AI Assistant In Adobe Acrobat

AI Assistant In Adobe Acrobat — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

WomanStats Project

The WomanStats Project is a donor-funded research and database project housed at Brigham Young University that "seeks to collect detailed statistical data on the status of women around the world, and to connect that data with data on the security of states." The WomanStats Database aims to provide a comprehensive compilation of information on the status of women in the world. Coders comb the extant literature and conduct expert interviews to find qualitative and quantitative information on over 300 indicators of women's status in 174 countries with populations of at least 200,000. Access to the online database is free. == History and structure == WomanStats began as an outgrowth of a paper Dr. Valerie M. Hudson (of the Brigham Young University Political Science department) and one of her graduate students, Andrea den Boer, published in International Security on the association between national security and the abnormal sex ratio in Asia. After the success and influence of their first article, (later added as one of their top twenty national security articles of that journal of all time), Hudson and den Boer did further research on the connection between the status of women and national security, but found that there was no single database that covered the range of topics that they needed for their research. Consequently, they began compiling information on variables regarding the status of women around the world. The database was officially formed in 2001 and grew exponentially as it later added more variables. The Project went live on the Internet in July 2007. The principal investigators are: Valerie M. Hudson (International Relations), Bonnie Ballif-Spanvill (Psychology, emeritus), and Chad F. Emmett (Geography) all from Brigham Young University, Mary Caprioli from the University of Minnesota, Duluth (International Relations), Rose McDermott from Brown University (International Relations), Andrea Den Boer from the University of Kent at Canterbury in the United Kingdom (International Relations) and S. Matthew Stearmer from the Ohio State University (Sociology; doctoral student). Approximately a dozen undergraduate and graduate students at Brigham Young University and Texas A&M University work at any one time as coders for the project. The coders take the raw quantitative and qualitative data collected in government reports, news articles, research papers, etc. and sort the applicable information on women into categories. They may also implement scales developed by the principal investigators, or that they (the students) themselves have developed. == Database == As of February 2011, the database has 307 variables, covers 174 nations with populations over 200,000, uses 18,015 sources and contains over 111,000 individual data points. All data is referenced to original sources. Not every variable has information for each country; similarly, not all countries have information for each variable: overall, about 70% of country-variable combinations have information. These database coding gaps exist where information is not available or is incomplete, or variables are not collected and reported by governments or international organizations. At times, information from different sources may be contradictory, and the WomanStats Database records this discrepant information for triangulation purposes. == Users and role of the database == The database is meant to help fill a hole in the extant data on the situation of women around the world. WomanStats data and research has been vetted and/or used by the United Nations, the United States Department of Defense, the Central Intelligence Agency, and the World Bank. Their data and research were also used by the United States Senate Committee on Foreign Relations in crafting the International Violence Against Women’s Act. The Inter-Agency Network on Women and Gender Equality (IANWGE) of the United Nations has stated that the WomanStats project "filled a major gap in the availability of data on women" (2007). Victor Asal and Mitchell Brown, researchers not affiliated with WomanStats, stated in an article published in Politics and Policy that "one of the most significant challenges of cross-national empirical studies of the prevalence of interpersonal violence is the paucity of available data, particularly reliable data," and that "WomanStats has allowed for an important first glimpse at analyzing the factors related to interpersonal violence." They conclude by stating that "Our findings suggest that, in the same way that larger disciplinary resources have invested in interstate and intrastate war, disciplinary resources need to be expended in creating a data set exploring interpersonal violence. Until the rights and the lives of women and children are taken as seriously as the survival of states by more proactively collaborating on projects like WomanStats, we will continue to only have a small lens through which to understand problems like this." Princeton University professor Evan S. Liberman wrote, "Although data on political regimes and group conflict have been in far greater demand by political scientists than data on gender politics and policies, two gender-related databases provide...examples of innovative HIRDs. Both the Womanstats database project (Hudson et al. 2009) and the Research Network on Gender Politics and the State (RNGS) project (McBride et al. 2008) are well-integrated presentations of quantitative and qualitative data characterizing the quality of gender relations around the world and, in particular, analytic descriptions of the treatment of women."." == Research == The research component of WomanStats focuses on exploring the relationship between the situation of women and the behavior and security of states. Current research initiatives include: Exploring the relationship between violent instability and inequity and family law. Examining the effect of polygyny and marriage market dislocations on the rise of suicide terrorism. Documenting discrepancies between laws on the books and cultural practices on the ground concerning gender issues. Investigating how well the situation of women predicts the peacefulness of nations-states, compared to their variables such as democracy, wealth, and civilization. The Project has published articles in International Security, International Studies Quarterly, Peace and Conflict, Journal of Peace Research, Political Psychology, Cumberland Law Review, and World Political Review, and has a forthcoming book from Columbia University Press.
Read more →
Social knowledge management

Social knowledge management is a business approach that aims to leverage the collective intelligence and social interactions of an organization’s members and stakeholders. It is a branch of knowledge management, which is a multidisciplinary field that deals with the creation, sharing, and use of knowledge in various domains, such as business, economics, psychology, and information management. Knowledge management seeks to enhance organizational performance, innovation, and competitiveness by managing the intangible assets of an organization, such as human capital, know-how, technology, customers, and networks. Social media plays a crucial role in social knowledge management by enhancing communication, collaboration, and learning among individuals and groups, both internally and externally. It offers valuable insights and feedback from customers, partners, and stakeholders, and aids in generating and disseminating new knowledge. In a business context, social media is utilized for various purposes, including sentiment analysis, social learning, social collaboration, and social knowledge management. Social knowledge management is one of the application areas of social media in a business context next to others like sentiment analysis, social learning or social collaboration. Social media use by businesses can strive to achieve the following things from social media strategy point of view: learn, listen, engage in conversation, measure and refine, develop capabilities, define activities, prioritize objectives etc. Social media are not only transforming private communication and interaction, they also will transform how people work. With social media knowledge work in organizations can be optimized extremely: like a better distribution sharing and access to knowledge. This will be more and more important, as in today's business world, speed and complexity increase dramatically, while work environments change constantly. == Examples of Social KM platforms == Elium, a European software application which combines social tagging, bookmarking and networking paradigms to address internal information management purposes. Sciomino was a startup enterprise social network for Social Knowledge Management.
Read more →
NYSERNet

NYSERNet, Inc. (New York State Education and Research Network), is a non-profit Internet service provider in New York State. It mainly provides Internet access to universities, colleges, museums, health care facilities, primary and secondary schools, and research institutions. == History == NYSERNet was founded in 1986 in Troy, New York. Its founders compared NYSERNet's network with the Erie Canal and considered it the next step in two centuries to draw the country together. NYSERNet's network reaches from Buffalo to New York City. Completed in 1987, it was the first statewide regional IP network in the United States.[1] Initial speed of 56 kbps was upgraded to T1 in 1989 and T3 in 1994. It was the original assignee of AS174 according to RFC1117. This ASN is used today by Cogent Communications for their global network.
Read more →
Death of Molly Russell

In November 2017, Molly Russell, a fourteen-year-old British schoolgirl from Harrow, London, was found dead in her bedroom by her parents. In an inquest, the coroner stated that she had died from an act of self-harm following depression and the results of social media consumption, including material on Instagram and Pinterest. She also had a Twitter account in which she documented her growing depression. == Life == Russell had been a pupil at Hatch End High School. At the inquest, the school's head teacher expressed shock that she was able to access distressing online content. Her parents stated that she had never shown any previous signs of struggle and was doing very well in school. It was revealed at the inquest that in the six months prior to her death, 2,100 of 16,300 pieces of content she had interacted with on Instagram were on topics such as self-harm, depression, and suicide. It was also noted that throughout her experience on social media, there were never any warning signs about the information she viewed on these platforms. == Subsequent events == Dr. Navin Venugopal, the child psychiatrist assigned to the case investigating her death, called the material she viewed "disturbing and distressing" and said he was unable to sleep well for weeks after viewing it. The coroner Andrew Walker concluded that Molly's death was "an act of self harm suffering from depression and the negative effects of online content". He issued a prevention of future deaths report regarding her death, in which he made a number of recommendations for operators of online platforms, including: separating platforms for adults and children age verification changes in policy on filtering of age-specific content adding features for parental supervision and control data retention of material viewed by children He suggested that this could be accomplished by either legislation or self-regulation. The lawyer representing her family at the inquest stated that the findings "captured all of the elements of why this material is so harmful." The case has been cited as a motivator for the passage of the Online Safety Act. A charity, the Molly Rose Foundation, was set up in her memory, with the goal of suicide prevention for young people. Meta and Pinterest are believed to have made substantial donations to the charity.
Read more →
Distributed manufacturing

Distributed manufacturing, also known as distributed production, cloud producing, distributed digital manufacturing, and local manufacturing, is a form of decentralized manufacturing practiced by enterprises using a network of geographically dispersed manufacturing facilities that are coordinated using information technology. It can also refer to local manufacture via the historic cottage industry model, or manufacturing that takes place in the homes of consumers. == Enterprise == In enterprise environments, the primary attribute of distributed manufacturing is the ability to create value at geographically dispersed locations. For example, shipping costs could be minimized when products are built geographically close to their intended markets. Also, products manufactured in a number of small facilities distributed over a wide area can be customized with details adapted to individual or regional tastes. Manufacturing components in different physical locations and then managing the supply chain to bring them together for final assembly of a product is also considered a form of distributed manufacturing. Digital networks combined with additive manufacturing allow companies a decentralized and geographically independent distributed production (cloud manufacturing). == Consumer == Within the maker movement and DIY culture, small scale production by consumers often using peer-to-peer resources is being referred to as distributed manufacturing. Consumers download digital designs from an open design repository website like Youmagine or Thingiverse and produce a product for low costs through a distributed network of 3D printing services such as 3D Hubs, Geomiq. In the most distributed form of distributed manufacturing the consumer becomes a prosumer and manufacturers products at home with an open-source 3-D printer such as the RepRap. In 2013 a desktop 3-D printer could be economically justified as a personal product fabricator and the number of free and open hardware designs were growing exponentially. Today there are millions of open hardware product designs at hundreds of repositories and there is some evidence consumers are 3-D printing to save money. For example, 2017 case studies probed the quality of: (1) six common complex toys; (2) Lego blocks; and (3) the customizability of open source board games and found that all filaments analyzed saved the prosumer over 75% of the cost of commercially available true alternative toys and over 90% for recyclebot filament. Overall, these results indicate a single 3D printing repository, MyMiniFactory, is saving consumers well over $60 million/year in offset purchases of only toys. These 3-D printers can now be used to make sophisticated high-value products like scientific instruments. Similarly, a study in 2022 found that 81% of open source designs provided economic savings and the total savings for the 3D printing community is more than $35 million from downloading only the top 100 products at YouMagine. In general, the savings are largest when compared to conventional products when prosumers use recycled materials in 'distributed recycling and additive manufacturing' (DRAM). == Emergency Distributed Manufacturing During COVID-19 Pandemic == Distributed manufacturing became far more visible during the COVID-19 pandemic because it offered a practical response to the breakdown of centralized global supply chains. As lock downs, border restrictions, and factory shutdowns disrupted conventional production, decentralized networks using local facilities such as Open Source Medical Supplies stepped in and manufactured over 48 million products. Additive manufacturing /3D printing were used to produce urgently needed items such as face shields, ventilators and their components, nasopharyngeal swabs, and other personal protective equipment. This demonstrated that distributed manufacturing could reduce lead times, improve responsiveness, and lessen dependence on distant suppliers during crisis conditions for a wide range of products. Peer-reviewed studies on pandemic-era manufacturing note that additive manufacturing was especially valuable because digital design files could be shared rapidly and produced close to the point of need, enabling hospitals, universities, small firms, and maker communities to supplement strained medical supply chains. The pandemic also helped shift distributed manufacturing from being seen as a niche or experimental model to a credible strategy for resilience, flexibility, and emergency response. At the same time, scholars caution that its wider adoption depends on solving issues related to quality assurance, regulation, material consistency, and coordination across distributed production sites. Overall, COVID-19 popularized distributed manufacturing by showing that localized, digitally enabled production could complement traditional manufacturing systems when speed, adaptability, and supply-chain resilience were critical. == Social change == Some call attention to the conjunction of commons-based peer production with distributed manufacturing techniques. The self-reinforced fantasy of a system of eternal growth can be overcome with the development of economies of scope, and here, the civil society can play an important role contributing to the raising of the whole productive structure to a higher plateau of more sustainable and customised productivity. Further, it is true that many issues, problems and threats rise due to the large democratization of the means of production, and especially regarding the physical ones. For instance, the recyclability of advanced nanomaterials is still questioned; weapons manufacturing could become easier; not to mention the implications on counterfeiting and on "intellectual property". It might be maintained that in contrast to the industrial paradigm whose competitive dynamics were about economies of scale, commons-based peer production and distributed manufacturing could develop economies of scope. While the advantages of scale rest on cheap global transportation, the economies of scope share infrastructure costs (intangible and tangible productive resources), taking advantage of the capabilities of the fabrication tools. And following Neil Gershenfeld in that "some of the least developed parts of the world need some of the most advanced technologies", commons-based peer production and distributed manufacturing may offer the necessary tools for thinking globally but act locally in response to certain problems and needs. As well as supporting individual personal manufacturing social and economic benefits are expected to result from the development of local production economies. In particular, the humanitarian and development sector are becoming increasingly interested in how distributed manufacturing can overcome the supply chain challenges of last mile distribution. Further, distributed manufacturing has been proposed as a key element in the Cosmopolitan localism or cosmolocalism framework to reconfigure production by prioritizing socio-ecological well-being over corporate profits, over-production and excess consumption. == Technology == By localizing manufacturing, distributed manufacturing may enable a balance between two opposite extreme qualities in technology development: Low technology and High tech. This balance is understood as an inclusive middle, a "mid-tech", that may go beyond the two polarities, incorporating them into a higher synthesis. Thus, in such an approach, low-tech and high-tech stop being mutually exclusive. They instead become a dialectic totality. Mid-tech may be abbreviated to "both…and…" instead of "neither…nor…". Mid-tech combines the efficiency and versatility of digital/automated technology with low-tech's potential for autonomy and resilience. == Contracting in Distributed Manufacturing == Research into contracting and order processing models tailored for distributed manufacturing has highlighted the need for flexible, role-based frameworks and advanced digital tools. These tools and frameworks are essential for addressing issues related to quality assurance, payment structures, legal compliance, and coordination among multiple actors. By addressing these challenges, contracting models for distributed manufacturing can unlock its potential for more localized, efficient, and sustainable production systems. A system prototype has been developed to simplify contracting for distributed manufacturing. This tool allows buyers to manage orders across multiple manufacturers using a single interface, automating workflows to ensure clarity and accountability for everyone involved. This research was led by the Internet of Production, as part of the mAkE project (African European Maker Innovation Ecosystem), funded by the European Horizon 2020 research and innovation programme.
Read more →
Commit (data management)

In computer science and data management, a commit is a behavior that marks the end of a transaction and provides Atomicity, Consistency, Isolation, and Durability (ACID) in transactions. The submission records are stored in the submission log for recovery and consistency in case of failure. In terms of transactions, the opposite of committing is giving up tentative changes to the transaction, which is rolled back. Due to the rise of distributed computing and the need to ensure data consistency across multiple systems, commit protocols have been evolving since their emergence in the 1970s. The main developments include the Two-Phase Commit (2PC) first proposed by Jim Gray, which is the fundamental core of distributed transaction management. Subsequently, the Three-phase Commit (3PC), Hypothesis Commit (PC), Hypothesis Abort (PA), and Optimistic Commit protocols gradually emerged, solving the problems of blocking and fault recovery. Today, new fields such as e-commerce payment and blockchain technology are emerging, and submission protocols play a significant role in various business areas. By effectively handling transactions, resolving faults and recovering problems, the commit protocol becomes crucial in ensuring the reliability and consistency of data management. == History == The concept of Commit originated in the late 1960s and early 1970s, when computer technology was rapidly advancing and data management was becoming an important requirement in business and finance. Enterprises have gradually replaced the traditional paper records with computers, which has fully improved the work efficiency. The reliability and consistency of data have become a necessary requirement. Transaction management at this stage is relatively simple, limited to using a single computer for processing. It merely effectively records the changes in data to ensure that the data remains stable after the transaction is completed or terminated. In the late 1970s, as database systems moved from a single calculator operation to multiple distributed collaborations, ensuring data consistency and reliability became a new challenge. In 1978, computer scientist Jim Gray proposed the famous two-phase Commit Protocol (2PC), which became an effective solution for distributed transaction management, successfully managing data synchronization problems between multiple nodes. However, this commit protocol has some potential transaction blocking problems when nodes fail. In the early 1980s, researchers discovered that although the two-step commit protocol was effective at synchronizing data, there could be long waits and even system crashes, with limitations. To improve this problem, people have begun to explore new and effective methods, including enhancing efficiency by reducing message communication during the protocol process. IBM's R database introduced the Assumed Commit and Assumed abort protocols, which contributed significantly to transaction management efficiency. These two protocols have greatly improved the processing efficiency of distributed transactions by reducing communication overhead and have become an important breakthrough in the technology of transaction commit protocols. By the early 1990s, with the increase in business demands and the complexity of transactions, enterprises required higher efficiency in distributed transaction processing. In order to adapt to the needs of different environments, the scientific community has gradually developed various variants of commit protocols to provide more flexible transaction management options for different needs. For example, the three-phase commit protocol promotes the commit of transactions more effectively and reduces the occurrence of blocking problems by adding a pre-commit protocol and a timeout mechanism. In the 21st century, with the popularization of mobile Internet and wireless technology, the commit protocol has been further developed, and researchers have begun to pay attention to how to reduce the blocking in the transaction process to solve the problem of broadband limitation, battery life and network instability in the mobile environment. The proposal of optimistic commit protocol marks the extension of commit technology from traditional database to the emerging mobile data field. This protocol allows transactions to temporarily use unconfirmed data, improving the user experience in cases of poor network conditions. In recent years, with the rise of blockchain and decentralized technologies, submission protocols and consensus mechanisms have gradually merged. These consensus algorithms play a role in tamper-proofing and preventing malicious attacks on node pairs in a decentralized environment. This enables commit to no longer be confined to the scope of traditional database management, but to become the core technology of trust computing and distributed ledgers, further expanding the application field of commit in the digital age. This integration has brought about extensive application impacts. Each transaction can achieve the effect of tracking global submissions through the verification of the consensus mechanism, becoming an important technical foundation for promoting the circulation of digital assets, the operation of cryptocurrencies and decentralized applications. == Commit Protocol Types == In the world of data management, a transaction is a series of database operations, such as bank transfers and order submission. In order to ensure the accuracy, consistency, and security of the data, transactions are usually completed completely, or cancelled completely, leaving no partially completed results. Commit protocol is the method used to coordinate this process. Different protocols are applicable to different submission scenarios and have their own advantages and disadvantages. There are four major commit protocols. === Two-Phase Commit (2PC) === The two-phase commit protocol is the most classic and broadest approach to distributed transactions, which includes both a preparation phase and a commit phase. This commit protocol is designed to allow the database coordinator to determine if all participating nodes agree. The preparation phase is the phase in which the coordination node sends a ready to commit request to all nodes participating in the transaction. The commit phase is a global commit after all participating nodes are ready, and if no agreement is reached, all nodes roll back the transaction and undo all previous operations. Although the two-phase commit protocol is the easiest to operate and widely used, its obvious drawback is that it can cause transactions to be blocked for a long time when nodes fail, resulting in a decline in system performance and making it difficult to terminate or continue immediately. === Three-Phase Commit (3PC) === The three-phase commit protocol is an improved non-blocking protocol based on 2PC, which is divided into three stages: preparation, pre-commit and commit. Firstly, each node sends a "preparation" request. After confirmation, a "pre-submission" stage is added. At this point, each node has completed most of the preparatory work and is waiting for the final confirmation. Finally, in the formal commit stage, after all nodes send the "commit" request, the transaction is completed and committed. Compared with 2PC, it increases the timeout mechanism, avoids the blocking problem caused by single point of failure, and improves the reliability of the system. The three-phase commit protocol significantly optimizes transaction reliability, but adds additional overhead for message transmission and state maintenance. It is more suitable for distributed application scenarios with high transaction sensitivity and no acceptance of long waiting times. === Presumed Commit (PC) and Presumed Abort (PA) === Presumed Commit (PC) is the default that the transaction will be committed successfully and rollback will be notified unless an anomaly is encountered. This commit reduces the message overhead and logging costs of a normal commits. Presumed Abort (PA) is assumed that the default state of the transaction is a rollback and will only be committed when all nodes have explicitly agreed. This commit is applicable to transactions that are not updated frequently or have a low probability of successful commit. The IBM R Distributed Database management System was the first to propose and practice the PC and PA protocols, handling distributed transaction management very efficiently and becoming a classic case in the field of database transaction management. === Optimistic Commit Protocol === With the rise of the Internet, the previous commit protocols are facing new challenges, especially in mobile scenarios with unstable networks. Excessively long transaction waiting times can affect the user experience. The Optimistic Commit Protocol allows a transaction to temporarily access uncommitted data before committing to avoid wait times. This type of commit is suitable f
Read more →
Memory-hard function

In cryptography, a memory-hard function (MHF) is a function that costs a significant amount of memory to efficiently evaluate. It differs from a memory-bound function, which incurs cost by slowing down computation through memory latency. MHFs have found use in key stretching and proof of work as their increased memory requirements significantly reduce the computational efficiency advantage of custom hardware over general-purpose hardware compared to non-MHFs. == Introduction == MHFs are designed to consume large amounts of memory on a computer in order to reduce the effectiveness of parallel computing. In order to evaluate the function using less memory, a significant time penalty is incurred. As each MHF computation requires a large amount of memory, the number of function computations that can occur simultaneously is limited by the amount of available memory. This reduces the efficiency of specialised hardware, such as application-specific integrated circuits and graphics processing units, which utilise parallelisation, in computing a MHF for a large number of inputs, such as when brute-forcing password hashes or mining cryptocurrency. == Motivation and examples == Bitcoin's proof-of-work uses repeated evaluation of the SHA-256 function, but modern general-purpose processors, such as off-the-shelf CPUs, are inefficient when computing a fixed function many times over. Specialized hardware, such as application-specific integrated circuits (ASICs) designed for Bitcoin mining, can use 30,000 times less energy per hash than x86 CPUs whilst having much greater hash rates. This led to concerns about the centralization of mining for Bitcoin and other cryptocurrencies. Because of this inequality between miners using ASICs and miners using CPUs or off-the shelf hardware, designers of later proof-of-work systems utilised hash functions for which it was difficult to construct ASICs that could evaluate the hash function significantly faster than a CPU. As memory cost is platform-independent, MHFs have found use in cryptocurrency mining, such as for Litecoin, which uses scrypt as its hash function. They are also useful in password hashing because they significantly increase the cost of trying many possible passwords against a leaked database of hashed passwords without significantly increasing the computation time for legitimate users. == Measuring memory hardness == There are various ways to measure the memory hardness of a function. One commonly seen measure is cumulative memory complexity (CMC). In a parallel model, CMC is the sum of the memory required to compute a function over every time step of the computation. Other viable measures include integrating memory usage against time and measuring memory bandwidth consumption on a memory bus. Functions requiring high memory bandwidth are sometimes referred to as "bandwidth-hard functions". == Variants == MHFs can be categorized into two different groups based on their evaluation patterns: data-dependent memory-hard functions (dMHF) and data-independent memory-hard functions (iMHF). As opposed to iMHFs, the memory access pattern of a dMHF depends on the function input, such as the password provided to a key derivation function. Examples of dMHFs are scrypt and Argon2d, while examples of iMHFs are Argon2i and catena. Many of these MHFs have been designed to be used as password hashing functions because of their memory hardness. A notable problem with dMHFs is that they are prone to side-channel attacks such as cache timing. This has resulted in a preference for using iMHFs when hashing passwords. However, iMHFs have been mathematically proven to have weaker memory hardness properties than dMHFs.
Read more →
Cryptosystem

In cryptography, a cryptosystem is a suite of cryptographic algorithms needed to implement a particular security service, such as confidentiality (encryption). Typically, a cryptosystem consists of three algorithms: one for key generation, one for encryption, and one for decryption. The term cipher (sometimes cypher) is often used to refer to a pair of algorithms, one for encryption and one for decryption. Therefore, the term cryptosystem is most often used when the key generation algorithm is important. For this reason, the term cryptosystem is commonly used to refer to public key techniques; however both "cipher" and "cryptosystem" are used for symmetric key techniques. == Formal definition == Mathematically, a cryptosystem or encryption scheme can be defined as a tuple ( P , C , K , E , D ) {\displaystyle ({\mathcal {P}},{\mathcal {C}},{\mathcal {K}},{\mathcal {E}},{\mathcal {D}})} with the following properties. P {\displaystyle {\mathcal {P}}} is a set called the "plaintext space". Its elements are called plaintexts. C {\displaystyle {\mathcal {C}}} is a set called the "ciphertext space". Its elements are called ciphertexts. K {\displaystyle {\mathcal {K}}} is a set called the "key space". Its elements are called keys. E = { E k : k ∈ K } {\displaystyle {\mathcal {E}}=\{E_{k}:k\in {\mathcal {K}}\}} is a set of functions E k : P → C {\displaystyle E_{k}:{\mathcal {P}}\rightarrow {\mathcal {C}}} . Its elements are called "encryption functions". D = { D k : k ∈ K } {\displaystyle {\mathcal {D}}=\{D_{k}:k\in {\mathcal {K}}\}} is a set of functions D k : C → P {\displaystyle D_{k}:{\mathcal {C}}\rightarrow {\mathcal {P}}} . Its elements are called "decryption functions". For each e ∈ K {\displaystyle e\in {\mathcal {K}}} , there is d ∈ K {\displaystyle d\in {\mathcal {K}}} such that D d ( E e ( p ) ) = p {\displaystyle D_{d}(E_{e}(p))=p} for all p ∈ P {\displaystyle p\in {\mathcal {P}}} . Note; typically this definition is modified in order to distinguish an encryption scheme as being either a symmetric-key or public-key type of cryptosystem. == Examples == A classical example of a cryptosystem is the Caesar cipher. A more contemporary example is the RSA cryptosystem. Another example of a cryptosystem is the Advanced Encryption Standard (AES). AES is a widely used symmetric encryption algorithm that has become the standard for securing data in various applications. Paillier cryptosystem is another example used to preserve and maintain privacy and sensitive information. It is featured in electronic voting, electronic lotteries and electronic auctions.
Read more →
Image destriping

Image destriping is the process of removing stripes or streaks from images and videos without disrupting the original image/video. These artifacts plague a range of fields in scientific imaging including atomic force microscopy, light sheet fluorescence microscopy, and planetary satellite imaging. The most common image processing techniques to reduce stripe artifacts is with Fourier filtering. Unfortunately, filtering methods risk altering or suppressing useful image data. Methods developed for multiple-sensor imaging systems in planetary satellites use statistical-based methods to match signal distribution across multiple sensors. More recently, a new class of approaches leverage compressed sensing, to regularize an optimization problem, and recover stripe free images. In many cases, these destriped images have little to no artifacts, even at low signal to noise ratios.
Read more →
SFINKS

Sfinks (Polish for "Sphynx") was also the initial name of the Janusz A. Zajdel Award In cryptography, SFINKS is a stream cypher algorithm developed by An Braeken, Joseph Lano, Nele Mentens, Bart Preneel, and Ingrid Verbauwhede. It includes a message authentication code. It has been submitted to the eSTREAM Project of the eCRYPT network. In 2005, Nicolas T. Courtois noted that, while the cipher is elegant and secure against some simple algebraic attacks, it is vulnerable to more elaborate known attacks.
Read more →
Critical data studies

Critical data studies is the exploration of and engagement with social, cultural, and ethical challenges that arise when working with big data. It is through various unique perspectives and taking a critical approach that this form of study can be practiced. As its name implies, critical data studies draws heavily on the influence of critical theory, which has a strong focus on addressing the organization of power structures. This idea is then applied to the study of data. Interest in this unique field of critical data studies began in 2011 with scholars danah boyd and Kate Crawford posing various questions for the critical study of big data and recognizing its potential threatening impacts on society and culture. It was not until 2014, and more exploration and conversations, that critical data studies was officially coined by scholars Craig Dalton and Jim Thatcher. They put a large emphasis on understanding the context of big data in order to approach it more critically. Researchers such as David Ribes, Robert Soden, Seyram Avle, Sarah E. Fox, and Phoebe Sengers focus on understanding data as a historical artifact and taking an interdisciplinary approach towards critical data studies. Other key scholars in this discipline include Rob Kitchin and Tracey P. Lauriault who focus on reevaluating data through different spheres. Various critical frameworks that can be applied to analyze big data include Feminist, Anti-Racist, Queer, Indigenous, Decolonial, Anti-Ableist, as well as Symbolic and Synthetic data science. These frameworks help to make sense of the data by addressing power, biases, privacy, consent, and underrepresentation or misrepresentation concerns that exist in data as well as how to approach and analyze this data with a more equitable mindset. == Motivation == In their article in which they coin the term 'critical data studies,' Dalton and Thatcher also provide several justifications as to why data studies is a discipline worthy of a critical approach. First, 'big data' is an important aspect of twenty-first century society, and the analysis of 'big data' allows for a deeper understanding of what is happening and for what reasons. Big data is important to critical data studies because it is the type of data used within this field. Big data does not necessarily refer to a large data set, it can have a data set with millions of rows, but also a data set that just has a wide variety and expansive scope of data with a smaller type of dataset. As well as having whole populations in the data set and not just sample sizes. Furthermore, big data as a technological tool and the information that it yields are not neutral, according to Dalton and Thatcher, making it worthy of critical analysis in order to identify and address its biases. Building off this idea, another justification for a critical approach is that the relationship between big data and society is an important one, and therefore worthy of study. Ribes et. al. argue there is a need for an interdisciplinary understanding of data as a historical artifact as a motivating aspect of critical data studies.The overarching consensus in the Computer-Supported Cooperative Work (CSCW) field, is that people should speak for the data, and not let the data speak for itself. The sources of big data and it’s relationship to varied metadata can be a complicated one, which leads to data disorder and a need for an ethical analysis. Additionally, Iliadis and Russo (2016) have called for studying data assemblages. This is to say, data has innate technological, political, social, and economic histories that should be taken into consideration. Kitchin argues data is almost never raw, and it is almost always cooked, meaning that it is always spoken for by the data scientists utilizing it. Thus, Big Data should be open to a variety of perspectives, especially those of cultural and philosophical nature. Further, data contains hidden histories, ideologies, and philosophies. Big data technology can cause significant changes in society's structure and in the everyday lives of people, and, being a product of society, big data technology is worthy of sociological investigation. Moreover, data sets are almost never completely without any influence. Rather, data are shaped by the vision or goals of those gathering the data, and during the data collection process, certain things are quantified, stored, sorted and even discarded by the research team. A critical approach is thus necessary in order to understand and reveal the intent behind the information being presented.One of these critical approaches has been through feminist data studies. This method applies feminist principles to critical studies and data collecting and analysis. The goal of this is to address the power imbalance in data science and society. According to Catherine D’Ignazio and Lauren F. Klein, a power analysis can be performed by examining power, challenging power, evaluating emotion and embodiment, rethinking binaries and hierarchies, embracing pluralism, considering context, and making labor visible. Feminist data studies is part of the movement towards making data to benefit everyone and not to increase existing inequalities. Moreover, data alone cannot speak for themselves; in order to possess any concrete meaning, data must be accompanied by theoretical insight or alternative quantitative or qualitative research measures. Based on different social topics such as anti-racist data studies, critical data studies give a focus on those social issues concerning data. Specifically in anti-racist data studies they use a classification approach to get representation for those within that community. Desmond Upton Patton and others used their own classification system in the communities of Chicago to help target and reduce violence with young teens on twitter. They had students in those communities help them to decipher the terminology and emojis of these teens to target the language used in tweets that followed with violence outside of the computer screens. This is just one real world example of critical data studies and its application. Dalton and Thatcher argue that if one were to only think of data in terms of its exploitative power, there is no possibility of using data for revolutionary, liberatory purposes. Finally, Dalton and Thatcher propose that a critical approach in studying data allows for 'big data' to be combined with older, 'small data,' and thus create more thorough research, opening up more opportunities, questions and topics to be explored. == Issues and concerns for critical data scholars == Data plays a pivotal role in the emerging knowledge economy, driving productivity, competitiveness, efficiency, sustainability, and capital accumulation. The ethical, political, and economic dimensions of data dynamically evolve across space and time, influenced by changing regimes, technologies, and priorities. Technically, the focus lies on handling, storing, and analyzing vast data sets, utilizing machine learning-based data mining and analytics. This technological advancement raises concerns about data quality, encompassing validity, reliability, authenticity, usability, and lineage. The use of data in modern society brings about new ways of understanding and measuring the world, but also brings with it certain concerns or issues. Data scholars attempt to bring some of these issues to light in their quest to be critical of data. Technical and organizational issues could include the scope of the data set, meaning there is too little or too much data to work with, leading to inaccurate results. It becomes crucial for critical data scholars to carefully consider the adequacy of data volume for their analyses. The quality of the data itself is another facet of concern. The data itself could be of poor quality, such as an incomplete or messy data set with missing or inaccurate data values. This would lead researchers to have to make edits and assumptions about the data itself. Addressing these issues often requires scholars to make edits and assumptions about the data to ensure its reliability and relevance. Data scientists could have improper access to the actual data set, limiting their abilities to analyze it. Linnet Taylor explains how gaps in data can arise when people of varying levels of power have certain rights to their data sources. These people in power can control what data is collected, how it is displayed and how it is analyzed. The capabilities of the research team also play a crucial role in the quality of data analytics. The research team may have inadequate skills or organizational capabilities which leads to the actual analytics performed on the dataset to be biased. This can also lead to ecological fallacies, meaning an assumption is made about an individual based on data or results from a larger group of people. These technical and organizational challenges highlight the complexity of working with data and
Read more →
G.9963

Recommendation G.9963 is a home networking standard under development at the International Telecommunication Union standards sector, the ITU-T. It was begun in 2010 by ITU-T to add multiple-input and multiple-output (known as MIMO) capabilities to the G.hn standard originally defined in Recommendation G.9960. The standard is also known as "G.hn-mimo". As part of the family of G.hn standards, G.9963 was endorsed by the HomeGrid Forum.
Read more →
Computer audition

Computer audition (CA) or machine listening is the general field of study of algorithms and systems for audio interpretation by machines. Since the notion of what it means for a machine to "hear" is very broad and somewhat vague, computer audition attempts to bring together several disciplines that originally dealt with specific problems or had a concrete application in mind. The engineer Paris Smaragdis, interviewed in Technology Review, talks about these systems — "software that uses sound to locate people moving through rooms, monitor machinery for impending breakdowns, or activate traffic cameras to record accidents." Inspired by models of human audition, CA deals with questions of representation, transduction, grouping, use of musical knowledge and general sound semantics for the purpose of performing intelligent operations on audio and music signals by the computer. Technically this requires a combination of methods from the fields of signal processing, auditory modelling, music perception and cognition, pattern recognition, and machine learning, as well as more traditional methods of artificial intelligence for musical knowledge representation. == Applications == Like computer vision versus image processing, computer audition versus audio engineering deals with understanding of audio rather than processing. It also differs from problems of speech understanding by machine since it deals with general audio signals, such as natural sounds and musical recordings. Applications of computer audition are widely varying, and include search for sounds, genre recognition, acoustic monitoring, music transcription, score following, audio texture, music improvisation, emotion in audio and so on. == Related disciplines == Computer Audition overlaps with the following disciplines: Music information retrieval: methods for search and analysis of similarity between music signals. Auditory scene analysis: understanding and description of audio sources and events. Computational musicology and mathematical music theory: use of algorithms that employ musical knowledge for analysis of music data. Computer music: use of computers in creative musical applications. Machine musicianship: audition driven interactive music systems. == Areas of study == Since audio signals are interpreted by the human ear–brain system, that complex perceptual mechanism should be simulated somehow in software for "machine listening". In other words, to perform on par with humans, the computer should hear and understand audio content much as humans do. Analyzing audio accurately involves several fields: electrical engineering (spectrum analysis, filtering, and audio transforms); artificial intelligence (machine learning and sound classification); psychoacoustics (sound perception); cognitive sciences (neuroscience and artificial intelligence); acoustics (physics of sound production); and music (harmony, rhythm, and timbre). Furthermore, audio transformations such as pitch shifting, time stretching, and sound object filtering, should be perceptually and musically meaningful. For best results, these transformations require perceptual understanding of spectral models, high-level feature extraction, and sound analysis/synthesis. Finally, structuring and coding the content of an audio file (sound and metadata) could benefit from efficient compression schemes, which discard inaudible information in the sound. Computational models of music and sound perception and cognition can lead to a more meaningful representation, a more intuitive digital manipulation and generation of sound and music in musical human-machine interfaces. The study of CA could be roughly divided into the following sub-problems: Representation: signal and symbolic. This aspect deals with time-frequency representations, both in terms of notes and spectral models, including pattern playback and audio texture. Feature extraction: sound descriptors, segmentation, onset, pitch and envelope detection, chroma, and auditory representations. Musical knowledge structures: analysis of tonality, rhythm, and harmonies. Sound similarity: methods for comparison between sounds, sound identification, novelty detection, segmentation, and clustering. Sequence modeling: matching and alignment between signals and note sequences. Source separation: methods of grouping of simultaneous sounds, such as multiple pitch detection and time-frequency clustering methods. Auditory cognition: modeling of emotions, anticipation and familiarity, auditory surprise, and analysis of musical structure. Multi-modal analysis: finding correspondences between textual, visual, and audio signals. === Representation issues === Computer audition deals with audio signals that can be represented in a variety of fashions, from direct encoding of digital audio in two or more channels to symbolically represented synthesis instructions. Audio signals are usually represented in terms of analogue or digital recordings. Digital recordings are samples of acoustic waveform or parameters of audio compression algorithms. One of the unique properties of musical signals is that they often combine different types of representations, such as graphical scores and sequences of performance actions that are encoded as MIDI files. Since audio signals usually comprise multiple sound sources, then unlike speech signals that can be efficiently described in terms of specific models (such as source-filter model), it is hard to devise a parametric representation for general audio. Parametric audio representations usually use filter banks or sinusoidal models to capture multiple sound parameters, sometimes increasing the representation size in order to capture internal structure in the signal. Additional types of data that are relevant for computer audition are textual descriptions of audio contents, such as annotations, reviews, and visual information in the case of audio-visual recordings. === Features === Description of contents of general audio signals usually requires extraction of features that capture specific aspects of the audio signal. Generally speaking, one could divide the features into signal or mathematical descriptors such as energy, description of spectral shape etc., statistical characterization such as change or novelty detection, special representations that are better adapted to the nature of musical signals or the auditory system, such as logarithmic growth of sensitivity (bandwidth) in frequency or octave invariance (chroma). Since parametric models in audio usually require very many parameters, the features are used to summarize properties of multiple parameters in a more compact or salient representation. === Musical knowledge === Finding specific musical structures is possible by using musical knowledge as well as supervised and unsupervised machine learning methods. Examples of this include detection of tonality according to distribution of frequencies that correspond to patterns of occurrence of notes in musical scales, distribution of note onset times for detection of beat structure, distribution of energies in different frequencies to detect musical chords and so on. === Sound similarity and sequence modeling === Comparison of sounds can be done by comparison of features with or without reference to time. In some cases an overall similarity can be assessed by close values of features between two sounds. In other cases when temporal structure is important, methods of dynamic time warping need to be applied to "correct" for different temporal scales of acoustic events. Finding repetitions and similar sub-sequences of sonic events is important for tasks such as texture synthesis and machine improvisation. === Source separation === Since one of the basic characteristics of general audio is that it comprises multiple simultaneously sounding sources, such as multiple musical instruments, people talking, machine noises or animal vocalization, the ability to identify and separate individual sources is very desirable. Unfortunately, there are no methods that can solve this problem in a robust fashion. Existing methods of source separation rely sometimes on correlation between different audio channels in multi-channel recordings. The ability to separate sources from stereo signals requires different techniques than those usually applied in communications where multiple sensors are available. Other source separation methods rely on training or clustering of features in mono recording, such as tracking harmonically related partials for multiple pitch detection. Some methods, before explicit recognition, rely on revealing structures in data without knowing the structures (like recognizing objects in abstract pictures without attributing them meaningful labels) by finding the least complex data representations, for instance describing audio scenes as generated by a few tone patterns and their trajectories (polyphonic voices) and acoustical contours drawn by a tone (c
Read more →
Social media coverage of the Olympics

Over the years, television broadcast rights have distinguished what Olympic-related content can be accessed by fans online. By doing so, mobile-friendly social platforms began to integrate into the Olympics. Athletes and fans use these platforms to share live updates, special moments, and behind-the-scenes specials. Various social media platforms have been used for Olympic content, including Twitter and Facebook. Some marketers credit social media for prompting the official U.S. broadcasters, NBC, to live stream events, including early rounds. == Background == The Olympics is able to advertise to its viewers and its host country with the use of data it collects through Social media marketing. Prominent social media platforms include: Twitter, Facebook, Instagram, Tumblr, YouTube, Google, MSN, Yahoo and many more. Campaign Initiatives and Artificial Intelligence technologies have been used to analyze the social media content of users. Information from consumers such as their preferences, demographics, age and locality are all analyzed to gain consumer insight. Campaign initiatives and AI technologies were used for such purposes in the 2010 Vancouver Winter Olympics and are in use currently. Social media marketing of the Olympics is a new phenomena, beginning prior to the 2008 Beijing Olympics == Variations == There are two classifications of social media marketing recognized by the IOC: Officially sanctioned content from rights holders and sponsors that maximizes the use of Olympic content (imagery, hashtag) Unofficial content that is generated by brands that leverage the excitement of the Olympics == 2008 Beijing Summer Olympics == Social media marketing emerged as a phenomenon during the 2008 Beijing Olympics, which progressed as a marketing and an advertising tactic ever since. The Beijing Olympics became the test subject for social media marketing initiatives started by advertising agencies. In 2008, social media marketing began the transition from one-sided communication to mass communication of the Olympic Games. Although social media marketing of the Olympic Games began in 2008, the audience to the Olympics was still primarily reached through television–reaching an audience of 4.3 billion viewers. At the time, the viewers of the Olympic Games through Internet website platforms made up an audience of approximately 390 million individuals. What was the beginning of Olympic social media marketing, was also the beginning of a more globalized experience of the Olympic Games via social media. Twitter, now a prominent social media platform, began in 2006 and grew to three million active users by the beginning of the 2008 Beijing Olympics. Members of Facebook, another prominent social media platform, tracking the Olympic Games grew from approximately one million during the Olympic Games of Athens 2004 to 90 million during the 2008 Beijing Olympics. Social media use, in general, increased by 24 percent between 2007 and 2008–from 63 percent of U.S. adults to 87 percent of U.S. adults. == 2010 Vancouver Winter Olympics == The International Olympic Committee (IOC) deemed The Vancouver Winter Olympics as "the first social media games” based on its fan base through social media platforms. The IOC launched their Facebook page a month before the games began, attracting 1.5 million fans. Shifting to online viewing attracted a younger audience than past Olympic games with over 60 percent of Facebook fans being under 24 years of age. Athletes like Lindsey Vonn and Shaun White reached fans on social media as the platform posted behind-the-scenes coverage on their experiences. The IOC used social media to create competitions between athletes and fans streamed online. Its YouTube channel hosted a “Best of Us” challenge in which the public could compete in games with their favorite athletes, acquiring three million viewers. Photos spread across social media platforms, such as Flickr, which had 11,000 photos posted by 600 photographers, bringing a new perspective to the games. Twitter contributed constant live updates of the competitions. The IOC's Twitter following doubled to 12,000 followers during the Vancouver Olympics, creating a larger viewer population for the games. The IOC created social media guidelines as more athletes and fans got online to interact with the Olympics. Social media was still relatively new as a marketing platform, so these guidelines confused many individuals. == 2012 London Summer Olympics == The London 2012 Olympic Games succeeded in broadcasting, participation and marketing. For the first time, the IOC broadcast the Olympic Games live and on-demand through YouTube, allowing fans to access the Games anytime, anywhere through live streaming. The combination of conventional broadcasting and mobile platforms reached a global audience of 4.8 billion people. Social media soared with Facebook, Twitter and Google+, attracting 4.7 million followers. Athletes shared photographs, interacted online with fans and updated daily, either in person or via an agent. Instagram was established by 2012, making itself a premier photo-sharing platform perfect for athletes to capture their emotions. Lewis Wiltshire, head of sport for Twitter UK said, "Never before have fans had such direct access to their sporting heroes." Social media created conversation on fan opinions regarding athletes, including 962,756 total mentions of Usain Bolt, “Fastest Man in History,” who defended the 100 meter and 200 meter gold medals. Michael Phelps followed with 828,081 total mentions. Olympic sponsors were active on social media; created several campaigns to promote their brands; and inspired viewers with mass participation and personalized events. The Adidas “Take the Stage” Campaign recognized talent around the world, installing a photo booth and inviting the 550 Olympics athletes to take the stage. (IOC Marketing Report 2012). David Beckham surprised fans at the photo booth in Westfield shopping centre, gaining popularity in UK media. Coca-Cola, Acer Inc., McDonald's, Visa Inc. and several others used similar tactics of participation to attract viewers. == 2014 Sochi Winter Olympics == === Channels === The 2014 Winter Olympic Games were held in Sochi, a city in Krasnodar Krai, Russia, establishing the first “social media Olympics” for Russia. The most popular Russian social media and networking service, VK, created an Olympic page, similar to Facebook's. The Olympic VK page has 2.8 million fans and—the most popular official community on the platform. Throughout the games, VK had 54 million Olympic mentions, an average of 1.5 million per day. Numbers grew on other social media pages: more than 2 million fans joined the Olympic Facebook page, 168,101 followed the Olympic Twitter, 150,000 followed the Olympic Instagram and three million visited the Olympic website in February 2014. There were 90,000 total updates on social media by Sochi 2014 Olympians and teams. The United States was the most active country during the games logging 22,598 posts across Facebook, Twitter, and Instagram. === Engagement === With social media there is also hashtags. The most popular hashtag was #sochi2014 with almost 11,000 uses. The next top five hashtags were #wearewinter, #teamusa, #olympics, #goaus and #wirfuerD. Another popular hashtag was #Sochiproblems, depicting local struggles. Photos of the poor state of Sochi on all platforms made the games the number one trending topic one week before the opening ceremony. #SochiFail and #SochiProblems gave multiple reports of the poor living arrangements, incomplete construction, broken elevators, and polluted waters. This was one way that social media provided awareness to its users. === Media Perceptions === Media perceptions varied during the games; the Olympics was viewed as a confrontation between Eastern and Western Civilizations. The LGBT community took a stand against the games. Sponsors for the games including Coca-Cola, Mcdonald's, and P&G protested against Russian authorities and Russian anti-LGBT laws. Many protests took a stand against Russian laws, which created a discussion between human rights advocates. Advocates believed organizations should not promote certain values in western markets while supporting an anti-human rights government in another market. == 2016 Rio Summer Olympics == Social media marketing was an influential tool in the promotion and analysis of the 2016 Rio Olympics. Thomas Bach, President of the International Olympic Committee said that the power of sport demonstrates that diversity and interconnectedness can enlighten us all. With over 25,000+ sources of accredited media covering the games, the 2016 games were the most consumed Olympic games to date. Marketing for the Rio Olympics began in 2013 and ultimately lasted 3 years. There were 26 million visits to Olympic.org, the official website of the Olympic games, and over 7 billion views of official Olympic content on social media. There were o
Read more →
Data preservation

Data preservation is the act of conserving and maintaining both the safety and integrity of data. Preservation is done through formal activities that are governed by policies, regulations and strategies directed towards protecting and prolonging the existence and authenticity of data and its metadata. Data can be described as the elements or units in which knowledge and information is created, and metadata are the summarizing subsets of the elements of data; or the data about the data. The main goal of data preservation is to protect data from being lost or destroyed and to contribute to the reuse and progression of the data. == History == Most historical data collected over time has been lost or destroyed. War and natural disasters combined with the lack of materials and necessary practices to preserve and protect data has caused this. Usually, only the most important data sets were saved, such as government records and statistics, legal contracts and economic transactions. Scientific research and doctoral theses data have mostly been destroyed from improper storage and lack of data preservation awareness and execution. Over time, data preservation has evolved and has generated importance and awareness. We now have many different ways to preserve data and many different important organizations involved in doing so. The first digital data preservation storage solutions appeared in the 1950s, which were usually flat or hierarchically structured. While there were still issues with these solutions, it made storing data much cheaper, and more easily accessible. In the 1970s relational databases as well as spreadsheets appeared. Relational data bases structure data into tables using structured query languages which made them more efficient than the preceding storage solutions, and spreadsheets hold high volumes of numeric data which can be applied to these relational databases to produce derivative data. More recently, non-relational (non-structured query language) databases have appeared as complements to relational databases which hold high volumes of unstructured or semi-structured data. == Importance == The scope of data preservation is vast. Everything from governmental to business records to art essentially can be represented as data, and is amenable to be lost. This then leads to loss of human history, for perpetuity. Data can be lost on a small or independent scale whether it's personal data loss, or data loss within businesses and organizations, as well as on a larger or national or global scale which can negatively and potentially permanently affect things such as environmental protection, medical research, homeland security, public health and safety, economic development and culture. The mechanisms of data loss are also as many as they are varied, spanning from disaster, wars, data breaches, negligence, all the way through simple forgetting to natural decay. Ways in which data collections can be used when preserved and stored properly can be seen through the U.S. Geological Survey, which stores data collections on natural hazards, natural resources, and landscapes. The data collected by the Survey is used by federal and state land management agencies towards land use planning and management, and continually needs access to historical reference data. == Related Concepts == In contrast, data holdings are collections of gathered data that are informally kept, and not necessarily prepared for long-term preservation. For example, a collection or back-up of personal files. Data holdings are generally the storage methods used in the past when data has been lost due to environmental and other historical disasters. Furthermore, data retention differs from data preservation in the sense that by definition, to retain an object (data) is to hold or keep possession or use of the object. To preserve an object is to protect, maintain and keep up for future use. Retention policies often circle around when data should be deleted on purpose as well, and held from public access, while preservation prioritizes permanence and more widely shared access. Thus, data preservation exceeds the concept of having or possessing data or back up copies of data. Data preservation ensures reliable access to data by including back-up and recovery mechanisms that precede the event of a disaster or technological change. == Methods == === Digital === Digital preservation, is similar to data preservation, but is mainly concerned with technological threats, and solely digital data. Essentially digital data is a set of formal activities to enable ongoing or persistent use and access of digital data exceeding the occurrence of technological malfunction or change. Digital preservation is aware of the inevitable change in technology and protocols, and prepares for data that will need to be accessible across new types of technologies and platforms while the integrity of the data and metadata are being conserved. Technology, while providing great process in conserving data that may not have been possible in the past, is also changing at such a quick rate that digital data may not be accessible anymore due to the format being incompatible with new software. Without the use of data preservation much of our existing digital data is at risk. The majority of methods used towards data preservation today are digital methods, which are so far the most effective methods that exist. === Archives === Archives are a collection of historical documents and records. Archives contribute and work towards the preservation of data by collecting data that is well organized, while providing the appropriate metadata to confirm it. An example of an important data archive is The LONI Image Data Archive, which is an archive that collects data regarding clinical trials and clinical research studies. === Catalogues, directories and portals === Catalogues, directories and portals are consolidated resources which are kept by individual institutions, and are associated with data archives and holdings. In other words, the data is not presented on the site, but instead might act as metadata and aggregators, and may administer thorough inventories. === Repositories === Repositories are places where data archives and holdings can be accessed and stored. The goal of repositories is to make sure that all requirements and protocols of archives and holdings are being met, and data is being certified to ensure data integrity and user trust. Single-site Repositories A repository that holds all data sets on a single site. An example of a major single-site repository the Data Archiving and Networking Services which is a repository which provides ongoing access to digital research resources for the Netherlands. Multi-Site Repositories A repository that hosts data set on multiple institutional sites. An example of a well known multi-site repository is OpenAIRE which is a repository that hosts research data and publications collaborating all of the EU countries and more. OpenAIRE promotes open scholarship and seeks to improves discover-ability and re-usability of data. Trusted Digital Repository A repository that seeks to provide reliable, trusted access over a long period of time. The repository can be single or multi-sited but must cooperate with the Reference Model for an Open Archival Information System, as well as adhere to a set of rules or attributes that contribute to its trust such as having persistent financial responsibility, organizational buoyancy, administrative responsibility security and safety. An example of a trusted digital repository is The Digital Repository of Ireland (DRI) which is a multi-site repository that hosts Ireland's humanity and social science data sets. === Cyber Infrastructures === Cyber infrastructures which consists of archive collections which are made available through the system of hardware, technologies, software, policies, services and tools. Cyber infrastructures are geared towards the sharing of data supporting peer-to-peer collaborations and a cultural community. An example of a major cyber-infrastructure is The Canadian Geo-spatial Data Infrastructure which provides access to spatial data in Canada.
Read more →