AI Assistant In Adobe Acrobat

AI Assistant In Adobe Acrobat — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Wetware computer

  A wetware computer is an organic computer (which can also be known as an artificial organic brain or a neurocomputer) composed of organic material "wetware" such as "living" neurons. Wetware computers composed of neurons are different than conventional computers because they use biological materials, and offer the possibility of substantially more energy-efficient computing. While a wetware computer is still largely conceptual, there has been limited success with construction and prototyping, which has acted as a proof of the concept's realistic application to computing in the future. The most notable prototypes have stemmed from the research completed by biological engineer William Ditto during his time at the Georgia Institute of Technology. His work constructing a simple neurocomputer capable of basic addition from leech neurons in 1999 was a significant discovery for the concept. This research was a primary example driving interest in creating these artificially constructed, but still organic brains. == Origins and theoretical foundations == The term wetware came from cyberpunk fiction, notably through Gibson's Neuromancer, but was quickly taken up in scientific literature to explain computation by biological material. Theories of early biological computation borrowed from Alan Turing's morphogenesis model, which showed that chemical interactions could produce complex patterns without centralized control. Hopfield's associative memory networks also provided a foundation for biological information systems with fault tolerance and self-organization. == Major characteristics and processes == Biological wetware systems demonstrate dynamic reconfigurability underpinned by neuroplasticity and enable continuous learning and adaptation. Reaction-diffusion-based computing and molecular logic gates allow spatially parallel information processing unachievable in conventional systems. These systems also show fault tolerance and self-repair at the cellular and network level. The development of cerebral organoids—miniature lab-grown brains—demonstrates spontaneous learning behavior and suggests biological tissue as a viable computational substrate. == Overview == The concept of wetware is an application of specific interest to the field of computer manufacturing. Moore's law, which states that the number of transistors which can be placed on a silicon chip is doubled roughly every two years, has acted as a goal for the industry for decades, but as the size of computers continues to decrease, the ability to meet this goal has become more difficult, threatening to reach a plateau. Due to the difficulty in reducing the size of computers because of size limitations of transistors and integrated circuits, wetware provides an unconventional alternative. A wetware computer composed of neurons is an ideal concept because, unlike conventional materials which operate in binary (on/off), a neuron can shift between thousands of states, constantly altering its chemical conformation, and redirecting electrical pulses through over 200,000 channels in any of its many synaptic connections. Because of this large difference in the possible settings for any one neuron, compared to the binary limitations of conventional computers, the space limitations are far fewer. == Background == The concept of wetware is distinct and unconventional and draws slight resonance with both hardware and software from conventional computers. While hardware is understood as the physical architecture of traditional computational devices, comprising integrated circuits and supporting infrastructure, software represents the encoded architecture of storage and instructions. Wetware is a separate concept that uses the formation of organic molecules, mostly complex cellular structures (such as neurons), to create a computational device such as a computer. In wetware, the ideas of hardware and software are intertwined and interdependent. The molecular and chemical composition of the organic or biological structure would represent not only the physical structure of the wetware but also the software, being continually reprogrammed by the discrete shifts in electrical pulses and chemical concentration gradients as the molecules change their structures to communicate signals. The responsiveness of a cell, proteins, and molecules to changing conformations, both within their structures and around them, ties the idea of internal programming and external structure together in a way that is alien to the current model of conventional computer architecture. The structure of wetware represents a model where the external structure and internal programming are interdependent and unified; meaning that changes to the programming or internal communication between molecules of the device would represent a physical change in the structure. The dynamic nature of wetware borrows from the function of complex cellular structures in biological organisms. The combination of "hardware" and "software" into one dynamic, and interdependent system which uses organic molecules and complexes to create an unconventional model for computational devices is a specific example of applied biorobotics. === The cell as a model of wetware === Cells in many ways can be seen as their form of naturally occurring wetware, similar to the concept that the human brain is the preexisting model system for complex wetware. In his book Wetware: A Computer in Every Living Cell (2009) Dennis Bray explains his theory that cells, which are the most basic form of life, are just a highly complex computational structure, like a computer. To simplify one of his arguments a cell can be seen as a type of computer, using its structured architecture. In this architecture, much like a traditional computer, many smaller components operate in tandem to receive input, process the information, and compute an output. In an overly simplified, non-technical analysis, cellular function can be broken into the following components: Information and instructions for execution are stored as DNA in the cell, RNA acts as a source for distinctly encoded input, processed by ribosomes and other transcription factors to access and process the DNA and to output a protein. Bray's argument in favor of viewing cells and cellular structures as models of natural computational devices is important when considering the more applied theories of wetware to biorobotics. === Biorobotics === Wetware and biorobotics are closely related concepts, which both borrow from similar overall principles. A biorobotic structure can be defined as a system modeled from a preexisting organic complex or model such as cells (neurons) or more complex structures like organs (brain) or whole organisms. Unlike wetware, the concept of biorobotics is not always a system composed of organic molecules, but instead could be composed of conventional material which is designed and assembled in a structure similar or derived from a biological model. Biorobotics have many applications and are used to address the challenges of conventional computer architecture. Conceptually, designing a program, robot, or computational device after a preexisting biological model such as a cell, or even a whole organism, provides the engineer or programmer the benefits of incorporating into the structure the evolutionary advantages of the model. == Effects on users == Wetware technologies such as BCIs and neuromorphic chips offer new possibilities for user autonomy. For those with disabilities, such systems could restore motor or sensory functions and enhance quality of life. However, these technologies raise ethical questions: cognitive privacy, consent over biological data, and risk of exploitation. Without proper oversight, wetware technologies may also widen inequality, favoring those with access to cognitive enhancements. Open governance frameworks and ethical AI design grounded in neuro ethics will be essential. With the development of wetware devices, disparities in access could exacerbate social inequalities, benefiting those who have resources to enhance cognitive or physical abilities. It is necessary to create strong ethical frameworks, inclusive development practices, and open systems of governance to reduce risks and make sure that wetware advances are beneficial to all segments of society. == Applications and goals == === Basic neurocomputer composed of leech neurons === In 1999 William Ditto and his team of researchers at Georgia Institute of Technology and Emory University created a basic form of a wetware computer capable of simple addition by harnessing leech neurons. Leeches were used as a model organism due to the large size of their neuron, and the ease associated with their collection and manipulation. However, these results have never been published in a peer-reviewed journal, prompting questions about the validity of the claims. The computer was able to complete basic addition through electrical probes

  Read more →
• 

  Adaptive algorithm

  An adaptive algorithm is an algorithm that changes its behavior at the time it is run, based on information available and on a priori defined reward mechanism (or criterion). Such information could be the story of recently received data, information on the available computational resources, or other run-time acquired (or a priori known) information related to the environment in which it operates. Among the most used adaptive algorithms is the Widrow-Hoff’s least mean squares (LMS), which represents a class of stochastic gradient-descent algorithms used in adaptive filtering and machine learning. In adaptive filtering the LMS is used to mimic a desired filter by finding the filter coefficients that relate to producing the least mean square of the error signal (difference between the desired and the actual signal). For example, stable partition, using no additional memory is O(n lg n) but given O(n) memory, it can be O(n) in time. As implemented by the C++ Standard Library, stable_partition is adaptive and so it acquires as much memory as it can get (up to what it would need at most) and applies the algorithm using that available memory. Another example is adaptive sort, whose behavior changes upon the presortedness of its input. An example of an adaptive algorithm in radar systems is the constant false alarm rate (CFAR) detector. In machine learning and optimization, many algorithms are adaptive or have adaptive variants, which usually means that the algorithm parameters such as learning rate are automatically adjusted according to statistics about the optimisation thus far (e.g. the rate of convergence). Examples include adaptive simulated annealing, adaptive coordinate descent, adaptive quadrature, AdaBoost, Adagrad, Adadelta, RMSprop, and Adam. In data compression, adaptive coding algorithms such as Adaptive Huffman coding or Prediction by partial matching can take a stream of data as input, and adapt their compression technique based on the symbols that they have already encountered. In signal processing, the Adaptive Transform Acoustic Coding (ATRAC) codec used in MiniDisc recorders is called "adaptive" because the window length (the size of an audio "chunk") can change according to the nature of the sound being compressed, to try to achieve the best-sounding compression strategy.

  Read more →
• 

  Secure Electronic Delivery

  Secure Electronic Delivery (SED) is a service created in 2003 and provided by the British Library Document Supply Service (BLDSS). Its purpose is to enable faster delivery of digital materials as encrypted, copyright-compliant PDF Documents, to a personal e-mail address. These documents are supplied from the British Library via its On Demand service. When the British Library supplies articles electronically, it sends them securely in order to ensure its usage is permitted (research purposes) and copyright law is observed. == Methods == As the publishing industry, authors and creators become highly protective of their assets and intellectual property, they impose strict rules on delivery methods to prevent copyright infringement. Nowadays, DRM-enabled secure delivery appears to be the most widely used solution to address issues faced by libraries in supplying ebooks and digital materials to their users. SED, one of these solutions, is using Adobe LiveCycle Digital Rights Management (LCDRM) as an encryption method to deliver documents. == Advantages == SED offers convenience, quality and speed as documents are delivered upon request at any location and on any device. Requested articles are scanned for high quality reproduction, opened anywhere on any machine, including mobile devices. == Restrictions == The following are restrictions hold in a SED service implementation: The digital material is accessible only for 14 days via a link sent to a personal message. Due to copyright reasons, the material can be opened only once, saved for 14 days and does not allow a copy-paste action. Upon display, the material must be printed from the same device and reprinted only once. The On Demand encryption technology works best on the default Safari browser although other browsers may accommodate it.

  Read more →
• 

  AIVA

  AIVA (Artificial Intelligence Virtual Artist) is an electronic composer recognized by the SACEM. == Description == Created in February 2016, AIVA specializes in classical and symphonic music composition. It became the world's first virtual composer to be recognized by a music society (SACEM). By reading a large collection of existing works of classical music (written by human composers such as Bach, Beethoven, Mozart) AIVA is capable of detecting regularities in music and on this base composing on its own. The algorithm AIVA is based on deep learning and reinforcement learning architectures. Since January 2019, the company offers a commercial product, Music Engine, capable of generating short (up to 3 minutes) compositions in various styles (rock, pop, jazz, fantasy, shanty, tango, 20th century cinematic, modern cinematic, and Chinese). AIVA was presented at TED by Pierre Barreau. == Discography == AIVA is a published composer; its first studio album "Genesis" was released in November 2016. Second album "Among the Stars" in 2018. 2016 CD album « Genesis » Hv-Com – LEPM 048427. Track listing "Genesis": 2018 CD album « Among the Stars » Hv-Com – LEPM 048708 Avignon Symphonic Orchestra [ORAP] also performed Aiva's compositions [2] in April 2017.

  Read more →
• 

  Psychology of reasoning

  The psychology of reasoning (also known as the cognitive science of reasoning) is the study of how people reason, often broadly defined as the process of drawing conclusions to inform how people solve problems and make decisions. It overlaps with psychology, philosophy, linguistics, cognitive science, artificial intelligence, logic, and probability theory. Psychological experiments on how humans and other animals reason have been carried out for over 100 years. An enduring question is whether or not people have the capacity to be rational. Current research in this area addresses various questions about reasoning, rationality, judgments, intelligence, relationships between emotion and reasoning, and development. == Everyday reasoning == One of the most obvious areas in which people employ reasoning is with sentences in everyday language. Most experimentation on deduction has been carried out on hypothetical thought, in particular, examining how people reason about conditionals, e.g., If A then B. Participants in experiments make the modus ponens inference, given the indicative conditional If A then B, and given the premise A, they conclude B. However, given the indicative conditional and the minor premise for the modus tollens inference, not-B, about half of the participants in experiments conclude not-A and the remainder concludes that nothing follows. The ease with which people make conditional inferences is affected by context, as demonstrated in the well-known selection task developed by Peter Wason. Participants are better able to test a conditional in an ecologically relevant context, e.g., if the envelope is sealed then it must have a 50 cent stamp on it compared to one that contains symbolic content, e.g., if the letter is a vowel then the number is even. Background knowledge can also lead to the suppression of even the simple modus ponens inference Participants given the conditional if Lisa has an essay to write then she studies late in the library and the premise Lisa has an essay to write make the modus ponens inference 'she studies late in the library', but the inference is suppressed when they are also given a second conditional if the library stays open then she studies late in the library. Interpretations of the suppression effect are controversial Other investigations of propositional inference examine how people think about disjunctive alternatives, e.g., A or else B, and how they reason about negation, e.g., It is not the case that A and B. Many experiments have been carried out to examine how people make relational inferences, including comparisons, e.g., A is better than B. Such investigations also concern spatial inferences, e.g. A is in front of B and temporal inferences, e.g. A occurs before B. Other common tasks include categorical syllogisms, used to examine how people reason about quantifiers such as All or Some, e.g., Some of the A are not B. For example if all A are B and some B are C, what (if anything) follows? == Theories of reasoning == There are several alternative theories of the cognitive processes that human reasoning is based on. One view is that people rely on a mental logic consisting of formal (abstract or syntactic) inference rules similar to those developed by logicians in the propositional calculus. Another view is that people rely on domain-specific or content-sensitive rules of inference. A third view is that people rely on mental models, that is, mental representations that correspond to imagined possibilities. A fourth view is that people compute probabilities. One controversial theoretical issue is the identification of an appropriate competence model, or a standard against which to compare human reasoning. Initially classical logic was chosen as a competence model. Subsequently, some researchers opted for non-monotonic logic and Bayesian probability. Research on mental models and reasoning has led to the suggestion that people are rational in principle but err in practice. Connectionist approaches towards reasoning have also been proposed. Despite the ongoing debate about the cognitive processes involved in human reasoning, recent research has shown that multiple approaches can be useful in modeling human thinking. For instance, studies have found that people's reasoning is often influenced by their prior beliefs, which can be modeled using Bayesian probability theory. Additionally, research on mental models has shown that people tend to reason about problems by constructing multiple mental representations of the situation, which can help them to identify relevant features and make inferences based on their understanding of the problem. Moreover, connectionist approaches to reasoning have also gained attention, which focus on the neural network models that can learn from data and generalize to new situations. == Development of reasoning == It is an active question in psychology how, why, and when the ability to reason develops from infancy to adulthood. Jean Piaget's theory of cognitive development posited general mechanisms and stages in the development of reasoning from infancy to adulthood. According to the neo-Piagetian theories of cognitive development, changes in reasoning with development come from increasing working memory capacity, increasing speed of processing, and enhanced executive functions and control. Increasing self-awareness is also an important factor. In their book The Enigma of Reason, the cognitive scientists Hugo Mercier and Dan Sperber put forward an "argumentative" theory of reasoning, claiming that humans evolved to reason primarily to justify our beliefs and actions and to convince others in a social environment. Key evidence for their theory includes the errors in reasoning that solitary individuals are prone to when their arguments are not criticized, such as logical fallacies, and how groups become much better at performing cognitive reasoning tasks when they communicate with one another and can evaluate each other's arguments. Sperber and Mercier offer one attempt to resolve the apparent paradox that the confirmation bias is so strong despite the function of reasoning naively appearing to be to come to veridical conclusions about the world. The study of the development of reasoning abilities is an ongoing area of research in psychology, and multiple factors have been proposed to explain how, why, and when reasoning develops from infancy to adulthood. Recent research has suggested that early experiences and social interactions play a critical role in the development of reasoning abilities. For example, studies have shown that infants as young as six months old can engage in basic logical reasoning, such as reasoning about the relationship between objects and their properties. Furthermore, research has highlighted the importance of parental interaction and cognitive stimulation in the development of children's reasoning abilities. Additionally, studies have suggested that cultural factors, such as educational practices and the emphasis on critical thinking, can also influence the development of reasoning skills across different populations. == Different sorts of reasoning == Philip Johnson-Laird trying to taxonomize thought, distinguished between goal-directed thinking and thinking without goal, noting that association was involved in unrelated reading. He argues that goal directed reasoning can be classified based on the problem space involved in a solution, citing Allen Newell and Herbert A. Simon. Inductive reasoning makes broad generalizations from specific cases or observations. In this process of reasoning, general assertions are made based on past specific pieces of evidence. This kind of reasoning allows the conclusion to be false even if the original statement is true. For example, if one observes a college athlete, one makes predictions and assumptions about other college athletes based on that one observation. Scientists use inductive reasoning to create theories and hypotheses. Philip Johnson-Laird distinguished inductive from deductive reasoning, in that the former creates semantic information while the later does not . In opposition, deductive reasoning is a basic form of valid reasoning. In this reasoning process a person starts with a known claim or a general belief and from there asks what follows from these foundations or how will these premises influence other beliefs. In other words, deduction starts with a hypothesis and examines the possibilities to reach a conclusion. Deduction helps people understand why their predictions are wrong and indicates that their prior knowledge or beliefs are off track. An example of deduction can be seen in the scientific method when testing hypotheses and theories. Although the conclusion usually corresponds and therefore proves the hypothesis, there are some cases where the conclusion is logical, but the generalization is not. For example, the argument, "All young girls wear skirts; Julie is a young

  Read more →
• 

  Algorithmic transparency

  Algorithmic transparency is the principle that the factors that influence the decisions made by algorithms should be visible, or transparent, to the people who use, regulate, and are affected by systems that employ those algorithms. Although the phrase was coined in 2016 by Nicholas Diakopoulos and Michael Koliska about the role of algorithms in deciding the content of digital journalism services, the underlying principle dates back to the 1970s and the rise of automated systems for scoring consumer credit. The phrases "algorithmic transparency" and "algorithmic accountability" are sometimes used interchangeably – especially since they were coined by the same people – but they have subtly different meanings. Specifically, "algorithmic transparency" states that the inputs to the algorithm and the algorithm's use itself must be known, but they need not be fair. "Algorithmic accountability" implies that the organizations that use algorithms must be accountable for the decisions made by those algorithms, even though the decisions are being made by a machine, and not by a human being. Current research around algorithmic transparency interested in both societal effects of accessing remote services running algorithms, as well as mathematical and computer science approaches that can be used to achieve algorithmic transparency. In the United States, the Federal Trade Commission's Bureau of Consumer Protection studies how algorithms are used by consumers by conducting its own research on algorithmic transparency and by funding external research. In the European Union, the data protection laws that came into effect in May 2018 include a "right to explanation" of decisions made by algorithms, though it is unclear what this means. Furthermore, the European Union founded The European Center for Algorithmic Transparency (ECAT).

  Read more →
• 

  Enterprise data planning

  Enterprise data planning is the starting point for enterprise wide change. It states the destination and describes how you will get there. It defines benefits, costs and potential risks. It provides measures to be used along the way to judge progress and adjust the journey according to changing circumstances. Data is fundamental to investment enterprises. Effective, economic management of data underpins operations and enables transformations needed to satisfy customer demands, competition and regulation. Data warehouse(s) and other aspects of the overall data architecture are critical to the enterprise. EDMworks has created a strategic data planning approach for the Investment Sector. It consists of a planning process, planning intranets, templates and training materials. EDMworks planning process is based on the belief that extensive domain knowledge significantly shortens planning iterations and enables progressively higher quality plans to be produced and implemented. This approach drives the development of an effective and economic enterprise data architecture. Enterprise data planning is based on proven business disciplines. Key architectural layers for data and applications are then added in order to provide an enterprise wide understanding of the uses and interdependencies of data. This enables the definition of the core components of the EDM plan: Industry structure and business objectives Assessment of systems and services Target architecture for applications, data and infrastructure Target organization structures Systems, database, infrastructure and organizational plans Business case, costs, benefits, results and risks. EDMworks uses several components from the Open Systems Group TOGAF enterprise systems planning process. TOGAF acts as an extension to good business planning methods to provide a framework for the development of the systems and data architectural components. == History == James Martin was one of the pathfinders in data planning methodologies. He was one of the first to identify data as being an enterprise wide asset that required management. He developed a series of tools and methods to support that process. Most of the large consulting firms developed their own methods to address the same basic issue. Frequently, their approaches were incorporated into their own branded system development methodologies that encompassed the complete systems development life-cycle. Others, such as Ed Tozer, developed more focused offerings that dealt with the complexities of extracting key business needs from senior management and then defining relevant architectural visions for the specific enterprise. From these various sources, the concepts of Business, Data, Applications and Technology Architectures emerged. The Open Group Architectural Framework (TOGAF) has taken this work forward and has established a sound method in TOGAF version 9. EDMworks approach is to adopt these planning and architectural practices as a basis and then add two additional dimensions to the planning and implementation focus: Domain knowledge of the Investments sector. Investments is a complex global industry with a common set of characteristics about clients, information vendors, competition and regulation. Domain knowledge significantly improves the quality of the planning and implementation processes Development of people and teams. Change is a major feature of in any Enterprise Data Management program and people and teams both need development in order to make EDM effective throughout an organization.

  Read more →
• 

  Transliteracy

  Transliteracy is "a fluidity of movement across a range of technologies, media and contexts". It is an ability to use diverse techniques to collaborate across different social groups. Transliteracy combines a range of capabilities required to move across a range of contexts, media, technologies and genres. Conceptually, transliteracy is situated across five capabilities: information capabilities (see information literacy), ICT (information and communication technologies), communication and collaboration, creativity and critical thinking. It is underpinned by literacy and numeracy. (See figure below) The concept of transliteracy is impacting the system of education and libraries. == History == While the term appears to come from the prefix trans- ('across') and the word literacy, the scholars who coined it say they developed it from the practice of transliteration, which means to use the letters of one language to write down a different language. The study of transliteracy was first developed in 2005 by the Transliteracies Research Project, directed by University of California at Santa Barbara Professor Alan Liu. The concept of 'transliteracies' was developed as part of research into online reading. It was shared and refined at the Transliteracies conference, held at UC Santa Barbara in 2005. The conference inspired the at the time De Montfort University Professor, Sue Thomas, to create the Production in Research and Transliteracy (PART) group, which evolved into the Transliteracy Research Group. The current meaning of transliteracy was defined in the group's seminal paper Transliteracy: crossing divides as "the ability to read, write, and interact across a range of platforms, tools, and media from signing and orality through handwriting, print, TV, radio, and film, to digital social networks." The concept was enthusiastically adopted by a number of professional groups, notably in the library and information field. Transliteracy Research Group Archive 2006–2013 curates numerous resources from this period. For a number of years, there was a gap between significant interest in transliteracy among professional groups and the scarcity of research. A group of academics from the University of Bordeaux considered transliteracy mainly in the school context. Freelance writer and consultant, Sue Thomas, studied transliteracy and creativity, while Suzana Sukovic, executive director of educational research and evidence-based practice at HETI, researched transliteracy in relation to digital storytelling. The first book on the topic, Transliteracy in complex information environment by Sukovic, is based on research and experience with practice-based projects. == Transliteracy in education == Transliteracy is making an impact on the classroom setting because of how technologically advanced younger generations are today. In 2012, Adam Marcus, a teacher and librarian at the New York City Department of Education (NYCDOE), decided to incorporate transliteracy into his school's public library summer reading program. He had a desire to enhance the experience of reading for his students by allowing them to connect to the text differently by using social media. He used a tool called VoiceThread in order to have his students "take part in conversations, formulate ideas, and share higher-order thinking through a variety of media channels: video, audio, text, images, and music". Students were also enabled to communicate with the book's author through blogs and websites, and were given multiple modes of media to comprehend and engage with the text on a deeper level. Some of these examples include an audio-video glossary and web links that aimed to bring the details of the text to life. The results of his experiment were deemed to have a positive effect on the program as students responded well to this interactive experience they were given. Marcus believes that it is important for educators and librarians to enhance storytelling for children by providing them with a modern and transliterate experience that one could not receive back then. The Agence nationale de la recherche funded a program at a French high school from 2013 to 2015, where the transliteracy skills of students were tested and observed. Students were placed in groups of three or four members and were required to use all sorts of media and tools in order to collect data for their projects. They were not allowed to only use digital sources, and were advised to use a diversity of sources. The focus of this experiment was to observe "the possible diversity of media and tools employed, on the ways of and reasons for switching from one to another, on how these different media and tools are distributed within contexts, according to the academic requirements and tasks individually and collectively performed by the students." The conclusions of the experiment dealt with physical space and organization being an issue for students and teachers to deal with. Spatially, it was challenging for students to navigate through different mediums when their space inside the classroom was limited. It was noticed that students were prone to use something that took up less space, rather than focusing on expanding their diversity of sources. Organizationally, it was challenging for students to organize all of the information they collected since everything was not being search and collected for digitally. In addition, students were not allotted a lot of time to complete their projects which also impacted their final product. == Transliteracy in libraries == In 2009, Dr. Susie Andretta, senior lecturer in Information Management at London Metropolitan University, conducted interviews with four different information professionals including an academic librarian, an outreach librarian, a content manager, and a scholar within the library science and information discipline. She was aiming to explore how transliteracy was colliding and combining with the print-world of libraries. Dr. Andretta defines transliteracy as "an umbrella term encompassing different literacies and multiple communication channels that require active participation with and across a range of platforms, and embracing both linear and non-linear messages (3)." The goals of these interviews ranged from the following: to test the information professional's awareness of transliteracy, to have them identify transliteracy and how it is integrated into their work, and to explain the impact transliteracy has had on they library they work at. Andretta found that out of all the information professionals interviewed, it was only the academic librarian who was vaguely familiar with the concept of transliteracy. Bernadette Daly Swanson, an Academic Librarian at UC Davis, expresses in her interview with Dr. Andretta how she would "like to think that the transliterate library is more of an environment where we do different things [...] I would take maybe about a third of the first floor of our library and transform it into a lab [...] where we can start to evolve [..] explore, and experiment in media development, content development, and do it not just with librarians; so open up the space for other people [...] so you don't get people working in isolation." Although the other three candidates that Dr. Andretta interviewed had not heard of the term transliteracy, they responded well to the concept once it was explained to them and agreed with its impact on the workplace. Dr. Michael Stephens, an assistant professor in the Graduate School of Library and Information Science at Dominican University, explains in his interview how the term transliteracy describes the courses he teaches on libraries and Web 2.0 technologies. Dr. Stephens states that students being educated in Web 2.0 technologies gives them "the opportunity to experience what the channel can be and the potential for that sharing learning, for asking questions, just for out loud thinking – I think it's incredibly valuable. [..] this is where this wonderful concept comes in, it was teaching them transliteracy and the fact that they can move across channels without getting worried about it." Dr. Andretta concluded from her interviews how although transliteracy may not be a very well-known term yet, it has nonetheless established itself into the intuition of libraries while also transforming the traditional library to a world of enhanced and expanded services. "Inherent in this transition are the challenges of having to adapt to a constantly changing technological landscape, the multiple literacies that this generates, and the need to establish a multifaceted library profession that can speak the multiple-media languages of its diverse users." Thomas Ipri, a librarian at the University of Nevada, advocates for libraries needing to make a change in their literary functions. He argues that the divide between digital and print makes it harder for libraries to accommodate their patrons and to share information. He f

  Read more →
• 

  Semantic decomposition (natural language processing)

  A semantic decomposition is an algorithm that breaks down the meanings of phrases or concepts into less complex concepts. The result of a semantic decomposition is a representation of meaning. This representation can be used for tasks, such as those related to artificial intelligence or machine learning. Semantic decomposition is common in natural language processing applications. The basic idea of a semantic decomposition is taken from the learning skills of adult humans, where words are explained using other words. It is based on Meaning-text theory. Meaning-text theory is used as a theoretical linguistic framework to describe the meaning of concepts with other concepts. == Background == Given that an AI does not inherently have language, it is unable to think about the meanings behind the words of a language. An artificial notion of meaning needs to be created for a strong AI to emerge. Creating an artificial representation of meaning requires the analysis of what meaning is. Many terms are associated with meaning, including semantics, pragmatics, knowledge and understanding or word sense. Each term describes a particular aspect of meaning, and contributes to a multitude of theories explaining what meaning is. These theories need to be analyzed further to develop an artificial notion of meaning best fit for our current state of knowledge. == Graph representations == Representing meaning as a graph is one of the two ways that both an AI cognition and a linguistic researcher think about meaning (connectionist view). Logicians utilize a formal representation of meaning to build upon the idea of symbolic representation, whereas description logics describe languages and the meaning of symbols. This contention between 'neat' and 'scruffy' techniques has been discussed since the 1970s. Research has so far identified semantic measures and with that word-sense disambiguation (WSD) - the differentiation of meaning of words - as the main problem of language understanding. As an AI-complete environment, WSD is a core problem of natural language understanding. AI approaches that use knowledge-given reasoning creates a notion of meaning combining the state of the art knowledge of natural meaning with the symbolic and connectionist formalization of meaning for AI. The abstract approach is shown in Figure. First, a connectionist knowledge representation is created as a semantic network consisting of concepts and their relations to serve as the basis for the representation of meaning. This graph is built out of different knowledge sources like WordNet, Wiktionary, and BabelNET. The graph is created by lexical decomposition that recursively breaks each concept semantically down into a set of semantic primes. The primes are taken from the theory of Natural Semantic Metalanguage, which has been analyzed for usefulness in formal languages. Upon this graph marker passing is used to create the dynamic part of meaning representing thoughts. The marker passing algorithm, where symbolic information is passed along relations form one concept to another, uses node and edge interpretation to guide its markers. The node and edge interpretation model is the symbolic influence of certain concepts. Future work uses the created representation of meaning to build heuristics and evaluate them through capability matching and agent planning, chatbots or other applications of natural language understanding.

  Read more →
• 

  Semantic translation

  Semantic translation is the process of using semantic information to aid in the translation of data in one representation or data model to another representation or data model. Semantic translation takes advantage of semantics that associate meaning with individual data elements in one dictionary to create an equivalent meaning in a second system. An example of semantic translation is the conversion of XML data from one data model to a second data model using formal ontologies for each system such as the Web Ontology Language (OWL). This is frequently required by intelligent agents that wish to perform searches on remote computer systems that use different data models to store their data elements. The process of allowing a single user to search multiple systems with a single search request is also known as federated search. Semantic translation should be differentiated from data mapping tools that do simple one-to-one translation of data from one system to another without actually associating meaning with each data element. Semantic translation requires that data elements in the source and destination systems have "semantic mappings" to a central registry or registries of data elements. The simplest mapping is of course where there is equivalence. There are three types of Semantic equivalence: Class Equivalence - indicating that class or "concepts" are equivalent. For example: "Person" is the same as "Individual" Property Equivalence - indicating that two properties are equivalent. For example: "PersonGivenName" is the same as "FirstName" Instance Equivalence - indicating that two individual instances of objects are equivalent. For example: "Dan Smith" is the same person as "Daniel Smith" Semantic translation is very difficult if the terms in a particular data model do not have direct one-to-one mappings to data elements in a foreign data model. In that situation, an alternative approach must be used to find mappings from the original data to the foreign data elements. This problem can be alleviated by centralized metadata registries that use the ISO-11179 standards such as the National Information Exchange Model (NIEM).

  Read more →
• 

  Gutmann method

  The Gutmann method is an algorithm for securely erasing the contents of computer hard disk drives, such as files. Devised by Peter Gutmann and Colin Plumb and presented in the paper Secure Deletion of Data from Magnetic and Solid-State Memory in July 1996, it involved writing a series of 35 patterns over the region to be erased. The selection of patterns assumes that the user does not know the encoding mechanism used by the drive, so it includes patterns designed specifically for three types of drives. A user who knows which type of encoding the drive uses can choose only those patterns intended for their drive. A drive with a different encoding mechanism would need different patterns. Most of the patterns in the Gutmann method were designed for older MFM/RLL-encoded disks. Gutmann himself has noted that more modern drives no longer use these older encoding techniques, making parts of the method irrelevant. He said "In the time since this paper was published, some people have treated the 35-pass overwrite technique described in it more as a kind of voodoo incantation to banish evil spirits than the result of a technical analysis of drive encoding techniques". Since about 2001, some ATA IDE and SATA hard drive manufacturer designs include support for the ATA Secure Erase standard, obviating the need to apply the Gutmann method when erasing an entire drive. The Gutmann method does not apply to USB sticks: a 2011 study reports that 71.7% of data remained available. On solid state drives it resulted in 0.8–4.3% recovery. == Background == The delete function in most operating systems simply marks the space occupied by the file as reusable (removes the pointer to the file) without immediately removing any of its contents. At this point the file can be fairly easily recovered by numerous recovery applications. However, once the space is overwritten with other data, there is no known way to use software to recover it. It cannot be done with software alone since the storage device only returns its current contents via its normal interface. Gutmann claims that intelligence agencies have sophisticated tools, including magnetic force microscopes, which together with image analysis, can detect the previous values of bits on the affected area of the media (for example hard disk). This claim however seems to be invalid based on the thesis "Data Reconstruction from a Hard Disk Drive using Magnetic Force Microscopy". == Method == An overwrite session consists of a lead-in of four random write patterns, followed by patterns 5 to 31 (see rows of table below), executed in a random order, and a lead-out of four more random patterns. Each of patterns 5 to 31 was designed with a specific magnetic media encoding scheme in mind, which each pattern targets. The drive is written to for all the passes even though the table below only shows the bit patterns for the passes that are specifically targeted at each encoding scheme. The result should obscure any data on the drive so that only the most advanced physical scanning (e.g., using a magnetic force microscope) of the drive is likely to be able to recover any data. The series of patterns is as follows: Encoded bits shown in bold are what should be present in the ideal pattern, although due to the encoding the complementary bit is actually present at the start of the track. == Criticism == Daniel Feenberg of the National Bureau of Economic Research, an American private nonprofit research organization, criticized Gutmann's claim that intelligence agencies are likely to be able to read overwritten data, citing a lack of evidence for such claims. He finds that Gutmann cites one non-existent source and sources that do not actually demonstrate recovery, only partially-successful observations. The definition of "random" is also quite different from the usual one used: Gutmann expects the use of pseudorandom data with sequences known to the recovering side, not an unpredictable one such as a cryptographically secure pseudorandom number generator. Nevertheless, some published government security procedures consider an overwritten disk to still be sensitive. Human factors and potential limitations in the overwriting software create a residual risk that is not considered acceptable at the highest security levels. Gutmann himself has responded to some of these criticisms and also criticized how his algorithm has been abused in an epilogue to his original paper, in which he states: In the time since this paper was published, some people have treated the 35-pass overwrite technique described in it more as a kind of voodoo incantation to banish evil spirits than the result of a technical analysis of drive encoding techniques. As a result, they advocate applying the voodoo to PRML and EPRML drives even though it will have no more effect than a simple scrubbing with random data. In fact performing the full 35-pass overwrite is pointless for any drive since it targets a blend of scenarios involving all types of (normally-used) encoding technology, which covers everything back to 30+-year-old MFM methods (if you don't understand that statement, re-read the paper). If you're using a drive which uses encoding technology X, you only need to perform the passes specific to X, and you never need to perform all 35 passes. For any modern PRML/EPRML drive, a few passes of random scrubbing is the best you can do. As the paper says, "A good scrubbing with random data will do about as well as can be expected". This was true in 1996, and is still true now. Gutmann's statement has been criticized for not recognizing that PRML/EPRML does not replace RLL, with critics claiming PRML/EPRML to be a signal detection method rather than a data encoding method. Polish data recovery service Kaleron has also claimed that Gutmann's publication contains further factual errors and assumptions that do not apply to actual disks.

  Read more →
• 

  Semantic heterogeneity

  Semantic heterogeneity is when database schema or datasets for the same domain are developed by independent parties, resulting in differences in meaning and interpretation of data values. Beyond structured data, the problem of semantic heterogeneity is compounded due to the flexibility of semi-structured data and various tagging methods applied to documents or unstructured data. Semantic heterogeneity is one of the more important sources of differences in heterogeneous datasets. Yet, for multiple data sources to interoperate with one another, it is essential to reconcile these semantic differences. Decomposing the various sources of semantic heterogeneities provides a basis for understanding how to map and transform data to overcome these differences. == Classification == One of the first known classification schemes applied to data semantics is from William Kent in the late 80s. Kent's approach dealt more with structural mapping issues than differences in meaning, which he pointed to data dictionaries as potentially solving. One of the most comprehensive classifications is from Pluempitiwiriyawej and Hammer, "Classification Scheme for Semantic and Schematic Heterogeneities in XML Data Sources". They classify heterogeneities into three broad classes: Structural conflicts arise when the schema of the sources representing related or overlapping data exhibit discrepancies. Structural conflicts can be detected when comparing the underlying schema. The class of structural conflicts includes generalization conflicts, aggregation conflicts, internal path discrepancy, missing items, element ordering, constraint and type mismatch, and naming conflicts between the element types and attribute names. Domain conflicts arise when the semantics of the data sources that will be integrated exhibit discrepancies. Domain conflicts can be detected by looking at the information contained in the schema and using knowledge about the underlying data domains. The class of domain conflicts includes schematic discrepancy, scale or unit, precision, and data representation conflicts. Data conflicts refer to discrepancies among similar or related data values across multiple sources. Data conflicts can only be detected by comparing the underlying sources. The class of data conflicts includes ID-value, missing data, incorrect spelling, and naming conflicts between the element contents and the attribute values. Moreover, mismatches or conflicts can occur between set elements (a "population" mismatch) or attributes (a "description" mismatch). Michael Bergman expanded upon this schema by adding a fourth major explicit category of language, and also added some examples of each kind of semantic heterogeneity, resulting in about 40 distinct potential categories . This table shows the combined 40 possible sources of semantic heterogeneities across sources: A different approach toward classifying semantics and integration approaches is taken by Sheth et al. Under their concept, they split semantics into three forms: implicit, formal and powerful. Implicit semantics are what is either largely present or can easily be extracted; formal languages, though relatively scarce, occur in the form of ontologies or other description logics; and powerful (soft) semantics are fuzzy and not limited to rigid set-based assignments. Sheth et al.'s main point is that first-order logic (FOL) or description logic is inadequate alone to properly capture the needed semantics. == Relevant applications == Besides data interoperability, relevant areas in information technology that depend on reconciling semantic heterogeneities include data mapping, semantic integration, and enterprise information integration, among many others. From the conceptual to actual data, there are differences in perspective, vocabularies, measures and conventions once any two data sources are brought together. Explicit attention to these semantic heterogeneities is one means to get the information to integrate or interoperate. A mere twenty years ago, information technology systems expressed and stored data in a multitude of formats and systems. The Internet and Web protocols have done much to overcome these sources of differences. While there is a large number of categories of semantic heterogeneity, these categories are also patterned and can be anticipated and corrected. These patterned sources inform what kind of work must be done to overcome semantic differences where they still reside.

  Read more →
• 

  Image stitching

  Image stitching or photo stitching is the process of combining multiple photographic images with overlapping fields of view to produce a segmented panorama or high-resolution image. Commonly performed through the use of computer software, most approaches to image stitching require nearly exact overlaps between images and identical exposures to produce seamless results, although some stitching algorithms actually benefit from differently exposed images by doing high-dynamic-range imaging in regions of overlap. Some digital cameras can stitch their photos internally. == Applications == Image stitching is widely used in modern applications, such as the following: Document mosaicing Image stabilization feature in camcorders that use frame-rate image alignment High-resolution image mosaics in digital maps and satellite imagery Medical imaging Multiple-image super-resolution imaging Video stitching Object insertion == Process == The image stitching process can be divided into three main components: image registration, calibration, and blending. === Image stitching algorithms === In order to estimate image alignment, algorithms are needed to determine the appropriate mathematical model relating pixel coordinates in one image to pixel coordinates in another. Algorithms that combine direct pixel-to-pixel comparisons with gradient descent (and other optimization techniques) can be used to estimate these parameters. Distinctive features can be found in each image and then efficiently matched to rapidly establish correspondences between pairs of images. When multiple images exist in a panorama, techniques have been developed to compute a globally consistent set of alignments and to efficiently discover which images overlap one another. A final compositing surface onto which to warp or projectively transform and place all of the aligned images is needed, as are algorithms to seamlessly blend the overlapping images, even in the presence of parallax, lens distortion, scene motion, and exposure differences. === Image stitching issues === Since the illumination in two views cannot be guaranteed to be identical, stitching two images could create a visible seam. Other reasons for seams could be the background changing between two images for the same continuous foreground. Other major issues to deal with are the presence of parallax, lens distortion, scene motion, and exposure differences. In a non-ideal real-life case, the intensity varies across the whole scene, and so does the contrast and intensity across frames. Additionally, the aspect ratio of a panorama image needs to be taken into account to create a visually pleasing composite. For panoramic stitching, the ideal set of images will have a reasonable amount of overlap (at least 15–30%) to overcome lens distortion and have enough detectable features. The set of images will have consistent exposure between frames to minimize the probability of seams occurring. === Keypoint detection === Feature detection is necessary to automatically find correspondences between images. Robust correspondences are required in order to estimate the necessary transformation to align an image with the image it is being composited on. Corners, blobs, Harris corners, and differences of Gaussians of Harris corners are good features since they are repeatable and distinct. One of the first operators for interest point detection was developed by Hans Moravec in 1977 for his research involving the automatic navigation of a robot through a clustered environment. Moravec also defined the concept of "points of interest" in an image and concluded these interest points could be used to find matching regions in different images. The Moravec operator is considered to be a corner detector because it defines interest points as points where there are large intensity variations in all directions. This often is the case at corners. However, Moravec was not specifically interested in finding corners, just distinct regions in an image that could be used to register consecutive image frames. Harris and Stephens improved upon Moravec's corner detector by considering the differential of the corner score with respect to direction directly. They needed it as a processing step to build interpretations of a robot's environment based on image sequences. Like Moravec, they needed a method to match corresponding points in consecutive image frames, but were interested in tracking both corners and edges between frames. SIFT and SURF are recent key-point or interest point detector algorithms but a point to note is that SURF is patented and its commercial usage restricted. Once a feature has been detected, a descriptor method like SIFT descriptor can be applied to later match them. === Registration === Image registration involves matching features in a set of images or using direct alignment methods to search for image alignments that minimize the sum of absolute differences between overlapping pixels. When using direct alignment methods one might first calibrate one's images to get better results. Additionally, users may input a rough model of the panorama to help the feature matching stage, so that e.g. only neighboring images are searched for matching features. Since there are smaller group of features for matching, the result of the search is more accurate and execution of the comparison is faster. To estimate a robust model from the data, a common method used is known as RANSAC. The name RANSAC is an abbreviation for "RANdom SAmple Consensus". It is an iterative method for robust parameter estimation to fit mathematical models from sets of observed data points which may contain outliers. The algorithm is non-deterministic in the sense that it produces a reasonable result only with a certain probability, with this probability increasing as more iterations are performed. It being a probabilistic method means that different results will be obtained for every time the algorithm is run. The RANSAC algorithm has found many applications in computer vision, including the simultaneous solving of the correspondence problem and the estimation of the fundamental matrix related to a pair of stereo cameras. The basic assumption of the method is that the data consists of "inliers", i.e., data whose distribution can be explained by some mathematical model, and "outliers" which are data that do not fit the model. Outliers are considered points which come from noise, erroneous measurements, or simply incorrect data. For the problem of homography estimation, RANSAC works by trying to fit several models using some of the point pairs and then checking if the models were able to relate most of the points. The best model – the homography, which produces the highest number of correct matches – is then chosen as the answer for the problem; thus, if the ratio of number of outliers to data points is very low, the RANSAC outputs a decent model fitting the data. === Calibration === Image calibration aims to minimize differences between an ideal lens models and the camera-lens combination that was used, optical defects such as distortions, exposure differences between images, vignetting, camera response and chromatic aberrations. If feature detection methods were used to register images and absolute positions of the features were recorded and saved, stitching software may use the data for geometric optimization of the images in addition to placing the images on the panosphere. Panotools and its various derivative programs use this method. ==== Alignment ==== Alignment may be necessary to transform an image to match the view point of the image it is being composited with. Alignment, in simple terms, is a change in the coordinates system so that it adopts a new coordinate system which outputs image matching the required viewpoint. The types of transformations an image may go through are pure translation, pure rotation, a similarity transform which includes translation, rotation and scaling of the image which needs to be transformed, Affine or projective transform. Projective transformation is the farthest an image can transform (in the set of two dimensional planar transformations), where only visible features that are preserved in the transformed image are straight lines whereas parallelism is maintained in an affine transform. Projective transformation can be mathematically described as x ′ = H ⋅ x , {\displaystyle x'=H\cdot x,} where x {\displaystyle x} is points in the old coordinate system, x ′ {\displaystyle x'} is the corresponding points in the transformed image and H {\displaystyle H} is the homography matrix. Expressing the points x {\displaystyle x} and x ′ {\displaystyle x'} using the camera intrinsics ( K {\displaystyle K} and K ′ {\displaystyle K'} ) and its rotation and translation [ R t ] {\displaystyle [R\,t]} to the real-world coordinates X {\displaystyle X} and < m a t h > x {\displaystyle $x\}\; and\; x\; \prime \; \{\backslash displaystyle\; x\text{'}\}\; \text{'}$, we get Using the abo

  Read more →
• 

  BuildingSMART Data Dictionary

  buildingSMART Data Dictionary (bSDD) is a service provided by buildingSMART which offers free data dictionaries for the international standardization of construction planning. The structure of bSDD was defined by the Nonprofit organization Buildingsmart and is used to describe objects and their attributes in a BIM process. == Aim == The aim of bSDD is to enable architects and planners to exchange and share building data across different specialists and language boundaries and thus avoid misunderstandings caused by different interpretations of terms. The bSDD standard extends the more general IFC. Software developers can access and use the dictionaries. In May 2025 over 300 dictionaries are available, including IFC, extensions to it such as Airport Domain IFC extension module or classification systems like Uniclass. == Structure == The main structural parts of bSDD are: Dictionary: A dictionary is a collection of classes: Class: A class describes the various object types, such as Bag drop or Baggage conveyor in airport planning. A class contains properties: Property: A property describes a part of a class, e.g. color or weight. Related properties are organized in a group: GroupOfProperties: A group organizes related properties, e.g. environmental properties or electrical properties. == Creating and managing a directory == Every dictionary in bSDD must be published in the name of a registered organization. As soon as the content is activated, it receives an unchangeable URI. This means that the content remains permanently in bSDD and cannot be deleted - this ensures stable use of the dictionary. It is only possible to change the status to inactive if it is no longer to be used - however, the dictionary remains permanently.

  Read more →
• 

  Algorithmic paradigm

  An algorithmic paradigm or algorithm design paradigm is a generic model or framework which underlies the design of a class of algorithms. An algorithmic paradigm is an abstraction higher than the notion of an algorithm, just as an algorithm is an abstraction higher than a computer program. == List of well-known paradigms == === General === Backtracking Branch and bound Brute-force search Divide and conquer Dynamic programming Greedy algorithm Recursion Prune and search === Parameterized complexity === Kernelization Iterative compression === Computational geometry === Sweep line algorithms Rotating calipers Randomized incremental construction

  Read more →