AI Assistant Maker

AI Assistant Maker — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Workplace robotics safety

Workplace robotics safety is an aspect of occupational safety and health when robots are used in the workplace. This includes traditional industrial robots as well as emerging technologies such as drone aircraft and wearable robotic exoskeletons. Types of accidents include collisions, crushing, and injuries from mechanical parts. Hazard controls include physical barriers, good work practices, and proper maintenance. == Background == Many workplace robots are industrial robots used in manufacturing. According to the International Federation of Robotics, 1.7 million new robots are expected to be used in factories between 2017 and 2020. Emerging robot technologies include collaborative robots, personal care robots, construction robots, exoskeletons, autonomous vehicles, and drone aircraft (also known as unmanned aerial vehicles or UAVs). Advances in automation technologies (e.g. fixed robots, collaborative and mobile robots, and exoskeletons) have the potential to improve work conditions but also to introduce workplace hazards in manufacturing workplaces. Fifty-six percent of robot injuries are classified as pinch injuries and 44% of injuries are classified as impact injuries. A 1987 study found that line workers are at the greatest risk, followed by maintenance workers, and programmers. Poor workplace design and human error caused most injuries. Despite the lack of occupational surveillance data on injuries associated specifically with robots, researchers from the US National Institute for Occupational Safety and Health (NIOSH) identified 61 robot-related deaths between 1992 and 2015 using keyword searches of the Bureau of Labor Statistics (BLS) Census of Fatal Occupational Injuries research database (see info from Center for Occupational Robotics Research). Using data from the Bureau of Labor Statistics, NIOSH and its state partners have investigated 4 robot-related fatalities under the Fatality Assessment and Control Evaluation Program. In addition the Occupational Safety and Health Administration (OSHA) has investigated robot-related deaths and injuries, which can be reviewed at OSHA Accident Search page. Injuries and fatalities could increase over time because of the increasing number of collaborative and co-existing robots, powered exoskeletons, and autonomous vehicles into the work environment. Safety standards are being developed by the Robotic Industries Association (RIA) in conjunction with the American National Standards Institute (ANSI). On October 5, 2017, OSHA, NIOSH and RIA signed an alliance to work together to enhance technical expertise, identify and help address potential workplace hazards associated with traditional industrial robots and the emerging technology of human-robot collaboration installations and systems, and help identify needed research to reduce workplace hazards. On October 16 NIOSH launched the Center for Occupational Robotics Research to "provide scientific leadership to guide the development and use of occupational robots that enhance worker safety, health, and well being". So far, the research needs identified by NIOSH and its partners include: tracking and preventing injuries and fatalities, intervention and dissemination strategies to promote safe machine control and maintenance procedures, and on translating effective evidence-based interventions into workplace practice. == Hazards == Many hazards and injuries can result from the use of robots in the workplace. Some robots, notably those in a traditional industrial environment, are fast and powerful. This increases the potential for injury as one swing from a robotic arm, for example, could cause serious bodily harm. There are additional risks when a robot malfunctions or is in need of maintenance. A worker who is working on the robot may be injured because a malfunctioning robot is typically unpredictable. For example, a robotic arm that is part of a car assembly line may experience a jammed motor. A worker who is working to fix the jam may suddenly get hit by the arm the moment it becomes unjammed. Additionally, if a worker is standing in a zone that is overlapping with nearby robotic arms, he or she may get injured by other moving equipment. There are four types of accidents that can occur with robots: impact or collision accidents, crushing and trapping accidents, mechanical part accidents, and other accidents. Impact or collision accidents occur generally from malfunctions and unpredicted changes. Crushing and trapping accidents occur when a part of a worker's body becomes trapped or caught on robotic equipment. Mechanical part accidents can occur when a robot malfunctions and starts to "break down", where the ejection of parts or exposed wire can cause serious injury. Other accidents at just general accidents that occur from working with robots. There are seven sources of hazards that are associated with human interaction with robots and machines: human errors, control errors, unauthorized access, mechanical failures, environmental sources, power systems, and improper installation. Human errors could be anything from one line of incorrect code to a loose bolt on a robotic arm. Many hazards can stem from human-based error. Control errors are intrinsic and are usually not controllable nor predictable. Unauthorized access hazards occur when a person who is not familiar with the area enters the domain of a robot. Mechanical failures can happen at any time, and a faulty unit is usually unpredictable. Environmental sources are things such as electromagnetic or radio interference in the environment that can cause a robot to malfunction. Power systems are pneumatic, hydraulic, or electrical power sources; these power sources can malfunction and cause fires, leaks, or electrical shocks. Improper installation is fairly self-explanatory; a loose bolt or an exposed wire can lead to inherent hazards. === Emerging technologies === Emerging robotic technologies can reduce hazards to workers, but can also introduce new hazards. For example, robotic exoskeletons can be used in construction to reduce load to the spine, improve posture, and reduce fatigue; however, they can also increase chest pressure, limit mobility when moving out of the way of a falling object, and cause balance problems. Unmanned aerial vehicles are being used in the construction industry to do monitoring and inspections of buildings under construction. This reduces the need for humans to be in hazardous locations, but the risk of a UAV collision presents a hazard to workers. For collaborative robots, isolation is not possible. Possible hazard controls include collision avoidance systems, and making the robot less stiff to lessen the impact force. Robotic tech vest is a wearable device for humans, worn in Amazon warehouses. == Hazard controls == There are a few ways to prevent injuries by implementing hazard controls. There can be risk assessments at each of the various stages of a robot's development. Risk assessments can help gather information about a robot's status, how well it is being maintained, and if repairs are needed soon. By being aware of the status of a robot, injuries can be prevented and hazards reduced. Safeguarding devices can be implemented to reduce the risk of injuries. These can include engineering controls such as physical barriers, guard rails, presence-sensing safeguarding devices, etc. Awareness devices are usually used in conjunction with safeguarding devices. They are usually a system of rope or chain barriers with lights, signs, whistles, and horns. Their purpose it to be able to alert workers or personnel of certain dangers. Operator safeguards can also be in place. These usually utilize safeguarding devices to protect the operator and reduce risk of injury. Additionally, when an operator is within close proximity of a robot, the working speed of the robot can be reduced to ensure that the operator is in full control. This can be done by placing the robot in the manual or teach mode. It is also crucial to inform the programmer of the robot of what type of work the robot will be doing, how it will interact with other robots, and how it will work in relation to an operator. Proper maintenance of robotic equipment is also critical in order to reduce hazards. Maintaining a robot insures that it continues to function properly, thereby reducing the risks associated with a malfunction. One common safeguard used in industrial settings is the installation of robot safety fencing. These barriers, often made from durable materials such as mesh or polycarbonate, prevent accidental interactions between workers and robotic systems, reducing the risk of injury. Robot safety fencing is particularly important in environments where high-speed or powerful robots are used. == Regulations == Some existing regulations regarding robots and robotic systems include: ANSI/RIA R15.06 OSHA 29 CFR 1910.333 OSHA 29 CFR 1910.147 ISO 10218 ISO/TS 15066 ISO/DIS 13482
Read more →
Color clock

The color clock, or color timer, is a part of the video circuitry of computer graphics hardware that works with analog color television systems. The clock is timed to match the timing of the color standard it works with, typically NTSC or PAL, ensuring that the data being read from the computer memory to create the image on-screen is in sync with the display. Depending on the speed of the color clock, the product of the resolution and number of colors is defined. Slow color clocks of many early games consoles and home computers resulted in limited color palettes at the highest resolutions.
Read more →
Confidential computing

Confidential computing is a security and privacy-enhancing computational technique focused on protecting data in use. Confidential computing can be used in conjunction with storage and network encryption, which protect data at rest and data in transit respectively. It is designed to address software, protocol, cryptographic, and basic physical and supply-chain attacks, although some critics have demonstrated architectural and side-channel attacks effective against the technology. The technology protects data in use by performing computations in a hardware-based trusted execution environment (TEE). Confidential data is released to the TEE only once it is assessed to be trustworthy. Different types of confidential computing define the level of data isolation used, whether virtual machine, application, or function, and the technology can be deployed in on-premise data centers, edge locations, or the public cloud. It is often compared with other privacy-enhancing computational techniques such as fully homomorphic encryption, secure multi-party computation, and Trusted Computing. Confidential computing is promoted by the Confidential Computing Consortium (CCC) industry group, whose membership includes major providers of the technology. == Properties == Trusted execution environments (TEEs) "prevent unauthorized access or modification of applications and data while they are in use, thereby increasing the security level of organizations that manage sensitive and regulated data". Trusted execution environments can be instantiated on a computer's processing components such as a central processing unit (CPU) or a graphics processing unit (GPU). In their various implementations, TEEs can provide different levels of isolation including virtual machine, individual application, or compute functions. Typically, data in use in a computer's compute components and memory exists in a decrypted state and can be vulnerable to examination or tampering by unauthorized software or administrators. According to the CCC, confidential computing protects data in use through a minimum of three properties: Data confidentiality: "Unauthorized entities cannot view data while it is in use within the TEE". Data integrity: "Unauthorized entities cannot add, remove, or alter data while it is in use within the TEE". Code integrity: "Unauthorized entities cannot add, remove, or alter code executing in the TEE". In addition to trusted execution environments, remote cryptographic attestation is an essential part of confidential computing. The attestation process assesses the trustworthiness of a system and helps ensure that confidential data is released to a TEE only after it presents verifiable evidence that it is genuine and operating with an acceptable security posture. It allows the verifying party to assess the trustworthiness of a confidential computing environment through an "authentic, accurate, and timely report about the software and data state" of that environment. "Hardware-based attestation schemes rely on a trusted hardware component and associated firmware to execute attestation routines in a secure environment". Without attestation, a compromised system could deceive others into trusting it, claim it is running certain software in a TEE, and potentially compromise the confidentiality or integrity of the data being processed or the integrity of the trusted code. == Technical approaches == Technical approaches to confidential computing may vary in which software, infrastructure and administrator elements are allowed to access confidential data. The "trust boundary," which circumscribes a trusted computing base (TCB), defines which elements have the potential to access confidential data, whether they are acting benignly or maliciously. Confidential computing implementations enforce the defined trust boundary at a specific level of data isolation. The three main types of confidential computing are: Virtual machine isolation Application isolation, also known as process isolation Function isolation, also known as library isolation Virtual machine isolation removes the elements controlled by the computer infrastructure or cloud provider, but allows potential data access by elements inside a virtual machine running on the infrastructure. Application or process isolation permits data access only by authorized software applications or processes. Function or library isolation is designed to permit data access only by authorized subroutines or modules within a larger application, blocking access by any other system element, including unauthorized code in the larger application. == Threat model == As confidential computing is concerned with the protection of data in use, only certain threat models can be addressed by this technique. Other types of attacks are better addressed by other privacy-enhancing technologies. === In scope === The following threat vectors are generally considered in scope for confidential computing: Software attacks: including attacks on the host’s software and firmware. This may include the operating system, hypervisor, BIOS, other software and workloads. Protocol attacks: including "attacks on protocols associated with attestation as well as workload and data transport". This includes vulnerabilities in the "provisioning or placement of the workload" or data that could cause a compromise. Cryptographic attacks: including "vulnerabilities found in ciphers and algorithms due to a number of factors, including mathematical breakthroughs, availability of computing power and new computing approaches such as quantum computing". The CCC notes several caveats in this threat vector, including relative difficulty of upgrading cryptographic algorithms in hardware and recommendations that software and firmware be kept up-to-date. A multi-faceted, defense-in-depth strategy is recommended as a best practice. Basic physical attacks: including cold boot attacks, bus and cache snooping and plugging attack devices into an existing port, such as a PCI Express slot or USB port. Basic upstream supply-chain attacks: including attacks that would compromise TEEs through changes such as added debugging ports. The degree and mechanism of protection against these threats varies with specific confidential computing implementations. === Out of scope === Threats generally defined as out of scope for confidential computing include: Sophisticated physical attacks: including physical attacks that "require long-term and/or invasive access to hardware" such as chip scraping techniques and electron microscope probes. Upstream hardware supply-chain attacks: including attacks on the CPU manufacturing process, CPU supply chain in key injection/generation during manufacture. Attacks on components of a host system that are not directly providing the capabilities of the trusted execution environment are also generally out-of-scope. Availability attacks: confidential computing is designed to protect the confidentiality and integrity of protected data and code. It does not address availability attacks such as Denial of Service or Distributed Denial of Service attacks. == Use cases == Confidential computing can be deployed in the public cloud, on-premise data centers, or distributed "edge" locations, including network nodes, branch offices, industrial systems and others. === Data privacy and security === Confidential computing protects the confidentiality and integrity of data and code from the infrastructure provider, unauthorized or malicious software and system administrators, and other cloud tenants, which may be a concern for organizations seeking control over sensitive or regulated data. The additional security capabilities offered by confidential computing can help accelerate the transition of more sensitive workloads to the cloud or edge locations. === Multi-party analytics === Confidential computing can enable multiple parties to engage in joint analysis using confidential or regulated data inside a TEE while preserving privacy and regulatory compliance. In this case, all parties benefit from the shared analysis, but no party's sensitive data or confidential code is exposed to the other parties or system host. Examples include multiple healthcare organizations contributing data to medical research, or multiple banks collaborating to identify financial fraud or money laundering. Oxford University researchers proposed the alternative paradigm called "Confidential Remote Computing" (CRC), which supports confidential operations in Trusted Execution Environments across endpoint computers considering multiple stakeholders as mutually distrustful data, algorithm and hardware providers. === Confidential generative AI === Confidential computing technologies can be applied to various stages of a generative AI deployments to help increase data or model privacy, security, and regulatory compliance. TEEs and remote attestation can protect the integrity of data during AI model training, keep
Read more →
Tactical NAV

Tactical NAV, also known as TACNAV-X, is a location-based tracking app designed for use by military personnel. The app is primarily designed to assist in pinpointing enemy fire and mapping waypoints. Tactical NAV also helps users efficiently relay critical information to tactical operations centers for prompt decision-making regarding airstrikes or medical evacuations. The TACNAV-X platform is intended to enhance situational awareness, refine navigation capabilities, and assist in tactical decision-making across various operational environments. == Overview == Tactical NAV allows users to pinpoint enemy fire. == History == Tactical NAV was designed by U.S. Army Captain Jonathan J. Springer, a Field Artillery officer serving as a Battalion Fire Support Officer (FSO) in the 101st Airborne Division. Springer conceived the idea for the app during his third tour in Afghanistan in support of Operation Enduring Freedom. On June 25, 2010, after a rocket attack by the Taliban killed two soldiers in his battalion, he was inspired to create an app that would prevent similar losses in the future, enhance situational awareness, and assist soldiers serving on combat deployments. In 2010, Springer founded TacNav Systems (formerly AppDaddy Technologies) to develop mobile applications for use by military personnel. He tested the app during combat operations in eastern Afghanistan and verified TACNAV-X's accuracy using DAGRs, AFATDS, Falcon View, CPOF, ATAK, and other approved Department of Defense (DoD) systems. As of 2012, the app had been downloaded 8,000 times.
Read more →
Screenpal

ScreenPal (formerly known as Screencast-O-Matic) is cross-platform screen capture and screen recording software originally developed in 2006. == History == The company was founded by AJ Gregory in 2006 as Screencast-O-Matic. The software includes features for screen recording, screenshot capture, video editing, image editing, and a video and image hosting service. It is available for Windows and Mac operating systems, and has mobile apps for iOS and Android. The company launched a video editor in 2015. It began offering free video and image hosting in 2019, with premium hosting options for subscribers. In 2023, it was rebranded as ScreenPal.
Read more →
Esdat

ESdat is a data management, analysis and reporting software for environmental and groundwater data, developed by EarthScience Information Systems (EScIS). It is used to manage many types of environmental data including laboratory chemistry (analytical results, QA data, lab sample planning, and electronic Chain of Custody), field chemistry (water, gas, and soil), hydrogeological data (groundwater, borehole and well construction, lithological, geotechnical and stratigraphic, and LNAPL), meteorological data (rain, wind, and temperature), emission data (dust deposition, HiVol, air quality, and noise) and logger data. Data can be compared against environmental standards or site-specific trigger levels to generate exceedence tables, time series graphs, maps, statistics, and other outputs. ESdat integrates with Power BI and ArcGIS and data can also be exported in a range of other database formats, including USEPA Regions 2,4 & 5, and NYS DEC. ESdat is used by environmental consultants, government, mining and industry for validation, interrogation, and reporting of data derived from complex environmental programs, such as contaminated sites, groundwater investigations, and regulatory compliance for landfills or mining operations.
Read more →
Information schema

In relational databases, the information schema (information_schema) is an ANSI-standard set of read-only views that provide information about all of the tables, views, columns, and procedures in a database. It can be used as a source of the information that some databases make available through non-standard commands, such as: the SHOW command of MySQL the DESCRIBE command of Oracle's SQLPlus the \d command in psql (PostgreSQL's default command-line program). => SELECT count(table_name) FROM information_schema.tables; count ------- 99 (1 row) => SELECT column_name, data_type, column_default, is_nullable FROM information_schema.columns WHERE table_name='alpha'; column_name | data_type | column_default | is_nullable -------------+-----------+----------------+------------- foo | integer | | YES bar | character | | YES (2 rows) => SELECT FROM information_schema.information_schema_catalog_name; catalog_name -------------- johnd (1 row) == Implementation == As a notable exception among major database systems, Oracle does not as of 2015 implement the information schema. An open-source project exists to address this. RDBMSs that support information_schema include: Amazon Redshift Apache Hive Microsoft SQL Server MonetDB Snowflake MySQL PostgreSQL H2 Database HSQLDB InterSystems Caché MariaDB SingleStore (formerly MemSQL) Mimer SQL Snowflake Trino Presto CrateDB ClickHouse CockroachDB Kinetica DB TiDB RDBMSs that do not support information_schema include: Apache Derby Apache Ignite Firebird Microsoft Access IBM Informix Ingres IBM Db2 Oracle Database SAP HANA SQLite Sybase ASE Sybase SQL Anywhere Teradata Vertica
Read more →
Display list

A display list, also called a command list in Direct3D 12 and a command buffer in Vulkan, is a series of graphics commands or instructions that are run when the list is executed. Systems that make use of display list functionality are called retained mode systems, while systems that do not are as opposed to immediate mode systems. In OpenGL, display lists are useful to redraw the same geometry or apply a set of state changes multiple times. This benefit is also used with Direct3D 12's bundle command lists. In Direct3D 12 and Vulkan, display lists are regularly used for per-frame recording and execution. == Origins in vector displays == The vector monitors or calligraphic displays of the 1960s and 1970s used electron beam deflection to draw line segments, points, and sometimes curves directly on a CRT screen. Because the image would immediately fade, it needed to be redrawn many times a second (storage tube CRTs retained the image until blanked, but they were unsuitable for interactive graphics). To refresh the display, a dedicated CPU called a Display Processor or Display Processing Unit (DPU) was used, which had a memory buffer for a "display list", "display file", or "display program" containing line segment coordinates and other information. Advanced Display Processors also supported control flow instructions, which were useful for drawing repetitive graphics such as text, and some could perform coordinate transformations such as 3D projection. == Home computer display list functionality == One of the earliest systems with a true display list was the Atari 8-bit computers. The display list (actually called so in Atari terminology) is a series of instructions for ANTIC, the video co-processor used in these machines. This program, stored in the computer's memory and executed by ANTIC in real-time, can specify blank lines, any of six text modes and eight graphics modes, which sections of the screen can be horizontally or vertically fine-scrolled, and trigger Display List Interrupts (called raster interrupts or HBI on other systems). The Amstrad PCW family contains a Display List function called the 'Roller RAM'. This is a 512-byte RAM area consisting of 256 16-bit pointers in RAM, one for each line of the 720 × 256 pixel display. Each pointer identifies the location of 90 bytes of monochrome pixels that hold the line's 720 pixel states. The 90 bytes of 8 pixel states are spaced at 8-byte intervals, so there are 7 unused bytes between each byte of pixel data. This suits how the text-orientated PCW constructs a typical screen buffer in RAM, where the first character's 8 rows are stored in the first 8 bytes, the second character's rows in the next 8 bytes, and so on. The Roller RAM was implemented to speed up display scrolling as it would have been unacceptably slow for its 3.4 MHz Z80 to move up the 23 KB display buffer 'by hand' i.e. in software. The Roller RAM starting entry used at the beginning of a screen refresh is controlled by a Z80-writable I/O register. Therefore, the screen can be scrolled simply by changing this I/O register. Another system using a Display List-like feature in hardware is the Amiga, which, not coincidentally, was also designed by some of the same people who developed the custom hardware for the Atari 8-bit computers. Once directed to produce a display mode, it would continue to do so automatically for every following scan line. The computer also included a dedicated co-processor, called "Copper", which ran a simple program or 'Copper List' intended for modifying hardware registers in sync with the display. The Copper List instructions could direct the Copper to wait for the display to reach a specific position on the screen, and then change the contents of hardware registers. In effect, it was a processor dedicated to servicing raster interrupts. The Copper was used by Workbench to mix multiple display modes (multiple resolutions and color palettes on the monitor at the same time), and by numerous programs to create rainbow and gradient effects on the screen. The Amiga Copper was also capable of reconfiguring the sprite engine mid-frame, with only one scanline of delay. This allowed the Amiga to draw more than its 8 hardware sprites, so long as the additional sprites did not share scanlines (or the one scanline gap) with more than 7 other sprites. i.e., so long as at least one sprite had finished drawing, another sprite could be added below it on the screen. Additionally, the later 32-bit AGA chipset allowed the drawing of bigger sprites (more pixels per row) while retaining the same multiplexing. The Amiga also had dedicated block-shifter ("blitter") hardware, which could draw larger objects into a framebuffer. This was often used in place of, or in addition to, sprites. In more primitive systems, the results of a display list can be simulated, though at the cost of CPU-intensive writes to certain display modes, color control, or other visual effect registers in the video device, rather than a series of rendering commands executed by the device. Thus, one must create the displayed image using some other rendering process, either before or while the CPU-driven display generation executes. In many cases, the image is also modified or re-rendered between frames. The image is then displayed in various ways, depending on the exact way in which the CPU-driven display code is implemented. Examples of the results possible on these older machines requiring CPU-driven video include effects such as Commodore 64/128's FLI mode, or Rainbow Processing on the ZX Spectrum. == Usage in OpenGL == To delimit a display list, the glNewList and glEndList functions are used, and to execute the list, the glCallList function is used. Almost all rendering commands that occur between the function calls are stored in the display list. Commands that affect the client state are not stored in display lists. Display lists are named with an integer value, and creating a display list with the same name as one already created overrides the first. The glNewList function expects two arguments: an integer representing the name of the list, and an enumeration for the compilation mode. The two modes include GL_COMPILE_AND_EXECUTE, which compiles and immediately executes, and GL_COMPILE, which only compiles the list. Display lists enable the use of the retained mode rendering pattern, which is a system in which graphics commands are recorded (retained) to execute in succession at a later time. This is contrary to immediate mode, where graphics commands are immediately executed on client calls. == Usage in Direct3D 12 == Command lists are created using the ID3D12Device::CreateCommandList function. Command lists may be created in several types: direct, bundle, compute, copy, video decode, video process, and video encoding. Direct command lists specify that a command list the GPU can execute, and doesn't inherit any GPU state. Bundles, are best used for storing and executing small sets of commands any number of times. This is used differently than regular command lists, where commands stored in a command list are typically executed only once. Compute command lists are used for general computations, with a common use being calculating mipmaps. A copy command list is strictly for copying and the video decode and video process command lists are for video decoding and processing respectively. Upon creation, command lists are in the recording state. Command lists may be re-used by calling the ID3D12GraphicsCommandList::Reset function. After recording commands, the command list must be transitioned out of the recording state by calling ID3D12GraphicsCommandList::Close. The command list is then executed by calling ID3D12CommandQueue::ExecuteCommandLists.
Read more →
Hint (app)

Hint (hint.app) is an American software platform that provides astrological content, personality assessments, and relationship compatibility tools. The application was launched in 2018 and is based in Claymont, Delaware. The platform has been described in media coverage as part of a broader trend of astrology-based and self-reflection applications, particularly among younger users. As of 2026, the company reports that it has reached more than 25 million users worldwide. == History == Hint was founded in 2018 and is headquartered in Claymont, Delaware. The platform was developed to address a growing demand among Millennials and Gen Z for structured self-reflection tools that deviate from traditional religious or clinical psychological frameworks. The app has become a prominent figure in the "emotional technology" sector, reaching over 25 million global users by 2026. The platform is frequently cited by sociologists and media outlets as a primary driver of the Open-source intelligence trend, where individuals use digital tools to vet and analyze personal relationships in the dating economy. Media coverage has described the platform as part of a broader trend in which digital tools incorporate astrology and symbolic frameworks into wellness and relationship advice. == Reception == Coverage of Hint has appeared alongside reporting on changing attitudes toward dating and relationships, particularly among younger adults. Surveys reported by media outlets have described shifts in dating behavior, including reduced interest in casual relationships and increased reliance on digital tools for emotional reflection and compatibility assessment. Additional reporting has linked the use of astrology apps to broader trends in emotional fatigue and changing relationship expectations. Lifestyle and culture publications have described Hint, as an example of applications that integrate astrology into digital self-reflection and relationship analysis.
Read more →
ISO/IEC JTC 1/SC 24

ISO/IEC JTC 1/SC 24 Computer graphics, image processing and environmental data representation is a standardization subcommittee of the joint subcommittee ISO/IEC JTC 1 of the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC), which develops and facilitates standards within the field of computer graphics, image processing, and environmental data representation. The international secretariat of ISO/IEC JTC 1/SC 24 is the British Standards Institute (BSI) located in the United Kingdom. == History == ISO/IEC JTC 1/SC 24 was formed in 1987 from ISO/TC 97 as a result of Resolution 21 at the ISO/IEC JTC 1 plenary. The group's origins began in computer graphics, the standardization of which was originally under ISO/IEC JTC 1/SC 21/WG 2. However, when ISO/IEC JTC 1/SC 24 was created, the standardization activity of ISO/IEC JTC 1/SC 21/WG 2 was carried over to the new subcommittee. The initial five working groups of ISO/IEC JTC 1/SC 24 were titled, “Architecture,” “Application programming interfaces,” “Metafiles and interfaces,” “Language bindings,” and “Validation, testing and registration.” The work of ISO/IEC JTC 1/SC 24 began with the Graphical Kernel System (GKS), which was adopted from ISO/IEC JTC 1/SC 21/WG 2. However, since GKS only addressed 2D functionality, attention turned to the standardization of 3D functionality. This resulted in two standards being published: GKS-3D in 1988 and PHIGS in 1989, both of which addressed 3D functionality. Since 1991, ISO/IEC JTC 1/SC 24 has held plenaries in a number of countries, including the Netherlands, Germany, United States, France, Canada, Japan, Sweden, Korea, United Kingdom, Australia, and Czech Republic. == Scope == The scope of ISO/IEC JTC 1/SC 24 is the “Standardization of interfaces for information technology based applications relating to”: Computer graphics Image processing Environmental data representation Support for the Mixed and Augmented Reality (MAR) Interaction with, and visual representation of, information Included are the following related areas: Modeling and simulation and related reference models Virtual reality with accompanying augmented reality/augmented virtuality aspects and related reference models Application program interfaces Functional specifications Representation models Interchange formats, encodings and their specifications, including metafiles Device interfaces Testing methods Registration procedures Presentation and support for creation of multimedia, hypermedia, and mixed reality documents Excluded are the following areas: Character and image coding Coding of multimedia, hypermedia, and mixed reality document interchange formats JTC 1 work in user system interfaces and document presentation ISO/TC 207 work on ISO 14000 environment management, ISO/TC 211 work on geographic information and geomatics Software environments as described by ISO/IEC JTC 1/SC 22 == Structure == ISO/IEC JTC 1/SC 24 is made up of four active working groups, each of which carries out specific tasks in standards development within the field of computer graphics, image processing and environmental data representation, together with ITU-T Study Group 16. As a response to changing standardization needs, working groups of ISO/IEC JTC 1/SC 24 can be disbanded if their area of work is no longer applicable, or established if new working areas arise. The focus of each working group is described in the group's terms of reference. Active working groups of ISO/IEC JTC 1/SC 24 are: == Collaborations == ISO/IEC JTC 1/SC 24 works in close collaboration with a number of other organizations or subcommittees, both internal and external to ISO or IEC, in order to avoid conflicting or duplicative work. Organizations internal to ISO or IEC that collaborate with or are in liaison to ISO/IEC JTC 1/SC 24 include: ISO/IEC JTC 1/WG 7, Sensor Networks ISO/IEC JTC 1/SC 29, Coding of audio, picture, multimedia and hypermedia information ISO/IEC JTC 1/SC 32, Data management and interchange ISO/TAG 14, Imagery and technology ISO/TC 130, Graphic Technology ISO/TC 184/SC 4, Industrial data ISO/TC 211, Geographic information/Geomatics ISO/TC 215, Health informatics IEC TC 100, Audio, video and multimedia system and equipment Some organizations external to ISO or IEC that collaborate with or are in liaison to ISO/IEC JTC 1/SC 24 include: Defence Geospatial Information Working Group (DGIWG) Digital Imaging and Communications in Medicine (DICOM) International Hydrographic Organization (IHO) The Khronos Group NATO - Joint Intelligence Surveillance and Reconnaissance Capability Group (JISRCG) OMG Robotics DTF Open CGM Open Geospatial Consortium (OGC) SEDRIS Organization Simulation Interoperability Standards Organization (SISO) US National Imagery Transmission Format Standard (NITFS) Technical Board (US NTB) Web3D Consortium World Intellectual Property Organization (WIPO) World Wide Web Consortium (W3C) == Member countries == Countries pay a fee to ISO to be members of subcommittees. The 11 "P" (participating) members of ISO/IEC JTC 1/SC 24 are: Australia, China, Egypt, France, India, Japan, Republic of Korea, Portugal, Russian Federation, United Kingdom, and United States. The 22 "O" (observer) members of ISO/IEC JTC 1/SC 24 are: Argentina, Austria, Belgium, Bosnia and Herzegovina, Bulgaria, Canada, Cuba, Czech Republic, Finland, Ghana, Hungary, Iceland, Indonesia, Islamic Republic of Iran, Italy, Kazakhstan, Malaysia, Poland, Romania, Serbia, Slovakia, Switzerland, and Thailand. == Published standards == ISO/IEC JTC 1/SC 24 currently has 80 published standards under their direct responsibility within the field of computer graphics, image processing, and environmental data representation, including:
Read more →
Cybernetic Serendipity

Cybernetic Serendipity was an exhibition of cybernetic art curated by Jasia Reichardt, shown at the Institute of Contemporary Arts, London, England, from 2 August to 20 October 1968, and then toured across the United States. Two stops in the United States were the Corcoran Annex (Corcoran Gallery of Art), Washington, D.C., from 16 July to 31 August 1969, and the newly opened Exploratorium in San Francisco, from 1 November to 18 December 1969. == Content == One part of the exhibition was concerned with algorithms and devices for generating music. Some exhibits were pamphlets describing the algorithms, whilst others showed musical notation produced by computers. Devices made musical effects and played tapes of sounds made by computers. Peter Zinovieff lent part of his studio equipment - visitors could sing or whistle a tune into a microphone and his equipment would improvise a piece of music based on the tune. Another part described computer projects such as Gustav Metzger's self-destructive Five Screens With Computer, a design for a new hospital, a computer programmed structure, and dance choreography. The machines and installations were a very noticeable part of the exhibition. Gordon Pask produced a collection of large mobiles (Colloquy of Mobiles (1968)) with interacting parts that let the viewers join in the conversation. Many machines formed kinetic environments or displayed moving images. Bruce Lacey contributed his radio-controlled robots and a light-sensitive owl. Nam June Paik was represented by Robot K-456 and televisions with distorted images. Jean Tinguely provided two of his painting machines. Edward Ihnatowicz's biomorphic hydraulic ear (Sound Activated Mobile (SAM, 1968)) turned toward sounds and John Billingsley's Albert 1967 turned to face light. Wen-Ying Tsai presented his interactive cybernetic sculptures of vibrating stainless-steel rods, stroboscopic light, and audio feedback control. Several artists exhibited machines that drew patterns that the visitor could take away, or involved visitors in games. Cartoonist Rowland Emett designed the mechanical computer Forget-me-not, which was commissioned by Honeywell. Another section explored the computer's ability to produce text - both essays and poetry. Different programs produced Haiku, children's stories, and essays. One of the first computer-generated poems, by Alison Knowles and James Tenney, was included in the exhibition and catalogue. Computer-generated movies were represented by John Whitney's Permutations and a Bell Labs movie on their technology for producing movies. Some samples included images of tesseracts rotating in four dimensions, a satellite orbiting the Earth, and an animated data structure. Computer graphics were also represented, including pictures produced on cathode ray oscilloscopes and digital plotters. There was a variety of posters and graphics demonstrating the power of computers to do complex (and apparently random) calculations. Other graphics showed a simulated Mondrian and the iconic decreasing squares spiral that appeared on the exhibition's poster and book. The Boeing Company exhibited their use of wireframe graphics. The innovative computer-generated sculpture, Quad 1, was displayed at the Cybernetic Serendipity exhibit. Created by the American abstract expressionist sculptor, Robert Mallary, in 1968, Quad 1 is widely believed to be the world's first Computer Aided Design sculpture. Keith Albarn & Partners contributed to the design of the exhibition. Reflecting the prominence of music in the show, a ten-track album Cybernetic Serendipity Music was released by the ICA to accompany the show. Artists featured included Iannis Xenakis, John Cage, and Peter Zinovieff, a detail of whose graphic score for 'Four Sacred April Rounds’ (1968) was used as the cover artwork. == Attendance == Time magazine noted that there had been 40,000 visitors to the London exhibition. Other reports suggested visitor numbers were as high as 44,000 to 60,000. However, the ICA did not accurately count visitors. == After-effects == The exhibition provided the energy for the formation of British Computer Arts Society which continued to explore the interaction between science, technology and art, and put on exhibitions (for example Event One at the Royal College of Art). Several pieces were purchased by the Exploratorium in 1971, some of which are on display to this day. In 2014 the ICA held a retrospective exhibition Cybernetic Serendipity: A Documentation which included documents, installation photographs, press reviews and publications and a series of discussions in one of which Peter Zinovieff took part. To coincide with the exhibition, Cybernetic Serendipity Music was re-released as a limited-edition vinyl LP by The Vinyl Factory. The Victoria and Albert Museum marked the 50th anniversary with an exhibition in 2018 entitled "Chance and Control: Art in the Age of Computers". The V&A exhibition included many works by artists who featured in the original ICA show, plus related ephemera. "Chance and Control" subsequently toured to Chester Visual Arts and Firstsite, Colchester. In 2020, The Centre Pompidou exhibited the replica of Gordon Pask's 1968 Colloquy of Mobiles, reproduced by Paul Pangaro and TJ McLeish in 2018. In 2022 the Australian National University's School of Cybernetics launched the school by presenting an exhibition Australian Cybernetic: a point through time. The exhibition included works from Cybernetic Serendipity (1968), Australia ‘75: Festival of Creative Arts and Science (1975), and contemporary pieces curated by the School of Cybernetics. In describing Reichardt's Cybernetic Serendipity exhibition the school stated that it "represented points of expanding the cybernetic imagination" and was a "ground-breaking" "glimpse of a future in which computers were entangled with people and cultures, and through this she fashioned a blueprint for the future of computing that has since inspired generations".
Read more →
Centurion Guard

Centurion Guard is a PC hardware and software-based security product, developed by Centurion Technologies. It was first released in 1996. There were several different releases and versions of this product, and many were distributed in computers donated to libraries by the Bill & Melinda Gates Foundation. == Operating system compatibility == Microsoft Windows 7 Microsoft Windows Vista Microsoft Windows XP
Read more →
Document classification

Document classification or document categorization is a problem in library science, information science and computer science. The task is to assign a document to one or more classes or categories. This may be done "manually" (or "intellectually") or algorithmically. The intellectual classification of documents has mostly been the province of library science, while the algorithmic classification of documents is mainly in information science and computer science. The problems are overlapping, however, and there is therefore interdisciplinary research on document classification. The documents to be classified may be texts, images, music, etc. Each kind of document possesses its special classification problems. When not otherwise specified, text classification is implied. Documents may be classified according to their subjects or according to other attributes (such as document type, author, printing year etc.). In the rest of this article only subject classification is considered. There are two main philosophies of subject classification of documents: the content-based approach and the request-based approach. == "Content-based" versus "request-based" classification == Content-based classification is classification in which the weight given to particular subjects in a document determines the class to which the document is assigned. It is, for example, a common rule for classification in libraries, that at least 20% of the content of a book should be about the class to which the book is assigned. In automatic classification it could be the number of times given words appears in a document. Request-oriented classification (or -indexing) is classification in which the anticipated request from users is influencing how documents are being classified. The classifier asks themself: “Under which descriptors should this entity be found?” and “think of all the possible queries and decide for which ones the entity at hand is relevant” (Soergel, 1985, p. 230). Request-oriented classification may be classification that is targeted towards a particular audience or user group. For example, a library or a database for feminist studies may classify/index documents differently when compared to a historical library. It is probably better, however, to understand request-oriented classification as policy-based classification: The classification is done according to some ideals and reflects the purpose of the library or database doing the classification. In this way it is not necessarily a kind of classification or indexing based on user studies. Only if empirical data about use or users are applied should request-oriented classification be regarded as a user-based approach. == Classification versus indexing == Sometimes a distinction is made between assigning documents to classes ("classification") versus assigning subjects to documents ("subject indexing") but as Frederick Wilfrid Lancaster has argued, this distinction is not fruitful. "These terminological distinctions,” he writes, “are quite meaningless and only serve to cause confusion” (Lancaster, 2003, p. 21). The view that this distinction is purely superficial is also supported by the fact that a classification system may be transformed into a thesaurus and vice versa (cf., Aitchison, 1986, 2004; Broughton, 2008; Riesthuis & Bliedung, 1991). Therefore, assigning a subject term to a document in an index is equivalent to assigning that document to the class of documents indexed by that term (all documents indexed or classified as X belong to the same class of documents). == Automatic document classification (ADC) == Automatic document classification tasks can be divided into three sorts: supervised document classification where some external mechanism (such as human feedback) provides information on the correct classification for documents, unsupervised document classification (also known as document clustering), where the classification must be done entirely without reference to external information, and semi-supervised document classification, where parts of the documents are labeled by the external mechanism. There are several software products under various license models available. === Techniques === Automatic document classification techniques include: Artificial neural network Concept Mining Decision trees such as ID3 or C4.5 Expectation maximization (EM) Instantaneously trained neural networks Latent semantic indexing Multiple-instance learning Naive Bayes classifier Natural language processing approaches Rough set-based classifier Soft set-based classifier Support vector machines (SVM) K-nearest neighbour algorithms tf–idf == Applications == Classification techniques have been applied to spam filtering, a process which tries to discern E-mail spam messages from legitimate emails email routing, sending an email sent to a general address to a specific address or mailbox depending on topic language identification, automatically determining the language of a text genre classification, automatically determining the genre of a text readability assessment, automatically determining the degree of readability of a text, either to find suitable materials for different age groups or reader types or as part of a larger text simplification system sentiment analysis, determining the attitude of a speaker or a writer with respect to some topic or the overall contextual polarity of a document. health-related classification using social media in public health surveillance article triage, selecting articles that are relevant for manual literature curation, for example as is being done as the first step to generate manually curated annotation databases in biology
Read more →
Fake nude photography

Fake nude photography is the creation of nude photographs designed to appear as genuine nudes of an individual. The motivations for the creation of these modified photographs include curiosity, sexual gratification, the stigmatization or embarrassment of the subject, and commercial gain, such as through the sale of the photographs via pornographic websites. Fakes can be created using image editing software or through machine learning. Fake images created using the latter method are called deepfakes. == History == Magazines such as Celebrity Skin published non-fake paparazzi shots and illicitly obtained nude photos, showing there was a market for such images. Subsequently, some websites hosted fake nude or pornographic photos of celebrities, which are sometimes referred to as celebrity fakes. In the 1990s and 2000s, fake nude images of celebrities proliferated on Usenet and on websites, leading to campaigns to take legal action against the creators of the images and websites dedicated to determining the veracity of nude photos. "Deepfakes", which use artificial neural networks to superimpose one person's face into an image or video of someone else, were popularized in the late 2010s, leading to concerns about the technology's use in fake news and revenge porn. Fake nude photography is sometimes confused with Deepfake pornography, but the two are distinct. Fake nude photography typically starts with human-made non-sexual images, and merely makes it appear that the people in them are nude (but not having sex). Deepfake pornography typically starts with human-made sexual (pornographic) images or videos, and alters the actors' facial features to make the participants in the sexual act look like someone else. === DeepNude === In June 2019, a downloadable Windows and Linux application called DeepNude was released which used a Generative Adversarial Network to remove clothing from images of women. The images it produced were typically not pornographic, merely nude. Because there were more images of nude women than men available to its creator, the images it produced were all female, even when the original was male. The app had both a paid and unpaid version. A few days later, on June 27, the creators removed the application and refunded consumers, although various copies of the app, both free and for charge, continue to exist. On GitHub, the open-source version of this program called "open-deepnude" was deleted. The open-source version had the advantage of allowing it to be trained on a larger dataset of nude images to increase the resulting nude image's accuracy level. A successor free software application, Dreamtime, was later released, and some copies of it remain available, though some have been suppressed. === Deepfake Telegram Bot === In July 2019 a deepfake bot service was launched on messaging app Telegram that used AI technology to create nude images of women. The service was free and enabled users to submit photos and receive manipulated nude images within minutes. The service was connected to seven Telegram channels, including the main channel that hosts the bot, technical support, and image sharing channels. While the total number of users was unknown, the main channel had over 45,000 members. As of July 2020, it is estimated that approximately 24,000 manipulated images had been shared across the image sharing channels. === Nudify websites === By late 2024, most ways to produce nude images from photographs of clothed people were accessible at websites rather than in apps, and required payment. == Purposes == The reasons for the creation of nude photos may range from a need to discredit the target publicly, personal hatred for the target, or the promise of pecuniary gains for such work on the part of the creator of such photos. Fake nude photos often target prominent figures such as businesspeople or politicians. == Notable cases == In 2010, 97 people were arrested in Korea after spreading fake nude pictures of the group Girls' Generation on the internet. In 2011, a 53-year-old Incheon man was arrested after spreading more fake pictures of the same group. In 2012, South Korean police identified 157 Korean artists of whom fake nudes were circulating. In 2012, when Liu Yifei's fake nude photography released on the network, Liu Yifei Red Star Land Company declared a legal search to find out who created and released the photos. In the same year, Chinese actor Huang Xiaoming released nude photos that sparked public controversy, but they were ultimately proven to be real pictures. In 2014, supermodel Kate Upton threatened to sue a website for posting her fake nude photos. Previously, in 2011, this page was threatened by Taylor Swift. In November 2014, singer Rain was angry because of a fake nude photo that spread throughout the internet. Information reveals that: "Rain's nude photo was released from Kim Tae-hee's lost phone." Rain's label, Cube Entertainment, stated that the person in the nude photo is not Rain and the company has since stated that it will take strict legal action against those who post photos together with false comments. In July 2018, Seoul police launched an investigation after a fake nude photo of President Moon Jae-in was posted on the website of the Korean radical feminist group WOMAD. In early 2019, Alexandria Ocasio-Cortez, a Democratic politician, was berated by other political parties over a fake nude photo of her in the bathroom. The picture created a huge wave of media controversy in the United States. == Methods == Fake nude images can be created using image editing software or neural network applications. There are two basic methods: Combine and superimpose existing images onto source images, adding the face of the subject onto a nude model. Remove clothes from the source image to make it look like a nude photo. == Impact == Images of this type may have a negative psychological impact on the victims and may be used for extortion purposes.
Read more →
Randonautica

Randonautica (a portmanteau of "random" + "nautica") is an app launched on February 22, 2020 founded by Auburn Salcedo and Joshua Lengfelder. It randomly generates coordinates that encourages the user to explore their local area and report what is found. According to its creators, the app is "an attractor of strange things," letting one choose specific coordinates based on a specific theme. It gained controversy after a report of two teenagers coincidentally finding a corpse while using the application. == Overview == The app, which creators claim to be inspired by chaos theory and Guy Debord's Theory of the Dérive, offers its users three types of coordinates to choose from: an attractor, a void, or an anomaly. The app has a cult following on YouTube and TikTok and there is a subreddit made by the creators for users of the app. == History == 29-year-old circus performer Joshua Lengfelder discovered a bot called Fatum Project in a fringe science chat group on Telegram in January 2019. According to The New York Times, "He absorbed the project’s theories about how random exploration could break people out of their predetermined realities, and how people could influence random outcomes with their minds." Lengfelder then created a Telegram bot using Fatum Project's code, generating coordinates. He then created the subreddit r/randonauts in March. In October, developer Simon Nishi McCorkindale made the bot's webpage. With the help of Auburn Salcedo, chief executive of a TV agency, both created Randonauts LLC. Salcedo became the chief operating officer while Lengfelder was the CEO. The app, called Randonautica, was launched on February 22, 2020. Later the same year the app and back-end got completely overhauled by a new team of developers and got a more visual and friendlier design and logo. In April 2022 Lengfelder exited Randonauts LLC and Auburn Salcedo became CEO. == Reception == The app has as many as 10.8 million users as of July 2020, gaining popularity amid the COVID-19 pandemic in the United States as restrictions have been lightened. Emma Chamberlain made a YouTube video about the app that helped increase its following. i-D reported that the hashtag #randonautica has gained 176.5 million views on TikTok, although it has not marketed itself yet. === Controversy === With the app's popularity, users started reporting coincidences which many find unsettling. The majority of reports were from TikTok and Reddit, as well as Telegram. The most notable controversy involved a group of people heading to a beach in Duwamish Head, Puget Sound, West Seattle per the app, where they found a bag with two dead bodies, a 27-year-old male and a 36-year-old female, as reported by the Seattle Police homicide detectives. In August 2020, police arrested and charged their landlord, Michael Lee Dudley, in connection with the murders. In March 2021, Dudley was denied bail while other people were under suspicion of aiding Dudley in the dismemberment and disposal of the bodies, but no one else had been charged. This has caused speculation that the app has an intended, puzzle-like theme. However, Lengfelder stated that it is "a shocking coincidence." Salcedo called the videos fake, and that "It’s so hard to manage, because people are really taking creative liberties after seeing how much traction the app is getting in that fear factor." In 2022, Michael Dudley was convicted of second degree murder for killing both victims, who were identified as Jessica Lewis and Austin Wenner. He was sentenced to 46 years in prison the following year. In their questions page, Randonautica's creators have said that if the app generates coordinates inside a private property, it is a violation of their terms and conditions to trespass. In addition, Randonautica has also received allegations that the app is used for human trafficking, which its creators have denied, saying that data collected by the app are anonymous. It also ensured that the app is not designed to violate religious customs, saying that "the app is simply a tool. Just as a knife can be used either to prepare dinner or to cut somebody."
Read more →