AI By Zapier Logo

AI By Zapier Logo — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Protocol engineering

  Protocol engineering is the application of systematic methods to the development of communication protocols. It uses many of the principles of software engineering, but it is specific to the development of distributed systems. == History == When the first experimental and commercial computer networks were developed in the 1970s, the concept of protocols was not yet well developed. These were the first distributed systems. In the context of the newly adopted layered protocol architecture (see OSI model), the definition of the protocol of a specific layer should be such that any entity implementing that specification in one computer would be compatible with any other computer containing an entity implementing the same specification, and their interactions should be such that the desired communication service would be obtained. On the other hand, the protocol specification should be abstract enough to allow different choices for the implementation on different computers. It was recognized that a precise specification of the expected service provided by the given layer was important. It is important for the verification of the protocol, which should demonstrate that the communication service is provided if both protocol entities implement the protocol specification correctly. This principle was later followed during the standardization of the OSI protocol stack, in particular for the transport layer. It was also recognized that some kind of formalized protocol specification would be useful for the verification of the protocol and for developing implementations, as well as test cases for checking the conformance of an implementation against the specification. While initially mainly finite-state machine were used as (simplified) models of a protocol entity, in the 1980s three formal specification languages were standardized, two by ISO and one by ITU. The latter, called SDL, was later used in industry and has been merged with UML state machines. == Principles == The following are the most important principles for the development of protocols: Layered architecture: A protocol layer at the level n consists of two (or more) entities that have a service interface through which the service of the layer is provided to the users of the protocol, and which uses the service provided by a local entity of level (n-1). The service specification of a layer describes, in an abstract and global view, the behavior of the layer as visible at the service interfaces of the layer. The protocol specification defines the requirements that should be satisfied by each entity implementation. Protocol verification consists of showing that two (or more) entities satisfying the protocol specification will provide at their service interfaces the specified service of that layer. The (verified) protocol specification is used mainly for the following two activities: The development of an entity implementation. Note that the abstract properties of the service interface are defined by the service specification (and also used by the protocol specification), but the detailed nature of the interface can be chosen during the implementation process, separately for each entity. Test suite development for conformance testing. Protocol conformance testing checks that a given entity implementation conforms to the protocol specification. The conformance test cases are developed based on the protocol specification and are applicable to all entity implementations. Therefore standard conformance test suites have been developed for certain protocol standards. == Methods and tools == Tools for the activities of protocol verification, entity implementation and test suite development can be developed when the protocol specification is written in a formalized language which can be understood by the tool. As mentioned, formal specification languages have been proposed for protocol specification, and the first methods and tools where based on finite-state machine models. Reachability analysis was proposed to understand all possible behaviors of a distributed system, which is essential for protocol verification. This was later complemented with model checking. However, finite-state descriptions are not powerful enough to describe constraints between message parameters and the local variables in the entities. Such constraints can be described by the standardized formal specification languages mentioned above, for which powerful tools have been developed. It is in the field of protocol engineering that model-based development was used very early. These methods and tools have later been used for software engineering as well as hardware design, especially for distributed and real-time systems. On the other hand, many methods and tools developed in the more general context of software engineering can also be used of the development of protocols, for instance model checking for protocol verification, and agile methods for entity implementations. == Constructive methods for protocol design == Most protocols are designed by human intuition and discussions during the standardization process. However, some methods have been proposed for using constructive methods possibly supported by tools to automatically derive protocols that satisfy certain properties. The following are a few examples: Semi-automatic protocol synthesis: The user defines all message sending actions of the entities, and the tool derives all necessary reception actions (even if several messages are in transit). Synchronizing protocol: The state transitions of one protocol entity are given by the user, and the method derives the behavior of the other entity such that it remains in states that correspond to the former entity. Protocol derived from service specification: The service specification is given by the user and the method derives a suitable protocol for all entities. Protocol for control applications: The specification of one entity (called the plant - which must be controlled) is given, and the method derives a specification of the other entity such that certain fail states of the plant are never reached and certain given properties of the plant's service interactions are satisfied. This is a case of supervisory control. == Books == Ming T. Liu, Protocol Engineering, Advances in Computers, Volume 29, 1989, Pages 79–195. G.J. Holzmann, Design and Validation of Computer Protocols, Prentice Hall, 1991. H. König, Protocol Engineering, Springer, 2012. M. Popovic, Communication Protocol Engineering, CRC Press, 2nd Ed. 2018. P. Venkataram, S.S. Manvi, B.S. Babu, Communication Protocol Engineering, 2014.

  Read more →
• 

  Coherent extrapolated volition

  Coherent extrapolated volition (CEV) is a theoretical framework in the field of AI alignment describing an approach by which an artificial superintelligence (ASI) would act on a benevolent supposition of what humans would want if they were more knowledgeable, more rational, had more time to think, and had matured together as a society, as opposed to humanity's current individual or collective preferences. It was proposed by Eliezer Yudkowsky in 2004 as part of his work on friendly AI. == Concept == CEV proposes that an advanced AI system should derive its goals by extrapolating the idealized volition of humanity. This means aggregating and projecting human preferences into a coherent utility function that reflects what people would desire under ideal epistemic and moral conditions. The aim is to ensure that AI systems are aligned with humanity's true interests, rather than with transient or poorly informed preferences. In poetic terms, our coherent extrapolated volition is our wish if we knew more, thought faster, were more the people we wished we were, had grown up farther together; where the extrapolation converges rather than diverges, where our wishes cohere rather than interfere; extrapolated as we wish that extrapolated, interpreted as we wish that interpreted. == Debate == Yudkowsky and Nick Bostrom note that CEV has several interesting properties. It is designed to be humane and self-correcting, by capturing the source of human values instead of trying to list them. It avoids the difficulty of laying down an explicit, fixed list of rules. It encapsulates moral growth, preventing flawed current moral beliefs from getting locked in. It limits the influence that a small group of programmers can have on what the ASI would value, thus also reducing the incentives to build ASI first. And it keeps humanity in charge of its destiny. CEV also faces significant theoretical and practical challenges. Bostrom notes that CEV has "a number of free parameters that could be specified in various ways, yielding different versions of the proposal." One such parameter is the extrapolation base (whose extrapolated volition is taken into account). For example, whether it should include people with severe dementia, patients in a vegetative state, foetuses, or embryos. He also notes that if CEV's extrapolation base only includes humans, there is a risk that the result would be ungenerous toward other animals and digital minds. One possible solution would be to include a mechanism to expand CEV's extrapolation base. == Variants and alternatives == A proposed theoretical alternative to CEV is to rely on an artificial superintelligence's superior cognitive capabilities to figure out what is morally right, and let it act accordingly. It is also possible to combine both techniques, for instance with the ASI following CEV except when it is morally impermissible. In another review, a philosophical analysis explores CEV through the lens of social trust in autonomous systems. Drawing on Anthony Giddens' concept of "active trust", the author proposes an evolution of CEV into "Coherent, Extrapolated and Clustered Volition" (CECV). This formulation aims to better reflect the moral preferences of diverse cultural groups, thus offering a more pragmatic ethical framework for designing AI systems that earn public trust while accommodating societal diversity.

  Read more →
• 

  Coupled pattern learner

  Coupled Pattern Learner (CPL) is a machine learning algorithm which couples the semi-supervised learning of categories and relations to forestall the problem of semantic drift associated with boot-strap learning methods. == Coupled Pattern Learner == Semi-supervised learning approaches using a small number of labeled examples with many unlabeled examples are usually unreliable as they produce an internally consistent, but incorrect set of extractions. CPL solves this problem by simultaneously learning classifiers for many different categories and relations in the presence of an ontology defining constraints that couple the training of these classifiers. It was introduced by Andrew Carlson, Justin Betteridge, Estevam R. Hruschka Jr. and Tom M. Mitchell in 2009. == CPL overview == CPL is an approach to semi-supervised learning that yields more accurate results by coupling the training of many information extractors. Basic idea behind CPL is that semi-supervised training of a single type of extractor such as ‘coach’ is much more difficult than simultaneously training many extractors that cover a variety of inter-related entity and relation types. Using prior knowledge about the relationships between these different entities and relations CPL makes unlabeled data as a useful constraint during training. For e.g., ‘coach(x)’ implies ‘person(x)’ and ‘not sport(x)’. == CPL description == === Coupling of predicates === CPL primarily relies on the notion of coupling the learning of multiple functions so as to constrain the semi-supervised learning problem. CPL constrains the learned function in two ways. Sharing among same-arity predicates according to logical relations Relation argument type-checking === Sharing among same-arity predicates === Each predicate P in the ontology has a list of other same-arity predicates with which P is mutually exclusive. If A is mutually exclusive with predicate B, A’s positive instances and patterns become negative instances and negative patterns for B. For example, if ‘city’, having an instance ‘Boston’ and a pattern ‘mayor of arg1’, is mutually exclusive with ‘scientist’, then ‘Boston’ and ‘mayor of arg1’ will become a negative instance and a negative pattern respectively for ‘scientist.’ Further, Some categories are declared to be a subset of another category. For e.g., ‘athlete’ is a subset of ‘person’. === Relation argument type-checking === This is a type checking information used to couple the learning of relations and categories. For example, the arguments of the ‘ceoOf’ relation are declared to be of the categories ‘person’ and ‘company’. CPL does not promote a pair of noun phrases as an instance of a relation unless the two noun phrases are classified as belonging to the correct argument types. === Algorithm description === Following is a quick summary of the CPL algorithm. Input: An ontology O, and a text corpus C Output: Trusted instances/patterns for each predicate for i=1,2,...,∞ do foreach predicate p in O do EXTRACT candidate instances/contextual patterns using recently promoted patterns/instances; FILTER candidates that violate coupling; RANK candidate instances/patterns; PROMOTE top candidates; end end ==== Inputs ==== A large corpus of Part-Of-Speech tagged sentences and an initial ontology with predefined categories, relations, mutually exclusive relationships between same-arity predicates, subset relationships between some categories, seed instances for all predicates, and seed patterns for the categories. ==== Candidate extraction ==== CPL finds new candidate instances by using newly promoted patterns to extract the noun phrases that co-occur with those patterns in the text corpus. CPL extracts, Category Instances Category Patterns Relation Instances Relation Patterns ==== Candidate filtering ==== Candidate instances and patterns are filtered to maintain high precision, and to avoid extremely specific patterns. An instance is only considered for assessment if it co-occurs with at least two promoted patterns in the text corpus, and if its co-occurrence count with all promoted patterns is at least three times greater than its co-occurrence count with negative patterns. ==== Candidate ranking ==== CPL ranks candidate instances using the number of promoted patterns that they co-occur with so that candidates that occur with more patterns are ranked higher. Patterns are ranked using an estimate of the precision of each pattern. ==== Candidate promotion ==== CPL ranks the candidates according to their assessment scores and promotes at most 100 instances and 5 patterns for each predicate. Instances and patterns are only promoted if they co-occur with at least two promoted patterns or instances, respectively. == Meta-Bootstrap Learner == Meta-Bootstrap Learner (MBL) was also proposed by the authors of CPL. Meta-Bootstrap learner couples the training of multiple extraction techniques with a multi-view constraint, which requires the extractors to agree. It makes addition of coupling constraints on top of existing extraction algorithms, while treating them as black boxes, feasible. MBL assumes that the errors made by different extraction techniques are independent. Following is a quick summary of MBL. Input: An ontology O, a set of extractors ε Output: Trusted instances for each predicate for i=1,2,...,∞ do foreach predicate p in O do foreach extractor e in ε do Extract new candidates for p using e with recently promoted instances; end FILTER candidates that violate mutual-exclusion or type-checking constraints; PROMOTE candidates that were extracted by all extractors; end end Subordinate algorithms used with MBL do not promote any instance on their own, they report the evidence about each candidate to MBL and MBL is responsible for promoting instances. == Applications == In their paper authors have presented results showing the potential of CPL to contribute new facts to existing repository of semantic knowledge, Freebase

  Read more →
• 

  Prompt engineering

  Prompt engineering is the process of structuring natural language inputs (known as prompts) to produce specified outputs from a generative artificial intelligence (GenAI) model. Context engineering is the related area of software engineering that focuses on the management of non-prompt contexts supplied to the GenAI model, such as metadata, API tools, and tokens. It can also be defined as the practice of designing and refining input instructions given to a generative AI model to produce more accurate, relevant, or useful outputs. Effective prompt engineering involves understanding how a model interprets language, and may include techniques such as few-shot prompting, chain-of-thought prompting, and role assignment. It is increasingly considered a skill for working with large language models (LLMs) in both research and professional contexts. During the 2020s AI boom, prompt engineering became regarded as a business capability across corporations and industries. Employees with the title prompt engineer were hired to create prompts that would increase productivity and efficacy, although the individual title has since lost traction amid AI models that produce better prompts than humans and corporate training in prompting for general employees. Common prompting techniques include multi-shot, chain-of-thought, and tree-of-thought prompting, as well as the use of assigning roles to the model. Automated prompt generation methods, such as retrieval-augmented generation (RAG), provide for greater accuracy and a wider scope of functions for prompt engineers. Prompt injection is a type of cybersecurity attack that targets machine learning models through malicious prompts. == Terminology == The Oxford English Dictionary defines prompt engineering as "The action or process of formulating and refining prompts for an artificial intelligence program, algorithm, etc., in order to optimize its output or to achieve a desired outcome; the discipline or profession concerned with this." In 2023, prompt ("an instruction given to an artificial intelligence program, algorithm, etc., which determines or influences the content it generates") was the runner-up to Oxford's word of the year. === Prompt === A prompt is some natural language text that describes and prescribes the task that an artificial intelligence (AI) should perform. A prompt for a text-to-text language model can be a query, a command, or a longer statement referencing context, instructions, and conversation history. The process of prompt engineering may involve designing clear queries, refining wording, providing relevant context, specifying the style of output, and assigning a character for the AI to mimic in order to guide the model toward more accurate, useful, and consistent responses. When communicating with a text-to-image or a text-to-audio model, a typical prompt contains a description of a desired output such as "a high-quality photo of an astronaut riding a horse" or "Lo-fi slow BPM electro chill with organic samples". Prompt engineering may be applied to text-to-image models to achieve a desired subject, style, layout, lighting, and aesthetic. === Techniques === Common terms used to describe various specific prompt engineering techniques include chain-of-thought, tree-of-thought, and retrieval-augmented generation (RAG). A 2024 survey of the field identified over 50 distinct text-based prompting techniques, 40 multimodal variants, and a vocabulary of 33 terms used across prompting research, highlighting a present lack of standardised terminology for prompt engineering. Vibe coding is an AI-assisted software development method where a user prompts an LLM with a description of what they want and lets it generate or edit the code. In 2025, "vibe coding" was the Collins Dictionary word of the year. === Context engineering === Context engineering is a related process that focuses on the context elements that accompany user prompts, which include system instructions, retrieved knowledge, tool definitions, conversation summaries, and task metadata. Context engineering is performed to improve reliability, provenance and token efficiency in production LLM systems. The concept emphasises operational practices such as token budgeting, provenance tags, versioning of context artifacts, observability (logging which context was supplied), and context regression tests to ensure that changes to supplied context do not silently alter system behaviour. == Rationale == Research has found that the performance of large language models (LLMs) is highly sensitive to choices such as the ordering of examples, the quality of demonstration labels, and even small variations in phrasing. In some cases, reordering examples in a prompt produced accuracy shifts of more than 40 percent. === In-context learning === A model's ability to temporarily learn from prompts is known as in-context learning. In-context learning is an emergent ability of large language models. It is an emergent property of model scale, meaning that breaks in scaling laws occur, leading to its efficacy increasing at a different rate in larger models than in smaller models. Unlike training and fine-tuning, which produce lasting changes, in-context learning is temporary. Training models to perform in-context learning can be viewed as a form of meta-learning, or "learning to learn". === Prompting to estimate model sensitivity === Research consistently demonstrates that LLMs are highly sensitive to subtle variations in prompt formatting, structure, and linguistic properties. Some studies have shown up to 76 accuracy points across formatting changes in few-shot settings. Linguistic features significantly influence prompt effectiveness—such as morphology, syntax, and lexico-semantic changes—which meaningfully enhance task performance across a variety of tasks. Clausal syntax, for example, improves consistency and reduces uncertainty in knowledge retrieval. This sensitivity persists even with larger model sizes, additional few-shot examples, or instruction tuning. To address sensitivity of models and make them more robust, several evaluative methods have been proposed. FormatSpread facilitates systematic analysis by evaluating a range of plausible prompt formats, offering a more comprehensive performance interval. Similarly, PromptEval estimates performance distributions across diverse prompts, enabling robust metrics such as performance quantiles and accurate evaluations under constrained budgets. == Prompting techniques == === Multi-shot === A prompt may include a few examples for a model to learn from in context, an approach called few-shot learning. For example, the prompt may ask the model to complete "maison → house, chat → cat, chien →", with the expected response being dog. === Chain-of-thought === Chain-of-thought (CoT) prompting is a technique that allows large language models (LLMs) to solve a problem as a series of intermediate steps before giving a final answer. In 2022, Google Brain reported that chain-of-thought prompting improves reasoning ability by inducing the model to answer a multi-step problem with steps of reasoning that mimic a train of thought. Chain-of-thought techniques were developed to help LLMs handle multi-step reasoning tasks, such as arithmetic or commonsense reasoning questions. When applied to PaLM, a 540 billion parameter language model, according to Google, CoT prompting significantly aided the model, allowing it to perform comparably with task-specific fine-tuned models on several tasks, achieving state-of-the-art results at the time on the GSM8K mathematical reasoning benchmark. It is possible to fine-tune models on CoT reasoning datasets to enhance this capability further and stimulate better interpretability. As originally proposed by Google, each CoT prompt is accompanied by a set of input/output examples—called exemplars—to demonstrate the desired model output, making it a few-shot prompting technique. However, according to a later paper from researchers at Google and the University of Tokyo, simply appending the words "Let's think step-by-step" was also effective, which allowed for CoT to be employed as a zero-shot technique. ==== Self-consistency ==== Self-consistency performs several chain-of-thought rollouts, then selects the most commonly reached conclusion out of all the rollouts. === Tree-of-thought === Tree-of-thought prompting generalizes chain-of-thought by generating multiple lines of reasoning in parallel, with the ability to backtrack or explore other paths. It can use tree search algorithms like breadth-first, depth-first, or beam. === Text-to-image prompting === In 2022, text-to-image models like DALL-E 2, Stable Diffusion, and Midjourney were released to the public. These models take text prompts as input and use them to generate images. Early text-to-image models typically do not understand negation, grammar and sentence structure in the same way as large language models, and may thus requi

  Read more →
• 

  Intelligent automation

  Intelligent automation (IA), or intelligent process automation, is a software term that refers to a combination of artificial intelligence (AI) and robotic process automation (RPA). Companies use intelligent automation to cut costs and streamline tasks by using artificial-intelligence-powered robotic software to mitigate repetitive tasks. As it accumulates data, the system learns in an effort to improve its efficiency. Intelligent automation applications consist of, but are not limited to, pattern analysis, data assembly, and classification. The term is similar to hyperautomation, a concept identified by research group Gartner as being one of the top technology trends of 2020. == Technology == Intelligent automation applies the assembly line concept of breaking tasks into repetitive steps to improve business processes. Rather than having humans perform each step, intelligent automation can replace steps with an intelligent software robot, improving efficiency. Intelligent automation integrates robotic process automation (RPA) with artificial intelligence techniques (such as machine learning, natural-language processing, and computer vision) enabling systems to interpret data, make decisions, and adapt to changing inputs. Modern platforms use a layered architecture combining workflow orchestration, low-code tools, integration middleware, and AI services to coordinate bots and data pipelines across organisational systems. == Applications == Intelligent automation is used to process unstructured content. Common real-world applications include self-driving cars, self-checkouts at grocery stores, smart home assistants, and appliances. Businesses can apply data and machine learning to build predictive analytics that react to consumer behavior changes, or to implement RPA to improve manufacturing floor operations. For example, the technology has also been used to automate the workflow behind distributing COVID-19 vaccines. Data provided by hospital systems’ electronic health records can be processed to identify and educate patients, and schedule vaccinations. Intelligent automation can provide real-time insights on profitability and efficiency. However, in an April 2022 survey by Alchemmy, despite three quarters of businesses acknowledging the importance of Artificial Intelligence to their future development, just a quarter of business leaders (25%) considered Intelligent Automation a “game changer” in understanding current performance. 42% of CTOs see “shortage of talent” as the main obstacle to implementing Intelligent Automation in their business, while 36% of CEOs see ‘upskilling and professional development of existing workforce’ as the most significant adoption barrier. IA is becoming increasingly accessible for firms of all sizes. With this in mind, it is expected to continue to grow rapidly in all industries. This technology has the potential to change the workforce. As it advances, it will be able to perform increasingly complex and difficult tasks. In addition, this may expose certain workforce issues as well as change how tasks are allocated. Tools such as Semrush's AI Visibility Toolkit and Enterprise AIO reflect these developments by analysing how entities are referenced and represented within responses produced by large-language-model-based systems. == Benefits == Streamline processes: Repetitive manual tasks can put a strain on the workforce. However, with AI agents, these tasks can be automated to allow teams to focus on more important matters that require human cognition. Intelligent automation can also be used to mitigate tasks with human error which in turn increases proficiency. This allows the opportunity for firms to scale production without the traditional negative consequences such as reduced quality or increased risk. Customer service improvement: Customer service can be significantly improved, providing the firm with a competitive advantage. IA utilizing chat features allows for instant curated responses to customers. In addition, it can give updates to customers, make appointments, manage calls, and personalize campaigns. Flexibility: Due to the wide range of applications, IA is useful across a variety of fields, technologies, projects and industries. In addition, IA can be integrated with current automated systems in place. This allows for optimized systems unique to each firm to best fit their individual needs. == Capabilities == Cognitive automation: Employs AI techniques to assist humans in decision-making and task completion Natural language processing: Allows computers to automate knowledge work Business process management: Enhances the consistency and agility of corporate operations Process mining: Applies data mining methods to discover, analyze, and improve business processes Intelligent document processing: Utilizes OCR and other advanced technologies to extract data from documents and convert it into structured, usable data Computer vision: Allows computers to extract information from digital images, videos, and other visual inputs Integration automation: Establishes a unified platform with automated workflows that integrate data, applications, and devices.

  Read more →
• 

  Class activation mapping

  Class activation mapping methods are explainable AI (XAI) techniques used to visualize the regions of an input image that are the most relevant for a particular task, especially image classification, in convolutional neural networks (CNNs). These methods generate heatmaps by weighting the feature maps from a convolutional layer according to their relevance to the target class. In the field of artificial intelligence, generically defined as "the effort to automate intellectual tasks normally performed by humans", machine learning and deep learning were created. They both use statistical and computational methods to learn patterns from data, reducing the need for manually coded rules. Machine learning models are trained on input data and the known respective answers, learning the underlying patterns or structures present in the data. Traditional Machine learning algorithms employ manually designed feature sets, posing a direct link between machine learning designers and employed features. Deep learning is a subfield of machine learning, based on the concept of successive layers of representation, in which the data is progressively unfolded in different ways, to extract relevant and informative patterns in data analysis. Deep learning algorithms are defined as feature learning algorithms automatically learning hierarchical feature representations from raw data, extracting increasingly abstract features through multiple layers. CNNs are a specific architecture of deep learning models, designed to process spatially structured data, such as images, exploiting a series of convolution, non-linear activation and pooling operations to extract relevant features, contained in the so-called feature maps from input data. CNNs have demonstrated to be highly effective in a variety of computer vision and image processing tasks. CNNs (and deep learning models more broadly) are described as black boxes due to their complex and non-transparent internal layers of representation. The need for clearer indications on its internal working and decision-making process gave birth to XAI techniques. Among the proposed XAI techniques for computer vision tasks, Class activation mapping methods can show which pixels in an input image are important to the predicted logit for a class of interest, in a classification task. Class activation mapping methods were originally developed for class-discriminative scenarios to visualize which parts of the input image influenced the classification decision, namely to visually highlight the regions of those feature maps that contribute most strongly to the prediction of a given class. More advanced versions of these methods are not limited to image classification tasks, but have been extended also to several vision-related tasks, such as object detection, image captioning, visual question answering and image segmentation. == Background == The following methods laid the groundwork for the class activation maps approaches, forming the conceptual basis of using gradients to highlight class-discriminative regions. === Class model visualization and saliency maps for convolutional neural networks === The class model visualization and image-specific saliency maps approaches have been presented in the foundational work "Deep Inside Convolutional Networks: Visualising Image Classification Models and Saliency Maps" by Karen Simonyan, Andrea Vedaldi, and Andrew Zisserman and it generalizes the deconvnet method by Zeiler and Fergus. Class model visualization synthesizes an artificial input image that strongly activates the output neurons associated with a target class. Given a trained, fixed model, this method starts with a zero-initialized image, backpropagates the gradients from the class score to the image pixels, updates the image pixels increasing the specific class scores and it repeats the pixel updating process, showing an encoded (idealized version) prototype of the class of interest. Image-specific class saliency visualization method provides a visual explanation by highlighting the most relevant pixels in an image for predicting a certain class C of interest. This is done by computing the gradient of the class score with respect to the input image, I 0 , {\displaystyle I_{0},} w = ∂ S C ∂ I | I 0 {\displaystyle w=\left.{\frac {\partial S_{C}}{\partial I}}\right|_{I_{0}}} approximating the model locally (around I 0 {\displaystyle I_{0}} ) as linear, using a first-order Taylor expansion: S C ( I ) ≈ w C T I + b {\displaystyle S_{C}(I)\approx w_{C}^{T}I+b} . The magnitude of w C {\displaystyle w_{C}} , the gradient, indicates the importancy of the pixels: larger gradients suggest greater influence on the prediction. Once the gradient is known, the saliency map is defined as the maximum absolute gradient across the color channels: M i j = m a x C | ∂ S C ∂ I i j C | {\displaystyle M_{ij}=max_{C}\left|{\frac {\partial S_{C}}{\partial I_{ij}^{C}}}\right|} resulting in an saliency map (i.e. heatmap). === Guided backpropagation === The concept of guided backpropagation can be traced for the first time in the paper by Springenberg et al. "Striving For Simplicity: The All Convolutional Net" and also this method builds upon the work by Zeiler and Fergus "Visualizing and Understanding Convolutional Networks". Guided backpropagation core is to understand what a CNN is learning, by visualizing the patterns that activate more strongly individual neurons (or filters), in architectures which do not rely on max-pooling layer. When propagating gradients back through a rectified linear unit (ReLU), guided backpropagation passes the gradient if and only if the input to the ReLU was positive (forward pass) and the output gradient is positive (backward signal), tackling both inactive neurons, negative gradients and suppressing the noise. The result displays sharper, high-resolution visualizations of what each neuron is responding to. Guided backpropagation represents a simple and practical method for model interpretability, helping understand how and where neural networks detect semantic concepts across layers. Moreover, it can be applied to any network architecture, due to its working principle. == Base versions == Class activation mapping and gradient-weighted class activation mapping are the original and most widely used methods for visual explanations in convolutional neural networks. These methods serve as the foundation for many later developments in explainable AI. Notation: In this article, the symbols i and j represent integer indices that disappear inside sums or averages, while x and y are the continuous (or up-sampled integer) coordinates of the final heat-map that is plotted. === Class activation mapping (CAM) === Class activation mapping (CAM) was the first, and the original, version of CAM methods, and it gave the name to the whole category. The approach was firstly introduced by Zhou et al. in their seminal work "Learning Deep Features for Discriminative Localization". This approach achieves class-specific heatmaps by modifying image classification CNN architectures, replacing fully-connected layers with convolutional layers and a final global average pooling layer. Its main scope is to localize and highlight discriminative regions of an input image that a CNN uses to identify a particular class, without needing explicit bounding box annotations. ==== Global average pooling (GAP) ==== Global average pooling (GAP) represents the key element in the original CAM approach. It is a dimensionality reduction technique and, similarly to other pooling layers, it allows the downsampling of the feature maps, calculating representative values for a specific region of the feature map. The particularity of GAP is that it calculates a single value for an entire feature map, significantly reducing the model dimensions. ==== Mathematical description ==== The mathematical description considers as its key the combination of convolutional and GAP layers. In CAM, it is mandatory to have the GAP layer after the last convolutional layer and before the final linear classifier layer. This last element of the architecture connects the output logits (the network predictions) y C {\displaystyle y^{C}} , to the GAP values, with its respective fine-tuned weights, w k C {\displaystyle w_{k}^{C}} . Considering A k {\displaystyle A^{k}} as the last feature maps of the last convolutional layer, GAP produces one value for each feature map, by averaging all the matrix elements (i, j) of the feature map: F k = 1 m n ∑ i = 1 m ∑ j = 1 n A i j k {\displaystyle F^{k}={\frac {1}{mn}}\sum _{i=1}^{m}\sum _{j=1}^{n}A_{ij}^{k}} with A k = [ A 11 k A 12 k ⋯ A 1 n k A 21 k A 22 k ⋯ A 2 n k ⋮ ⋮ ⋱ ⋮ A m 1 k A m 2 k ⋯ A m n k ] = { A i j k ∣ 1 ≤ i ≤ m , 1 ≤ j ≤ n } {\displaystyle A^{k}={\begin{bmatrix}A_{11}^{k}&A_{12}^{k}&\cdots &A_{1n}^{k}\\A_{21}^{k}&A_{22}^{k}&\cdots &A_{2n}^{k}\\\vdots &\vdots &\ddots &\vdots \\A_{m1}^{k}&A_{m2}^{k}&\cdots &A_{mn}^{k}\end{bmatrix}}=\left\{A_{

  Read more →
• 

  Human–AI interaction

  Human–AI interaction is a developing field of research and a sub-field of human–computer interaction (HCI). HCI is a field of research that explores the interactions between humans and computer-based technology, focusing on design implementation, user experience, and psychological factors. With the proliferation of artificial intelligence (AI), there has developed a sub-section of HCI research dedicated specifically to artificial intelligence and how people interact with and are impacted by it. This is human–AI interaction, abbreviated either as HAX or HAII. == Introduction == Artificial intelligence (AI), in general, has fluid definitions and varied research applications, but in brief can be applied to mechanizing tasks that would require human intelligence to complete. AI are tools designed to replicate the human abilities of navigating uncertainty, active learning, and processing information in different contexts. Within the context of HCI and HAX research, artificial intelligence can be broken into two sub-fields, natural language processing (NLP) and computer vision (CV). AI technologies notably include machine-learning, deep-learning and neural networks, and large-language models (LLMs). As a new and rapidly developing technology, AI is changing how computers work and therefore changing how humans interact with computers. Unlike the traditional human-computer interaction, where a human directs a machine, human-AI interaction is characterized by a more collaborative relationship between the computer program (the AI) and the human user, as AI is perceived as an active agent rather than a tool. This changing dynamic creates new questions and necessitates new research methods that are not present in traditional HCI research. According to a scoping review on the state of the discipline, the HAX field comprises research on the "design, development, and evaluation of AI systems" and encompasses the themes of human-AI collaboration, human-AI competition, human-AI conflict, and human-AI symbiosis. == Design == Machine learning and artificial intelligence have been used for decades in targeted advertising and to recommend content in social media. Ethical Guidelines (Framework for ethical AI development) == User Experience (UX) == This section should handle research on how users interact with tools. What techniques do they use, do they develop habits, what types of programs and devices are they using to access these tools, what do they use these tools to do exactly. === Cognitive Frameworks in AI Tool Users === AI has been viewed with various expectations, attributions, and often misconceptions. Many people exclusively understand AI as the LLM chatbots they interact with, like ChatGPT or Claude, or other generative AI programs. [Insert section: discuss how people interact with these specific AI tools as a connection to the following paragraphs] Most fundamentally, humans have a mental model of understanding AI's reasoning and motivation for its decision recommendations, and building a holistic and precise mental model of AI helps people create prompts to receive more valuable responses from AI. However, these mental models are not whole because people can only gain more information about AI through their limited interaction with it; more interaction with AI builds a better mental model that a person may build to produce better prompt outcomes. Research on human-AI interaction has emphasized that users develop mental models of AI systems and revise those models through repeated use, feedback, and explanation, while design research has stressed the importance of communicating capabilities and limitations early and supporting trust calibration through explanation and correction. In a 2025 SSRN working paper, John DeVadoss proposed "Hypothetico-Deductive Interaction" (HDI), a framework that describes human-AI interaction as a mutual process of conjecture and refutation in which users test assumptions about an AI system's capabilities while the system infers and updates assumptions about user goals through its responses and clarifying questions. DeVadoss argued that this framing helps explain prompt iteration, weak capability awareness, and trust miscalibration, and suggested design responses such as clearer communication of uncertainty, easier correction, actionable explanations, and safer failure modes. == Research themes == === Human-AI collaboration === Human-AI collaboration occurs when the human and AI supervise the task on the same level and extent to achieve the same goal. Some collaboration occurs in the form of augmenting human capability. AI may help human ability in analysis and decision-making through providing and weighing a volume of information, and learning to defer to the human decision when it recognizes its unreliability. It is especially beneficial when the human can detect a task that AI can be trusted to make few errors so that there is not a lot of excessive checking process required on the human's end. Some findings show signs of human-AI augmentation, or human–AI symbiosis, in which AI enhances human ability in a way that co-working on a task with AI produces better outcomes than a human working alone. For example: the quality and speed of customer service tasks increase when a human agent collaborates with AI, training on specific models allows AI to improve diagnoses in clinical settings, and AI with human-intervention can improve creativity of artwork while fully AI-generated haikus were rated negatively. Human-AI synergy, a concept in which human-AI collaboration would produce more optimal outcomes than either human or AI working alone could explain why AI does not always help with performance. Some AI features and development may accelerate human-AI synergy, while others may stagnate it. For example, when AI updates for better performance, it sometimes worsens the team performance with human and AI by reducing the compatibility with the new model and the mental model a user has developed on the previous version. Research has found that AI often supports human capabilities in the form of human-AI augmentation and not human-AI synergy, potentially because people rely too much on AI and stop thinking on their own. Prompting people to actively engage in analysis and think when to follow AI recommendations reduces their over-reliance, especially for individuals with higher need for cognition. === Human-AI competition === Robots and computers have substituted routine tasks historically completed by humans, but agentic AI has made it possible to also replace cognitive tasks including taking phone calls for appointments and driving a car. At the point of 2016, research has estimated that 45% of paid activities could be replaced by AI by 2030. Perceived autonomy of robots is known to increase people's negative attitude toward them, and worry about the technology taking over leads people to reject it. There has been a consistent tendency of algorithm aversion in which people prefer human advice over AI advice. However, people are not always able to tell apart tasks completed by AI or other humans. See AI takeover for more information. It is also notable that this sentiment is more prominent in the Western cultures as Westerners tend to show less positive views about AI compared to East Asians. == Research on the psychological impacts of AI == === Perception on others who use AI === As much as people perceive and make judgment about AI itself, they also form impressions of themselves and others who use AI. In the workplace, employees who disclose the use of AI in their tasks are more likely to receive feedback that they are not as hardworking as those who are in the same job who receive non-AI help to complete the same tasks. AI use disclosure diminishes the perceived legitimacy in the employee's task and decision making which ultimately leads observers to distrust people who use AI. Although these negative effects of AI use disclosure are weakened by the observers who use AI frequently themselves, the effect is still not attenuated by the observers' positive attitude towards AI. === Bias, AI, and human === Although AI provides a wide range of information and suggestions to its users, AI itself is not free of biases and stereotypes, and it does not always help people reduce their cognitive errors and biases. People are prone to such errors by failing to see other potential ideas and cases that are not listed by AI responses and committing to a decision suggested by AI that directly contradicts the correct information and directions that they are already aware of. Gender bias is also reflected as the female gendering of AI technologies which conceptualizes females as a helpful assistant. == Emotional connection with AI == Human-AI interaction has been theorized in the context of interpersonal relationships mainly in social psychology, communications and media studies, and as a technology interface through the lens of hu

  Read more →
• 

  Syman

  SYMAN is an artificial intelligence technology that uses data from social media profiles to identify trends in the job market. SYMAN is designed to organize actionable data for products and services including recruiting, human capital management, CRM, and marketing. SYMAN was developed with a $21 million series B financing round secured by Identified, which was led by VantagePoint Capital Partners and Capricorn Investment Group.

  Read more →
• 

  Non-separable wavelet

  Non-separable wavelets are multi-dimensional wavelets that are not directly implemented as tensor products of wavelets on some lower-dimensional space. They have been studied since 1992. They offer a few important advantages. Notably, using non-separable filters leads to more parameters in design, and consequently better filters. The main difference, when compared to the one-dimensional wavelets, is that multi-dimensional sampling requires the use of lattices (e.g., the quincunx lattice). The wavelet filters themselves can be separable or non-separable regardless of the sampling lattice. Thus, in some cases, the non-separable wavelets can be implemented in a separable fashion. Unlike separable wavelet, the non-separable wavelets are capable of detecting structures that are not only horizontal, vertical or diagonal (show less anisotropy). == Examples == Red-black wavelets Contourlets Shearlets Directionlets Steerable pyramids Non-separable schemes for tensor-product wavelets

  Read more →
• 

  Leakage (machine learning)

  In statistics and machine learning, leakage (also known as data leakage or target leakage) refers to the use of information during model training that would not be available at prediction time. This results in overly optimistic performance estimates, as the model appears to perform better during evaluation than it actually would in a production environment. Leakage is often subtle and indirect, making it difficult to detect and eliminate. It can lead a statistician or modeler to select a suboptimal model, which may be outperformed by a leakage-free alternative. == Leakage modes == Leakage can occur at multiple stages of the machine learning workflow. Broadly, its sources can be divided into two categories: those arising from features and those arising from training examples. === Feature leakage === Feature or column-wise leakage is caused by the inclusion of columns which are one of the following: a duplicate label, a proxy for the label, or the label itself. These features, known as anachronisms, will not be available when the model is used for predictions, and result in leakage if included when the model is trained. For example, including a "MonthlySalary" column when predicting "YearlySalary"; or "MinutesLate" when predicting "IsLate". === Training example leakage === Row-wise leakage is caused by improper sharing of information between rows of data. Types of row-wise leakage include: Premature featurization; leaking from premature featurization before Cross-validation/Train/Test split (must fit MinMax/ngrams/etc on only the train split, then transform the test set) Duplicate rows between train/validation/test (for example, oversampling a dataset to pad its size before splitting; or, different rotations/augmentations of a single image; bootstrap sampling before splitting; or duplicating rows to up sample the minority class) Non-independent and identically distributed random (non-IID) data Time leakage (for example, splitting a time-series dataset randomly instead of newer data in test set using a train/test split or rolling-origin cross-validation) Group leakage—not including a grouping split column (for example, Andrew Ng's group had 100k x-rays of 30k patients, meaning ~3 images per patient. The paper used random splitting instead of ensuring that all images of a patient were in the same split. Hence the model partially memorized the patients instead of learning to recognize pneumonia in chest x-rays.) A 2023 review found data leakage to be "a widespread failure mode in machine-learning (ML)-based science", having affected at least 294 academic publications across 17 disciplines, and causing a potential reproducibility crisis. == Detection == Data leakage in machine learning can be detected through various methods, focusing on performance analysis, feature examination, data auditing, and model behavior analysis. Performance-wise, unusually high accuracy or significant discrepancies between training and test results often indicate leakage. Inconsistent cross-validation outcomes may also signal issues. Feature examination involves scrutinizing feature importance rankings and ensuring temporal integrity in time series data. A thorough audit of the data pipeline is crucial, reviewing pre-processing steps, feature engineering, and data splitting processes. Detecting duplicate entries across dataset splits is also important. For language models, the Min-K% method can detect the presence of data in a pretraining dataset. It presents a sentence suspected to be present in the pretraining dataset, and computes the log-likelihood of each token, then compute the average of the lowest K of these. If this exceeds a threshold, then the sentence is likely present. This method is improved by comparing against a baseline of the mean and variance. Analyzing model behavior can reveal leakage. Models relying heavily on counter-intuitive features or showing unexpected prediction patterns warrant investigation. Performance degradation over time when tested on new data may suggest earlier inflated metrics due to leakage. Advanced techniques include backward feature elimination, where suspicious features are temporarily removed to observe performance changes. Using a separate hold-out dataset for final validation before deployment is advisable.

  Read more →
• 

  Empirical dynamic modeling

  Empirical dynamic modeling (EDM) is a framework for analysis and prediction of nonlinear dynamical systems. Applications include population dynamics, ecosystem service, medicine, neuroscience, dynamical systems, geophysics, and human-computer interaction. EDM was originally developed by Robert May and George Sugihara. It can be considered a methodology for data modeling, predictive analytics, dynamical system analysis, machine learning and time series analysis. == Description == Mathematical models have tremendous power to describe observations of real-world systems. They are routinely used to test hypothesis, explain mechanisms and predict future outcomes. However, real-world systems are often nonlinear and multidimensional, in some instances rendering explicit equation-based modeling problematic. Empirical models, which infer patterns and associations from the data instead of using hypothesized equations, represent a natural and flexible framework for modeling complex dynamics. Donald DeAngelis and Simeon Yurek illustrated that canonical statistical models are ill-posed when applied to nonlinear dynamical systems. A hallmark of nonlinear dynamics is state-dependence: system states are related to previous states governing transition from one state to another. EDM operates in this space, the multidimensional state-space of system dynamics rather than on one-dimensional observational time series. EDM does not presume relationships among states, for example, a functional dependence, but projects future states from localised, neighboring states. EDM is thus a state-space, nearest-neighbors paradigm where system dynamics are inferred from states derived from observational time series. This provides a model-free representation of the system naturally encompassing nonlinear dynamics. A cornerstone of EDM is recognition that time series observed from a dynamical system can be transformed into higher-dimensional state-spaces by time-delay embedding with Takens's theorem. The state-space models are evaluated based on in-sample fidelity to observations, conventionally with Pearson correlation between predictions and observations. == Methods == Primary EDM algorithms include Simplex projection, Sequential locally weighted global linear maps (S-Map) projection, Multivariate embedding in Simplex or S-Map, Convergent cross mapping (CCM), and Multiview Embeding, described below. Nearest neighbors are found according to: NN ( y , X , k ) = ‖ X N i E − y ‖ ≤ ‖ X N j E − y ‖ if 1 ≤ i ≤ j ≤ k {\displaystyle {\text{NN}}(y,X,k)=\|X_{N_{i}}^{E}-y\|\leq \|X_{N_{j}}^{E}-y\|{\text{ if }}1\leq i\leq j\leq k} === Simplex === Simplex projection is a nearest neighbor projection. It locates the k {\displaystyle k} nearest neighbors to the location in the state-space from which a prediction is desired. To minimize the number of free parameters k {\displaystyle k} is typically set to E + 1 {\displaystyle E+1} defining an E + 1 {\displaystyle E+1} dimensional simplex in the state-space. The prediction is computed as the average of the weighted phase-space simplex projected T p {\displaystyle Tp} points ahead. Each neighbor is weighted proportional to their distance to the projection origin vector in the state-space. Find k {\displaystyle k} nearest neighbor: N k ← NN ( y , X , k ) {\displaystyle N_{k}\gets {\text{NN}}(y,X,k)} Define the distance scale: d ← ‖ X N 1 E − y ‖ {\displaystyle d\gets \|X_{N_{1}}^{E}-y\|} Compute weights: For{ i = 1 , … , k {\displaystyle i=1,\dots ,k} } : w i ← exp ⁡ ( − ‖ X N i E − y ‖ / d ) {\displaystyle w_{i}\gets \exp(-\|X_{N_{i}}^{E}-y\|/d)} Average of state-space simplex: y ^ ← ∑ i = 1 k ( w i X N i + T p ) / ∑ i = 1 k w i {\displaystyle {\hat {y}}\gets \sum _{i=1}^{k}\left(w_{i}X_{N_{i}+T_{p}}\right)/\sum _{i=1}^{k}w_{i}} === S-Map === S-Map extends the state-space prediction in Simplex from an average of the E + 1 {\displaystyle E+1} nearest neighbors to a linear regression fit to all neighbors, but localised with an exponential decay kernel. The exponential localisation function is F ( θ ) = exp ( − θ d / D ) {\displaystyle F(\theta )={\text{exp}}(-\theta d/D)} , where d {\displaystyle d} is the neighbor distance and D {\displaystyle D} the mean distance. In this way, depending on the value of θ {\displaystyle \theta } , neighbors close to the prediction origin point have a higher weight than those further from it, such that a local linear approximation to the nonlinear system is reasonable. This localisation ability allows one to identify an optimal local scale, in-effect quantifying the degree of state dependence, and hence nonlinearity of the system. Another feature of S-Map is that for a properly fit model, the regression coefficients between variables have been shown to approximate the gradient (directional derivative) of variables along the manifold. These Jacobians represent the time-varying interaction strengths between system variables. Find k {\displaystyle k} nearest neighbor: N ← NN ( y , X , k ) {\displaystyle N\gets {\text{NN}}(y,X,k)} Sum of distances: D ← 1 k ∑ i = 1 k ‖ X N i E − y ‖ {\displaystyle D\gets {\frac {1}{k}}\sum _{i=1}^{k}\|X_{N_{i}}^{E}-y\|} Compute weights: For{ i = 1 , … , k {\displaystyle i=1,\dots ,k} } : w i ← exp ⁡ ( − θ ‖ X N i E − y ‖ / D ) {\displaystyle w_{i}\gets \exp(-\theta \|X_{N_{i}}^{E}-y\|/D)} Reweighting matrix: W ← diag ( w i ) {\displaystyle W\gets {\text{diag}}(w_{i})} Design matrix: A ← [ 1 X N 1 X N 1 − 1 … X N 1 − E + 1 1 X N 2 X N 2 − 1 … X N 2 − E + 1 ⋮ ⋮ ⋮ ⋱ ⋮ 1 X N k X N k − 1 … X N k − E + 1 ] {\displaystyle A\gets {\begin{bmatrix}1&X_{N_{1}}&X_{N_{1}-1}&\dots &X_{N_{1}-E+1}\\1&X_{N_{2}}&X_{N_{2}-1}&\dots &X_{N_{2}-E+1}\\\vdots &\vdots &\vdots &\ddots &\vdots \\1&X_{N_{k}}&X_{N_{k}-1}&\dots &X_{N_{k}-E+1}\end{bmatrix}}} Weighted design matrix: A ← W A {\displaystyle A\gets WA} Response vector at T p {\displaystyle Tp} : b ← [ X N 1 + T p X N 2 + T p ⋮ X N k + T p ] {\displaystyle b\gets {\begin{bmatrix}X_{N_{1}+T_{p}}\\X_{N_{2}+T_{p}}\\\vdots \\X_{N_{k}+T_{p}}\end{bmatrix}}} Weighted response vector: b ← W b {\displaystyle b\gets Wb} Least squares solution (SVD): c ^ ← argmin c ‖ A c − b ‖ 2 2 {\displaystyle {\hat {c}}\gets {\text{argmin}}_{c}\|Ac-b\|_{2}^{2}} Local linear model c ^ {\displaystyle {\hat {c}}} is prediction: y ^ ← c ^ 0 + ∑ i = 1 E c ^ i y i {\displaystyle {\hat {y}}\gets {\hat {c}}_{0}+\sum _{i=1}^{E}{\hat {c}}_{i}y_{i}} === Multivariate Embedding === Multivariate Embedding recognizes that time-delay embeddings are not the only valid state-space construction. In Simplex and S-Map one can generate a state-space from observational vectors, or time-delay embeddings of a single observational time series, or both. === Convergent Cross Mapping === Convergent cross mapping (CCM) leverages a corollary to the Generalized Takens Theorem that it should be possible to cross predict or cross map between variables observed from the same system. Suppose that in some dynamical system involving variables X {\displaystyle X} and Y {\displaystyle Y} , X {\displaystyle X} causes Y {\displaystyle Y} . Since X {\displaystyle X} and Y {\displaystyle Y} belong to the same dynamical system, their reconstructions (via embeddings) M x {\displaystyle M_{x}} , and M y {\displaystyle M_{y}} , also map to the same system. The causal variable X {\displaystyle X} leaves a signature on the affected variable Y {\displaystyle Y} , and consequently, the reconstructed states based on Y {\displaystyle Y} can be used to cross predict values of X {\displaystyle X} . CCM leverages this property to infer causality by predicting X {\displaystyle X} using the M y {\displaystyle M_{y}} library of points (or vice versa for the other direction of causality), while assessing improvements in cross map predictability as larger and larger random samplings of M y {\displaystyle M_{y}} are used. If the prediction skill of X {\displaystyle X} increases and saturates as the entire M y {\displaystyle M_{y}} is used, this provides evidence that X {\displaystyle X} is casually influencing Y {\displaystyle Y} . === Multiview Embedding === Multiview Embedding is a Dimensionality reduction technique where a large number of state-space time series vectors are combitorially assessed towards maximal model predictability. == Extensions == Extensions to EDM techniques include: Generalized Theorems for Nonlinear State Space Reconstruction Extended Convergent Cross Mapping Dynamic stability S-Map regularization Visual analytics with EDM Convergent Cross Sorting Expert system with EDM hybrid Sliding windows based on the extended convergent cross-mapping Empirical Mode Modeling Accounting for missing data and variable step sizes Accounting for observation noise Hierarchical Bayesian EDM via Gaussian processes Intelligent and Adaptive Control Optimal control via Empirical dynamic programming Multiview distance regularised S-map

  Read more →
• 

  Maximum inner-product search

  Maximum inner-product search (MIPS) is a search problem, with a corresponding class of search algorithms which attempt to maximise the inner product between a query and the data items to be retrieved. MIPS algorithms are used in a wide variety of big data applications, including recommendation algorithms and machine learning. Formally, for a database of vectors x i {\displaystyle x_{i}} defined over a set of labels S {\displaystyle S} in an inner product space with an inner product ⟨ ⋅ , ⋅ ⟩ {\displaystyle \langle \cdot ,\cdot \rangle } defined on it, MIPS search can be defined as the problem of determining a r g m a x i ∈ S ⟨ x i , q ⟩ {\displaystyle {\underset {i\in S}{\operatorname {arg\,max} }}\ \langle x_{i},q\rangle } for a given query q {\displaystyle q} . Although there is an obvious linear-time implementation, it is generally too slow to be used on practical problems. However, efficient algorithms exist to speed up MIPS search. Under the assumption of all vectors in the set having constant norm, MIPS can be viewed as equivalent to a nearest neighbor search (NNS) problem in which maximizing the inner product is equivalent to minimizing the corresponding distance metric in the NNS problem. Like other forms of NNS, MIPS algorithms may be approximate or exact. MIPS search is used as part of DeepMind's RETRO algorithm.

  Read more →
• 

  Rapid prototyping

  Rapid prototyping is a group of techniques used to quickly fabricate a scale model of a physical part or assembly using three-dimensional computer aided design (CAD) data. Construction of the part or assembly is usually done using 3D printing or "additive layer manufacturing" technology. The first methods for rapid prototyping became available in mid 1987 and were used to produce models and prototype parts. Today, they are used for a wide range of applications and are used to manufacture production-quality parts in relatively small numbers if desired without the typical unfavorable short-run economics. This economy has encouraged online service bureaus. Historical surveys of RP technology start with discussions of simulacra production techniques used by 19th-century sculptors. Some modern sculptors use the progeny technology to produce exhibitions and various objects. The ability to reproduce designs from a dataset has given rise to issues of rights, as it is now possible to interpolate volumetric data from 2D images. As with CNC subtractive methods, the computer-aided-design – computer-aided manufacturing CAD -CAM workflow in the traditional rapid prototyping process starts with the creation of geometric data, either as a 3D solid using a CAD workstation, or 2D slices using a scanning device. For rapid prototyping this data must represent a valid geometric model; namely, one whose boundary surfaces enclose a finite volume, contain no holes exposing the interior, and do not fold back on themselves. In other words, the object must have an "inside". The model is valid if for each point in 3D space the computer can determine uniquely whether that point lies inside, on, or outside the boundary surface of the model. CAD post-processors will approximate the application vendors' internal CAD geometric forms (e.g., B-splines) with a simplified mathematical form, which in turn is expressed in a specified data format which is a common feature in additive manufacturing: STL file format, a de facto standard for transferring solid geometric models to SFF machines. To obtain the necessary motion control trajectories to drive the actual SFF, rapid prototyping, 3D printing or additive manufacturing mechanism, the prepared geometric model is typically sliced into layers, and the slices are scanned into lines (producing a "2D drawing" used to generate trajectory as in CNC's toolpath), mimicking in reverse the layer-to-layer physical building process. == Application areas == Rapid prototyping is also commonly applied in software engineering to try out new business models and application architectures such as Aerospace, Automotive, Financial Services, Product development, and Healthcare. Aerospace design and industrial teams rely on prototyping in order to create new AM methodologies in the industry. Using SLA they can quickly make multiple versions of their projects in a few days and begin testing quicker. Rapid Prototyping allows designers/developers to provide an accurate idea of how the finished product will turn out before putting too much time and money into the prototype. 3D printing being used for Rapid Prototyping allows for Industrial 3D printing to take place. With this, you could have large-scale moulds to spare parts being pumped out quickly within a short period of time. == Types of Rapid Prototyping == Stereolithography (SLA) → a laser-cured photopolymer for materials such as thermoplastic-like photopolymers. Selective Laser Sintering (SLS) → a laser-sintered powder for materials such as Nylon or TPU. Direct Metal Laser Sintering (DMLS) → laser-sintered metal powder for materials like stainless steel, titanium, chrome, and aluminum. Fused Deposition Modeling (FDM) → fused extrusions of filaments like ABS, PC, and PPCU. Multi Jet Fusion (MJF) → it is an inkjet array selective fusing across bed of nylon powder for Black Nylon 12. PolyJet (PJET) → it is a uv-cured jetted photopolymer to work with acrylic-based and elastomeric photopolymers. Computer Numerical Controlled Machine (CNC) → it is used for manipulating engineering-grade thermoplastics and metals. Injection Molding (IM) → the injection is done using aluminum molds and it is used for thermoplastics, metals and liquid silicone rubber. Vacuum Casting→ is a manufacturing process used to create high-quality prototypes and small batches of parts. == History == In the 1970s, Joseph Henry Condon and others at Bell Labs developed the Unix Circuit Design System (UCDS), automating the laborious and error-prone task of manually converting drawings to fabricate circuit boards for the purposes of research and development. By the 1980s, U.S. policy makers and industrial managers were forced to take note that America's dominance in the field of machine tool manufacturing evaporated, in what was named the machine tool crisis. Numerous projects sought to counter these trends in the traditional CNC CAM area, which had begun in the US. Later when Rapid Prototyping Systems moved out of labs to be commercialized, it was recognized that developments were already international and U.S. rapid prototyping companies would not have the luxury of letting a lead slip away. The National Science Foundation was an umbrella for the National Aeronautics and Space Administration (NASA), the US Department of Energy, the US Department of Commerce NIST, the US Department of Defense, Defense Advanced Research Projects Agency (DARPA), and the Office of Naval Research coordinated studies to inform strategic planners in their deliberations. One such report was the 1997 Rapid Prototyping in Europe and Japan Panel Report in which Joseph J. Beaman founder of DTM Corporation [DTM RapidTool pictured] provides a historical perspective: The roots of rapid prototyping technology can be traced to practices in topography and photosculpture. Within TOPOGRAPHY Blanther (1892) suggested a layered method for making a mold for raised relief paper topographical maps .The process involved cutting the contour lines on a series of plates which were then stacked. Matsubara (1974) of Mitsubishi proposed a topographical process with a photo-hardening photopolymer resin to form thin layers stacked to make a casting mold. PHOTOSCULPTURE was a 19th-century technique to create exact three-dimensional replicas of objects. Most famously Francois Willeme (1860) placed 24 cameras in a circular array and simultaneously photographed an object. The silhouette of each photograph was then used to carve a replica. Morioka (1935, 1944) developed a hybrid photo sculpture and topographic process using structured light to photographically create contour lines of an object. The lines could then be developed into sheets and cut and stacked, or projected onto stock material for carving. The Munz (1956) Process reproduced a three-dimensional image of an object by selectively exposing, layer by layer, a photo emulsion on a lowering piston. After fixing, a solid transparent cylinder contains an image of the object. "The Origins of Rapid Prototyping - RP stems from the ever-growing CAD industry, more specifically, the solid modeling side of CAD. Before solid modeling was introduced in the late 1980's, three-dimensional models were created with wire frames and surfaces. But not until the development of true solid modeling could innovative processes such as RP be developed. Charles Hull, who helped found 3D Systems in 1986, developed the first RP process. This process, called stereolithography, builds objects by curing thin consecutive layers of certain ultraviolet light-sensitive liquid resins with a low-power laser. With the introduction of RP, CAD solid models could suddenly come to life". The technologies referred to as Solid Freeform Fabrication are what we recognize today as rapid prototyping, 3D printing or additive manufacturing: Swainson (1977), Schwerzel (1984) worked on polymerization of a photosensitive polymer at the intersection of two computer controlled laser beams. Ciraud (1972) considered magnetostatic or electrostatic deposition with electron beam, laser or plasma for sintered surface cladding. These were all proposed but it is unknown if working machines were built. Hideo Kodama of Nagoya Municipal Industrial Research Institute was the first to publish an account of a solid model fabricated using a photopolymer rapid prototyping system (1981). The first 3D rapid prototyping system relying on Fused Deposition Modeling (FDM) was made in April 1992 by Stratasys but the patent did not issue until June 9, 1992. Sanders Prototype, Inc introduced the first desktop inkjet 3D Printer (3DP) using an invention from August 4, 1992 (Helinski), Modelmaker 6Pro in late 1993 and then the larger industrial 3D printer, Modelmaker 2, in 1997. Z-Corp using the MIT 3DP powder binding for Direct Shell Casting (DSP) invented 1993 was introduced to the market in 1995. Even at that early date the technology was seen as having a place in manufacturing practice. A low resol

  Read more →
• 

  Gödel machine

  A Gödel machine is a hypothetical self-improving computer program that solves problems in an optimal way. It uses a recursive self-improvement protocol in which it rewrites its own code when it can prove the new code provides a better strategy. The machine was invented by Jürgen Schmidhuber (first proposed in 2003), but is named after Kurt Gödel who inspired the mathematical theories. The Gödel machine is often discussed when dealing with issues of meta-learning, also known as "learning to learn." Applications include automating human design decisions and transfer of knowledge between multiple related tasks, and may lead to design of more robust and general learning architectures. Though theoretically possible, no full implementation has been created. The Gödel machine is often compared with Marcus Hutter's AIXI, another formal specification for an artificial general intelligence. Schmidhuber points out that the Gödel machine could start out by implementing AIXItl as its initial sub-program, and self-modify after it finds proof that another algorithm for its search code will be better. == Limitations == Traditional problems solved by a computer only require one input and provide some output. Computers of this sort had their initial algorithm hardwired. This does not take into account the dynamic natural environment, and thus was a goal for the Gödel machine to overcome. The Gödel machine has limitations of its own, however. According to Gödel's First Incompleteness Theorem, any formal system that encompasses arithmetic is either flawed or allows for statements that cannot be proved in the system. Hence even a Gödel machine with unlimited computational resources must ignore those self-improvements whose effectiveness it cannot prove. == Variables of interest == There are three variables that are particularly useful in the run time of the Gödel machine. At some time t {\displaystyle t} , the variable time {\displaystyle {\text{time}}} will have the binary equivalent of t {\displaystyle t} . This is incremented steadily throughout the run time of the machine. Any input meant for the Gödel machine from the natural environment is stored in variable x {\displaystyle x} . It is likely the case that x {\displaystyle x} will hold different values for different values of variable time {\displaystyle {\text{time}}} . The outputs of the Gödel machine are stored in variable y {\displaystyle y} , where y ( t ) {\displaystyle y(t)} would be the output bit-string at some time t {\displaystyle t} . At any given time t {\displaystyle t} , where ( 1 ≤ t ≤ T ) {\displaystyle (1\leq t\leq T)} , the goal is to maximize future success or utility. A typical utility function follows the pattern u ( s , E n v ) : S × E → R {\displaystyle u(s,\mathrm {Env} ):S\times E\rightarrow \mathbb {R} } : u ( s , E n v ) = E μ [ ∑ τ = time T r ( τ ) ∣ s , E n v ] {\displaystyle u(s,\mathrm {Env} )=E_{\mu }{\Bigg [}\sum _{\tau ={\text{time}}}^{T}r(\tau )\mid s,\mathrm {Env} {\Bigg ]}} where r ( t ) {\displaystyle r(t)} is a real-valued reward input (encoded within s ( t ) {\displaystyle s(t)} ) at time t {\displaystyle t} , E μ [ ⋅ ∣ ⋅ ] {\displaystyle E_{\mu }[\cdot \mid \cdot ]} denotes the conditional expectation operator with respect to some possibly unknown distribution μ {\displaystyle \mu } from a set M {\displaystyle M} of possible distributions ( M {\displaystyle M} reflects whatever is known about the possibly probabilistic reactions of the environment), and the above-mentioned time = time ⁡ ( s ) {\displaystyle {\text{time}}=\operatorname {time} (s)} is a function of state s {\displaystyle s} which uniquely identifies the current cycle. Note that we take into account the possibility of extending the expected lifespan through appropriate actions. == Instructions used by proof techniques == The nature of the six proof-modifying instructions below makes it impossible to insert an incorrect theorem into proof, thus trivializing proof verification. === get-axiom(n) === Appends the n-th axiom as a theorem to the current theorem sequence. Below is the initial axiom scheme: Hardware Axioms formally specify how components of the machine could change from one cycle to the next. Reward Axioms define the computational cost of hardware instruction and the physical cost of output actions. Related Axioms also define the lifetime of the Gödel machine as scalar quantities representing all rewards/costs. Environment Axioms restrict the way new inputs x are produced from the environment, based on previous sequences of inputs y. Uncertainty Axioms/String Manipulation Axioms are standard axioms for arithmetic, calculus, probability theory, and string manipulation that allow for the construction of proofs related to future variable values within the Gödel machine. Initial State Axioms contain information about how to reconstruct parts or all of the initial state. Utility Axioms describe the overall goal in the form of utility function u. === apply-rule(k, m, n) === Takes in the index k of an inference rule (such as Modus tollens, Modus ponens), and attempts to apply it to the two previously proved theorems m and n. The resulting theorem is then added to the proof. === delete-theorem(m) === Deletes the theorem stored at index m in the current proof. This helps to mitigate storage constraints caused by redundant and unnecessary theorems. Deleted theorems can no longer be referenced by the above apply-rule function. === set-switchprog(m, n) === Replaces switchprog S pm:n, provided it is a non-empty substring of S p. === check() === Verifies whether the goal of the proof search has been reached. A target theorem states that given the current axiomatized utility function u (Item 1f), the utility of a switch from p to the current switchprog would be higher than the utility of continuing the execution of p (which would keep searching for alternative switchprogs). === state2theorem(m, n) === Takes in two arguments, m and n, and attempts to convert the contents of Sm:n into a theorem. == Example applications == === Time-limited NP-hard optimization === The initial input to the Gödel machine is the representation of a connected graph with a large number of nodes linked by edges of various lengths. Within given time T it should find a cyclic path connecting all nodes. The only real-valued reward will occur at time T. It equals 1 divided by the length of the best path found so far (0 if none was found). There are no other inputs. The by-product of maximizing expected reward is to find the shortest path findable within the limited time, given the initial bias. === Fast theorem proving === Prove or disprove as quickly as possible that all even integers > 2 are the sum of two primes (Goldbach’s conjecture). The reward is 1/t, where t is the time required to produce and verify the first such proof. === Maximizing expected reward with bounded resources === A cognitive robot that needs at least 1 liter of gasoline per hour interacts with a partially unknown environment, trying to find hidden, limited gasoline depots to occasionally refuel its tank. It is rewarded in proportion to its lifetime, and dies after at most 100 years or as soon as its tank is empty or it falls off a cliff, and so on. The probabilistic environmental reactions are initially unknown but assumed to be sampled from the axiomatized Speed Prior, according to which hard-to-compute environmental reactions are unlikely. This permits a computable strategy for making near-optimal predictions. One by-product of maximizing expected reward is to maximize expected lifetime.

  Read more →
• 

  Smart speaker industry in South Korea

  Smart speakers, or AI speakers, have been developed by multiple domestic electronics and telecommunications firms in South Korea. Since their introduction to the local market in 2016, they have been used by millions of people in the country. == Brands == === Google === In September 2018, Google Home (including the Google Home Mini) launched in South Korea. Running Google Assistant, it featured simultaneous recognition of two languages among a total of seven, including Korean. At launch, it could play music from Bugs!, in addition to YouTube. === Kakao === In November 2017, Kakao launched the Kakao Mini, featuring integrated KakaoTalk functionality. === KT === KT launched the GiGA Genie smart speaker in January 2017, using a Harman Kardon speaker. In November 2017, KT announced GiGA Genie LTE, a portable AI speaker with LTE support. They also released a mini speaker called GiGA Genie Buddy. In 2018, KT created a special version of GiGa Genie with a screen for use in hotels. On 29 April 2019, KT announced the GiGA Genie Table TV, a consumer-oriented smart speaker with a display. It featured paid TV access through Wi-Fi. Based on usage data from the hotel model, KT decided not to add a touchscreen. The Table TV also featured a limited-access "personalized-text-to-speech technology" which could use parents' voice recording inputs to read children books. In February 2022, KT began rolling out Amazon Alexa integration into its speakers for English support. === Naver === In August 2017, Naver announced the Wave smart speaker, operating on Clova. In October 2017, Naver launched the Friends smart speaker, which were designed based on Line characters. ==== LG Uplus ==== In December 2017, LG Uplus launched the Friends+ speaker with Naver, operating on U+ Home AI. === Samsung === In August 2018, Samsung announced the Samsung Galaxy Home in partnership with Spotify. The original size was delayed, while the Galaxy Home Mini appeared briefly as a bonus for Samsung Galaxy S20 preorders in South Korea in February 2020. === SK Telecom === SK Telecom launched the Nugu smart speaker in September 2016, using an Astell & Kern audio system. In August 2017, SKT released a portable speaker named Nugu mini. In July 2018, SKT launched the Nugu Candle, featuring expanded mood lighting. The first-generation Nugu was subsequently discontinued. On 18 April 2019, SKT released the NUGU Nemo AI, which featured a display and JBL stereo speaker. In August 2019, SKT collaborated with SM Entertainment, incorporating functions related to the agency's artists into Nugu. In January 2022, SKT showcased the NUGU Candle SE, introducing Alexa support. == Usage == In 2018, approximately 3 million people in South Korea used smart speakers. According to data from KT in 2018, the most common commands to its speakers were for controlling televisions. Based on a broader survey in 2017, music was selected as the most frequent use case. By 2018, smart speaker companies were partnering with reading and other education services, adding potential use-cases for children. By 2022, smart speakers were being utilized by the South Korean government. SKT, in partnership with 70 regional governments, distributed smart speakers to 12,000 senior citizens living alone. The government paid for monthly subscriptions to help seniors stay mentally engaged. Naver made an agreement with the Seoul Metropolitan Government to provide Clova CareCall, an automated health checkup program to hundreds of senior citizens living alone. KT's AI care service included an emergency dispatch call function and medication notifications. == Criticism == === Communication === In a survey of 300 users in 2017, approximately half reported having some type of communication issue with their smart speakers. === Privacy === South Korean smart speakers sparked privacy concerns when they were found to be collecting and documenting user audio data in 2019. The speaker companies responded that only a minority of data was collected and that it was anonymized. They stated that such recordings were collected for performance improvements.

  Read more →