AI Chatbot Free Unlimited

AI Chatbot Free Unlimited — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

  • Neural scaling law

    Neural scaling law

    In machine learning, a neural scaling law is an empirical scaling law that describes how neural network performance changes as key factors are scaled up or down. These factors typically include the number of parameters, training dataset size, and training cost. Some models also exhibit performance gains by scaling inference through increased test-time compute (TTC), extending neural scaling laws beyond training to the deployment phase. == Introduction == In general, a deep learning model can be characterized by four parameters: model size, training dataset size, training cost, and the post-training error rate (e.g., the test set error rate). Each of these variables can be defined as a real number, usually written as N , D , C , L {\displaystyle N,D,C,L} (respectively: parameter count, dataset size, computing cost, and loss). A neural scaling law is a theoretical or empirical statistical law between these parameters. There are also other parameters with other scaling laws. === Size of the model === In most cases, the model's size is simply the number of parameters. However, one complication arises with the use of sparse models, such as mixture-of-expert models. With sparse models, during inference, only a fraction of their parameters are used. In comparison, most other kinds of neural networks, such as transformer models, always use all their parameters during inference. === Size of the training dataset === The size of the training dataset is usually quantified by the number of data points within it. Larger training datasets are typically preferred, as they provide a richer and more diverse source of information from which the model can learn. This can lead to improved generalization performance when the model is applied to new, unseen data. However, increasing the size of the training dataset also increases the computational resources and time required for model training. With the "pretrain, then finetune" method used for most large language models, there are two kinds of training dataset: the pretraining dataset and the finetuning dataset. Their sizes have different effects on model performance. Generally, the finetuning dataset is less than 1% the size of pretraining dataset. In some cases, a small amount of high quality data suffices for finetuning, and more data does not necessarily improve performance. Many scaling laws, due to their inherent diminishing returns nature, value data based on a submodular set function which was shown in a paper on this topic. === Cost of training === Training cost is typically measured in terms of time (how long it takes to train the model) and computational resources (how much processing power and memory are required). It is important to note that the cost of training can be significantly reduced with efficient training algorithms, optimized software libraries, and parallel computing on specialized hardware such as GPUs or TPUs. The cost of training a neural network model is a function of several factors, including model size, training dataset size, the training algorithm complexity, and the computational resources available. In particular, doubling the training dataset size does not necessarily double the cost of training, because one may train the model for several times over the same dataset (each being an "epoch"). === Performance === The performance of a neural network model is evaluated based on its ability to accurately predict the output given some input data. Common metrics for evaluating model performance include: Negative log-likelihood per token (logarithm of perplexity) for language modeling; Accuracy, precision, recall, and F1 score for classification tasks; Mean squared error (MSE) or mean absolute error (MAE) for regression tasks; Elo rating in a competition against other models, such as gameplay or preference by a human judge. Performance can be improved by using more data, larger models, different training algorithms, regularizing the model to prevent overfitting, and early stopping using a validation set. When the performance is a number bounded within the range of [ 0 , 1 ] {\displaystyle [0,1]} , such as accuracy, precision, etc., it often scales as a sigmoid function of cost, as seen in the figures. == Examples == === (Hestness, Narang, et al, 2017) === The 2017 paper is a common reference point for neural scaling laws fitted by statistical analysis on experimental data. Previous works before the 2000s, as cited in the paper, were either theoretical or orders of magnitude smaller in scale. Whereas previous works generally found the scaling exponent to scale like L ∝ D − α {\displaystyle L\propto D^{-\alpha }} , with α ∈ { 0.5 , 1 , 2 } {\displaystyle \alpha \in \{0.5,1,2\}} , the paper found that α ∈ [ 0.07 , 0.35 ] {\displaystyle \alpha \in [0.07,0.35]} . Of the factors they varied, only task can change the exponent α {\displaystyle \alpha } . Changing the architecture optimizers, regularizers, and loss functions, would only change the proportionality factor, not the exponent. For example, for the same task, one architecture might have L = 1000 D − 0.3 {\displaystyle L=1000D^{-0.3}} while another might have L = 500 D − 0.3 {\displaystyle L=500D^{-0.3}} . They also found that for a given architecture, the number of parameters necessary to reach lowest levels of loss, given a fixed dataset size, grows like N ∝ D β {\displaystyle N\propto D^{\beta }} for another exponent β {\displaystyle \beta } . They studied machine translation with LSTM ( α ∼ 0.13 {\displaystyle \alpha \sim 0.13} ), generative language modelling with LSTM ( α ∈ [ 0.06 , 0.09 ] , β ≈ 0.7 {\displaystyle \alpha \in [0.06,0.09],\beta \approx 0.7} ), ImageNet classification with ResNet ( α ∈ [ 0.3 , 0.5 ] , β ≈ 0.6 {\displaystyle \alpha \in [0.3,0.5],\beta \approx 0.6} ), and speech recognition with two hybrid (LSTMs complemented by either CNNs or an attention decoder) architectures ( α ≈ 0.3 {\displaystyle \alpha \approx 0.3} ). === (Henighan, Kaplan, et al, 2020) === A 2020 analysis studied statistical relations between C , N , D , L {\displaystyle C,N,D,L} over a wide range of values and found similar scaling laws, over the range of N ∈ [ 10 3 , 10 9 ] {\displaystyle N\in [10^{3},10^{9}]} , C ∈ [ 10 12 , 10 21 ] {\displaystyle C\in [10^{12},10^{21}]} , and over multiple modalities (text, video, image, text to image, etc.). In particular, the scaling laws it found are (Table 1 of ): For each modality, they fixed one of the two C , N {\displaystyle C,N} , and varying the other one ( D {\displaystyle D} is varied along using D = C / 6 N {\displaystyle D=C/6N} ), the achievable test loss satisfies L = L 0 + ( x 0 x ) α {\displaystyle L=L_{0}+\left({\frac {x_{0}}{x}}\right)^{\alpha }} where x {\displaystyle x} is the varied variable, and L 0 , x 0 , α {\displaystyle L_{0},x_{0},\alpha } are parameters to be found by statistical fitting. The parameter α {\displaystyle \alpha } is the most important one. When N {\displaystyle N} is the varied variable, α {\displaystyle \alpha } ranges from 0.037 {\displaystyle 0.037} to 0.24 {\displaystyle 0.24} depending on the model modality. This corresponds to the α = 0.34 {\displaystyle \alpha =0.34} from the Chinchilla scaling paper. When C {\displaystyle C} is the varied variable, α {\displaystyle \alpha } ranges from 0.048 {\displaystyle 0.048} to 0.19 {\displaystyle 0.19} depending on the model modality. This corresponds to the β = 0.28 {\displaystyle \beta =0.28} from the Chinchilla scaling paper. Given fixed computing budget, optimal model parameter count is consistently around N o p t ( C ) = ( C 5 × 10 − 12 petaFLOP-day ) 0.7 = 9.0 × 10 − 7 C 0.7 {\displaystyle N_{opt}(C)=\left({\frac {C}{5\times 10^{-12}{\text{petaFLOP-day}}}}\right)^{0.7}=9.0\times 10^{-7}C^{0.7}} The parameter 9.0 × 10 − 7 {\displaystyle 9.0\times 10^{-7}} varies by a factor of up to 10 for different modalities. The exponent parameter 0.7 {\displaystyle 0.7} varies from 0.64 {\displaystyle 0.64} to 0.75 {\displaystyle 0.75} for different modalities. This exponent corresponds to the ≈ 0.5 {\displaystyle \approx 0.5} from the Chinchilla scaling paper. It's "strongly suggested" (but not statistically checked) that D o p t ( C ) ∝ N o p t ( C ) 0.4 ∝ C 0.28 {\displaystyle D_{opt}(C)\propto N_{opt}(C)^{0.4}\propto C^{0.28}} . This exponent corresponds to the ≈ 0.5 {\displaystyle \approx 0.5} from the Chinchilla scaling paper. The scaling law of L = L 0 + ( C 0 / C ) 0.048 {\displaystyle L=L_{0}+(C_{0}/C)^{0.048}} was confirmed during the training of GPT-3 (Figure 3.1 ). === Chinchilla scaling (Hoffmann, et al, 2022) === One particular scaling law ("Chinchilla scaling") states that, for a large language model (LLM) autoregressively trained for one epoch, with a cosine learning rate schedule, we have: { C = C 0 N D L = A N α + B D β + L 0 {\displaystyle {\begin{cases}C=C_{0}ND\\L={\frac {A}{N^{\alpha }}}+{\frac {B}{D^{\beta }}}+L_{0}\end{cases}}} where the variables are C {\displaystyle C} is the cost o

    Read more →
  • Social collaboration

    Social collaboration

    Social collaboration refers to processes that help multiple people or groups interact and share information to achieve common goals. Such processes find their 'natural' environment on the Internet, where collaboration and social dissemination of information are made easier by current innovations and the proliferation of the web. Sharing concepts on a digital collaboration environment often facilitates a "brainstorming" process, where new ideas may emerge due to the varied contributions of individuals. These individuals may hail from different walks of life, different cultures and different age groups, their diverse thought processes help in adding new dimensions to ideas, dimensions that previously may have been missed. A crucial concept behind social collaboration is that 'ideas are everywhere.' Individuals are able to share their ideas in an unrestricted environment as anyone can get involved and the discussion is not limited to only those who have domain knowledge. Social collaboration is also known as enterprise social networking, and the products to support it are often branded enterprise social networks (ESNs). It is important that we understand the rhythm of social collaboration. There needs to be a balance, with ease to move from focused solitary work to brainstorming for problem solving in group work. This critical balance can be achieved by creating structures or a work environment where it is not too rigid to prevent brainstorming in group work nor too loose to result in total chaos. Social collaboration should happen at the edge of chaos. Work practices should support social collaboration. The most effective environment is one that supports opportunistic planning. Opportunistic planning provides a general plan but then gives enough room for flexibility to change activities and tasks until the last moment. This way, people are able to cope up with unforeseen developments and not throwing away everything with one grand plan. == Comparison to social networking == Social collaboration is related to social networking, with the distinction that while social networking is individual-centric, social collaboration is entirely group-centric. Generally speaking, social networking means socializing for personal, professional or entertainment purposes, for example, LinkedIn and Facebook. Social collaboration, on the other hand, means working socially to achieve a common goal, for example, GitHub and Quora. Social networking services generally focus on individuals sharing messages in a more-or-less undirected way and receiving messages from many sources into a single personalized activity feed. Social collaboration services, on the other hand, focus on the identification of groups and collaboration spaces in which messages are explicitly directed at the group and the group activity feed is seen the same way by everyone. Social collaboration may refer to time-bound collaborations with an explicit goal to be completed or perpetual collaborations in which the goal is knowledge sharing (e.g. community of practice, online community). == Comparison to crowdsourcing == Social collaboration is similar to crowdsourcing as it involves individuals working together towards a common goal. Crowdsourcing is a method for harnessing specific information from a large, diverse group of people. Unlike social collaboration, which involves much communication and cooperation among a large group of people, crowdsourcing is more like individuals working towards the common goal relatively independently. Therefore, the process of working involves less communication. Andrea Grover, curator of a crowdsourcing art show, explained that collaboration among individuals is an appealing experience, because participation is "a low investment, with the possibility of a high return." == Social collaboration software == Notable social collaboration software includes Glip messaging, Google Apps, Knowledge Plaza Electronic Document System and Social Intranet, Microsoft Lync social collaboration tool for businesses, Slack, Weekdone for managers, and Wrike. == Future == Social collaboration is going to be used as a tool in companies to enhance productivity. Social workers could be able to use social collaboration tools to manage personal tasks, professional projects and social networks with other colleagues within the same organization. Social collaboration will serve as a platform to get people involved and connected. This kind of platform provides a spiritual training practice for social workers. Social collaboration software could help enhance the communication between customers and employees and build trust in the organization. When we need real-time chat, it would be excellent to include every participant in a shared and archived forum which keeps a record of important information and logs. So collaborators need not worry about losing important records while working towards the common goal. The interactive communication and synchronous environment promote understanding among colleagues. Collaboration helps in building strong relationships between workers, which in turn leads to faster problem solving. The close connection between workers and customers creates a scalable organization which naturally increases the trust and faith that customers have in the company. Therefore, the interactive customer relationship levels up customer satisfaction in ways that traditional collaboration methods cannot. Apart from its effect on the way work will be conducted in the future, social collaboration will also affect society. In the coming years social collaboration will be the driving force in societal change as more and more people work together to get their vision across to governments and governing agencies. An example of this is Change.org, an online petition tool where users can help bring their government's attention to pressing social issues that need to be addressed.

    Read more →
  • MIME Object Security Services

    MIME Object Security Services

    MIME Object Security Services (MOSS) is a protocol that uses the multipart/signed and multipart/encrypted framework to apply digital signature and encryption services to MIME objects. == Details == The services are offered through the use of end-to-end cryptography between an originator and a recipient at the application layer. Asymmetric (public key) cryptography is used in support of the digital signature service and encryption key management. Symmetric (secret key) cryptography is used in support of the encryption service. The procedures are intended to be compatible with a wide range of public key management approaches, including both ad hoc and certificate-based schemes. Mechanisms are provided to support many public key management approaches. == Spreading == MOSS was never widely deployed and is now abandoned, largely due to the popularity of PGP.

    Read more →
  • Defence Information Infrastructure

    Defence Information Infrastructure

    Defence Information Infrastructure (DII) is a secure military network owned by the United Kingdom's Ministry of Defence MOD. It is used by all branches of the armed forces, including the Royal Navy, British Army and Royal Air Force as well as MOD civil servants. It reaches to deployed bases and ships at sea, but not to aircraft in flight. In 2000, the MOD began to plan the systems replacement project. In March 2005, the MOD gave a contract to the Atlas Consortium, with EDS as prime contractor, for installation and management over 10 years. That has developed into a consortium made up of DXC Technology (formerly EDS), Fujitsu, Airbus Defence and Space (formerly EADS Defence & Security) and CGI (formerly Logica). Starting in May 2016, MOD users of DII begin to migrate to the New Style of IT within the defence to be known as MODNET; again supported by ATLAS. == Overview == DII supports 2,000 MOD sites with some 150,000 terminals (desktops and laptops) and 300,000 user accounts. It is designed to offer a high level of resilience, flexibility, and security in the provision of connectivity from ‘business space to battlespace’ in MOD offices in the UK, bases overseas, at sea, and on the front line. It aims to rationalise and improve IT provision for the defence sector in the 21st century; involving a major culture change for MOD users and their ways of working through a structure of shared working areas with controlled security and access. It should provide a records management system and search facility together with a range of office services. It hosts several hundred COTS (commercial off-the-shelf) and bespoke MOD applications from a range of suppliers judged to meet the required security standards. The network handles alphanumeric data, graphics, and video. The system carries information from Restricted to above-Secret levels, but users are able to see only the data and applications for which they are authorised. == Incremental approach == In order to de-risk the programme Atlas and the MOD took an incremental approach to the development and implementation of DII, with a separate contract for each increment. The extended timeline allowed the MOD flexibility in defining its requirements. Increment 1: Contract awarded March 2005. This covered 70,000 user access devices (UADs) and 200,000 user accounts in the Restricted and Secret domains in 680 fixed locations. Increment 2a: Contract awarded December 2006. This was for an additional 44,000 UADs and 58,000 user accounts in the Restricted and Secret domains, again in fixed locations. Increment 2b: Contract awarded September 2007: This extended DII(F) into the deployed environment with the provision of UADs to support land and maritime deployed operations. Increment 2c: Signed in January 2009. This extended the DII footprint into the above-Secret domain to support a number of key operations and intelligence initiatives. Increment 3a: Contract awarded January 2010. Atlas provided 42,000 UADs operating in the Restricted and Secret domains to the remaining MOD fixed sites. This supported some 60,000 personnel, notably within the RAF, at Joint Helicopter Command and other MOD locations. Increment 3a received an MOD Chief of Defence Materiel commendation. == Costs and transparency == The Ministry of Defence informed Parliament the system would cost £2.3bn, even though it knew the cost would be at least £5.8bn. By 2008 the programme was running at least 18 months late; had delivered only 29,000 of a contracted 63,000 terminals; and had delivered none of the contracted Secret capability. In January 2010 the Parliamentary Under-Secretary of State for Defence announced that the Ministry of Defence had authorised DII increment 3a at a cost of around £540 million to provide 42,000 terminals within the RAF and at Joint Helicopter Command. He stated that the project would deliver "benefits" worth over £1.6 billion over the 10 years of the contract. That year the project was scheduled to cost at least £7bn, however, the UK government said it might attempt to reduce this sum. By 2014 the rollout of all UK terminals was complete and a refresh of the original desktops and printers to new hardware underway. The overseas rollout was coming to an end and well over half the fleet, including aircraft carrier HMS Queen Elizabeth, equipped. The final part of Secret capability deployment was scheduled to complete in summer of 2014.

    Read more →
  • Artificial intelligence in spirituality

    Artificial intelligence in spirituality

    Some users of artificial intelligence (AI) technologies, especially chatbots, may develop beliefs that AI has or can attain supernatural or spiritual powers. AI models such as ChatGPT are turned to for fortune telling, mysticism and remote viewing. Recent and sudden advances in large language models have led to folk myths about their origin or capabilities, as well as their deification or worship by some users. Tucker Carlson has made similar claims, including directly to Sam Altman. Pope Leo XIV advised priests against using LLM models when it came to the creation of sermons.

    Read more →
  • Computer network

    Computer network

    In computer science, computer engineering, and telecommunications, a network is a group of communicating computers and peripherals known as hosts, which communicate data to other hosts via communication protocols, as facilitated by networking hardware. Within a computer network, hosts are identified by network addresses, which allow networking hardware to locate and identify hosts. Hosts may also have hostnames, memorable labels for the host nodes, which can be mapped to a network address using a hosts file or a name server such as Domain Name Service. The physical medium that supports information exchange includes wired media like copper cables, optical fibers, and wireless radio-frequency media. The arrangement of hosts and hardware within a network architecture is known as the network topology. The first computer network was created in 1940 when George Stibitz connected a terminal at Dartmouth to his Complex Number Calculator at Bell Labs in New York. Today, almost all computers are connected to a computer network, such as the global Internet or embedded networks such as those found in many modern electronic devices. Many applications have only limited functionality unless they are connected to a network. Networks support applications and services, such as access to the World Wide Web, digital video and audio, application and storage servers, printers, and email and instant messaging applications. == History == === Early origins (1940 – 1960s) === In 1940, George Stibitz of Bell Labs connected a teletype at Dartmouth to a Bell Labs computer running his Complex Number Calculator to demonstrate the use of computers at long distance. This was the first real-time, remote use of a computing machine. In the late 1950s, a network of computers was built for the U.S. military Semi-Automatic Ground Environment (SAGE) radar system using the Bell 101 modem. It was the first commercial modem for computers, released by AT&T Corporation in 1958. The modem allowed digital data to be transmitted over regular unconditioned telephone lines at a speed of 110 bits per second (bit/s). In 1959, Christopher Strachey filed a patent application for time-sharing in the United Kingdom and John McCarthy initiated the first project to implement time-sharing of user programs at MIT. Strachey passed the concept on to J. C. R. Licklider at the inaugural UNESCO Information Processing Conference in Paris that year. McCarthy was instrumental in the creation of three of the earliest time-sharing systems (the Compatible Time-Sharing System in 1961, the BBN Time-Sharing System in 1962, and the Dartmouth Time-Sharing System in 1963). In 1959, Anatoly Kitov proposed to the Central Committee of the Communist Party of the Soviet Union a detailed plan for the re-organization of the control of the Soviet armed forces and of the Soviet economy on the basis of a network of computing centers. Kitov's proposal was rejected, as later was the 1962 OGAS economy management network project. During the 1960s, Paul Baran and Donald Davies independently invented the concept of packet switching for data communication between computers over a network. Baran's work addressed adaptive routing of message blocks across a distributed network, but did not include routers with software switches, nor the idea that users, rather than the network itself, would provide the reliability. Davies' hierarchical network design included high-speed routers, communication protocols and the essence of the end-to-end principle. The NPL network, a local area network at the National Physical Laboratory (United Kingdom), pioneered the implementation of the concept in 1968-69 using 768 kbit/s links. Both Baran's and Davies' inventions were seminal contributions that influenced the development of computer networks. === ARPANET (1969 – 1974) === In 1962 and 1963, J. C. R. Licklider sent a series of memos to office colleagues discussing the concept of the "Intergalactic Computer Network", a computer network intended to allow general communications among computer users. This ultimately became the basis for the ARPANET, which began in 1969. That year, the first four nodes of the ARPANET were connected using 50 kbit/s circuits between the University of California at Los Angeles, the Stanford Research Institute, the University of California, Santa Barbara, and the University of Utah. Designed principally by Bob Kahn, the network's routing, flow control, software design and network control were developed by the IMP team working for Bolt Beranek & Newman. In the early 1970s, Leonard Kleinrock carried out mathematical work to model the performance of packet-switched networks, which underpinned the development of the ARPANET. His theoretical work on hierarchical routing in the late 1970s with student Farouk Kamoun remains critical to the operation of the Internet today. In 1973, Peter Kirstein put internetworking into practice at University College London (UCL), connecting the ARPANET to British academic networks, the first international heterogeneous computer network. That same year, Robert Metcalfe wrote a formal memo at Xerox PARC describing Ethernet, a local area networking system he created with David Boggs. It was inspired by the packet radio ALOHAnet, started by Norman Abramson and Franklin Kuo at the University of Hawaii in the late 1960s. Metcalfe and Boggs, with John Shoch and Edward Taft, also developed the PARC Universal Packet for internetworking. That year, the French CYCLADES network, directed by Louis Pouzin was the first to make the hosts responsible for the reliable delivery of data, rather than this being a centralized service of the network itself. === The internet (1974 – present) === In 1974, Vint Cerf and Bob Kahn published their seminal 1974 paper on internetworking, A Protocol for Packet Network Intercommunication. Later that year, Cerf, Yogen Dalal, and Carl Sunshine wrote the first Transmission Control Protocol (TCP) specification, RFC 675, coining the term Internet as a shorthand for internetworking. In July 1976, Metcalfe and Boggs published their paper "Ethernet: Distributed Packet Switching for Local Computer Networks" and in December 1977, together with Butler Lampson and Charles P. Thacker, they received U.S. patent 4063220A for their invention. In 1976, John Murphy of Datapoint Corporation created ARCNET, a token-passing network first used to share storage devices. In 1979, Robert Metcalfe pursued making Ethernet an open standard. In 1980, Ethernet was upgraded from the original 2.94 Mbit/s protocol to the 10 Mbit/s protocol, which was developed by Ron Crane, Bob Garner, Roy Ogus, Hal Murray, Dave Redell and Yogen Dalal. In 1986, the National Science Foundation (NSF) launched the National Science Foundation Network (NSFNET) as a general-purpose research network connecting various NSF-funded sites to each other and to regional research and education networks. In 1995, the transmission speed capacity for Ethernet increased from 10 Mbit/s to 100 Mbit/s. By 1998, Ethernet supported transmission speeds of 1 Gbit/s. Subsequently, higher speeds of up to 800 Gbit/s were added (as of 2025). The scaling of Ethernet has been a contributing factor to its continued use. In the 1980s and 1990s, as embedded systems were becoming increasingly important in factories, cars, and airplanes, network protocols were developed to allow the embedded computers to communicate. In the late 1990s and 2000s, ubiquitous computing and an Internet of Things became popular. === Commercial usage === In 1960, the commercial airline reservation system semi-automatic business research environment (SABRE) went online with two connected mainframes. In 1965, Western Electric introduced the first widely used telephone switch that implemented computer control in the switching fabric. In 1972, commercial services were first deployed on experimental public data networks in Europe. Public data networks in Europe, North America and Japan began using X.25 in the late 1970s and interconnected with X.75. This underlying infrastructure was used for expanding TCP/IP networks in the 1980s. In 1977, the first long-distance fiber network was deployed by GTE in Long Beach, California. == Hardware == === Network links === The transmission media used to link devices to form a computer network include electrical cable, optical fiber, and free space. In the OSI model, the software to handle the media is defined at layers 1 and 2 — the physical layer and the data link layer. Common examples of networking technologies include: Ethernet is a widely adopted family of networking technologies that use copper and fiber media in local area networks (LAN). The media and protocol standards that enable communication between networked devices over Ethernet are defined by IEEE 802.3. Wireless LAN standards, which use radio waves. Some standards use infrared signals as a transmission medium. Power line communication uses a building's power cabling to transmit

    Read more →
  • CryptoParty

    CryptoParty

    CryptoParty (Crypto-Party) is a grassroots global endeavour to introduce the basics of practical cryptography such as the Tor anonymity network, I2P, Freenet, key signing parties, disk encryption and virtual private networks to the general public. The project primarily consists of a series of free public workshops. == History == As a successor to the Cypherpunks of the 1990s, CryptoParty was conceived in late August 2012 by the Australian journalist Asher Wolf in a Twitter post following the passing of the Cybercrime Legislation Amendment Bill 2011 and the proposal of a two-year data retention law in that country, the Cybercrime Legislation Amendment Bill 2011. The DIY, self-organizing movement immediately went viral, with a dozen autonomous CryptoParties being organized within hours in cities throughout Australia, the US, the UK, and Germany. Many more parties were soon organized or held in Chile, The Netherlands, Hawaii, Asia, etc. Tor usage in Australia itself spiked, and CryptoParty London with 130 attendees—some of whom were veterans of the Occupy London movement—had to be moved from London Hackspace to the Google campus in east London's Tech City. As of mid-October 2012 some 30 CryptoParties have been held globally, some on a continuing basis, and CryptoParties were held on the same day in Reykjavik, Brussels, and Manila. The first draft of the 442-page CryptoParty Handbook (the hard copy of which is available at cost) was pulled together in three days using the book sprint approach, and was released 2012-10-04 under a CC BY-SA license. === Edward Snowden involvement === In May 2014, Wired reported that Edward Snowden, while employed by Dell as an NSA contractor, organized a local CryptoParty at a small hackerspace in Honolulu, Hawaii on December 11, six months before becoming well known for leaking tens of thousands of secret U.S. government documents. During the CryptoParty, Snowden taught 20 Hawaii residents how to encrypt their hard drives and use the Internet anonymously. The event was filmed by Snowden's then-girlfriend, but the video has never been released online. In a follow-up post to the CryptoParty wiki, Snowden pronounced the event a "huge success." == Media response == In 2013, CryptoParty received messages of support from the Electronic Frontier Foundation and (purportedly) AnonyOps, as well as the NSA whistleblower Thomas Drake, WikiLeaks central editor Heather Marsh, and Wired reporter Quinn Norton. Eric Hughes, the author of A Cypherpunk's Manifesto nearly two decades before, delivered the keynote address, Putting the Personal Back in Personal Computers, at the Amsterdam CryptoParty on 2012-09-27. Marcin de Kaminski, founding member of Piratbyrån which in turn founded The Pirate Bay, regarded CryptoParty as the most important civic project in cryptography in 2012, and Cory Doctorow has characterized a CryptoParty as being "like a Tupperware party for learning crypto." Der Spiegel in December 2014 mentioned "crypto parties" in the wake of the Edward Snowden leaks in an article about the NSA.

    Read more →
  • Opinion Space

    Opinion Space

    Developed at UC Berkeley, "Opinion Space" (also known as The Collective Discovery Engine) is a social media technology designed to help communities generate and exchange ideas about important issues and policies. Version 1.0 was launched on April 4, 2009, at UC Berkeley, and explored the question "Do you think legalizing marijuana is a good idea?" It has since undergone 4 different iterations, and been used in partnership with various organizations including The Occupy movement (Version 4.0, 5/24/2013) and the African Robots Network (Version 4.0, 5/25/2013). Opinion Space has also been used in collaboration with the United States State Department and the University of California's Berkeley Center for New Media (Version 2.0, 12/1/2009 and Version 3.0, 2/25/2012) to gain public perspective on foreign policy issues. Then U.S. Secretary of State Hillary Rodham Clinton explained, "Opinion Space will harness the power of connection technologies to provide a unique forum for international dialogue. This is...an opportunity to extend our engagement beyond the halls of government directly to the people of the world" (2010). The website uses data visualization and statistical analysis to present and develop public opinion and ideas. Opinion Space is a self-organizing system that uses an intuitive graphical "map" that displays patterns, trends, and insights as they emerge and employs the wisdom of crowds to identify and highlight the most insightful ideas. The system uses a game model that incorporates techniques from deliberative polling, collaborative filtering, and multidimensional visualization.

    Read more →
  • Chirplet transform

    Chirplet transform

    In signal processing, the chirplet transform is an inner product of an input signal with a family of analysis primitives called chirplets. Similar to the wavelet transform, chirplets are usually generated from (or can be expressed as being from) a single mother chirplet (analogous to the so-called mother wavelet of wavelet theory). == Definitions == The term chirplet transform was coined by Steve Mann, as the title of the first published paper on chirplets. The term chirplet itself (apart from chirplet transform) was also used by Steve Mann, Domingo Mihovilovic, and Ronald Bracewell to describe a windowed portion of a chirp function. In Mann's words: A wavelet is a piece of a wave, and a chirplet, similarly, is a piece of a chirp. More precisely, a chirplet is a windowed portion of a chirp function, where the window provides some time localization property. In terms of time–frequency space, chirplets exist as rotated, sheared, or other structures that move from the traditional parallelism with the time and frequency axes that are typical for waves (Fourier and short-time Fourier transforms) or wavelets. The chirplet transform thus represents a rotated, sheared, or otherwise transformed tiling of the time–frequency plane. Although chirp signals have been known for many years in radar, pulse compression, and the like, the first published reference to the chirplet transform described specific signal representations based on families of functions related to one another by time–varying frequency modulation or frequency varying time modulation, in addition to time and frequency shifting, and scale changes. In that paper, the Gaussian chirplet transform was presented as one such example, together with a successful application to ice fragment detection in radar (improving target detection results over previous approaches). The term chirplet (but not the term chirplet transform) was also proposed for a similar transform, apparently independently, by Mihovilovic and Bracewell later that same year. == Applications == The first practical application of the chirplet transform was in water-human-computer interaction (WaterHCI) for marine safety, to assist vessels in navigating through ice-infested waters, using marine radar to detect growlers (small iceberg fragments too small to be visible on conventional radar, yet large enough to damage a vessel). Other applications of the chirplet transform in WaterHCI include the SWIM (Sequential Wave Imprinting Machine). More recently other practical applications have been developed, including image processing (e.g. where there is periodic structure imaged through projective geometry), as well as to excise chirp-like interference in spread spectrum communications, in EEG processing, and Chirplet Time Domain Reflectometry. == Extensions == The warblet transform is a particular example of the chirplet transform introduced by Mann and Haykin in 1992 and now widely used. It provides a signal representation based on cyclically varying frequency modulated signals (warbling signals).

    Read more →
  • Cipher device

    Cipher device

    A cipher device was a term used by the US military in the first half of the 20th century to describe a manually operated cipher equipment that converted the plaintext into ciphertext or vice versa. A similar term, cipher machine, was used to describe the cipher equipment that required external power for operation. Cipher box or crypto box is a physical cryptographic device used to encrypt and decrypt messages between plaintext (unencrypted) and ciphertext (encrypted or secret) forms. The ciphertext is suitable for transmission over a channel, such as radio, that might be observed by an adversary the communicating parties wish to conceal the plaintext from.

    Read more →
  • Omni-Path

    Omni-Path

    Omni-Path Architecture (OPA) is a high-performance communication architecture developed by Intel. It aims for low communication latency, low power consumption and a high throughput. It directly competes with InfiniBand. Intel planned to develop technology based on this architecture for exascale computing. The current owner of Omni-Path is Cornelis Networks. == History == Production of Omni-Path products started in 2015 and delivery of these products started in the first quarter of 2016. In November 2015, adapters based on the 2-port "Wolf River" ASIC were announced, using QSFP28 connectors with channel speeds up to 100 Gbit/s. Simultaneously, switches based on the 48-port "Prairie River" ASIC were announced. First models of that series were available starting in 2015. In April 2016, implementation of the InfiniBand "verbs" interface for the Omni-Path fabric was discussed. In October 2016, IBM, Hewlett Packard Enterprise, Dell, Lenovo, Samsung, Seagate Technology, Micron Technology, Western Digital and SK Hynix announced a joint consortium called Gen-Z to develop an open specification and architecture for non-volatile storage and memory products—including Intel's 3D Xpoint technology—which might in part compete against Omni-Path. Intel offered their Omni-Path products and components via other (hardware) vendors. For example, Dell EMC offered Intel Omni-Path as Dell Networking H-series, following the naming-standard of Dell Networking in 2017. In July 2019, Intel announced it would not continue development of Omni-Path networks and canceled OPA 200 series (200-Gbps variant of Omni-Path). In September 2020, Intel announced that the Omni-Path network products and technology would be spun out into a new venture with Cornelis Networks. Intel would continue to maintain support for legacy Omni-Path products, while Cornelis Networks continues the product line, leveraging existing Intel intellectual property related to Omni-Path architecture. In 2021, Cornelis announced Omni-Path Express, which replaces PSM2-based drivers and middleware, which trace back to PathScale's PSM created in 2003, for the existing Omni-Path hardware, with a native libfabric provider.

    Read more →
  • Transmission security

    Transmission security

    Transmission security (TRANSEC) is the component of communications security (COMSEC) that results from the application of measures designed to protect transmissions from interception and exploitation by means other than cryptanalysis. Goals of transmission security include: Low probability of interception (LPI) Low probability of detection (LPD) Antijam — resistance to jamming (EPM or ECCM) This involves securing communication links from being compromised by techniques like jamming, eavesdropping, and signal interception. TRANSEC includes the use of frequency hopping, spread spectrum and the physical protection of communication links to obscure the patterns of transmission. It is particularly vital in military and government communication systems, where the security of transmitted data is critical to prevent adversaries from gathering intelligence or disrupting operations. TRANSEC is often implemented alongside COMSEC (Communications Security) to form a comprehensive approach to communication security. Methods used to achieve transmission security include frequency hopping and spread spectrum where the required pseudorandom sequence generation is controlled by a cryptographic algorithm and key. Such keys are known as transmission security keys (TSK). Modern U.S. and NATO TRANSEC-equipped radios include SINCGARS and HAVE QUICK.

    Read more →
  • Kounta (software company)

    Kounta (software company)

    Kounta is an Australian software company founded in 2012. The company's flagship product, Kounta, comprises a cloud based point of sale mobile app. == History == Kounta was founded in 2012 by entrepreneur Nick Cloete. The company is headquartered in Sydney, Australia. In 2012, the company launched its flagship product, Kounta, a hospitality-focused point of sale (POS) mobile app for iPad, Android, Mac, and Windows. The app was initially a web-based application, and later developed into an online cash register and inventory management system that allows businesses to take payments from customers via mobile devices. The app has been made available for iPad, iPhone, and Android devices; as well as iOS, Windows, and other peripherals. In 2012, Kounta partnered with Epson, providing a cloud-based POS platform for Epson printers. In 2013, the company formed a partnership with PayPal, integrating cashless and cardless transaction options via PayPal's mobile app. In 2014, MYOB (company) made an undisclosed investment towards Kounta. This partnership led to the development of MYOB Kounta, a co-branded application merging Kounta's POS with MYOB's application software. MYOB Kounta launched in October of the same year. In 2016, Kounta announced a partnership with the Commonwealth Bank of Australia to include the Kounta app onto "Albert", the bank's EFTPOS tablet, which allowed the Commonwealth Bank of Australia to become the first bank to manage all customers operations from a single device and mobile application. == Technology == The Kounta POS is a software-as-a-service (SaaS) that runs as an application in web browsers as well as natively on iOS and Android operating systems. Kounta also incorporates an Open API, making it possible for other software providers to integrate complementary apps, further extending the software's use. Traditional IT tasks, such as data backup and encryption, hardware maintenance, and server upgrades are handled by Kounta's data center. Kounta is made accessible via paid monthly subscription licenses. == Acquisition by Lightspeed == In October 2019, Kounta was acquired by Lightspeed, an advanced commerce platform for retail, hospitality, and golf businesses based in Montreal, Canada. Lightspeed acquired Kounta for $35.3 million USD.

    Read more →
  • Plaintext

    Plaintext

    In cryptography, plaintext usually means unencrypted information pending input into cryptographic algorithms, usually encryption algorithms. This usually refers to data that is transmitted or stored unencrypted. == Overview == With the advent of computing, the term plaintext expanded beyond human-readable documents to mean any data, including binary files, in a form that can be viewed or used without requiring a key or other decryption device. Information—a message, document, file, etc.—if to be communicated or stored in an unencrypted form is referred to as plaintext. Plaintext is used as input to an encryption algorithm; the output is usually termed ciphertext, particularly when the algorithm is a cipher. Codetext is less often used, and almost always only when the algorithm involved is actually a code. Some systems use multiple layers of encryption, with the output of one encryption algorithm becoming "plaintext" input for the next. == Secure handling == Insecure handling of plaintext can introduce weaknesses into a cryptosystem by letting an attacker bypass the cryptography altogether. Plaintext is vulnerable in use and in storage, whether in electronic or paper format. Physical security means the securing of information and its storage media from physical, attack—for instance by someone entering a building to access papers, storage media, or computers. Discarded material, if not disposed of securely, may be a security risk. Even shredded documents and erased magnetic media might be reconstructed with sufficient effort. If plaintext is stored in a computer file, the storage media, the computer and its components, and all backups must be secure. Sensitive data is sometimes processed on computers whose mass storage is removable, in which case physical security of the removed disk is vital. In the case of securing a computer, useful (as opposed to handwaving) security must be physical (e.g., against burglary, brazen removal under cover of supposed repair, installation of covert monitoring devices, etc.), as well as virtual (e.g., operating system modification, illicit network access, Trojan programs). Wide availability of keydrives, which can plug into most modern computers and store large quantities of data, poses another severe security headache. A spy (perhaps posing as a cleaning person) could easily conceal one, and even swallow it if necessary. Discarded computers, disk drives and media are also a potential source of plaintexts. Most operating systems do not actually erase anything— they simply mark the disk space occupied by a deleted file as 'available for use', and remove its entry from the file system directory. The information in a file deleted in this way remains fully present until overwritten at some later time when the operating system reuses the disk space. With even low-end computers commonly sold with many gigabytes of disk space and rising monthly, this 'later time' may be months later, or never. Even overwriting the portion of a disk surface occupied by a deleted file is insufficient in many cases. Peter Gutmann of the University of Auckland wrote a celebrated 1996 paper on the recovery of overwritten information from magnetic disks; areal storage densities have gotten much higher since then, so this sort of recovery is likely to be more difficult than it was when Gutmann wrote. Modern hard drives automatically remap failing sectors, moving data to good sectors. This process makes information on those failing, excluded sectors invisible to the file system and normal applications. Special software, however, can still extract information from them. Some government agencies (e.g., US NSA) require that personnel physically pulverize discarded disk drives and, in some cases, treat them with chemical corrosives. This practice is not widespread outside government, however. Garfinkel and Shelat (2003) analyzed 158 second-hand hard drives they acquired at garage sales and the like, and found that less than 10% had been sufficiently sanitized. The others contained a wide variety of readable personal and confidential information. See data remanence. Physical loss is a serious problem. The US State Department, Department of Defense, and the British Secret Service have all had laptops with secret information, including in plaintext, lost or stolen. Appropriate disk encryption techniques can safeguard data on misappropriated computers or media. On occasion, even when data on host systems is encrypted, media that personnel use to transfer data between systems is plaintext because of poorly designed data policy. For example, in October 2007, HM Revenue and Customs lost CDs that contained the unencrypted records of 25 million child benefit recipients in the United Kingdom. Modern cryptographic systems resist known plaintext or even chosen plaintext attacks, and so may not be entirely compromised when plaintext is lost or stolen. Older systems resisted the effects of plaintext data loss on security with less effective techniques—such as padding and Russian copulation to obscure information in plaintext that could be easily guessed.

    Read more →
  • Social profiling

    Social profiling

    Social profiling is the process of constructing a social media user's profile using their social data. In general, profiling refers to the data science process of generating a person's profile with computerized algorithms and technology. There are various platforms for sharing this information with the proliferation of growing popular social networks, including but not limited to LinkedIn, Google+, Facebook and Twitter. == Social profile and social data == A person's social data refers to the personal data that they generate either online or offline (for more information, see social data revolution). A large amount of these data, including one's language, location and interest, is shared through social media and social network. Users join multiple social media platforms and their profiles across these platforms can be linked using different methods to obtain their interests, locations, content, and friend list. Altogether, this information can be used to construct a person's social profile. Meeting the user's satisfaction level for information collection is becoming more challenging. This is because of too much "noise" generated, which affects the process of information collection due to explosively increasing online data. Social profiling is an emerging approach to overcome the challenges faced in meeting user's demands by introducing the concept of personalized search while keeping in consideration user profiles generated using social network data. A study reviews and classifies research inferring users social profile attributes from social media data as individual and group profiling. The existing techniques along with utilized data sources, the limitations, and challenges were highlighted. The prominent approaches adopted include machine learning, ontology, and fuzzy logic. Social media data from Twitter and Facebook have been used by most of the studies to infer the social attributes of users. The literature showed that user social attributes, including age, gender, home location, wellness, emotion, opinion, relation, influence are still need to be explored. === Personalized meta-search engines === The ever-increasing online content has resulted in the lack of proficiency of centralized search engine's results. It can no longer satisfy user's demand for information. A possible solution that would increase coverage of search results would be meta-search engines, an approach that collects information from numerous centralized search engines. A new problem thus emerges, that is too much data and too much noise is generated in the collection process. Therefore, a new technique called personalized meta-search engines was developed. It makes use of a user's profile (largely social profile) to filter the search results. A user's profile can be a combination of a number of things, including but not limited to, "a user's manual selected interests, user's search history", and personal social network data. == Social media profiling == According to Samuel D. Warren II and Louis Brandeis (1890), disclosure of private information and the misuse of it can hurt people's feelings and cause considerable damage in people's lives. Social networks provide people access to intimate online interactions; therefore, information access control, information transactions, privacy issues, connections and relationships on social media have become important research fields and are subjects of concern to the public. Ricard Fogues and other co-authors state that "any privacy mechanism has at its base an access control", that dictate "how permissions are given, what elements can be private, how access rules are defined, and so on". Current access control for social media accounts tend to still be very simplistic: there is very limited diversity in the category of relationships on for social network accounts. User's relationships to others are, on most platforms, only categorized as "friend" or "non-friend" and people may leak important information to "friends" inside their social circle but not necessarily users to they consciously want to share the information to. The below section is concerned with social media profiling and what profiling information on social media accounts can achieve. === Privacy leaks === A lot of information is voluntarily shared on online social networks, such as photos and updates on life activities (new job, hobbies, etc.). People rest assured that different social network accounts on different platforms will not be linked as long as they do not grant permission to these links. However, according to Diane Gan, information gathered online enables "target subjects to be identified on other social networking sites such as Foursquare, Instagram, LinkedIn, Facebook and Google+, where more personal information was leaked". The majority of social networking platforms use the "opt out approach" for their features. If users wish to protect their privacy, it is user's own responsibility to check and change the privacy settings as a number of them are set to default option. A major social network platforms have developed geo-tag functions and are in popular usage. This is concerning because 39% of users have experienced profiling hacking; 78% burglars have used major social media networks and Google Street-view to select their victims; and an astonishing 54% of burglars attempted to break into empty houses when people posted their status updates and geo-locations. === Facebook === Formation and maintenance of social media accounts and their relationships with other accounts are associated with various social outcomes. In 2015, for many firms, customer relationship management is essential and is partially done through Facebook. Before the emergence and prevalence of social media, customer identification was primarily based upon information that a firm could directly acquire: for example, it may be through a customer's purchasing process or voluntary act of completing a survey/loyalty program. However, the rise of social media has greatly reduced the approach of building a customer's profile/model based on available data. Marketers now increasingly seek customer information through Facebook; this may include a variety of information users disclose to all users or partial users on Facebook: name, gender, date of birth, e-mail address, sexual orientation, marital status, interests, hobbies, favorite sports team(s), favorite athlete(s), or favorite music, and more importantly, Facebook connections. However, due to the privacy policy design, acquiring true information on Facebook is no trivial task. Often, Facebook users either refuse to disclose true information (sometimes using pseudonyms) or setting information to be only visible to friends, Facebook users who "LIKE" your page are also hard to identify. To do online profiling of users and cluster users, marketers and companies can and will access the following kinds of data: gender, the IP address and city of each user through the Facebook Insight page, who "LIKED" a certain user, a page list of all the pages that a person "LIKED" (transaction data), other people that a user follow (even if it exceeds the first 500, which we usually can not see) and all the publicly shared data. === Twitter === First launched on the Internet in March 2006, Twitter is a platform on which users can connect and communicate with any other user in just 280 characters. Like Facebook, Twitter is also a crucial tunnel for users to leak important information, often unconsciously, but able to be accessed and collected by others. According to Rachel Nuwer, in a sample of 10.8 million tweets by more than 5,000 users, their posted and publicly shared information are enough to reveal a user's income range. A postdoctoral researcher from the University of Pennsylvania, Daniel Preoţiuc-Pietro and his colleagues were able to categorize 90% of users into corresponding income groups. Their existing collected data, after being fed into a machine-learning model, generated reliable predictions on the characteristics of each income group. The mobile app called Streamd.in displays live tweets on Google Maps by using geo-location details attached to the tweet, and traces the user's movement in the real world. === Profiling photos on social network === The advent and universality of social media networks have boosted the role of images and visual information dissemination. Many types of visual information on social media transmit messages from the author, location information and other personal information. For example, a user may post a photo of themselves in which landmarks are visible, which can enable other users to determine where they are. In a study done by Cristina Segalin, Dong Seon Cheng and Marco Cristani, they found that profiling user posts' photos can reveal personal traits such as personality and mood. In the study, convolutional neural networks (CNNs) is introduced. It builds on the main characteristics of computational

    Read more →