AI Art Zeus

AI Art Zeus — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Message queuing service

  A message queueing service is a message-oriented middleware or MOM deployed in a compute cloud using software as a service model. Service subscribers access queues and or topics to exchange data using point-to-point or publish and subscribe patterns. It's important to differentiate between event-driven and message-driven (aka queue driven) services: Event-driven services (e.g. AWS SNS) are decoupled from their consumers. Whereas queue / message driven services (e.g. AWS SQS) are coupled with their consumers. Message queues can be a good buffer to handle spiky workloads but they have a finite capacity. According to Gregor Hohpe, message queues require proper mechanisms (aka flow controls) to avoid filling the queue beyond its manageable capacity and to keep the system stable. == Ordering Guarantees in Message Queues == Amazon SQS FIFO and Azure Service Bus sessions are queue-based messaging systems that provide ordering guarantees within a message group or session attempt but do not necessarily guarantee ordered delivery in cases of retries or failures. In SQS FIFO, messages in the same message group are processed in order, with subsequent messages held until the preceding message is successfully processed or moved to the dead-letter queue (DLQ). Once a message is placed in the DLQ, it is no longer retried, creating a gap in the sequence. However, the remaining messages continue to be delivered in order. Azure Service Bus sessions function similarly by maintaining ordering within a session, provided a single consumer processes messages sequentially. The implementation differs from SQS FIFO but follows the same fundamental ordering principle. In contrast, Apache Kafka is a distributed log-based messaging system that guarantees ordering within individual partitions rather than across the entire topic. Unlike queue-based systems, Kafka retains messages in a durable, append-only log, allowing multiple consumers to read at different offsets. Kafka uses manual offset management, giving consumers control over retries and failure handling. If a consumer fails to process a message, it can delay committing the offset, preventing further progress in that partition while other partitions remain unaffected. This partition-based design enables fault isolation and parallel processing while allowing ordering to be maintained within partitions, depending on consumer handling. == Vendors == Apache Kafka Apache Kafka is a distributed system consisting of servers that store and forward messages between producer client and consumer applications. IBM MQ IBM MQ offers a managed service that can be used on IBM Cloud and Amazon Web Services. Microsoft Azure Service Bus Service Bus offers queues, topics & subscriptions, and rules/actions in order to support publish-subscribe, temporal decoupling, and load balancing scenarios. Azure Service Bus is built on AMQP allowing any existing AMQP 1.0 client stack to interact with Service Bus directly or via existing .Net, Java, Node, and Python clients. Standard and Premium tiers allow for pay as you go or isolated resources at massive scale. Oracle Messaging Cloud Service This service provides a messaging solution for applications for asynchronous communication and is influenced by the Java Message Service (JMS) API specification. Any application platform that understands HTTP can also use Oracle Messaging Cloud Service through the REST interface. For Java applications, Oracle Messaging Cloud Service provides a Java library that implements and extends the JMS 1.1 interface. The Java library implements the JMS API by acting as a client of the REST API. Amazon Simple Queue Service Supports messages natively up to 256K, or up to 2GB by transmitting payload via S3. Highly scalable, durable and resilient. Provides loose-FIFO and 'at least once' delivery in order to provide massive scale. Supports REST API and optional Java Message Service client. Low latency. Utilizes Amazon Web Services. IronMQ Supports messages up to 64k; guarantees order; guarantees once only delivery; no delays retrieving messages. Supports REST API and beanstalkd open source protocol. Runs on multiple clouds including AWS and Rackspace. Scaling must be managed by user. RabbitMQ RabbitMQ is a reliable and mature messaging and streaming broker, which is easy to deploy on cloud environments, on-premises, and on your local machine. Supports AMQP, STOMP, MQTT StormMQ Open platform supports messages up to 50Mb. Uses AMQP to avoid vendor lock-in and provide language neutrality. Locate-It Option allows customers to audit the location of their data at all times and satisfy data protection principles. AnypointMQ An enterprise multi-tenant, cloud messaging service that performs advanced asynchronous messaging scenarios between applications. Anypoint MQ is fully integrated with Anypoint Platform, offering role based access control, client application management, and connectors.

  Read more →
• 

  List of C++ software and tools

  This is a list of notable software and programming tools for the C++ programming language, including libraries, web frameworks, programming language implementations, compilers, integrated development environments (IDEs), and other related software development utilities. == Compilers and IDEs == AMD Optimizing C/C++ Compiler — proprietary fork of LLVM + Clang for Linux C++Builder — rapid application development (RAD) environment Clang – compiler front end for C, C++, and Objective-C, part of LLVM CLion — C++ IDE by JetBrains Code::Blocks — open-source cross-platform IDE that supports multiple compilers including GCC, Clang and Visual C++ CodeLite — cross-platform IDE for the C/C++ programming languages using the wxWidgets toolkit CodeSynthesis XSD – XML Data Binding compiler Dev-C++ — MinGW or TDM-GCC 64bit port of the GCC as its compiler GCC – GNU Compiler Collection Intel C++ Compiler – proprietary high-performance compiler by Intel KDevelop — IDE part of the KDE project and is based on KDE Frameworks and Qt, the C/C++ backend uses Clang. Microsoft Visual C++ – proprietary C++ compiler and IDE for Windows Oracle Developer Studio — Solaris, OpenSolaris, RHEL, and Oracle Linux operating systems. Qt Creator — part of the SDK for the Qt GUI application development framework and uses the Qt API SlickEdit — text editor and IDE Turbo C++ – legacy C++ IDE and compiler popular in the 1990s Understand — IDE that enables static code analysis through an array of visuals, documentation, and metric tools. Visual Studio — integrated development environment by Microsoft that supports C++ Visual Studio Code — integrated development environment by Microsoft that supports C++ Xcode — Apple IDE to develop macOS, iOS, iPadOS, watchOS, tvOS, and visionOS that supports C++ source code. == Debuggers == Allinea DDT – a graphical debugger dbx — a proprietary source-level debugger GNU Debugger – portable debugger that runs on many Unix-like systems Modular Debugger — a C/C++ source level debugger for Solaris and derivates Undo LiveRecorder — time travel debugger == Libraries == Active Template Library – template-based C++ classes developed by Microsoft Apache MXNet — deep learning framework Apache Xerces – parsing, validating, and serializing and manipulating XML. Asio — networking and low-level I/O library Bitpit — scientific computing and mesh manipulation library Boost — collection of peer-reviewed libraries Botan — cryptography library C++ AMP – easy way to write programs that compile and execute on data-parallel hardware, such as graphics cards and GPUs C++ Standard Library — standard library for the language C++/WinRT — library for Microsoft's Windows Runtime platform, designed to provide access to modern Windows APIs. C3D Toolkit — geometric modeling kernel Caffe — deep learning framework CAPD — library for rigorous numerics and dynamical systems Cassowary — constraint-solving toolkit that efficiently solves systems of linear equalities and inequalities Cinder — library for creative coding ClanLib — cross-platform game SDK CMU Sphinx — speech recognition system Crypto++ — cryptographic algorithms library Dlib — general-purpose cross-platform library Dune — partial differential equations using grid-based methods fastText — text representation and text classification library FLTK — GUI toolkit Geospatial Data Abstraction Library — geospatial data access library GDCM — image library General Polygon Clipper — polygon clipping library GiNaC — computer algebra system that uses Class Library for Numbers for implementing arbitrary-precision arithmetic GLFW — OpenGL and window management library HarfBuzz — text rendering and typesetting library High Efficiency Image File Format — digital container format for storing individual digital images and image sequences ITK — image analysis library Integrated Performance Primitives — domain-specific functions that are highly optimized for diverse Intel architectures Jackets library — GPU computing library JSBSim — open-source flight dynamics model JUCE — framework for audio applications KDE Frameworks — collection of libraries from the KDE project KFRlib — digital signal processing framework LEMON — library for optimization and graph problems LevelDB — key–value database library Libdash — MPEG-DASH streaming library libLAS — reading and writing geospatial data encoded in the ASPRS laser (LAS) file format libsigc++ — typesafe callbacks LibRaw — free and open-source software library for reading raw files from digital cameras libSBML — application programming interface (API) for the SBML (Systems Biology Markup Language) LIBSVM — sequential minimal optimization (SMO) algorithm for kernelized support vector machines Libx — DirectX .X files graphics library Loki — collection of design patterns LIVE555 — multimedia streaming library Metakit — embedded database library Microsoft Cognitive Toolkit — deep learning toolkit Microsoft Foundation Class Library — object-oriented library for developing desktop applications for Windows Microsoft SEAL — homomorphic encryption library mlpack — machine learning and AI library Mobile Robot Programming Toolkit — robotics research library Object Windows Library — Object Windows Library, superseded by VCL Open Cascade — CAD and 3D modeling library Open Asset Import Library — 3D model import library to provide a common API for different 3D asset file formats OpenCV – computer vision and machine learning library OpenFOAM — computational fluid dynamics toolkit OpenH264 — real-time encoding and decoding video streams in the H.264/MPEG-4 AVC format OpenImageIO — image processing library Open Inventor — higher layer of programming for OpenGL OpenNN — neural networks library OpenVDB — sparse volume data library openFrameworks — creative coding toolkit OpenRTM-aist — robotics middleware library Oracle Template Library — database access that supports IBM Db2 and Open Database Connectivity Orfeo toolbox — remote sensing image processing library OR-Tools — operations research and optimization library Parallel Augmented Maps — ordered sets, ordered maps, and augmented maps. Parallel Patterns Library — Microsoft library that provides features for multicore programming PhysX — physics simulation engine POCO C++ Libraries — general-purpose libraries for software development Poppler — PDF rendering library Protocol Buffers — data serialization library Qt — cross-platform widget toolkit QuantLib — quantitative finance library RocksDB — key–value database library ROOT — data analysis framework from CERN ROS — robotics middleware Scintilla — source code editing component SDL – Simple DirectMedia Layer, cross-platform development library for multimedia applications SFML – Simple and Fast Multimedia Library Shark – open-source machine learning library Shogun — machine learning toolbox Skia — 2D graphics library Snappy — compression library Sound Object Library — music and audio development Standard Template Library — library of containers and algorithms Stapl — parallel computing library SymbolicC++ — symbolic computation library TerraLib — GIS library Tesseract OCR — optical character recognition engine Threading Building Blocks — parallel computing library ThreadWeaver — concurrency framework Tiny-dnn — lightweight deep learning library TinyXML — lightweight XML parser Tkrzw — key–value databases VTD-XML — XML processing library wxWidgets — cross-platform GUI toolkit x265 — video encoding library for HEVC XGBoost — gradient boosting library Windows Template Library — Win32 development === Mathematical and numerical libraries === == Tools == Akonadi — a C++/Qt framework and storage service for personal information management BALL – framework and set of algorithms and data structures for molecular modelling and computational structural bioinformatics Boehm garbage collector – conservative garbage collector CEGUI — C++ GUI library ClanLib – video game SDK CMake — cross-platform build system for C++ projects Confidential Consortium Framework – blockchain infrastructure framework DaviX – WebDAV client Doxygen — documentation generator for C++ and other languages FLTK — Fast Light Toolkit, cross-platform GUI library Fox toolkit — C++ GUI toolkit GDB — GNU Project debugger, often used with C and C++ gtkmm — official C++ interface for the popular GUI library GTK HOOPS Visualize — 3D computer graphics HPX — partitioned global address space Parallel programming Runtime System JUCE — cross-platform C++ audio and GUI framework LessTif — free clone of Motif GUI toolkit MFC — Microsoft Foundation Class library Nana — modern C++ GUI toolkit PTK Toolkit — 2D rendering engine and SDK, and portability options. Qt — cross-platform C++ GUI toolkit Rogue Wave — C++ GUI toolkit TnFOX — C++ GUI toolkit Ultimate++ — cross-platform C++ GUI framework Valgrind — tool suite for debugging and profiling C/C++ programs wxWidgets — cross-platform C++ GUI toolkit x265 — encoder for creating digital video streams in the High Efficiency Vid

  Read more →
• 

  Distributed file system for cloud

  A distributed file system for cloud is a file system that allows many clients to have access to data and supports operations (create, delete, modify, read, write) on that data. Each data file may be partitioned into several parts called chunks. Each chunk may be stored on different remote machines, facilitating the parallel execution of applications. Typically, data is stored in files in a hierarchical tree, where the nodes represent directories. There are several ways to share files in a distributed architecture: each solution must be suitable for a certain type of application, depending on how complex the application is. Meanwhile, the security of the system must be ensured. Confidentiality, availability and integrity are the main keys for a secure system. Users can share computing resources through the Internet thanks to cloud computing which is typically characterized by scalable and elastic resources – such as physical servers, applications and any services that are virtualized and allocated dynamically. Synchronization is required to make sure that all devices are up-to-date. Distributed file systems enable many big, medium, and small enterprises to store and access their remote data as they do local data, facilitating the use of variable resources. == Overview == === History === Today, there are many implementations of distributed file systems. The first file servers were developed by researchers in the 1970s. Sun Microsystem's Network File System became available in the 1980s. Before that, people who wanted to share files used the sneakernet method, physically transporting files on storage media from place to place. Once computer networks started to proliferate, it became obvious that the existing file systems had many limitations and were unsuitable for multi-user environments. Users initially used FTP to share files. FTP first ran on the PDP-10 at the end of 1973. Even with FTP, files needed to be copied from the source computer onto a server and then from the server onto the destination computer. Users were required to know the physical addresses of all computers involved with the file sharing. === Supporting techniques === Modern data centers must support large, heterogenous environments, consisting of large numbers of computers of varying capacities. Cloud computing coordinates the operation of all such systems, with techniques such as data center networking (DCN), the MapReduce framework, which supports data-intensive computing applications in parallel and distributed systems, and virtualization techniques that provide dynamic resource allocation, allowing multiple operating systems to coexist on the same physical server. === Applications === Cloud computing provides large-scale computing thanks to its ability to provide the needed CPU and storage resources to the user with complete transparency. This makes cloud computing particularly suited to support different types of applications that require large-scale distributed processing. This data-intensive computing needs a high performance file system that can share data between virtual machines (VM). Cloud computing dynamically allocates the needed resources, releasing them once a task is finished, requiring users to pay only for needed services, often via a service-level agreement. Cloud computing and cluster computing paradigms are becoming increasingly important to industrial data processing and scientific applications such as astronomy and physics, which frequently require the availability of large numbers of computers to carry out experiments. == Architectures == Most distributed file systems are built on the client-server architecture, but other, decentralized, solutions exist as well. === Client-server architecture === Network File System (NFS) uses a client-server architecture, which allows sharing of files between a number of machines on a network as if they were located locally, providing a standardized view. The NFS protocol allows heterogeneous clients' processes, probably running on different machines and under different operating systems, to access files on a distant server, ignoring the actual location of files. Relying on a single server results in the NFS protocol suffering from potentially low availability and poor scalability. Using multiple servers does not solve the availability problem since each server is working independently. The model of NFS is a remote file service. This model is also called the remote access model, which is in contrast with the upload/download model: Remote access model: Provides transparency, the client has access to a file. He sends requests to the remote file (while the file remains on the server). Upload/download model: The client can access the file only locally. It means that the client has to download the file, make modifications, and upload it again, to be used by others' clients. The file system used by NFS is almost the same as the one used by Unix systems. Files are hierarchically organized into a naming graph in which directories and files are represented by nodes. === Cluster-based architectures === A cluster-based architecture ameliorates some of the issues in client-server architectures, improving the execution of applications in parallel. The technique used here is file-striping: a file is split into multiple chunks, which are "striped" across several storage servers. The goal is to allow access to different parts of a file in parallel. If the application does not benefit from this technique, then it would be more convenient to store different files on different servers. However, when it comes to organizing a distributed file system for large data centers, such as Amazon and Google, that offer services to web clients allowing multiple operations (reading, updating, deleting,...) to a large number of files distributed among a large number of computers, then cluster-based solutions become more beneficial. Note that having a large number of computers may mean more hardware failures. Two of the most widely used distributed file systems (DFS) of this type are the Google File System (GFS) and the Hadoop Distributed File System (HDFS). The file systems of both are implemented by user level processes running on top of a standard operating system (Linux in the case of GFS). ==== Design principles ==== ===== Goals ===== Google File System (GFS) and Hadoop Distributed File System (HDFS) are specifically built for handling batch processing on very large data sets. For that, the following hypotheses must be taken into account: High availability: the cluster can contain thousands of file servers and some of them can be down at any time A server belongs to a rack, a room, a data center, a country, and a continent, in order to precisely identify its geographical location The size of a file can vary from many gigabytes to many terabytes. The file system should be able to support a massive number of files The need to support append operations and allow file contents to be visible even while a file is being written Communication is reliable among working machines: TCP/IP is used with a remote procedure call RPC communication abstraction. TCP allows the client to know almost immediately when there is a problem and a need to make a new connection. ===== Load balancing ===== Load balancing is essential for efficient operation in distributed environments. It means distributing work among different servers, fairly, in order to get more work done in the same amount of time and to serve clients faster. In a system containing N chunkservers in a cloud (N being 1000, 10000, or more), where a certain number of files are stored, each file is split into several parts or chunks of fixed size (for example, 64 megabytes), the load of each chunkserver being proportional to the number of chunks hosted by the server. In a load-balanced cloud, resources can be efficiently used while maximizing the performance of MapReduce-based applications. ===== Load rebalancing ===== In a cloud computing environment, failure is the norm, and chunkservers may be upgraded, replaced, and added to the system. Files can also be dynamically created, deleted, and appended. That leads to load imbalance in a distributed file system, meaning that the file chunks are not distributed equitably between the servers. Distributed file systems in clouds such as GFS and HDFS rely on central or master servers or nodes (Master for GFS and NameNode for HDFS) to manage the metadata and the load balancing. The master rebalances replicas periodically: data must be moved from one DataNode/chunkserver to another if free space on the first server falls below a certain threshold. However, this centralized approach can become a bottleneck for those master servers, if they become unable to manage a large number of file accesses, as it increases their already heavy loads. The load rebalance problem is NP-hard. In order to get a large number of chunkservers to work in collaboration, and to

  Read more →
• 

  Availability zone

  In cloud computing, an availability region is a group of data centres that are located in the same geographical region. Availability regions comprise multiple availability zones, which are groups of data centres that are located far enough from each other to prevent large-scale outages in the event of failure of a single zone, whilst still being close enough to each other to enable low-latency connections. Distributed systems spanning multiple availability zones allow for high availability, even in the event of catastrophic failure, such as natural disasters. Services offering distinct availability zones include Amazon Web Services, Microsoft Azure and Google Cloud.

  Read more →
• 

  Algorithm selection

  Algorithm selection (sometimes also called per-instance algorithm selection or offline algorithm selection) is a meta-algorithmic technique to choose an algorithm from a portfolio on an instance-by-instance basis. It is motivated by the observation that on many practical problems, different algorithms have different performance characteristics. That is, while one algorithm performs well in some scenarios, it performs poorly in others and vice versa for another algorithm. If we can identify when to use which algorithm, we can optimize for each scenario and improve overall performance. This is what algorithm selection aims to do. The only prerequisite for applying algorithm selection techniques is that there exists (or that there can be constructed) a set of complementary algorithms. == Definition == Given a portfolio P {\displaystyle {\mathcal {P}}} of algorithms A ∈ P {\displaystyle {\mathcal {A}}\in {\mathcal {P}}} , a set of instances i ∈ I {\displaystyle i\in {\mathcal {I}}} and a cost metric m : P × I → R {\displaystyle m:{\mathcal {P}}\times {\mathcal {I}}\to \mathbb {R} } , the algorithm selection problem consists of finding a mapping s : I → P {\displaystyle s:{\mathcal {I}}\to {\mathcal {P}}} from instances I {\displaystyle {\mathcal {I}}} to algorithms P {\displaystyle {\mathcal {P}}} such that the cost ∑ i ∈ I m ( s ( i ) , i ) {\displaystyle \sum _{i\in {\mathcal {I}}}m(s(i),i)} across all instances is optimized. == Examples == === Boolean satisfiability problem (and other hard combinatorial problems) === A well-known application of algorithm selection is the Boolean satisfiability problem. Here, the portfolio of algorithms is a set of (complementary) SAT solvers, the instances are Boolean formulas, the cost metric is for example average runtime or number of unsolved instances. So, the goal is to select a well-performing SAT solver for each individual instance. In the same way, algorithm selection can be applied to many other N P {\displaystyle {\mathcal {NP}}} -hard problems (such as mixed integer programming, CSP, AI planning, TSP, MAXSAT, QBF and answer set programming). Competition-winning systems in SAT are SATzilla, 3S and CSHC === Machine learning === In machine learning, algorithm selection is better known as meta-learning. The portfolio of algorithms consists of machine learning algorithms (e.g., Random Forest, SVM, DNN), the instances are data sets and the cost metric is for example the error rate. So, the goal is to predict which machine learning algorithm will have a small error on each data set. == Instance features == The algorithm selection problem is mainly solved with machine learning techniques. By representing the problem instances by numerical features f {\displaystyle f} , algorithm selection can be seen as a multi-class classification problem by learning a mapping f i ↦ A {\displaystyle f_{i}\mapsto {\mathcal {A}}} for a given instance i {\displaystyle i} . Instance features are numerical representations of instances. For example, we can count the number of variables, clauses, average clause length for Boolean formulas, or number of samples, features, class balance for ML data sets to get an impression about their characteristics. === Static vs. probing features === We distinguish between two kinds of features: Static features are in most cases some counts and statistics (e.g., clauses-to-variables ratio in SAT). These features ranges from very cheap features (e.g. number of variables) to very complex features (e.g., statistics about variable-clause graphs). Probing features (sometimes also called landmarking features) are computed by running some analysis of algorithm behavior on an instance (e.g., accuracy of a cheap decision tree algorithm on an ML data set, or running for a short time a stochastic local search solver on a Boolean formula). These feature often cost more than simple static features. === Feature costs === Depending on the used performance metric m {\displaystyle m} , feature computation can be associated with costs. For example, if we use running time as performance metric, we include the time to compute our instance features into the performance of an algorithm selection system. SAT solving is a concrete example, where such feature costs cannot be neglected, since instance features for CNF formulas can be either very cheap (e.g., to get the number of variables can be done in constant time for CNFs in the DIMACs format) or very expensive (e.g., graph features which can cost tens or hundreds of seconds). It is important to take the overhead of feature computation into account in practice in such scenarios; otherwise a misleading impression of the performance of the algorithm selection approach is created. For example, if the decision which algorithm to choose can be made with perfect accuracy, but the features are the running time of the portfolio algorithms, there is no benefit to the portfolio approach. This would not be obvious if feature costs were omitted. == Approaches == === Regression approach === One of the first successful algorithm selection approaches predicted the performance of each algorithm m ^ A : I → R {\displaystyle {\hat {m}}_{\mathcal {A}}:{\mathcal {I}}\to \mathbb {R} } and selected the algorithm with the best predicted performance a r g min A ∈ P m ^ A ( i ) {\displaystyle arg\min _{{\mathcal {A}}\in {\mathcal {P}}}{\hat {m}}_{\mathcal {A}}(i)} for an instance i {\displaystyle i} . === Clustering approach === A common assumption is that the given set of instances I {\displaystyle {\mathcal {I}}} can be clustered into homogeneous subsets and for each of these subsets, there is one well-performing algorithm for all instances in there. So, the training consists of identifying the homogeneous clusters via an unsupervised clustering approach and associating an algorithm with each cluster. A new instance is assigned to a cluster and the associated algorithm selected. A more modern approach is cost-sensitive hierarchical clustering using supervised learning to identify the homogeneous instance subsets. === Pairwise cost-sensitive classification approach === A common approach for multi-class classification is to learn pairwise models between every pair of classes (here algorithms) and choose the class that was predicted most often by the pairwise models. We can weight the instances of the pairwise prediction problem by the performance difference between the two algorithms. This is motivated by the fact that we care most about getting predictions with large differences correct, but the penalty for an incorrect prediction is small if there is almost no performance difference. Therefore, each instance i {\displaystyle i} for training a classification model A 1 {\displaystyle {\mathcal {A}}_{1}} vs A 2 {\displaystyle {\mathcal {A}}_{2}} is associated with a cost | m ( A 1 , i ) − m ( A 2 , i ) | {\displaystyle |m({\mathcal {A}}_{1},i)-m({\mathcal {A}}_{2},i)|} . == Requirements == The algorithm selection problem can be effectively applied under the following assumptions: The portfolio P {\displaystyle {\mathcal {P}}} of algorithms is complementary with respect to the instance set I {\displaystyle {\mathcal {I}}} , i.e., there is no single algorithm A ∈ P {\displaystyle {\mathcal {A}}\in {\mathcal {P}}} that dominates the performance of all other algorithms over I {\displaystyle {\mathcal {I}}} (see figures to the right for examples on complementary analysis). In some application, the computation of instance features is associated with a cost. For example, if the cost metric is running time, we have also to consider the time to compute the instance features. In such cases, the cost to compute features should not be larger than the performance gain through algorithm selection. == Application domains == Algorithm selection is not limited to single domains but can be applied to any kind of algorithm if the above requirements are satisfied. Application domains include: hard combinatorial problems: SAT, Mixed Integer Programming, CSP, AI Planning, TSP, MAXSAT, QBF and Answer Set Programming combinatorial auctions in machine learning, the problem is known as meta-learning software design black-box optimization multi-agent systems numerical optimization linear algebra, differential equations evolutionary algorithms vehicle routing problem power systems For an extensive list of literature about algorithm selection, we refer to a literature overview. == Variants of algorithm selection == === Online selection === Online algorithm selection refers to switching between different algorithms during the solving process. This is useful as a hyper-heuristic. In contrast, offline algorithm selection selects an algorithm for a given instance only once and before the solving process. === Computation of schedules === An extension of algorithm selection is the per-instance algorithm scheduling problem, in which we do not select only one solver, but we select a time budget for each algorithm

  Read more →
• 

  EasyChair

  EasyChair is a web-based conference management software system. It has been used since 2002 in the scientific community for tasks such as organising research paper submission and review. In 2012, EasyChair added an open access online publication service for conference proceedings. == Description == EasyChair is a paid web-based conference management software system used, among other tasks, to organize paper submission and review, similar to other event management system software such as OpenConf. EasyChair used to be run by the Department of Computer Science at the University of Manchester but now it is a commercial service, owned by EasyChair Ltd. in Stockport (established 2016). EasyChair used to be free, for standard service, but as of 2022, only minimal services are free. The EasyChair website also provides an open access online publication service for conference proceedings. When launched in 2012, the service was for computer science only, but in 2016 it was expanded to all sciences. == History == The EasyChair software has been in continuous development since 2002. As of 2015, the code base consists of nearly 300,000 lines of code, and it has been used by more than 41,000 conferences. More than two and a half million users in the scientific community reported using it in 2019.

  Read more →
• 

  Caspio

  Caspio, Inc. is an American software company providing a low-code platform for building cloud-based business applications. Founded in 2000 by Frank Zamani, the company is headquartered in Sunnyvale, California, with operations in Poland, the Philippines, and Spain. Caspio’s platform allows organizations to create online database applications and workflow tools without extensive coding. == History == Caspio was founded by Frank Zamani in 2000. The company initially focused on simplifying custom cloud applications and reducing development time and cost as compared to traditional software development. Caspio released the first version of its platform, Caspio Bridge, in 2001. In 2014, Caspio released a HIPAA-Compliant Edition of its low-code application development platform. Caspio also released an EU General Data Protection Regulation (GDPR) Compliance Edition of its low-code application development platform in 2016. Caspio's second European Software Development Center opened in Kraków, Poland in 2017. In 2019, Forrester Research listed Caspio and three other platforms in its highest of four ranked tiers of twelve low-code platforms for business developers based on rankings of offerings and strategy at that time. Caspio also opened data centers in Montreal, Canada and India in 2020.

  Read more →
• 

  FedRAMP

  The Federal Risk and Authorization Management Program (FedRAMP) is a United States federal government-wide compliance program that provides a standardized approach to security assessment, authorization, and continuous monitoring for cloud products and services. The US government describes FedRAMP as FISMA for the cloud. == Overview == The FedRAMP PMO mission is to promote the adoption of secure cloud services across the federal government by providing a standardized approach to security and risk assessment. Per the OMB memorandum, any cloud services that hold federal data must be FedRAMP authorized. FedRAMP prescribes the security requirements and processes that cloud service providers must follow in order for the government to use their service. There are two ways to authorize a cloud service through FedRAMP: a Joint Authorization Board (JAB) provisional authorization (P-ATO), and through individual agencies. FedRAMP provides accreditation for cloud services for the various cloud offering models which are Infrastructure as a Service (IaaS), Platform as a Service (PaaS), and Software as a Service, (SaaS). == History == In 2011, the Office of Management and Budget (OMB) released a memorandum establishing FedRAMP "to provide a cost-effective, risk-based approach for the adoption and use of cloud services to Executive departments and agencies." The General Services Administration (GSA) established the FedRAMP Program Management Office (PMO) in June 2012. Before the introduction of FedRAMP, individual federal agencies managed their own assessment methodologies following guidance set by the Federal Information Security Management Act of 2002. == Governance and applicable laws == FedRAMP is governed by different Executive Branch entities that collaborate to develop, manage, and operate the program. These entities include: The Office of Management and Budget (OMB): The governing body that issued the FedRAMP policy memo, which defines the key requirements and capabilities of the program The Joint Authorization Board (JAB): The primary governance and decision-making body for FedRAMP comprises the chief information officers (CIOs) from the Department of Homeland Security (DHS), General Services Administration (GSA), and Department of Defense (DOD) The National Institute of Standards and Technology (NIST): Advises FedRAMP on FISMA compliance requirements and assists in developing the standards for the accreditation of independent 3PAOs The Department of Homeland Security (DHS): Manages the FedRAMP continuous monitoring strategy including data feed criteria, reporting structure, threat notification coordination, and incident response The Federal Chief Information Officers (CIO) Council: Disseminates FedRAMP information to Federal CIOs and other representatives through cross-agency communications and events The FedRAMP PMO: Established within GSA and responsible for the development of the FedRAMP program, including the management of day-to-day operations There are several laws, mandates, and policies that are foundational to FedRAMP. FISMA–the Federal Information Security Modernization Act–requires that agencies authorize the information systems that they use. The US government describes FedRAMP as FISMA for the cloud. The FedRAMP Policy Memo requires federal agencies to use FedRAMP when assessing, authorizing, and continuously monitoring cloud services in order to aid agencies in the authorization process as well as save government resources and eliminate duplicative efforts. FedRAMP's security baselines are derived from NIST SP 800-53 (as revised) with a set of control enhancements that pertain to the unique security requirements of cloud computing. == Third-party assessment organizations == Third-party assessment organizations (3PAOs) play a critical role in the FedRAMP security assessment process, as they are the independent assessment organizations that verify cloud providers' security implementations and provide the overall risk posture of a cloud environment for a security authorization decision. Accredited by the American Association for Laboratory Accreditation (A2LA), these assessment organizations must demonstrate independence and the technical competence required to test security implementations and collect representative evidence. == FedRAMP Marketplace == The FedRAMP Marketplace provides a searchable, sortable database of Cloud Service Offerings (CSOs) that have achieved a FedRAMP designation. 3PAOs, accredited auditors that can perform the FedRAMP assessment, are listed within the Marketplace. The FedRAMP Marketplace is maintained by the FedRAMP Program Management Office (PMO). == Security and authorization concerns == A 2026 ProPublica investigation found that FedRAMP entered into a partnership with Microsoft despite considerable concerns about the security of its cloud technology.

  Read more →
• 

  Cybernetic Serendipity

  Cybernetic Serendipity was an exhibition of cybernetic art curated by Jasia Reichardt, shown at the Institute of Contemporary Arts, London, England, from 2 August to 20 October 1968, and then toured across the United States. Two stops in the United States were the Corcoran Annex (Corcoran Gallery of Art), Washington, D.C., from 16 July to 31 August 1969, and the newly opened Exploratorium in San Francisco, from 1 November to 18 December 1969. == Content == One part of the exhibition was concerned with algorithms and devices for generating music. Some exhibits were pamphlets describing the algorithms, whilst others showed musical notation produced by computers. Devices made musical effects and played tapes of sounds made by computers. Peter Zinovieff lent part of his studio equipment - visitors could sing or whistle a tune into a microphone and his equipment would improvise a piece of music based on the tune. Another part described computer projects such as Gustav Metzger's self-destructive Five Screens With Computer, a design for a new hospital, a computer programmed structure, and dance choreography. The machines and installations were a very noticeable part of the exhibition. Gordon Pask produced a collection of large mobiles (Colloquy of Mobiles (1968)) with interacting parts that let the viewers join in the conversation. Many machines formed kinetic environments or displayed moving images. Bruce Lacey contributed his radio-controlled robots and a light-sensitive owl. Nam June Paik was represented by Robot K-456 and televisions with distorted images. Jean Tinguely provided two of his painting machines. Edward Ihnatowicz's biomorphic hydraulic ear (Sound Activated Mobile (SAM, 1968)) turned toward sounds and John Billingsley's Albert 1967 turned to face light. Wen-Ying Tsai presented his interactive cybernetic sculptures of vibrating stainless-steel rods, stroboscopic light, and audio feedback control. Several artists exhibited machines that drew patterns that the visitor could take away, or involved visitors in games. Cartoonist Rowland Emett designed the mechanical computer Forget-me-not, which was commissioned by Honeywell. Another section explored the computer's ability to produce text - both essays and poetry. Different programs produced Haiku, children's stories, and essays. One of the first computer-generated poems, by Alison Knowles and James Tenney, was included in the exhibition and catalogue. Computer-generated movies were represented by John Whitney's Permutations and a Bell Labs movie on their technology for producing movies. Some samples included images of tesseracts rotating in four dimensions, a satellite orbiting the Earth, and an animated data structure. Computer graphics were also represented, including pictures produced on cathode ray oscilloscopes and digital plotters. There was a variety of posters and graphics demonstrating the power of computers to do complex (and apparently random) calculations. Other graphics showed a simulated Mondrian and the iconic decreasing squares spiral that appeared on the exhibition's poster and book. The Boeing Company exhibited their use of wireframe graphics. The innovative computer-generated sculpture, Quad 1, was displayed at the Cybernetic Serendipity exhibit. Created by the American abstract expressionist sculptor, Robert Mallary, in 1968, Quad 1 is widely believed to be the world's first Computer Aided Design sculpture. Keith Albarn & Partners contributed to the design of the exhibition. Reflecting the prominence of music in the show, a ten-track album Cybernetic Serendipity Music was released by the ICA to accompany the show. Artists featured included Iannis Xenakis, John Cage, and Peter Zinovieff, a detail of whose graphic score for 'Four Sacred April Rounds’ (1968) was used as the cover artwork. == Attendance == Time magazine noted that there had been 40,000 visitors to the London exhibition. Other reports suggested visitor numbers were as high as 44,000 to 60,000. However, the ICA did not accurately count visitors. == After-effects == The exhibition provided the energy for the formation of British Computer Arts Society which continued to explore the interaction between science, technology and art, and put on exhibitions (for example Event One at the Royal College of Art). Several pieces were purchased by the Exploratorium in 1971, some of which are on display to this day. In 2014 the ICA held a retrospective exhibition Cybernetic Serendipity: A Documentation which included documents, installation photographs, press reviews and publications and a series of discussions in one of which Peter Zinovieff took part. To coincide with the exhibition, Cybernetic Serendipity Music was re-released as a limited-edition vinyl LP by The Vinyl Factory. The Victoria and Albert Museum marked the 50th anniversary with an exhibition in 2018 entitled "Chance and Control: Art in the Age of Computers". The V&A exhibition included many works by artists who featured in the original ICA show, plus related ephemera. "Chance and Control" subsequently toured to Chester Visual Arts and Firstsite, Colchester. In 2020, The Centre Pompidou exhibited the replica of Gordon Pask's 1968 Colloquy of Mobiles, reproduced by Paul Pangaro and TJ McLeish in 2018. In 2022 the Australian National University's School of Cybernetics launched the school by presenting an exhibition Australian Cybernetic: a point through time. The exhibition included works from Cybernetic Serendipity (1968), Australia ‘75: Festival of Creative Arts and Science (1975), and contemporary pieces curated by the School of Cybernetics. In describing Reichardt's Cybernetic Serendipity exhibition the school stated that it "represented points of expanding the cybernetic imagination" and was a "ground-breaking" "glimpse of a future in which computers were entangled with people and cultures, and through this she fashioned a blueprint for the future of computing that has since inspired generations".

  Read more →
• 

  GNU social

  GNU social (and its predecessor StatusNet) is a largely defunct free and open-source microblogging social networking service that implements the OStatus and ActivityPub standards for interoperability between installations. While offering similar functionality to social networks such as Twitter, GNU social seeks to provide the ability for open and federated communication between different microblogging communities, known as 'instances'. Both enterprises and individuals can install and control their own instances and user data. At its peak in popularity, GNU social had been deployed on hundreds of interconnected instances, however has since fallen into disuse as competing software like Mastodon and Pleroma have taken its position as the dominant federated microblogging services. Later on in its lifespan, the project split into two separate branches, with "v2" being a continuation of the original codebase for maintenance of existing instances, with "v3" being a complete redesign of the project meant to integrate further ActivityPub support and modernization of the user experience and its technological back-end. As of August 15, 2022, there had been no new commits to the v2 branch, with the v3 branch also no longer being actively developed not long after by November 25, 2022, with the project essentially abandoned. Despite its modern obsolescence and dated design compared to modern platforms, GNU social and StatusNet is regarded to be the origin of the Fediverse network and has had a major influence on the design of more modern decentralized social networks that succeeded it. == History == While being the main project within its lineage, GNU social originally began as a fork of StatusNet. The software was first developed for a service called identi.ca from Evan Prodromou, which offered free microblogging accounts to the public. The software quickly became one of the first popular examples of a decentralized social network, as identi.ca allowed any other server that was running the software to communicate with it, something which had not previously been attempted before in social media at such a large scale. === StatusNet === Originally, StatusNet (named Laconica at the time) was launched with a communication protocol designed specifically for the project called OpenMicroBlogging (OMB). With version 0.8.1, the name of the software was changed to StatusNet. Version 0.9.0 was released soon after in March 3, 2010, with the developers implementing a newly designed protocol dubbed OStatus, with support for OMB being dropped not long after. Compared to OpenMicroBlogging, OStatus could handle and federate more events and actions than the basic plaintext communication that OMB provided and was based on a variety of other web technologies, allowing for easier adoption of new implementations of the protocol for servers and clients compared to the fully custom architecture of OMB. With the StatusNet name change, the company developing both the software and OStatus as well as managing identi.ca rebranded from Control Yourself to StatusNet Inc. In August 2010, the company raised a new round of venture capital funds to establish a hosting service under the status.net domain from sources such as First Mark Capital, BOLDstart Ventures, iNovia Capital and Montreal Start Up, raising over $2.3 million in funding up to that point. The hosting service allowed anyone to establish their own StatusNet instance without maintaining a server, similar to WordPress.com and other blogging platforms. New registrations on identi.ca along with the ability to create new status.net instances was disabled in December 2012, in preparation for a migration to pump.io that has since been named by users of StatusNet and OStatus as "the Pumpocalypse". pump.io was a brand new software package like StatusNet, but with a new protocol designed for general purpose activity streams outside of microblogging and ease-of-use for developers building on the technology, much like the transition from OMB to OStatus. The announcement was seen as unexpected among identi.ca users, who were concerned about the possibility of their statuses being deleted with the transition. At the same time, server administrators running third-party instances and their users who were left behind on StatusNet were also worried, as it was unclear at the time whether future development of the software would be picked up by a new maintainer. The transition for identi.ca users to pump.io was completed on 12 July 2013. ==== Previous names ==== The original name of StatusNet was Laconica, a reference to the Laconic phrase; a particularly brief statement commonly attributed to the leaders of Sparta (Laconia being the Greek region containing Sparta). In microblogging, all messages are designed to be very short due to the traditional 140-character limit on message size, a limitation imported from SMS. Beginning with version 0.8.1, the name was changed to StatusNet. The developers said that the new name "simply reflects what our software does: send status updates into your social network." === GNU social === GNU social originally began as a side project of GNU FM (Libre.fm) maintainer Matt Lee, with the goal of being able to federate messages between Last.fm and other instances of GNU FM using StatusNet plugins. Around the same time, a developer named Mikael Nordfeldth forked StatusNet with the intention of maintaining it as a personal project, dubbing it "Free Social". However, following identi.ca's transition to pump.io and its developers' sudden abandonment of StatusNet, the projects received more attention from server administrators and other users looking for an actively updated alternative. Shortly after LibrePlanet 2012, a plan was formed to merge all three projects into a single service. On June 8, 2013, it was announced that along with Free Social, StatusNet would be merged into the GNU social project and stewarded by the Free Software Foundation, with the project since becoming the dominant variant of StatusNet. During GNU social's lifespan, a popular theme for the user interface named Quitter was used, which was similar to an earlier Twitter interface. Many instances were made specifically using the name Quitter such as Quitter.se, an instance created by the developer of the theme. Before the establishment of Mastodon's popularity and dominance within the network, Quitter was noted as a frequent location for users of Twitter to migrate to when users disagreed with moderation policies or feature updates, such as when an algorithmic feed was added to Twitter. A fork of GNU social was made called postActiv, which planned to rewrite the backend and user interface of GNU social, as well as to add compatibility for Diaspora's protocol. == Features == A basic GNU social instance takes the form of a microblogging service with a reverse chronological timeline that features status updates and small messages from followed accounts, similar to other services such as Twitter or Weibo. While users could see their own customized timeline, they could access another timeline that showcased every message that the instance knows of, including from other instances that were connected to each other if someone on the instance followed an account from it. Users could also create and join groups, which allows for discussion and collaboration on specific topics. Administrators can also customize their server via the plugin system, which allows developers to create new features or modify existing plugins to suit the needs of the instance via PHP. A notable plugin built for GNU social was Quitter, a revamp of the user interface that resembles an earlier version of Twitter's user interface.

  Read more →
• 

  Mentimeter

  Mentimeter (or Menti for short) is a Swedish company based in Stockholm that develops and maintains an eponymous app used to create presentations with real-time feedback. == Foundation and background == Based in Stockholm, Sweden, the Mentimeter app was started by Swedish entrepreneur Johnny Warström and Niklas Ingvar as a response to unproductive meetings. The initial start-up budget was $500,000 raised by a group of prominent investors, including Per Appelgren in 2014, following the market's tendency to invest in Scandinavia. The app also focuses on online collaboration for the education sector, allowing students or public members to answer questions anonymously. The app enables users to share knowledge and real-time feedback on mobile devices with presentations, polls or brainstorming sessions in classes, meetings, gatherings, conferences and other group activities. == Achievements == By 2021, Mentimeter had over 270 million users and was one of Sweden's fastest-growing startups. The company also ranked #10 on 20 Fastest Growing 500 Startups Batch 16 Companies. It was ranked Stockholm's fastest growing company of the 2018 edition of the DI Gasell Award. Mentimeter has a freemium business model.

  Read more →
• 

  Web Dynpro

  Web Dynpro (WD) is a web application technology developed by SAP SE that focuses on the development of server-side business applications. For modern releases (for instance as of NetWeaver 750, software layer SAP_UI) the user interface is rendered according to the HTML5 web standard. Since Netweaver 754 (software layer SAP_UI, ABAP Platform 1909) a touch enabled user interface is available. The newly released versions usually follow the SAP Fiori design principles. One of its main design features is that the user interface is defined in an entirely declarative manner. Web Dynpro applications can be developed using either the Java (Web Dynpro for Java, WDJ or WD4J) or ABAP (Web Dynpro ABAP, WDA or WD4A) development infrastructure. == Overview == The earliest version of Web Dynpro appeared in 2003 and was based on Java. This variant was released approximately 18 months before the ABAP variant. As of 2010, the Java variant of Web Dynpro was put into maintenance mode. WD follows a design architecture based on an interpretation of the MVC design pattern and uses a model driven development approach ("minimize coding, maximize design"). The Web Dynpro Framework is a server-side runtime environment into which many dedicated "hook methods" are available. The developer then places their own custom coding within these hook methods in order to implement the desired business functionality. These hook methods belong to one of the broad categories of either "life-cycle" and "round-trip"; that is, those methods that are concerned with the life-cycle of a software component (i.e. processing that takes place at start up and shut down etc.), and those methods that are concerned with processing the fixed sequence of events that take place during a client-initiated round trip to the server. Web Dynpro is aimed at the development of business applications that follow standardized UI principles, applications that connect to backend systems and which are scalable. Key Capabilities Declarative way of development: Web Dynpro offers a graphical and declarative means of UI development. UI controls, building blocks, views and windows are modeled, and the business logic can be coded separately. Separation of user interface and business logic: One advantage of Web Dynpro over SAP GUI is the separation between business logic and user interface, and the structured development process with less implementation effort. Support of stateful application: The state of the application is kept in the back-end. This leads to a reduced data transfer from ABAP server to browser and vice versa. Regarding Web Dynpro ABAP there is only one programming language (ABAP) and only one system necessary. Therefore, development can be easier and cost efficient.

  Read more →
• 

  Read the Docs

  Read the Docs is an open-sourced free software documentation hosting platform. It generates documentation written with the Sphinx documentation generator, MkDocs, or Jupyter Book. == History == The site was created in 2010 by Eric Holscher, Bobby Grace, and Charles Leifer. On March 9, 2011, the Python Software Foundation Board awarded a grant of US$840 to the Read the Docs project for one year of hosting fees. On November 13, 2017, the Linux Mint project announced that they were moving their documentation to Read the Docs. In 2020, Read the Docs received a $200,000 grant from the Chan Zuckerberg Initiative. For 2021, Read the Docs reported 700 million page views and 196 million unique visitors. In 2013, a "Write the Docs" conference for Read the Docs users was launched, which has since turned into a generic software-documentation community. As of 2024, it continues to hold annual global conferences, organize local meetups, and maintain a Slack channel for "people who care about documentation."

  Read more →
• 

  TAChart

  TAChart is a component for the Lazarus IDE that provides charting services. Similar to Tchart and Teechart for Delphi it supports a collection of different chart types including bar charts, pie charts, line charts and point series. Apart from a screen canvas, output is possible in form of SVG, OpenGL, printer, WMF, and other formats. TAChart is bundled with the Lazarus Component Library. Although not intended to be a TChart clone, why its usage differs in certain points, its basic functionality is very similar and some source code written for TeeChart may be reused. == History == The first version of TAChart was developed by Philippe Martinole for the TeleAuto project, a program for automation of astronomic observations. Later functionality was introduced by Luis Rodrigues while porting the Epanet application from Delphi to Lazarus. In the ensuing years the code has extensively rewritten, expanded and is now maintained by Alexander Klenin. == Data sources == TAChart is able to use input from various sources. Examples include lists of real values, user defined buffers in the computer's memory, vectors of random values, fields in databases, calculated values provided by pre-defined functions and results of embedded code written in Pascal Script

  Read more →
• 

  List of .NET libraries and frameworks

  This article contains a list of libraries that can be used in .NET languages. These languages require .NET Framework, Mono, or .NET, which provide a basis for software development, platform independence, language interoperability and extensive framework libraries. Standard Libraries (including the Base Class Library) are not included in this article. == Introduction == Apps created with .NET Framework or .NET run in a software environment known as the Common Language Runtime (CLR), an application virtual machine that provides services such as security, memory management, and exception handling. The framework includes a large class library called Framework Class Library (FCL). Thanks to the hosting virtual machine, different languages that are compliant with the .NET Common Language Infrastructure (CLI) can operate on the same kind of data structures. These languages can therefore use the FCL and other .NET libraries that are also written in one of the CLI compliant languages. When the source code of such languages are compiled, the compiler generates platform-independent code in the Common Intermediate Language (CIL, also referred to as bytecode), which is stored in CLI assemblies. When a .NET app runs, the just-in-time compiler (JIT) turns the CIL code into platform-specific machine code. To improve performance, .NET Framework also comes with the Native Image Generator (NGEN), which performs ahead-of-time compilation to machine code. This architecture provides language interoperability. Each language can use code written in other languages. Calls from one language to another are exactly the same as would be within a single programming language. If a library is written in one CLI language, it can be used in other CLI languages. Moreover, apps that consist only of pure .NET assemblies, can be transferred to any platform that contains an implementation of CLI and run on that platform. For example, apps written using .NET can run on Windows, macOS, and various versions of Linux. .NET apps or their libraries, however, may depend on native platform features, e.g. COM. As such, platform independence of .NET apps depends on the ability to transfer necessary native libraries to target platforms. In 2019, the Windows Forms and Windows Presentation Foundation portions of .NET Framework were made open source. === .NET implementations === There are four primary .NET implementations that are actively developed and maintained: .NET Framework: The original .NET implementation that has existed since 2002. While not yet discontinued, Microsoft does not plan on releasing its next major version, 5.0. Mono: A cross-platform implementation of .NET Framework by Ximian, introduced in 2004. It is free and open-source. It is now developed by Xamarin, a subsidiary of Microsoft. Universal Windows Platform (UWP): An implementation of .NET used for building UWP apps. It's designed to unify development for different targeted types of devices, including PCs, tablets, phablets, phones, and the Xbox. .NET: A cross-platform re-implementation of .NET Framework, introduced in 2016 and initially called .NET Core. It is free and open-source. .NET superseded .NET Framework with the release of .NET 5. Each implementation of .NET includes the following components: One or more runtime environments, e.g. Common Language Runtime (CLR) for .NET Framework and CoreCLR for .NET A class library The .NET Standard is a set of common APIs that are implemented in the Base Class Library of any .NET implementation. The class library of each implementation must implement the .NET Standard, but may also implement additional APIs. Traditionally, .NET apps targeted a certain version of a .NET implementation, e.g. .NET Framework 4.6. Starting with the .NET Standard, an app can target a version of the .NET Standard and then it could be used (without recompiling) by any implementation that supports that level of the standard. This enables portability across different .NET implementations. The following table lists the .NET implementations that adhere to the .NET Standard and the version number at which each implementation became compliant with a given version of .NET Standard. For example, according to this table, .NET Core 3.0 was the first version of .NET Core that adhered to .NET Standard 2.1. This means that any version of .NET Core bigger than 3.0 (e.g. .NET Core 3.1) also adheres to .NET Standard 2.1. == Web frameworks == === ASP.NET === First released in 2002, ASP.NET is an open-source server-side web application framework designed for web development to produce dynamic web pages. It is the successor to Microsoft's Active Server Pages (ASP) technology, built on the Common Language Runtime (CLR). === ASP.NET Core === ASP.NET was completely rewritten in 2016 as a modular web framework, together with other frameworks like Entity Framework. The re-written framework uses the new open-source .NET Compiler Platform (also known by its codename "Roslyn") and is cross platform. The programming models ASP.NET MVC, ASP.NET Web API, and ASP.NET Web Pages (a model using only Razor pages) were merged into a unified MVC 6. === Blazor === Blazor is a free and open-source web framework that enables developers to create Single-page Web apps using C# and HTML in ASP.NET Razor pages ("components"). Blazor is part of the ASP.NET Core framework. Blazor Server apps are hosted on a web server, while Blazor WebAssembly apps are downloaded to the client's web browser before running. In addition, a Blazor Hybrid framework is available with server-based and client-based application components. == Numerical libraries == === Open-source numerical libraries === ==== AForge.NET ==== This is a computer vision and artificial intelligence library. It implements a number of genetic, fuzzy logic and machine learning algorithms with several architectures of artificial neural networks with corresponding training algorithms. ==== ALGLIB ==== This is a cross-platform open source numerical analysis and data processing library. It consists of algorithm collections written in different programming languages (C++, C#, FreePascal, Delphi, VBA) and has dual licensing – commercial and GPL. ==== Math.NET Numerics ==== This library aims to provide methods and algorithms for numerical computations in science, engineering and everyday use. Covered topics include special functions, linear algebra, probability models, random numbers, interpolation, integral transforms and more. MIT/X11 license. ==== Meta.Numerics ==== This is a library for advanced scientific computation in the .NET Framework. ==== ML.NET ==== This is a free software machine learning library. The preview release of ML.NET included transforms for feature engineering like n-gram creation, and learners to handle binary classification, multi-class classification, and regression tasks. Additional ML tasks like anomaly detection and recommendation systems have since been added, and other approaches like deep learning will be included in future versions. === Proprietary numerical libraries === ==== ILNumerics.Net ==== This is a high performance, typesafe numerical array set of classes and functions for general math, FFT and linear algebra. The library, developed for .NET/Mono, aims to provide 32- and 64-bit script-like syntax in C#, 2D & 3D plot controls, and efficient memory management. It is released under GPLv3 or commercial license. ==== Measurement Studio ==== This is an integrated suite of UI controls and class libraries for use in developing test and measurement applications. The analysis class libraries provide various digital signal processing, signal filtering, signal generation, peak detection, and other general mathematical functionality. ==== NMath ==== This is a numerical component library for the .NET platform developed by CenterSpace Software. It includes signal processing (FFT) classes, a linear algebra (LAPACK & BLAS) framework, and a statistics package. == 3D graphics == === Open-source 3D graphics === ==== Open Toolkit (OpenTK) ==== This is a low-level C# binding for OpenGL, OpenGL ES and OpenAL. It runs on Windows, Linux, Mac OS X, BSD, Android and iOS. It can be used standalone or integrated into a GUI. ==== Windows Presentation Foundation (WPF) ==== This is a graphical subsystem for rendering user interfaces, developed by Microsoft. It also contains a 3D rendering engine. In addition, interactive 2D content can be overlaid on 3D surfaces natively. It only runs on Windows operating systems. === Proprietary 3D graphics === ==== Unity ==== This is a cross-platform game engine developed by Unity Technologies and used to develop video games for PC, consoles, mobile devices and websites. == Image processing == === AForge.NET === This is a computer vision and artificial intelligence library. It implements a number of image processing algorithms and filters. It is released under the LGPLv3 and partly GPLv3 license. Majority of the library is written in C# and th

  Read more →