AI Assistant Esri

AI Assistant Esri — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Pixel shift

Pixel shift is a method in digital cameras for producing a super-resolution image. The method works by taking several images, after each such capture moving ("shifting") the sensor to a new position. In digital colour cameras that employ pixel shift, this avoids a major limitation inherent in using Bayer pattern for obtaining colour, and instead produces an image with increased colour resolution and, assuming a static subject or additional computational steps, an image free of colour moiré. Taking this idea further, sub-pixel shifting may increase the resolution of the final image beyond that suggested by the specified resolution of the image sensor. Additionally, assuming that the various individual captures are taken at the same sensitivity, the final combined image will have less image noise than a single capture. This can be thought of as an averaging effect (for instance, in a pixel shift image composed of four individual frames with a classic Bayer pattern, every pixel in the final colour image is based on two measurements of the green channel). == List of cameras implementing pixel shift == All of the following cameras are fabricated with one imaging sensor, thus any kind of pixel shift requires a movement of the whole sensor. === Canon === Canon R5: Contains a 45 Mpixel sensor. The High-Resolution Mode shifts the sensor by one pixel to obtain a sequence of nine images that are merged into a 400 Mpixel image. === Fujifilm === Fujifilm GFX50S II: contains a 51 Mpixel sensor. The Pixel Shift Multi-Shot mode shifts the imaging sensor by 0.5-pixel movements to obtain a sequence of 16 images that are subsequently merged into a 200 Mpixel image. Fujifilm GFX100, Fujifilm GFX100 II: contains a 102 Mpixel sensor. A sequence of 16 pixel shifted images are merged into a 400 Mpixel image. Fujifilm GFX100S, Fujifilm GFX100S II: contains a 102 Mpixel sensor. A sequence of 16 pixel shifted images are merged into a 400 Mpixel image Fujifilm GFX100IR: contains a 102 Mpixel sensor. A sequence of 16 pixel shifted images are merged into a 400 Mpixel image Fujifilm X-H2: contains a 40 Mpixel sensor. A sequence of 20 shifted images are merged into a 160 Mpixel image. Fujifilm X-T5: contains a 40 Mpixel sensor. A sequence of 20 shifted images are merged into a 160 Mpixel image. === Nikon === Nikon Z8: contains a 47.5 Mpixel sensor. The High Res shot mode shifts the imaging sensor by 0.5-pixel movements to obtain a sequence of up to 32 images that can be merged in Nikon's NX studio software. Nikon Zf: contains a 24 Mpixel sensor. The High Res shot mode shifts the imaging sensor by 0.5-pixel movements to obtain a sequence of up to 32 images that can be merged in Nikon's NX studio software. === Olympus === Olympus OM-D E-M1 Mark II: contains a 20.4 Mpixel sensor. The High Res shot mode produces a 50 Mpixel image. Olympus OM-D E-M5 Mark II: contains a 16 Mpixel sensor. The High Res shot mode shifts the imaging sensor by 0.5-pixel movements to obtain a sequence of 8 images that are subsequently merged into a 40 Mpixel image. Olympus OM-D E-M5 Mark III: contains a 20.4 Mpixel sensor. The High Res shot mode shifts the imaging sensor by 0.5-pixel movements to obtain a sequence of 8 images that are subsequently merged into a 50 Mpixel image. Olympus OM-D E-M1X: contains a 20.4 Mpixel sensor. The camera sports two pixel shift mode: (a) the 80Mp Tripod mode produces an 80 Mpixel image, (b) the Handheld High Res shot mode produces a 50 Mpixel image. Olympus PEN-F: contains a 20.4 Mpixel sensor. The High Res Shot mode takes multiple images, continually shifting the position of the sensor in sub-pixel increments. Combining these images results in either a 50MP JPEG or an 80MP Raw file. ==== OM System ==== OM System OM-1: contains a 20MPix sensor. The High Res Shot mode takes multiple images, and it can be used handheld or on a tripod. Handheld it will internally produce 50 Mpix files and 80 Mpix when mounted on a tripod. OM System OM-5: contains a 20MPix sensor. The High Res Shot mode takes multiple images, and it can be used handheld or on a tripod. Handheld it will internally produce 50 Mpix files and 80 Mpix when mounted on a tripod. === Panasonic === Panasonic Lumix DC-G9: contains a 20.3 Mpixel sensor. The High Resolution Mode takes a sequence of 8 shots in quick succession between which the sensor is shifted by 0.5 pixel for each image. These are subsequently merged into an 80 Mpixel image. Panasonic Lumix DC-S1: contains a 24.2 Mpixel sensor. The High Resolution Mode takes a sequence of shots in quick succession between which the sensor is shifted by a small amount. These are subsequently merged into a 96 Mpixel image. Panasonic Lumix DC-S1R: contains a 47.3 Mpixel sensor. The High Resolution Mode shifts the imaging sensor by a small increments to obtain a sequence of 8 images that are subsequently merged into a 187 Mpixel image. Panasonic Lumix DC-S1H Panasonic Lumix DC-S5 === Pentax === Pentax K-70: contains a 24.3 Mpixel sensor. The pixel shift mode takes a sequence of 4 shots between which the sensor is shifted by 1 pixel. These are subsequently merged into an image sporting 'all color data in each pixel to deliver super-high-resolution images'. Pentax KP: contains a 24.3 Mpixel sensor. The pixel shift mode takes a sequence of 4 shots between which the sensor is shifted by 1 pixel. These are subsequently merged into an image sporting 'high-resolution images with more accurate colours and much finer details'. Pentax K-3 II: contains a 24.3 Mpixel sensor. The pixel shift mode takes a sequence of 4 shots between which the sensor is shifted by 1 pixel. These are subsequently merged into an image sporting 'super-high-resolution images with far more truthful color reproduction and much finer details'. Pentax K-3 III: contains a 25.7 Mpixel sensor. The pixel shift mode takes a sequence of 4 shots between which the sensor is shifted by 1 pixel. These are subsequently merged into an image sporting 'a cancelling out of the Bayer pattern and removal of the need for sharpness-sapping demosaicing'. Pentax K-1: contains a 36.4 Mpixel sensor. The pixel shift mode takes a sequence of 4 shots between which the sensor is shifted by 1 pixel. These are subsequently merged into an image sporting 'improved detail and colour resolution'. Pentax K-1 II: contains a 36.4 Mpixel sensor. The camera sports two pixel shift mode: (a) a series of 4 tripod-stabilised images shifted by 1 pixel each are subsequently combined into a 47.3 Mpixel image, (b) a series of images taken in handheld mode are combined into a 47.3 Mpixel image that is, within limits, able to cope even with moving subjects. === Sony === Sony a6600: contains a 24.3 Mpixel sensor. The pixel shift mode takes a sequence of 4 shots between which the sensor is shifted by 1 pixel. These are subsequently merged into an image sporting 'all color data in each pixel to deliver super-high-resolution images'. Sony α7R III: contains a 42.4 Mpixel sensor. The pixel shift mode takes a sequence of 4 shots between which the sensor is shifted by 1 pixel. These are subsequently merged into a 42.4 Mpixel image with improved tonal resolution. Sony α7R IV: contains a 61 Mpixel sensor. The camera has two pixel shift modes, (a) the first takes a sequence of 4 shots between which the sensor is shifted by 1 pixel. These are subsequently merged into a 61 Mpixel image with improved tonal resolution, (b) the other takes a sequence of 16 shots between which the sensor is shifted by 0.5 pixel. These are subsequently merged into a 240 Mpixel image with both enhanced detail and improved tonal resolution. Sony α1: contains a 50 Mpixel sensor. The camera has two pixel shift modes, (a) the first takes a sequence of 4 shots between which the sensor is shifted by 1 pixel. These are subsequently merged into a 50 Mpixel image with improved tonal resolution, (b) the other takes a sequence of 16 shots between which the sensor is shifted by 0.5 pixel. These are subsequently merged into a 200 Mpixel image with both enhanced detail and improved tonal resolution. === Hasselblad === Hasselblad H3DII: the model H3DII-39 sports a 39 Mpixel sensor, the model H3DII-50 a 50 Mpixel sensor. Both enable a pixel shift mode which takes a sequence of 4 shots between which the sensor is shifted by 1 pixel. These are subsequently merged into a single image. Hasselblad H4D series: the model H4D-200MS contains a 50 Mpixel sensor. The sensor sports 3 different pixel shift modes which take (a) a sequence of 6 shots taken at slight offsets, (b) a sequence of 4 shots between which the sensor is shifted by 1 pixel, (c) a sequence of 4 shots between which the sensor is shifted by 0.5 pixels. Images obtained by all three modes are subsequently merged into 200 Mpixel images. Hasselblad H5D series: both models H5D-50c MS and H5D-200c MS contain a 50 Mpixel sensor. This sensor sports 2 different pixel shift modes which take (a) a sequence of 6 shots with full and half pixel moveme
Read more →
Virtual assistant

A virtual assistant (VA) is a software agent that can perform a range of tasks or services for a user based on user input, such as commands or questions, including verbal ones. Such technologies often incorporate chatbot capabilities to streamline task execution. The interaction may be via text, graphical interface, or voice, as some virtual assistants are able to interpret human speech and respond via synthesized voices. In many cases, users can ask their virtual assistants questions, control home automation devices and media playback, and manage other basic tasks such as email, to-do lists, and calendars – all with verbal commands. In recent years, prominent virtual assistants for direct consumer use have included Apple Siri, Amazon Alexa, Google Assistant (Gemini), Microsoft Copilot and Samsung Bixby. Also, companies in various industries often incorporate some kind of virtual assistant technology into their customer service or support. Into the 2020s, the emergence of artificial intelligence based chatbots, such as ChatGPT, has brought increased capability and interest to the field of virtual assistant products and services. == History == === Experimental decades: 1910s–1980s === Radio Rex was the first voice-activated toy, patented in 1916 and released in 1922. It was a wooden toy in the shape of a dog that would come out of its house when its name is called. In 1952, Bell Labs presented "Audrey", the Automatic Digit Recognition machine. It occupied a six-foot-high relay rack, consumed substantial power, had streams of cables and exhibited the myriad maintenance problems associated with complex vacuum-tube circuitry. It could recognize the fundamental units of speech, phonemes. It was limited to the accurate recognition of digits spoken by designated talkers. It could therefore be used for voice dialing, but in most cases, push-button dialing was cheaper and faster, rather than speaking the consecutive digits. Another early tool which was enabled to perform digital speech recognition was the IBM Shoebox voice-activated calculator, presented to the general public during the 1962 Seattle World's Fair after its initial market launch in 1961. This early computer, developed almost 20 years before the introduction of the first IBM Personal Computer in 1981, was able to recognize 16 spoken words and the digits 0 to 9. The first natural language processing computer program or the chatbot ELIZA was developed by MIT professor Joseph Weizenbaum in the 1960s. It was created to "demonstrate that the communication between man and machine was superficial". ELIZA used pattern matching and substitution methodology into scripted responses to simulate conversation, which gave an illusion of understanding on the part of the program. Weizenbaum's own secretary reportedly asked Weizenbaum to leave the room so that she and ELIZA could have a real conversation. Weizenbaum was surprised by this, later writing: "I had not realized ... that extremely short exposures to a relatively simple computer program could induce powerful delusional thinking in quite normal people. This gave name to the ELIZA effect, the tendency to unconsciously assume computer behaviors are analogous to human behaviors; that is, anthropomorphisation, a phenomenon present in human interactions with virtual assistants. The next milestone in the development of voice recognition technology was achieved in the 1970s at the Carnegie Mellon University in Pittsburgh, Pennsylvania with substantial support of the United States Department of Defense and its DARPA agency, funded five years of a Speech Understanding Research program, aiming to reach a minimum vocabulary of 1,000 words. Companies and academia including IBM, Carnegie Mellon University (CMU) and Stanford Research Institute took part in the program. The result was "Harpy", it mastered about 1000 words, the vocabulary of a three-year-old and it could understand sentences. It could process speech that followed pre-programmed vocabulary, pronunciation, and grammar structures to determine which sequences of words made sense together, and thus reducing speech recognition errors. In 1986, Tangora was an upgrade of the Shoebox, it was a voice recognizing typewriter. Named after the world's fastest typist at the time, it had a vocabulary of 20,000 words and used prediction to decide the most likely result based on what was said in the past. IBM's approach was based on a hidden Markov model, which adds statistics to digital signal processing techniques. The method makes it possible to predict the most likely phonemes to follow a given phoneme. Still each speaker had to individually train the typewriter to recognize their voice, and pause between each word. In 1983, Gus Searcy invented the "Butler in a Box", an electronic voice home controller system. === Birth of smart virtual assistants: 1990s–2010s === In the 1990s, digital speech recognition technology became a feature of the personal computer with IBM, Philips and Lernout & Hauspie fighting for customers. Much later the market launch of the first smartphone IBM Simon in 1994 laid the foundation for smart virtual assistants as we know them today. In 1997, Dragon's NaturallySpeaking software could recognize and transcribe natural human speech without pauses between each word into a document at a rate of 100 words per minute. A version of Naturally Speaking is still available for download and it is still used today, for instance, by many doctors in the US and the UK to document their medical records. In 2001 Colloquis publicly launched SmarterChild, on platforms like AIM and MSN Messenger. While entirely text-based SmarterChild was able to play games, check the weather, look up facts, and converse with users to an extent. The first modern digital virtual assistant installed on a smartphone was Siri, which was introduced as a feature of the iPhone 4S on 4 October 2011. Apple Inc. developed Siri following the 2010 acquisition of Siri Inc., a spin-off of SRI International, which is a research institute financed by DARPA and the United States Department of Defense. Its aim was to aid in tasks such as sending a text message, making phone calls, checking the weather or setting up an alarm. Over time, it has developed to provide restaurant recommendations, search the internet, and provide driving directions. In November 2014, Amazon announced Alexa alongside the Echo. In 2016, Salesforce debuted Einstein, developed from a set of technologies underlying the Salesforce platform. Einstein was replaced by Agentforce, an agentic AI, in September 2024. In April 2017 Amazon released a service for building conversational interfaces for any type of virtual assistant or interface. === Large Language Models: 2020s-present === In the 2020s, artificial intelligence (AI) systems like ChatGPT have gained popularity for their ability to generate human-like responses to text-based conversations. In February 2020, Microsoft introduced its Turing Natural Language Generation (T-NLG), which was then the "largest language model ever published at 17 billion parameters." On November 30, 2022, ChatGPT was launched as a prototype and quickly garnered attention for its detailed responses and articulate answers across many domains of knowledge. The advent of ChatGPT and its introduction to the wider public increased interest and competition in the space. In February 2023, Google began introducing an experimental service called "Bard" which is based on its LaMDA program to generate text responses to questions asked based on information gathered from the web. While ChatGPT and other generalized chatbots based on the latest generative AI are capable of performing various tasks associated with virtual assistants, there are also more specialized forms of such technology that are designed to target more specific situations or needs. == Method of interaction == Virtual assistants work via: Text, including: online chat (especially in an instant messaging application or other application ), SMS text, e-mail or other text-based communication channel, for example Conversica's intelligent virtual assistants for business. Voice: for example with Amazon Alexa on Amazon Echo devices, Siri on an iPhone, Google Assistant on Google-enabled Android devices, or Bixby on Samsung devices. Images: some assistants, such as Google Assistant (which includes Google Lens) and Bixby on the Samsung Galaxy series, have the added capability of performing image processing to recognize objects in images. Many virtual assistants are accessible via multiple methods, offering versatility in how users can interact with them, whether through chat, voice commands, or other integrated technologies. Virtual assistants use natural language processing (NLP) to match user text or voice input to executable commands. Some continually learn using artificial intelligence techniques including machine learning and ambient intelligence. To activate a virtual assistant u
Read more →
Elastix (image registration)

Elastix is an image registration toolbox built upon the Insight Segmentation and Registration Toolkit (ITK). It is entirely open-source and provides a wide range of algorithms employed in image registration problems. Its components are designed to be modular to ease a fast and reliable creation of various registration pipelines tailored for case-specific applications. It was first developed by Stefan Klein and Marius Staring under the supervision of Josien P.W. Pluim at Image Sciences Institute (ISI). Its first version was command-line based, allowing the final user to employ scripts to automatically process big data-sets and deploy multiple registration pipelines with few lines of code. Nowadays, to further widen its audience, a version called SimpleElastix is also available, developed by Kasper Marstal, which allows the integration of elastix with high level languages, such as Python, Java, and R. == Image registration fundamentals == Image registration is a well-known technique in digital image processing that searches for the geometric transformation that, applied to a moving image, obtains a one-to-one map with a target image. Generally, the images acquired from different sensors (multimodal), time instants (multitemporal), and points of view (multiview) should be correctly aligned to proceed with further processing and feature extraction. Even though there are a plethora of different approaches to image registration, the majority is composed of the same macro building blocks, namely the transformation, the interpolator, the metric, and the optimizer. Registering two or more images can be framed as an optimization problem that requires multiple iterations to converge to the best solution. Starting from an initial transformation computed from the image moments the optimization process searches for the best transformation parameters based on the value of the selected similarity metric. The figure on the right shows the high-level representation of the registration of two images, where the reference remains constant during the entire process, while the moving one will be transformed according to the transformation parameters. In other words, the registration ends when the similarity metric, which is a mathematical function with a certain number of parameters to be optimized, reaches the optimal value which is highly dependent on the specific application. == Main building blocks == Following the structure of the image registration workflow, the elastix toolbox proposes a modular solution that implements for each of the building blocks different algorithms, highly employed in medical image registration, and helps the final users to build their specific pipeline by selecting the most suitable algorithm for each of the main building blocks. Each block is easily configurable both by selecting pre-defined initialization values or by trying multiple sets of parameters and then choosing the most performing one. The registration is performed on images, and the elastix toolbox supports all the data formats supported by ITK, ranging from JPEG and PNG to medical standard formats such as DICOM and NIFTI. It also stores physical pixel spacing, the origin and the relative position to an external world reference system, when provided in the metadata, to facilitate the registration process, especially in medical field applications. === Transformation === The transformation is an essential building block, since it defines the allowable transformations. In image registration, the main distinction can be done between parallel-to-parallel and parallel-to-non parallel (deformable) line mapping transformations. In the elastix toolbox, the final users can select one transformation or compose more transformations either through addition or via composition. Below are reported the different transformation models in order of increasing flexibility, along with the corresponding elastix class names between brackets. Translation (TranslationTransform) allows only translations Rigid (EulerTransform) expands the translation adding rotations and the object is seen as a rigid body Similarity (SimilarityTransform) expands the rigid transformation by introducing isotropic scaling Affine (AffineTransform) expands the rigid transformation allowing both scaling and shear B-splines (BSplineTransform) is a deformable transformation usually preceded by a rigid or affine one Thin-plate splines (SplineKernelTransform) is a deformable transformation belonging to the class of kernel-based transformations that is a composition of and affine and a non-rigid part === Metric === The similarity metric is the mathematical function whose parameters should be optimized to reach the desired registration, and, during the process, it is computed multiple times. Below are reported the available metrics computed employing the reference and the transformed images and the corresponding elastix class names between brackets. Mean squared difference (AdvancedMeanSquares) to be used for mono-modal applications Normalized correlation coefficient (AdvancedNormalizedCorrelation) to be used for images that have an intensity linear relationship Mutual information (AdvancedMattesMutualInformation) to be used for both mono- and multi-modal applications and optimized to reach better performance compared to the normalized version Normalized mutual information (NormalizedMutualInformation) for both mono- and multi-modal applications Kappa statistic (AdvancedKappaStatistic) to be used only for binary images === Sampler === For the computation of the similarity metrics, it is not always necessary to consider all the voxels and, sometimes, it can be useful to use only a fraction of the voxels of the images, i.e. to reduce the execution time for big input images. Below are reported the available criteria for selecting a fraction of the voxels for the similarity metric computation and the corresponding elastix class names between brackets. Full (Full) to employ all the voxels Grid (Grid) to employ a regular grid defined by the user to downsample the image Random (Random) to randomly select a percentage of voxels defined by the users (all voxels have equal probability to be selected) Random coordinate (RandomCoordinate) like the random criterion, but in this case also off-grid positions can be selected to simplify the optimization process === Interpolator === After the application of the transformation, it may occur that the voxels used for the similarity metric computation are at non-voxel positions, so intensity interpolation should be performed to ensure the correctness of the computed values. Below are reported the implemented interpolators and the corresponding elastix class names between brackets. Nearest neighbor (NearestNeighborInterpolator) exploits little resources, but gives low quality results Linear (LinearInterpolator) is sufficient in general applications N-th order B-spline (BSplineInterpolator) can be used to increase the order N, increasing quality and computation time. N=0 and N=1 indicate the nearest neighbor and linear cases respectively. === Optimizer === The optimizer defines the strategy employed for searching the best transformation parameter to reach the correct registration, and it is commonly an iterative strategy. Below are reported some of the implemented optimization strategies. Gradient descent Robbins-Monro, similar to the gradient descent, but employing an approximation of the cost function derivatives A wider range of optimizers is also available, such as Quasi-Newton or evolutionary strategies. === Other features === The elastix software also offers other features that can be employed to speed up the registration procedure and to provide more advanced algorithms to the end-users. Some examples are the introduction of blur and Gaussian pyramid to reduce data complexity, and multi-image and multi-metric framework to deal with more complex applications. == Applications == Elastix has applications mainly in the medical field, where image registration is fundamental to get comprehensive information regarding the analysed anatomical region. It is widely employed in image-guided surgery, tumour monitoring, and treatment assessment. For example, in radiotherapy planning, image registration allows to correctly deliver the treatment and evaluate the obtained results. Thanks to the wide range of implemented algorithms, the use of the elastix software allows physicians and researchers to test different registration pipelines from the simplest to more complex ones, and to save the best one as a configuration file. This file and the fact that the software is completely open-source makes it easy to reproduce the work, that can help supporting the open science paradigm, and allows fast reuse on different patients data. In image-guided surgery, registration time and accuracy are critical points, considering that, during the registration, the patient is on the operating table, and the imag
Read more →
Calais (Reuters product)

Calais is a service created by Thomson Reuters that automatically extracts semantic information from web pages in a format that can be used on the semantic web. Calais was launched in January 2008, and is free to use. The technology is now available via the website of Refinitiv, a provider of financial market data and infrastructure founded in 2018, that is a subsidiary of London Stock Exchange Group. The Calais Web service reads unstructured text and returns Resource Description Framework formatted results identifying entities, facts and events within the text. The service appears to be based on technology acquired when Reuters purchased ClearForest in 2007. The technology has also been used to automatically tag blog articles, and organize museum collections. Calais uses natural language processing technologies delivered via a web service interface.
Read more →
C3D Toolkit

C3D Toolkit is a proprietary cross-platform geometric modeling kit software developed by Russian C3D Labs (previously part of ASCON Group). It's written in C++ . It can be licensed by other companies for use in their 3D computer graphics software products. The most widely known software in which C3D Toolkit is typically used are computer aided design (CAD), computer-aided manufacturing (CAM), and computer-aided engineering (CAE) systems. C3D Toolkit provides routines for 3D modeling, 3D constraint solving, polygonal mesh-to-B-rep conversion, 3D visualization, and 3D file conversions etc. == History == Nikolai Golovanov is a graduate of the Mechanical Engineering department of Bauman Moscow State Technical University as a designer of space launch vehicles. Upon his graduation, he began with the Kolomna Engineering Design bureau, which at the time employed the future founders of ASCON, Alexander Golikov and Tatiana Yankina. While at the bureau, Dr Golovanov developed software for analyzing the strength and stability of shell structures. In 1989, Alexander Golikov and Tatiana Yankina left Kolomna to start up ASCON as a private company. Although they began with just an electronic drawing board, even then they were already conceiving the idea of three-dimensional parametric modeling. This radical concept eventually changed flat drawings into three-dimensional models. The ASCON founders shared their ideas with Nikolai Golovanov, and in 1996 he moved to take up his current position with ASCON. As of 2012 he was involved in developing algorithms for C3D Toolkit. In 2012 the earliest version of the C3D Modeller kernel was extracted from KOMPAS-3D CAD. It was later adopted to a range of different platforms and advertised as a separate product. == Overview == It incorporates five modules: C3D Modeler constructs geometric models, generates flat projections of models, performs triangulations, calculates the inertial characteristics of models, and determines whether collisions occur between the elements of models; C3D Modeler for ODA enables advanced 3D modeling operations through the ODA's standard "OdDb3DSolid" API from the Open Design Alliance; C3D Solver makes connections between the elements of geometric models, and considers the geometric constraints of models being edited; C3D B-Shaper converts polygonal models to boundary representation (B-rep) bodies; C3D Vision controls the quality of rendering for 3D models using mathematical apparatus and software, and the workstation hardware; C3D Converter reads and writes geometric models in a variety of standard exchange formats. == Features == == Development == == Applications == Since 2013 - the date the company started issuing a license for the toolkit -, several companies have adopted C3D software components for their products, users include: Recently, C3D Modeler has been adapted to ODA Platform. In April 2017, C3D Viewer was launched for end users. The application allows to read 3D models in common formats and write it to the C3D file format. Free version is available.
Read more →
Elastix (image registration)

Elastix is an image registration toolbox built upon the Insight Segmentation and Registration Toolkit (ITK). It is entirely open-source and provides a wide range of algorithms employed in image registration problems. Its components are designed to be modular to ease a fast and reliable creation of various registration pipelines tailored for case-specific applications. It was first developed by Stefan Klein and Marius Staring under the supervision of Josien P.W. Pluim at Image Sciences Institute (ISI). Its first version was command-line based, allowing the final user to employ scripts to automatically process big data-sets and deploy multiple registration pipelines with few lines of code. Nowadays, to further widen its audience, a version called SimpleElastix is also available, developed by Kasper Marstal, which allows the integration of elastix with high level languages, such as Python, Java, and R. == Image registration fundamentals == Image registration is a well-known technique in digital image processing that searches for the geometric transformation that, applied to a moving image, obtains a one-to-one map with a target image. Generally, the images acquired from different sensors (multimodal), time instants (multitemporal), and points of view (multiview) should be correctly aligned to proceed with further processing and feature extraction. Even though there are a plethora of different approaches to image registration, the majority is composed of the same macro building blocks, namely the transformation, the interpolator, the metric, and the optimizer. Registering two or more images can be framed as an optimization problem that requires multiple iterations to converge to the best solution. Starting from an initial transformation computed from the image moments the optimization process searches for the best transformation parameters based on the value of the selected similarity metric. The figure on the right shows the high-level representation of the registration of two images, where the reference remains constant during the entire process, while the moving one will be transformed according to the transformation parameters. In other words, the registration ends when the similarity metric, which is a mathematical function with a certain number of parameters to be optimized, reaches the optimal value which is highly dependent on the specific application. == Main building blocks == Following the structure of the image registration workflow, the elastix toolbox proposes a modular solution that implements for each of the building blocks different algorithms, highly employed in medical image registration, and helps the final users to build their specific pipeline by selecting the most suitable algorithm for each of the main building blocks. Each block is easily configurable both by selecting pre-defined initialization values or by trying multiple sets of parameters and then choosing the most performing one. The registration is performed on images, and the elastix toolbox supports all the data formats supported by ITK, ranging from JPEG and PNG to medical standard formats such as DICOM and NIFTI. It also stores physical pixel spacing, the origin and the relative position to an external world reference system, when provided in the metadata, to facilitate the registration process, especially in medical field applications. === Transformation === The transformation is an essential building block, since it defines the allowable transformations. In image registration, the main distinction can be done between parallel-to-parallel and parallel-to-non parallel (deformable) line mapping transformations. In the elastix toolbox, the final users can select one transformation or compose more transformations either through addition or via composition. Below are reported the different transformation models in order of increasing flexibility, along with the corresponding elastix class names between brackets. Translation (TranslationTransform) allows only translations Rigid (EulerTransform) expands the translation adding rotations and the object is seen as a rigid body Similarity (SimilarityTransform) expands the rigid transformation by introducing isotropic scaling Affine (AffineTransform) expands the rigid transformation allowing both scaling and shear B-splines (BSplineTransform) is a deformable transformation usually preceded by a rigid or affine one Thin-plate splines (SplineKernelTransform) is a deformable transformation belonging to the class of kernel-based transformations that is a composition of and affine and a non-rigid part === Metric === The similarity metric is the mathematical function whose parameters should be optimized to reach the desired registration, and, during the process, it is computed multiple times. Below are reported the available metrics computed employing the reference and the transformed images and the corresponding elastix class names between brackets. Mean squared difference (AdvancedMeanSquares) to be used for mono-modal applications Normalized correlation coefficient (AdvancedNormalizedCorrelation) to be used for images that have an intensity linear relationship Mutual information (AdvancedMattesMutualInformation) to be used for both mono- and multi-modal applications and optimized to reach better performance compared to the normalized version Normalized mutual information (NormalizedMutualInformation) for both mono- and multi-modal applications Kappa statistic (AdvancedKappaStatistic) to be used only for binary images === Sampler === For the computation of the similarity metrics, it is not always necessary to consider all the voxels and, sometimes, it can be useful to use only a fraction of the voxels of the images, i.e. to reduce the execution time for big input images. Below are reported the available criteria for selecting a fraction of the voxels for the similarity metric computation and the corresponding elastix class names between brackets. Full (Full) to employ all the voxels Grid (Grid) to employ a regular grid defined by the user to downsample the image Random (Random) to randomly select a percentage of voxels defined by the users (all voxels have equal probability to be selected) Random coordinate (RandomCoordinate) like the random criterion, but in this case also off-grid positions can be selected to simplify the optimization process === Interpolator === After the application of the transformation, it may occur that the voxels used for the similarity metric computation are at non-voxel positions, so intensity interpolation should be performed to ensure the correctness of the computed values. Below are reported the implemented interpolators and the corresponding elastix class names between brackets. Nearest neighbor (NearestNeighborInterpolator) exploits little resources, but gives low quality results Linear (LinearInterpolator) is sufficient in general applications N-th order B-spline (BSplineInterpolator) can be used to increase the order N, increasing quality and computation time. N=0 and N=1 indicate the nearest neighbor and linear cases respectively. === Optimizer === The optimizer defines the strategy employed for searching the best transformation parameter to reach the correct registration, and it is commonly an iterative strategy. Below are reported some of the implemented optimization strategies. Gradient descent Robbins-Monro, similar to the gradient descent, but employing an approximation of the cost function derivatives A wider range of optimizers is also available, such as Quasi-Newton or evolutionary strategies. === Other features === The elastix software also offers other features that can be employed to speed up the registration procedure and to provide more advanced algorithms to the end-users. Some examples are the introduction of blur and Gaussian pyramid to reduce data complexity, and multi-image and multi-metric framework to deal with more complex applications. == Applications == Elastix has applications mainly in the medical field, where image registration is fundamental to get comprehensive information regarding the analysed anatomical region. It is widely employed in image-guided surgery, tumour monitoring, and treatment assessment. For example, in radiotherapy planning, image registration allows to correctly deliver the treatment and evaluate the obtained results. Thanks to the wide range of implemented algorithms, the use of the elastix software allows physicians and researchers to test different registration pipelines from the simplest to more complex ones, and to save the best one as a configuration file. This file and the fact that the software is completely open-source makes it easy to reproduce the work, that can help supporting the open science paradigm, and allows fast reuse on different patients data. In image-guided surgery, registration time and accuracy are critical points, considering that, during the registration, the patient is on the operating table, and the imag
Read more →
Ericom Connect

Ericom Connect is a remote access/application publishing solution produced by Ericom Software that provides secure, centrally managed access to physical or hosted desktops and applications running on Microsoft Windows and Linux systems. == Product overview == Ericom Connect is desktop virtualization and application virtualization software that allows users to run applications remotely, without installing them on the local computer or device. The software is noted for its scalability, ease of deployment, and compatibility with any type of infrastructure, cloud or physical. Ericom Connect uses AccessPad (native client for desktops), AccessToGo (native client for mobile), or AccessNow, one of the first HTML5 RDP solutions to support clientless access to Windows desktops and applications from any device with an HTML5-compatible browser, including Macintosh computers, mobile devices, and Google Chromebooks. Other notable features include performance monitoring, built-in real-time analytics & BI, support for two-factor authentication (using RSA SecurID), multi-tenancy and multi-datacenter support via a single unified web interface, and a “Launch Simulation” feature that allows users to visualize and simulate actual step-by-step user processes directly from within the administration console. In addition to scalability, by distributing configurations, logs, etc., across multiple servers there is no single point of failure, as can be the case if all configuration information is stored on one server. == History == Ericom Connect was introduced in 2015. Ericom Connect is a successor to Ericom PowerTerm Web Connect. PowerTerm Web Connect used an architecture similar to what was then current with Citrix and VMWare, relying on a centralized SQL server, a connection broker, image management for different hypervisors, and a variety of clients. Ericom Connect uses a new grid architecture that provides more scalability, reliability, and flexibility than before.
Read more →
Mark V. Shaney

Mark V. Shaney is a synthetic Usenet user whose postings in the net.singles newsgroups were generated by Markov chain techniques, based on text from other postings. The username is a play on the words "Markov chain". Many readers were fooled into thinking that the quirky, sometimes uncannily topical posts were written by a real person. The system was designed by Rob Pike with coding by Bruce Ellis. Don P. Mitchell wrote the Markov chain code, initially demonstrating it to Pike and Ellis using the Tao Te Ching as a basis. They chose to apply it to the net.singles netnews group. The program is fairly simple. It ingests the sample text (the Tao Te Ching, or the posts of a Usenet group) and creates a massive list of every sequence of three successive words (triplet) which occurs in the text. It then chooses two words at random, and looks for a word which follows those two in one of the triplets in its massive list. If there is more than one, it picks at random (identical triplets count separately, so a sequence which occurs twice is twice as likely to be picked as one which only occurs once). It then adds that word to the generated text. Then, in the same way, it picks a triplet that starts with the second and third words in the generated text, and that gives a fourth word. It adds the fourth word, then repeats with the third and fourth words, and so on. This algorithm is called a third-order Markov chain (because it uses sequences of three words). == Examples == A classic example, from 1984, originally sent as a mail message, later posted to net.singles is reproduced here: >From mvs Fri Nov 16 17:11 EST 1984 remote from alice It looks like Reagan is going to say? Ummm... Oh yes, I was looking for. I'm so glad I remembered it. Yeah, what I have wondered if I had committed a crime. Don't eat with your assessment of Reagon and Mondale. Up your nose with a guy from a firm that specifically researches the teen-age market. As a friend of mine would say, "It really doesn't matter"... It looks like Reagan is holding back the arms of the American eating public have changed dramatically, and it got pretty boring after about 300 games. People, having a much larger number of varieties, and are very different from what one can find in Chinatowns across the country (things like pork buns, steamed dumplings, etc.) They can be cheap, being sold for around 30 to 75 cents apiece (depending on size), are generally not greasy, can be adequately explained by stupidity. Singles have felt insecure since we came down from the Conservative world at large. But Chuqui is the way it happened and the prices are VERY reasonable. Can anyone think of myself as a third sex. Yes, I am expected to have. People often get used to me knowing these things and then a cover is placed over all of them. Along the side of the $$ are spent by (or at least for ) the girls. You can't settle the issue. It seems I've forgotten what it is, but I don't. I know about violence against women, and I really doubt they will ever join together into a large number of jokes. It showed Adam, just after being created. He has a modem and an autodial routine. He calls my number 1440 times a day. So I will conclude by saying that I can well understand that she might soon have the time, it makes sense, again, to get the gist of my argument, I was in that (though it's a Republican administration). _-_-_-_-Mark Other quotations from Mark's Usenet posts are: "I spent an interesting evening recently with a grain of salt." (Alternatively reported as "While at a conference a few weeks back, I spent an interesting evening with a grain of salt.") "I hope that there are sour apples in every bushel." (see also sour grapes) == History == In The Usenet Handbook Mark Harrison writes that after September 1981, students joined Usenet en masse, "creating the USENET we know today: endless dumb questions, endless idiots posing as savants, and (of course) endless victims for practical jokes." In December, Rob Pike created the netnews group net.suicide as prank, "a forum for bad jokes". Some users thought it was a legitimate forum, some discussed "riding motorcycles without helmets". At first, most posters were "real people", but soon "characters" began posting. Pike created a "vicious" character named Bimmler. At its peak, net.suicide had ten frequent posters; nine were "known to be characters." But ultimately, Pike deleted the newsgroup because it was too much work to maintain; Bimmler messages were created "by hand". The "obvious alternative" was software, running on a Bell Labs computer created by Bruce Ellis, based on the Markov code by Don Mitchell, which became the online character Mark V. Shaney. Kernighan and Pike listed Mark V. Shaney in the acknowledgements in The Practice of Programming, noting its roots in Mitchell's markov, which, adapted as shaney, was used for "humorous deconstructionist activities" in the 1980s. Dewdney pointed out "perhaps Mark V. Shaney's magnum opus: a 20-page commentary on the deconstructionist philosophy of Jean Baudrillard" directed by Pike, with assistance from Henry S. Baird and Catherine Richards, to be distributed by email. The piece was based on Jean Baudrillard's "The Precession of Simulacra", published in Simulacra and Simulation (1981). == Reception == The program was discussed by A. K. Dewdney in the Scientific American "Computer Recreations" column in 1989, by Penn Jillette in his PC Computing column in 1991, and in several books, including the Usenet Handbook, Bots: the Origin of New Species, Hippo Eats Dwarf: A Field Guide to Hoaxes and Other B.S., and non-computer-related journals such as Texas Studies in Literature and Language. Dewdney wrote about the program's output, "The overall impression is not unlike what remains in the brain of an inattentive student after a late-night study session. Indeed, after reading the output of Mark V. Shaney, I find ordinary writing almost equally strange and incomprehensible!" He noted the reactions of newsgroup users, who have "shuddered at Mark V. Shaney's reflections, some with rage and others with laughter:" The opinions of the new net.singles correspondent drew mixed reviews. Serious users of the bulletin board's services sensed satire. Outraged, they urged that someone "pull the plug" on Mark V. Shaney's monstrous rantings. Others inquired almost admiringly whether the program was a secret artificial intelligence project that was being tested in a human conversational environment. A few may even have thought that Mark V. Shaney was a real person, a tortured schizophrenic desperately seeking a like-minded companion. Concluding, Dewdney wrote, "If the purpose of computer prose is to fool people into thinking that it was written by a sane person, Mark V. Shaney probably falls short." A 2012 article in Observer compared Mark V. Shaney's "strangely beautiful" postings to the Horse_ebooks account on Twitter and music reviews at Pitchfork, saying that "this mash-up of gibberish and human sentiment" is what "made Mark V. Shaney so endlessly fascinating".
Read more →
RemObjects Software

RemObjects Software is an American software company founded in 2002 by Alessandro Federici and Marc Hoffman. It develops and offers tools and libraries for software developers on a variety of development platforms, including Embarcadero Delphi, Microsoft .NET, Mono, and Apple's Xcode. == History == RemObjects Software was founded in the summer of 2002. Its first product was RemObjects SDK 1.0 for Delphi, the company's remoting solution which is now in its 6th version. In late 2003 RemObjects expanded its product portfolio to add Data Abstract for Delphi, a multi-tier database framework built on top of the SDK. In 2004, Carlo Kok, who would eventually become Chief Compiler Architect for Oxygene, joined the company, adding the open source Pascal Script library for Delphi to the company's portfolio. Initial development began on Oxygene (which was then named Chrome) based on Carlo's experience from writing the widely used Pascal Script scripting engine. Towards the end of 2004, RemObjects SDK for .NET was released, expanding the remoting framework to its second platform. Chrome 1.0 was released in mid-2005, providing support for .NET 1.1 and .NET 2.0, which was still in beta at the time - making Chrome the first shipping language for .NET that supported features such as generics. It was followed by Chrome 1.5 when .NET 2.0 shipped in November of the same year. 2005 also saw the expansion of Data Abstract to .NET as a second platform. Data Abstract for .NET was the first RemObjects product (besides Oxygene itself) to be written in Oxygene. Hydra 3.0, was released for .NET in December 2006, bringing a paradigm shift to the product, away from a regular plugin framework, and focusing on interoperability between plugins and host applications written in either .NET or Delphi/Win32, essentially enabling the use of both managed and unmanaged code in the same project. In Summer 2007, RemObjects released Chrome 'Joyride' which added official support for .NET 3.0 and 3.5. Chrome once again was the first language to ship release level support for new .NET framework features supported by that runtime - most importantly Sequences and Queries (aka LINQ). Development continued and in May 2008 Oxygene 3.0 was released, dropping the "Chrome" moniker. Oxygene once again brought major language enhancements, including extensive support for concurrency and parallel programming as part of the language syntax. In October 2008, RemObjects Software and Embarcadero Technologies announced plans to collaborate and ship future versions of Oxygene under the Delphi Prism moniker, later changed to Embarcadero Prism. The first of these releases of Prism became available in December 2008. Over the course of 2009, RemObjects software completed the expansion of its Data Abstract and RemObjects SDK product combo to a third development platform - Xcode and Cocoa, for both Mac OS X and iPhone SDK client development. RemObjects SDK for OS X shipped in the spring of 2009, followed by Data Abstract for OS X in the fall. In 2011, Oxygene was expanded to add support for the Java platform, in addition to NET. In 2014, RemObjects introduced a C# compiler which runs as a Visual Studio 2013 plugin, that can output code for iOS, MacOS (Cocoa) and Android, in addition to .NET compatible code. In addition, an IDE called Fire was introduced for macOS which works with their C# and Oxygene compilers. Together, the compiler supporting both Oxygene and C# was rebranded as the Elements Compiler, with CE# having the Code name "Hydrogene". In February 2015, RemObjects introduced a beta version of a Swift compiler called Silver as part of its Elements effort. Silver, too, could create code that will execute on Android, the JVM, .NET platform and also create native Cocoa code. Silver added new features to the Swift language, such as exceptions and has a few differences and limitations compared to Apple's Swift. In February 2020, support for the Go programming language was introduced with RemObjects Gold, including the ability to compile Go language code for all Elements platforms, and a port of the extensive Go Base Library available to all Elements languages. In 2021, Mercury was added to the Elements compiler as the sixth language, providing a future for the Visual Basic .NET language recently deprecated by Microsoft. Mercury supports building and maintaining existing VB.NET projects, as well as using the language for new projects both on .NET and the other platforms. == Commercial products == Elements is a development toolchain that targets .NET runtime, Java/Android virtual machines, the Apple ecosystem (macOS, iOS, tvOS), WebAssembly and native and Windows/Linux/Android NDK processor-native machine code in conjunction with a runtime library that does automatic garbage collection on non-ARC environments and ARC on ARC-based environments, such as iOS and MacOS. Because Java, C#, Swift, and Oxygene all can import each other's APIs, Elements effectively functions as Java bonded together with C# bonded together with Swift bonded together with Oxygene as a confederation of languages cooperating together quite intimately. Oxygene, a unique programming language based on Object Pascal, which can import Java, C#, and Swift APIs from the runtime of the target operating system; RemObjects C#, an implementation of C# programming language, which can import Java, Swift, and Oxygene APIs from the runtime of the target operating system and which is intended as a competitor of Xamarin, but Hydrogene's C# targets JVM bytecode instead of Xamarin's C# compiling to only Common Language Infrastructure byte code and needing the accompanying Mono Common Language Runtime to be present in such JVM-centric environments as Android; Silver, a free implementation of the Swift programming language, which can import Java, C#, and Oxygene APIs from the runtime of the target operating system; Iodine, an implementation of the Java programming language. Gold, an implementation of the Go programming language. Mercury, an implementation of the Visual Basic .NET programming language. Fire an integrated development environment for macOS. Water an integrated development environment for Windows. Data Abstract Remoting SDK, a.k.a. RemObjects SDK Hydra Oxfuscator Oxidizer, an automatic translator from Java, C#, Objective-C, and Delphi to Oxygene, from Java, Objective-C, and C# to Swift, and from Java and Objective-C to C#. == Open source projects == Train is an open-source JavaScript-based tool for building and running build scripts and automation. Internet Pack for .NET is a free, open source library for building network clients and servers using TCP and higher level protocols such as HTTP or FTP, using the .NET or Mono platforms. It includes a range of ready to use protocol implementations, as well as base classes that allow the creation of custom implementations. RemObjects Script for .NET is a fully managed ECMAScript implementation for .NET and Mono. Pascal Script for Delphi is a widely used implementation of Pascal as scripting language. == Involvement of other projects == The Oxygene Compiler Oxygene is a language based on Object Pascal and designed to efficiently target the Microsoft .NET and Mono managed runtimes; it expands Object Pascal with a range of additional language features, such as Aspect Oriented Programming, Class Contracts and support for Parallelism. It integrates with the Microsoft Visual Studio and MonoDevelop IDEs.
Read more →
SGT STAR

SGT STAR, also known as Sgt. Star or Sergeant Star, was a chatbot operated by the United States Army to answer questions about recruitment. == Background == After the September 11 attacks, traffic increased significantly to chatrooms on the U.S. Army's website, goarmy.com, increasing costs of staffing the live chatrooms. As a cost-cutting measure, the SGT STAR project was initiated as a partnership between the United States Army Accessions Command and Spectre AI, a wholly owned subsidiary of Next IT. Next IT, a Spokane, Washington-based company deploys "intelligent virtual assistants," using its software dubbed "ActiveAgent" which is a framework for functional presence engines. Testing began in 2003, and SGT STAR launched to the public in 2006. "STAR" is an acronym for "strong, trained and ready." SGT STAR was launched as a chat interface on goarmy.com, but has since been developed as a mobile application, as well as a life-size animated projection that has appeared live at public events. SGT STAR can also interact with users on Facebook. == FOIA request == In 2013, the Electronic Frontier Foundation filed a Freedom of Information Act request to learn more about SGT STAR, including input and output patterns (questions and answers), usage statistics, contracts, and privacy policies. They received these records in April 2014, after coverage from various media outlets and a tongue-in-cheek campaign to "Free Sgt. Star."
Read more →
Google Mobile Services

Google Mobile Services (GMS) is a collection of proprietary applications and application programming interfaces (APIs) services from Google that are typically pre-installed on the majority of Android devices, such as smartphones, tablets, and smart TVs. GMS is not a part of the Android Open Source Project (AOSP), which means an Android manufacturer needs to obtain a license from Google in order to legally pre-install GMS on an Android device. This license is provided by Google without any licensing fees except in the EU. == Core applications == The following are core applications that are part of Google Mobile Services: Google Search Google Chrome YouTube Google Play Google Drive Gmail Google Meet Google Maps Google Photos Google TV YouTube Music === Historically === Google+ Google Hangouts Google Wallet Google Play Magazines Google Play Music Google Play Movies & TV Google Duo == Reception, competitors, and regulators == === FairSearch === Numerous European firms filed a complaint to the European Commission stating that Google had manipulated their power and dominance within the market to push their Services to be used by phone manufacturers. The firms were joined under the name FairSearch, and the main firms included were Microsoft, Expedia, TripAdvisor, Nokia and Oracle. FairSearch's major problem with Google's practices was that they believed Google were forcing phone manufacturers to use their Mobile Services. They claimed Google managed this by asking these manufacturers to sign a contract stating that they must preinstall specific Google Mobile Services, such as Maps, Search and YouTube, in order to get the latest version of Android. Google swiftly responded stating that they "continue to work co-operatively with the European Commission". === Aptoide === The third-party Android app store Aptoide also filed an EU competition complaint against Google once again stating that they are misusing their power within the market. Aptoide alleged that Google was blocking third-party app stores from being on Google Play, as well as blocking Google Chrome from downloading any third-party apps and app stores. As of June 2014, Google had not responded to these allegations. === Abuse of Android dominance === In May 2019, Umar Javeed, Sukarma Thapar, Aaqib Javeed vs. Google LLC & Ors. the Competition Commission of India ordered an antitrust probe against Google for abusing its dominant position with Android to block market rivals. In Prima Facie opinion the commission held that mandatory pre-installation of the entire Google Mobile Services (GMS) suite, under Mobile Application Distribution Agreements (MADA), amounts to the imposition of unfair conditions on the device manufacturers. === EU antitrust ruling === On July 18, 2018, the European Commission fined Google €4.34 billion for breaching EU antitrust rules which resulted in a change of licensing policy for the GMS in the EU. A new paid licensing agreement for smartphones and tablets shipped into the EEA was created. The change is that the GMS is now decoupled from the base Android and will be offered under a separate paid licensing agreement. === Privacy policy === At the same time, Google faced problems with various European data protection agencies, most notably In the United Kingdom and France. The problem they faced was that they had a set of 60 rules merged into one, which allowed Google to "track users more closely". Google once again came out and stated that their new policies still abide by European Union laws. === Android distributions without Google Mobile Services === After surveillance and privacy concerns, several custom android distributions have been implemented, such as GrapheneOS, LineageOS, CalyxOS, iodéOS or /e/OS, and they come either without any GMS installed by default or with microG, that adds a compatibility layer.
Read more →
Semantic space

Semantic spaces in the natural language domain aim to create representations of natural language that are capable of capturing meaning. The original motivation for semantic spaces stems from two core challenges of natural language: Vocabulary mismatch (the fact that the same meaning can be expressed in many ways) and ambiguity of natural language (the fact that the same term can have several meanings). The application of semantic spaces in natural language processing (NLP) aims at overcoming limitations of rule-based or model-based approaches operating on the keyword level. The main drawback with these approaches is their brittleness, and the large manual effort required to create either rule-based NLP systems or training corpora for model learning. Rule-based and machine learning based models are fixed on the keyword level and break down if the vocabulary differs from that defined in the rules or from the training material used for the statistical models. Research in semantic spaces dates back more than 20 years. In 1996, two papers were published that raised a lot of attention around the general idea of creating semantic spaces: latent semantic analysis and Hyperspace Analogue to Language. However, their adoption was limited by the large computational effort required to construct and use those semantic spaces. A breakthrough with regard to the accuracy of modelling associative relations between words (e.g. "spider-web", "lighter-cigarette", as opposed to synonymous relations such as "whale-dolphin", "astronaut-driver") was achieved by explicit semantic analysis (ESA) in 2007. ESA was a novel (non-machine learning) based approach that represented words in the form of vectors with 100,000 dimensions (where each dimension represents an Article in Wikipedia). However practical applications of the approach are limited due to the large number of required dimensions in the vectors. More recently, advances in neural network techniques in combination with other new approaches (tensors) led to a host of new recent developments: Word2vec from Google, GloVe from Stanford University, and fastText from Facebook AI Research (FAIR) labs.
Read more →
YNAB

You Need a Budget (YNAB) (pronounced ) is an online personal budgeting program based on the envelope system developed by a privately owned American company of the same name. It is available via any web browser or a mobile app. == History == The program was initially developed as standalone software in 2004 by Jesse Mecham, while he was in college pursuing his master's degree in accounting, after he and his wife faced financial difficulty and decided to improve their budgeting. It evolved from a spreadsheet that he created for the budgeting process. The acronym stands for "you need a budget." In 2015 they changed their licensing model to software as a service. In 2020, YNAB had 115 employees, all working remotely. == Overview == The service encourages users to follow four principles or "rules": Give every dollar a job: Each dollar in a budget is allocated to a specific purpose. This concept is also called zero-based budgeting. Embrace true expenses: All expenses are planned for, so that there are no surprises. Roll with the punches: Being flexible when there is overspending. Age your money: Keeping money in your budget without immediately spending it. Users can either import transactions automatically from their financial institutions or input them manually. The software also displays financial reports to keep users informed about their finances at a glance. == Awards and recognition == YNAB has been named one of the best budgeting apps by U.S. News & World Report, Kiplinger's Personal Finance, CNN, HuffPost, CNBC, and hundreds of other financial reporting outlets. The Wall Street Journal – Best budgeting app for hands-on budgeters. Forbes – Best Budgeting Apps Money – Best budgeting app for college students. Lifehacker – Most popular personal finance software. Wirecutter – "Great pick for hard-core budgeters". Investopedia – Best overall budgeting app.
Read more →
PropBank

PropBank is a corpus that is annotated with verbal propositions and their arguments—a "proposition bank". Although "PropBank" refers to a specific corpus produced by Martha Palmer et al., the term propbank is also coming to be used as a common noun referring to any corpus that has been annotated with propositions and their arguments. The PropBank project has played a role in research in natural language processing, and has been used in semantic role labelling. == Comparison == PropBank differs from FrameNet, the resource to which it is most frequently compared, in several ways. PropBank is a verb-oriented resource, while FrameNet is centered on the more abstract notion of frames, which generalizes descriptions across similar verbs (e.g. "describe" and "characterize") as well as nouns and other words (e.g. "description"). PropBank does not annotate events or states of affairs described using nouns. PropBank commits to annotating all verbs in a corpus, whereas the FrameNet project chooses sets of example sentences from a large corpus and only in a few cases has annotated longer continuous stretches of text. PropBank-style annotations often remain close to the syntactic level, while FrameNet-style annotations are sometimes more semantically motivated. From the start, PropBank was developed with the idea of serving as training data for machine learning-based semantic role labeling systems in mind. It requires that all arguments to a verb be syntactic constituents and different senses of a word are only distinguished if the differences bear on the arguments. Due to such differences, semantic role labeling with respect to PropBank is often a somewhat easier task than producing FrameNet-style annotations.
Read more →
Verbot

The Verbot (short for Verbal-Robot) was a chatbot program and artificial intelligence software development kit (SDK) designed for Windows and web platforms. == Early beginning == The origin of verbot traces back to Michael Mauldin's research during his time as a graduate student and post-doctoral fellow at Carnegie Mellon University. The creative foundation also stems from Peter Plantec's work in personality psychology and art direction. === Historic outline === In 1994, Michael Loren Mauldin, founder of Lycos, Inc., developed a prototype chatbot, Julia, which competed in the internationally known Turing test, for the coveted Loebner Prize. The Turing test matches computer scientist judges against machines to see if they can distinguish a computer from a real human. Julia was refined and developed, and in 1997, Dr. Mauldin and Peter Plantec, a clinical psychologist and animator, formed Virtual Personalities, Inc. (now Conversive, Inc.) in order to create a virtual human interface that would incorporate real-time animation as well as speech and natural language processing. The initial release, a stand-alone virtual person called Sylvie, was beta-tested to the public. This release was well received, and finally, after several versions, the production release (deemed version 3) of the Verbally Enhanced Software Robot, or Verbot, was deployed in fall 2000. The grandfather of all Verbots is Rog-O-Matic, which, although it could not talk, could and did explore a virtual world. Julia has been active on the internet in one form or another since 1989. A close cousin of Julia is Lycos, a robot that explores the World Wide Web and answers questions about it. Sylvie was the first Verbot with a face and a voice. Sylvie was the first Virtual Human with advanced, flexible interfacing capability. === Beginnings === The Virtual Personalities story goes back to 1978, where Mauldin was attending Rice University. Fascinated by the idea of ELIZA, he proceeded to write a program called "PET" for his 8 kilobyte Commodore PET Computer. PET included simple induction as a way to post new information, for example: Subject: I like my friend (later) Subject: I like food. PET: I have heard that food is your friend. Meanwhile, Plantec was separately designing a personality for "Entity", a theoretical virtual human that would interact comfortably with humans without pretending to be one. At that time the technology was not advanced enough to realize Entity. Mauldin got so involved with this that he majored in Computer Science and minored in Linguistics. === Rogue === In the late seventies and early eighties, a popular computer game at universities was Rogue, an implementation of Dungeons and Dragons where the player would descend 26 levels in a randomly created dungeon, fighting monsters, gathering treasure, and searching for the elusive "Amulet of Yendor". Mauldin was one of four grad students who devoted a large amount of time to building a program called "Rog-O-Matic" capable of retrieving the amulet and emerging victorious from the dungeon. === TinyMUD === In 1989, when James Aspnes at Carnegie Mellon created the first TinyMUD (a descendant of MUD and AberMUD), Mauldin was one of the first to create a computer player that would explore the text-based world of TinyMUD. But his first robot, Gloria, gradually accreted more and more linguistic ability, to the point that it could pass the "unsuspecting" Turing test. In this version of the test, the human has no reason to suspect that one of the other occupants of the room is controlled by a computer, and so is more polite and asks fewer probing questions. The second generation of Mauldin's TinyMUD robots was Julia, created on Jan. 8, 1990. Julia slowly developed into a more and more capable conversational agent, and assumed useful duties in the TinyMUD world, including tour guide, information assistant, note-taker, and message-relayer. She could even play the card game hearts along with the other human players. In 1991, Julia attended the first Loebner Prize contest in Boston, Massachusetts. Although she only finished third, she was ranked by one judge as more human than one of the human confederates, winning a coveted certificate of humanness in the world's first restricted Turing test. Julia continued to log in to various TinyMUD's and TinyMucks for the next seven years, and chatted with hundreds of people a month over the internet. === Lycos === Julia's job was to explore a virtual world consisting of pages of textual descriptions, with links between them, and to construct an internal map of that world and answer questions about it (including path information such as the shortest route from one room to another, and matching information, such as which rooms contained a certain kind of object or textual description). It was therefore only a very short cognitive leap from Julia to Lycos, another robotic agent that explores a virtual world made of hyperlinked pages of text, and which answers questions about those pages. Sylvie was born and her abilities were expanded greatly to include interfacing with computers and control systems via her serial ports. === Sylvie === Sylvie was the first intelligent animated virtual human. She was designed both as a conversation agent and as a virtual human interface that would form a bridge between the two. She became more popular as a conversation agent, but her designers believe she serves as a prototype for future virtual human interface design that will help us all cope with the increasing complexity of technology. As an aside, Plantec noticed that a large number of Sylvies have been sold in Southeast Asia. Upon investigation, he found out that students had discovered a "test" mode that would allow them to type in English sentences that Sylvie would pronounce in her somewhat stylized English. == Ownership == In 1997, Dr. Mauldin and Peter Plantec formed Virtual Personalities, Inc. to create Natural Language Processing solutions for companies. In 2001 Virtual Personalities, Inc. became Conversive, Inc. to reflect the focus on providing Customer Service and Marketing to the Enterprise Market. In late 2012 Avaya, Inc. acquired Conversive's assets including Verbots. == Verbot versions == The Verbot 4 version was created and released in 2004. In 2005 Version 4.1 of the Verbot Software was released with many feature enhancements and bug fixes, including built-in support for embedding C# code in outputs and conditionals. In early 2006 Conversive launched Verbots Online allowing Verbot 4 users to upload their knowledge and show off their bots to the world. In 2009 Version 5 was released, completely free and fully featured. In early 2012 the last version of Verbot, 5.0.1.2, was released to the general public with support for Windows 7. Later in 2012 Verbots Online completely shut down. == Verbots today == Verbots.com, its community of users, and its forums no longer exist, but the software and users can still be found. There has been no active development since the early 2012 release of Verbot 5.0.1.2.
Read more →