AI Assistant Maker

AI Assistant Maker — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Hard sigmoid

  In artificial intelligence, especially computer vision and artificial neural networks, a hard sigmoid is non-smooth function used in place of a sigmoid function. These retain the basic shape of a sigmoid, rising from 0 to 1, but using simpler functions, especially piecewise linear functions or piecewise constant functions. These are preferred where speed of computation is more important than precision. == Examples == The most extreme examples are the sign function or Heaviside step function, which go from −1 to 1 or 0 to 1 (which to use depends on normalization) at 0. Other examples include the Theano library, which provides two approximations: ultra_fast_sigmoid, which is a multi-part piecewise approximation and hard_sigmoid, which is a 3-part piecewise linear approximation (output 0, line with slope 0.2, output 1).

  Read more →
• 

  Radar geo-warping

  Radar geo-warping is the adjustment of geo-referenced radar images and video data to be consistent with a geographical projection. This image warping avoids any restrictions when displaying it together with video from multiple radar sources or with other geographical data including scanned maps and satellite images which may be provided in a particular projection. There are many areas where geo warping has unique benefits: Single radar video signal displayed together with maps of different geographical projections. E.g. Mercator UTM stereographic Multiple radar video signals displayed simultaneously: Having the computing power to do so on one computer. Adapting the projection of all radar signals allowing the geographically correct display and accurate superimposition of those videos. Slant range correction: a modern 3D radar system can measure the height of a target and hence it is possible to correct the radar video by the real corrected range of the target. Slant Range Correction also allows to compensate the radar tower height e.g. for maritime surveillance radars. == Introduction == Radar video presents the echoes of electromagnetic waves a radar system has emitted and received as reflections afterwards. These echoes are typically presented on a computer screen with a color-coding scheme depicting the reflection strength. Two problems have to be solved during such a visualization process. The first problem arises from the fact that typically the radar antenna turns around its position and measures the reflection echo distances from its position in one direction. This effectively means that the radar video data are present in polar coordinates. In older systems the polar oriented picture has been displayed in so called plan position indicators (PPI). The PPI-scope uses a radial sweep pivoting about the center of the presentation. This results in a map-like picture of the area covered by the radar beam. A long-persistence screen is used so that the display remains visible until the sweep passes again. Bearing to the target is indicated by the target's angular position in relation to an imaginary line extending vertically from the sweep origin to the top of the scope. The top of the scope is either true north (when the indicator is operated in the true bearing mode) or ship's heading (when the indicator is operated in the relative bearing mode). For visualization on a modern computer screen the polar coordinates have to be converted into Cartesian coordinates. This process called radar scan conversion is presented with more detail in the next section. The second problem to solve arises from the fact that a radar system is placed in the real world and measures real world echo positions. These echoes have to be displayed together with other real world data like object positions, vector maps and satellite images in a consistent way. All this information refers to the curved earth surface but is displayed on a flat computer display. Building a link from real world earth positions to display pixels is commonly called geographical referencing or in short geo-referencing. Part of the geo-referencing process is to map the 3D earth surface onto a 2D display. This process of a geographical projection can be performed in many ways, but different data sources have their own 'natural' projection. E.g. Cartesian radar video data from a radar source on the earth surface are geo-referenced by a so-called radar projection. When using this radar projection the Cartesian radar video pixels can directly displayed on a computer screen (only being linearly transformed according to the current position on the screen and e.g. the current zoom level). A problem now arises if e.g. also a satellite map shall be shown together with the radar video data. The 'natural' geographical projection of a satellite image would be a satellite projection which depends on the satellite orbit, position and further parameters. Now either the satellite image has to be reprojected to a radar projection or the radar video has to use the satellite projection. This geographical re-projection is also called geographical warping or Geo Warping where each image pixel has to be transformed from one projection into another. This article describes in further detail the Geo Warping of radar video images in real time. It will also show that radar video Geo Warping is done most efficiently when it is integrated with the radar scan conversion process. == Radar-scan conversion == This section describes the principles of the radar-scan conversion (RSC) process. The radar supplies its measured data in polar coordinates (ρ,θ) directly from the rotating antenna. ρ defines the target/echo distance and θ the target angle in polar world coordinates. These data are measured, digitized and stored in a polar coordinate polar store or polar pixmap. The main RSC task is to convert these data to Cartesian (x, y) display coordinates, creating the necessary display pixels. The RSC process is influenced by the current zoom, shift and rotation settings defining which part of the 'world' shall be visible in the display image. As detailed later the RSC process also takes the currently used geographical projection into account when the radar video images are Geo Warped. The OpenGL RSC is implemented using a reverse scan conversion approach which calculates for every image pixel the most appropriate radar amplitude value in the polar store. This approach generates an optimal image without any artifacts known from forward spoke fill algorithms. By applying bi-linear filtering between adjacent pixels in the polar store during the conversion process the OpenGL RSC finally achieves a very high visual quality radar display image for every zoom level, creating smooth images of the radar echoes. == Radar projection == This section illustrates how radar video data are geo referenced and displayed on a computer screen. The radar sensor is positioned on the earth surface with a height h above the ground. It measures the direct distance d to the target (and not e.g. the distance the target is away from the radar if one would move on the earth surface). This distance is then used in the display plane after adjustment to the current display zoom level by the radar scan converter (RSC). Now it has to be clarified how the radar video data is geo referenced. This basically means, that if we want to display a geographical real world object (like e.g. a light house) which is at the same real world position as the radar target, that it also shall appear at the same position in the display plane. This is realized by calculating the distance from the radar sensor to the respective real world object and use that distance in the display plane. The position of the real world object is typically given in geographical coordinates (latitude, longitude and height above the earth surface). In other words, using a radar projection with geographical data is done by simulating a radar measurement process with the real world objects and use the resulting range and azimuth in the display plane. The second picture to the right shows an example radar projection with the center of projection (COP) at latitude 50.0° and longitude 0.0° which is also the radar position. The dashed lines are the equal-latitude and equal-longitude lines on top of the background map. The solid lines show equal-range and equal-azimuth with the respect to the radar position. It is a feature of the radar projection that equal-range lines are circles and equal-azimuth lines are straight lines. This is necessary to display radar video consistently with other map data when using a radar projection where the projection center has to be the radar position. == Geo Warping process == This section explains the actual geo warping or re-projection process when applied to radar video in real time. Assume we want to display radar video on top of a satellite image. As an example we use the CIB projection which is used to display satellite data in CIB (Controlled Image Base) format. The Figure Geo Warping Radar to CIB Projection shows dashed the maximal range circle for a range of 111 km or 60 miles using the radar projection. Such a range is typical for long range coastal surveillance radars. As stated in the last section this is a perfect circle also on the computer screen. The solid line ellipse shows the same range circle for the CIB projection. Typically the errors occurring without Geo Warping are smallest near the radar position if at least the projection center (COP) coincides with the radar position, as realized in our example. Otherwise the error distribution depends both on the used projection and also on the projection parameters. Thus, in our case the errors are most significant near the maximum radar range. The CIB projection error corrected in east–west direction at half the radar range is 2.6 km and is 5.3 km at the full radar range of 111 km. An error of 5.3 km is

  Read more →
• 

  Couch to 5K

  Couch to 5K, abbreviated C25K, is an exercise plan that gradually progresses from beginner running toward a 5 kilometre (3.1 mile) run over nine weeks. == Operations == The Couch to 5K running plan, also known as C25K, created by Josh Clark in 1996, was developed with the expectation of creating a plan for new runners to start running. The plan is aimed to have users work out for 20 to 30 minutes, three days a week. Within the program, users can be expected to perform different tasks such as intervals of running with period of short walks in between to help build endurance in the weeks up to the final goal of a 5K run. During the nine weeks leading up to the race, the runner will learn to set their own pace and where their strengths and weaknesses are within running. Often, the daily workouts start with a five-minute warm-up walk and works up to running five kilometres without a walking break within nine weeks. Users are not expected to have any experience in running and can be some of the first running that they ever do. The main goal is to turn that unexperienced runner into someone who can run a 5K. Clark started the website Kick and featured C25K on the site. In 2001, Kick merged with Cool Running, a New England–based running site. Clark later sold his stake in Cool Running and the Couch to 5K program. Cool Running was absorbed into Active.com, operated by Active Network, LLC. Active Network provides mobile apps for Couch to 5K, as well as 5K to 10K, a follow-up program. The NHS in the UK provides downloadable podcasts and a smartphone app (Android and iOS) for the plan. A mobile app, created by Zen Labs, has training plans that are based on the Couch to 5K running plan from CoolRunning.com. It is one of the highest-rated health and fitness apps available on Android and iOS. As of 2016, the C25K app has been used by over 5 million people.

  Read more →
• 

  Control system

  A control system manages, commands, directs, or regulates the behavior of other devices or systems using control loops. It can range from a single home heating controller using a thermostat controlling a domestic boiler to large industrial control systems which are used for controlling processes or machines. The control systems are designed via control engineering process. For continuously modulated control, a feedback controller is used to automatically control a process or operation. The control system compares the value or status of the process variable (PV) being controlled with the desired value or setpoint (SP), and applies the difference as a control signal to bring the process variable output of the plant to the same value as the setpoint. For sequential and combinational logic, software logic, such as in a programmable logic controller, is used. == Open-loop and closed-loop control == == Feedback control systems == == Logic control == Logic control systems for industrial and commercial machinery were historically implemented by interconnected electrical relays and cam timers using ladder logic. Today, most such systems are constructed with microcontrollers or more specialized programmable logic controllers (PLCs). The notation of ladder logic is still in use as a programming method for PLCs. Logic controllers may respond to switches and sensors and can cause the machinery to start and stop various operations through the use of actuators. Logic controllers are used to sequence mechanical operations in many applications. Examples include elevators, washing machines and other systems with interrelated operations. An automatic sequential control system may trigger a series of mechanical actuators in the correct sequence to perform a task. For example, various electric and pneumatic transducers may fold and glue a cardboard box, fill it with the product and then seal it in an automatic packaging machine. PLC software can be written in many different ways – ladder diagrams, SFC (sequential function charts) or statement lists. == On–off control == On–off control uses a feedback controller that switches abruptly between two states. A simple bi-metallic domestic thermostat can be described as an on-off controller. When the temperature in the room (PV) goes below the user setting (SP), the heater is switched on. Another example is a pressure switch on an air compressor. When the pressure (PV) drops below the setpoint (SP) the compressor is powered. Refrigerators and vacuum pumps contain similar mechanisms. Simple on–off control systems like these can be cheap and effective. == Linear control == == Fuzzy logic == Fuzzy logic is an attempt to apply the easy design of logic controllers to the control of complex continuously varying systems. Basically, a measurement in a fuzzy logic system can be partly true. The rules of the system are written in natural language and translated into fuzzy logic. For example, the design for a furnace would start with: "If the temperature is too high, reduce the fuel to the furnace. If the temperature is too low, increase the fuel to the furnace." Measurements from the real world (such as the temperature of a furnace) are fuzzified and logic is calculated arithmetic, as opposed to Boolean logic, and the outputs are de-fuzzified to control equipment. When a robust fuzzy design is reduced to a single, quick calculation, it begins to resemble a conventional feedback loop solution and it might appear that the fuzzy design was unnecessary. However, the fuzzy logic paradigm may provide scalability for large control systems where conventional methods become unwieldy or costly to derive. Fuzzy electronics is an electronic technology that uses fuzzy logic instead of the two-value logic more commonly used in digital electronics. == Physical implementation == The range of control system implementation is from compact controllers often with dedicated software for a particular machine or device, to distributed control systems for industrial process control for a large physical plant. Logic systems and feedback controllers are usually implemented with programmable logic controllers. The Broadly Reconfigurable and Expandable Automation Device (BREAD) is a recent framework that provides many open-source hardware devices which can be connected to create more complex data acquisition and control systems.

  Read more →
• 

  Web Intents

  Web Intents was an experimental framework for web-based inter-application communication and service discovery. Web Intents consists of a discovery mechanism and a very light-weight RPC system between web applications, modelled after the Intents system in Android. In the context of the framework an Intent equals an action to be performed by a provider. Web Intents allow two web applications to communicate with each other, without either of them having to actually know what the other one is. == Support == === Client === Google Chrome versions 18 to 23 natively supported Web Intents. This support was disabled in version 24, citing the existence of a "number of areas for development in both the API and specific user experience in Chrome". There is a JavaScript shim with support for IE 8, IE 9, Opera, Safari, Firefox 3+ and Chrome 3+. === Server === There are some Web Intents proxy pages that make available some real services that don't yet support intents. AddThis supports Web Intents by their sharing tools regardless of browser support. == History == Paul Kinlan of Google announced the Web Intents project in December 2010. He soon released a prototype API to GitHub. In August 2011 Google announced that Chrome would support Web Intents. Google and Mozilla have started co-operating to unify Web Intents and Mozilla's Web Activities (which tries to solve the same problem) into one proposal. In November 2012, Greg Billock of Google announced that experimental support of Web Intents had been removed from Chrome.

  Read more →
• 

  Network Abstraction Layer

  The Network Abstraction Layer (NAL) is a part of the H.264/AVC and HEVC video coding standards. The main goal of the NAL is the provision of a "network-friendly" video representation addressing "conversational" (video telephony) and "non conversational" (storage, broadcast, or streaming) applications. NAL has achieved a significant improvement in application flexibility relative to prior video coding standards. == Introduction == An increasing number of services and growing popularity of high definition TV are creating greater needs for higher coding efficiency. Moreover, other transmission media such as cable modem, xDSL, or UMTS offer much lower data rates than broadcast channels, and enhanced coding efficiency can enable the transmission of more video channels or higher quality video representations within existing digital transmission capacities. Video coding for telecommunication applications has diversified from ISDN and T1/E1 service to embrace PSTN, mobile wireless networks, and LAN/Internet network delivery. Throughout this evolution, continued efforts have been made to maximize coding efficiency while dealing with the diversification of network types and their characteristic formatting and loss/error robustness requirements. The H.264/AVC and HEVC standards are designed for technical solutions including areas like broadcasting (over cable, satellite, cable modem, DSL, terrestrial, etc.) interactive or serial storage on optical and magnetic devices, conversational services, video-on-demand or multimedia streaming, multimedia messaging services, etc. Moreover, new applications may be deployed over existing and future networks. This raises the question about how to handle this variety of applications and networks. To address this need for flexibility and customizability, the design covers a NAL that formats the Video Coding Layer (VCL) representation of the video and provides header information in a manner appropriate for conveyance by a variety of transport layers or storage media. The NAL is designed in order to provide "network friendliness" to enable simple and effective customization of the use of VCL for a broad variety of systems. The NAL facilitates the ability to map VCL data to transport layers such as: RTP/IP for any kind of real-time wire-line and wireless Internet services. File formats, e.g., ISO MP4 for storage and MMS. H.32X for wireline and wireless conversational services. MPEG-2 systems for broadcasting services, etc. The full degree of customization of the video content to fit the needs of each particular application is outside the scope of the video coding standardization effort, but the design of the NAL anticipates a variety of such mappings. Some key concepts of the NAL are NAL units, byte stream, and packet formats uses of NAL units, parameter sets, and access units. A short description of these concepts is given below. == NAL units == The coded video data is organized into NAL units, each of which is effectively a packet that contains an integer number of bytes. The first byte of each H.264/AVC NAL unit is a header byte that contains an indication of the type of data in the NAL unit. For HEVC the header was extended to two bytes. All the remaining bytes contain payload data of the type indicated by the header. The NAL unit structure definition specifies a generic format for use in both packet-oriented and bitstream-oriented transport systems, and a series of NAL units generated by an encoder is referred to as a NAL unit stream. == NAL Units in Byte-Stream Format Use == Some systems require delivery of the entire or partial NAL unit stream as an ordered stream of bytes or bits within which the locations of NAL unit boundaries need to be identifiable from patterns within the coded data itself. For use in such systems, the H.264/AVC and HEVC specifications define a byte stream format. In the byte stream format, each NAL unit is prefixed by a specific pattern of three bytes called a start code prefix. The boundaries of the NAL unit can then be identified by searching the coded data for the unique start code prefix pattern. The use of emulation prevention bytes guarantees that start code prefixes are unique identifiers of the start of a new NAL unit. A small amount of additional data (one byte per video picture) is also added to allow decoders that operate in systems that provide streams of bits without alignment to byte boundaries to recover the necessary alignment from the data in the stream. Additional data can also be inserted in the byte stream format that allows expansion of the amount of data to be sent and can aid in achieving more rapid byte alignment recovery, if desired. == NAL Units in Packet-Transport System Use == In other systems (e.g., IP/RTP systems), the coded data is carried in packets that are framed by the system transport protocol, and identification of the boundaries of NAL units within the packets can be established without use of start code prefix patterns. In such systems, the inclusion of start code prefixes in the data would be a waste of data carrying capacity, so instead the NAL units can be carried in data packets without start code prefixes. == VCL and Non-VCL NAL Units == NAL units are classified into VCL and non-VCL NAL units. VCL NAL units contain the data that represents the values of the samples in the video pictures. Non-VCL NAL units contain any associated additional information such as parameter sets (important header data that can apply to a large number of VCL NAL units) and supplemental enhancement information (timing information and other supplemental data that may enhance usability of the decoded video signal but are not necessary for decoding the values of the samples in the video pictures). == Parameter Sets == A parameter set contains shared configuration data that is carried in non-VCL NAL units. Parameter sets are typically reused when decoding many coded pictures within a video sequence. Each VCL NAL unit references a picture parameter set (PPS), which in turn references a sequence parameter set (SPS). There are two types of parameter sets: Sequence parameter set (SPS), which specifies mostly constant configuration such as resolution, bit depth, or chroma format. (For a concrete implementation, see FFmpeg's SPS struct.) Picture parameter set (PPS), which applies on top of an SPS, and specifies configuration such as QP offsets. (For a concrete implementation, see FFmpeg's PPS struct.) The sequence and picture parameter-set mechanism decouples the transmission of infrequently changing information from the transmission of coded representations of the values of the samples in the video pictures. Each VCL NAL unit contains an identifier that refers to the content of the relevant picture parameter set and each picture parameter set contains an identifier that refers to the content of the relevant sequence parameter set. In this manner, a small amount of data (the identifier) can be used to refer to a larger amount of information (the parameter set) without repeating that information within each VCL NAL unit. Sequence and picture parameter sets can be sent well ahead of the VCL NAL units that they apply to, and can be repeated to provide robustness against data loss. In some applications, parameter sets may be sent within the channel that carries the VCL NAL units (termed "in-band" transmission). In other applications, it can be advantageous to convey the parameter sets "out-of-band" using a more reliable transport mechanism than the video channel itself. == Access Units == A set of NAL units in a specified form is referred to as an access unit. The decoding of each access unit results in one decoded picture. Each access unit contains a set of VCL NAL units that together compose a primary coded picture. It may also be prefixed with an access unit delimiter to aid in locating the start of the access unit. Some supplemental enhancement information containing data such as picture timing information may also precede the primary coded picture. The primary coded picture consists of a set of VCL NAL units consisting of slices or slice data partitions that represent the samples of the video picture. Following the primary coded picture may be some additional VCL NAL units that contain redundant representations of areas of the same video picture. These are referred to as redundant coded pictures, and are available for use by a decoder in recovering from loss or corruption of the data in the primary coded pictures. Decoders are not required to decode redundant coded pictures if they are present. Finally, if the coded picture is the last picture of a coded video sequence (a sequence of pictures that is independently decodable and uses only one sequence parameter set), an end of sequence NAL unit may be present to indicate the end of the sequence; and if the coded picture is the last coded picture in the entire NAL unit stream, an end of stream NAL unit may be present to

  Read more →
• 

  Robomart

  Robomart is an American technology company headquartered in Santa Monica, California that builds autonomous smart shops for cafes, ice cream parlors, and quick-service restaurants. The company’s white label platform gives retailers the option to expand their footprint at a significantly lower cost than traditional brick-and-mortar real-estate. Robomarts are equipped with a proprietary checkout-free system, temperature controlled compartments, sensors for autonomous operation, and external cameras for added security. The company licenses its technology and white label applications to retailers who manage their fleet of stores and deploy them to their consumers’ locations. After consumers have taken goods from the robomart, their order is automatically calculated, their card on file is charged and they are sent a receipt. The company has announced partnerships with Unilever, Mars, and Fatty Mart. == History == Robomart was founded by Ali Ahmed, Tigran Shahverdyan, and Emad Suhail Rahim. The company debuted at CES 2018 where it unveiled its concept of a self-driving store. At GITEX 2018 the company presented its first functional prototype of a fully driverless Robomart. At the 2019 Consumer Electronics Show the company demonstrated the technology behind its autonomous stores and checkout-free shopping experience. In January 2019, Robomart announced its first partnership with U.S. grocery chain Stop & Shop to test its driverless stores. In December 2020, Robomart deployed the Pharmacy Robomart in a trial in West Hollywood. In June 2021, the company launched its commercial service with a fleet of Pharmacy and Snacks Robomarts operating within West Hollywood and Central Hollywood. In August 2023, Robomart announced a $2 million seed round, putting its to-date funding at $3.4 million. == Partnerships == In September 2019, Robomart partnered with Avery Dennison to source the RFID tags used to enable its checkout-free shopping experience. In December 2020, Robomart partnered with Zeeba Vans to provide vehicles for its growing fleet. In June 2021, Robomart partnered with REEF Technology to provide inventory management and restocking services. In addition, REEF's Light Speed grocery division serves as the first merchant selling products through Robomart. == Products == The company currently offers three Robomart types. The frozen Robomart that stocks ice cream, the refrigerated Robomart that stocks perishable foods, and the ambient Robomart that stocks shelf-stable goods.

  Read more →
• 

  Non-separable wavelet

  Non-separable wavelets are multi-dimensional wavelets that are not directly implemented as tensor products of wavelets on some lower-dimensional space. They have been studied since 1992. They offer a few important advantages. Notably, using non-separable filters leads to more parameters in design, and consequently better filters. The main difference, when compared to the one-dimensional wavelets, is that multi-dimensional sampling requires the use of lattices (e.g., the quincunx lattice). The wavelet filters themselves can be separable or non-separable regardless of the sampling lattice. Thus, in some cases, the non-separable wavelets can be implemented in a separable fashion. Unlike separable wavelet, the non-separable wavelets are capable of detecting structures that are not only horizontal, vertical or diagonal (show less anisotropy). == Examples == Red-black wavelets Contourlets Shearlets Directionlets Steerable pyramids Non-separable schemes for tensor-product wavelets

  Read more →
• 

  Bump (application)

  Bump was an iOS and Android mobile app that enabled smartphone users to transfer contact information, photos and files between devices. In 2011, it was #8 on Apple's list of all-time most popular free iPhone apps, and by February 2013 it had been downloaded 125 million times. Its developer, Bump Technologies, shut down the service and discontinued the app on January 31, 2014, after being acquired by Google for Google Photos and Android Camera. == Features == Bump sent contact information, photos and files to another device over the internet. Before activating the transfer, each user confirmed what they want to send to the other user. To initiate a transfer, two people physically bumped their phones together. A screen appeared on both users' smartphone displays, allowing them to confirm what they want to send to each other. When two users bumped their phones, software on the phones send a variety of sensor data to an algorithm running on Bump servers, which included the location of the phone, accelerometer readings, IP address, and other sensor readings. The algorithm figured out which two phones felt the same physical bump and then transfers the information between those phones. Bump did not use Near Field Communication. February 2012 release of Bump 3.0 for iOS, the company streamlined the app to focus on its most frequently used features: contact and photo sharing. Bump 3.0 for Android maintained the features eliminated from the iOS version but moved them behind swipeable layers. In May 2012, a Bump update enabled users to transfer photos from their phone to their computer via a web service. To initiate a transfer, the user goes to the Bump website on their computer and bumps the smartphone on the computer keyboard's space bar. By December 2012, various Bump updates for iOS and Android had added the abilities to share video, audio, and any files. Users swipe to access those features. In February 2013, an update to the Bump iOS and Android apps enabled users to transfer photos, videos, contacts and other files from a computer to a smartphone and vice versa via a web service. To perform the transfer, users went to the Bump website on their computer and bump the smartphone on the computer keyboard's space bar. == History == The underlying idea of a synchronous gesture like bumping two devices for content transfer or pairing them was first conceived by Ken Hinkley of Microsoft Research in 2003. This idea was presented at a user interface and technology conference that same year. The paper proposed the use of accelerometers and a bumping gesture of two devices to enable communication, screen sharing and content transfer between them. Similar to this original concept, the idea for Bump app was conceived by David Lieb, a former employee of Texas Instruments, while he was attending the University of Chicago Booth School of Business for his MBA. While going through the orientation and meeting process of business school, he became frustrated by constantly entering contact information into his iPhone and felt that the process could be improved. His fellow Texas Instruments employees Andy Huibers and Jake Mintz, who was a classmate of Lieb's at the University of Chicago's MBA program, joined Lieb to form Bump Technologies. Bump Technologies launched in 2008 and is located in Mountain View, CA. Early funding for the project was provided by startup incubator Y Combinator, Sequoia Capital and other angel investors. It gained attention at the CTIA international wireless conference, due to its accessibility and novelty factor. In October 2009, Bump received $3.4m in Series A funding followed in January 2011 with a $16m series B financing round led by Andreessen Horowitz. Silicon Valley venture capitalist Marc Andreessen sits on the company's board. The Bump app debuted in the Apple iOS App Store in March 2009 and was “one of the apps that helped to define the iPhone” (Harry McCracken, Technologizer). It soon became the billionth download on Apple's App Store. An Android version launched in November 2009. By the time Bump 3.0 for iOS was released in February 2012, the app had been installed 77 million times, with users sharing more than 2 million photos daily. As of February 2013, there had been 125 million Bump app downloads. == Other apps created by Bump Technologies == Bump Technologies worked with PayPal in March 2010 to create a PayPal iPhone application. The application, which allows two users to automatically activate an Internet transfer of money between their accounts, found widespread adoption. A similar version was released for Android in August 2010. The Bump capability in PayPal's apps was removed in March 2012. At that time, Bump Technologies released Bump Pay, an iOS app that lets users transfer money via PayPal by physically bumping two smartphones together. The tool was originally created for the Bump team to use when splitting up restaurant bills. The payment feature was not added to the Bump app because the company “wanted to make it as simple as possible so people understand how this works,” Lieb told ABC News. Bump Pay was the first app from the company's Bump Labs initiative. A goal of Bump Labs is to test new app ideas that may not fit within the main Bump app. ING Direct added a feature to its iPhone app in 2011 that lets users transfer money to each other using Bump's technology. The feature was later added to its Android app, now called Capital One 360. In July 2012, Bump Technologies released Flock, an iPhone photo sharing app. An Android version was released in December 2012. Using geolocation data embedded in photos and a user's Facebook connections, Flock finds pictures the user takes while out with friends and family and puts everyone's photos from that event into a single shared album. Users receive a push notification after the event, asking if they want to share their photos with friends who were there in the moment. The app will also scan previous photos in the iPhone camera roll and uncover photos that have yet to be shared. If location services were enabled at the time a photo was taken, Flock allows users to create an album of photos from the past with the friends who were there with them. == Acquisition by Google == On September 16, 2013, Bump Technologies announced that it had been acquired by Google. On December 31, 2013, they broke the news that both Bump and Flock would be discontinued so that the team could focus on new projects at Google. The apps were removed from the App Store and Google Play on January 31, 2014. The company subsequently deleted all user data and shut down their servers, thus rendering existing installations of the apps inoperable.

  Read more →
• 

  Smoothing

  In statistics and image processing, to smooth a data set is to create an approximating function that attempts to capture important patterns in the data, while leaving out noise or other fine-scale structures/rapid phenomena. In smoothing, the data points of a signal are modified so individual points higher than the adjacent points (presumably because of noise) are reduced, and points that are lower than the adjacent points are increased, leading to a smoother signal. Reducing noise by smoothing may aid in data analysis in two notable ways: Help uncover more meaningful information from the underlying data, such as trends. Provide analyses that are both flexible and robust. Many different algorithms are used in smoothing, most commonly binning, kernels, and local weighted regression. == Compared to curve fitting == Smoothing may be distinguished from the related and partially overlapping concept of curve fitting in the following ways: curve fitting often involves the use of an explicit function form for the result, whereas the immediate results from smoothing are the "smoothed" values with no later use made of a functional form if there is one; the aim of smoothing is to give a general idea of relatively slow changes of value with little attention paid to the close matching of data values, while curve fitting concentrates on achieving as close a match as possible. smoothing methods often have an associated tuning parameter which is used to control the extent of smoothing. Curve fitting will adjust any number of parameters of the function to obtain the 'best' fit. == Linear smoothers == In the case that the smoothed values can be written as a linear transformation of the observed values, the smoothing operation is known as a linear smoother; the matrix representing the transformation is known as a smoother matrix or hat matrix. The operation of applying such a matrix transformation is called convolution. Thus the matrix is also called convolution matrix or a convolution kernel. In the case of simple series of data points (rather than a multi-dimensional image), the convolution kernel is a one-dimensional vector. == Algorithms == One of the most common algorithms is the "moving average", often used to try to capture important trends in repeated statistical surveys. In image processing and computer vision, smoothing ideas are used in scale space representations. The simplest smoothing algorithm is the "rectangular" or "unweighted sliding-average smooth". This method replaces each point in the signal with the average of "m" adjacent points, where "m" is a positive integer called the "smooth width". Usually m is an odd number. The triangular smooth is like the rectangular smooth except that it implements a weighted smoothing function. Some specific smoothing and filter types, with their respective uses, pros and cons are:

  Read more →
• 

  Shadow and highlight enhancement

  Shadow and highlight enhancement refers to an image processing technique used to correct exposure. The use of this technique has been gaining popularity, making its way onto magazine covers, digital media, and photos. It is, however, considered by some to be akin to other destructive Photoshop filters, such as the Watercolor filter, or the Mosaic filter. == Shadow recovery == A conservative application of the shadow/highlight tool can be very useful in recovering shadows, though it tends to leave a telltale halo around the boundary between highlight and shadow if used incorrectly. A way to avoid this is to use the bracketing technique, although this usually requires a tripod. == Highlight recovery == Recovering highlights with this tool, however, has mixed results, especially when using it on images with skin in them, and often makes people look like they have been "sprayed with fake tan". == Shadow brightening - manual == One way to brighten shadows in image editing software such as GIMP or Adobe Photoshop is to duplicate the background layer, invert the copy and set the blend modes of that top layer to "Soft Light". You can also use an inverted black and white copy of the image as a mask on a brightening layer, such as Curves or Levels. == Shadow brightening - automatic == Several automatic computer image processing-based shadow recovery and dynamic range compression methods can yield a similar effect. Some of these methods include the retinex method and homomorphic range compression. The retinex method is based on work from 1963 by Edwin Land, the founder of Polaroid. Shadow enhancement can also be accomplished using adaptive image processing algorithms such as adaptive histogram equalization or contrast limiting adaptive histogram equalization (CLAHE).

  Read more →
• 

  Video renderer

  A video renderer is software that processes a video file and sends it sequentially to the video display controller card for display on a computer screen. An example of a video renderer, is the VMR-7 that was used by Microsoft's DirectShow. An example of a UNIX video renderer is the one container within GStreamer. Commonly used video renderers are: Enhanced Video Renderer VMR9 Renderless Haali's Video Renderer Madvr Video Renderer JRVR, a part of JRiver Media Center

  Read more →
• 

  Speculative decoding

  Speculative decoding is an inference-time optimization for autoregressive large language models (LLMs) that generates multiple tokens per decoding step instead of one. A smaller draft model proposes a sequence of candidate tokens, and the larger target model verifies them in a single forward pass through a modified rejection sampling scheme. The verification preserves the target model's original output distribution, so the technique produces the same results as standard decoding while cutting latency by roughly two to three times. The name is an analogy to speculative execution in CPU design, where a processor runs instructions along a predicted branch before the outcome is known. == Background == Standard autoregressive decoding in large language models generates one token at a time. The model computes a probability distribution over its vocabulary, samples the next token, and feeds that token back as input. For large models, this process is bottlenecked by memory bandwidth rather than arithmetic throughput: loading the model's parameters from high-bandwidth memory (HBM) to the processor takes up most of the wall-clock time at each step. Because of this, a forward pass over one token and a forward pass over several tokens in a batch take roughly the same time. Speculative decoding relies on this property. == Mechanism == The technique alternates between two phases: drafting and verification. During drafting, a fast approximation model generates a short run of K candidate tokens, typically between 3 and 12. The draft model is usually a much smaller version of the target model or a lightweight auxiliary network. During verification, the target model scores the entire draft sequence in one batched forward pass. A modified rejection sampling algorithm compares the draft and target probabilities at each position. If the target model would have been at least as likely to produce a given token, that token is accepted; the first token that fails is resampled from a corrected distribution, and everything after it is thrown out. The result is that the output distribution is the same as if each token had been generated one at a time. How many tokens get accepted per cycle depends on how well the draft model matches the target. For common words and predictable continuations the match tends to be good, so the target model can confirm several tokens at once. == History == An early precursor was blockwise parallel decoding, proposed in 2018 by Stern, Shazeer, and Uszkoreit. Their method predicted multiple future tokens through auxiliary prediction heads and validated them against the autoregressive model, but it only worked with greedy decoding and did not preserve the full sampling distribution. The modern form of the technique came from Yaniv Leviathan, Matan Kalman, and Yossi Matias at Google Research, who posted "Fast Inference from Transformers via Speculative Decoding" on arXiv in November 2022. Separately and at about the same time, Charlie Chen and colleagues at DeepMind arrived at a closely related method they called speculative sampling, published in February 2023. Both papers introduced the use of rejection sampling to guarantee that the output distribution is unchanged. Leviathan et al. showed roughly 2–3x speedup on T5-XXL (11 billion parameters); Chen et al. reported 2–2.5x on the Chinchilla model (70 billion parameters). The Leviathan et al. paper was presented as an oral at the International Conference on Machine Learning in July 2023. == Variants == SpecInfer (Miao et al., 2024) uses multiple small language models to jointly build a tree of candidate continuations rather than a single chain. The target model verifies the whole tree in parallel and keeps the longest valid path, with reported speedups of 1.5–3.5x. Medusa (Cai et al., 2024) takes a different approach by not using a separate draft model at all. Extra lightweight decoding heads are attached to the target model itself, and each one predicts a token at a different future position. The candidates are evaluated through a tree-structured attention mechanism. The authors measured 2.2–3.6x speedup. EAGLE (Li et al., 2024) performs autoregression on the target model's internal feature representations (specifically the second-to-top layer) rather than on tokens directly. On LLaMA 2 Chat 70B, this gave a 2.7–3.5x latency reduction. Later versions added dynamic draft trees (EAGLE-2) and further optimizations (EAGLE-3), reaching 3–6.5x speedup. == Adoption == By 2024, speculative decoding had become a standard part of production LLM serving. Google uses it in the AI Overviews feature of Google Search. Open-source inference frameworks such as vLLM, NVIDIA's TensorRT-LLM, and SGLang all include built-in support for speculative decoding and its variants. Apple, AWS, and Meta have also published research extending the method or deploying it at scale.

  Read more →
• 

  Imaging phantom

  An imaging phantom, or simply phantom (less commonly spelled fantom), is a specially designed object that is scanned or imaged in the field of medical imaging to evaluate, analyze, and tune the performance of various imaging devices. A phantom is more readily available and provides more consistent results than the use of a living subject or cadaver, while also avoiding direct risks to living subjects. Phantoms were originally employed in 2D x-ray–based imaging techniques such as radiography or fluoroscopy, but more recently phantoms with desired imaging characteristics have been developed for 3D techniques such as SPECT, MRI, CT, ultrasound, PET, and other imaging modalities. == Design == A phantom used to evaluate an imaging device should respond in a similar manner to how human tissues and organs would act in that specific imaging modality. For instance, phantoms made for 2D radiography may hold various quantities of x-ray contrast agents with similar x-ray absorbing properties (such as the attenuation coefficient) to normal tissue to tune the contrast of the imaging device or modulate the patient's exposure to radiation. In such a case, the radiography phantom would not necessarily need to have similar textures and mechanical properties since these are not relevant in x-ray imaging modalities. However, in the case of ultrasonography, a phantom with similar rheological and ultrasound scattering properties to real tissue would be essential, but x-ray absorbing properties would not be relevant. The term "phantom" describes an object that is designed to resemble human tissue and can be evaluated, analyzed or manipulated to study the performance of a medical device. Phantoms are created using a digital file that is rendered through magnetic resonance imaging (MRI) or computer-aided design (CAD). The digital files allow for quick modifications that are read by the 3D printer. The 3D printer will create the product in successive layers using polymeric materials. There are several types of phantoms including tissue-mimicking, radiological phantoms, dental phantoms, BOMABs (used to calibrate whole-body counters), and more.

  Read more →
• 

  Video renderer

  A video renderer is software that processes a video file and sends it sequentially to the video display controller card for display on a computer screen. An example of a video renderer, is the VMR-7 that was used by Microsoft's DirectShow. An example of a UNIX video renderer is the one container within GStreamer. Commonly used video renderers are: Enhanced Video Renderer VMR9 Renderless Haali's Video Renderer Madvr Video Renderer JRVR, a part of JRiver Media Center

  Read more →