AI Assistant Job Interview

AI Assistant Job Interview — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Linux color management

  Linux color management has the same goal as the color management systems (CMS) for other operating systems, which is to achieve the best possible color reproduction throughout an imaging workflow from its source (camera, video, scanner, etc.), through imaging software (Digikam, darktable, RawTherapee, GIMP, Krita, Scribus, etc.), and finally onto an output medium (monitor, video projector, printer, etc.). In particular, color management attempts to enable color consistency across media and throughout a color-managed workflow. Linux color management relies on the use of accurate ICC (International Color Consortium) and DCP (DNG Color Profile) profiles describing the behavior of input and output devices, and color-managed applications that are aware of these profiles. These applications perform gamut conversions between device profiles and color spaces. Gamut conversions, based on accurate device profiles, are the essence of color management. Historically, color management was not an initial design consideration of the X Window System on which much of Linux graphics support rests, and thus color-managed workflows have been somewhat more challenging to implement on Linux than on other OS's such as Microsoft Windows or macOS. This situation is now being progressively remedied, and color management under Linux, while functional, has not yet acquired mature status. Although it is now possible to obtain a consistent color-managed workflow under Linux, certain problems still remain: The absence of a central user control panel for color settings. Some hardware devices for color calibration lack Linux drivers, firmware or accessory data. Since ICC color profiles are written to an open specification, they are compatible across operating systems. Hence, a profile produced on one OS should work on any other OS given the availability of the necessary software to read it and perform the gamut conversions. This can be used as a workaround for the lack of support for certain spectrophotometers or colorimeters under Linux: one can simply produce a profile on a different OS and then use it in a Linux workflow. Additionally, certain hardware, such as most printers and certain monitors, can be calibrated under another OS and then used in a fully color-managed workflow on Linux. The popular Ubuntu Linux distribution added initial color management in the 11.10 release (the "Oneiric Ocelot" release). == Requirements for a color-managed workflow == Accurate device profiles obtained with source or output characterization software. Correctly loaded video card lookup tables (LUTs) (or monitor profiles that do not require LUT adjustments). Color-managed applications that are configured to use a correct monitor profile and input/output profiles, with support for control over the rendering intent and black point compensation. Calibration and profiling requires: for input devices (scanner, camera, etc.) a color target which the profiling software will compare to the manufacturer-provided color values of the target. or for output devices (monitor, printer, etc.) a reading with a specific device (spectrophotometer, colorimeter or spectrocolorimeter) of the color patch values and comparing the measured values against the values originally sent for output. === Monitor calibration and profiling === One of the critical elements in any color-managed workflow is the monitor, because, at one step or another, handling and making color adaptation through imaging software is required for most images, thus the ability of the monitor to present accurate colors is crucial. Monitor color management consists of calibration and profiling. The first step, calibration, is done by adjusting the monitor controls and the output of the graphics card (via calibration curves) to match user-definable characteristics, such as brightness, white point and gamma. The calibration settings are stored in a .cal file. The second step, profiling (characterization), involves measuring the calibrated display's response and recording it in a color profile. The profile is stored in an .icc file ("ICC file"). For convenience, the calibration settings are usually stored together with the profile in the ICC file. Note that .icm files are identical to .icc files - the difference is only in the name. Seeing correct colors requires using a monitor profile-aware application, together with the same calibration used when profiling the monitor. Calibration alone does not yield accurate colors. If a monitor was calibrated before it was profiled, the profile will only yield correct colors when used on the monitor with the same calibration (the same monitor control adjustments and the same calibration curves loaded into the video card's lookup table). macOS has built-in support for loading calibration curves and installing a system-wide color profile. Windows 7 onward allows loading calibration curves, though this functionality must be enabled manually. Linux and older versions of Windows require using a standalone LUT loader. === Device profiles === ICC profiles are cross-platform and can thus be created on other operating systems and used under Linux. Monitor profiles, however, require some additional attention. Since a monitor profile depends both on the monitor itself and on the video card, a monitor profile should only be used with the same monitor and video card with which it was created. The monitor settings should not be adjusted after creating the profile. In addition, since most calibration software use LUT adjustments during calibration, the corresponding LUTs must be loaded every time the display server (X11, Wayland) is started (e.g. with every graphical login). In the unlikely case of a colorimeter being unsupported by Linux, a profile created under Windows or macOS can be used under Linux. === Display-channel lookup tables === There are two approaches to loading display channel LUTs: Create a profile that does not modify video card LUTs and thus does not require LUTs be loaded later on. Ideally, this approach would rely on DDC-capable monitors—the internal monitor settings of which are set via calibration software. Unfortunately, monitors capable of making these adjustments through DDC are not common and are generally expensive. There is only one calibration software on Linux that can interact with a DDC monitor. For mainstream monitors, a couple of options exist: BasICColor software, which works with most colorimeters on the market, allows one to adjust display output via the monitor interface, and then to choose a "Profile, do not calibrate" option. By doing this, one can create a profile that does not require video card LUT adjustments. For EyeOne devices, EyeOne Match allows the user to calibrate to "Native" gamma and white point targets, which results in the LUT adjustment curves displayed after the calibration as a simple, linear 1:1 mapping (a straight line from corner to corner). Both BasICColor and EyeOne Match do not presently run under Linux but they are capable of creating a profile that does not require LUT adjustments. Use an LUT loader to actually load the LUT adjustments contained within the profile prepared during calibration. According to the documentation, these loaders do not modify the video card LUT by itself, but achieve the same type of adjustment by modifying the X server gamma ramp. Loaders are available for Linux distributions that use X.org or XFree86—the two most popular X servers on Linux. Other X servers are not guaranteed to work with the currently available loaders. There are two LUT loaders available for Linux: Xcalib is one such loader, and although it is a command-line utility, it is quite easy to use. dispwin is a part of Argyll CMS. If, for any reason, the LUT cannot be loaded, it is still recommended to go through the initial stages of calibration where a user is asked by calibration software to make some manual adjustments to the monitor, as this will often improve display linearity and also provide information on its color temperature. This is especially recommended for CRT monitors. === Color-managed applications === In ICC-aware applications, it is important to make sure the correct profiles are assigned to devices, mainly to the monitor and the printer. Some Linux applications can auto-detect the monitor profile, while others requires that it is specified manually. Although there is no designated place to store device profiles on Linux, /usr/share/color/icc/ has become the de facto standard. Most applications running under WINE have not been fully tested for color accuracy. While 8-bpp programs can have some color resolution difficulties due to depth conversion errors, colors in higher-depth applications should be accurate, as long as those programs perform their gamut conversions based on the same monitor profile as that used for loading the LUT, granted that the corresponding LUT adjustments are loaded. == List of color-managed applications == darktabl

  Read more →
• 

  Quantification (machine learning)

  In machine learning, quantification (variously called learning to quantify, or supervised prevalence estimation, or class prior estimation) is the task of using supervised learning in order to train models (quantifiers) that estimate the relative frequencies (also known as prevalence values) of the classes of interest in a sample of unlabelled data items. For instance, in a sample of 100,000 unlabelled tweets known to express opinions about a certain political candidate, a quantifier may be used to estimate the percentage of these tweets which belong to class `Positive' (i.e., which manifest a positive stance towards this candidate), and to do the same for classes `Neutral' and `Negative'. Quantification may also be viewed as the task of training predictors that estimate a (discrete) probability distribution, i.e., that generate a predicted distribution that approximates the unknown true distribution of the items across the classes of interest. Quantification is different from classification, since the goal of classification is to predict the class labels of individual data items, while the goal of quantification it to predict the class prevalence values of sets of data items. Quantification is also different from regression, since in regression the training data items have real-valued labels, while in quantification the training data items have class labels. It has been shown in multiple research works that performing quantification by classifying all unlabelled instances and then counting the instances that have been attributed to each class (the 'classify and count' method) usually leads to suboptimal quantification accuracy. This suboptimality may be seen as a direct consequence of 'Vapnik's principle', which states: If you possess a restricted amount of information for solving some problem, try to solve the problem directly and never solve a more general problem as an intermediate step. It is possible that the available information is sufficient for a direct solution but is insufficient for solving a more general intermediate problem. In our case, the problem to be solved directly is quantification, while the more general intermediate problem is classification. As a result of the suboptimality of the 'classify and count' method, quantification has evolved as a task in its own right, different (in goals, methods, techniques, and evaluation measures) from classification. == Quantification tasks == === Quantification tasks according to the set of classes === The main variants of quantification, according to the characteristics of the set of classes used, are: Binary quantification, corresponding to the case in which there are only n = 2 {\displaystyle n=2} classes and each data item belongs to exactly one of them; Single-label multiclass quantification, corresponding to the case in which there are n > 2 {\displaystyle n>2} classes and each data item belongs to exactly one of them; Multi-label multiclass quantification, corresponding to the case in which there are n ≥ 2 {\displaystyle n\geq 2} classes and each data item can belong to zero, one, or several classes at the same time; Ordinal quantification, corresponding to the single-label multiclass case in which a total order is defined on the set of classes. Regression quantification, a task which stands to 'standard' quantification as regression stands to classification. Strictly speaking, this task is not a quantification task as defined above (since the individual items do not have class labels but are labelled by real values), but has enough commonalities with other quantification tasks to be considered one of them. Most known quantification methods address the binary case or the single-label multiclass case, and only few of them address the multi-label, ordinal, and regression cases. Binary-only methods include the Mixture Model (MM) method, the HDy method, SVM(KLD), and SVM(Q). Methods that can deal with both the binary case and the single-label multiclass case include probabilistic classify and count (PCC), adjusted classify and count (ACC), probabilistic adjusted classify and count (PACC), the Saerens-Latinne-Decaestecker EM-based method (SLD), and KDEy. Methods for multi-label quantification include regression-based quantification (RQ) and label powerset-based quantification (LPQ). Methods for the ordinal case include ordinal versions of the above-mentioned ACC, PACC, and SLD methods, and ordinal versions of the above-mentioned HDy method. Methods for the regression case include Regress and splice and Adjusted regress and sum. === Quantification tasks according to the type of data === Several subtasks of quantification may be identified according to the type of data involved. Example such tasks are: Quantification of networked data. This task consists of performing quantification when the datapoints are members of a relation, i.e., are interlinked. As such, this task is a strict relative of collective classification. Quantification over time. This task consists of performing quantification on sets that become available in a temporal sequence, i.e., as a data stream, and finds application in contexts in which class prevalence values must be monitored over time. == Evaluation measures for quantification == Several evaluation measures can be used for evaluating the error of a quantification method. Since quantification consists of generating a predicted probability distribution that estimates a true probability distribution, these evaluation measures are ones that compare two probability distributions. Most evaluation measures for quantification belong to the class of divergences. Evaluation measures for binary quantification, single-label multiclass quantification, and multi-label quantification, are Absolute Error Squared Error Relative Absolute Error Kullback–Leibler divergence Pearson Divergence Evaluation measures for ordinal quantification are Normalized Match Distance (a particular case of the Earth Mover's Distance) Root Normalized Order-Aware Distance == Applications == Quantification is of special interest in fields such as the social sciences, epidemiology, market research, allocating resources, and ecological modelling, since these fields are inherently concerned with aggregate data. However, quantification is also useful as a building block for solving other downstream tasks, such as improving the accuracy of classifiers on out-of-distribution data, measuring classifier bias and ranker bias, and estimating the accuracy of classifiers on out-of-distribution data. == Resources == LQ 2021: the 1st International Workshop on Learning to Quantify LQ 2022: the 2nd International Workshop on Learning to Quantify LQ 2023: the 3rd International Workshop on Learning to Quantify LQ 2024: the 4th International Workshop on Learning to Quantify LQ 2025: the 5th International Workshop on Learning to Quantify LeQua 2022: the 1st Data Challenge on Learning to Quantify LeQua 2024: the 2nd Data Challenge on Learning to Quantify QuaPy: An open-source Python-based software library for quantification QuantificationLib: A Python library for quantification and prevalence estimation

  Read more →
• 

  2024–present global memory supply shortage

  A global computer memory supply shortage started in 2024 due to supply constraints and rapid price escalation in the semiconductor memory market, particularly affecting DRAM and NAND flash memory. This shortage is sometimes labelled by tech media outlets as "RAMmageddon" or the "RAMpocalypse". Unlike the 2020–2023 global chip shortage, which stemmed primarily from pandemic-related supply chain disruptions from COVID-19, this shortage is driven by a structural reallocation of manufacturing capacity toward high-margin products for artificial intelligence infrastructure, creating scarcity of computer memory in consumer and enterprise PC markets. According to a 2026 Kearney's PERLab analysis, the shortage is expected to last at least until 2030, with CEOs agreeing with the timelines. == Background == Following a severe market downturn in 2022–2023, major memory manufacturers—Samsung Electronics, SK Hynix, and Micron Technology—implemented strategic production cuts to stabilize pricing. By mid-2024, the rapid expansion of generative AI services triggered unprecedented demand for specialized memory products, particularly High Bandwidth Memory (HBM) used in AI accelerators and data center GPUs. Specialized components of semiconductor technology are also experiencing supply constraints due to high demand in AI application. For example, glass cloth, a high-performance glass fiber substrate used for power efficient high speed data transfer and a crucial component of semiconductor manufacturing, is experiencing a supply crisis. Nitto Boseki, a Japanese firm having overwhelming monopoly in its production, is not able to meet increased demands, making chip-makers such as Qualcomm, Apple, Nvidia and AMD compete for securing supply. There are also reports of smaller electronics companies struggling to find suppliers for components such as NAND flash. Memory suppliers are adapting to increased demands and market unpredictability by requiring prepayment or shorter time-frame of payment, which makes it more difficult for smaller firms to acquire capital to survive. By 2026, due to steadily increased demand on resources, CPUs are also experiencing shortage issues due to low fabrication capacity, prioritisation of server CPUs, and increased demand, with CPU prices also being forecast to increase by as much as 15%. The demand on memory has also increased strain on other electronic components such as hard disk devices, with reports such as Western Digital's hard disk supply for 2026 being booked for enterprise applications before February 2026. A 2024 McKinsey analysis projected that global demand for AI-ready data center capacity would grow at approximately 33% annually through 2030, with AI workloads consuming roughly 70% of total data center capacity by the decade's end. In addition, according to Kearney's State of Semiconductor 2025 Report, executives were already expecting a shortage in the <8nm wafer size with memory chips being mentioned as an acute source of concern. Multiple companies mentioned being prepared for it through long-term agreements with RAM suppliers or amassing additional inventory. On 24 March 2026, Google announced TurboQuant, a memory compression technology focused on large language models (LLM) and vector search engines, which it claimed achieves 6x lower memory consumption in tested local LLMs and 8x performance enhancement in tests running on H100 accelerators. The technology is also a drop in enhancement for existing inference pipeline. Amid speculation about memory demand trends, memory manufacturers, SanDisk, Micron, Western Digital and Seagate, among other companies involved in memory manufacture experienced stock price declines. Prices of memory kits also reduced in the following months, although still at inflated prices. == Causes == === HBM production displacement === HBM manufacturing requires significantly more wafer capacity per bit than standard DRAM modules. Industry sources reported that as manufacturers allocated increasing wafer capacity to HBM production to meet contracts with AI infrastructure providers, the supply of conventional DDR4 and DDR5 modules for consumer PCs and smartphones contracted sharply. By September 2025, Samsung Electronics had reportedly expanded its 1c DRAM capacity to target 60,000 wafers per month specifically for HBM4 production, further diverting resources from consumer memory lines. === Geopolitical and trade barriers === The supply chain was further constrained by escalating trade tensions between the United States and China. Throughout 2025, fears of U.S. regulatory backlash and new tariff structures led major manufacturers like Samsung and SK Hynix to halt sales of older semiconductor manufacturing equipment to Chinese entities, effectively capping production capacity in the region. Additionally, proposed tariff policies by the U.S. administration in late 2025 prompted supply chain realignments, with Apple reportedly accelerating plans to source all U.S.-bound iPhones from India to avoid potential levies. === NAND flash capacity constraints === In the NAND flash segment, manufacturers prioritized higher-margin enterprise SSDs for data center applications while phasing out older process nodes more rapidly than anticipated. In November 2025, contract prices for NAND wafers increased by more than 60% month-over-month for certain product categories, with 512GB TLC experiencing the steepest rise as legacy manufacturing capacity was retired. == Impact on industry and consumers == === Manufacturer responses === Major PC manufacturers responded to component cost increases with significant price adjustments and supply chain strategies. Dell Technologies Chief Operating Officer Jeff Clarke stated during a November 2025 analyst call that the company had "never witnessed costs escalating at the current pace," describing tighter availability across DRAM, hard drives, and NAND flash memory. Analysts at Morgan Stanley downgraded Dell Technologies stock from "Overweight" to "Underweight" in late 2025, citing the company's heavy exposure to rising server memory costs. The firm warned that skyrocketing memory prices could significantly erode margins for server and PC OEMs. Conversely, Apple Inc. was reportedly less affected than its competitors, having secured long-term supply agreements for DRAM through the first quarter of 2026. Lenovo Chief Financial Officer Winston Cheng described the cost surge as "unprecedented" and disclosed that the company's memory inventories were approximately 50% above normal levels in anticipation of further price increases. === Consumer electronics sector === The shortage particularly affected smartphone manufacturers and other consumer electronics producers. DRAM prices reportedly rose by 172% throughout 2025, leading manufacturers like Samsung to halt new orders for DDR5 modules to reassess pricing structures and Micron to exit its 'Crucial' brand of consumer products. In Tokyo's Akihabara electronics district, retailers began limiting purchases of memory products to prevent hoarding, with prices for popular DDR5 memory modules more than doubling in some cases. Despite the broad trend of rising hardware costs, some companies engaged in aggressive pricing strategies to maintain market share; for example, Sony reduced the price of the PlayStation 5 by $100 for Black Friday 2025, potentially absorbing increased component costs to stimulate software ecosystem growth. Due to memory prices more than doubling in a single quarter, HP revealed in its Q1 2026 earnings call that memory costs account for 35% of PC build materials up from 15-18% previous quarter. Despite showing strong Q1 2026 earning driven by Windows 11 upgrade cycle and AI PC adoption, HP warned investors of low operating margins and up to double digit percentage decline for coming quarter. Trendforce, an IT analytics company, updated its forecast from 1.7% year-over-year growth in PC market to 2.6% year-over-year decline for 2026, amid backdrop of steadily increasing prices and supply crisis. Research and analytics firms, Gartner and IDC expect worldwide PC market to decline 10-11% and smartphone market to decline 8-9% in 2026. Gartner also projects that rising memory prices will make low-margin entry level laptops under 500 USD financially unviable in two years. The RAM shortage has delayed the release of Valve's second Steam Machine due to increased memory prices. The device was originally set to launch in early 2026. === AI infrastructure competition === Technology companies including Google, Amazon, Microsoft, and Meta Platforms placed open-ended orders with memory suppliers, indicating they would accept as much supply as available regardless of cost, according to Reuters sources. The limited supply of AI chips has been cited as a reason for the slow down in compute growth. In October 2025, OpenAI formally announced a strategic partnership using letters of intent with Samsung Electronics and SK Hynix

  Read more →
• 

  Action model learning

  Action model learning (sometimes abbreviated action learning) is an area of machine learning concerned with the creation and modification of a software agent's knowledge about the effects and preconditions of the actions that can be executed within its environment. This knowledge is usually represented in a logic-based action description language and used as input for automated planners. Learning action models is important when goals change. When an agent acted for a while, it can use its accumulated knowledge about actions in the domain to make better decisions. Thus, learning action models differs from reinforcement learning. It enables reasoning about actions instead of expensive trials in the world. Action model learning is a form of inductive reasoning, where new knowledge is generated based on the agent's observations. The usual motivation for action model learning is the fact that manual specification of action models for planners is often a difficult, time-consuming, and error-prone task (especially in complex environments). == Action models == Given a training set E {\displaystyle E} consisting of examples e = ( s , a , s ′ ) {\displaystyle e=(s,a,s')} , where s , s ′ {\displaystyle s,s'} are observations of a world state from two consecutive time steps t , t ′ {\displaystyle t,t'} and a {\displaystyle a} is an action instance observed in time step t {\displaystyle t} , the goal of action model learning in general is to construct an action model ⟨ D , P ⟩ {\displaystyle \langle D,P\rangle } , where D {\displaystyle D} is a description of domain dynamics in action description formalism like STRIPS, ADL or PDDL and P {\displaystyle P} is a probability function defined over the elements of D {\displaystyle D} . However, many state of the art action learning methods assume determinism and do not induce P {\displaystyle P} . In addition to determinism, individual methods differ in how they deal with other attributes of domain (e.g. partial observability or sensoric noise). == Action learning methods == === State of the art === Recent action learning methods take various approaches and employ a wide variety of tools from different areas of artificial intelligence and computational logic. As an example of a method based on propositional logic, we can mention SLAF (Simultaneous Learning and Filtering) algorithm, which uses agent's observations to construct a long propositional formula over time and subsequently interprets it using a satisfiability (SAT) solver. Another technique, in which learning is converted into a satisfiability problem (weighted MAX-SAT in this case) and SAT solvers are used, is implemented in ARMS (Action-Relation Modeling System). Two mutually similar, fully declarative approaches to action learning were based on logic programming paradigm Answer Set Programming (ASP) and its extension, Reactive ASP. In another example, bottom-up inductive logic programming approach was employed. Several different solutions are not directly logic-based. For example, the action model learning using a perceptron algorithm or the multi level greedy search over the space of possible action models. In the older paper from 1992, the action model learning was studied as an extension of reinforcement learning. Nonetheless, further algorithms can be found that operate under different assumptions: FAMA can work even when some observations are missing, and it produces a general (lifted) planning model. It treats learning an action model like a planning problem, making sure the learned model matches the observations given. NOLAM can learn general action models even from noisy or imperfect data. LOCM focuses only on the order of actions in the data, ignoring any details about the states between those actions. The family of safe action model (SAM) learning methods create models that guarantee any plans made with them will actually work in the real world. There's also an extension called N-SAM that can learn action models with numeric conditions and effects. Additionally, numeric action models like N-SAM can be used to improve reinforcement learning (RL) performance through the RAMP algorithm. === Literature === Most action learning research papers are published in journals and conferences focused on artificial intelligence in general (e.g. Journal of Artificial Intelligence Research (JAIR), Artificial Intelligence, Applied Artificial Intelligence (AAI) or AAAI conferences). Despite mutual relevance of the topics, action model learning is usually not addressed in planning conferences like the International Conference on Automated Planning and Scheduling (ICAPS).

  Read more →
• 

  Programming tool

  A programming tool or software development tool is a computer program that is used to develop another computer program, usually by helping the developer manage computer files. For example, a programmer may use a tool called a source code editor to edit source code files, and then a compiler to convert the source code into machine code files. They may also use build tools that automatically package executable program and data files into shareable packages or install kits. A set of tools that are run one after another, with each tool feeding its output to the next one, is called a toolchain. An integrated development environment (IDE) integrates the function of several tools into a single program. Usually, an IDE provides a source code editor as well as other built-in or plug-in tools that help with compiling, debugging, and testing. Whether a program is considered a development tool can be subjective. Some programs, such as the GNU compiler collection, are used exclusively for software development while others, such as Notepad, are not meant specifically for development but are nevertheless often used for programming. == Categories == Notable categories of development tools: Assembler – Converts assembly language into machine code Bug tracking system – Software application that records software bugs Build automation – Building software via an unattended fashion Code review software – Activity where one or more people check a program's code Compiler – Software that translates code from one programming language to another Compiler-compiler – Program that generates parsers or compilers, a.k.a. parser generator Debugger – Software for debugging a computer program Decompiler – Program translating executable to source code Disassembler – Computer program to translate machine language into assembly language Documentation generator – Automation technology for creating software documentation Graphical user interface builder – Software development tool Linker – Program that combines intermediate build files into an executable file Loader – Loads executable files into memory and prepares them for execution by the CPU. Memory debugger – Software memory problem finder Minifier – Removal of unnecessary characters in code without changing its functionality Pretty-printer – Formatting to make code or markup easier to readPages displaying short descriptions of redirect targets Performance profiler – Measuring the time or resources used by a section of a computer program Static code analyzer – Analysis of computer programs without executing themPages displaying short descriptions of redirect targets Source code editor – Text editor specializing in software codePages displaying short descriptions of redirect targets Source code generation – Type of computer programmingPages displaying short descriptions of redirect targets Version control system – Stores and tracks versions of files

  Read more →
• 

  Hyperparameter (machine learning)

  In machine learning, a hyperparameter is a parameter that can be set in order to define any configurable part of a model's learning process. Hyperparameters can be classified as either model hyperparameters (such as the topology and size of a neural network) or algorithm hyperparameters (such as the learning rate and the batch size of an optimizer). These are named hyperparameters in contrast to parameters, which are characteristics that the model learns from the data. Hyperparameters are not required by every model or algorithm. Some simple algorithms such as ordinary least squares regression require none. However, the LASSO algorithm, for example, adds a regularization hyperparameter to ordinary least squares which must be set before training. Even models and algorithms without a strict requirement to define hyperparameters may not produce meaningful results if these are not carefully chosen. However, optimal values for hyperparameters are not always easy to predict. Some hyperparameters may have no meaningful effect, or one important variable may be conditional upon the value of another. Often a separate process of hyperparameter tuning is needed to find a suitable combination for the data and task. As well as improving model performance, hyperparameters can be used by researchers to introduce robustness and reproducibility into their work, especially if it uses models that incorporate random number generation. == Considerations == The time required to train and test a model can depend upon the choice of its hyperparameters. A hyperparameter is usually of continuous or integer type, leading to mixed-type optimization problems. The existence of some hyperparameters is conditional upon the value of others, e.g. the size of each hidden layer in a neural network can be conditional upon the number of layers. === Difficulty-learnable parameters === The objective function is typically non-differentiable with respect to hyperparameters. As a result, in most instances, hyperparameters cannot be learned using gradient-based optimization methods (such as gradient descent), which are commonly employed to learn model parameters. These hyperparameters are those parameters describing a model representation that cannot be learned by common optimization methods, but nonetheless affect the loss function. An example would be the tolerance hyperparameter for errors in support vector machines. === Untrainable parameters === Sometimes, hyperparameters cannot be learned from the training data because they aggressively increase the capacity of a model and can push the loss function to an undesired minimum (overfitting to the data), as opposed to correctly mapping the richness of the structure in the data. For example, if we treat the degree of a polynomial equation fitting a regression model as a trainable parameter, the degree would increase until the model perfectly fit the data, yielding low training error, but poor generalization performance. === Tunability === Most performance variation can be attributed to just a few hyperparameters. The tunability of an algorithm, hyperparameter, or interacting hyperparameters is a measure of how much performance can be gained by tuning it. For an LSTM, while the learning rate followed by the network size are its most crucial hyperparameters, batching and momentum have no significant effect on its performance. Although some research has advocated the use of mini-batch sizes in the thousands, other work has found the best performance with mini-batch sizes between 2 and 32. === Robustness === An inherent stochasticity in learning directly implies that the empirical hyperparameter performance is not necessarily its true performance. Methods that are not robust to simple changes in hyperparameters, random seeds, or even different implementations of the same algorithm cannot be integrated into mission critical control systems without significant simplification and robustification. Reinforcement learning algorithms, in particular, require measuring their performance over a large number of random seeds, and also measuring their sensitivity to choices of hyperparameters. Their evaluation with a small number of random seeds does not capture performance adequately due to high variance. Some reinforcement learning methods, e.g. DDPG (Deep Deterministic Policy Gradient), are more sensitive to hyperparameter choices than others. == Optimization == Hyperparameter optimization finds a tuple of hyperparameters that yields an optimal model which minimizes a predefined loss function on given test data. The objective function takes a tuple of hyperparameters and returns the associated loss. Typically these methods are not gradient based, and instead apply concepts from derivative-free optimization or black box optimization. == Reproducibility == Apart from tuning hyperparameters, machine learning involves storing and organizing the parameters and results, and making sure they are reproducible. In the absence of a robust infrastructure for this purpose, research code often evolves quickly and compromises essential aspects like bookkeeping and reproducibility. Online collaboration platforms for machine learning go further by allowing scientists to automatically share, organize and discuss experiments, data, and algorithms. Reproducibility can be particularly difficult for deep learning models. For example, research has shown that deep learning models depend very heavily even on the random seed selection of the random number generator.

  Read more →
• 

  Instance (computer science)

  In computer science, an instance or token (from metalogic and metamathematics) is a specific occurrence of a software element that is based on a type definition. When created, an occurrence is said to have been instantiated, and both the creation process and the result of creation are called instantiation. == Examples == Chat AI instance In chat-based AI systems, an assistant can be invoked across many independent conversation sessions (often called a thread), each with its own message history. A specific execution of the assistant over that session may be represented as a run (an execution on a thread). Class instance In object-oriented programming, an object created from a class type. Each instance of a class shares the class-defined structure and behavior but has its own identity and state. Procedural instance In some contexts (including Simula), each procedure call can be viewed as an instance of that procedure—an activation with its own parameters and local variables. Computer instance In cloud computing and virtualization, an instance commonly refers to a provisioned virtual machine or virtual server with an allocated combination of compute, memory, network, and storage resources. Polygonal model In computer graphics, a model may be instanced so it can be drawn multiple times with different transforms and parameters, improving performance by reusing shared geometry data. Program instance In a POSIX-oriented operating system, a running process is an instance of a program. It can be instantiated via system calls such as fork() and exec(). Each executing process is an instance of a program it has been instantiated from.

  Read more →
• 

  Anomaly detection

  In data analysis, anomaly detection (also referred to as outlier detection and sometimes as novelty detection) is generally understood to be the identification of rare items, events or observations which deviate significantly from the majority of the data and do not conform to a well defined notion of normal behavior. Such examples may arouse suspicions of being generated by a different mechanism, or appear inconsistent with the remainder of that set of data. Anomaly detection finds application in many domains including cybersecurity, medicine, machine vision, statistics, neuroscience, law enforcement and financial fraud to name only a few. Anomalies were initially searched for clear rejection or omission from the data to aid statistical analysis, for example to compute the mean or standard deviation. They were also removed to better predictions from models such as linear regression, and more recently their removal aids the performance of machine learning algorithms. However, in many applications anomalies themselves are of interest and are the observations most desirous in the entire data set, which need to be identified and separated from noise or irrelevant outliers. Three broad categories of anomaly detection techniques exist. Supervised anomaly detection techniques require a data set that has been labeled as "normal" and "abnormal" and involves training a classifier. However, this approach is rarely used in anomaly detection due to the general unavailability of labelled data and the inherent unbalanced nature of the classes. Semi-supervised anomaly detection techniques assume that some portion of the data is labelled. This may be any combination of the normal or anomalous data, but more often than not, the techniques construct a model representing normal behavior from a given normal training data set, and then test the likelihood of a test instance to be generated by the model. Unsupervised anomaly detection techniques assume the data is unlabelled and are by far the most commonly used due to their wider and relevant application. == Definition == Many attempts have been made in the statistical and computer science communities to define an anomaly. The most prevalent ones include the following, and can be categorised into three groups: those that are ambiguous, those that are specific to a method with pre-defined thresholds usually chosen empirically, and those that are formally defined: === Ill defined === An outlier is an observation which deviates so much from the other observations as to arouse suspicions that it was generated by a different mechanism. Anomalies are instances or collections of data that occur very rarely in the data set and whose features differ significantly from most of the data. An outlier is an observation (or subset of observations) which appears to be inconsistent with the remainder of that set of data. An anomaly is a point or collection of points that is relatively distant from other points in multi-dimensional space of features. Anomalies are patterns in data that do not conform to a well-defined notion of normal behaviour. === Specific === Let T be observations from a univariate Gaussian distribution and O a point from T. Then the z-score for O is greater than a pre-selected threshold if and only if O is an outlier. == History == === Intrusion detection === The concept of intrusion detection, a critical component of anomaly detection, has evolved significantly over time. Initially, it was a manual process where system administrators would monitor for unusual activities, such as a vacationing user's account being accessed or unexpected printer activity. This approach was not scalable and was soon superseded by the analysis of audit logs and system logs for signs of malicious behavior. By the late 1970s and early 1980s, the analysis of these logs was primarily used retrospectively to investigate incidents, as the volume of data made it impractical for real-time monitoring. The affordability of digital storage eventually led to audit logs being analyzed online, with specialized programs being developed to sift through the data. These programs, however, were typically run during off-peak hours due to their computational intensity. The 1990s brought the advent of real-time intrusion detection systems capable of analyzing audit data as it was generated, allowing for immediate detection of and response to attacks. This marked a significant shift towards proactive intrusion detection. As the field has continued to develop, the focus has shifted to creating solutions that can be efficiently implemented across large and complex network environments, adapting to the ever-growing variety of security threats and the dynamic nature of modern computing infrastructures. == Applications == Anomaly detection is applicable in a very large number and variety of domains, and is an important subarea of unsupervised machine learning. As such it has applications in cyber-security, intrusion detection, fraud detection, fault detection, system health monitoring, event detection in sensor networks, detecting ecosystem disturbances, defect detection in images using machine vision, medical diagnosis and law enforcement. === Intrusion detection === Anomaly detection was proposed for intrusion detection systems (IDS) by Dorothy Denning in 1986. Anomaly detection for IDS is normally accomplished with thresholds and statistics, but can also be done with soft computing, and inductive learning. Types of features proposed by 1999 included profiles of users, workstations, networks, remote hosts, groups of users, and programs based on frequencies, means, variances, covariances, and standard deviations. The counterpart of anomaly detection in intrusion detection is misuse detection. === Fintech fraud detection === Anomaly detection is vital in fintech for fraud prevention. === Preprocessing === Preprocessing data to remove anomalies can be an important step in data analysis, and is done for a number of reasons. Statistics such as the mean and standard deviation are more accurate after the removal of anomalies, and the visualisation of data can also be improved. In supervised learning, removing the anomalous data from the dataset often results in a statistically significant increase in accuracy. === Video surveillance === Anomaly detection has become increasingly vital in video surveillance to enhance security and safety. With the advent of deep learning technologies, methods using Convolutional Neural Networks (CNNs) and Simple Recurrent Units (SRUs) have shown significant promise in identifying unusual activities or behaviors in video data. These models can process and analyze extensive video feeds in real-time, recognizing patterns that deviate from the norm, which may indicate potential security threats or safety violations. An important aspect for video surveillance is the development of scalable real-time frameworks. Such pipelines are required for processing multiple video streams with low computational resources. === IT infrastructure === In IT infrastructure management, anomaly detection is crucial for ensuring the smooth operation and reliability of services. These are complex systems, composed of many interactive elements and large data quantities, requiring methods to process and reduce this data into a human and machine interpretable format. Techniques like the IT Infrastructure Library (ITIL) and monitoring frameworks are employed to track and manage system performance and user experience. Detected anomalies can help identify and pre-empt potential performance degradations or system failures, thus maintaining productivity and business process effectiveness. === IoT systems === Anomaly detection is critical for the security and efficiency of Internet of Things (IoT) systems. It helps in identifying system failures and security breaches in complex networks of IoT devices. The methods must manage real-time data, diverse device types, and scale effectively. Garg et al. have introduced a multi-stage anomaly detection framework that improves upon traditional methods by incorporating spatial clustering, density-based clustering, and locality-sensitive hashing. This tailored approach is designed to better handle the vast and varied nature of IoT data, thereby enhancing security and operational reliability in smart infrastructure and industrial IoT systems. === Petroleum industry === Anomaly detection is crucial in the petroleum industry for monitoring critical machinery. A 2015 paper proposed a novel segmentation algorithm using support vector machines to analyze sensor data for real-time anomaly detection. === Oil and gas pipeline monitoring === In the oil and gas sector, anomaly detection is not just crucial for maintenance and safety, but also for environmental protection. Aljameel et al. propose an advanced machine learning-based model for detecting minor leaks in oil and gas pipelines, a task traditional methods may miss.

  Read more →
• 

  Patent visualisation

  Patent visualisation is an application of information visualisation. The number of patents has been increasing, encouraging companies to consider intellectual property as a part of their strategy. Patent visualisation, like patent mapping, is used to quickly view a patent portfolio. Software dedicated to patent visualisation began to appear in 2000, for example Aureka from Aurigin (now owned by Thomson Reuters). Many patent and portfolio analytics platforms, such as Questel, Patent Forecast, PatSnap, Patentcloud, Relecura, and Patent iNSIGHT Pro, offer options to visualise specific data within patent documents by creating topic maps, priority maps, IP Landscape reports, etc. Software converts patents into infographics or maps, to allow the analyst to "get insight into the data" and draw conclusions. Also called patinformatics, it is the "science of analysing patent information to discover relationships and trends that would be difficult to see when working with patent documents on a one-and-one basis". Patents contain structured data (like publication numbers) and unstructured text (like title, abstract, claims and visual info). Structured data are processed by data-mining and unstructured data are processed with text-mining. == Data mining == The main step in processing structured information is data-mining, which emerged in the late 1980s. Data mining involves statistics, artificial intelligence, and machine learning. Patent data mining extracts information from the structured data of the patent document. These structured data are bibliographic fields such as location, date or status. === Structured fields === === Advantages === Data mining allows study of filing patterns of competitors and locates main patent filers within a specific area of technology. This approach can be helpful to monitor competitors' environments, moves and innovation trends and gives a macro view of a technology status. == Text-mining == === Principle === Text mining is used to search through unstructured text documents. This technique is widely used on the Internet, it has had success in bioinformatics and now in the intellectual property environment. Text mining is based on a statistical analysis of word recurrence in a corpus. An algorithm extracts words and expressions from title, summary and claims and gathers them by declension. "And" and "if" are labeled as non-information bearing words and are stored in the stopword list. Stoplists can be specialised in order to create an accurate analysis. Next, the algorithm ranks the words by weight, according to their frequency in the patent's corpus and the document frequency containing this word. The score for each word is calculated using a formula such as: W e i g h t = T e r m F r e q u e n c y D o c u m e n t F r e q u e n c y = F r e q u e n c y o f t h e w o r d o r e x p r e s s i o n i n t h e T e x t S e a N u m b e r o f d o c u m e n t s c o n t a i n i n g t h e e x p r e s s i o n o r w o r d {\displaystyle Weight={\frac {Term\ Frequency}{Document\ Frequency}}={\frac {Frequency\ of\ the\ word\ or\ expression\ in\ the\ Text\ Sea}{Number\ of\ documents\ containing\ the\ expression\ or\ word}}} A frequently used word in several documents has less weight than a word used frequently in a few patents. Words under a minimum weight are eliminated, leaving a list of pertinent words or descriptors. Each patent is associated to the descriptors found in the selected document. Further, in the process of clusterisation, these descriptors are used as subsets, in which the patent are regrouped or as tags to place the patents in predetermined categories, for example keywords from International Patent Classifications. Four text parts can be processed with text-mining : Title Abstract Claim Patent Full-Text Software offer different combinations but title, abstract and claim are generally the most used, providing a good balance between interferences and relevancy. === Advantages === Text-mining can be used to narrow a search or quickly evaluate a patent corpus. For instance, if a query produces irrelevant documents, a multi-level clustering hierarchy identifies them in order to delete them and refine the search. Text-mining can also be used to create internal taxonomies specific to a corpus for possible mapping. == Visualisations == Allying patent analysis and informatic tools offers an overview of the environment through value-added visualisations. As patents contain structured and unstructured information, visualisations fall in two categories. Structured data can be rendered with data mining in macrothematic maps and statistical analysis. Unstructured information can be shown in like clouds, cluster maps and 2D keyword maps. === Data mining visualisation === === Text mining visualisation === === Visualisation for both data-mining and text-mining === Mapping visualisations can be used for both text-mining and data-mining results. == Uses == What patent visualisation can highlight: Competitors Partners New innovations Technologic environment description Networks Field application: R&D strategy management Competitive intelligence Licensing Strategy

  Read more →
• 

  Multimodal representation learning

  Multimodal representation learning is a subfield of representation learning focused on integrating and interpreting information from different modalities, such as text, images, audio, or video, by projecting them into a shared latent space. This allows for semantically similar content across modalities to be mapped to nearby points within that space, facilitating a unified understanding of diverse data types. By automatically learning meaningful features from each modality and capturing their inter-modal relationships, multimodal representation learning enables a unified representation that enhances performance in cross-media analysis tasks such as video classification, event detection, and sentiment analysis. It also supports cross-modal retrieval and translation, including image captioning, video description, and text-to-image synthesis. == Motivation == The primary motivations for multimodal representation learning arise from the inherent nature of real-world data and the limitations of unimodal approaches. Since multimodal data offers complementary and supplementary information about an object or event from different perspectives, it is more informative than relying on a single modality. A key motivation is to narrow the heterogeneity gap that exists between different modalities by projecting their features into a shared semantic subspace. This allows semantically similar content across modalities to be represented by similar vectors, facilitating the understanding of relationships and correlations between them. Multimodal representation learning aims to leverage the unique information provided by each modality to achieve a more comprehensive and accurate understanding of concepts. These unified representations are crucial for improving performance in various cross-media analysis tasks such as video classification, event detection, and sentiment analysis. They also enable cross-modal retrieval, allowing users to search and retrieve content across different modalities. Additionally, it facilitates cross-modal translation, where information can be converted from one modality to another, as seen in applications like image captioning and text-to-image synthesis. The abundance of ubiquitous multimodal data in real-world applications, including understudied areas like healthcare, finance, and human-computer interaction (HCI), further motivates the development of effective multimodal representation learning techniques. == Approaches and methods == === Canonical-correlation analysis based methods === Canonical-correlation analysis (CCA) was first introduced in 1936 by Harold Hotelling and is a fundamental approach for multimodal learning. CCA aims to find linear relationships between two sets of variables. Given two data matrices X ∈ R n × p {\displaystyle X\in \mathbb {R} ^{n\times p}} and Y ∈ R n × q {\displaystyle Y\in \mathbb {R} ^{n\times q}} representing different modalities, CCA finds projection vectors w x ∈ R p {\displaystyle w_{x}\in \mathbb {R} ^{p}} and w y ∈ R q {\displaystyle w_{y}\in \mathbb {R} ^{q}} that maximizes the correlation between the projected variables: ρ = max w x , w y w x ⊤ Σ x y w y w x ⊤ Σ x x w x w y ⊤ Σ y y w y {\displaystyle \rho =\max _{w_{x},w_{y}}{\frac {w_{x}^{\top }\Sigma _{xy}w_{y}}{{\sqrt {w_{x}^{\top }\Sigma _{xx}w_{x}}}{\sqrt {w_{y}^{\top }\Sigma _{yy}w_{y}}}}}} such that Σ x x {\displaystyle \Sigma _{xx}} and Σ y y {\displaystyle \Sigma _{yy}} are the within-modality covariance matrices, and Σ x y {\displaystyle \Sigma _{xy}} is the between-modality covariance matrix. However, standard CCA is limited by its linearity, which led to the development of nonlinear extensions, such as kernel CCA and deep CCA. ==== Kernel CCA ==== Kernel canonical correlation analysis (KCCA) extends traditional CCA to capture nonlinear relationships between modalities by implicitly mapping the data into high dimensional feature spaces using kernel functions. Given kernel functions K x {\displaystyle K_{x}} and K y {\displaystyle K_{y}} with corresponding Gram matrices K x ∈ R n × n {\displaystyle K_{x}\in \mathbb {R} ^{n\times n}} and K y ∈ R n × n {\displaystyle K_{y}\in \mathbb {R} ^{n\times n}} , KCCA seeks coefficients α {\displaystyle \alpha } and β {\displaystyle \beta } that maximize: ρ = max α , β α ⊤ K x K y β α ⊤ K x 2 α β ⊤ K y 2 β {\displaystyle \rho =\max _{\alpha ,\beta }{\frac {\alpha ^{\top }K_{x}Ky\beta }{{\sqrt {\alpha ^{\top }K_{x}^{2}\alpha }}{\sqrt {\beta ^{\top }K_{y}^{2}\beta }}}}} To prevent overfitting, regularization terms are typically added, resulting in: ρ = max α , β α T K x K y β α T ( K x 2 + λ x K x ) α β T ( K y 2 + λ y K y ) β {\displaystyle \rho =\max _{\alpha ,\beta }{\frac {\alpha ^{T}K_{x}K_{y}\beta }{{\sqrt {\alpha ^{T}\left(K_{x}^{2}+\lambda _{x}K_{x}\right)\alpha }}{\sqrt {\;\beta ^{T}\left(K_{y}^{2}+\lambda _{y}K_{y}\right)\beta }}}}} where λ x {\displaystyle \lambda _{x}} and λ y {\displaystyle \lambda _{y}} are regularization parameters. KCCA has proven effective for tasks such as cross-modal retrieval and semantic analysis, though it faces computational challenges with large datasets due to its O ( n 2 ) {\displaystyle O(n^{2})} memory requirement for sorting kernel matrices. KCCA was proposed independently by several researchers. ==== Deep CCA ==== Deep canonical correlation analysis (DCCA), introduced in 2013, employs neural networks to learn nonlinear transformations for maximizing the correlation between modalities. DCCA uses separate neural networks f x {\displaystyle f_{x}} and f y {\displaystyle f_{y}} for each modality to transform the original data before applying CCA: max W x , W y , θ x , θ y corr ⁡ ( f x ( X ; θ x ) , f y ( Y ; θ y ) ) {\displaystyle \max _{W_{x},W_{y},\theta _{x},\theta _{y}}\operatorname {corr} \left(f_{x}(X;\theta _{x}),f_{y}(Y;\theta _{y})\right)} where θ x {\displaystyle \theta _{x}} and θ y {\displaystyle \theta _{y}} represent the parameters of the neural networks, and W x {\displaystyle W_{x}} and W y {\displaystyle W_{y}} are the CCA projection matrices. The correlation objective is computed as: corr ⁡ ( H x , H y ) = tr ⁡ ( T − 1 / 2 H x T H y S − 1 / 2 ) {\displaystyle \operatorname {corr} (H_{x},H_{y})=\operatorname {tr} \left(T^{-1/2}H_{x}^{T}H_{y}S^{-1/2}\right)} where H x = f x ( X ) {\displaystyle H_{x}=f_{x}(X)} and H y = f y ( Y ) {\displaystyle H_{y}=f_{y}(Y)} are the network outputs, T = H x T H x + r x I {\displaystyle T=H_{x}^{T}H_{x}+r_{x}I} , S = H y T H y + r y I {\displaystyle S=H_{y}^{T}H_{y}+r_{y}I} and r x , r y {\displaystyle r_{x},r_{y}} are the regularization parameters. DCCA overcomes the limitations of linear CCA and kernel CCA by learning complex nonlinear relationships while maintaining computational efficiency for large datasets through mini-batch optimization. === Graph-based methods === Graph-based approaches for multimodal representation learning leverage graph structure to model relationships between entities across different modalities. These methods typically represent each modality as a graph and then learn embedding that preserve cross-modal similarities, enabling more effective joint representation of heterogeneous data. One such method is cross-modal graph neural networks (CMGNNs) that extend traditional graph neural networks (GNNs) to handle data from multiple modalities by constructing graphs that capture both intra-modal and inter-modal relationships. These networks model interactions across modalities by representing them as nodes and their relationships as edges. Other graph-based methods include Probabilistic Graphical Models (PGMs) such as deep belief networks (DBN) and deep Boltzmann machines (DBM). These models can learn a joint representation across modalities, for instance, a multimodal DBN achieves this by adding a shared restricted Boltzmann Machine (RBM) hidden layer on top of modality-specific DBNs. Additionally, the structure of data in some domains like Human-Computer Interaction (HCI), such as the view hierarchy of app screens, can potentially be modeled using graph-like structures. The field of graph representation learning is also relevant, with ongoing progress in developing evaluation benchmarks. === Diffusion maps === Another set of methods relevant to multimodal representation learning are based on diffusion maps and their extensions to handle multiple modalities. ==== Multi-view diffusion maps ==== Multi-view diffusion maps address the challenge of achieving multi-view dimensionality reduction by effectively utilizing the availability of multiple views to extract a coherent low-dimensional representation of the data. The core idea is to exploit both the intrinsic relations within each view and the mutual relations between the different views, defining a cross-view model where a random walk process implicitly hops between objects in different views. A multi-view kernel matrix is constructed by combining these relations, defining a cross-view diffusion process and associ

  Read more →
• 

  Aporia (company)

  Aporia is a machine learning observability platform based in Tel Aviv, Israel. The company has a US office located in San Jose, California. Aporia has developed software for monitoring and controlling undetected defects and failures used by other companies to detect and report anomalies, and warn in the early stages of faults. == History == Aporia was founded in 2019 by Liran Hason and Alon Gubkin. In April 2021, the company raised a $5 million seed round for its monitoring platform for ML models. In February 2022, the company closed a Series A round of $25 million for its ML observability platform. Aporia was named by Forbes as the Next Billion-Dollar Company in June 2022. In November, the company partnered with ClearML, an MLOPs platform, to improve ML pipeline optimization. In January 2023, Aporia launched Direct Data Connectors, a novel technology allowing organizations to monitor their ML models in minutes (previously the process of integrating ML monitoring into a customer’s cloud environment took weeks or more.) DDC (Direct Data Connectors) enables users to connect Aporia to their preferred data source and monitor all of their data at once, without data sampling or data duplication (which is a huge security risk for major organizations. In April 2023, Aporia announced the company partnered with Amazon Web Services (AWS) to provide more reliable ML observability to AWS consumers by deploying Aporia's architecture to their AWS environment, this will allow customers to monitor their models in production regardless of platform.

  Read more →
• 

  Bag-of-words model

  The bag-of-words (BoW) model is a model of text which uses an unordered collection (a "bag") of words. It is used in natural language processing and information retrieval (IR). It disregards word order (and thus most of syntax or grammar) but captures multiplicity. The bag-of-words model is commonly used in methods of document classification where, for example, the (frequency of) occurrence of each word is used as a feature for training a classifier. It has also been used for computer vision. An early reference to "bag of words" in a linguistic context can be found in Zellig Harris's 1954 article on Distributional Structure. == Definition == The following models a text document using bag-of-words. Here are two simple text documents: Based on these two text documents, a list is constructed as follows for each document: Representing each bag-of-words as a JSON object, and attributing to the respective JavaScript variable: Each key is the word, and each value is the number of occurrences of that word in the given text document. The order of elements is free, so, for example {"too":1,"Mary":1,"movies":2,"John":1,"watch":1,"likes":2,"to":1} is also equivalent to BoW1. It is also what we expect from a strict JSON object representation. Note: if another document is like a union of these two, its JavaScript representation will be: So, as we see in the bag algebra, the "union" of two documents in the bags-of-words representation is, formally, the disjoint union, summing the multiplicities of each element. === Word order === The BoW representation of a text removes all word ordering. For example, the BoW representation of "man bites dog" and "dog bites man" are the same, so any algorithm that operates with a BoW representation of text must treat them in the same way. Despite this lack of syntax or grammar, BoW representation is fast and may be sufficient for simple tasks that do not require word order. For instance, for document classification, if the words "stocks" "trade" "investors" appears multiple times, then the text is likely a financial report, even though it would be insufficient to distinguish between Yesterday, investors were rallying, but today, they are retreating.andYesterday, investors were retreating, but today, they are rallying.and so the BoW representation would be insufficient to determine the detailed meaning of the document. == Implementations == Implementations of the bag-of-words model might involve using frequencies of words in a document to represent its contents. The frequencies can be "normalized" by the inverse of document frequency, or tf–idf. Additionally, for the specific purpose of classification, supervised alternatives have been developed to account for the class label of a document. Lastly, binary (presence/absence or 1/0) weighting is used in place of frequencies for some problems (e.g., this option is implemented in the WEKA machine learning software system). == Hashing trick == A common alternative to using dictionaries is the hashing trick, where words are mapped directly to indices with a hash function. When using a hash function, no memory is required to store a dictionary. In practice, hashing simplifies the implementation of bag-of-words models and improves scalability. Collisions can occur when two words are hashed to the same index, but this happens infrequently and may function as a form of regularization.

  Read more →
• 

  Cyclodisparity

  In vision science, cyclodisparity is the difference in the rotation angle of an object or scene viewed by the left and right eyes. Cyclodisparity can result from the eyes' torsional rotation (cyclorotation) or can be created artificially by presenting to the eyes two images that need to be rotated relative to each other for binocular fusion to take place. == Human and animal vision == The eyes and visual system can compensate for cyclodisparity up to a certain point; if the cyclodisparity is larger than a threshold, the images cannot be fused, resulting stereoblindness, and in double vision in subjects who otherwise have full stereo vision. When a human subject is presented with images that have artificial cyclodisparity, cyclovergence is evoked, that is, a motor response of the eye muscles that rotates the two eyes in opposite directions, thereby reducing cyclodisparity. Visually-induced cyclovergence of up to 8 degrees has been observed in normal subjects. Furthermore, up to about 8 degrees can usually be compensated by purely sensory means, that is, without physical eye rotation. This means that the normal human observer can achieve binocular image fusion in presence of cyclodisparity of up to approximately 16 degrees. Cyclodisparity due to images having been rotated inward can be compensated better when the gaze is directed downwards, and cyclodisparity due to an outward rotation can be compensated better when the gaze is directed upwards. A proposed explanation for this phenomenon is that the motor system is coordinated in such a way that the eyes perform a torsional movement to reduce the size of the search zones and thus the computational load required for solving the correspondence problem. The resulting cyclovergence at near gaze is smaller than the cyclovergence predicted by Listing's law. == Video processing and computer vision == Active camera torsion can be used in machine and computer vision for several purposes. For instance, camera torsion can be used to make improved use of the search range over which matching detectors or stereo matching algorithms operate, or to make a 3D slanted surface appear frontoparallel for further stereo processing. For image compression purposes, images with cyclodisparity are advantageously encoded using global motion compensation using a rotational motion model.

  Read more →
• 

  Learning curve (machine learning)

  In machine learning (ML), a learning curve (or training curve) is a graphical representation that shows how a model's performance on a training set (and usually a validation set) changes with the number of training iterations (epochs) or the amount of training data. Typically, the number of training epochs or training set size is plotted on the x-axis, and the value of the loss function (and possibly some other metric such as the cross-validation score) on the y-axis. Synonyms include error curve, experience curve, improvement curve and generalization curve. More abstractly, learning curves plot the difference between learning effort and predictive performance, where "learning effort" usually means the number of training samples, and "predictive performance" means accuracy on testing samples. Learning curves have many useful purposes in ML, including: choosing model parameters during design, adjusting optimization to improve convergence, and diagnosing problems such as overfitting (or underfitting). Learning curves can also be tools for determining how much a model benefits from adding more training data, and whether the model suffers more from a variance error or a bias error. If both the validation score and the training score converge to a certain value, then the model will no longer significantly benefit from more training data. == Formal definition == When creating a function to approximate the distribution of some data, it is necessary to define a loss function L ( f θ ( X ) , Y ) {\displaystyle L(f_{\theta }(X),Y)} to measure how good the model output is (e.g., accuracy for classification tasks or mean squared error for regression). We then define an optimization process which finds model parameters θ {\displaystyle \theta } such that L ( f θ ( X ) , Y ) {\displaystyle L(f_{\theta }(X),Y)} is minimized, referred to as θ ∗ {\displaystyle \theta ^{}} . === Training curve for amount of data === If the training data is { x 1 , x 2 , … , x n } , { y 1 , y 2 , … y n } {\displaystyle \{x_{1},x_{2},\dots ,x_{n}\},\{y_{1},y_{2},\dots y_{n}\}} and the validation data is { x 1 ′ , x 2 ′ , … x m ′ } , { y 1 ′ , y 2 ′ , … y m ′ } {\displaystyle \{x_{1}',x_{2}',\dots x_{m}'\},\{y_{1}',y_{2}',\dots y_{m}'\}} , a learning curve is the plot of the two curves i ↦ L ( f θ ∗ ( X i , Y i ) ( X i ) , Y i ) {\displaystyle i\mapsto L(f_{\theta ^{}(X_{i},Y_{i})}(X_{i}),Y_{i})} i ↦ L ( f θ ∗ ( X i , Y i ) ( X i ′ ) , Y i ′ ) {\displaystyle i\mapsto L(f_{\theta ^{}(X_{i},Y_{i})}(X_{i}'),Y_{i}')} where X i = { x 1 , x 2 , … x i } {\displaystyle X_{i}=\{x_{1},x_{2},\dots x_{i}\}} === Training curve for number of iterations === Many optimization algorithms are iterative, repeating the same step (such as backpropagation) until the process converges to an optimal value. Gradient descent is one such algorithm. If θ i ∗ {\displaystyle \theta _{i}^{}} is the approximation of the optimal θ {\displaystyle \theta } after i {\displaystyle i} steps, a learning curve is the plot of i ↦ L ( f θ i ∗ ( X , Y ) ( X ) , Y ) {\displaystyle i\mapsto L(f_{\theta _{i}^{}(X,Y)}(X),Y)} i ↦ L ( f θ i ∗ ( X , Y ) ( X ′ ) , Y ′ ) {\displaystyle i\mapsto L(f_{\theta _{i}^{}(X,Y)}(X'),Y')}

  Read more →
• 

  Statistical learning theory

  Statistical learning theory is a framework for machine learning drawing from the fields of statistics and functional analysis. Statistical learning theory deals with the statistical inference problem of finding a predictive function based on data. Statistical learning theory has led to successful applications in fields such as computer vision, speech recognition, and bioinformatics. == Introduction == The goals of learning are understanding and prediction. Learning falls into many categories, including supervised learning, unsupervised learning, online learning, and reinforcement learning. From the perspective of statistical learning theory, supervised learning is best understood. Supervised learning involves learning from a training set of data. Every point in the training is an input–output pair, where the input maps to an output. The learning problem consists of inferring the function that maps between the input and the output, such that the learned function can be used to predict the output from future input. Depending on the type of output, supervised learning problems are either problems of regression or problems of classification. If the output takes a continuous range of values, it is a regression problem. Using Ohm's law as an example, a regression could be performed with voltage as input and current as an output. The regression would find the functional relationship between voltage and current to be R {\displaystyle R} , such that V = I R {\displaystyle V=IR} Classification problems are those for which the output will be an element from a discrete set of labels. Classification is very common for machine learning applications. In facial recognition, for instance, a picture of a person's face would be the input, and the output label would be that person's name. The input would be represented by a large multidimensional vector whose elements represent pixels in the picture. After learning a function based on the training set data, that function is validated on a test set of data, data that did not appear in the training set. == Formal description == Take X {\displaystyle X} to be the vector space of all possible inputs, and Y {\displaystyle Y} to be the vector space of all possible outputs. Statistical learning theory takes the perspective that there is some unknown probability distribution over the product space Z = X × Y {\displaystyle Z=X\times Y} , i.e. there exists some unknown p ( z ) = p ( x , y ) {\displaystyle p(z)=p(\mathbf {x} ,y)} . The training set is made up of n {\displaystyle n} samples from this probability distribution, and is notated S = { ( x 1 , y 1 ) , … , ( x n , y n ) } = { z 1 , … , z n } {\displaystyle S=\{(\mathbf {x} _{1},y_{1}),\dots ,(\mathbf {x} _{n},y_{n})\}=\{\mathbf {z} _{1},\dots ,\mathbf {z} _{n}\}} Every x i {\displaystyle \mathbf {x} _{i}} is an input vector from the training data, and y i {\displaystyle y_{i}} is the output that corresponds to it. In this formalism, the inference problem consists of finding a function f : X → Y {\displaystyle f:X\to Y} such that f ( x ) ∼ y {\displaystyle f(\mathbf {x} )\sim y} . Let H {\displaystyle {\mathcal {H}}} be a space of functions f : X → Y {\displaystyle f:X\to Y} called the hypothesis space. The hypothesis space is the space of functions the algorithm will search through. Let V ( f ( x ) , y ) {\displaystyle V(f(\mathbf {x} ),y)} be the loss function, a metric for the difference between the predicted value f ( x ) {\displaystyle f(\mathbf {x} )} and the actual value y {\displaystyle y} . The expected risk is defined to be I [ f ] = ∫ X × Y V ( f ( x ) , y ) p ( x , y ) d x d y {\displaystyle I[f]=\int _{X\times Y}V(f(\mathbf {x} ),y)\,p(\mathbf {x} ,y)\,d\mathbf {x} \,dy} The target function, the best possible function f {\displaystyle f} that can be chosen, is given by the f {\displaystyle f} that satisfies f = argmin h ∈ H ⁡ I [ h ] {\displaystyle f=\mathop {\operatorname {argmin} } _{h\in {\mathcal {H}}}I[h]} Because the probability distribution p ( x , y ) {\displaystyle p(\mathbf {x} ,y)} is unknown, a proxy measure for the expected risk must be used. This measure is based on the training set, a sample from this unknown probability distribution. It is called the empirical risk I S [ f ] = 1 n ∑ i = 1 n V ( f ( x i ) , y i ) {\displaystyle I_{S}[f]={\frac {1}{n}}\sum _{i=1}^{n}V(f(\mathbf {x} _{i}),y_{i})} A learning algorithm that chooses the function f S {\displaystyle f_{S}} that minimizes the empirical risk is called empirical risk minimization. == Loss functions == The choice of loss function is a determining factor on the function f S {\displaystyle f_{S}} that will be chosen by the learning algorithm. The loss function also affects the convergence rate for an algorithm. It is important for the loss function to be convex. Different loss functions are used depending on whether the problem is one of regression or one of classification. === Regression === The most common loss function for regression is the square loss function (also known as the L2-norm). This familiar loss function is used in Ordinary Least Squares regression. The form is: V ( f ( x ) , y ) = ( y − f ( x ) ) 2 {\displaystyle V(f(\mathbf {x} ),y)=(y-f(\mathbf {x} ))^{2}} The absolute value loss (also known as the L1-norm) is also sometimes used: V ( f ( x ) , y ) = | y − f ( x ) | {\displaystyle V(f(\mathbf {x} ),y)=|y-f(\mathbf {x} )|} === Classification === In some sense the 0-1 indicator function is the most natural loss function for classification. It takes the value 0 if the predicted output is the same as the actual output, and it takes the value 1 if the predicted output is different from the actual output. For binary classification with Y = { − 1 , 1 } {\displaystyle Y=\{-1,1\}} , this is: V ( f ( x ) , y ) = θ ( − y f ( x ) ) {\displaystyle V(f(\mathbf {x} ),y)=\theta (-yf(\mathbf {x} ))} where θ {\displaystyle \theta } is the Heaviside step function. == Regularization == In machine learning problems, a major problem that arises is that of overfitting. Because learning is a prediction problem, the goal is not to find a function that most closely fits the (previously observed) data, but to find one that will most accurately predict output from future input. Empirical risk minimization runs this risk of overfitting: finding a function that matches the data exactly but does not predict future output well. Overfitting is symptomatic of unstable solutions; a small perturbation in the training set data would cause a large variation in the learned function. It can be shown that if the stability for the solution can be guaranteed, generalization and consistency are guaranteed as well. Regularization can solve the overfitting problem and give the problem stability. Regularization can be accomplished by restricting the hypothesis space H {\displaystyle {\mathcal {H}}} . A common example would be restricting H {\displaystyle {\mathcal {H}}} to linear functions: this can be seen as a reduction to the standard problem of linear regression. H {\displaystyle {\mathcal {H}}} could also be restricted to polynomial of degree p {\displaystyle p} , exponentials, or bounded functions on L1. Restriction of the hypothesis space avoids overfitting because the form of the potential functions are limited, and so does not allow for the choice of a function that gives empirical risk arbitrarily close to zero. One example of regularization is Tikhonov regularization. This consists of minimizing 1 n ∑ i = 1 n V ( f ( x i ) , y i ) + γ ‖ f ‖ H 2 {\displaystyle {\frac {1}{n}}\sum _{i=1}^{n}V(f(\mathbf {x} _{i}),y_{i})+\gamma \left\|f\right\|_{\mathcal {H}}^{2}} where γ {\displaystyle \gamma } is a fixed and positive parameter, the regularization parameter. Tikhonov regularization ensures existence, uniqueness, and stability of the solution. == Bounding empirical risk == Consider a binary classifier f : X → { 0 , 1 } {\displaystyle f:{\mathcal {X}}\to \{0,1\}} . We can apply Hoeffding's inequality to bound the probability that the empirical risk deviates from the true risk to be a Sub-Gaussian distribution. P ( | R ^ ( f ) − R ( f ) | ≥ ϵ ) ≤ 2 e − 2 n ϵ 2 {\displaystyle \mathbb {P} (|{\hat {R}}(f)-R(f)|\geq \epsilon )\leq 2e^{-2n\epsilon ^{2}}} But generally, when we do empirical risk minimization, we are not given a classifier; we must choose it. Therefore, a more useful result is to bound the probability of the supremum of the difference over the whole class. P ( sup f ∈ F | R ^ ( f ) − R ( f ) | ≥ ϵ ) ≤ 2 S ( F , n ) e − n ϵ 2 / 8 ≈ n d e − n ϵ 2 / 8 {\displaystyle \mathbb {P} {\bigg (}\sup _{f\in {\mathcal {F}}}|{\hat {R}}(f)-R(f)|\geq \epsilon {\bigg )}\leq 2S({\mathcal {F}},n)e^{-n\epsilon ^{2}/8}\approx n^{d}e^{-n\epsilon ^{2}/8}} where S ( F , n ) {\displaystyle S({\mathcal {F}},n)} is the shattering number and n {\displaystyle n} is the number of samples in your dataset. The exponential term comes from Hoeffding but there is an extra cost of taking the supremum over the whole cla

  Read more →