an element or elementary trait of the phenotype, which may have multiple parameters. For this purpose, gene types are defined that contain as many parameters of the appropriate data type as are required to describe the particular element of the phenotype. A chromosome now consists of genes as data objects of the gene types, whereby, depending on the application, each gene type occurs exactly once as a gene or can be contained in the chromosome any number of times. The latter leads to chromosomes of dynamic length, as they are required for some problems. The gene type definitions also contain information on the permissible value ranges of the gene parameters, which are observed during chromosome generation and by corresponding mutations, so they cannot lead to lethal mutations. For tasks with a combinatorial part, there are suitable genetic operators that can move or reposition genes as a whole, i.e. with their parameters. A scheduling task is used as an illustration, in which workflows are to be scheduled that require different numbers of heterogeneous resources. A workflow specifies which work steps can be processed in parallel and which have to be executed one after the other. In this context, heterogeneous resources mean different processing times at different costs in addition to different processing capabilities. Each scheduling operation therefore requires one or more parameters that determine the resource selection, where the value ranges of the parameters depend on the number of alternative resources available for each work step. A suitable chromosome provides one gene type per work step and in this case one corresponding gene, which has one parameter for each required resource. The order of genes determines the order of scheduling operations and, therefore, the precedence in case of allocation conflicts. The exemplary gene type definition of work step 15 with two resources, for which there are four and seven alternatives respectively

  Read more →
• 

  Evolutionary attractor

  An evolutionary attractor is a point in an evolutionary space where a selection process will always drive trait values towards that point from the region around it. Because of the importance of evolution through natural selection, often such an evolutionary space will be defined by genetic or phenotypic traits, or possibly both. In this case the selection process will be a form of natural selection. The existence of an evolutionary attractor in a biological evolutionary space does not always imply that it can be reached from all points in that evolutionary space, nor does it identify what will happen when the evolutionary attractor is reached. While an evolutionary attractor may represent a point in evolutionary space that is resistant to further selection, such as an evolutionarily stable strategy, other possibilities are available. Because identification of an evolutionary attractor on its own does not describe everything about the evolutionary space in which it lies, this has led to interest in the evolutionary dynamics surrounding evolutionary attractors and in evolutionary spaces in general. (Theoretical biologists and mathematicians working in the area may prefer the terms adaptive dynamics or evolutionary invasion analysis to evolutionary dynamics.) These fields use differential equations which allows a more complete understanding of the dynamics in evolutionary spaces including the existence or otherwise of evolutionary attractors. Advances in the study of molecular evolution have also led to the identification of evolutionary attractors at a molecular level. Because biological evolutionary processes have been studied using evolutionary game theory, a technique inspired by game theory originally derived to address economic problems, not only can evolutionary attractors be found in biology but economists studying evolutionary economic models have also identified evolutionary attractors. Evolution in biology has also inspired evolutionary computation in computer science. Many algorithms in this field use a form of selection inspired by natural selection to generate results through evolutionary algorithms. This is therefore another area in which evolutionary attractors have been identified. == Evolutionary attractors in biology == It is not probably not surprising that biology is the field where most examples of evolutionary attractors have been identified, given the importance of evolution through natural selection. === Evolutionary attractors in adaptive landscapes === An evolutionary attractor is a point in genetic and/or phenotypic trait space, that evolution will always drive trait values towards via a selection process. The concept of an evolutionary attractor arose in population genetics following the origin of the adaptive landscape originally proposed by Sewall Wright in 1932. The height of a point in an adaptive landscape is a measure of evolutionary fitness. If a point in an adaptive landscape is a peak, then selection will always drive traits towards it and it will be an evolutionary attractor. While population genetics deals with discrete genetic traits, quantitative genetics extended such concepts to deal with continuous genetic traits, where the concept of evolutionary attractor is also valid. === Evolutionary attractors in evolutionary game models === Evolutionary game theory introduced into evolutionary biology concepts originally used in economics, with the advantage that evolution could be studied in relation to strategic choices made in animal conflicts. This is of particular interest because of the concept of the evolutionarily stable strategy or ESS, a strategy that once established is resistant to invasion by other strategies. ESSs will not always be evolutionary attractors, but if they are they will persist over evolutionary time. === Dynamics around evolutionary attractors in biology === Evolutionary attractors in biology do not exist in isolation. By definition they must exist in an evolutionary trait space where selection drives all traits towards them from a region immediately around them. That is, they must be convergence stable. Eshel (1983) modified the definition of an ESS by considering individually advantageous reduction from a majority deviation: he created the term continuous stability. A continuously stable ESS can be shown to be convergence stable, therefore it will act as an evolutionary attractor. But the nature of evolutionary trait spaces in biology means that it is not possible to guarantee that the region of convergence to the evolutionary attractor covers the whole of the trait space, nor that there is only one evolutionary attractor in a particular trait space. These issues have led to the emergence of the related fields of evolutionary dynamics, adaptive dynamics and evolutionary invasion analysis, all of which use differential equations to understand the dynamics in evolutionary trait spaces. Hence, if one or more evolutionary attractor exists in an evolutionary trait space, they provide techniques to understand the dynamics in that trait space around the evolutionary attractor. === Evolutionary attractors in an ecological context === Evolution in biology does not take place in single species in isolation. Ecological interaction of species leads to coevolution. Important examples of this are host-parasite or host-pathogen interaction, which can make both the dynamics around evolutionary attractors more complex, and the occurrence and number of evolutionary attractors more diverse. Evolutionary attractors have been identified in the analysis of evolutionary epidemiology of plant pathogens. In the above study working on plant populations the authors were able to identify evolutionary attractors using methods from adaptive dynamics. A model applied to the analysis of a maize (Zea mays L.) virus identified convergence stable equilibria through simulation modelling. A related model identified evolutionary attractors in the interaction of plants with fungal pathogens. === Evolutionary attractors in molecular genetics === As mentioned above much of the consideration of evolutionary attractors in biology has been through investigation of selection at a genetic or phenotypic level or both, in a single species or in coevolving species. Advances in the study of molecular genetics now allow the study of evolutionary attractors to be taken to a molecular genetic level. Wilson et. al (2019) studied the evolution of gene regulatory networks and identified the emergence of evolutionary attractors. == Evolutionary attractors in economics == Evolutionary game theory as applied in biology was inspired by game theory originally devised for applications in economics. Game theory remains an active field of research outside of biology, and thus it is not surprising that researchers in evolutionary economics use evolutionary game theory. Evolutionary attractors have been demonstrated by economists studying the evolutionary dynamics of market entry with market dynamics based on the replicator dynamics of biological evolutionary games. == Evolutionary attractors in computing == Evolutionary computation is a branch of computer science inspired by biological evolution. Many algorithms in evolutionary computation use a form of selection. Thus evolutionary attractors have been identified in computer science as well as in biology and economics. Evolutionary algorithms have generated evolutionary attractors, probably because of the similarity between adaptive hill-climbing in evolutionary heuristics and the adaptive landscape originated to explain evolution through natural selection.

  Read more →