AI Assistant Intellij

AI Assistant Intellij — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  ASR-complete

  ASR-complete is, by analogy to "NP-completeness" in complexity theory, a term to indicate that the difficulty of a computational problem is equivalent to solving the central automatic speech recognition problem, i.e. recognize and understanding spoken language. Unlike "NP-completeness", this term is typically used informally. Such problems are hypothesised to include: Spoken natural language understanding Understanding speech from far-field microphones, i.e. handling the reverbation and background noise These problems are easy for humans to do (in fact, they are described directly in terms of imitating humans). Some systems can solve very simple restricted versions of these problems, but none can solve them in their full generality.

  Read more →
• 

  Farthest-first traversal

  In computational geometry, the farthest-first traversal of a compact metric space is a sequence of points in the space, where the first point is selected arbitrarily and each successive point is as far as possible from the set of previously-selected points. The same concept can also be applied to a finite set of geometric points, by restricting the selected points to belong to the set or equivalently by considering the finite metric space generated by these points. For a finite metric space or finite set of geometric points, the resulting sequence forms a permutation of the points, also known as the greedy permutation. Every prefix of a farthest-first traversal provides a set of points that is widely spaced and close to all remaining points. More precisely, no other set of equally many points can be spaced more than twice as widely, and no other set of equally many points can be less than half as far to its farthest remaining point. In part because of these properties, farthest-point traversals have many applications, including the approximation of the traveling salesman problem and the metric k-center problem. They may be constructed in polynomial time, or (for low-dimensional Euclidean spaces) approximated in near-linear time. == Definition and properties == A farthest-first traversal is a sequence of points in a compact metric space, with each point appearing at most once. If the space is finite, each point appears exactly once, and the traversal is a permutation of all of the points in the space. The first point of the sequence may be any point in the space. Each point p after the first must have the maximum possible distance to the set of points earlier than p in the sequence, where the distance from a point to a set is defined as the minimum of the pairwise distances to points in the set. A given space may have many different farthest-first traversals, depending both on the choice of the first point in the sequence (which may be any point in the space) and on ties for the maximum distance among later choices. Farthest-point traversals may be characterized by the following properties. Fix a number k, and consider the prefix formed by the first k points of the farthest-first traversal of any metric space. Let r be the distance between the final point of the prefix and the other points in the prefix. Then this subset has the following two properties: All pairs of the selected points are at distance at least r from each other, and All points of the metric space are at distance at most r from the subset. Conversely any sequence having these properties, for all choices of k, must be a farthest-first traversal. These are the two defining properties of a Delone set, so each prefix of the farthest-first traversal forms a Delone set. == Applications == Rosenkrantz, Stearns & Lewis (1977) used the farthest-first traversal to define the farthest-insertion heuristic for the travelling salesman problem. This heuristic finds approximate solutions to the travelling salesman problem by building up a tour on a subset of points, adding one point at a time to the tour in the ordering given by a farthest-first traversal. To add each point to the tour, one edge of the previous tour is broken and replaced by a pair of edges through the added point, in the cheapest possible way. Although Rosenkrantz et al. prove only a logarithmic approximation ratio for this method, they show that in practice it often works better than other insertion methods with better provable approximation ratios. Later, the same sequence of points was popularized by Gonzalez (1985), who used it as part of greedy approximation algorithms for two problems in clustering, in which the goal is to partition a set of points into k clusters. One of the two problems that Gonzalez solve in this way seeks to minimize the maximum diameter of a cluster, while the other, known as the metric k-center problem, seeks to minimize the maximum radius, the distance from a chosen central point of a cluster to the farthest point from it in the same cluster. For instance, the k-center problem can be used to model the placement of fire stations within a city, in order to ensure that every address within the city can be reached quickly by a fire truck. For both clustering problems, Gonzalez chooses a set of k cluster centers by selecting the first k points of a farthest-first traversal, and then creates clusters by assigning each input point to the nearest cluster center. If r is the distance from the set of k selected centers to the next point at position k + 1 in the traversal, then with this clustering every point is within distance r of its center and every cluster has diameter at most 2r. However, the subset of k centers together with the next point are all at distance at least r from each other, and any k-clustering would put some two of these points into a single cluster, with one of them at distance at least r/2 from its center and with diameter at least r. Thus, Gonzalez's heuristic gives an approximation ratio of 2 for both clustering problems. Gonzalez's heuristic was independently rediscovered for the metric k-center problem by Dyer & Frieze (1985), who applied it more generally to weighted k-center problems. Another paper on the k-center problem from the same time, Hochbaum & Shmoys (1985), achieves the same approximation ratio of 2, but its techniques are different. Nevertheless, Gonzalez's heuristic, and the name "farthest-first traversal", are often incorrectly attributed to Hochbaum and Shmoys. For both the min-max diameter clustering problem and the metric k-center problem, these approximations are optimal: the existence of a polynomial-time heuristic with any constant approximation ratio less than 2 would imply that P = NP. As well as for clustering, the farthest-first traversal can also be used in another type of facility location problem, the max-min facility dispersion problem, in which the goal is to choose the locations of k different facilities so that they are as far apart from each other as possible. More precisely, the goal in this problem is to choose k points from a given metric space or a given set of candidate points, in such a way as to maximize the minimum pairwise distance between the selected points. Again, this can be approximated by choosing the first k points of a farthest-first traversal. If r denotes the distance of the kth point from all previous points, then every point of the metric space or the candidate set is within distance r of the first k − 1 points. By the pigeonhole principle, some two points of the optimal solution (whatever it is) must both be within distance r of the same point among these first k − 1 chosen points, and (by the triangle inequality) within distance 2r of each other. Therefore, the heuristic solution given by the farthest-first traversal is within a factor of two of optimal. Other applications of the farthest-first traversal include color quantization (clustering the colors in an image to a smaller set of representative colors), progressive scanning of images (choosing an order to display the pixels of an image so that prefixes of the ordering produce good lower-resolution versions of the whole image rather than filling in the image from top to bottom), point selection in the probabilistic roadmap method for motion planning, simplification of point clouds, generating masks for halftone images, hierarchical clustering, finding the similarities between polygon meshes of similar surfaces, choosing diverse and high-value observation targets for underwater robot exploration, fault detection in sensor networks, modeling phylogenetic diversity, matching vehicles in a heterogenous fleet to customer delivery requests, uniform distribution of geodetic observatories on the Earth's surface or of other types of sensor network, generation of virtual point lights in the instant radiosity computer graphics rendering method, and geometric range searching data structures. == Algorithms == === Greedy exact algorithm === The farthest-first traversal of a finite point set may be computed by a greedy algorithm that maintains the distance of each point from the previously selected points, performing the following steps: Initialize the sequence of selected points to the empty sequence, and the distances of each point to the selected points to infinity. While not all points have been selected, repeat the following steps: Scan the list of not-yet-selected points to find a point p that has the maximum distance from the selected points. Remove p from the not-yet-selected points and add it to the end of the sequence of selected points. For each remaining not-yet-selected point q, replace the distance stored for q by the minimum of its old value and the distance from p to q. For a set of n points, this algorithm takes O(n2) steps and O(n2) distance computations. === Approximations === A faster approximation algorithm, given by Har-Peled & Mendel (2006), applie

  Read more →
• 

  Hinge loss

  In machine learning, the hinge loss is a loss function used for training classifiers. The hinge loss is used for "maximum-margin" classification, most notably for support vector machines (SVMs). For an intended output t = ±1 and a classifier score y, the hinge loss of the prediction y is defined as ℓ ( y ) = max ( 0 , 1 − t ⋅ y ) {\displaystyle \ell (y)=\max(0,1-t\cdot y)} Note that y {\displaystyle y} should be the "raw" output of the classifier's decision function, not the predicted class label. For instance, in linear SVMs, y = w ⋅ x + b {\displaystyle y=\mathbf {w} \cdot \mathbf {x} +b} , where ( w , b ) {\displaystyle (\mathbf {w} ,b)} are the parameters of the hyperplane and x {\displaystyle \mathbf {x} } is the input variable(s). When t and y have the same sign (meaning y predicts the right class) and | y | ≥ 1 {\displaystyle |y|\geq 1} , the hinge loss ℓ ( y ) = 0 {\displaystyle \ell (y)=0} . When they have opposite signs, ℓ ( y ) {\displaystyle \ell (y)} increases linearly with y, and similarly if | y | < 1 {\displaystyle |y|<1} , even if it has the same sign (correct prediction, but not by enough margin). The Hinge loss is not a proper scoring rule. == Extensions == While binary SVMs are commonly extended to multiclass classification in a one-vs.-all or one-vs.-one fashion, it is also possible to extend the hinge loss itself for such an end. Several different variations of multiclass hinge loss have been proposed. For example, Crammer and Singer defined it for a linear classifier as ℓ ( y ) = max ( 0 , 1 + max y ≠ t w y x − w t x ) {\displaystyle \ell (y)=\max(0,1+\max _{y\neq t}\mathbf {w} _{y}\mathbf {x} -\mathbf {w} _{t}\mathbf {x} )} , where t {\displaystyle t} is the target label, w t {\displaystyle \mathbf {w} _{t}} and w y {\displaystyle \mathbf {w} _{y}} are the model parameters. Weston and Watkins provided a similar definition, but with a sum rather than a max: ℓ ( y ) = ∑ y ≠ t max ( 0 , 1 + w y x − w t x ) {\displaystyle \ell (y)=\sum _{y\neq t}\max(0,1+\mathbf {w} _{y}\mathbf {x} -\mathbf {w} _{t}\mathbf {x} )} . In structured prediction, the hinge loss can be further extended to structured output spaces. Structured SVMs with margin rescaling use the following variant, where w denotes the SVM's parameters, y the SVM's predictions, φ the joint feature function, and Δ the Hamming loss: ℓ ( y ) = max ( 0 , Δ ( y , t ) + ⟨ w , ϕ ( x , y ) ⟩ − ⟨ w , ϕ ( x , t ) ⟩ ) = max ( 0 , max y ∈ Y ( Δ ( y , t ) + ⟨ w , ϕ ( x , y ) ⟩ ) − ⟨ w , ϕ ( x , t ) ⟩ ) {\displaystyle {\begin{aligned}\ell (\mathbf {y} )&=\max(0,\Delta (\mathbf {y} ,\mathbf {t} )+\langle \mathbf {w} ,\phi (\mathbf {x} ,\mathbf {y} )\rangle -\langle \mathbf {w} ,\phi (\mathbf {x} ,\mathbf {t} )\rangle )\\&=\max(0,\max _{y\in {\mathcal {Y}}}\left(\Delta (\mathbf {y} ,\mathbf {t} )+\langle \mathbf {w} ,\phi (\mathbf {x} ,\mathbf {y} )\rangle \right)-\langle \mathbf {w} ,\phi (\mathbf {x} ,\mathbf {t} )\rangle )\end{aligned}}} . == Optimization == The hinge loss is a convex function, so many of the usual convex optimizers used in machine learning can work with it. It is not differentiable, but has a subgradient with respect to model parameters w of a linear SVM with score function y = w ⋅ x {\displaystyle y=\mathbf {w} \cdot \mathbf {x} } that is given by ∂ ℓ ∂ w i = { − t ⋅ x i if t ⋅ y < 1 , 0 otherwise . {\displaystyle {\frac {\partial \ell }{\partial w_{i}}}={\begin{cases}-t\cdot x_{i}&{\text{if }}t\cdot y<1,\\0&{\text{otherwise}}.\end{cases}}} However, since the derivative of the hinge loss at t y = 1 {\displaystyle ty=1} is undefined, smoothed versions may be preferred for optimization, such as Rennie and Srebro's ℓ ( y ) = { 1 2 − t y if t y ≤ 0 , 1 2 ( 1 − t y ) 2 if 0 < t y < 1 , 0 if 1 ≤ t y {\displaystyle \ell (y)={\begin{cases}{\frac {1}{2}}-ty&{\text{if}}~~ty\leq 0,\\{\frac {1}{2}}(1-ty)^{2}&{\text{if}}~~0 Read more →

• 

  Receptron

  The receptron (short for "reservoir perceptron") is a neuromorphic data processing model — specifically neuromorphic computing — that generalizes the traditional perceptron, by incorporating non-linear interactions between inputs. Unlike classical perceptron, which rely on linearly independent weights, the receptron leverages complexity in physical substrates, such as the electric conduction properties of nanostructured materials or optical speckle fields, to perform classification tasks. The receptron bridges unconventional computing and neural network principles, enabling solutions that do not require the training approaches typical of artificial neural networks based on the perceptron model. == Algorithm == The receptron is an algorithm for supervised learning of binary classifiers, so a classification algorithm that makes its predictions based on a predictor function, combining a set of weights with the feature vector. The mathematical model is based on the sum of inputs with non-linear interactions: S = ∑ k = 1 n x j w ~ j ( x → ) | S ∈ R {\displaystyle S=\sum _{k=1}^{n}x_{j}{\widetilde {w}}_{j}({\vec {x}})|S\in R} (1) where j ∈ [ 1 , n ] {\displaystyle j\in [1,n]} and w ~ j {\displaystyle {\widetilde {w}}_{j}} are non-linear weight functions depending on the inputs, x → {\displaystyle {\vec {x}}} . Nonlinearity will typically make the system extremely complex, and allowing for the solution of problems not solvable through the simpler rules of a linear system, such as the perceptron or McCulloch Pitts neurons, which is based on the sum of linearly independent weights: S = ∑ k = 1 n x j w j p {\displaystyle S=\sum _{k=1}^{n}x_{j}w_{j}^{p}} (2) where w j {\displaystyle w_{j}} are constant real values. A consequence of this simplicity is the limitation to linearly separable functions, which necessitates multi-layer architectures and training algorithms like backpropagation As in the perceptron case, the summation in Eq. 1 origins the activation of the receptron output through the thresholding process, Y ( x 1 , . . . , x n ) = { 1 if S > th 0 if S ≤ th {\displaystyle Y(x_{1},...,x_{n})={\begin{cases}1&{\text{if }}S>{\text{th}}\\0&{\text{if }}S\leq {\text{th}}\end{cases}}} (3) where th is a constant threshold parameter. Equation 3 can be written by using the Heaviside step function. The weight functions w ~ ( x → ) {\displaystyle {\widetilde {w}}({\vec {x}})} can be written with a finite number of parameters w j 1 . . . j n {\displaystyle w_{j_{1}...j_{n}}} , simplifying the model representation. One can Taylor-expand w ~ ( x → ) {\displaystyle {\widetilde {w}}({\vec {x}})} and use the idempotency of Boolean variables ( x j ) q = x j ∀ q ≥ 1 {\displaystyle (x_{j})^{q}=x_{j}\forall q\geq 1} such that S ′ = b + ∑ k = 1 n x j w ~ j ( x → ) {\displaystyle S'=b+\sum _{k=1}^{n}x_{j}{\widetilde {w}}_{j}({\vec {x}})} can be written as S ′ ( x → ) = b + ∑ j w j x j + ∑ j < k w j k x j x k + ∑ j < k < l w j k l x j x k x l + . . . {\displaystyle S'({\vec {x}})=b+\sum _{j}w_{j}x_{j}+\sum _{j Read more →

• 

  INDIAai

  INDIAai is a web portal launched by the Government of India on 07 March 2024 for artificial intelligence-related developments in India. It is known as the National AI Portal of India, which was jointly started by the Ministry of Electronics and Information Technology (MeitY), the National e-Governance Division (NeGD) and the National Association of Software and Service Companies (NASSCOM) with support from the Department of School Education and Literacy (DoSE&L) and Ministry of Human Resource Development. == History == The portal was launched on 30 May 2020, by Ravi Shankar Prasad, the Union Minister for Electronics and IT, Law and Justice and Communications, on the first anniversary of the second tenure of Prime Minister Narendra Modi-led government. A national program for the youth, 'Responsible AI for Youth', was also launched on the same day. As of 2022, the website was visited by more than 4.5 lakh users with 1.2 million page views. It has 1151 articles on artificial intelligence, 701 news stories, 98 reports, 95 case studies and 213 videos on its portal. It maintains a database on AI ecosystem of India featuring 121 government initiatives and 281 startups. In May 2022, INDIAai released a book titled 'AI for Everyone' that covers the basics of AI. Cabinet chaired by the Prime Minister Narendra Modi has approved the comprehensive national-level IndiaAI mission with a budget outlay of Rs.10,371.92 crore. The Mission will be implemented by ‘IndiaAI’ Independent Business Division (IBD) under Digital India Corporation (DIC). == Objective and features == It aims to function as a one-stop portal for all AI-related development in India. The platform publishes resources such as articles, news, interviews, and investment funding news and events for AI startups, AI companies, and educational firms related to artificial intelligence in India. It also distributes documents, case studies, and research reports. Additionally, the platform provides education and employment opportunities related to AI. It offers AI courses, both free and paid.

  Read more →
• 

  Multidimensional analysis

  In statistics, econometrics and related fields, multidimensional analysis (MDA) is a data analysis process that groups data into two categories: data dimensions and measurements. For example, a data set consisting of the number of wins for a single football team at each of several years is a single-dimensional (in this case, longitudinal) data set. A data set consisting of the number of wins for several football teams in a single year is also a single-dimensional (in this case, cross-sectional) data set. A data set consisting of the number of wins for several football teams over several years is a two-dimensional data set. == Higher dimensions == In many disciplines, two-dimensional data sets are also called panel data. While, strictly speaking, two- and higher-dimensional data sets are "multi-dimensional", the term "multidimensional" tends to be applied only to data sets with three or more dimensions. For example, some forecast data sets provide forecasts for multiple target periods, conducted by multiple forecasters, and made at multiple horizons. The three dimensions provide more information than can be gleaned from two-dimensional panel data sets. == Software == Computer software for MDA include Online analytical processing (OLAP) for data in relational databases, pivot tables for data in spreadsheets, and Array DBMSs for general multi-dimensional data (such as raster data) in science, engineering, and business.

  Read more →
• 

  Andrej Mrvar

  Andrej Mrvar is a Slovenian computer scientist and a professor at the University of Ljubljana's Faculty of Social Sciences. He is known for his work in network analysis, graph drawing, decision making, virtual reality, timing and data processing of sports competitions. == Education and career == He is well known for his work on Pajek, a free software for analysis and visualization of large networks. Mrvar began work on Pajek in 1996 with Vladimir Batagelj. His book Exploratory Social Network Analysis with Pajek, coauthored with Wouter de Nooy and Vladimir Batagelj, is his most cited work. It was published by Cambridge University Press in three editions (first 2005, second 2011, and third 2018). The book was translated into Japanese (2009) and Chinese (first edition 2012, second 2014). With Anuška Ferligoj, he was a founding co-editor-in-chief of the Metodološki zvezki - Advances in Methodology and Statistics journal. == Awards and honors == Vidmar Award (Faculty of Electrical and Computer Engineering, University of Ljubljana): 1988, 1990 First prizes for contributions (with Vladimir Batagelj) to Graph Drawing Contests in years: 1995, 1996, 1997, 1998, 1999, 2000 and 2005 / Graph Drawing Hall of Fame. Award of University of Ljubljana for contributions in education and research (Svečana listina Univerze v Ljubljani za pomembne dosežke na področju vzgojnoizobraževalnega in znanstvenoraziskovalega dela): 2001 The INSNA's William D. Richards Software award for work on Pajek (with Vladimir Batagelj): 2013 Award of Faculty of Social Sciences, University of Ljubljana for scientific excellence (Priznanje za znanstveno odličnost): 2013 == Selected publications == Wouter de Nooy, Andrej Mrvar, Vladimir Batagelj, Mark Granovetter (Series Editor), Exploratory Social Network Analysis with Pajek (Structural Analysis in the Social Sciences), Cambridge University Press (First Edition: 2005, Second Edition: 2011, Third Edition: 2018 ). Japanese Translation (2010). Chinese Translation (First Edition: 2012, Second Edition: 2014) Andrej Mrvar and Vladimir Batagelj, Analysis and visualization of large networks with program package Pajek. Complex Adaptive Systems Modeling, 4:6. SpringerOpen, 2016 Vladimir Batagelj and Andrej Mrvar, Some Analyses of Erdős Collaboration Graph, Social Networks, 22, 173–186, 2000 Vladimir Batagelj and Andrej Mrvar, A Subquadratic Triad Census Algorithm for Large Sparse Networks with Small Maximum Degree. Social Networks, 23, 237–243, 2001 Patrick Doreian and Andrej Mrvar, A Partitioning Approach to Structural Balance, Social Networks, 18, 149–168, 1996 Patrick Doreian and Andrej Mrvar, Partitioning Signed Social Networks, Social Networks, 31, 1–11, 2009 Andrej Mrvar and Patrick Doreian, Partitioning Signed Two-Mode Networks, Journal of Mathematical Sociology, 33, 196–221, 2009 Patrick Doreian and Andrej Mrvar, The international reach of the Koch brothers network. In: Antonyuk, A. and Basov, N. (Eds.): Networks in the Global World V. NetGloW 2020. Lecture Notes in Networks and Systems, 181, 225–235. Springer, 2021 Patrick Doreian and Andrej Mrvar, Delineating Changes in the Fundamental Structure of Signed Networks, Frontiers in Physics, 294, 1–11, 2021 Patrick Doreian and Andrej Mrvar, Hubs and Authorities in the Koch Brothers Network. Social Networks, Social Networks, 64, 148–157, 2021 Patrick Doreian and Andrej Mrvar, Public issues, policy proposals, social movements, and the interests of the Koch Brothers network of allies, Quality and Quantity, 56, 305–322, 2022 Douglas R. White, Vladimir Batagelj, Andrej Mrvar, Analyzing Large Kinship and Marriage Networks with Pgraph and Pajek. Social Science Computer Review, 17, 245–274, 1999 Ion Georgiou, Ronald Concer, Andrej Mrvar, A Systemic Approach to Sociometric Group Research: Advancing The Work of Leslie Day Zeleny, 1939–1947, Social Networks, 63, 174–200, 2020

  Read more →
• 

  Moral graph

  In graph theory, a moral graph is used to find the equivalent undirected form of a directed acyclic graph. It is a key step of the junction tree algorithm, used in belief propagation on graphical models. The moralized counterpart of a directed acyclic graph is formed by adding edges between all pairs of non-adjacent nodes that have a common child, and then making all edges in the graph undirected. Equivalently, a moral graph of a directed acyclic graph G is an undirected graph in which each node of the original G is now connected to its Markov blanket. The name stems from the fact that, in a moral graph, two nodes that have a common child are required to be married by sharing an edge. Moralization may also be applied to mixed graphs, called in this context "chain graphs". In a chain graph, a connected component of the undirected subgraph is called a chain. Moralization adds an undirected edge between any two vertices that both have outgoing edges to the same chain, and then forgets the orientation of the directed edges of the graph. == Weakly recursively simplicial == A graph is weakly recursively simplicial if it has a simplicial vertex and the subgraph after removing a simplicial vertex and some edges (possibly none) between its neighbours is weakly recursively simplicial. A graph is moral if and only if it is weakly recursively simplicial. A chordal graph (a.k.a., recursive simplicial) is a special case of weakly recursively simplicial when no edge is removed during the elimination process. Therefore, a chordal graph is also moral. But a moral graph is not necessarily chordal. == Recognising moral graphs == Unlike chordal graphs that can be recognised in polynomial time, Verma & Pearl (1993) proved that deciding whether or not a graph is moral is NP-complete.

  Read more →
• 

  Amaq News Agency

  Amaq News Agency (Arabic: وكالة أعماق الإخبارية, romanized: Wakālat Aʻmāq al-Ikhbārīyah) is a news outlet linked to the Islamic State (IS). Amaq is often the "first point of publication for claims of responsibility" for terrorist attacks in Western countries by the Islamic State. In March 2019, Amaq News Agency was designated as a foreign terrorist organization by the United States Department of State. == History == Among the founders of Amaq was Syrian journalist Baraa Kadek, who joined IS in late 2013, Abu Muhammad al-Furqan, and seven others who originally worked for Halab News Network. According to The New York Times, it has a direct connection with IS, from which it "gets tips". Its name was taken from Amik Valley in Hatay Province, which is mentioned in a hadith as the site of an "apocalyptic victory over non-believers". Amaq News Agency was first noticed by SITE during the Siege of Kobanî (Syria) in 2014, when its updates were shared among IS fighters. It became more widely known after it began reporting claims of responsibility for terrorist attacks in Western countries, such as the 2015 San Bernardino attack, for which IS officially claimed responsibility the next day. An Amaq cameraman shot the first footage of the capture of Palmyra in 2015. Amaq launched an official mobile app in 2015 and has warned against unofficial versions that reportedly have been used to spy on its users. It also uses a Telegram account. It had a WordPress-based blog, but it was removed without explanation in April 2016. On 12 June 2016, IS claimed responsibility for the Pulse nightclub shooting through Amaq, without prior knowledge of the attack. The shooter, Omar Mateen had later pledged allegiance to IS via a phone call with emergency services. On 31 May 2017, a Facebook post announced Amaq's founder, Baraa Kadek AKA Rayan Meshaal, had been killed with his daughter by an American airstrike on Mayadin. The post was reportedly made by his younger brother. Reuters could not immediately verify this account. On 27 July 2017, the US confirmed that Kadek had been killed by a coalition airstrike near Mayadin between 25 and 27 May 2017. In June 2017, German police arrested a 23-year-old Syrian man identified only as Mohammed G., accusing him of communicating with the alleged perpetrator of the 2016 Malmö Muslim community centre arson in order to report to Amaq. On 21 March 2019, the U.S. Department of State officially deemed Amaq an alias of IS, and thus a Foreign Terrorist Organization. On 22 March 2024, the Islamic State claimed responsibility for the Crocus City Hall attack through Amaq, U.S. officials confirmed the claim shortly after. A day after the attack, Amaq published a video of the attack, filmed by one of the attackers. It showed the attackers shooting victims and slitting the throat of another, while the filming attacker praises Allah and speaks against infidels. == Character == Amaq publishes a stream of short news reports, both text and video, on the mobile app Telegram. The reports take on the trappings of mainstream journalism, with "Breaking News" headings, and embedded reporters at the scenes of IS battles. The reports try to appear neutral, toning down the jihadist language and sectarian slurs IS uses in its official releases. Charlie Winter of the Transcultural Conflict and Violence Initiative at Georgia State University, and Rita Katz of SITE Intelligence Group in Washington say Amaq functions much like the state-owned news agency of IS, though the group does not acknowledge it as such. Katz said it behaves "like a state media". Amaq appears to have been allowed to develop by IS as a way to have a news outlet that is controlled by the group but is somewhat removed from it, giving IS more of the appearance of legitimacy. == Reliability == According to Rukmini Callimachi in The New York Times: "Despite a widespread view that the Islamic State opportunistically claims attacks with which it has little genuine connection, its track record—minus a handful of exceptions—suggests a more rigorous protocol. At times, the Islamic State has got details wrong, or inflated casualty figures, but the gist of its claims is typically correct." According to Callimachi, the group considers itself responsible for acts carried out by people who were inspired by its propaganda, as well as acts carried out by its own personnel and in some instances, had claimed attacks before the identities of the killers were known. Graeme Wood writing in The Atlantic in October 2017, wrote "The idea that the Islamic State simply scans the news in search of mass killings, then sends out press releases in hope of stealing glory, is false. Amaq may learn details of the attacks from mainstream media ... but its claim of credit typically flows from an Amaq-specific source." An October 2017 article in The Hill, points to two false claims made in the summer of 2017, the Resorts World Manila attack and a false claim that bombs had been planted at Charles de Gaulle Airport in Paris. Also, a claimed IS connection to the 2017 Las Vegas shooting proved to be false. According to Rita Katz on the SITE Intelligence Group website, calling a terrorist a "soldier of the caliphate (warrior from the caliphate)" in a statement issued by Amaq, was the usual way in which IS indicated that it inspired an attack. Centrally coordinated attacks were usually described as "executed by a detachment belonging to the Islamic State", and were often announced by both Amaq and by IS' central media command. == Online presence == In November 2019, Belgian police said they had carried out a successful cyberattack on Amaq, thus leaving IS without an operational communication channel. However, Amaq has since regained online presence, primarily on dark web platforms to make it harder for law enforcement to take them down without physical access to the server hosting the specific platform.

  Read more →
• 

  VITAL (machine learning software)

  VITAL (Validating Investment Tool for Advancing Life Sciences) was a Board Management Software machine learning proprietary software developed by Aging Analytics, a company registered in Bristol (England) and dissolved in 2017. Andrew Garazha (the firm's Senior Analyst) declared that the project aimed "through iterative releases and updates to create a piece of software capable of making autonomous investment decisions." According to Nick Dyer-Witheford, VITAL 1.0 was a "basic algorithm". On 13 May 2014, Deep Knowledge Ventures, a Hong Kong venture capital firm, claimed to have appointed VITAL to its board of directors in order to prove that artificial intelligence could be an instrument for investment decision-making. The announcement received great press coverage despite the fact commentators consider this a publicity stunt. Fortune reported in 2019 that VITAL is no longer used. == Criticism == Academics and journalists viewed VITAL's board appointment with skepticism. University of Sheffield computer science professor Noel Sharkey called it "a publicity hype". Michael Osborne, a University of Oxford associate professor in machine learning, found it is "a gimmick to call that an actual board member". Simon Sharwood of The Register, wrote there is "a strong whiff of stunt and/or promotion about this". In a 2019 speech, the Chief Scientist of Australia, Alan Finkel, commented, "At the time, most of us probably dismissed Vital as a PR exercise. I admit, I used her story three years ago to get a laugh in one of my speeches." Florian Möslein, a law professor at the University of Marburg, wrote in 2018 that "Vital has widely been acknowledged as the 'world's first artificial intelligence company director'". Vice journalist Jason Koebler suggested that the software did not have any article intelligence capabilities and concluded "VITAL can’t talk, and it can’t hear, and it can’t be a real, functional executive of a company." Sharwood of The Register noted that because VITAL was not a natural person, it could not be a board member under Hong Kong's corporate governance laws. However, in a 2017 interview to The Nikkei, Dmitry Kaminskiy, managing partner of Deep Knowledge Ventures, stated that VITAL had observer status on the board and no voting rights. University of Sheffield computer science professor Noel Sharkey said of VITAL, "On first sight, it looks like a futuristic idea but on reflection it is really a little bit of publicity hype." Vice journalist Jason Koebler said "this is a gimmick" and said "There is literally nothing to suggest that VITAL has any sort of capabilities beyond any other proprietary analysis software". Michael Osborne, a University of Oxford associate professor in machine learning, found VITAL's appointment to be noncredible, saying it is "a bit of a gimmick to call that an actual board member". Osborne said that a core duty of board members to converse with each other, which the algorithm is incapable of doing, so its more likely functionality is to serve as a springboard for conversation among other board members. In a 2019 speech, the Chief Scientist of Australia, Alan Finkel, commented, "At the time, most of us probably dismissed Vital as a PR exercise. I admit, I used her story three years ago to get a laugh in one of my speeches." == Machine intelligence as board member == VITAL was created by a group of programmers employed by Aging Analytics According to Andrew Garazh, Aging Analytics Senior Analyst, VITAL was not a machine learning algorithm as the necessary datasets on investment rounds, intellectual property and clinical trial outcomes are generally not disclosed. Rather, VITAL used fuzzy logic based on 50 parameters to assess risk factors. Aging Analytics licensed the software to Deep Knowledge Ventures. It was used to help the human board members of Deep Knowledge Venture make investment decisions in biotechnology companies. For instance, it supported investments in Insilico Medicine, which creates ways for computers to help find drugs in research into aging. VITAL also supported investing in Pathway Pharmaceuticals, which uses the OncoFinder algorithm to choose and appraise cancer treatments. According to Dmitry Kaminskiy, managing partner of Deep Knowledge Ventures, the motivation for using VITAL was the large number of failed investments in the biotechnology sector and the desire to avoid investing in companies likely to fail. == Ethical and legal implications == Scholars addressed questions around the safety, privacy, accountability transparency and bias in algorithms. Writing in the philosophical journal Multitudes, the academic Ariel Kyrou raised questions about the consequences of a mistake made by an algorithm recommending a dangerous investment. He raised the hypothetical where VITAL was able to persuade the board to invest in a startup that had the facade of doing research into treatment for age-associated ills, but in actuality was run by terrorists who were raising funds. Kyrou raised a series of questions about who society would fault for VITAL's mistake. As the owner of VITAL, should Deep Knowledge Ventures be held accountable, or rather should the companies that supplied data to VITAL or the people who created VITAL be held liable? Simon Sharwood of The Register wrote that because the appointment of a software program to the board directors is not legally feasible in Hong Kong, there is "a strong whiff of stunt and/or promotion about this". Quoting a Thomson Reuters website describing Hong Kong legislation related to corporate governance, Sharwood pointed out that in Hong Kong "the board comprises all of the directors of the company" and "a director must normally be a natural person, except that a private company may have a body corporate as its director if the company is not a member of a listed group." He concluded that since VITAL cannot be considered a "natural person", it is merely a "cosmetic" appointment to the board and that "this software is no more a Board member than Caligula's horse was a senator". Sharwood further argued that corporations frequently purchase directors and officers liability insurance but that it would be practically impossible to get such insurance for VITAL. Sharwood also wrote that were VITAL to be hacked, any misinformation it outputs could be considered "false and misleading communications". In the book Research Handbook on the Law of Artificial Intelligence, Florian Mölein wrote that VITAL could not become a director as defined in Hong Kong's corporate laws, so the other directors just were approaching it as "a member of [the] board with observer status". Lin Shaowei raised concerns in a Journal of East China University of Political Science and Law article about how the software's appearance inspired a complex question about the relationship between corporate law and artificial intelligence. VITAL could be considered either a board director who has voting rights or an observer who does not. Lin said either choice raised questions about whether VITAL is subject to corporate law and who would be held accountable if VITAL recommends a choice that turns out to be damaging to the company. David Theo Goldberg in the Critical Times, a peer reviewed journal in Critical Global Theory, argues that VITAL processed a dataset to predict the most remunerative investment opportunities. Drawing his analysis on an article from Business Insider, Goldberg describes VITAL's decision-making predictiveness based "on surface pattern recognition and the identification of regularities and/or irregularities". In other words, Goldberg asserts that "the normativity of the surface" explains algorithmic knowledge of a "product" like VITAL. In Homo Deus, Yuval Noah Harari mentions VITAL as an example of the future risks that humankind faces. Harari argues that the human mind is being replaced by a world in which algorithms and data make the decisions. Specifically, it is argued that "as algorithms push humans out of the job market," executive boards driven by artificial intelligence are more likely to give priority to algorithms over the humans.

  Read more →
• 

  Inverted pendulum

  An inverted pendulum is a pendulum that has its center of mass above its pivot point. It is unstable and falls over without additional help. It can be suspended stably in this inverted position by using a control system to monitor the angle of the pole and move the pivot point horizontally back under the center of mass when it starts to fall over, keeping it balanced. The inverted pendulum is a classic problem in dynamics and control theory and is used as a benchmark for testing control strategies. It is often implemented with the pivot point mounted on a cart that can move horizontally under control of an electronic servo system as shown in the photo; this is called a cart and pole apparatus. Most applications limit the pendulum to 1 degree of freedom by affixing the pole to an axis of rotation. Whereas a normal pendulum is stable when hanging downward, an inverted pendulum is inherently unstable, and must be actively balanced in order to remain upright; this can be done either by applying a torque at the pivot point, by moving the pivot point horizontally as part of a feedback system, changing the rate of rotation of a mass mounted on the pendulum on an axis parallel to the pivot axis and thereby generating a net torque on the pendulum, or by oscillating the pivot point vertically. A simple demonstration of moving the pivot point in a feedback system is achieved by balancing an upturned broomstick on the end of one's finger. A second type of inverted pendulum is a tiltmeter for tall structures, which consists of a wire anchored to the bottom of the foundation and attached to a float in a pool of oil at the top of the structure that has devices for measuring movement of the neutral position of the float away from its original position. == Overview == A pendulum with its bob hanging directly below the support pivot is at a stable equilibrium point, where it remains motionless because there is no torque on the pendulum. If displaced from this position, it experiences a restoring torque that returns it toward the equilibrium position. A pendulum with its bob in an inverted position, supported on a rigid rod directly above the pivot, 180° from its stable equilibrium position, is at an unstable equilibrium point. At this point again there is no torque on the pendulum, but the slightest displacement away from this position causes a gravitation torque on the pendulum that accelerates it away from equilibrium, causing it to fall over. In order to stabilize a pendulum in this inverted position, a feedback control system can be used, which monitors the pendulum's angle and moves the position of the pivot point sideways when the pendulum starts to fall over, to keep it balanced. The inverted pendulum is a classic problem in dynamics and control theory and is widely used as a benchmark for testing control algorithms (PID controllers, state-space representation, neural networks, fuzzy control, genetic algorithms, etc.). Variations on this problem include multiple links, allowing the motion of the cart to be commanded while maintaining the pendulum, and balancing the cart-pendulum system on a see-saw. The inverted pendulum is related to rocket or missile guidance, where the center of gravity is located behind the center of drag causing aerodynamic instability. The understanding of a similar problem can be shown by simple robotics in the form of a balancing cart. Balancing an upturned broomstick on the end of one's finger is a simple demonstration, and the problem is solved by self-balancing personal transporters such as the Segway PT, the self-balancing hoverboard and the self-balancing unicycle. Another way that an inverted pendulum may be stabilized, without any feedback or control mechanism, is by oscillating the pivot rapidly up and down. This is called Kapitza's pendulum. If the oscillation is sufficiently strong (in terms of its acceleration and amplitude) then the inverted pendulum can recover from perturbations in a strikingly counterintuitive manner. If the driving point moves in simple harmonic motion, the pendulum's motion is described by the Mathieu equation. == Equations of motion == The equations of motion of inverted pendulums are dependent on what constraints are placed on the motion of the pendulum. Inverted pendulums can be created in various configurations resulting in a number of Equations of Motion describing the behavior of the pendulum. === Stationary pivot point === In a configuration where the pivot point of the pendulum is fixed in space, the equation of motion is similar to that for an uninverted pendulum. The equation of motion below assumes no friction or any other resistance to movement, a rigid massless rod, and the restriction to 2-dimensional movement. θ ¨ − g ℓ sin ⁡ θ = 0 {\displaystyle {\ddot {\theta }}-{g \over \ell }\sin \theta =0} Where θ ¨ {\displaystyle {\ddot {\theta }}} is the angular acceleration of the pendulum, g {\displaystyle g} is the standard gravity on the surface of the Earth, ℓ {\displaystyle \ell } is the length of the pendulum, and θ {\displaystyle \theta } is the angular displacement measured from the equilibrium position. When θ ¨ {\displaystyle {\ddot {\theta }}} added to both sides, it has the same sign as the angular acceleration term: θ ¨ = g ℓ sin ⁡ θ {\displaystyle {\ddot {\theta }}={g \over \ell }\sin \theta } Thus, the inverted pendulum accelerates away from the vertical unstable equilibrium in the direction initially displaced, and the acceleration is inversely proportional to the length. Tall pendulums fall more slowly than short ones. Derivation using torque and moment of inertia: The pendulum is assumed to consist of a point mass, of mass m {\displaystyle m} , affixed to the end of a massless rigid rod, of length ℓ {\displaystyle \ell } , attached to a pivot point at the end opposite the point mass. The net torque of the system must equal the moment of inertia times the angular acceleration: τ n e t = I θ ¨ {\displaystyle {\boldsymbol {\tau }}_{\mathrm {net} }=I{\ddot {\theta }}} The torque due to gravity providing the net torque: τ n e t = m g ℓ sin ⁡ θ {\displaystyle {\boldsymbol {\tau }}_{\mathrm {net} }=mg\ell \sin \theta \,\!} Where θ {\displaystyle \theta \ } is the angle measured from the inverted equilibrium position. The resulting equation: I θ ¨ = m g ℓ sin ⁡ θ {\displaystyle I{\ddot {\theta }}=mg\ell \sin \theta \,\!} The moment of inertia for a point mass: I = m R 2 {\displaystyle I=mR^{2}} In the case of the inverted pendulum the radius is the length of the rod, ℓ {\displaystyle \ell } . Substituting in I = m ℓ 2 {\displaystyle I=m\ell ^{2}} m ℓ 2 θ ¨ = m g ℓ sin ⁡ θ {\displaystyle m\ell ^{2}{\ddot {\theta }}=mg\ell \sin \theta \,\!} Mass and ℓ 2 {\displaystyle \ell ^{2}} is divided from each side resulting in: θ ¨ = g ℓ sin ⁡ θ {\displaystyle {\ddot {\theta }}={g \over \ell }\sin \theta } === Inverted pendulum on a cart === An inverted pendulum on a cart consists of a mass m {\displaystyle m} at the top of a pole of length ℓ {\displaystyle \ell } pivoted on a horizontally moving base as shown in the adjacent image. The cart is restricted to linear motion and is subject to forces resulting in or hindering motion. === Essentials of stabilization === The essentials of stabilizing the inverted pendulum can be summarized qualitatively in three steps. 1. If the tilt angle θ {\displaystyle \theta } is to the right, the cart must accelerate to the right and vice versa. 2. The position of the cart x {\displaystyle x} relative to track center is stabilized by slightly modulating the null angle (the angle error that the control system tries to null) by the position of the cart, that is, null angle = θ + k x {\displaystyle =\theta +kx} where k {\displaystyle k} is small. This makes the pole want to lean slightly toward track center and stabilize at track center where the tilt angle is exactly vertical. Any offset in the tilt sensor or track slope that would otherwise cause instability translates into a stable position offset. A further added offset gives position control. 3. A normal pendulum subject to a moving pivot point such as a load lifted by a crane, has a peaked response at the pendulum radian frequency of ω p = g / ℓ {\displaystyle \omega _{p}={\sqrt {g/\ell }}} . To prevent uncontrolled swinging, the frequency spectrum of the pivot motion should be suppressed near ω p {\displaystyle \omega _{p}} . The inverted pendulum requires the same suppression filter to achieve stability. As a consequence of the null angle modulation strategy, the position feedback is positive, that is, a sudden command to move right produces an initial cart motion to the left followed by a move right to rebalance the pendulum. The interaction of the pendulum instability and the positive position feedback instability to produce a stable system is a feature that makes the mathematical analysis an interesting and challenging problem. === From Lagrange's equations === The equations of motion c

  Read more →
• 

  Jpred

  Jpred v.4 is the latest version of the JPred Protein Secondary Structure Prediction Server which provides predictions by the JNet algorithm, one of the most accurate methods for secondary structure prediction, that has existed since 1998 in different versions. In addition to protein secondary structure, JPred also makes predictions of solvent accessibility and coiled-coil regions. The JPred service runs up to 134 000 jobs per month and has carried out over 2 million predictions in total for users in 179 countries. == JPred 2 == The static HTML pages of JPred 2 are still available for reference. == JPred 3 == The JPred v3 followed on from previous versions of JPred developed and maintained by James Cuff and Jonathan Barber (see JPred References). This release added new functionality and fixed many bugs. The highlights are: New, friendlier user interface Retrained and optimised version of Jnet (v2) - mean secondary structure prediction accuracy of >81% Batch submission of jobs Better error checking of input sequences/alignments Predictions now (optionally) returned via e-mail Users may provide their own query names for each submission JPred now makes a prediction even when there are no PSI-BLAST hits to the query PS/PDF output now incorporates all the predictions == JPred 4 == The current version of JPred (v4) has the following improvements and updates incorporated: Retrained on the latest UniRef90 and SCOPe/ASTRAL version of Jnet (v2.3.1) - mean secondary structure prediction accuracy of >82%. Upgraded the Web Server to the latest technologies (Bootstrap framework, JavaScript) and updating the web pages – improving the design and usability through implementing responsive technologies. Added RESTful API and mass-submission and results retrieval scripts - resulting in peak throughput above 20,000 predictions per day. Added prediction jobs monitoring tools. Upgraded the results reporting – both, on the web-site, and through the optional email summary reports: improved batch submission, added results summary preview through Jalview results visualization summary in SVG and adding full multiple sequence alignments into the reports. Improved help-pages, incorporating tool-tips, and adding one-page step-by-step tutorials. Sequence residues are categorised or assigned to one of the secondary structure elements, such as alpha-helix, beta-sheet and coiled-coil. Jnet uses two neural networks for its prediction. The first network is fed with a window of 17 residues over each amino acid in the alignment plus a conservation number. It uses a hidden layer of nine nodes and has three output nodes, one for each secondary structure element. The second network is fed with a window of 19 residues (the result of first network) plus the conservation number. It has a hidden layer with nine nodes and has three output nodes.

  Read more →
• 

  Corona-Warn-App

  Corona-Warn-App was the official and open-source COVID-19 contact tracing app used for digital contact tracing in Germany made by SAP and Deutsche Telekom subsidiary T-Systems. It had been downloaded 22.8 million times as of 19 November 2020 and 26.2 million times as of 18 March 2021. The app has been promoted by billboard and broadcast advertisements, e.g. in cooperation with the German Football Association (DFB) and other prominent companies. The German government has announced that the app would no longer exchange tracing information as of April 30, 2023 & would enter hibernation as of June 1, 2023. == Effectiveness == Experts believe that time saved by using the app can be critical for improving the effectiveness contact tracing efforts. Some virologists say when at least 60% of people in Germany use it, it would be very effective. == Functioning == The app works with the Exposure Notification Framework (what is implemented in Google Play Services for Android and in iOS) by using Bluetooth to exchange codes with app users that are within 1.5 meters of each other for a period of at least 10 minutes. Anyone who tests positive for COVID-19 can share this information voluntarily with the app. Other app users are then notified about when, how long and at what distance they had contact with the infected person within a 14-day period. Testing is available for persons on a voluntary basis. === Server architecture === Based on the Client–server model five servers are operated within the app backend: the Corona-Warn-App server. It stores the authorized keys of infected users, referred to as diagnosis keys, from the past 14 days in its database. Stored diagnosis keys are grouped into regularly updated blocks which are transmitted to the Content Delivery Network. This interface supplies the keys for the app clients to download and locally compute a potential exposure risk. the Verification server. It is responsible for documenting the approval of the user to share their positive test result with the app and also to verify the test result. the Portal Server. It generates a so-called teleTAN token if the user did not give their consent to share their test result with the app at first but then changed their mind or if the local public health authority or test laboratory is not connected to the app system yet. the Test Result Server. It saves the test results provided by the local public health authorities or test laboratories for further use within the backend. the Federation Gateway Server. It connects to the national Corona-Warn-App servers of participating EU countries to enable transnational key exchange. By the distribution of the data on different servers the decoupling of the data becomes possible and results in an obstructed tracing of the app users. ==== Report of a positive COVID-19 test ==== The app provides a function to warn other app users by uploading their positive test result on a voluntarily and anonymous basis to the Corona-Warn-App server. In case the local public health authority or test laboratory is already connected to the app system, the user receives a QR-Code when the swab specimen is taken that can be scanned in the app. After scanning the QR-Code und the user getting authorized by the Verification server, the app receives an individual Registration token which gets stored locally and with which the status and the result of the test can be checked manually as well as automatically. If the local public health authority or test laboratory is not connected to the app system yet and the user wants to share their positive test result with other app users, it is required to request a teleTAN token by calling the verification hotline of the app. In both cases, the user can upload their diagnosis keys of the last 14 days to the Corona-Warn-App server in case their consent to share the information is given. The Corona-Warn-App server then verifies the uploaded keys by asking the Verification server if the keys are valid and if they are, the Corona-Warn-App server stores them in its database. == Privacy == The use of the app is voluntary. The app implements decentralized data storage to ensure data privacy. Employers can require that Corona-Warn be installed on company phones, but can not compel its use on private phones. == Funding == The open source app, which costs €20 million to develop is intended to supplement human contact tracing efforts, which Germany put in place during the early stages of the COVID-19 pandemic in Germany. In August 2022, a spokesperson for the German ministry of health announced that the total costs including all additional developments are now estimated to be closer to €150m. == Interoperability == At its start the app only worked in Germany, and Jens Spahn, than Federal Minister of Health (CDU), has said the development of a Europe-wide system is a future goal. With the update published on 19 October 2020 the app supports key-exchanges with the EU Interoperability Gateway and is therefore able to communicate with contact tracing apps from Ireland and Italy. Austria, Belgium, Czech Republic, Croatia, Cyprus, Denmark, Finland, Ireland, Italy, Latvia, Malta, Netherlands, Norway, Poland, Slovenia, Spain and Switzerland had joined the gateway as well and are also able to exchange keys with Corona-Warn-App. The app can be downloaded in many App stores outside of Germany. However, as of August 2021, the app is still unavailable for those of notable national German minorities like Turks, Russians or Ukrainians, who use App stores of their home countries. == Software variants == An unofficial Corona-Warn-App has been released on F-Droid, making the app available without proprietary components on Android phones. == Literature == Thomas Köllmann: Die Corona-Warn-App – Schnittstelle zwischen Datenschutz- und Arbeitsrecht. In: Neue Zeitschrift für Arbeitsrecht. Nr. 13, 10. Juli 2020, S. 831–836.

  Read more →
• 

  Influence diagram

  An influence diagram (ID) (also called a relevance diagram, decision diagram or a decision network) is a compact graphical and mathematical representation of a decision situation. It is a generalization of a Bayesian network, in which not only probabilistic inference problems but also decision making problems (following the maximum expected utility criterion) can be modeled and solved. ID was first developed in the mid-1970s by decision analysts with an intuitive semantic that is easy to understand. It is now adopted widely and becoming an alternative to the decision tree which typically suffers from exponential growth in number of branches with each variable modeled. ID is directly applicable in team decision analysis, since it allows incomplete sharing of information among team members to be modeled and solved explicitly. Extensions of ID also find their use in game theory as an alternative representation of the game tree. == Semantics == An ID is a directed acyclic graph with three types (plus one subtype) of node and three types of arc (or arrow) between nodes. Nodes: Decision node (corresponding to each decision to be made) is drawn as a rectangle. Uncertainty node (corresponding to each uncertainty to be modeled) is drawn as an oval. Deterministic node (corresponding to special kind of uncertainty that its outcome is deterministically known whenever the outcome of some other uncertainties are also known) is drawn as a double oval. Value node (corresponding to each component of additively separable Von Neumann-Morgenstern utility function) is drawn as an octagon (or diamond). Arcs: Functional arcs (ending in value node) indicate that one of the components of additively separable utility function is a function of all the nodes at their tails. Conditional arcs (ending in uncertainty node) indicate that the uncertainty at their heads is probabilistically conditioned on all the nodes at their tails. Conditional arcs (ending in deterministic node) indicate that the uncertainty at their heads is deterministically conditioned on all the nodes at their tails. Informational arcs (ending in decision node) indicate that the decision at their heads is made with the outcome of all the nodes at their tails known beforehand. Given a properly structured ID: Decision nodes and incoming information arcs collectively state the alternatives (what can be done when the outcome of certain decisions and/or uncertainties are known beforehand) Uncertainty/deterministic nodes and incoming conditional arcs collectively model the information (what are known and their probabilistic/deterministic relationships) Value nodes and incoming functional arcs collectively quantify the preference (how things are preferred over one another). Alternative, information, and preference are termed decision basis in decision analysis, they represent three required components of any valid decision situation. Formally, the semantic of influence diagram is based on sequential construction of nodes and arcs, which implies a specification of all conditional independencies in the diagram. The specification is defined by the d {\displaystyle d} -separation criterion of Bayesian network. According to this semantic, every node is probabilistically independent on its non-successor nodes given the outcome of its immediate predecessor nodes. Likewise, a missing arc between non-value node X {\displaystyle X} and non-value node Y {\displaystyle Y} implies that there exists a set of non-value nodes Z {\displaystyle Z} , e.g., the parents of Y {\displaystyle Y} , that renders Y {\displaystyle Y} independent of X {\displaystyle X} given the outcome of the nodes in Z {\displaystyle Z} . == Example == Consider the simple influence diagram representing a situation where a decision-maker is planning their vacation. There is 1 decision node (Vacation Activity), 2 uncertainty nodes (Weather Condition, Weather Forecast), and 1 value node (Satisfaction). There are 2 functional arcs (ending in Satisfaction), 1 conditional arc (ending in Weather Forecast), and 1 informational arc (ending in Vacation Activity). Functional arcs ending in Satisfaction indicate that Satisfaction is a utility function of Weather Condition and Vacation Activity. In other words, their satisfaction can be quantified if they know what the weather is like and what their choice of activity is. (Note that they do not value Weather Forecast directly) Conditional arc ending in Weather Forecast indicates their belief that Weather Forecast and Weather Condition can be dependent. Informational arc ending in Vacation Activity indicates that they will only know Weather Forecast, not Weather Condition, when making their choice. In other words, actual weather will be known after they make their choice, and only forecast is what they can count on at this stage. It also follows semantically, for example, that Vacation Activity is independent on (irrelevant to) Weather Condition given Weather Forecast is known. == Applicability to value of information == The above example highlights the power of the influence diagram in representing an extremely important concept in decision analysis known as the value of information. Consider the following three scenarios; Scenario 1: The decision-maker could make their Vacation Activity decision while knowing what Weather Condition will be like. This corresponds to adding extra informational arc from Weather Condition to Vacation Activity in the above influence diagram. Scenario 2: The original influence diagram as shown above. Scenario 3: The decision-maker makes their decision without even knowing the Weather Forecast. This corresponds to removing informational arc from Weather Forecast to Vacation Activity in the above influence diagram. Scenario 1 is the best possible scenario for this decision situation since there is no longer any uncertainty on what they care about (Weather Condition) when making their decision. Scenario 3, however, is the worst possible scenario for this decision situation since they need to make their decision without any hint (Weather Forecast) on what they care about (Weather Condition) will turn out to be. The decision-maker is usually better off (definitely no worse off, on average) to move from scenario 3 to scenario 2 through the acquisition of new information. The most they should be willing to pay for such move is called the value of information on Weather Forecast, which is essentially the value of imperfect information on Weather Condition. The applicability of this simple ID and the value of information concept is tremendous, especially in medical decision making when most decisions have to be made with imperfect information about their patients, diseases, etc. == Related concepts == Influence diagrams are hierarchical and can be defined either in terms of their structure or in greater detail in terms of the functional and numerical relation between diagram elements. An ID that is consistently defined at all levels—structure, function, and number—is a well-defined mathematical representation and is referred to as a well-formed influence diagram (WFID). WFIDs can be evaluated using reversal and removal operations to yield answers to a large class of probabilistic, inferential, and decision questions. More recent techniques have been developed by artificial intelligence researchers concerning Bayesian network inference (belief propagation). An influence diagram having only uncertainty nodes (i.e., a Bayesian network) is also called a relevance diagram. An arc connecting node A to B implies not only that "A is relevant to B", but also that "B is relevant to A" (i.e., relevance is a symmetric relationship).

  Read more →
• 

  Genetic representation

  In computer programming, genetic representation is a way of presenting solutions/individuals in evolutionary computation methods. The term encompasses both the concrete data structures and data types used to realize the genetic material of the candidate solutions in the form of a genome, and the relationships between search space and problem space. In the simplest case, the search space corresponds to the problem space (direct representation). The choice of problem representation is tied to the choice of genetic operators, both of which have a decisive effect on the efficiency of the optimization. Genetic representation can encode appearance, behavior, physical qualities of individuals. Difference in genetic representations is one of the major criteria drawing a line between known classes of evolutionary computation. Terminology is often analogous with natural genetics. The block of computer memory that represents one candidate solution is called an individual. The data in that block is called a chromosome. Each chromosome consists of genes. The possible values of a particular gene are called alleles. A programmer may represent all the individuals of a population using binary encoding, permutational encoding, encoding by tree, or any one of several other representations. == Representations in some popular evolutionary algorithms == Genetic algorithms (GAs) are typically linear representations; these are often, but not always, binary. Holland's original description of GA used arrays of bits. Arrays of other types and structures can be used in essentially the same way. The main property that makes these genetic representations convenient is that their parts are easily aligned due to their fixed size. This facilitates simple crossover operation. Depending on the application, variable-length representations have also been successfully used and tested in evolutionary algorithms (EA) in general and genetic algorithms in particular, although the implementation of crossover is more complex in this case. Evolution strategy uses linear real-valued representations, e.g., an array of real values. It uses mostly gaussian mutation and blending/averaging crossover. Genetic programming (GP) pioneered tree-like representations and developed genetic operators suitable for such representations. Tree-like representations are used in GP to represent and evolve functional programs with desired properties. Human-based genetic algorithm (HBGA) offers a way to avoid solving hard representation problems by outsourcing all genetic operators to outside agents, in this case, humans. The algorithm has no need for knowledge of a particular fixed genetic representation as long as there are enough external agents capable of handling those representations, allowing for free-form and evolving genetic representations. === Common genetic representations === binary array integer or real-valued array binary tree natural language parse tree directed graph == Distinction between search space and problem space == Analogous to biology, EAs distinguish between problem space (corresponds to phenotype) and search space (corresponds to genotype). The problem space contains concrete solutions to the problem being addressed, while the search space contains the encoded solutions. The mapping from search space to problem space is called genotype-phenotype mapping. The genetic operators are applied to elements of the search space, and for evaluation, elements of the search space are mapped to elements of the problem space via genotype-phenotype mapping. == Relationships between search space and problem space == The importance of an appropriate choice of search space for the success of an EA application was recognized early on. The following requirements can be placed on a suitable search space and thus on a suitable genotype-phenotype mapping: === Completeness === All possible admissible solutions must be contained in the search space. === Redundancy === When more possible genotypes exist than phenotypes, the genetic representation of the EA is called redundant. In nature, this is termed a degenerate genetic code. In the case of a redundant representation, neutral mutations are possible. These are mutations that change the genotype but do not affect the phenotype. Thus, depending on the use of the genetic operators, there may be phenotypically unchanged offspring, which can lead to unnecessary fitness determinations, among other things. Since the evaluation in real-world applications usually accounts for the lion's share of the computation time, it can slow down the optimization process. In addition, this can cause the population to have higher genotypic diversity than phenotypic diversity, which can also hinder evolutionary progress. In biology, the Neutral Theory of Molecular Evolution states that this effect plays a dominant role in natural evolution. This has motivated researchers in the EA community to examine whether neutral mutations can improve EA functioning by giving populations that have converged to a local optimum a way to escape that local optimum through genetic drift. This is discussed controversially and there are no conclusive results on neutrality in EAs. On the other hand, there are other proven measures to handle premature convergence. === Locality === The locality of a genetic representation corresponds to the degree to which distances in the search space are preserved in the problem space after genotype-phenotype mapping. That is, a representation has a high locality exactly when neighbors in the search space are also neighbors in the problem space. In order for successful schemata not to be destroyed by genotype-phenotype mapping after a minor mutation, the locality of a representation must be high. === Scaling === In genotype-phenotype mapping, the elements of the genotype can be scaled (weighted) differently. The simplest case is uniform scaling: all elements of the genotype are equally weighted in the phenotype. A common scaling is exponential. If integers are binary coded, the individual digits of the resulting binary number have exponentially different weights in representing the phenotype. Example: The number 90 is written in binary (i.e., in base two) as 1011010. If now one of the front digits is changed in the binary notation, this has a significantly greater effect on the coded number than any changes at the rear digits (the selection pressure has an exponentially greater effect on the front digits). For this reason, exponential scaling has the effect of randomly fixing the "posterior" locations in the genotype before the population gets close enough to the optimum to adjust for these subtleties. == Hybridization and repair in genotype-phenotype mapping == When mapping the genotype to the phenotype being evaluated, domain-specific knowledge can be used to improve the phenotype and/or ensure that constraints are met. This is a commonly used method to improve EA performance in terms of runtime and solution quality. It is illustrated below by two of the three examples. == Examples == === Example of a direct representation === An obvious and commonly used encoding for the traveling salesman problem and related tasks is to number the cities to be visited consecutively and store them as integers in the chromosome. The genetic operators must be suitably adapted so that they only change the order of the cities (genes) and do not cause deletions or duplications. Thus, the gene order corresponds to the city order and there is a simple one-to-one mapping. === Example of a complex genotype-phenotype mapping === In a scheduling task with heterogeneous and partially alternative resources to be assigned to a set of subtasks, the genome must contain all necessary information for the individual scheduling operations or it must be possible to derive them from it. In addition to the order of the subtasks to be executed, this includes information about the resource selection. A phenotype then consists of a list of subtasks with their start times and assigned resources. In order to be able to create this, as many allocation matrices must be created as resources can be allocated to one subtask at most. In the simplest case this is one resource, e.g., one machine, which can perform the subtask. An allocation matrix is a two-dimensional matrix, with one dimension being the available time units and the other being the resources to be allocated. Empty matrix cells indicate availability, while an entry indicates the number of the assigned subtask. The creation of allocation matrices ensures firstly that there are no inadmissible multiple allocations. Secondly, the start times of the subtasks can be read from it as well as the assigned resources. A common constraint when scheduling resources to subtasks is that a resource can only be allocated once per time unit and that the reservation must be for a contiguous period of time. To achieve this in a timely manner, which is a c

  Read more →