AI Avatar Of Deceased

AI Avatar Of Deceased — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Ed (chatbot)

Ed was a chatbot co-developed by the Los Angeles Unified School District and AllHere Education. Described as a learning acceleration platform, it was the first personal assistant for students in the United States. Part of the district's Individual Acceleration Plan, it was able to interact with students both verbally and visually, offering support in 100 languages. The chatbot was launched on March 20, 2024, as part of the district's plan for academic recovery from the COVID-19 pandemic and to improve overall academic performance. Utilizing artificial intelligence, Ed organizes data and reports on grades, test scores, and attendance, creating individualized plans for each student. After the company behind it, AllHere, collapsed, the district shuttered operations of the chatbot on June 14, 2024. The firm is under investigation by the US Federal Bureau of Investigation. == History == On February 14, 2022, Alberto M. Carvalho became the Superintendent of the Los Angeles Unified School District, pledging to give the district a full academic recovery from the COVID-19 pandemic. In December 2022, he announced the Individual Acceleration Plan for the district, which aimed to provide each student with a unique progress report and help them determine if they were on track to graduate. The district faced criticism from disability advocates for its management of Individualized Education Programs, and in April 2022, the United States Department of Education announced that the district had failed to provide appropriate educational services to students with disabilities during the pandemic. The district had been grappling with significant absenteeism issues since the pandemic, which led to declining academic performance and disengagement among students. On February 17, 2023, the district issued a request for proposals to develop a fully integrated portal system. Later that year, they signed a $6 million, five-year contract with AllHere Education, a Boston-based company founded in 2016. The introduction of Ed follows the public launch of ChatGPT, which has been utilized by both teachers and students in educational settings. On August 4, 2023, during an annual address at the Walt Disney Concert Hall, Carvalho and the Los Angeles Unified School District announced the launch of Ed. The district invested $4 million into the chatbot, with Carvalho noting that this cost would be halved thanks to donor and grant funding. The chatbot was launched on March 20, 2024. Following its launch, a press conference was held to address security and technology concerns. Carvalho stated that the district had collaborated with security companies and incorporated filters to screen for threatening language. Months after its launch, AllHere Education furloughed most of its staff on June 14, citing their “current financial position” on its website as the reason. After learning about the furlough, the district terminated its dealings with AllHere Education. However, it stated its intention to bring the chatbot back in the future once officials determine the best course of action. Carvalho announced that he would appoint an independent task force to review what went wrong with AllHere Education and the chatbot. On February 25, 2026, the FBI served a search warrant on Carvalho’s home and office in connection with AllHere. The FBI also raided the LAUSD's headquarters. == Service == The chatbot was described as a personal assistant and a "one-stop shop for parents and students" who want to see information about a student's attendance and grades, as well as other resources from the district. Additionally, the application can function as an alarm clock, provide daily lunch menus from the school cafeteria, and offer updates on the location of school buses. The chatbot also helps students and parents who do not speak English as their first language by translating displayed information into approximately 100 different languages. The application can also help with submitting applications and give updates on progress and upcoming assignments. The district stated that the primary goal of Ed was to actively motivate students to complete homework and other tasks. == Reception == The chatbot received a mostly positive reception among parents and observers upon its launch. Some parents and teachers expressed caution about the technology, voicing concerns that the district's push for its implementation lacked public accountability. Rob Nelson from the University of Pennsylvania described the district's strategy as risky, saying that the release felt "like the beginning of a Clippy-level disaster". After the chatbot's shutdown, The 74 criticized it for misusing student data. Chris Whiteley, a former software engineer at AllHere Education, alleged that the data collected by the chatbot likely violated the district's data privacy rules.
Read more →
QF-Test

QF-Test from Quality First Software is a cross-platform software tool for automated testing of programs via the graphical user interface (GUI) test automation). The program is specialized on (Java/Swing, Standard Widget Toolkit (SWT), Eclipse plug-ins and rich client platform (RCP) applications, ULC and JavaFX) cross-web browser test automation of static and dynamic web applications (HTML and web frameworks like Angular, Ext JS, Fluent UI React, Google Web Toolkit (GWT), jQuery UI, jQueryEasyUI Remote Application Platform (RAP), Qooxdoo, RichFaces, Vaadin, React, Smart GWT, Vue.js, ICEfaces and ZK). Version 4.1 added support for macOS and the Apple Safari and Microsoft Edge browsers via the Selenium WebDriver. Representational State Transfer (RESTful) web service testing. From version 5.0, Windows applications can also be tested (classic Win32 applications, .NET framework applications (often developed in C#) based on Windows Presentation Foundation (WPF) or Windows Forms, Windows apps and Universal Windows Platform (UWP) applications using Extensible Application Markup Language (XAML) controls) and modern C++ applications (such as Qt applications). Version 5.3 added support for the Chrome DevTools protocol, which allows browsers to be controlled using CDP drivers. Since then, mobile testing for iOS and Android, accessibility testing of web applications and SmartID, a new approach for more flexible and robust component recognition, have been introduced. Powerful enhancements such as WebAPI testing and AI-assisted validation complement the test automation tool. == Overview == QF-Test (the successor of qftestJUI, available since 2001) enables regression and load testing and runs on Windows, Unix and macOS. It is mainly used commercially by testers, developers or business analysts (modelling, low code approaches) with or without programming knowledge as part of software Quality Assurance. Since December 2008, a webtest add-on is available which allows test automation of browser-based GUIs (such as Internet Explorer, Mozilla Firefox, Google Chrome, Apple Safari, and Microsoft Edge) along with extant Java GUI test functions, which was extended to include JavaFX in July 2014. From 2018, QF-Test version 4.2 can test PDF documents, from 2020 native desktop applications (QF-Test version 5) and in 2022, mobile application testing will be added. The basis for efficient use in test automation is stable component recognition (IDs, logical screen elements, labels, CustomWebResolver, SmartID, ...) with low maintenance effort. == Features == General – QF-Test's capture/replay function enables recording of tests for beginners, while modular programming (modularizing) allows creating large test suites in a concise arrangement. For the advanced user who requires even more control over his application, the tool offers access to internal program structures through the standard scripting languages Jython, the Java implementation of the popular Python language, JavaScript, and Groovy. The tool also offers a batch processing mode, allowing to run tests unattended and then generate XML, HTML and JUnit reports. Thus the tool can be integrated into existing build/test frameworks like Jenkins, Ant or Maven. Another mode is the so-called Daemon mode for distributed test execution. A specific integration with many test management tools exists. There is a test debugger (enabling arbitrary stepping and editing variables at runtime) and a fully automated dependency management that takes care of pre- and postconditions and helps isolating test cases. Data-driven testing with no need for scripting is possible. Web testing: cross-browser on Internet Explorer, Chrome, Firefox, Edge (including Chromium-based), Opera and Safari for static and dynamic websites (HTML5, Ajax, DOM). A headless browser can also be used for testing. QF-Test fully supports frameworks like Angular, React and Vue.js, but also many specific UI toolkits like Smart (GWT), GXT/ExtGWT, ExtJS, ICEfaces, jQuery UI, Kendo UI, PrimeFaces, Qooxdoo, RAP, RichFaces, Vaadin and ZK. Easy integration with Selenium makes it easy to balance development and functional testing. Electron applications can also be tested. Other (e.g., SAP UI5, Siebel Open UI, Salesforce) and future web toolkits can be integrated with little effort. Short-term and individual customisations (CustomWebResolver) are possible via an optimised interface JavaFX, Java Swing, SWT, Eclipse plug-ins and RCP applications and ULC. Support for testing when migrating from JavaSwing or JavaFX to web applications (e.g. via Webswing). Hybrid applications based on multiple technologies are also supported, e.g. applications that integrate HTML content into Java applications using JxBrowser. Windows-based applications (Win32, .NET, Windows Forms, WPF, Windows apps, Qt). Android applications can be tested on real devices and with the Android Studio emulator. iOS applications can also be tested on real devices and with the Xcode Simulator. Testing of PDF documents (document comparisons, checking content, texts, images/graphic objects, layouts, "invisible" or partially hidden objects). QF-Test 9 introduces web accessibility testing to automatically check compliance with WCAG and other standards. QF-Test 10 introduces powerful enhancements for WebAPI testing and AI-assisted validation.
Read more →
Focus recovery based on the linear canonical transform

For digital image processing, the Focus recovery from a defocused image is an ill-posed problem since it loses the component of high frequency. Most of the methods for focus recovery are based on depth estimation theory. The Linear canonical transform (LCT) gives a scalable kernel to fit many well-known optical effects. Using LCTs to approximate an optical system for imaging and inverting this system, theoretically permits recovery of a defocused image. == Depth of field and perceptual focus == In photography, depth of field (DOF) means an effective focal length. It is usually used for stressing an object and deemphasizing the background (and/or the foreground). The important measure related to DOF is the lens aperture. Decreasing the diameter of aperture increases focus and lowers resolution and vice versa. == The Huygens–Fresnel principle and DOF == The Huygens–Fresnel principle describes diffraction of wave propagation between two fields. It belongs to Fourier optics rather than geometric optics. The disturbance of diffraction depends on two circumstance parameters, the size of aperture and the interfiled distance. Consider a source field and a destination field, field 1 and field 0, respectively. P1(x1,y1) is the position in the source field, P0(x0,y0) is the position in the destination field. The Huygens–Fresnel principle gives the diffraction formula for two fields U(x0,y0), U(x1,y1) as following: U ( x 0 , y 0 ) = 1 j λ ∫ ∫ U ( x 1 , y 1 ) e j k r 01 r 01 cos ⁡ θ d x 1 d y 1 {\displaystyle \mathbf {U} (x_{0},y_{0})={\frac {1}{j\lambda }}\int \!\int \mathbf {U} (x_{1},y_{1}){\frac {e^{jkr_{01}}}{r_{01}}}\cos \theta dx_{1}dy_{1}} where θ denotes the angle between r 01 {\displaystyle r_{01}} and z {\displaystyle z} . Replace cos θ by r 01 z {\displaystyle {\frac {r_{01}}{z}}} and r 01 {\displaystyle r_{01}} by [ ( x 0 − x 1 ) 2 + ( y 0 − y 1 ) 2 + z 2 ] 1 / 2 {\displaystyle [(x_{0}-x_{1})^{2}+(y_{0}-y_{1})^{2}+z^{2}]^{1/2}} we get U ( x 0 , y 0 ) = 1 j λ z ∫ ∫ U ( x 1 , y 1 ) exp ⁡ ( j k z [ 1 + ( x 0 − x 1 z ) 2 + ( y 0 − y 1 z ) 2 ] 1 / 2 ) 1 + ( x 0 − x 1 z ) 2 + ( y 0 − y 1 z ) 2 d x 1 d y 1 {\displaystyle \mathbf {U} (x_{0},y_{0})={\frac {1}{j\lambda z}}\int \!\int \mathbf {U} (x_{1},y_{1}){\frac {\exp(jkz[1+({\frac {x_{0}-x_{1}}{z}})^{2}+({\frac {y_{0}-y_{1}}{z}})^{2}]^{1/2})}{1+({\frac {x_{0}-x_{1}}{z}})^{2}+({\frac {y_{0}-y_{1}}{z}})^{2}}}dx_{1}dy_{1}} The further distance z or the smaller aperture (x1,y1) causes a greater diffraction. A larger DOF can lead to a more effective focused wave distribution. This seems to be a conflict. Here are the notations: Diffraction In a real imaging environment, the depths of objects comparing to the aperture are usually not enough to lead to serious diffraction. However, a long enough depth of the object can truly blurs the image. Effective Focus Small aperture, small blurring radius, few wave information. Loses details in comparing to a large aperture. In conclusion, diffraction explains a micro behavior whereas DOF shows a macro behavior. Both of them are related to aperture size. == Linear canonical transform == As the meaning of "canonical", the linear canonical transform (LCT) is a scalable transform that connects to many important kernels such as the Fresnel transform, Fraunhofer transform and the fractional Fourier transform. It can be easily controlled by its four parameters, a, b, c, d (3 degrees of freedom). The definition: L M ( f ( u ) ) = ∫ L M ( u , u ′ ) f ( u ′ ) d u ′ {\displaystyle L_{M}(f(u))=\int L_{M}(u,u')f(u')du'} where L M ( u , u ′ ) = { 1 b e − j π / 4 e [ j π ( d b u 2 ) − 2 1 b u u ′ + a b u ′ 2 ] , if b ≠ 0 d e j 2 c d u 2 δ ( u ′ − d u ) , if b = 0 {\displaystyle L_{M}(u,u')={\begin{cases}{\sqrt {\frac {1}{b}}}e^{-j\pi /4}e^{[j\pi ({\frac {d}{b}}u^{2})-2{\frac {1}{b}}uu'+{\frac {a}{b}}u'^{2}]},&{\mbox{if }}b\neq 0\\{\sqrt {d}}e^{{\frac {j}{2}}cdu^{2}}\delta (u'-du),&{\mbox{if }}b=0\end{cases}}} Consider a general imaging system with object distance z0, focal length of the thin lens f and an imaging distance z1. The effect of the propagation in freespace acts as nearly a chirp convolution, that is, the formula of diffraction. Besides, the effect of the propagation in thin lens acts as a chirp multiplication. The parameters are all simplified as paraxial approximations while meeting the freespace propagation. It does not consider aperture size. From the properties of the LCT, it is possible to obtain those 4 parameters for this optical system as: [ 1 − z 1 f λ z 0 − λ z 0 z 1 f + λ z 1 − 1 λ f 1 − z 0 f ] {\displaystyle {\begin{bmatrix}1-{\frac {z_{1}}{f}}\quad &\lambda z_{0}-{\frac {\lambda z_{0}z_{1}}{f}}+\lambda z_{1}\\-{\frac {1}{\lambda f}}\quad &1-{\frac {z_{0}}{f}}\end{bmatrix}}} Once the values of z1, z0 and f are known, the LCT can simulate any optical system.
Read more →
Visual Expert

Visual Expert is a static code analysis tool, extracting design and technical information from software source code by reverse-engineering, used by programmers for software maintenance, modernization or optimization. It is designed to parse several programming languages at the same time (PL/SQL, Transact-SQL, PowerBuilder...) and analyze cross-language dependencies, in addition to each language's source code. Visual Expert checks source code against hundreds of code inspection rules for vulnerability assessment, bug fix, and maintenance issues. == Features == Cross-references exploration: Impact Analysis, E/R diagrams, call graphs, CRUD matrix, dependency graphs. Software documentation: a documentation generator produces technical documentation and low-level design descriptions. Inspect the code to detect bugs, security vulnerabilities and maintainability issues. Native integration with Jenkins. Reports on duplicate code, unused objects and methods and naming conventions. Calculates software metrics and source lines of code. Code comparison: finds differences between several versions of the same code. Performance analysis: identifies code parts that slow down the application because of their syntax - it extracts statistics about code execution from the database and combines it with the static analysis of the code. == Usage == Visual Expert is used in several contexts: Change impact analysis: evaluating the consequences of a change in the code or in a database. Avoiding negative side effects when evolving a system. Static Application Security Testing (SAST): detecting and removing security issues. Continuous Integration / Continuous Inspection : adding a static code analysis job in a CI/CD workflow to automatically verify the quality and security of a new build when it is released. Program comprehension: helping programmers understand and maintain existing code, or modernize legacy systems. Transferring knowledge of the code, from one programmer to another. Software sizing: calculating the size of an application, or a piece of code, in order to estimate development efforts. Code review: improving the code by finding and removing code smells, dead code, code causing poor performances or violations of coding conventions. == Limitations == As a static code analyzer, Visual Expert is limited to the programming languages supported by its code parsers - Oracle PL/SQL, SQL Server Transact-SQL, PowerBuilder. A preliminary reverse engineering is required. Visual Expert does it automatically, but its duration depends on the size of the code parsed. Users must wait for the parsing completion prior to using the features, or schedule it in advance. They must also allocate sufficient hardware resources to support their volume of code. Visual Expert is based on a client/server architecture: the code analysis is running on a Windows PC - preferably a server. The information extracted from the code is stored in a RDBMS, communicating with a client application installed on the programmer's computer - no web client is available. This requires that the code, the parsers, the RDBMS and the programmers’ computers are connected to the same LAN or VPN. == History == 1995- 1998 - Prog and Doc - Initial version distributed on the French market 2001 - Visual Expert 4.5 2003 - Visual Expert 5 2007 - Visual Expert 5.7 2010 - Visual Expert 6.0 2015 - Visual Expert 2015 - Server component added to schedule code analyses 2016 - Visual Expert 2016 - Oracle PL/SQL code parser, code inventory (lines of code, number of objects…) 2017 - Visual Expert 2017 - SQL Server T-SQL code parser, Code comparison, CRUD matrix 2018 - Visual Expert 2018 - DB Code Performance Analysis, integration with TFS 2019 - Visual Expert 2019 - Generation of E/R diagrams from the code 2020 - Visual Expert 2020 - Object dependency matrix, naming consistency verification, integration with GIT and SVN 2021 - Visual Expert 2021 - Continuous Code Inspection, integration with Jenkins 2022 - Visual Expert 2022 - Support for cloud-based repositories and large volumes of code 2023 - Visual Expert 2023 - Performance tuning for PowerBuilder 2024 - Visual Expert 2024 - New web UI to simplify deployment and use among large teams. 2025 - Visual Expert 2025 - AI-based features to explain code, generate comments, and optimize queries
Read more →
Breakup Notifier

Breakup Notifier was a web application written by product developer and programmer Dan Loewenherz that enabled its registered users to track the relationship status of their Facebook friends. An email notification was sent to the user when one of their Facebook friends changed their relationship status. The app was one of the most viral Facebook app's at the time of its release. It was mentioned in a skit on The Jay Leno Show and news of its popularity was published in Time magazine, The New York Post, CNET, and The Globe and Mail. == Popularity and Facebook controversy == Breakup Notifier gathered 100,000 users in less than 24 hours of its launch and reached a user base of more than 3,000,000 in February 2011. Facebook then blocked the app. Loewenherz later created an app named Crush Notifier, which differs from the original app in that users can check if they have a mutual crush. Breakup Notifier was later unblocked by Facebook and monetized.
Read more →
Dave's Redistricting

Dave's Redistricting App (DRA) is an online web app originally created by Dave Bradlee that allows anyone to simulate redistricting a U.S. state's congressional and legislative districts. == Purpose == According to Bradlee, the software was designed to "put power in people's hands," and so that they "can see how the process works, so it's a little less mysterious than it was 10 years ago." Bradlee has noticed that many citizens are taking this process seriously and using his app to create legitimate redistricting maps that could be put in place. Some websites have called Bradlee the pioneer and cause of the rise of do-it-yourself redistricting. States such as Montana in 2021 allowed the general population to use it to submit redistricting proposals following the 2020 United States Census. Dave's Redistricting has frequently been mentioned as a resource that can be used to combat gerrymandering, given that the public has free access to it. Political science firms such as FiveThirtyEight have used the website to draw examples of gerrymandered districts, including on their famous Atlas of Redistricting. Dave Bradlee built the first generation of DRA. DRA 2020 is built by a small team of volunteers—Dave Bradlee, Terry Crowley, Alec Ramsay, and David Rinn—all with a shared passion for technology & democracy and all Microsoft veterans. Their mission is to empower civic organizations and citizen activists to advocate for fair congressional and legislative districts and increased transparency in the redistricting process. == Functions == Users can redraw the congressional and state legislative districts for all 50 states, the District of Columbia, and Puerto Rico using a variety of census and election datasets including Cook PVI. Maps can be optimized for different criteria. DRA 2020 added several major features to the first generation app: Sharing & collaborative editing of maps, like Google Docs Multiple statewide elections for all 50 states including the ability to import your own data Comprehensive analytics for evaluating and comparing maps Custom overlays, and Block-level editing DRA remains free to use. == Versions == 2.2: This uses Bing Maps, an outdated software that projects the districts of a single state onto a map of the United States. 2.5: After Bing Maps announced that it would no longer be updating for the foreseen future, the U.S. Map feature was removed. DRA 2020: At the end of 2018, a beta version of 2020 was released. This version that did not require Microsoft Silverlight and could be used in any web browser. DRA 2020 has been under continuous development since and is built using React (JavaScript library), Mapbox, OpenStreetMap, TypeScript, Node.js, Amazon Web Services, as well as many open source components, tools, and icons.
Read more →
Elasticity (computing)

In computing, elasticity is defined as "the degree to which a system is able to adapt to workload changes by provisioning and de-provisioning resources in an autonomic manner, such that at each point in time the available resources match the current demand as closely as possible". Elasticity is a defining characteristic that differentiates cloud computing from previously proposed distributed computing paradigms, such as grid computing. The dynamic adaptation of capacity, e.g., by altering the use of computing resources, to meet a varying workload is called "elastic computing". In the world of distributed systems, there are several definitions according to the authors; some consider the concepts of scalability a sub-part of elasticity, others as being distinct. == Purpose == Elasticity aims to match the amount of resources allocated to a service with the amount of resources it actually requires, avoiding over- or under-provisioning. Over-provisioning, i.e., allocating more resources than required, should be avoided as it may incur extra costs (monetary, energy, operational, etc.) for unused or underutilized resources. For example, if a website is over-provisioned with two cloud computing resources to handle current demand that only requires one resource, the costs of maintaining the second resource would effectively be wasted. Under-provisioning, i.e., allocating fewer resources than required, must be avoided; otherwise, the service cannot serve its users with a good service. For example, under-provisioning a website may make it seem slow or unreachable, because not enough resources have been allocated to meet current demand. == Example == Elasticity can be illustrated through an example of a service provider who wants to run a website on the cloud. At moment t 0 {\displaystyle t_{0}} , the website is unpopular and a single machine is sufficient to serve all users. At moment t 1 {\displaystyle t_{1}} , the website suddenly becomes popular, and a single machine is no longer sufficient to serve all users. Based on the number of web users simultaneously accessing the website and the resource requirements of the web server, ten machines are needed. An elastic system should immediately detect this condition and provision nine additional machines from the cloud to serve all users responsively. At time t 2 {\displaystyle t_{2}} , the website becomes unpopular again. The ten machines currently allocated to the website are mostly idle and a single machine would be sufficient to serve the few users who are accessing the website. An elastic system should immediately detect this condition and deprovision nine machines, releasing them to the cloud. == Problems == === Resource provisioning time === Resource provisioning takes time. A cloud virtual machine (VM) can be acquired at any time by the user; however, it may take up to several minutes for the acquired VM to be ready to use. The VM startup time is dependent on factors such as image size, VM type, data center location, number of VMs, etc. Cloud providers have different VM startup performance. This implies that any control mechanism designed for elastic applications must consider the time needed for the resource provisioning actions to take effect. === Monitoring elastic applications === Elastic applications can allocate and deallocate resources on demand for specific application components. This makes cloud resources volatile, and traditional monitoring tools which associate monitoring data with a particular resource, such as Ganglia or Nagios, are no longer suitable for monitoring the behavior of elastic applications. For example, during its lifetime, a data storage tier of an elastic application might add and remove data storage VMs due to cost and performance requirements, varying the number of used VMs. Thus, additional information is needed in monitoring elastic applications, such as associating the logical application structure over the underlying virtual infrastructure. This in turn generates other problems, such as data aggregation from multiple VMs towards extracting the behavior of the application component running on top of those VMs, as different metrics may need to be aggregated differently (e.g., CPU usage could be averaged, network transfer might be summed up). === Stakeholder requirements === When deploying applications in cloud infrastructures (IaaS/PaaS), stakeholder requirements need to be considered in order to ensure that elastic behavior meets stakeholder needs. Traditionally, the optimal trade-off between cost and quality or performance is considered; however, for real world cloud users, requirements regarding elastic behavior are more complex and target multiple dimensions of elasticity (e.g., SYBL). === Multiple levels of control === Cloud applications vary in type and complexity, with multiple levels of artifacts deployed in layers. Controlling such structures must take into consideration a variety of issues. For multi-level control, control systems need to consider the impact lower level control has upon higher level ones, and vice versa (e.g., controlling virtual machines, web containers, or web services in the same time), as well as conflicts that may appear between various control strategies from various levels. Elastic strategies on in cloud computing can take advantage of control-theoretic methods (e.g., predictive control has been experimented in cloud computing scenarios by showing considerable advantages with respect to reactive methods). One approach to multi-level elastic clouc control is rSYBL.
Read more →
Color image pipeline

An image pipeline or video pipeline is the set of components commonly used between an image source (such as a camera, a scanner, or the rendering engine in a computer game), and an image renderer (such as a television set, a computer screen, a computer printer or cinema screen), or for performing any intermediate digital image processing consisting of two or more separate processing blocks. An image/video pipeline may be implemented as computer software, in a digital signal processor, on an FPGA, or as fixed-function ASIC. In addition, analog circuits can be used to do many of the same functions. Typical components include image sensor corrections (including debayering or applying a Bayer filter), noise reduction, image scaling, gamma correction, image enhancement, colorspace conversion (between formats such as RGB, YUV or YCbCr), chroma subsampling, framerate conversion, image compression/video compression (such as JPEG), and computer data storage/data transmission. Typical goals of an imaging pipeline may be perceptually pleasing end-results, colorimetric precision, a high degree of flexibility, low cost/low CPU utilization/long battery life, or reduction in bandwidth/file size. Some functions may be algorithmically linear. Mathematically, those elements can be connected in any order without changing the end-result. As digital computers use a finite approximation to numerical computing, this is in practice not true. Other elements may be non-linear or time-variant. For both cases, there is often one or a few sequences of components that makes sense for optimum precision and minimum hardware-cost/CPU-load.
Read more →
Magiran

Magiran (Persian: مگیران)—Iran's publications database—is a digital library that was founded in 2000 and includes digitized versions of scientific journals, which currently provides the possibility of searching among the full text of 1,500 journals. Registration is required for full access to the database, but access to some items such as newspapers is also possible without registration. A list of Iranian researchers is also maintained there.
Read more →
Douglas Parkhill

Douglas F. Parkhill is a Canadian technologist and former research minister, best known for his pioneering work on what is now called cloud computing, and his work on Canada's Telidon videotex project. He started working at the Canadian ministry of Communications (now part of the Department of Trade and Industry) in 1969, having previously worked at the Mitre Corporation. He was responsible for many activities in communications satellites, computer communications, command and control systems and telecommunications. He was winner of the Treasury Board of Canada Secretariat's Outstanding Achievement award in 1982, the Conestoga shield for services to government and industry in computer communications research and development, the Touche Ross award for Telidon development. He was an author of several publications including the 1966 book, The Challenge of the Computer Utility. In the book, Parkhill thoroughly explored many of the modern-day characteristics of cloud computing (elastic provisioning through a utility service) as well as the comparison to the electricity industry and the use of public, private, government and community forms. The book won the McKinsey Foundation award for distinguished contributions to management literature. He worked with Dave Godfrey, the Canadian writer and novelist on a later book Gutenberg two about the social and political meaning of computer technology. He was in charge of research at the Federal Department of Communications at the time when the department was funding development of the Telidon videotext system, was heavily involved in promoting the system, and had overall control of the program. In a radio broadcast in 1980, he outlined some of the potential of the system, from financial information, to theatre reservations, with the ability to pay and print out tickets from the system. He later documented the history of the Telidon project, and the history of videotext in general. == Publications == The Challenge of the Computer Utility, Addison-Wesley, 1966, ISBN 0-201-05720-4 edited with Dave Godfrey, Gutenberg Two: The New Electronics and Social Change, Press Porcepic, 1979, ISBN 0-88878-191-1 The Beginning of a Beginning. Ottawa; Department of Communications, 1987. A history of the Telidon project.
Read more →
Color space

A color space is a specific organization of colors. In combination with color profiling supported by various physical devices, it supports reproducible representations of color – whether such representation entails an analog or a digital representation. A color space may be arbitrary, i.e. with physically realized colors assigned to a set of physical color swatches with corresponding assigned color names (including discrete numbers in – for example – the Pantone collection), or structured with mathematical rigor (as with the NCS System, Adobe RGB and sRGB). A "color space" is a useful conceptual tool for understanding the color capabilities of a particular device or digital file. When trying to reproduce color on another device, color spaces can show whether shadow/highlight detail and color saturation can be retained, and by how much either will be compromised. A "color model" is an abstract mathematical model describing the way colors can be represented as tuples of numbers (e.g. triples in RGB or quadruples in CMYK); however, a color model with no associated mapping function to an absolute color space is a more or less arbitrary color system with no connection to any globally understood system of color interpretation. Adding a specific mapping function between a color model and a reference color space establishes within the reference color space a definite "footprint", known as a gamut, and for a given color model, this defines a color space. For example, Adobe RGB and sRGB are two different absolute color spaces, both based on the RGB color model. When defining a color space, the usual reference standard is the CIELAB or CIEXYZ color spaces, which were specifically designed to encompass all colors the average human can see. Since "color space" identifies a particular combination of the color model and the mapping function, the word is often used informally to identify a color model. However, even though identifying a color space automatically identifies the associated color model, this usage is incorrect in a strict sense. For example, although several specific color spaces are based on the RGB color model, there is no such thing as the singular RGB color space. == History == In 1802, Thomas Young postulated the existence of three types of photoreceptors (now known as cone cells) in the eye, each of which was sensitive to a particular range of visible light. Hermann von Helmholtz developed the Young–Helmholtz theory further in 1850: that the three types of cone photoreceptors could be classified as short-preferring (blue), middle-preferring (green), and long-preferring (red), according to their response to the wavelengths of light striking the retina. The relative strengths of the signals detected by the three types of cones are interpreted by the brain as a visible color. But it is not clear that they thought of colors as being points in color space. The color-space concept was likely due to Hermann Grassmann, who developed it in two stages. First, he developed the idea of vector space, which allowed the algebraic representation of geometric concepts in n-dimensional space. Fearnley-Sander (1979) describes Grassmann's foundation of linear algebra as follows: The definition of a linear space (vector space)... became widely known around 1920, when Hermann Weyl and others published formal definitions. In fact, such a definition had been given thirty years previously by Peano, who was thoroughly acquainted with Grassmann's mathematical work. Grassmann did not put down a formal definition—the language was not available—but there is no doubt that he had the concept. With this conceptual background, in 1853, Grassmann published a theory of how colors mix; it and its three color laws are still taught, as Grassmann's law. As noted first by Grassmann... the light set has the structure of a cone in the infinite-dimensional linear space. As a result, a quotient set (with respect to metamerism) of the light cone inherits the conical structure, which allows color to be represented as a convex cone in the 3- D linear space, which is referred to as the color cone. == Examples == Colors can be created in printing with color spaces based on the CMYK color model, using the subtractive primary colors of pigment (cyan, magenta, yellow, and key [black]). To create a three-dimensional representation of a given color space, we can assign the amount of magenta color to the representation's X axis, the amount of cyan to its Y axis, and the amount of yellow to its Z axis. The resulting 3-D space provides a unique position for every possible color that can be created by combining those three pigments. Colors can be created on computer monitors with color spaces based on the RGB color model, using the additive primary colors (red, green, and blue). A three-dimensional representation would assign each of the three colors to the X, Y, and Z axes. Colors generated on a given monitor will be limited by the reproduction medium, such as the phosphor (in a CRT monitor) or filters and backlight (LCD monitor). Another way of creating colors on a monitor is with an HSL or HSV color model, based on hue, saturation, brightness (value/lightness). With such a model, the variables are assigned to cylindrical coordinates. Many color spaces can be represented as three-dimensional values in this manner, but some have more, or fewer dimensions, and some, such as Pantone, cannot be represented in this way at all. == Conversion == Color space conversion is the translation of the representation of a color from one basis to another. This typically occurs in the context of converting an image that is represented in one color space to another color space, the goal being to make the translated image look as similar as possible to the original. == RGB density == The RGB color model is implemented in different ways, depending on the capabilities of the system used. The most common incarnation in general use as of 2021 is the 24-bit implementation, with 8 bits, or 256 discrete levels of color per channel. Any color space based on such a 24-bit RGB model is thus limited to a range of 256×256×256 ≈ 16.7 million colors. Some implementations use 16 bits per component for 48 bits total, resulting in the same gamut with a larger number of distinct colors. This is especially important when working with wide-gamut color spaces (where most of the more common colors are located relatively close together), or when a large number of digital filtering algorithms are used consecutively. The same principle applies for any color space based on the same color model, but implemented at different bit depths. == Lists == CIE 1931 XYZ color space was one of the first attempts to produce a color space based on measurements of human color perception (earlier efforts were by James Clerk Maxwell, König & Dieterici, and Abney at Imperial College) and it is the basis for almost all other color spaces. The CIERGB color space is a linearly-related companion of CIE XYZ. Additional derivatives of CIE XYZ include the CIELUV, CIEUVW, and CIELAB. === Generic === RGB uses additive color mixing, because it describes what kind of light needs to be emitted to produce a given color. RGB stores individual values for red, green and blue. RGBA is RGB with an additional channel, alpha, to indicate transparency. Common color spaces based on the RGB model include sRGB, Adobe RGB, ProPhoto RGB, scRGB, and CIE RGB. CMYK uses subtractive color mixing used in the printing process, because it describes what kind of inks need to be applied so the light reflected from the substrate and through the inks produces a given color. One starts with a white substrate (canvas, page, etc.), and uses ink to subtract color from white to create an image. CMYK stores ink values for cyan, magenta, yellow and black. There are many CMYK color spaces for different sets of inks, substrates, and press characteristics (which change the dot gain or transfer function for each ink and thus change the appearance). YIQ was formerly used in NTSC (North America, Japan and elsewhere) television broadcasts for historical reasons. This system stores a luma value roughly analogous to (and sometimes incorrectly identified as) luminance, along with two chroma values as approximate representations of the relative amounts of blue and red in the color. It is similar to the YUV scheme used in most video capture systems and in PAL (Australia, Europe, except France, which uses SECAM) television, except that the YIQ color space is rotated 33° with respect to the YUV color space and the color axes are swapped. The YDbDr scheme used by SECAM television is rotated in another way. YPbPr is a scaled version of YUV. It is most commonly seen in its digital form, YCbCr, used widely in video and image compression schemes such as MPEG and JPEG. xvYCC is an international digital video color space standard published by the IEC (IEC 61966-2-4). It is based on the ITU BT.601 and BT.709
Read more →
The Outliner of Giants

The Outliner of Giants was commercial outlining software. Like other outliners, it allowed the user to create a document consisting of a series of nested lists. It was one of a number of browser-based outliners that are delivered as a web application, used through a web browser, rather than being installed as a stand-alone application. The Outliner of Giants was released in 2009. The service was shut down on December 31, 2017 and only exports are allowed at this time. == Feature set == Unlike most other browser-based outliners - which often focus on providing a minimum viable product - the Outliner of Giants had much of the functionality typically associated with a desktop outliner, such as the ability to use of columns to structure information. However, The Outliner of Giants did not support offline editing, requiring an active internet connection in order to make changes to an outline document. === Outlining === Like all outliners, The Outliner of Giants supported the creation of a hierarchy of items, with users modifying the parent-child relationship between items in order to structure a document. This included the ability to promote or demote items up or down the hierarchy, or move an item up or down a list of siblings on the same level. The Outliner of Giants did not support the true cloning of items (where an item can appear to be in multiple places within the hierarchy at the same time), although it did support the copying of single or multiple nodes. === Import === The Outliner of Giants could import both plain text and the OPML XML format, which is commonly used to transfer data between outlining applications. === Editing === Outline documents could be edited using a WYSIWYG editor, as well as the Markdown, and Textile markup languages. === Annotation === The Outliner of Giants supported functions to annotate an outline, such as the ability to add colored labels, highlights and text, as well as tags and hashtags. === Collaboration === The Outliner of Giants supported real-time collaboration, where multiple users could edit the same document, and can see the changes made by another user as they happened. === Publication === Outlines created through The Outliner of Giants could be published directly online through the service, either as outlines, pages or in a blog format. === Export === The Outliner of Giants can export outline data as plain text, HTML, as well as directly to the Google Docs word processor.
Read more →
Resolution enhancement technology

Resolution enhancement technology (RET) is a form of image processing technology used to manipulate dot characteristics popular among laser printer and inkjet printer manufacturers. Closely related RET techniques are also used in VLSI photolithography manufacturing technology, in particular in relation to 90 nanometre technology. Resolution refers to the sharpness of image detail, smoothness of curved lines, and the faithful reproduction of an image. In both cases, RET uses pre-compensation of the image in order to try to mitigate the effects of the printing process. Among the major issues in RET in VLSI technology are the fundamental properties of a wave: amplitude, phase, and direction.
Read more →
List of online database creator apps

This list of online database creator apps lists notable web apps where end users with minimal database administration expertise can create online databases to share with team members. Users need not have the coding skills to manage the solution stack themselves, because the web app already provides this predefined functionality. Such online database creator apps serve the gap between IT professionals (who can manage such a stack themselves) and people who would not create databases at all anyway. In other words, they provide a low-code way of doing database administration. As the concept of low-code development in general continues to evolve, some of the brands that began as online database creator apps are evolving into low-code development platforms for both the databases and the custom apps that use them. Airtable Bubble Caspio Coda.io Microsoft Access web apps plus SharePoint Oracle Application Express aka APEX Quickbase WaveMaker Rapid ZohoCreator
Read more →
StatCrunch

StatCrunch is a web-based statistical software application from Pearson Education. StatCrunch was originally created for use in college statistics courses. As a full-featured statistics package, it is now also used for research and for other statistical analysis purposes. == History == American statistics professor Webster West created StatCrunch in 1997. Over the next 19 years West assisted by others added many more statistical procedures and graphing capabilities, and made user interface improvements. In 2005, West received two awards for StatCrunch: the CAUSEweb Resource of the Year Award and the MERLOT Classics Award. In 2013, the StatCrunch Java code was rewritten in JavaScript in order to avoid Java browser security problems, and so that it would run on iOS and Android. In 2015, new ways of importing data were added, including importing multi-page data directly from Wikipedia tables and other Web sources, and also importing with drag-and-drop for various data formats. In 2016, StatCrunch was acquired by Pearson Education, which had already been serving as the primary distributor of StatCrunch for several years. == Software == A StatCrunch license is included with many of Pearson's statistical textbooks. Because StatCrunch is a web application, it works on multiple platforms, including Windows, macOS, iOS, and Android. Data in StatCrunch is represented in a "data table" view, which is similar to a spreadsheet view, but unlike spreadsheets, the cells in a data table can only contain numbers or text. Formulas cannot be stored in these cells. There are many ways to import data into StatCrunch. Data can be typed directly into cells in the data table. Entire blocks of data may be cut-and-pasted into the data table. Text files (.csv, .txt, etc.) and Microsoft Excel files (.xls and .xlsx) can be drag-and-dropped into the data table. Data can be pulled into StatCrunch directly from Wikipedia tables or other Web tables, including multi-page tables. Data can be loaded directly from Google Drive and Dropbox. Shared data sets saved by other StatCrunch community users can be searched for by title or keyword and opened in a data table. Graphs, results, and reports created by StatCrunch can be shared with other users, in addition to the sharing of data sets. StatCrunch has a library of data transformation functions. StatCrunch can also recode and reorganize data. All data is stored in memory, and all processing happens on the client, so response is fast, even with large data sets. StatCrunch can interact with multiple graphs simultaneously. If a user selects a data point on one graph, then that same data point is highlighted on all other displayed graphs. In addition to standard statistical and graphing procedures, StatCrunch has a collection of about forty "applets" which illustrate statistical concepts interactively.
Read more →